[BACK]Return to man.7 CVS log [TXT][DIR] Up to [cvsweb.bsd.lv] / mandoc

Annotation of mandoc/man.7, Revision 1.94

1.94    ! kristaps    1: .\"    $Id: man.7,v 1.93 2010/12/29 16:18:13 kristaps Exp $
1.1       kristaps    2: .\"
1.78      schwarze    3: .\" Copyright (c) 2009, 2010 Kristaps Dzonsons <kristaps@bsd.lv>
1.1       kristaps    4: .\"
                      5: .\" Permission to use, copy, modify, and distribute this software for any
1.10      kristaps    6: .\" purpose with or without fee is hereby granted, provided that the above
                      7: .\" copyright notice and this permission notice appear in all copies.
                      8: .\"
                      9: .\" THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
                     10: .\" WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
                     11: .\" MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
                     12: .\" ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
                     13: .\" WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
                     14: .\" ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
                     15: .\" OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
1.1       kristaps   16: .\"
1.94    ! kristaps   17: .Dd $Mdocdate: December 29 2010 $
1.9       kristaps   18: .Dt MAN 7
1.1       kristaps   19: .Os
                     20: .Sh NAME
1.32      kristaps   21: .Nm man
                     22: .Nd man language reference
1.1       kristaps   23: .Sh DESCRIPTION
                     24: The
1.32      kristaps   25: .Nm man
1.20      kristaps   26: language was historically used to format
1.32      kristaps   27: .Ux
1.68      kristaps   28: manuals.
                     29: This reference document describes its syntax, structure, and usage.
1.32      kristaps   30: .Pp
                     31: .Bf -emphasis
1.20      kristaps   32: Do not use
1.32      kristaps   33: .Nm
1.20      kristaps   34: to write your manuals.
1.32      kristaps   35: .Ef
1.19      kristaps   36: Use the
1.32      kristaps   37: .Xr mdoc 7
1.1       kristaps   38: language, instead.
1.32      kristaps   39: .Pp
1.78      schwarze   40: A
1.32      kristaps   41: .Nm
1.1       kristaps   42: document follows simple rules:  lines beginning with the control
1.20      kristaps   43: character
1.32      kristaps   44: .Sq \&.
1.68      kristaps   45: are parsed for macros.
                     46: Other lines are interpreted within the scope of
1.1       kristaps   47: prior macros:
1.32      kristaps   48: .Bd -literal -offset indent
1.1       kristaps   49: \&.SH Macro lines change control state.
                     50: Other lines are interpreted within the current state.
1.32      kristaps   51: .Ed
1.1       kristaps   52: .Sh INPUT ENCODING
1.32      kristaps   53: .Nm
1.14      kristaps   54: documents may contain only graphable 7-bit ASCII characters, the
1.78      schwarze   55: space character, and the tab character.
1.68      kristaps   56: All manuals must have
1.32      kristaps   57: .Ux
1.20      kristaps   58: line termination.
1.32      kristaps   59: .Pp
1.5       kristaps   60: Blank lines are acceptable; where found, the output will assert a
1.1       kristaps   61: vertical space.
1.32      kristaps   62: .Ss Comments
1.21      kristaps   63: Text following a
1.75      kristaps   64: .Sq \e\*q ,
1.21      kristaps   65: whether in a macro or free-form text line, is ignored to the end of
1.68      kristaps   66: line.
                     67: A macro line with only a control character and comment escape,
1.75      kristaps   68: .Sq \&.\e\*q ,
1.68      kristaps   69: is also ignored.
                     70: Macro lines with only a control character and optionally whitespace are
                     71: stripped from input.
1.32      kristaps   72: .Ss Special Characters
1.21      kristaps   73: Special characters may occur in both macro and free-form lines.
                     74: Sequences begin with the escape character
1.32      kristaps   75: .Sq \e
1.20      kristaps   76: followed by either an open-parenthesis
1.32      kristaps   77: .Sq \&(
1.1       kristaps   78: for two-character sequences; an open-bracket
1.32      kristaps   79: .Sq \&[
1.1       kristaps   80: for n-character sequences (terminated at a close-bracket
1.32      kristaps   81: .Sq \&] ) ;
1.68      kristaps   82: or a single one-character sequence.
                     83: See
1.32      kristaps   84: .Xr mandoc_char 7
1.68      kristaps   85: for a complete list.
                     86: Examples include
1.32      kristaps   87: .Sq \e(em
                     88: .Pq em-dash
1.21      kristaps   89: and
1.32      kristaps   90: .Sq \ee
                     91: .Pq back-slash .
                     92: .Ss Text Decoration
1.21      kristaps   93: Terms may be text-decorated using the
1.32      kristaps   94: .Sq \ef
1.78      schwarze   95: escape followed by an indicator: B (bold), I (italic), R (Roman), or P
1.55      kristaps   96: (revert to previous mode):
1.48      kristaps   97: .Pp
                     98: .D1 \efBbold\efR \efIitalic\efP
                     99: .Pp
                    100: A numerical representation 3, 2, or 1 (bold, italic, and Roman,
1.68      kristaps  101: respectively) may be used instead.
                    102: A text decoration is only valid, if specified in free-form text, until
                    103: the next macro invocation; if specified within a macro, it's only valid
                    104: until the macro closes scope.
1.54      kristaps  105: Note that macros like
                    106: .Sx \&BR
                    107: open and close a font scope with each argument.
1.48      kristaps  108: .Pp
1.76      kristaps  109: The
1.49      kristaps  110: .Sq \ef
1.76      kristaps  111: attribute is forgotten when entering or exiting a macro block.
