Annotation of mandoc/configure.local.example, Revision 1.7
1.7 ! schwarze 1: # $Id: configure.local.example,v 1.6 2015/02/16 14:56:22 schwarze Exp $
1.1 schwarze 2: #
1.3 schwarze 3: # Copyright (c) 2014, 2015 Ingo Schwarze <schwarze@openbsd.org>
1.1 schwarze 4: #
5: # Permission to use, copy, modify, and distribute this software for any
6: # purpose with or without fee is hereby granted, provided that the above
7: # copyright notice and this permission notice appear in all copies.
8: #
9: # THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
10: # WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
11: # MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
12: # ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
13: # WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
14: # ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
15: # OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
16:
17: # For all settings documented in this file, there are reasonable
18: # defaults and/or the ./configure script attempts autodetection.
19: # Consequently, you only need to create a file ./configure.local
20: # and put any of these settings into it if ./configure autodetection
21: # fails or if you want to make different choices for other reasons.
22:
23: # If autodetection fails, please tell <tech@mdocml.bsd.lv>.
24:
25: # We recommend that you write ./configure.local from scratch and
26: # only put the lines there you need. This file contains examples.
27: # It is not intended as a template to be copied as a whole.
28:
29: # --- user settings relevant for all builds ----------------------------
30:
31: # For -Tutf8 and -Tlocale operation, mandoc(1) requires <locale.h>
32: # providing setlocale(3) and <wchar.h> providing wcwidth(3) and
33: # putwchar(3) with a wchar_t storing UCS-4 values. Theoretically,
34: # the latter should be tested with the __STDC_ISO_10646__ feature
35: # macro. In practice, many <wchar.h> headers do not provide that
36: # macro even though they treat wchar_t as UCS-4. So the automatic
37: # test only checks that wchar_t is wide enough, that is, at least
38: # four bytes.
39:
40: # The following line forces multi-byte support.
41: # If your C library does not treat wchar_t as UCS-4, the UTF-8 output
42: # mode will print garbage.
43:
44: HAVE_WCHAR=1
45:
46: # The following line disables multi-byte support.
47: # The output modes -Tutf8 and -Tlocale will be the same as -Tascii.
48:
49: HAVE_WCHAR=0
1.7 ! schwarze 50:
! 51: # When man(1) or apropos(1) is called without -m and -M options,
! 52: # MANPATH is not set in the environment, man.conf(5) is not available
! 53: # and manpath(1) not used, manuals are searched for in the following
! 54: # directory trees by default.
! 55:
! 56: MANPATH_DEFAULT="/usr/share/man:/usr/X11R6/man:/usr/local/man"
1.1 schwarze 57:
58: # In manual pages written in the mdoc(7) language, the operating system
59: # version is displayed in the page footer line. If an operating system
60: # is specified as an argument to the .Os macro, that is always used.
61: # If the .Os macro has no argument and an operation system is specified
62: # with the mandoc(1) -Ios= command line option, that is used.
63: # Otherwise, the uname(3) library function is called at runtime to find
64: # the name of the operating system.
65: # If you do not want uname(3) to be called but instead want a fixed
66: # string to be used, use the following line:
67:
1.2 schwarze 68: OSNAME="OpenBSD 5.6"
1.1 schwarze 69:
70: # The following installation directories are used.
71: # It is possible to set only one or a few of these variables,
72: # there is no need to copy the whole block.
73: # Even if you set PREFIX to something else, the other variables
74: # pick it up without copying them all over.
75:
76: PREFIX="/usr/local"
77: BINDIR="${PREFIX}/bin"
78: SBINDIR="${PREFIX}/sbin"
79: INCLUDEDIR="${PREFIX}/include/mandoc"
80: LIBDIR="${PREFIX}/lib/mandoc"
81: MANDIR="${PREFIX}/man"
82: EXAMPLEDIR="${PREFIX}/share/examples/mandoc"
83:
1.5 schwarze 84: # The man(1) utility needs to know where the manuals reside.
85: # We know of two ways to tell it: via manpath(1) or man.conf(5).
86: # The latter is used by OpenBSD and NetBSD, the former by most
87: # other systems.
88:
89: # Force usage of manpath(1).
90: # If it is not installed or not operational,
91: # man(1), makewhatis(8), and apropos(1) will not work properly.
92: HAVE_MANPATH=1
93:
94: # Force usage of man.conf(5).
95: # If it does not exist or contains no valid configuration,
96: # man(1), makewhatis(8), and apropos(1) will not work properly.
97: HAVE_MANPATH=0
98:
1.2 schwarze 99: # Some distributions may want to avoid naming conflicts among manuals.
100: # If you want to change the names of installed section 7 manual pages,
101: # the following alternative names are suggested.
102: # The suffix ".7" will automatically be appended.
103: # It is possible to set only one or a few of these variables,
104: # there is no need to copy the whole block.
105:
106: MANM_MAN="mandoc_man" # default is "man"
107: MANM_MDOC="mandoc_mdoc" # default is "mdoc"
108: MANM_ROFF="mandoc_roff" # default is "roff"
109: MANM_EQN="mandoc_eqn" # default is "eqn"
110: MANM_TBL="mandoc_tbl" # default is "tbl"
111:
1.5 schwarze 112: # Some distributions may want to avoid naming conflicts
113: # with another man(1) utility.
114: # If you want to change the name of the binary program,
115: # the following alternative name is suggested.
116: # Using a different name is possible as well.
117: # This changes the name of the installed section 1 manual page as well.
