mandoc/configure.local.example - diff

Return to configure.local.example CVS log

Up to [cvsweb.bsd.lv] / mandoc

Diff for /mandoc/configure.local.example between version 1.14.2.9 and 1.34

version 1.14.2.9, 2017/03/04 16:44:43

version 1.34, 2018/07/31 15:34:00

Line 1

# $Id$

# Permission to use, copy, modify, and distribute this software for any

# purpose with or without fee is hereby granted, provided that the above

Line 20

# and put any of these settings into it if ./configure autodetection

# fails or if you want to make different choices for other reasons.

# If autodetection fails, please tell <tech@mdocml.bsd.lv>.

# If autodetection fails, please tell <tech@mandoc.bsd.lv>.

# We recommend that you write ./configure.local from scratch and

# only put the lines there you need. This file contains examples.

Line 56 HAVE_WCHAR=0

UTF8_LOCALE=en_US.UTF-8

# When man(1) or apropos(1) is called without -m and -M options,

# MANPATH is not set in the environment, man.conf(5) is not available

# MANPATH is not set in the environment, and man.conf(5) is not

# and manpath(1) not used, manuals are searched for in the following

# available, manuals are searched for in the following directory

# directory trees by default.

# trees by default.

MANPATH_DEFAULT="/usr/share/man:/usr/X11R6/man:/usr/local/man"

# Validation of cross references with mandoc -Tlint only looks

# for manual pages in the following directories:

MANPATH_BASE="/usr/share/man:/usr/X11R6/man"

# In manual pages written in the mdoc(7) language, the operating system

# version is displayed in the page footer line. If an operating system

# is specified as an argument to the .Os macro, that is always used.

Line 72 MANPATH_DEFAULT="/usr/share/man:/usr/X11R6/man:/usr/lo

Line 77 MANPATH_DEFAULT="/usr/share/man:/usr/X11R6/man:/usr/lo

# If you do not want uname(3) to be called but instead want a fixed

# string to be used, use the following line:

OSNAME="OpenBSD 6.0"

OSNAME="OpenBSD 6.3"

# The following installation directories are used.

# It is possible to set only one or a few of these variables,

Line 83 OSNAME="OpenBSD 6.0"

Line 88 OSNAME="OpenBSD 6.0"

PREFIX="/usr/local"

BINDIR="${PREFIX}/bin"

SBINDIR="${PREFIX}/sbin"

INCLUDEDIR="${PREFIX}/include/mandoc"

LIBDIR="${PREFIX}/lib/mandoc"

MANDIR="${PREFIX}/man"

# If BINDIR and SBINDIR are not subdirectories of the same parent

Line 94 MANDIR="${PREFIX}/man"

Line 97 MANDIR="${PREFIX}/man"

BIN_FROM_SBIN="../bin"

# The man(1) utility needs to know where the manuals reside.

# We know of two ways to tell it: via manpath(1) or man.conf(5).

# The latter is used by OpenBSD and NetBSD, the former by most

# other systems.

# Force usage of manpath(1).

# If it is not installed or not operational,

# man(1), makewhatis(8), and apropos(1) will not work properly.

HAVE_MANPATH=1

# Force usage of man.conf(5).

HAVE_MANPATH=0

# Some distributions may want to avoid naming conflicts

# with the configuration files of other man(1) implementations.

# This changes the name of the installed section 5 manual page as well.

MANM_MANCONF="mandoc.conf" # default is "man.conf"

# Some distributions may want to avoid naming conflicts among manuals.

Line 125 MANM_ROFF="mandoc_roff" # default is "roff"

Line 116 MANM_ROFF="mandoc_roff" # default is "roff"

MANM_EQN="mandoc_eqn" # default is "eqn"

MANM_TBL="mandoc_tbl" # default is "tbl"

# Some distributions may want to avoid naming conflicts

# Some distributions may want to avoid naming conflicts with

# with other man(1) and soelim(1) utilities.

# other man(1), apropos(1), makewhatis(8), or soelim(1) utilities.

# If you want to change the names of binary programs,

# the following alternative names are suggested.

# Using different names is possible as well.

# This changes the names of the installed section 1 manual pages as well.

# This changes the names of the installed section 1 and section 8

# manual pages as well.

# It is possible to set only one or two of these variables,

# there is no need to copy the whole block.

BINM_MAN=mman # default is "man"

BINM_APROPOS=mapropos # default is "apropos"

BINM_WHATIS=mwhatis # default is "whatis"

BINM_MAKEWHATIS=mandocdb # default is "makewhatis"

BINM_SOELIM=msoelim # default is "soelim"

# Some distributions do not want hardlinks

Line 158 LD_OHASH="-lutil"

Line 155 LD_OHASH="-lutil"

LD_NANOSLEEP="-lrt"

# Some platforms may need an additional linker flag for recvmsg(2).

# If none is needed or it is -lsocket, it is autodetected.

# Otherwise, set the following variable.

LD_RECVMSG="-lsocket"

# Some platforms might need additional linker flags to link against

# libmandoc that are not autodetected, though no such cases are

# currently known.

Line 179 INSTALL_LIB="${INSTALL} -m 0444"

Line 182 INSTALL_LIB="${INSTALL} -m 0444"

INSTALL_MAN="${INSTALL} -m 0444"

INSTALL_DATA="${INSTALL} -m 0444"

# --- user settings related to database support ------------------------

# Autoconfiguration tries the following linker flags to find the

# SQLite3 library installed on your system. If none of these work,

# set the following variable to specify the required linker flags.

LD_SQLITE3="-lsqlite3"

LD_SQLITE3="-L/usr/local/lib -lsqlite3"

