mandoc/configure.local.example - diff

Return to configure.local.example CVS log

Up to [cvsweb.bsd.lv] / mandoc

Diff for /mandoc/configure.local.example between version 1.22 and 1.43

version 1.22, 2016/11/19 15:24:51

version 1.43, 2021/09/20 13:25:42

Line 1

# $Id$

# Permission to use, copy, modify, and distribute this software for any

# purpose with or without fee is hereby granted, provided that the above

Line 20

# and put any of these settings into it if ./configure autodetection

# fails or if you want to make different choices for other reasons.

# If autodetection fails, please tell <tech@mdocml.bsd.lv>.

# If autodetection fails, please tell <tech@mandoc.bsd.lv>.

# We recommend that you write ./configure.local from scratch and

# only put the lines there you need. This file contains examples.

Line 28

# --- user settings relevant for all builds ----------------------------

# By default, "cc" is used as the C compiler, but it can be overridden.

# For example, the system compiler in SunOS 5.9 may not provide <stdint.h>,

# which may require this line:

CC=gcc

# IBM AIX may need:

CC=xlc

# By default, "ar" is used as the library archive builder, but it

# can be overridden. For example, NixOS may not have ar(1) in the

# PATH, but may want to specify an absolute path instead.

AR=ar

# For -Tutf8 and -Tlocale operation, mandoc(1) requires <locale.h>

# providing setlocale(3) and <wchar.h> providing wcwidth(3) and

# putwchar(3) with a wchar_t storing UCS-4 values. Theoretically,

Line 62 UTF8_LOCALE=en_US.UTF-8

Line 75 UTF8_LOCALE=en_US.UTF-8

MANPATH_DEFAULT="/usr/share/man:/usr/X11R6/man:/usr/local/man"

# Validation of cross references with mandoc -Tlint only looks

# for manual pages in the following directories:

MANPATH_BASE="/usr/share/man:/usr/X11R6/man"

# When man(1) is called with the -S option and no manual page is

# found matching the requested name and the requested architecture,

# it tries to figure out whether the requested architecture is valid

# for the present operating system. Normally, ./configure detects

# the operating system using uname(1). If that fails or is not

# desired, either of the following lines can be used:

OSENUM=MANDOC_OS_NETBSD

OSENUM=MANDOC_OS_OPENBSD

OSENUM=MANDOC_OS_OTHER

# In manual pages written in the mdoc(7) language, the operating system

# version is displayed in the page footer line. If an operating system

# is specified as an argument to the .Os macro, that is always used.

Line 72 MANPATH_DEFAULT="/usr/share/man:/usr/X11R6/man:/usr/lo

Line 101 MANPATH_DEFAULT="/usr/share/man:/usr/X11R6/man:/usr/lo

# If you do not want uname(3) to be called but instead want a fixed

# string to be used, use the following line:

OSNAME="OpenBSD 6.0"

OSNAME="OpenBSD 7.0"

# The following installation directories are used.

# It is possible to set only one or a few of these variables,

Line 85 BINDIR="${PREFIX}/bin"

Line 114 BINDIR="${PREFIX}/bin"

SBINDIR="${PREFIX}/sbin"

MANDIR="${PREFIX}/man"

# If BINDIR and SBINDIR are not subdirectories of the same parent

# directory or if the basename(1) of BINDIR differs from "bin",

# the relative path from SBINDIR to BINDIR is also needed.

# The default is:

BIN_FROM_SBIN="../bin"

# Some distributions may want to avoid naming conflicts

# with the configuration files of other man(1) implementations.

# This changes the name of the installed section 5 manual page as well.

MANM_MANCONF="mandoc.conf" # default is "man.conf"

# Some distributions may want to avoid naming conflicts among manuals.

Line 119 BINM_WHATIS=mwhatis # default is "whatis"

Line 156 BINM_WHATIS=mwhatis # default is "whatis"

BINM_MAKEWHATIS=mandocdb # default is "makewhatis"

BINM_SOELIM=msoelim # default is "soelim"

# If less(1) is available, it is used as the default manual pager.

# Otherwise, more(1) is used: its existence is required by POSIX.

# It is possible to force using a different default pager, either

# by giving the name of a program found in the PATH, or by giving

# an absolute path.

BINM_PAGER=pg # default is "less" or "more"

# Some distributions do not want hardlinks

# between installed binary programs.

# Set the following variable to use symbolic links instead.

# It is also used for links between manual pages.

# It is only used by the install* targets.

# When using this, DESTDIR must be empty or an absolute path.

LN="ln -sf" # default is "ln -f"

# Before falling back to the bundled version of the ohash(3) hashing

# library, autoconfiguration tries the following linker flag to

# link against your system version. If you do have ohash(3) on

Line 127 BINM_SOELIM=msoelim # default is "soelim"

Line 181 BINM_SOELIM=msoelim # default is "soelim"

LD_OHASH="-lutil"

# When library autodetection decides to use -L/usr/local/lib,

# -I/usr/local/include is automatically added to CFLAGS.

# If you manually set LD_OHASH to something including -L/usr/local/lib,

# chances are you will also need the following line:

CFLAGS="${CFLAGS} -I/usr/local/include"

# Some platforms may need an additional linker flag for nanosleep(2).

# If none is needed or it is -lrt, it is autodetected.

# Otherwise, set the following variable.

LD_NANOSLEEP="-lrt"

# Some platforms may need an additional linker flag for recvmsg(2).

# If none is needed or it is -lsocket, it is autodetected.

# Otherwise, set the following variable.

LD_RECVMSG="-lsocket"