118:
119: BINM_MAN=mman # default is "man"
120:
1.1 schwarze 121: # It is possible to change the utility program used for installation
122: # and the modes files are installed with. The defaults are:
123:
124: INSTALL="install"
125: INSTALL_PROGRAM="${INSTALL} -m 0555"
126: INSTALL_LIB="${INSTALL} -m 0444"
127: INSTALL_MAN="${INSTALL} -m 0444"
128: INSTALL_DATA="${INSTALL} -m 0444"
129:
130: # --- user settings related to database support ------------------------
131:
132: # By default, building makewhatis(8) and apropos(1) is enabled.
133: # To disable it, for example to avoid the dependency on SQLite3,
134: # use the following line. It that case, the remaining settings
135: # in this section are irrelevant.
136:
137: BUILD_DB=0
138:
139: # Two libraries are needed: SQLite3 and ohash(3).
140: # Autoconfiguration tries the following linker flags to find them.
141: # If none of these work, add a working DBLIB line to configure.local,
142: # disabling autodetection for library directories.
143:
144: DBLIB="-lsqlite3"
145: DBLIB="-lsqlite3 -lutil"
146: DBLIB="-L/usr/local/lib -lsqlite3"
147:
148: # When library autodetection decides to use -L/usr/local/lib,
149: # -I/usr/local/include is automatically added to CFLAGS.
150: # If you manually set DBLIB to something including -L/usr/local/lib,
151: # chances are you will also need the following line:
152:
153: CFLAGS="${CFLAGS} -I/usr/local/include"
154:
1.2 schwarze 155: # Some distributions may want to avoid naming conflicts
1.5 schwarze 156: # with another implementation of apropos(1) and makewhatis(8).
157: # If you want to change the names of the binary programs,
1.2 schwarze 158: # the following alternative names are suggested.
159: # Using other names is possible as well.
160: # This changes the names of the installed section 1 and section 8
161: # manual pages as well.
1.5 schwarze 162: # It is possible to set only one or two of these variables,
1.2 schwarze 163: # there is no need to copy the whole block.
164:
165: BINM_APROPOS=mapropos # default is "apropos"
166: BINM_WHATIS=mwhatis # default is "whatis"
167: BINM_MAKEWHATIS=mandocdb # default is "makewhatis"
1.3 schwarze 168:
169: # When using the "homebrew" package manager on Mac OS X, the actual
170: # manuals are located in a so-called "cellar" and only symlinked
171: # into the manual trees. To allow mandoc to follow such symlinks,
172: # you have to specify the physical location of the cellar as returned
173: # by realpath(3), for example:
174:
1.4 schwarze 175: PREFIX="/usr/local"
176: HOMEBREWDIR="${PREFIX}/Cellar"
1.1 schwarze 177:
178: # --- user settings related man.cgi ------------------------------------
179:
180: # By default, building man.cgi(8) is disabled. To enable it, copy
181: # cgi.h.example to cgi.h, edit it, and use the following line.
182: # Obviously, this requires that BUILD_DB is enabled, too.
183:
184: BUILD_CGI=1
185:
186: # The remaining settings in this section are only relevant if BUILD_CGI
187: # is enabled. Otherwise, they have no effect either way.
188:
189: # By default, man.cgi(8) is linked statically.
190: # Some systems do not support static linking, for example Mac OS X.
191: # In that case, use the following line:
192:
193: STATIC=
194:
195: # Some systems, for example Linux, require -pthread for static linking:
196:
197: STATIC="-static -pthread"
198:
199: # Some directories.
200: # This works just like PREFIX, see above.
201:
202: WWWPREFIX="/var/www"
203: HTDOCDIR="${WWWPREFIX}/htdocs"
204: CGIBINDIR="${WWWPREFIX}/cgi-bin"
205:
206: # --- settings that rarely need to be touched --------------------------
207:
208: # Do not set these variables unless you really need to.
209:
210: # You can manually override the compiler to be used.
211: # But that's rarely useful because ./configure asks your make(1)
212: # which compiler to use, and that answer will hardly be wrong.
213:
214: CC=cc
215:
216: # The default compiler flags are:
217:
218: CFLAGS="-g -W -Wall -Wstrict-prototypes -Wno-unused-parameter -Wwrite-strings"
219:
220: # In rare cases, it may be required to skip individual automatic tests.
221: # Each of the following variables can be set to 0 (test will not be run
222: # and will be regarded as failed) or 1 (test will not be run and will
223: # be regarded as successful).
224:
225: HAVE_DIRENT_NAMLEN=0
226: HAVE_FGETLN=0
227: HAVE_FTS=0
228: HAVE_GETSUBOPT=0
229: HAVE_MMAP=0
230: HAVE_REALLOCARRAY=0
231: HAVE_STRCASESTR=0
232: HAVE_STRLCAT=0
233: HAVE_STRLCPY=0
234: HAVE_STRPTIME=0
235: HAVE_STRSEP=0
1.6 schwarze 236: HAVE_STRTONUM=0
1.1 schwarze 237:
238: HAVE_SQLITE3=0
239: HAVE_SQLITE3_ERRSTR=0
240: HAVE_OHASH=0
CVSweb
![[BACK]](/cvsweb/icons/back.gif){kind=icon}
Return to configure.local.example CVS log ![[TXT]](/cvsweb/icons/text.gif){kind=icon}
![[DIR]](/cvsweb/icons/dir.gif){kind=icon}
Up to [cvsweb.bsd.lv] / mandoc