1.32      kristaps  112: .Ss Whitespace
1.66      kristaps  113: Whitespace consists of the space character.
1.80      kristaps  114: In free-form lines, whitespace is preserved within a line; unescaped
1.64      kristaps  115: trailing spaces are stripped from input (unless in a literal context).
                    116: Blank free-form lines, which may include spaces, are permitted and
                    117: rendered as an empty line.
                    118: .Pp
1.68      kristaps  119: In macro lines, whitespace delimits arguments and is discarded.
                    120: If arguments are quoted, whitespace within the quotes is retained.
1.43      kristaps  121: .Ss Dates
                    122: The
                    123: .Sx \&TH
                    124: macro is the only
                    125: .Nm
1.68      kristaps  126: macro that requires a date.
                    127: The form for this date is the ISO-8601
1.43      kristaps  128: standard
                    129: .Cm YYYY-MM-DD .
1.38      kristaps  130: .Ss Scaling Widths
                    131: Many macros support scaled widths for their arguments, such as
                    132: stipulating a two-inch paragraph indentation with the following:
                    133: .Bd -literal -offset indent
                    134: \&.HP 2i
                    135: .Ed
                    136: .Pp
                    137: The syntax for scaled widths is
                    138: .Sq Li [+-]?[0-9]*.[0-9]*[:unit:]? ,
                    139: where a decimal must be preceded or proceeded by at least one digit.
1.68      kristaps  140: Negative numbers, while accepted, are truncated to zero.
                    141: The following scaling units are accepted:
1.38      kristaps  142: .Pp
                    143: .Bl -tag -width Ds -offset indent -compact
                    144: .It c
                    145: centimetre
                    146: .It i
                    147: inch
                    148: .It P
                    149: pica (~1/6 inch)
                    150: .It p
                    151: point (~1/72 inch)
                    152: .It f
                    153: synonym for
                    154: .Sq u
                    155: .It v
                    156: default vertical span
                    157: .It m
                    158: width of rendered
                    159: .Sq m
                    160: .Pq em
                    161: character
                    162: .It n
                    163: width of rendered
                    164: .Sq n
                    165: .Pq en
                    166: character
                    167: .It u
                    168: default horizontal span
                    169: .It M
                    170: mini-em (~1/100 em)
                    171: .El
                    172: .Pp
                    173: Using anything other than
                    174: .Sq m ,
                    175: .Sq n ,
                    176: .Sq u ,
                    177: or
                    178: .Sq v
1.44      kristaps  179: is necessarily non-portable across output media.
1.38      kristaps  180: .Pp
                    181: If a scaling unit is not provided, the numerical value is interpreted
                    182: under the default rules of
                    183: .Sq v
                    184: for vertical spaces and
                    185: .Sq u
                    186: for horizontal ones.
                    187: .Em Note :
                    188: this differs from
                    189: .Xr mdoc 7 ,
                    190: which, if a unit is not provided, will instead interpret the string as
                    191: literal text.
1.69      kristaps  192: .Ss Sentence Spacing
1.80      kristaps  193: When composing a manual, make sure that sentences end at the end of
1.69      kristaps  194: a line.
                    195: By doing so, front-ends will be able to apply the proper amount of
1.71      kristaps  196: spacing after the end of sentence (unescaped) period, exclamation mark,
                    197: or question mark followed by zero or more non-sentence closing
1.80      kristaps  198: delimiters
                    199: .Po
                    200: .Sq \&) ,
1.71      kristaps  201: .Sq \&] ,
                    202: .Sq \&' ,
1.80      kristaps  203: .Sq \&"
                    204: .Pc .
1.22      kristaps  205: .Sh MANUAL STRUCTURE
1.16      kristaps  206: Each
1.32      kristaps  207: .Nm
1.80      kristaps  208: document must contain the
1.39      kristaps  209: .Sx \&TH
1.68      kristaps  210: macro describing the document's section and title.
1.80      kristaps  211: It may occur anywhere in the document, although conventionally it
1.68      kristaps  212: appears as the first macro.
1.32      kristaps  213: .Pp
1.22      kristaps  214: Beyond
1.39      kristaps  215: .Sx \&TH ,
1.68      kristaps  216: at least one macro or text node must appear in the document.
                    217: Documents are generally structured as follows:
1.32      kristaps  218: .Bd -literal -offset indent
1.43      kristaps  219: \&.TH FOO 1 2009-10-10
1.22      kristaps  220: \&.SH NAME
1.29      kristaps  221: \efBfoo\efR \e(en a description goes here
1.33      kristaps  222: \&.\e\*q .SH LIBRARY
1.86      kristaps  223: \&.\e\*q For sections 2 & 3 only.
                    224: \&.\e\*q Not used in OpenBSD.
1.22      kristaps  225: \&.SH SYNOPSIS
                    226: \efBfoo\efR [\efB\e-options\efR] arguments...
                    227: \&.SH DESCRIPTION
1.33      kristaps  228: The \efBfoo\efR utility processes files...
                    229: \&.\e\*q .SH IMPLEMENTATION NOTES
1.89      schwarze  230: \&.\e\*q Not used in OpenBSD.
1.22      kristaps  231: \&.\e\*q .SH RETURN VALUES
1.86      kristaps  232: \&.\e\*q For sections 2, 3, & 9 only.
1.22      kristaps  233: \&.\e\*q .SH ENVIRONMENT
1.86      kristaps  234: \&.\e\*q For sections 1, 6, 7, & 8 only.
