Annotation of mandoc/configure.local.example, Revision 1.37
1.37 ! schwarze 1: # $Id: configure.local.example,v 1.36 2019/03/06 10:18:58 schwarze Exp $
1.1 schwarze 2: #
1.35 schwarze 3: # Copyright (c) 2014-2019 Ingo Schwarze <schwarze@openbsd.org>
1.1 schwarze 4: #
5: # Permission to use, copy, modify, and distribute this software for any
6: # purpose with or without fee is hereby granted, provided that the above
7: # copyright notice and this permission notice appear in all copies.
8: #
9: # THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
10: # WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
11: # MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
12: # ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
13: # WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
14: # ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
15: # OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
16:
17: # For all settings documented in this file, there are reasonable
18: # defaults and/or the ./configure script attempts autodetection.
19: # Consequently, you only need to create a file ./configure.local
20: # and put any of these settings into it if ./configure autodetection
21: # fails or if you want to make different choices for other reasons.
22:
1.33 schwarze 23: # If autodetection fails, please tell <tech@mandoc.bsd.lv>.
1.1 schwarze 24:
25: # We recommend that you write ./configure.local from scratch and
26: # only put the lines there you need. This file contains examples.
27: # It is not intended as a template to be copied as a whole.
28:
29: # --- user settings relevant for all builds ----------------------------
30:
1.37 ! schwarze 31: # By default, "cc" is used as the C compiler, but it can be overridden.
! 32: # For example, the system compiler in SunOS 5.9 may not provide <stdint.h>,
! 33: # which may require this line:
! 34: CC=gcc
! 35:
! 36: # IBM AIX may need:
! 37: CC=xlc
! 38:
1.1 schwarze 39: # For -Tutf8 and -Tlocale operation, mandoc(1) requires <locale.h>
40: # providing setlocale(3) and <wchar.h> providing wcwidth(3) and
41: # putwchar(3) with a wchar_t storing UCS-4 values. Theoretically,
42: # the latter should be tested with the __STDC_ISO_10646__ feature
43: # macro. In practice, many <wchar.h> headers do not provide that
44: # macro even though they treat wchar_t as UCS-4. So the automatic
45: # test only checks that wchar_t is wide enough, that is, at least
46: # four bytes.
47:
48: # The following line forces multi-byte support.
49: # If your C library does not treat wchar_t as UCS-4, the UTF-8 output
50: # mode will print garbage.
51:
52: HAVE_WCHAR=1
53:
54: # The following line disables multi-byte support.
55: # The output modes -Tutf8 and -Tlocale will be the same as -Tascii.
56:
57: HAVE_WCHAR=0
1.18 schwarze 58:
59: # For -Tutf8 mode, mandoc needs to set an arbitrary locale having
60: # a UTF-8 character set. If autodetection of a suitable locale
61: # fails or selects an undesirable locale, you can manually choose
62: # the locale for -Tutf8 mode:
63:
64: UTF8_LOCALE=en_US.UTF-8
1.7 schwarze 65:
66: # When man(1) or apropos(1) is called without -m and -M options,
1.16 schwarze 67: # MANPATH is not set in the environment, and man.conf(5) is not
68: # available, manuals are searched for in the following directory
69: # trees by default.
1.7 schwarze 70:
71: MANPATH_DEFAULT="/usr/share/man:/usr/X11R6/man:/usr/local/man"
1.32 schwarze 72:
73: # Validation of cross references with mandoc -Tlint only looks
74: # for manual pages in the following directories:
75:
76: MANPATH_BASE="/usr/share/man:/usr/X11R6/man"
1.1 schwarze 77:
1.35 schwarze 78: # When man(1) is called with the -S option and no manual page is
79: # found matching the requested name and the requested architecture,
80: # it tries to figure out whether the requested architecture is valid
81: # for the present operating system. Normally, ./configure detects
82: # the operating system using uname(1). If that fails or is not
83: # desired, either of the following lines can be used:
84:
85: OSENUM=MANDOC_OS_NETBSD
86: OSENUM=MANDOC_OS_OPENBSD
87: OSENUM=MANDOC_OS_OTHER
88:
1.1 schwarze 89: # In manual pages written in the mdoc(7) language, the operating system
90: # version is displayed in the page footer line. If an operating system
91: # is specified as an argument to the .Os macro, that is always used.
