[BACK]Return to configure.local.example CVS log [TXT][DIR] Up to [cvsweb.bsd.lv] / mandoc

Diff for /mandoc/configure.local.example between version 1.4 and 1.27

version 1.4, 2015/01/23 21:59:31 version 1.27, 2017/02/16 15:19:01
Line 1 
Line 1 
 # $Id$  # $Id$
 #  #
 # Copyright (c) 2014, 2015 Ingo Schwarze <schwarze@openbsd.org>  # Copyright (c) 2014, 2015, 2016 Ingo Schwarze <schwarze@openbsd.org>
 #  #
 # Permission to use, copy, modify, and distribute this software for any  # Permission to use, copy, modify, and distribute this software for any
 # purpose with or without fee is hereby granted, provided that the above  # purpose with or without fee is hereby granted, provided that the above
Line 48  HAVE_WCHAR=1
Line 48  HAVE_WCHAR=1
   
 HAVE_WCHAR=0  HAVE_WCHAR=0
   
   # For -Tutf8 mode, mandoc needs to set an arbitrary locale having
   # a UTF-8 character set.  If autodetection of a suitable locale
   # fails or selects an undesirable locale, you can manually choose
   # the locale for -Tutf8 mode:
   
   UTF8_LOCALE=en_US.UTF-8
   
   # When man(1) or apropos(1) is called without -m and -M options,
   # MANPATH is not set in the environment, and man.conf(5) is not
   # available, manuals are searched for in the following directory
   # trees by default.
   
   MANPATH_DEFAULT="/usr/share/man:/usr/X11R6/man:/usr/local/man"
   
 # In manual pages written in the mdoc(7) language, the operating system  # In manual pages written in the mdoc(7) language, the operating system
 # version is displayed in the page footer line.  If an operating system  # version is displayed in the page footer line.  If an operating system
 # is specified as an argument to the .Os macro, that is always used.  # is specified as an argument to the .Os macro, that is always used.
Line 58  HAVE_WCHAR=0
Line 72  HAVE_WCHAR=0
 # If you do not want uname(3) to be called but instead want a fixed  # If you do not want uname(3) to be called but instead want a fixed
 # string to be used, use the following line:  # string to be used, use the following line:
   
 OSNAME="OpenBSD 5.6"  OSNAME="OpenBSD 6.0"
   
 # The following installation directories are used.  # The following installation directories are used.
 # It is possible to set only one or a few of these variables,  # It is possible to set only one or a few of these variables,
Line 69  OSNAME="OpenBSD 5.6"
Line 83  OSNAME="OpenBSD 5.6"
 PREFIX="/usr/local"  PREFIX="/usr/local"
 BINDIR="${PREFIX}/bin"  BINDIR="${PREFIX}/bin"
 SBINDIR="${PREFIX}/sbin"  SBINDIR="${PREFIX}/sbin"
 INCLUDEDIR="${PREFIX}/include/mandoc"  
 LIBDIR="${PREFIX}/lib/mandoc"  
 MANDIR="${PREFIX}/man"  MANDIR="${PREFIX}/man"
 EXAMPLEDIR="${PREFIX}/share/examples/mandoc"  
   
   # Some distributions may want to avoid naming conflicts
   # with the configuration files of other man(1) implementations.
   # This changes the name of the installed section 5 manual page as well.
   MANM_MANCONF="mandoc.conf"      # default is "man.conf"
   
 # Some distributions may want to avoid naming conflicts among manuals.  # Some distributions may want to avoid naming conflicts among manuals.
 # If you want to change the names of installed section 7 manual pages,  # If you want to change the names of installed section 7 manual pages,
 # the following alternative names are suggested.  # the following alternative names are suggested.
Line 87  MANM_ROFF="mandoc_roff"  # default is "roff"
Line 103  MANM_ROFF="mandoc_roff"  # default is "roff"
 MANM_EQN="mandoc_eqn"           # default is "eqn"  MANM_EQN="mandoc_eqn"           # default is "eqn"
 MANM_TBL="mandoc_tbl"           # default is "tbl"  MANM_TBL="mandoc_tbl"           # default is "tbl"
   
 # It is possible to change the utility program used for installation  # Some distributions may want to avoid naming conflicts with
 # and the modes files are installed with.  The defaults are:  # other man(1), apropos(1), makewhatis(8), or soelim(1) utilities.
   # If you want to change the names of binary programs,
   # the following alternative names are suggested.
   # Using different names is possible as well.
   # This changes the names of the installed section 1 and section 8
   # manual pages as well.
   # It is possible to set only one or two of these variables,
   # there is no need to copy the whole block.
   