1.22      kristaps  235: \&.\e\*q .SH FILES
1.67      kristaps  236: \&.\e\*q .SH EXIT STATUS
1.89      schwarze  237: \&.\e\*q For sections 1, 6, & 8 only.
1.22      kristaps  238: \&.\e\*q .SH EXAMPLES
                    239: \&.\e\*q .SH DIAGNOSTICS
1.86      kristaps  240: \&.\e\*q For sections 1, 4, 6, 7, & 8 only.
1.22      kristaps  241: \&.\e\*q .SH ERRORS
1.86      kristaps  242: \&.\e\*q For sections 2, 3, & 9 only.
1.22      kristaps  243: \&.\e\*q .SH SEE ALSO
1.42      kristaps  244: \&.\e\*q .BR foo ( 1 )
1.22      kristaps  245: \&.\e\*q .SH STANDARDS
                    246: \&.\e\*q .SH HISTORY
                    247: \&.\e\*q .SH AUTHORS
                    248: \&.\e\*q .SH CAVEATS
                    249: \&.\e\*q .SH BUGS
1.33      kristaps  250: \&.\e\*q .SH SECURITY CONSIDERATIONS
1.86      kristaps  251: \&.\e\*q Not used in OpenBSD.
1.32      kristaps  252: .Ed
1.41      kristaps  253: .Pp
                    254: The sections in a
                    255: .Nm
1.68      kristaps  256: document are conventionally ordered as they appear above.
                    257: Sections should be composed as follows:
1.42      kristaps  258: .Bl -ohang -offset indent
                    259: .It Em NAME
1.68      kristaps  260: The name(s) and a short description of the documented material.
                    261: The syntax for this is generally as follows:
1.41      kristaps  262: .Pp
                    263: .D1 \efBname\efR \e(en description
1.42      kristaps  264: .It Em LIBRARY
1.41      kristaps  265: The name of the library containing the documented material, which is
1.68      kristaps  266: assumed to be a function in a section 2 or 3 manual.
                    267: For functions in the C library, this may be as follows:
1.41      kristaps  268: .Pp
                    269: .D1 Standard C Library (libc, -lc)
1.42      kristaps  270: .It Em SYNOPSIS
1.41      kristaps  271: Documents the utility invocation syntax, function call syntax, or device
1.55      kristaps  272: configuration.
1.41      kristaps  273: .Pp
                    274: For the first, utilities (sections 1, 6, and 8), this is
                    275: generally structured as follows:
                    276: .Pp
                    277: .D1 \efBname\efR [-\efBab\efR] [-\efBc\efR\efIarg\efR] \efBpath\efR...
                    278: .Pp
                    279: For the second, function calls (sections 2, 3, 9):
                    280: .Pp
1.44      kristaps  281: .D1 \&.B char *name(char *\efIarg\efR);
1.41      kristaps  282: .Pp
                    283: And for the third, configurations (section 4):
                    284: .Pp
1.44      kristaps  285: .D1 \&.B name* at cardbus ? function ?
1.41      kristaps  286: .Pp
1.55      kristaps  287: Manuals not in these sections generally don't need a
1.42      kristaps  288: .Em SYNOPSIS .
                    289: .It Em DESCRIPTION
1.55      kristaps  290: This expands upon the brief, one-line description in
1.42      kristaps  291: .Em NAME .
                    292: It usually contains a break-down of the options (if documenting a
                    293: command).
                    294: .It Em IMPLEMENTATION NOTES
1.68      kristaps  295: Implementation-specific notes should be kept here.
                    296: This is useful when implementing standard functions that may have side
                    297: effects or notable algorithmic implications.
1.42      kristaps  298: .It Em RETURN VALUES
1.80      kristaps  299: This section documents the return values of functions in sections 2, 3, and 9.
1.42      kristaps  300: .It Em ENVIRONMENT
                    301: Documents any usages of environment variables, e.g.,
                    302: .Xr environ 7 .
                    303: .It Em FILES
1.68      kristaps  304: Documents files used.
1.78      schwarze  305: It's helpful to document both the file name and a short description of how
1.68      kristaps  306: the file is used (created, modified, etc.).
1.67      kristaps  307: .It Em EXIT STATUS
1.80      kristaps  308: This section documents the command exit status for
                    309: section 1, 6, and 8 utilities.
1.68      kristaps  310: Historically, this information was described in
1.67      kristaps  311: .Em DIAGNOSTICS ,
                    312: a practise that is now discouraged.
1.42      kristaps  313: .It Em EXAMPLES
1.68      kristaps  314: Example usages.
                    315: This often contains snippets of well-formed,
                    316: well-tested invocations.
1.80      kristaps  317: Make sure that examples work properly!
1.42      kristaps  318: .It Em DIAGNOSTICS
1.68      kristaps  319: Documents error conditions.
                    320: This is most useful in section 4 manuals.
1.42      kristaps  321: Historically, this section was used in place of
                    322: .Em EXIT STATUS
                    323: for manuals in sections 1, 6, and 8; however, this practise is
                    324: discouraged.
                    325: .It Em ERRORS
                    326: Documents error handling in sections 2, 3, and 9.
                    327: .It Em SEE ALSO
1.68      kristaps  328: References other manuals with related topics.
                    329: This section should exist for most manuals.
1.44      kristaps  330: .Pp
                    331: .D1 \&.BR bar \&( 1 \&),
                    332: .Pp
                    333: Cross-references should conventionally be ordered
1.42      kristaps  334: first by section, then alphabetically.
                    335: .It Em STANDARDS
                    336: References any standards implemented or used, such as
                    337: .Pp
                    338: .D1 IEEE Std 1003.2 (\e(lqPOSIX.2\e(rq)
                    339: .Pp
                    340: If not adhering to any standards, the
                    341: .Em HISTORY
                    342: section should be used.