92: # If the .Os macro has no argument and an operation system is specified
93: # with the mandoc(1) -Ios= command line option, that is used.
94: # Otherwise, the uname(3) library function is called at runtime to find
95: # the name of the operating system.
96: # If you do not want uname(3) to be called but instead want a fixed
97: # string to be used, use the following line:
98:
1.35 schwarze 99: OSNAME="OpenBSD 6.5"
1.1 schwarze 100:
101: # The following installation directories are used.
102: # It is possible to set only one or a few of these variables,
103: # there is no need to copy the whole block.
104: # Even if you set PREFIX to something else, the other variables
105: # pick it up without copying them all over.
106:
107: PREFIX="/usr/local"
108: BINDIR="${PREFIX}/bin"
109: SBINDIR="${PREFIX}/sbin"
110: MANDIR="${PREFIX}/man"
1.30 schwarze 111:
112: # If BINDIR and SBINDIR are not subdirectories of the same parent
113: # directory or if the basename(1) of BINDIR differs from "bin",
114: # the relative path from SBINDIR to BINDIR is also needed.
115: # The default is:
116:
117: BIN_FROM_SBIN="../bin"
1.8 schwarze 118:
119: # Some distributions may want to avoid naming conflicts
120: # with the configuration files of other man(1) implementations.
121: # This changes the name of the installed section 5 manual page as well.
1.34 schwarze 122:
1.8 schwarze 123: MANM_MANCONF="mandoc.conf" # default is "man.conf"
1.5 schwarze 124:
1.2 schwarze 125: # Some distributions may want to avoid naming conflicts among manuals.
126: # If you want to change the names of installed section 7 manual pages,
127: # the following alternative names are suggested.
128: # The suffix ".7" will automatically be appended.
129: # It is possible to set only one or a few of these variables,
130: # there is no need to copy the whole block.
131:
1.27 schwarze 132: MANM_MAN="mandoc_man" # default is "man"
1.2 schwarze 133: MANM_MDOC="mandoc_mdoc" # default is "mdoc"
134: MANM_ROFF="mandoc_roff" # default is "roff"
135: MANM_EQN="mandoc_eqn" # default is "eqn"
136: MANM_TBL="mandoc_tbl" # default is "tbl"
137:
1.15 schwarze 138: # Some distributions may want to avoid naming conflicts with
139: # other man(1), apropos(1), makewhatis(8), or soelim(1) utilities.
1.9 schwarze 140: # If you want to change the names of binary programs,
141: # the following alternative names are suggested.
142: # Using different names is possible as well.
1.15 schwarze 143: # This changes the names of the installed section 1 and section 8
144: # manual pages as well.
145: # It is possible to set only one or two of these variables,
146: # there is no need to copy the whole block.
1.5 schwarze 147:
148: BINM_MAN=mman # default is "man"
1.15 schwarze 149: BINM_APROPOS=mapropos # default is "apropos"
150: BINM_WHATIS=mwhatis # default is "whatis"
151: BINM_MAKEWHATIS=mandocdb # default is "makewhatis"
1.9 schwarze 152: BINM_SOELIM=msoelim # default is "soelim"
1.28 schwarze 153:
154: # Some distributions do not want hardlinks
155: # between installed binary programs.
156: # Set the following variable to use symbolic links instead.
157: # It is also used for links between manual pages.
158: # It is only used by the install* targets.
159: # When using this, DESTDIR must be empty or an absolute path.
