mandoc/configure.local.example - diff

Return to configure.local.example CVS log

Up to [cvsweb.bsd.lv] / mandoc

Diff for /mandoc/configure.local.example between version 1.10 and 1.15

version 1.10, 2015/11/07 13:14:21

version 1.15, 2016/07/19 21:31:55

Line 1

# $Id$

# Permission to use, copy, modify, and distribute this software for any

# purpose with or without fee is hereby granted, provided that the above

Line 65 MANPATH_DEFAULT="/usr/share/man:/usr/X11R6/man:/usr/lo

# If you do not want uname(3) to be called but instead want a fixed

# string to be used, use the following line:

OSNAME="OpenBSD 5.6"

OSNAME="OpenBSD 6.0"

# The following installation directories are used.

# It is possible to set only one or a few of these variables,

Line 91 MANDIR="${PREFIX}/man"

HAVE_MANPATH=1

# Force usage of man.conf(5).

# If it does not exist or contains no valid configuration,

# man(1), makewhatis(8), and apropos(1) will not work properly.

HAVE_MANPATH=0

# Some distributions may want to avoid naming conflicts

Line 113 MANM_ROFF="mandoc_roff" # default is "roff"

Line 111 MANM_ROFF="mandoc_roff" # default is "roff"

MANM_EQN="mandoc_eqn" # default is "eqn"

MANM_TBL="mandoc_tbl" # default is "tbl"

# Some distributions may want to avoid naming conflicts

# Some distributions may want to avoid naming conflicts with

# with other man(1) and soelim(1) utilities.

# other man(1), apropos(1), makewhatis(8), or soelim(1) utilities.

# If you want to change the names of binary programs,

# the following alternative names are suggested.

# Using different names is possible as well.

# This changes the names of the installed section 1 manual pages as well.

# This changes the names of the installed section 1 and section 8

# manual pages as well.

# It is possible to set only one or two of these variables,

# there is no need to copy the whole block.

BINM_MAN=mman # default is "man"

BINM_APROPOS=mapropos # default is "apropos"

BINM_WHATIS=mwhatis # default is "whatis"

BINM_MAKEWHATIS=mandocdb # default is "makewhatis"

BINM_SOELIM=msoelim # default is "soelim"

# It is possible to change the utility program used for installation

# Before falling back to the bundled version of the ohash(3) hashing

# and the modes files are installed with. The defaults are:

# library, autoconfiguration tries the following linker flag to

# link against your system version. If you do have ohash(3) on

# your system but it needs different linker flags, set the following

# variable to specify the required linker flags.

INSTALL="install"

LD_OHASH="-lutil"

INSTALL_PROGRAM="${INSTALL} -m 0555"

INSTALL_LIB="${INSTALL} -m 0444"

INSTALL_MAN="${INSTALL} -m 0444"

INSTALL_DATA="${INSTALL} -m 0444"

# --- user settings related to database support ------------------------

# By default, building makewhatis(8) and apropos(1) is enabled.

# To disable it, for example to avoid the dependency on SQLite3,

# use the following line. It that case, the remaining settings

# in this section are irrelevant.

BUILD_DB=0

# Two libraries are needed: SQLite3 and ohash(3).

# Autoconfiguration tries the following linker flags to find them.

# If none of these work, add a working DBLIB line to configure.local,

# disabling autodetection for library directories.

DBLIB="-lsqlite3"

DBLIB="-lsqlite3 -lutil"

DBLIB="-L/usr/local/lib -lsqlite3"

# When library autodetection decides to use -L/usr/local/lib,

# -I/usr/local/include is automatically added to CFLAGS.

# If you manually set DBLIB to something including -L/usr/local/lib,

# If you manually set LD_OHASH to something including -L/usr/local/lib,

# chances are you will also need the following line:

CFLAGS="${CFLAGS} -I/usr/local/include"

# Some distributions may want to avoid naming conflicts

# Some platforms may need additional linker flags to link against libmandoc

# with another implementation of apropos(1) and makewhatis(8).

# that are not autodetected.

# If you want to change the names of the binary programs,

# For example, Solaris 9 and 10 need -lrt for nanosleep(2).

# the following alternative names are suggested.

# Using other names is possible as well.

# This changes the names of the installed section 1 and section 8

# manual pages as well.

# It is possible to set only one or two of these variables,

# there is no need to copy the whole block.

BINM_APROPOS=mapropos # default is "apropos"

LDADD="-lrt"

BINM_WHATIS=mwhatis # default is "whatis"

BINM_MAKEWHATIS=mandocdb # default is "makewhatis"

# Some systems may want to set additional linker flags for all the

# binaries, not only for those using libmandoc, for example for

# hardening options.

LDFLAGS="-Wl,-z,relro"

# It is possible to change the utility program used for installation

# and the modes files are installed with. The defaults are:

INSTALL="install"

INSTALL_PROGRAM="${INSTALL} -m 0555"

INSTALL_LIB="${INSTALL} -m 0444"

INSTALL_MAN="${INSTALL} -m 0444"

INSTALL_DATA="${INSTALL} -m 0444"

# When using the "homebrew" package manager on Mac OS X, the actual

# manuals are located in a so-called "cellar" and only symlinked

# into the manual trees. To allow mandoc to follow such symlinks,

Line 180 BINM_MAKEWHATIS=mandocdb # default is "makewhatis"

Line 172 BINM_MAKEWHATIS=mandocdb # default is "makewhatis"

PREFIX="/usr/local"

HOMEBREWDIR="${PREFIX}/Cellar"

# --- user settings related man.cgi ------------------------------------

# --- user settings related to man.cgi ---------------------------------

# By default, building man.cgi(8) is disabled. To enable it, copy

# cgi.h.example to cgi.h, edit it, and use the following line.

# Obviously, this requires that BUILD_DB is enabled, too.

BUILD_CGI=1

Line 218 CGIBINDIR="${WWWPREFIX}/cgi-bin"

Line 209 CGIBINDIR="${WWWPREFIX}/cgi-bin"

CC=cc

# IBM AIX may need:

CC=xlc

# The default compiler flags are:

CFLAGS="-g -W -Wall -Wstrict-prototypes -Wno-unused-parameter -Wwrite-strings"

# IBM AIX xlc does not support -W; in that case, please use:

CFLAGS="-g"

# In rare cases, it may be required to skip individual automatic tests.

# Each of the following variables can be set to 0 (test will not be run

# and will be regarded as failed) or 1 (test will not be run and will

# be regarded as successful).

HAVE_DIRENT_NAMLEN=0

HAVE_FGETLN=0

HAVE_ERR=0

HAVE_FTS=0

HAVE_GETLINE=0

HAVE_GETSUBOPT=0

HAVE_MMAP=0

HAVE_ISBLANK=0

HAVE_MKDTEMP=0

HAVE_OHASH=0

HAVE_PLEDGE=0

HAVE_PROGNAME=0

HAVE_REALLOCARRAY=0

HAVE_REWB_BSD=0

HAVE_REWB_SYSV=0

HAVE_STRCASESTR=0

HAVE_STRINGLIST=0

HAVE_STRLCAT=0

HAVE_STRLCPY=0

HAVE_STRPTIME=0

HAVE_STRSEP=0

HAVE_STRTONUM=0

HAVE_VASPRINTF=0

HAVE_SQLITE3=0

HAVE_WCHAR=0

HAVE_SQLITE3_ERRSTR=0

HAVE_OHASH=0

CVSweb