                    343: .It Em HISTORY
1.81      schwarze  344: A brief history of the subject, including where support first appeared.
1.42      kristaps  345: .It Em AUTHORS
1.81      schwarze  346: Credits to the person or persons who wrote the code and/or documentation.
1.78      schwarze  347: Authors should generally be noted by both name and email address.
1.42      kristaps  348: .It Em CAVEATS
1.78      schwarze  349: Common misuses and misunderstandings should be explained
1.42      kristaps  350: in this section.
                    351: .It Em BUGS
1.80      kristaps  352: Known bugs, limitations, and work-arounds should be described
1.78      schwarze  353: in this section.
1.42      kristaps  354: .It Em SECURITY CONSIDERATIONS
                    355: Documents any security precautions that operators should consider.
1.41      kristaps  356: .El
1.22      kristaps  357: .Sh MACRO SYNTAX
1.80      kristaps  358: Macros are one to three characters in length and begin with a
1.78      schwarze  359: control character,
1.32      kristaps  360: .Sq \&. ,
1.68      kristaps  361: at the beginning of the line.
                    362: The
1.59      kristaps  363: .Sq \(aq
1.68      kristaps  364: macro control character is also accepted.
                    365: An arbitrary amount of whitespace (spaces or tabs) may sit between the
                    366: control character and the macro name.
                    367: Thus, the following are equivalent:
1.39      kristaps  368: .Bd -literal -offset indent
                    369: \&.PP
                    370: \&.\ \ \ PP
                    371: .Ed
1.32      kristaps  372: .Pp
1.1       kristaps  373: The
1.32      kristaps  374: .Nm
1.68      kristaps  375: macros are classified by scope: line scope or block scope.
                    376: Line macros are only scoped to the current line (and, in some
                    377: situations, the subsequent line).
                    378: Block macros are scoped to the current line and subsequent lines until
                    379: closed by another block macro.
1.32      kristaps  380: .Ss Line Macros
1.30      kristaps  381: Line macros are generally scoped to the current line, with the body
1.68      kristaps  382: consisting of zero or more arguments.
                    383: If a macro is scoped to the next line and the line arguments are empty,
                    384: the next line, which must be text, is used instead.
                    385: Thus:
1.32      kristaps  386: .Bd -literal -offset indent
1.30      kristaps  387: \&.I
1.4       kristaps  388: foo
1.32      kristaps  389: .Ed
                    390: .Pp
1.20      kristaps  391: is equivalent to
1.32      kristaps  392: .Sq \&.I foo .
1.56      kristaps  393: If next-line macros are invoked consecutively, only the last is used.
                    394: If a next-line macro is followed by a non-next-line macro, an error is
1.78      schwarze  395: raised, except for
1.56      kristaps  396: .Sx \&br ,
                    397: .Sx \&sp ,
1.78      schwarze  398: and
                    399: .Sx \&na .
1.56      kristaps  400: .Pp
                    401: The syntax is as follows:
1.32      kristaps  402: .Bd -literal -offset indent
1.22      kristaps  403: \&.YO \(lBbody...\(rB
                    404: \(lBbody...\(rB
1.32      kristaps  405: .Ed
                    406: .Pp
1.57      kristaps  407: .Bl -column -compact -offset indent "MacroX" "ArgumentsX" "ScopeXXXXX" "CompatX"
                    408: .It Em Macro Ta Em Arguments Ta Em Scope     Ta Em Notes
1.73      kristaps  409: .It Sx \&AT  Ta    <=1       Ta    current   Ta    \&
1.57      kristaps  410: .It Sx \&B   Ta    n         Ta    next-line Ta    \&
                    411: .It Sx \&BI  Ta    n         Ta    current   Ta    \&
                    412: .It Sx \&BR  Ta    n         Ta    current   Ta    \&
                    413: .It Sx \&DT  Ta    0         Ta    current   Ta    \&
                    414: .It Sx \&I   Ta    n         Ta    next-line Ta    \&
                    415: .It Sx \&IB  Ta    n         Ta    current   Ta    \&
                    416: .It Sx \&IR  Ta    n         Ta    current   Ta    \&
                    417: .It Sx \&R   Ta    n         Ta    next-line Ta    \&
                    418: .It Sx \&RB  Ta    n         Ta    current   Ta    \&
                    419: .It Sx \&RI  Ta    n         Ta    current   Ta    \&
                    420: .It Sx \&SB  Ta    n         Ta    next-line Ta    \&
                    421: .It Sx \&SM  Ta    n         Ta    next-line Ta    \&
                    422: .It Sx \&TH  Ta    >1, <6    Ta    current   Ta    \&
1.73      kristaps  423: .It Sx \&UC  Ta    <=1       Ta    current   Ta    \&
1.57      kristaps  424: .It Sx \&br  Ta    0         Ta    current   Ta    compat
                    425: .It Sx \&fi  Ta    0         Ta    current   Ta    compat
1.91      kristaps  426: .It Sx \&ft  Ta    1         Ta    current   Ta    compat
1.79      kristaps  427: .It Sx \&in  Ta    1         Ta    current   Ta    compat
1.57      kristaps  428: .It Sx \&na  Ta    0         Ta    current   Ta    compat
                    429: .It Sx \&nf  Ta    0         Ta    current   Ta    compat
                    430: .It Sx \&sp  Ta    1         Ta    current   Ta    compat
1.32      kristaps  431: .El
                    432: .Pp
1.57      kristaps  433: Macros marked as
                    434: .Qq compat
                    435: are included for compatibility with the significant corpus of existing
1.68      kristaps  436: manuals that mix dialects of roff.