160:
161: LN="ln -sf" # default is "ln -f"
1.5 schwarze 162:
1.11 schwarze 163: # Before falling back to the bundled version of the ohash(3) hashing
164: # library, autoconfiguration tries the following linker flag to
165: # link against your system version. If you do have ohash(3) on
166: # your system but it needs different linker flags, set the following
167: # variable to specify the required linker flags.
168:
169: LD_OHASH="-lutil"
170:
1.17 schwarze 171: # Some platforms may need an additional linker flag for nanosleep(2).
172: # If none is needed or it is -lrt, it is autodetected.
173: # Otherwise, set the following variable.
1.11 schwarze 174:
1.17 schwarze 175: LD_NANOSLEEP="-lrt"
1.24 schwarze 176:
177: # Some platforms may need an additional linker flag for recvmsg(2).
178: # If none is needed or it is -lsocket, it is autodetected.
179: # Otherwise, set the following variable.
180:
181: LD_RECVMSG="-lsocket"
1.17 schwarze 182:
183: # Some platforms might need additional linker flags to link against
184: # libmandoc that are not autodetected, though no such cases are
185: # currently known.
186:
187: LDADD="-lm"
1.12 schwarze 188:
189: # Some systems may want to set additional linker flags for all the
190: # binaries, not only for those using libmandoc, for example for
191: # hardening options.
192:
193: LDFLAGS="-Wl,-z,relro"
1.11 schwarze 194:
1.1 schwarze 195: # It is possible to change the utility program used for installation
196: # and the modes files are installed with. The defaults are:
197:
198: INSTALL="install"
199: INSTALL_PROGRAM="${INSTALL} -m 0555"
200: INSTALL_LIB="${INSTALL} -m 0444"
201: INSTALL_MAN="${INSTALL} -m 0444"
202: INSTALL_DATA="${INSTALL} -m 0444"
203:
1.3 schwarze 204: # When using the "homebrew" package manager on Mac OS X, the actual
205: # manuals are located in a so-called "cellar" and only symlinked
206: # into the manual trees. To allow mandoc to follow such symlinks,
207: # you have to specify the physical location of the cellar as returned
208: # by realpath(3), for example:
209:
1.4 schwarze 210: PREFIX="/usr/local"
211: HOMEBREWDIR="${PREFIX}/Cellar"
1.22 schwarze 212:
213: # --- user settings for the mandoc(3) library --------------------------
214:
215: # By default, libmandoc.a is not installed. It is almost never needed
216: # because there is almost no non-mandoc software out there using this
217: # library. The one notable exception is NetBSD apropos(1).
218: # So, when building for the NetBSD base system - but not for NetBSD
219: # ports nor for pkgsrc! - you may want the following:
220:
221: INSTALL_LIBMANDOC=1
222:
223: # The following settings are only used when INSTALL_LIBMANDOC is set.
224:
225: INCLUDEDIR="${PREFIX}/include/mandoc"
226: LIBDIR="${PREFIX}/lib/mandoc"
1.1 schwarze 227:
1.14 schwarze 228: # --- user settings related to man.cgi ---------------------------------
1.1 schwarze 229:
230: # By default, building man.cgi(8) is disabled. To enable it, copy
231: # cgi.h.example to cgi.h, edit it, and use the following line.
232:
233: BUILD_CGI=1
234:
235: # The remaining settings in this section are only relevant if BUILD_CGI
236: # is enabled. Otherwise, they have no effect either way.
237:
1.34 schwarze 238: # By default, man.cgi(8) is linked statically if the compiler supports
239: # the -static option. If automatic detection fails, you can force
240: # static linking of man.cgi(8).
1.1 schwarze 241:
1.34 schwarze 242: STATIC="-static"
1.1 schwarze 243:
1.34 schwarze 244: # Some systems may require -pthread for static linking:
1.1 schwarze 245:
246: STATIC="-static -pthread"
247:
1.34 schwarze 248: # If static linking works in general but not with additional libraries
249: # like -lrt or -lz, you can force dynamic linking. This may for
250: # example be required on SunOS 5.9.
251:
252: STATIC=" "
253:
1.1 schwarze 254: # Some directories.