 INSTALL="install"  BINM_MAN=mman                   # default is "man"
 INSTALL_PROGRAM="${INSTALL} -m 0555"  BINM_APROPOS=mapropos           # default is "apropos"
 INSTALL_LIB="${INSTALL} -m 0444"  BINM_WHATIS=mwhatis             # default is "whatis"
 INSTALL_MAN="${INSTALL} -m 0444"  BINM_MAKEWHATIS=mandocdb        # default is "makewhatis"
 INSTALL_DATA="${INSTALL} -m 0444"  BINM_SOELIM=msoelim             # default is "soelim"
   
 # --- user settings related to database support ------------------------  # Before falling back to the bundled version of the ohash(3) hashing
   # library, autoconfiguration tries the following linker flag to
   # link against your system version.  If you do have ohash(3) on
   # your system but it needs different linker flags, set the following
   # variable to specify the required linker flags.
   
 # By default, building makewhatis(8) and apropos(1) is enabled.  LD_OHASH="-lutil"
 # To disable it, for example to avoid the dependency on SQLite3,  
 # use the following line.  It that case, the remaining settings  
 # in this section are irrelevant.  
   
 BUILD_DB=0  
   
 # Two libraries are needed: SQLite3 and ohash(3).  
 # Autoconfiguration tries the following linker flags to find them.  
 # If none of these work, add a working DBLIB line to configure.local,  
 # disabling autodetection for library directories.  
   
 DBLIB="-lsqlite3"  
 DBLIB="-lsqlite3 -lutil"  
 DBLIB="-L/usr/local/lib -lsqlite3"  
   
 # When library autodetection decides to use -L/usr/local/lib,  # When library autodetection decides to use -L/usr/local/lib,
 # -I/usr/local/include is automatically added to CFLAGS.  # -I/usr/local/include is automatically added to CFLAGS.
 # If you manually set DBLIB to something including -L/usr/local/lib,  # If you manually set LD_OHASH to something including -L/usr/local/lib,
 # chances are you will also need the following line:  # chances are you will also need the following line:
   
 CFLAGS="${CFLAGS} -I/usr/local/include"  CFLAGS="${CFLAGS} -I/usr/local/include"
   
 # The man(1) utility needs to know where the manuals reside.  # Some platforms may need an additional linker flag for nanosleep(2).
 # We know of two ways to tell it: via manpath(1) or man.conf(5).  # If none is needed or it is -lrt, it is autodetected.
 # The latter is used by OpenBSD and NetBSD, the former by most  # Otherwise, set the following variable.
 # other systems.  
   
 # Force usage of manpath(1).  LD_NANOSLEEP="-lrt"
 # If it is not installed or not operational,  
 # makewhatis(8) and apropos(1) will not work properly.  
   
 HAVE_MANPATH=1  # Some platforms may need an additional linker flag for recvmsg(2).
   # If none is needed or it is -lsocket, it is autodetected.
   # Otherwise, set the following variable.
   
 # Force usage of man.conf(5).  LD_RECVMSG="-lsocket"
 # If it does not exist or contains no valid configuration,  
 # makewhatis(8) and apropos(1) will not work properly.  
   
 HAVE_MANPATH=0  # Some platforms might need additional linker flags to link against
   # libmandoc that are not autodetected, though no such cases are
   # currently known.
   
 # Some distributions may want to avoid naming conflicts  LDADD="-lm"
 # with groff, man-db, or other tools.  
 # If you want to change the names of binary programs,  
 # the following alternative names are suggested.  
 # Using other names is possible as well.  
 # This changes the names of the installed section 1 and section 8  
 # manual pages as well.  
 # It is possible to set only one or a few of these variables,  
 # there is no need to copy the whole block.  
   
 BINM_APROPOS=mapropos           # default is "apropos"  # Some systems may want to set additional linker flags for all the
 BINM_MAN=mman                   # default is "man"  # binaries, not only for those using libmandoc, for example for
 BINM_WHATIS=mwhatis             # default is "whatis"  # hardening options.
 BINM_MAKEWHATIS=mandocdb        # default is "makewhatis"  
   
   LDFLAGS="-Wl,-z,relro"
   
   # It is possible to change the utility program used for installation
   # and the modes files are installed with.  The defaults are:
   
   INSTALL="install"
   INSTALL_PROGRAM="${INSTALL} -m 0555"
   INSTALL_LIB="${INSTALL} -m 0444"
   INSTALL_MAN="${INSTALL} -m 0444"
   INSTALL_DATA="${INSTALL} -m 0444"
   
 # When using the "homebrew" package manager on Mac OS X, the actual  # When using the "homebrew" package manager on Mac OS X, the actual
 # manuals are located in a so-called "cellar" and only symlinked  # manuals are located in a so-called "cellar" and only symlinked
 # into the manual trees.  To allow mandoc to follow such symlinks,  # into the manual trees.  To allow mandoc to follow such symlinks,
Line 162  BINM_MAKEWHATIS=mandocdb # default is "makewhatis"
Line 176  BINM_MAKEWHATIS=mandocdb # default is "makewhatis"
 PREFIX="/usr/local"  PREFIX="/usr/local"
 HOMEBREWDIR="${PREFIX}/Cellar"  HOMEBREWDIR="${PREFIX}/Cellar"
   
 # --- user settings related man.cgi ------------------------------------  # --- user settings for the mandoc(3) library --------------------------
   