                    437: These macros should not be used for portable
1.58      kristaps  438: .Nm
                    439: manuals.
1.32      kristaps  440: .Ss Block Macros
1.80      kristaps  441: Block macros comprise a head and body.
                    442: As with in-line macros, the head is scoped to the current line and, in
1.68      kristaps  443: one circumstance, the next line (the next-line stipulations as in
1.57      kristaps  444: .Sx Line Macros
                    445: apply here as well).
1.56      kristaps  446: .Pp
                    447: The syntax is as follows:
1.32      kristaps  448: .Bd -literal -offset indent
1.22      kristaps  449: \&.YO \(lBhead...\(rB
                    450: \(lBhead...\(rB
                    451: \(lBbody...\(rB
1.32      kristaps  452: .Ed
                    453: .Pp
1.30      kristaps  454: The closure of body scope may be to the section, where a macro is closed
                    455: by
1.39      kristaps  456: .Sx \&SH ;
1.30      kristaps  457: sub-section, closed by a section or
1.39      kristaps  458: .Sx \&SS ;
1.30      kristaps  459: part, closed by a section, sub-section, or
1.39      kristaps  460: .Sx \&RE ;
1.55      kristaps  461: or paragraph, closed by a section, sub-section, part,
1.39      kristaps  462: .Sx \&HP ,
                    463: .Sx \&IP ,
                    464: .Sx \&LP ,
                    465: .Sx \&P ,
                    466: .Sx \&PP ,
1.30      kristaps  467: or
1.39      kristaps  468: .Sx \&TP .
1.30      kristaps  469: No closure refers to an explicit block closing macro.
1.32      kristaps  470: .Pp
1.58      kristaps  471: As a rule, block macros may not be nested; thus, calling a block macro
                    472: while another block macro scope is open, and the open scope is not
                    473: implicitly closed, is syntactically incorrect.
                    474: .Pp
1.57      kristaps  475: .Bl -column -compact -offset indent "MacroX" "ArgumentsX" "Head ScopeX" "sub-sectionX" "compatX"
                    476: .It Em Macro Ta Em Arguments Ta Em Head Scope Ta Em Body Scope  Ta Em Notes
                    477: .It Sx \&HP  Ta    <2        Ta    current    Ta    paragraph   Ta    \&
                    478: .It Sx \&IP  Ta    <3        Ta    current    Ta    paragraph   Ta    \&
                    479: .It Sx \&LP  Ta    0         Ta    current    Ta    paragraph   Ta    \&
                    480: .It Sx \&P   Ta    0         Ta    current    Ta    paragraph   Ta    \&
                    481: .It Sx \&PP  Ta    0         Ta    current    Ta    paragraph   Ta    \&
                    482: .It Sx \&RE  Ta    0         Ta    current    Ta    none        Ta    compat
                    483: .It Sx \&RS  Ta    1         Ta    current    Ta    part        Ta    compat
                    484: .It Sx \&SH  Ta    >0        Ta    next-line  Ta    section     Ta    \&
                    485: .It Sx \&SS  Ta    >0        Ta    next-line  Ta    sub-section Ta    \&
                    486: .It Sx \&TP  Ta    n         Ta    next-line  Ta    paragraph   Ta    \&
1.32      kristaps  487: .El
1.57      kristaps  488: .Pp
                    489: Macros marked
                    490: .Qq compat
                    491: are as mentioned in
                    492: .Sx Line Macros .
1.32      kristaps  493: .Pp
1.22      kristaps  494: If a block macro is next-line scoped, it may only be followed by in-line
1.57      kristaps  495: macros for decorating text.
1.22      kristaps  496: .Sh REFERENCE
                    497: This section is a canonical reference to all macros, arranged
1.68      kristaps  498: alphabetically.
                    499: For the scoping of individual macros, see
1.32      kristaps  500: .Sx MACRO SYNTAX .
1.72      joerg     501: .Ss \&AT
                    502: Sets the volume for the footer for compatibility with man pages from
                    503: .Tn AT&T UNIX
                    504: releases.
                    505: The optional arguments specify which release it is from.
1.39      kristaps  506: .Ss \&B
1.22      kristaps  507: Text is rendered in bold face.
1.44      kristaps  508: .Pp
                    509: See also
1.92      kristaps  510: .Sx \&I
1.44      kristaps  511: and
1.92      kristaps  512: .Sx \&R .
1.39      kristaps  513: .Ss \&BI
1.68      kristaps  514: Text is rendered alternately in bold face and italic.
                    515: Thus,
1.32      kristaps  516: .Sq .BI this word and that
1.22      kristaps  517: causes
1.32      kristaps  518: .Sq this
1.22      kristaps  519: and
1.32      kristaps  520: .Sq and
1.55      kristaps  521: to render in bold face, while
1.32      kristaps  522: .Sq word
1.22      kristaps  523: and
1.32      kristaps  524: .Sq that
1.68      kristaps  525: render in italics.
                    526: Whitespace between arguments is omitted in output.
1.44      kristaps  527: .Pp
                    528: Examples:
1.46      kristaps  529: .Pp
1.93      kristaps  530: .Dl \&.BI bold italic bold italic
1.44      kristaps  531: .Pp
                    532: The output of this example will be emboldened
                    533: .Dq bold
                    534: and italicised
                    535: .Dq italic ,
                    536: with spaces stripped between arguments.
