[BACK]Return to configure.local.example CVS log [TXT][DIR] Up to [cvsweb.bsd.lv] / mandoc

Annotation of mandoc/configure.local.example, Revision 1.31

1.31    ! schwarze    1: # $Id: configure.local.example,v 1.30 2017/03/04 16:36:29 schwarze Exp $
1.1       schwarze    2: #
1.28      schwarze    3: # Copyright (c) 2014, 2015, 2016, 2017 Ingo Schwarze <schwarze@openbsd.org>
1.1       schwarze    4: #
                      5: # Permission to use, copy, modify, and distribute this software for any
                      6: # purpose with or without fee is hereby granted, provided that the above
                      7: # copyright notice and this permission notice appear in all copies.
                      8: #
                      9: # THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
                     10: # WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
                     11: # MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
                     12: # ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
                     13: # WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
                     14: # ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
                     15: # OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
                     16:
                     17: # For all settings documented in this file, there are reasonable
                     18: # defaults and/or the ./configure script attempts autodetection.
                     19: # Consequently, you only need to create a file ./configure.local
                     20: # and put any of these settings into it if ./configure autodetection
                     21: # fails or if you want to make different choices for other reasons.
                     22:
                     23: # If autodetection fails, please tell <tech@mdocml.bsd.lv>.
                     24:
                     25: # We recommend that you write ./configure.local from scratch and
                     26: # only put the lines there you need.  This file contains examples.
                     27: # It is not intended as a template to be copied as a whole.
                     28:
                     29: # --- user settings relevant for all builds ----------------------------
                     30:
                     31: # For -Tutf8 and -Tlocale operation, mandoc(1) requires <locale.h>
                     32: # providing setlocale(3) and <wchar.h> providing wcwidth(3) and
                     33: # putwchar(3) with a wchar_t storing UCS-4 values.  Theoretically,
                     34: # the latter should be tested with the __STDC_ISO_10646__ feature
                     35: # macro.  In practice, many <wchar.h> headers do not provide that
                     36: # macro even though they treat wchar_t as UCS-4.  So the automatic
                     37: # test only checks that wchar_t is wide enough, that is, at least
                     38: # four bytes.
                     39:
                     40: # The following line forces multi-byte support.
                     41: # If your C library does not treat wchar_t as UCS-4, the UTF-8 output
                     42: # mode will print garbage.
                     43:
                     44: HAVE_WCHAR=1
                     45:
                     46: # The following line disables multi-byte support.
                     47: # The output modes -Tutf8 and -Tlocale will be the same as -Tascii.
                     48:
                     49: HAVE_WCHAR=0
1.18      schwarze   50:
                     51: # For -Tutf8 mode, mandoc needs to set an arbitrary locale having
                     52: # a UTF-8 character set.  If autodetection of a suitable locale
                     53: # fails or selects an undesirable locale, you can manually choose
                     54: # the locale for -Tutf8 mode:
                     55:
                     56: UTF8_LOCALE=en_US.UTF-8
1.7       schwarze   57:
                     58: # When man(1) or apropos(1) is called without -m and -M options,
1.16      schwarze   59: # MANPATH is not set in the environment, and man.conf(5) is not
                     60: # available, manuals are searched for in the following directory
                     61: # trees by default.
1.7       schwarze   62:
                     63: MANPATH_DEFAULT="/usr/share/man:/usr/X11R6/man:/usr/local/man"
1.1       schwarze   64:
                     65: # In manual pages written in the mdoc(7) language, the operating system
                     66: # version is displayed in the page footer line.  If an operating system
                     67: # is specified as an argument to the .Os macro, that is always used.
                     68: # If the .Os macro has no argument and an operation system is specified
                     69: # with the mandoc(1) -Ios= command line option, that is used.
                     70: # Otherwise, the uname(3) library function is called at runtime to find
                     71: # the name of the operating system.
