Return to configure.local.example CVS log

Up to [cvsweb.bsd.lv] / mandoc

Various people (among others Maxim Belooussov and Carsten Kunze)
reported that the build system still assumed that ohash is only
needed if sqlite3 is also in use, which is no longer true:
The ohash library is now required no matter what.

Rework sqlite3 and ohash library autodetection
such that both work independently of each other.
Provide LDADD for additional linker flags.
Add some missing variables to configure.local.example.

# $Id: configure.local.example,v 1.11 2016/05/18 21:37:04 schwarze Exp $
#
# Copyright (c) 2014, 2015, 2016 Ingo Schwarze <schwarze@openbsd.org>
#
# Permission to use, copy, modify, and distribute this software for any
# purpose with or without fee is hereby granted, provided that the above
# copyright notice and this permission notice appear in all copies.
#
# THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
# WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
# MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
# ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
# WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
# ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
# OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.

# For all settings documented in this file, there are reasonable
# defaults and/or the ./configure script attempts autodetection.
# Consequently, you only need to create a file ./configure.local
# and put any of these settings into it if ./configure autodetection
# fails or if you want to make different choices for other reasons.

# If autodetection fails, please tell <tech@mdocml.bsd.lv>.

# We recommend that you write ./configure.local from scratch and
# only put the lines there you need.  This file contains examples.
# It is not intended as a template to be copied as a whole.

# --- user settings relevant for all builds ----------------------------

# For -Tutf8 and -Tlocale operation, mandoc(1) requires <locale.h>
# providing setlocale(3) and <wchar.h> providing wcwidth(3) and
# putwchar(3) with a wchar_t storing UCS-4 values.  Theoretically,
# the latter should be tested with the __STDC_ISO_10646__ feature
# macro.  In practice, many <wchar.h> headers do not provide that
# macro even though they treat wchar_t as UCS-4.  So the automatic
# test only checks that wchar_t is wide enough, that is, at least
# four bytes.

# The following line forces multi-byte support.
# If your C library does not treat wchar_t as UCS-4, the UTF-8 output
# mode will print garbage.

HAVE_WCHAR=1

# The following line disables multi-byte support.
# The output modes -Tutf8 and -Tlocale will be the same as -Tascii.

HAVE_WCHAR=0

# When man(1) or apropos(1) is called without -m and -M options,
# MANPATH is not set in the environment, man.conf(5) is not available
# and manpath(1) not used, manuals are searched for in the following
# directory trees by default.

MANPATH_DEFAULT="/usr/share/man:/usr/X11R6/man:/usr/local/man"

# In manual pages written in the mdoc(7) language, the operating system
# version is displayed in the page footer line.  If an operating system
# is specified as an argument to the .Os macro, that is always used.
# If the .Os macro has no argument and an operation system is specified
# with the mandoc(1) -Ios= command line option, that is used.
# Otherwise, the uname(3) library function is called at runtime to find
# the name of the operating system.
# If you do not want uname(3) to be called but instead want a fixed
# string to be used, use the following line:

OSNAME="OpenBSD 5.9"

# The following installation directories are used.
# It is possible to set only one or a few of these variables,
# there is no need to copy the whole block.
# Even if you set PREFIX to something else, the other variables
# pick it up without copying them all over.

PREFIX="/usr/local"
BINDIR="${PREFIX}/bin"
SBINDIR="${PREFIX}/sbin"
INCLUDEDIR="${PREFIX}/include/mandoc"
LIBDIR="${PREFIX}/lib/mandoc"
MANDIR="${PREFIX}/man"

# The man(1) utility needs to know where the manuals reside.
# We know of two ways to tell it: via manpath(1) or man.conf(5).
# The latter is used by OpenBSD and NetBSD, the former by most
# other systems.

# Force usage of manpath(1).
# If it is not installed or not operational,
# man(1), makewhatis(8), and apropos(1) will not work properly.
HAVE_MANPATH=1

# Force usage of man.conf(5).
# If it does not exist or contains no valid configuration,
# man(1), makewhatis(8), and apropos(1) will not work properly.
HAVE_MANPATH=0

# Some distributions may want to avoid naming conflicts
# with the configuration files of other man(1) implementations.
# This changes the name of the installed section 5 manual page as well.
MANM_MANCONF="mandoc.conf"	# default is "man.conf"

# Some distributions may want to avoid naming conflicts among manuals.
# If you want to change the names of installed section 7 manual pages,
# the following alternative names are suggested.
# The suffix ".7" will automatically be appended.
# It is possible to set only one or a few of these variables,
# there is no need to copy the whole block.

MANM_MAN="mandoc_man"		# default is "man"
MANM_MDOC="mandoc_mdoc"		# default is "mdoc"
MANM_ROFF="mandoc_roff"		# default is "roff"
MANM_EQN="mandoc_eqn"		# default is "eqn"
MANM_TBL="mandoc_tbl"		# default is "tbl"

# Some distributions may want to avoid naming conflicts
# with other man(1) and soelim(1) utilities.
# If you want to change the names of binary programs,
# the following alternative names are suggested.
# Using different names is possible as well.
# This changes the names of the installed section 1 manual pages as well.