                    537: .Pp
                    538: See also
                    539: .Sx \&IB ,
                    540: .Sx \&BR ,
                    541: .Sx \&RB ,
                    542: .Sx \&RI ,
                    543: and
                    544: .Sx \&IR .
1.39      kristaps  545: .Ss \&BR
1.22      kristaps  546: Text is rendered alternately in bold face and roman (the default font).
                    547: Whitespace between arguments is omitted in output.
1.44      kristaps  548: .Pp
                    549: See
                    550: .Sx \&BI
                    551: for an equivalent example.
                    552: .Pp
                    553: See also
                    554: .Sx \&BI ,
                    555: .Sx \&IB ,
                    556: .Sx \&RB ,
                    557: .Sx \&RI ,
                    558: and
                    559: .Sx \&IR .
1.39      kristaps  560: .Ss \&DT
1.68      kristaps  561: Has no effect.
                    562: Included for compatibility.
1.39      kristaps  563: .Ss \&HP
1.23      kristaps  564: Begin a paragraph whose initial output line is left-justified, but
1.27      kristaps  565: subsequent output lines are indented, with the following syntax:
1.44      kristaps  566: .Bd -filled -offset indent
                    567: .Pf \. Sx \&HP
                    568: .Op Cm width
1.32      kristaps  569: .Ed
1.44      kristaps  570: .Pp
                    571: The
                    572: .Cm width
                    573: argument must conform to
                    574: .Sx Scaling Widths .
                    575: If specified, it's saved for later paragraph left-margins; if unspecified, the
                    576: saved or default width is used.
                    577: .Pp
                    578: See also
1.45      kristaps  579: .Sx \&IP ,
                    580: .Sx \&LP ,
                    581: .Sx \&P ,
                    582: .Sx \&PP ,
1.44      kristaps  583: and
1.45      kristaps  584: .Sx \&TP .
1.39      kristaps  585: .Ss \&I
1.22      kristaps  586: Text is rendered in italics.
1.44      kristaps  587: .Pp
                    588: See also
1.92      kristaps  589: .Sx \&B
1.44      kristaps  590: and
1.92      kristaps  591: .Sx \&R .
1.39      kristaps  592: .Ss \&IB
1.80      kristaps  593: Text is rendered alternately in italics and bold face.
                    594: Whitespace between arguments is omitted in output.
1.44      kristaps  595: .Pp
                    596: See
                    597: .Sx \&BI
                    598: for an equivalent example.
                    599: .Pp
                    600: See also
                    601: .Sx \&BI ,
                    602: .Sx \&BR ,
                    603: .Sx \&RB ,
                    604: .Sx \&RI ,
                    605: and
                    606: .Sx \&IR .
1.39      kristaps  607: .Ss \&IP
1.44      kristaps  608: Begin an indented paragraph with the following syntax:
                    609: .Bd -filled -offset indent
                    610: .Pf \. Sx \&IP
                    611: .Op Cm head Op Cm width
1.32      kristaps  612: .Ed
1.44      kristaps  613: .Pp
                    614: The
                    615: .Cm width
                    616: argument defines the width of the left margin and is defined by
1.80      kristaps  617: .Sx Scaling Widths .
1.44      kristaps  618: It's saved for later paragraph left-margins; if unspecified, the saved or
                    619: default width is used.
                    620: .Pp
                    621: The
                    622: .Cm head
1.68      kristaps  623: argument is used as a leading term, flushed to the left margin.
                    624: This is useful for bulleted paragraphs and so on.
1.44      kristaps  625: .Pp
                    626: See also
1.45      kristaps  627: .Sx \&HP ,
                    628: .Sx \&LP ,
                    629: .Sx \&P ,
                    630: .Sx \&PP ,
1.44      kristaps  631: and
1.45      kristaps  632: .Sx \&TP .
1.39      kristaps  633: .Ss \&IR
1.22      kristaps  634: Text is rendered alternately in italics and roman (the default font).
                    635: Whitespace between arguments is omitted in output.
1.44      kristaps  636: .Pp
                    637: See
                    638: .Sx \&BI
                    639: for an equivalent example.
                    640: .Pp
                    641: See also
                    642: .Sx \&BI ,
                    643: .Sx \&IB ,
                    644: .Sx \&BR ,
                    645: .Sx \&RB ,
                    646: and
                    647: .Sx \&RI .
1.39      kristaps  648: .Ss \&LP
1.68      kristaps  649: Begin an undecorated paragraph.
                    650: The scope of a paragraph is closed by a subsequent paragraph,
                    651: sub-section, section, or end of file.
1.78      schwarze  652: The saved paragraph left-margin width is reset to the default.
1.44      kristaps  653: .Pp
                    654: See also
1.45      kristaps  655: .Sx \&HP ,
                    656: .Sx \&IP ,
                    657: .Sx \&P ,
                    658: .Sx \&PP ,
1.44      kristaps  659: and
1.45      kristaps  660: .Sx \&TP .
1.39      kristaps  661: .Ss \&P
                    662: Synonym for
                    663: .Sx \&LP .
1.44      kristaps  664: .Pp
                    665: See also
1.45      kristaps  666: .Sx \&HP ,
                    667: .Sx \&IP ,
                    668: .Sx \&LP ,
                    669: .Sx \&PP ,
1.44      kristaps  670: and
1.45      kristaps  671: .Sx \&TP .
1.39      kristaps  672: .Ss \&PP
                    673: Synonym for
                    674: .Sx \&LP .
1.44      kristaps  675: .Pp
                    676: See also
1.45      kristaps  677: .Sx \&HP ,
                    678: .Sx \&IP ,
                    679: .Sx \&LP ,
                    680: .Sx \&P ,
1.44      kristaps  681: and
1.45      kristaps  682: .Sx \&TP .