                     72: # If you do not want uname(3) to be called but instead want a fixed
                     73: # string to be used, use the following line:
                     74:
1.15      schwarze   75: OSNAME="OpenBSD 6.0"
1.1       schwarze   76:
                     77: # The following installation directories are used.
                     78: # It is possible to set only one or a few of these variables,
                     79: # there is no need to copy the whole block.
                     80: # Even if you set PREFIX to something else, the other variables
                     81: # pick it up without copying them all over.
                     82:
                     83: PREFIX="/usr/local"
                     84: BINDIR="${PREFIX}/bin"
                     85: SBINDIR="${PREFIX}/sbin"
                     86: MANDIR="${PREFIX}/man"
1.30      schwarze   87:
                     88: # If BINDIR and SBINDIR are not subdirectories of the same parent
                     89: # directory or if the basename(1) of BINDIR differs from "bin",
                     90: # the relative path from SBINDIR to BINDIR is also needed.
                     91: # The default is:
                     92:
                     93: BIN_FROM_SBIN="../bin"
1.8       schwarze   94:
                     95: # Some distributions may want to avoid naming conflicts
                     96: # with the configuration files of other man(1) implementations.
                     97: # This changes the name of the installed section 5 manual page as well.
                     98: MANM_MANCONF="mandoc.conf"     # default is "man.conf"
1.5       schwarze   99:
1.2       schwarze  100: # Some distributions may want to avoid naming conflicts among manuals.
                    101: # If you want to change the names of installed section 7 manual pages,
                    102: # the following alternative names are suggested.
                    103: # The suffix ".7" will automatically be appended.
                    104: # It is possible to set only one or a few of these variables,
                    105: # there is no need to copy the whole block.
                    106:
1.27      schwarze  107: MANM_MAN="mandoc_man"          # default is "man"
1.2       schwarze  108: MANM_MDOC="mandoc_mdoc"                # default is "mdoc"
                    109: MANM_ROFF="mandoc_roff"                # default is "roff"
                    110: MANM_EQN="mandoc_eqn"          # default is "eqn"
                    111: MANM_TBL="mandoc_tbl"          # default is "tbl"
                    112:
1.15      schwarze  113: # Some distributions may want to avoid naming conflicts with
                    114: # other man(1), apropos(1), makewhatis(8), or soelim(1) utilities.
1.9       schwarze  115: # If you want to change the names of binary programs,
                    116: # the following alternative names are suggested.
                    117: # Using different names is possible as well.
1.15      schwarze  118: # This changes the names of the installed section 1 and section 8
                    119: # manual pages as well.
                    120: # It is possible to set only one or two of these variables,
                    121: # there is no need to copy the whole block.
1.5       schwarze  122:
                    123: BINM_MAN=mman                  # default is "man"
1.15      schwarze  124: BINM_APROPOS=mapropos          # default is "apropos"
                    125: BINM_WHATIS=mwhatis            # default is "whatis"
                    126: BINM_MAKEWHATIS=mandocdb       # default is "makewhatis"
1.9       schwarze  127: BINM_SOELIM=msoelim            # default is "soelim"
1.28      schwarze  128:
                    129: # Some distributions do not want hardlinks
                    130: # between installed binary programs.
                    131: # Set the following variable to use symbolic links instead.
                    132: # It is also used for links between manual pages.
                    133: # It is only used by the install* targets.
                    134: # When using this, DESTDIR must be empty or an absolute path.
                    135:
                    136: LN="ln -sf"                    # default is "ln -f"
1.5       schwarze  137:
1.11      schwarze  138: # Before falling back to the bundled version of the ohash(3) hashing
                    139: # library, autoconfiguration tries the following linker flag to
                    140: # link against your system version.  If you do have ohash(3) on
                    141: # your system but it needs different linker flags, set the following
                    142: # variable to specify the required linker flags.
                    143:
                    144: LD_OHASH="-lutil"
                    145:
1.15      schwarze  146: # When library autodetection decides to use -L/usr/local/lib,
                    147: # -I/usr/local/include is automatically added to CFLAGS.