BINM_MAN=mman			# default is "man"
BINM_SOELIM=msoelim		# default is "soelim"

# Before falling back to the bundled version of the ohash(3) hashing
# library, autoconfiguration tries the following linker flag to
# link against your system version.  If you do have ohash(3) on
# your system but it needs different linker flags, set the following
# variable to specify the required linker flags.

LD_OHASH="-lutil"

# Some platforms may need additional linker flags that are not autodetected.
# For example, Solaris 9 and 10 need -lrt for nanosleep(2).

LDADD="-lrt"

# It is possible to change the utility program used for installation
# and the modes files are installed with.  The defaults are:

INSTALL="install"
INSTALL_PROGRAM="${INSTALL} -m 0555"
INSTALL_LIB="${INSTALL} -m 0444"
INSTALL_MAN="${INSTALL} -m 0444"
INSTALL_DATA="${INSTALL} -m 0444"

# --- user settings related to database support ------------------------

# By default, building makewhatis(8) and apropos(1) is enabled.
# To disable it, for example to avoid the dependency on SQLite3,
# use the following line.  It that case, the remaining settings
# in this section are irrelevant.

BUILD_DB=0

# Autoconfiguration tries the following linker flags to find the
# SQLite3 library installed on your system.  If none of these work,
# set the following variable to specify the required linker flags.

LD_SQLITE3="-lsqlite3"
LD_SQLITE3="-L/usr/local/lib -lsqlite3"

# When library autodetection decides to use -L/usr/local/lib,
# -I/usr/local/include is automatically added to CFLAGS.
# If you manually set LD_SQLITE3 to something including -L/usr/local/lib,
# chances are you will also need the following line:

CFLAGS="${CFLAGS} -I/usr/local/include"

# Some distributions may want to avoid naming conflicts
# with another implementation of apropos(1) and makewhatis(8).
# If you want to change the names of the binary programs,
# the following alternative names are suggested.
# Using other names is possible as well.
# This changes the names of the installed section 1 and section 8
# manual pages as well.
# It is possible to set only one or two of these variables,
# there is no need to copy the whole block.

BINM_APROPOS=mapropos		# default is "apropos"
BINM_WHATIS=mwhatis		# default is "whatis"
BINM_MAKEWHATIS=mandocdb	# default is "makewhatis"

# When using the "homebrew" package manager on Mac OS X, the actual
# manuals are located in a so-called "cellar" and only symlinked
# into the manual trees.  To allow mandoc to follow such symlinks,
# you have to specify the physical location of the cellar as returned
# by realpath(3), for example:

PREFIX="/usr/local"
HOMEBREWDIR="${PREFIX}/Cellar"

# --- user settings related man.cgi ------------------------------------

# By default, building man.cgi(8) is disabled.  To enable it, copy
# cgi.h.example to cgi.h, edit it, and use the following line.
# Obviously, this requires that BUILD_DB is enabled, too.

BUILD_CGI=1

# The remaining settings in this section are only relevant if BUILD_CGI
# is enabled.  Otherwise, they have no effect either way.

# By default, man.cgi(8) is linked statically.
# Some systems do not support static linking, for example Mac OS X.
# In that case, use the following line:

STATIC=

# Some systems, for example Linux, require -pthread for static linking:

STATIC="-static -pthread"

# Some directories.
# This works just like PREFIX, see above.

WWWPREFIX="/var/www"
HTDOCDIR="${WWWPREFIX}/htdocs"
CGIBINDIR="${WWWPREFIX}/cgi-bin"

# --- settings that rarely need to be touched --------------------------

# Do not set these variables unless you really need to.

# You can manually override the compiler to be used.
# But that's rarely useful because ./configure asks your make(1)
# which compiler to use, and that answer will hardly be wrong.

CC=cc

# The default compiler flags are:

CFLAGS="-g -W -Wall -Wstrict-prototypes -Wno-unused-parameter -Wwrite-strings"

# In rare cases, it may be required to skip individual automatic tests.
# Each of the following variables can be set to 0 (test will not be run
# and will be regarded as failed) or 1 (test will not be run and will
# be regarded as successful).

HAVE_DIRENT_NAMLEN=0
HAVE_ERR=0
HAVE_FTS=0
HAVE_GETLINE=0
HAVE_GETSUBOPT=0
HAVE_ISBLANK=0
HAVE_MKDTEMP=0
HAVE_MMAP=0
HAVE_PLEDGE=0
HAVE_PROGNAME=0
HAVE_REALLOCARRAY=0
HAVE_REWB_BSD=0
HAVE_REWB_SYSV=0
HAVE_STRCASESTR=0
HAVE_STRINGLIST=0
HAVE_STRLCAT=0
HAVE_STRLCPY=0
HAVE_STRPTIME=0
HAVE_STRSEP=0
HAVE_STRTONUM=0
HAVE_VASPRINTF=0
HAVE_WCHAR=0

HAVE_SQLITE3=0
HAVE_SQLITE3_ERRSTR=0
HAVE_OHASH=0