# When library autodetection decides to use -L/usr/local/lib,

# -I/usr/local/include is automatically added to CFLAGS.

# If you manually set LD_SQLITE3 to something including -L/usr/local/lib,

# chances are you will also need the following line:

CFLAGS="${CFLAGS} -I/usr/local/include"

# Some distributions may want to avoid naming conflicts

# with another implementation of apropos(1) and makewhatis(8).

# If you want to change the names of the binary programs,

# the following alternative names are suggested.

# Using other names is possible as well.

# This changes the names of the installed section 1 and section 8

# manual pages as well.

# It is possible to set only one or two of these variables,

# there is no need to copy the whole block.

BINM_APROPOS=mapropos # default is "apropos"

BINM_WHATIS=mwhatis # default is "whatis"

BINM_MAKEWHATIS=mandocdb # default is "makewhatis"

# When using the "homebrew" package manager on Mac OS X, the actual

# manuals are located in a so-called "cellar" and only symlinked

# into the manual trees. To allow mandoc to follow such symlinks,

Line 218 BINM_MAKEWHATIS=mandocdb # default is "makewhatis"

Line 191 BINM_MAKEWHATIS=mandocdb # default is "makewhatis"

PREFIX="/usr/local"

HOMEBREWDIR="${PREFIX}/Cellar"

# --- user settings for the mandoc(3) library --------------------------

# By default, libmandoc.a is not installed. It is almost never needed

# because there is almost no non-mandoc software out there using this

# library. The one notable exception is NetBSD apropos(1).

# So, when building for the NetBSD base system - but not for NetBSD

# ports nor for pkgsrc! - you may want the following:

INSTALL_LIBMANDOC=1

# The following settings are only used when INSTALL_LIBMANDOC is set.

INCLUDEDIR="${PREFIX}/include/mandoc"

LIBDIR="${PREFIX}/lib/mandoc"

# --- user settings related to man.cgi ---------------------------------

# By default, building man.cgi(8) is disabled. To enable it, copy

Line 228 BUILD_CGI=1

Line 216 BUILD_CGI=1

# The remaining settings in this section are only relevant if BUILD_CGI

# is enabled. Otherwise, they have no effect either way.

# By default, man.cgi(8) is linked statically.

# By default, man.cgi(8) is linked statically if the compiler supports

# Some systems do not support static linking, for example Mac OS X.

# the -static option. If automatic detection fails, you can force

# In that case, use the following line:

# static linking of man.cgi(8).

STATIC=

STATIC="-static"

# Some systems, for example Linux, require -pthread for static linking:

# Some systems may require -pthread for static linking:

STATIC="-static -pthread"

# If static linking works in general but not with additional libraries

# like -lrt or -lz, you can force dynamic linking. This may for

# example be required on SunOS 5.9.

STATIC=" "

# Some directories.

# This works just like PREFIX, see above.

Line 245 WWWPREFIX="/var/www"

Line 239 WWWPREFIX="/var/www"

HTDOCDIR="${WWWPREFIX}/htdocs"

CGIBINDIR="${WWWPREFIX}/cgi-bin"

# --- user settings related to catman ----------------------------------

# By default, building mandocd(8) and catman(8) is disabled.

# To enable it, use the following line.

# It does not work on SunOS 5.10 because there is no mkdirat(2)

# nor on SunOS 5.9 which also lacks CMSG_LEN(3) and CMSG_SPACE(3).

BUILD_CATMAN=1

# Install catman(8) with a different name.

# See BINM_MAN above for details of how this works.

BINM_CATMAN=mcatman # default is "catman"

# --- settings that rarely need to be touched --------------------------

# Do not set these variables unless you really need to.

Line 255 CGIBINDIR="${WWWPREFIX}/cgi-bin"

Line 263 CGIBINDIR="${WWWPREFIX}/cgi-bin"

CC=cc

# Because the system compiler may not provide <stdint.h>,

# SunOS 5.9 may need:

CC=gcc

# IBM AIX may need:

CC=xlc

# The default compiler flags are:

# Normally, leave CFLAGS unset. In that case, -g will automatically

# be used, and various -W options will be added if the compiler

# supports them. If you define CFLAGS manually, it will be used

# unchanged, and nothing will be added.

CFLAGS="-g -W -Wall -Wstrict-prototypes -Wno-unused-parameter -Wwrite-strings"

# IBM AIX xlc does not support -W; in that case, please use:

CFLAGS="-g"

# In rare cases, it may be required to skip individual automatic tests.

Line 273 CFLAGS="-g"

Line 285 CFLAGS="-g"

# be regarded as successful).

HAVE_DIRENT_NAMLEN=0

HAVE_ENDIAN=0

HAVE_EFTYPE=0

HAVE_ERR=0

HAVE_FTS=0 # Setting this implies HAVE_FTS_COMPARE_CONST=0.

Line 281 HAVE_GETLINE=0

Line 294 HAVE_GETLINE=0

HAVE_GETSUBOPT=0

HAVE_ISBLANK=0

HAVE_MKDTEMP=0

HAVE_MMAP=0

HAVE_NTOHL=0

HAVE_O_DIRECTORY=0

HAVE_OHASH=0

HAVE_PATH_MAX=0

HAVE_PLEDGE=0

HAVE_PROGNAME=0

HAVE_REALLOCARRAY=0

HAVE_RECALLOCARRAY=0

HAVE_REWB_BSD=0

HAVE_REWB_SYSV=0

HAVE_STRCASESTR=0

Line 295 HAVE_STRLCPY=0

Line 311 HAVE_STRLCPY=0

HAVE_STRPTIME=0

HAVE_STRSEP=0

HAVE_STRTONUM=0

HAVE_SYS_ENDIAN=0

HAVE_VASPRINTF=0

HAVE_WCHAR=0

HAVE_SQLITE3_ERRSTR=0

HAVE_OHASH=0

CVSweb