                    148: # If you manually set LD_OHASH to something including -L/usr/local/lib,
                    149: # chances are you will also need the following line:
                    150:
                    151: CFLAGS="${CFLAGS} -I/usr/local/include"
                    152:
1.17      schwarze  153: # Some platforms may need an additional linker flag for nanosleep(2).
                    154: # If none is needed or it is -lrt, it is autodetected.
                    155: # Otherwise, set the following variable.
1.11      schwarze  156:
1.17      schwarze  157: LD_NANOSLEEP="-lrt"
1.24      schwarze  158:
                    159: # Some platforms may need an additional linker flag for recvmsg(2).
                    160: # If none is needed or it is -lsocket, it is autodetected.
                    161: # Otherwise, set the following variable.
                    162:
                    163: LD_RECVMSG="-lsocket"
1.17      schwarze  164:
                    165: # Some platforms might need additional linker flags to link against
                    166: # libmandoc that are not autodetected, though no such cases are
                    167: # currently known.
                    168:
                    169: LDADD="-lm"
1.12      schwarze  170:
                    171: # Some systems may want to set additional linker flags for all the
                    172: # binaries, not only for those using libmandoc, for example for
                    173: # hardening options.
                    174:
                    175: LDFLAGS="-Wl,-z,relro"
1.11      schwarze  176:
1.1       schwarze  177: # It is possible to change the utility program used for installation
                    178: # and the modes files are installed with.  The defaults are:
                    179:
                    180: INSTALL="install"
                    181: INSTALL_PROGRAM="${INSTALL} -m 0555"
                    182: INSTALL_LIB="${INSTALL} -m 0444"
                    183: INSTALL_MAN="${INSTALL} -m 0444"
                    184: INSTALL_DATA="${INSTALL} -m 0444"
                    185:
1.3       schwarze  186: # When using the "homebrew" package manager on Mac OS X, the actual
                    187: # manuals are located in a so-called "cellar" and only symlinked
                    188: # into the manual trees.  To allow mandoc to follow such symlinks,
                    189: # you have to specify the physical location of the cellar as returned
                    190: # by realpath(3), for example:
                    191:
1.4       schwarze  192: PREFIX="/usr/local"
                    193: HOMEBREWDIR="${PREFIX}/Cellar"
1.22      schwarze  194:
                    195: # --- user settings for the mandoc(3) library --------------------------
                    196:
                    197: # By default, libmandoc.a is not installed.  It is almost never needed
                    198: # because there is almost no non-mandoc software out there using this
                    199: # library.  The one notable exception is NetBSD apropos(1).
                    200: # So, when building for the NetBSD base system - but not for NetBSD
                    201: # ports nor for pkgsrc! - you may want the following:
                    202:
                    203: INSTALL_LIBMANDOC=1
                    204:
                    205: # The following settings are only used when INSTALL_LIBMANDOC is set.
                    206:
                    207: INCLUDEDIR="${PREFIX}/include/mandoc"
                    208: LIBDIR="${PREFIX}/lib/mandoc"
1.1       schwarze  209:
1.14      schwarze  210: # --- user settings related to man.cgi ---------------------------------
1.1       schwarze  211:
                    212: # By default, building man.cgi(8) is disabled.  To enable it, copy
                    213: # cgi.h.example to cgi.h, edit it, and use the following line.
                    214:
                    215: BUILD_CGI=1
                    216:
                    217: # The remaining settings in this section are only relevant if BUILD_CGI
                    218: # is enabled.  Otherwise, they have no effect either way.
                    219:
                    220: # By default, man.cgi(8) is linked statically.
                    221: # Some systems do not support static linking, for example Mac OS X.
                    222: # In that case, use the following line:
                    223:
                    224: STATIC=
                    225:
                    226: # Some systems, for example Linux, require -pthread for static linking:
                    227:
                    228: STATIC="-static -pthread"
                    229:
                    230: # Some directories.
                    231: # This works just like PREFIX, see above.