255: # This works just like PREFIX, see above.
256:
257: WWWPREFIX="/var/www"
258: HTDOCDIR="${WWWPREFIX}/htdocs"
259: CGIBINDIR="${WWWPREFIX}/cgi-bin"
1.23 schwarze 260:
261: # --- user settings related to catman ----------------------------------
262:
263: # By default, building mandocd(8) and catman(8) is disabled.
264: # To enable it, use the following line.
1.25 schwarze 265: # It does not work on SunOS 5.10 because there is no mkdirat(2)
266: # nor on SunOS 5.9 which also lacks CMSG_LEN(3) and CMSG_SPACE(3).
1.23 schwarze 267:
268: BUILD_CATMAN=1
1.26 schwarze 269:
270: # Install catman(8) with a different name.
271: # See BINM_MAN above for details of how this works.
272:
1.27 schwarze 273: BINM_CATMAN=mcatman # default is "catman"
1.1 schwarze 274:
275: # --- settings that rarely need to be touched --------------------------
276:
277: # Do not set these variables unless you really need to.
1.13 schwarze 278:
1.34 schwarze 279: # Normally, leave CFLAGS unset. In that case, -g will automatically
280: # be used, and various -W options will be added if the compiler
281: # supports them. If you define CFLAGS manually, it will be used
282: # unchanged, and nothing will be added.
1.13 schwarze 283:
284: CFLAGS="-g"
1.1 schwarze 285:
286: # In rare cases, it may be required to skip individual automatic tests.
287: # Each of the following variables can be set to 0 (test will not be run
288: # and will be regarded as failed) or 1 (test will not be run and will
289: # be regarded as successful).
290:
291: HAVE_DIRENT_NAMLEN=0
1.20 schwarze 292: HAVE_ENDIAN=0
1.19 schwarze 293: HAVE_EFTYPE=0
1.11 schwarze 294: HAVE_ERR=0
1.21 schwarze 295: HAVE_FTS=0 # Setting this implies HAVE_FTS_COMPARE_CONST=0.
296: HAVE_FTS_COMPARE_CONST=0 # Setting this implies HAVE_FTS=1.
1.11 schwarze 297: HAVE_GETLINE=0
1.1 schwarze 298: HAVE_GETSUBOPT=0
1.11 schwarze 299: HAVE_ISBLANK=0
1.36 schwarze 300: HAVE_LESS_T=0
1.11 schwarze 301: HAVE_MKDTEMP=0
1.20 schwarze 302: HAVE_NTOHL=0
1.29 schwarze 303: HAVE_O_DIRECTORY=0
1.15 schwarze 304: HAVE_OHASH=0
1.19 schwarze 305: HAVE_PATH_MAX=0
1.11 schwarze 306: HAVE_PLEDGE=0
307: HAVE_PROGNAME=0
1.1 schwarze 308: HAVE_REALLOCARRAY=0
1.31 schwarze 309: HAVE_RECALLOCARRAY=0
1.11 schwarze 310: HAVE_REWB_BSD=0
311: HAVE_REWB_SYSV=0
1.1 schwarze 312: HAVE_STRCASESTR=0
1.11 schwarze 313: HAVE_STRINGLIST=0
1.1 schwarze 314: HAVE_STRLCAT=0
315: HAVE_STRLCPY=0
316: HAVE_STRPTIME=0
317: HAVE_STRSEP=0
1.6 schwarze 318: HAVE_STRTONUM=0
1.20 schwarze 319: HAVE_SYS_ENDIAN=0
1.11 schwarze 320: HAVE_VASPRINTF=0
321: HAVE_WCHAR=0
CVSweb
![[BACK]](/cvsweb/icons/back.gif){kind=icon}
Return to configure.local.example CVS log ![[TXT]](/cvsweb/icons/text.gif){kind=icon}
![[DIR]](/cvsweb/icons/dir.gif){kind=icon}
Up to [cvsweb.bsd.lv] / mandoc