   # By default, libmandoc.a is not installed.  It is almost never needed
   # because there is almost no non-mandoc software out there using this
   # library.  The one notable exception is NetBSD apropos(1).
   # So, when building for the NetBSD base system - but not for NetBSD
   # ports nor for pkgsrc! - you may want the following:
   
   INSTALL_LIBMANDOC=1
   
   # The following settings are only used when INSTALL_LIBMANDOC is set.
   
   INCLUDEDIR="${PREFIX}/include/mandoc"
   LIBDIR="${PREFIX}/lib/mandoc"
   
   # --- user settings related to man.cgi ---------------------------------
   
 # By default, building man.cgi(8) is disabled.  To enable it, copy  # By default, building man.cgi(8) is disabled.  To enable it, copy
 # cgi.h.example to cgi.h, edit it, and use the following line.  # cgi.h.example to cgi.h, edit it, and use the following line.
 # Obviously, this requires that BUILD_DB is enabled, too.  
   
 BUILD_CGI=1  BUILD_CGI=1
   
Line 190  WWWPREFIX="/var/www"
Line 218  WWWPREFIX="/var/www"
 HTDOCDIR="${WWWPREFIX}/htdocs"  HTDOCDIR="${WWWPREFIX}/htdocs"
 CGIBINDIR="${WWWPREFIX}/cgi-bin"  CGIBINDIR="${WWWPREFIX}/cgi-bin"
   
   # --- user settings related to catman ----------------------------------
   
   # By default, building mandocd(8) and catman(8) is disabled.
   # To enable it, use the following line.
   # It does not work on SunOS 5.10 because there is no mkdirat(2)
   # nor on SunOS 5.9 which also lacks CMSG_LEN(3) and CMSG_SPACE(3).
   
   BUILD_CATMAN=1
   
   # Install catman(8) with a different name.
   # See BINM_MAN above for details of how this works.
   
   BINM_CATMAN=mcatman             # default is "catman"
   
 # --- settings that rarely need to be touched --------------------------  # --- settings that rarely need to be touched --------------------------
   
 # Do not set these variables unless you really need to.  # Do not set these variables unless you really need to.
Line 200  CGIBINDIR="${WWWPREFIX}/cgi-bin"
Line 242  CGIBINDIR="${WWWPREFIX}/cgi-bin"
   
 CC=cc  CC=cc
   
   # IBM AIX may need:
   
   CC=xlc
   
 # The default compiler flags are:  # The default compiler flags are:
   
 CFLAGS="-g -W -Wall -Wstrict-prototypes -Wno-unused-parameter -Wwrite-strings"  CFLAGS="-g -W -Wall -Wstrict-prototypes -Wno-unused-parameter -Wwrite-strings"
   
   # IBM AIX xlc does not support -W; in that case, please use:
   
   CFLAGS="-g"
   
 # In rare cases, it may be required to skip individual automatic tests.  # In rare cases, it may be required to skip individual automatic tests.
 # Each of the following variables can be set to 0 (test will not be run  # Each of the following variables can be set to 0 (test will not be run
 # and will be regarded as failed) or 1 (test will not be run and will  # and will be regarded as failed) or 1 (test will not be run and will
 # be regarded as successful).  # be regarded as successful).
   
 HAVE_DIRENT_NAMLEN=0  HAVE_DIRENT_NAMLEN=0
 HAVE_FGETLN=0  HAVE_ENDIAN=0
 HAVE_FTS=0  HAVE_EFTYPE=0
   HAVE_ERR=0
   HAVE_FTS=0  # Setting this implies HAVE_FTS_COMPARE_CONST=0.
   HAVE_FTS_COMPARE_CONST=0  # Setting this implies HAVE_FTS=1.
   HAVE_GETLINE=0
 HAVE_GETSUBOPT=0  HAVE_GETSUBOPT=0
 HAVE_MMAP=0  HAVE_ISBLANK=0
   HAVE_MKDTEMP=0
   HAVE_NTOHL=0
   HAVE_OHASH=0
   HAVE_PATH_MAX=0
   HAVE_PLEDGE=0
   HAVE_PROGNAME=0
 HAVE_REALLOCARRAY=0  HAVE_REALLOCARRAY=0
   HAVE_REWB_BSD=0
   HAVE_REWB_SYSV=0
 HAVE_STRCASESTR=0  HAVE_STRCASESTR=0
   HAVE_STRINGLIST=0
 HAVE_STRLCAT=0  HAVE_STRLCAT=0
 HAVE_STRLCPY=0  HAVE_STRLCPY=0
 HAVE_STRPTIME=0  HAVE_STRPTIME=0
 HAVE_STRSEP=0  HAVE_STRSEP=0
   HAVE_STRTONUM=0
 HAVE_SQLITE3=0  HAVE_SYS_ENDIAN=0
 HAVE_SQLITE3_ERRSTR=0  HAVE_VASPRINTF=0
 HAVE_OHASH=0  HAVE_WCHAR=0
Legend:
Removed from v.1.4  
changed lines
  Added in v.1.27
CVSweb