# Some platforms might need additional linker flags to link against

# libmandoc that are not autodetected, though no such cases are

# currently known.

Line 161 INSTALL_LIB="${INSTALL} -m 0444"

Line 214 INSTALL_LIB="${INSTALL} -m 0444"

INSTALL_MAN="${INSTALL} -m 0444"

INSTALL_DATA="${INSTALL} -m 0444"

# When using the "homebrew" package manager on Mac OS X, the actual

# By default, makewhatis(8) can only read from the paths passed on the

# manuals are located in a so-called "cellar" and only symlinked

# command line or configured in man.conf(5).

# into the manual trees. To allow mandoc to follow such symlinks,

# But some package managers on some operating systems store manual pages

# you have to specify the physical location of the cellar as returned

# in separate "cellar" or "store" directories and only symlink them

# by realpath(3), for example:

# into the manual trees.

# To support one or more such package managers, give makewhatis(8)

# read access to the cellars and stores on your system, in the form

# of a colon-separated path:

# Homebrow package manager on Mac OS X:

PREFIX="/usr/local"

HOMEBREWDIR="${PREFIX}/Cellar"

READ_ALLOWED_PATH="${PREFIX}/Cellar"

# Nix package manager and/or NixOS Linux distribution:

READ_ALLOWED_PATH="/nix/store"

# GNU Guix package manager and/or GNU Guix Linux distribution:

READ_ALLOWED_PATH="/gnu/store"

# If multiple package managers are used concurrently:

PREFIX="/usr/local"

READ_ALLOWED_PATH="/nix/store:${PREFIX}/Cellar"

# --- user settings for the mandoc(3) library --------------------------

# By default, libmandoc.a is not installed. It is almost never needed

Line 195 BUILD_CGI=1

Line 262 BUILD_CGI=1

# The remaining settings in this section are only relevant if BUILD_CGI

# is enabled. Otherwise, they have no effect either way.

# By default, man.cgi(8) is linked statically.

# By default, man.cgi(8) is linked statically if the compiler supports

# Some systems do not support static linking, for example Mac OS X.

# the -static option. If automatic detection fails, you can force

# In that case, use the following line:

# static linking of man.cgi(8).

STATIC=

STATIC="-static"

# Some systems, for example Linux, require -pthread for static linking:

# Some systems may require -pthread for static linking:

STATIC="-static -pthread"

# If static linking works in general but not with additional libraries

# like -lrt or -lz, you can force dynamic linking. This may for

# example be required on SunOS 5.9.

STATIC=" "

# Some directories.

# This works just like PREFIX, see above.

Line 212 WWWPREFIX="/var/www"

Line 285 WWWPREFIX="/var/www"

HTDOCDIR="${WWWPREFIX}/htdocs"

CGIBINDIR="${WWWPREFIX}/cgi-bin"

# --- settings that rarely need to be touched --------------------------

# --- user settings related to catman ----------------------------------

# Do not set these variables unless you really need to.

# By default, building mandocd(8) and catman(8) is disabled.

# To enable it, use the following line.

# It does not work on SunOS 5.10 because there is no mkdirat(2)

# nor on SunOS 5.9 which also lacks CMSG_LEN(3) and CMSG_SPACE(3).

# It may not work on old releases of Mac OS X either. For example,

# Mac OS X 10.4 Tiger provides neither mkdirat(2) nor openat(2).

# You can manually override the compiler to be used.

BUILD_CATMAN=1

# But that's rarely useful because ./configure asks your make(1)

# which compiler to use, and that answer will hardly be wrong.

CC=cc

# Install catman(8) with a different name.

# See BINM_MAN above for details of how this works.

# IBM AIX may need:

BINM_CATMAN=mcatman # default is "catman"

CC=xlc

# --- settings that rarely need to be touched --------------------------

# The default compiler flags are:

# Do not set these variables unless you really need to.

CFLAGS="-g -W -Wall -Wstrict-prototypes -Wno-unused-parameter -Wwrite-strings"

# Normally, leave CFLAGS unset. In that case, -g will automatically

# be used, and various -W options will be added if the compiler

# supports them. If you define CFLAGS manually, it will be used

# unchanged, and nothing will be added.

# IBM AIX xlc does not support -W; in that case, please use:

CFLAGS="-g"

# In rare cases, it may be required to skip individual automatic tests.

Line 239 CFLAGS="-g"

Line 317 CFLAGS="-g"

# and will be regarded as failed) or 1 (test will not be run and will

# be regarded as successful).

HAVE_ATTRIBUTE=0

HAVE_DIRENT_NAMLEN=0

HAVE_ENDIAN=0

HAVE_EFTYPE=0

Line 248 HAVE_FTS_COMPARE_CONST=0 # Setting this implies HAVE_

Line 327 HAVE_FTS_COMPARE_CONST=0 # Setting this implies HAVE_

HAVE_GETLINE=0

HAVE_GETSUBOPT=0

HAVE_ISBLANK=0

HAVE_LESS_T=0

HAVE_MKDTEMP=0

HAVE_NTOHL=0

HAVE_O_DIRECTORY=0

HAVE_OHASH=0

HAVE_PATH_MAX=0

HAVE_PLEDGE=0

HAVE_PROGNAME=0

HAVE_REALLOCARRAY=0

HAVE_RECALLOCARRAY=0

HAVE_REWB_BSD=0

HAVE_REWB_SYSV=0

HAVE_STRCASESTR=0

CVSweb