1.39      kristaps  683: .Ss \&R
1.22      kristaps  684: Text is rendered in roman (the default font).
1.44      kristaps  685: .Pp
                    686: See also
1.92      kristaps  687: .Sx \&I
1.44      kristaps  688: and
1.92      kristaps  689: .Sx \&B .
1.39      kristaps  690: .Ss \&RB
1.22      kristaps  691: Text is rendered alternately in roman (the default font) and bold face.
                    692: Whitespace between arguments is omitted in output.
1.44      kristaps  693: .Pp
                    694: See
                    695: .Sx \&BI
                    696: for an equivalent example.
                    697: .Pp
                    698: See also
                    699: .Sx \&BI ,
                    700: .Sx \&IB ,
                    701: .Sx \&BR ,
                    702: .Sx \&RI ,
                    703: and
                    704: .Sx \&IR .
1.39      kristaps  705: .Ss \&RE
1.30      kristaps  706: Explicitly close out the scope of a prior
1.39      kristaps  707: .Sx \&RS .
                    708: .Ss \&RI
1.22      kristaps  709: Text is rendered alternately in roman (the default font) and italics.
                    710: Whitespace between arguments is omitted in output.
1.44      kristaps  711: .Pp
                    712: See
                    713: .Sx \&BI
                    714: for an equivalent example.
                    715: .Pp
                    716: See also
                    717: .Sx \&BI ,
                    718: .Sx \&IB ,
                    719: .Sx \&BR ,
                    720: .Sx \&RB ,
                    721: and
                    722: .Sx \&IR .
1.39      kristaps  723: .Ss \&RS
1.68      kristaps  724: Begin a part setting the left margin.
                    725: The left margin controls the offset, following an initial indentation,
                    726: to un-indented text such as that of
1.39      kristaps  727: .Sx \&PP .
1.44      kristaps  728: This has the following syntax:
                    729: .Bd -filled -offset indent
                    730: .Pf \. Sx \&Rs
                    731: .Op Cm width
1.32      kristaps  732: .Ed
1.44      kristaps  733: .Pp
                    734: The
                    735: .Cm width
                    736: argument must conform to
                    737: .Sx Scaling Widths .
1.55      kristaps  738: If not specified, the saved or default width is used.
1.39      kristaps  739: .Ss \&SB
1.22      kristaps  740: Text is rendered in small size (one point smaller than the default font)
                    741: bold face.
1.39      kristaps  742: .Ss \&SH
1.68      kristaps  743: Begin a section.
                    744: The scope of a section is only closed by another section or the end of
                    745: file.
1.78      schwarze  746: The paragraph left-margin width is reset to the default.
1.39      kristaps  747: .Ss \&SM
1.22      kristaps  748: Text is rendered in small size (one point smaller than the default
                    749: font).
1.39      kristaps  750: .Ss \&SS
1.68      kristaps  751: Begin a sub-section.
                    752: The scope of a sub-section is closed by a subsequent sub-section,
                    753: section, or end of file.
1.78      schwarze  754: The paragraph left-margin width is reset to the default.
1.39      kristaps  755: .Ss \&TH
1.22      kristaps  756: Sets the title of the manual page with the following syntax:
1.44      kristaps  757: .Bd -filled -offset indent
                    758: .Pf \. Sx \&TH
                    759: .Cm title section
                    760: .Op Cm date Op Cm source Op Cm volume
                    761: .Ed
1.43      kristaps  762: .Pp
1.78      schwarze  763: At least the upper-case document
1.43      kristaps  764: .Cm title
1.78      schwarze  765: and the manual
1.44      kristaps  766: .Cm section
1.68      kristaps  767: arguments must be provided.
                    768: The
1.43      kristaps  769: .Cm date
                    770: argument should be formatted as described in
1.74      kristaps  771: .Sx Dates ,
                    772: but will be printed verbatim if it is not.
                    773: If the date is not specified, the current date is used.
1.68      kristaps  774: The
1.44      kristaps  775: .Cm source
1.68      kristaps  776: string specifies the organisation providing the utility.
                    777: The
1.44      kristaps  778: .Cm volume
1.43      kristaps  779: string replaces the default rendered volume, which is dictated by the
                    780: manual section.
                    781: .Pp
                    782: Examples:
1.46      kristaps  783: .Pp
1.93      kristaps  784: .Dl \&.TH CVS 5 "1992-02-12" GNU
1.39      kristaps  785: .Ss \&TP
1.25      kristaps  786: Begin a paragraph where the head, if exceeding the indentation width, is
1.24      kristaps  787: followed by a newline; if not, the body follows on the same line after a
1.68      kristaps  788: buffer to the indentation width.
                    789: Subsequent output lines are indented.
1.44      kristaps  790: The syntax is as follows:
                    791: .Bd -filled -offset indent
                    792: .Pf \. Sx \&TP
                    793: .Op Cm width
1.32      kristaps  794: .Ed
                    795: .Pp
1.44      kristaps  796: The
                    797: .Cm width
                    798: argument must conform to
                    799: .Sx Scaling Widths .
                    800: If specified, it's saved for later paragraph left-margins; if
1.27      kristaps  801: unspecified, the saved or default width is used.
1.44      kristaps  802: .Pp
                    803: See also
1.45      kristaps  804: .Sx \&HP ,
                    805: .Sx \&IP ,
                    806: .Sx \&LP ,
                    807: .Sx \&P ,
1.44      kristaps  808: and
1.45      kristaps  809: .Sx \&PP .