                    232:
                    233: WWWPREFIX="/var/www"
                    234: HTDOCDIR="${WWWPREFIX}/htdocs"
                    235: CGIBINDIR="${WWWPREFIX}/cgi-bin"
1.23      schwarze  236:
                    237: # --- user settings related to catman ----------------------------------
                    238:
                    239: # By default, building mandocd(8) and catman(8) is disabled.
                    240: # To enable it, use the following line.
1.25      schwarze  241: # It does not work on SunOS 5.10 because there is no mkdirat(2)
                    242: # nor on SunOS 5.9 which also lacks CMSG_LEN(3) and CMSG_SPACE(3).
1.23      schwarze  243:
                    244: BUILD_CATMAN=1
1.26      schwarze  245:
                    246: # Install catman(8) with a different name.
                    247: # See BINM_MAN above for details of how this works.
                    248:
1.27      schwarze  249: BINM_CATMAN=mcatman            # default is "catman"
1.1       schwarze  250:
                    251: # --- settings that rarely need to be touched --------------------------
                    252:
                    253: # Do not set these variables unless you really need to.
                    254:
                    255: # You can manually override the compiler to be used.
                    256: # But that's rarely useful because ./configure asks your make(1)
                    257: # which compiler to use, and that answer will hardly be wrong.
                    258:
                    259: CC=cc
                    260:
1.13      schwarze  261: # IBM AIX may need:
                    262:
                    263: CC=xlc
                    264:
1.1       schwarze  265: # The default compiler flags are:
                    266:
                    267: CFLAGS="-g -W -Wall -Wstrict-prototypes -Wno-unused-parameter -Wwrite-strings"
1.13      schwarze  268:
                    269: # IBM AIX xlc does not support -W; in that case, please use:
                    270:
                    271: CFLAGS="-g"
1.1       schwarze  272:
                    273: # In rare cases, it may be required to skip individual automatic tests.
                    274: # Each of the following variables can be set to 0 (test will not be run
                    275: # and will be regarded as failed) or 1 (test will not be run and will
                    276: # be regarded as successful).
                    277:
                    278: HAVE_DIRENT_NAMLEN=0
1.20      schwarze  279: HAVE_ENDIAN=0
1.19      schwarze  280: HAVE_EFTYPE=0
1.11      schwarze  281: HAVE_ERR=0
1.21      schwarze  282: HAVE_FTS=0  # Setting this implies HAVE_FTS_COMPARE_CONST=0.
                    283: HAVE_FTS_COMPARE_CONST=0  # Setting this implies HAVE_FTS=1.
1.11      schwarze  284: HAVE_GETLINE=0
1.1       schwarze  285: HAVE_GETSUBOPT=0
1.11      schwarze  286: HAVE_ISBLANK=0
                    287: HAVE_MKDTEMP=0
1.20      schwarze  288: HAVE_NTOHL=0
1.29      schwarze  289: HAVE_O_DIRECTORY=0
1.15      schwarze  290: HAVE_OHASH=0
1.19      schwarze  291: HAVE_PATH_MAX=0
1.11      schwarze  292: HAVE_PLEDGE=0
                    293: HAVE_PROGNAME=0
1.1       schwarze  294: HAVE_REALLOCARRAY=0
1.31    ! schwarze  295: HAVE_RECALLOCARRAY=0
1.11      schwarze  296: HAVE_REWB_BSD=0
                    297: HAVE_REWB_SYSV=0
1.1       schwarze  298: HAVE_STRCASESTR=0
1.11      schwarze  299: HAVE_STRINGLIST=0
1.1       schwarze  300: HAVE_STRLCAT=0
                    301: HAVE_STRLCPY=0
                    302: HAVE_STRPTIME=0
                    303: HAVE_STRSEP=0
1.6       schwarze  304: HAVE_STRTONUM=0
1.20      schwarze  305: HAVE_SYS_ENDIAN=0
1.11      schwarze  306: HAVE_VASPRINTF=0
                    307: HAVE_WCHAR=0

CVSweb