1.72      joerg     810: .Ss \&UC
                    811: Sets the volume for the footer for compatibility with man pages from
                    812: BSD releases.
                    813: The optional first argument specifies which release it is from.
1.39      kristaps  814: .Ss \&br
1.68      kristaps  815: Breaks the current line.
                    816: Consecutive invocations have no further effect.
1.44      kristaps  817: .Pp
                    818: See also
                    819: .Sx \&sp .
1.39      kristaps  820: .Ss \&fi
1.22      kristaps  821: End literal mode begun by
1.39      kristaps  822: .Sx \&nf .
1.91      kristaps  823: .Ss \&ft
                    824: Change the current font mode.
                    825: See
                    826: .Sx Text Decoration
                    827: for a listing of available font modes.
1.79      kristaps  828: .Ss \&in
                    829: Indent relative to the current indentation:
                    830: .Pp
                    831: .D1 Pf \. Sx \&in Op Cm width
                    832: .Pp
                    833: If
                    834: .Cm width
                    835: is signed, the new offset is relative.
                    836: Otherwise, it is absolute.
                    837: This value is reset upon the next paragraph, section, or sub-section.
1.39      kristaps  838: .Ss \&na
1.36      kristaps  839: Don't align to the right margin.
1.39      kristaps  840: .Ss \&nf
1.22      kristaps  841: Begin literal mode: all subsequent free-form lines have their end of
1.68      kristaps  842: line boundaries preserved.
                    843: May be ended by
1.39      kristaps  844: .Sx \&fi .
                    845: .Ss \&sp
1.44      kristaps  846: Insert vertical spaces into output with the following syntax:
                    847: .Bd -filled -offset indent
                    848: .Pf \. Sx \&sp
                    849: .Op Cm height
                    850: .Ed
                    851: .Pp
1.55      kristaps  852: Insert
1.44      kristaps  853: .Cm height
                    854: spaces, which must conform to
                    855: .Sx Scaling Widths .
                    856: If 0, this is equivalent to the
1.39      kristaps  857: .Sx \&br
1.68      kristaps  858: macro.
                    859: Defaults to 1, if unspecified.
1.44      kristaps  860: .Pp
                    861: See also
                    862: .Sx \&br .
1.18      kristaps  863: .Sh COMPATIBILITY
1.58      kristaps  864: This section documents areas of questionable portability between
                    865: implementations of the
                    866: .Nm
                    867: language.
1.51      kristaps  868: .Pp
                    869: .Bl -dash -compact
1.77      kristaps  870: .It
1.58      kristaps  871: In quoted literals, GNU troff allowed pair-wise double-quotes to produce
1.68      kristaps  872: a standalone double-quote in formatted output.
                    873: It is not known whether this behaviour is exhibited by other formatters.
1.32      kristaps  874: .It
1.82      kristaps  875: troff suppresses a newline before
                    876: .Sq \(aq
                    877: macro output; in mandoc, it is an alias for the standard
                    878: .Sq \&.
                    879: control character.
                    880: .It
                    881: The
                    882: .Sq \eh
                    883: .Pq horizontal position ,
                    884: .Sq \ev
                    885: .Pq vertical position ,
                    886: .Sq \em
                    887: .Pq text colour ,
                    888: .Sq \eM
                    889: .Pq text filling colour ,
1.83      kristaps  890: .Sq \ez
                    891: .Pq zero-length character ,
1.84      kristaps  892: .Sq \ew
                    893: .Pq string length ,
1.85      kristaps  894: .Sq \ek
                    895: .Pq horizontal position marker ,
1.87      kristaps  896: .Sq \eo
                    897: .Pq text overstrike ,
1.82      kristaps  898: and
                    899: .Sq \es
                    900: .Pq text size
1.84      kristaps  901: escape sequences are all discarded in mandoc.
1.82      kristaps  902: .It
                    903: The
                    904: .Sq \ef
                    905: scaling unit is accepted by mandoc, but rendered as the default unit.
                    906: .It
1.23      kristaps  907: The
1.51      kristaps  908: .Sx \&sp
1.68      kristaps  909: macro does not accept negative values in mandoc.
                    910: In GNU troff, this would result in strange behaviour.
1.32      kristaps  911: .El
1.1       kristaps  912: .Sh SEE ALSO
1.89      schwarze  913: .Xr man 1 ,
1.32      kristaps  914: .Xr mandoc 1 ,
1.89      schwarze  915: .Xr mandoc_char 7 ,
1.94    ! kristaps  916: .Xr mdoc 7 ,
        !           917: .Xr roff 7 ,
        !           918: .Xr tbl 7
1.78      schwarze  919: .Sh HISTORY
                    920: The
                    921: .Nm
                    922: language first appeared as a macro package for the roff typesetting
                    923: system in
                    924: .At v7 .
                    925: It was later rewritten by James Clark as a macro package for groff.
                    926: The stand-alone implementation that is part of the
                    927: .Xr mandoc 1
                    928: utility written by Kristaps Dzonsons appeared in
1.80      kristaps  929: .Ox 4.6 .
1.1       kristaps  930: .Sh AUTHORS
1.78      schwarze  931: This
1.32      kristaps  932: .Nm
1.23      kristaps  933: reference was written by
1.62      kristaps  934: .An Kristaps Dzonsons Aq kristaps@bsd.lv .
1.1       kristaps  935: .Sh CAVEATS
1.68      kristaps  936: Do not use this language.
                    937: Use
1.32      kristaps  938: .Xr mdoc 7 ,
1.1       kristaps  939: instead.

CVSweb