===================================================================
RCS file: /cvs/mandoc/mandoc.1,v
retrieving revision 1.142
retrieving revision 1.155
diff -u -p -r1.142 -r1.155
--- mandoc/mandoc.1	2015/02/04 16:38:56	1.142
+++ mandoc/mandoc.1	2015/02/23 13:31:03	1.155
@@ -1,4 +1,4 @@
-.\"	$Id: mandoc.1,v 1.142 2015/02/04 16:38:56 schwarze Exp $
+.\"	$Id: mandoc.1,v 1.155 2015/02/23 13:31:03 schwarze Exp $
 .\"
 .\" Copyright (c) 2009, 2010, 2011 Kristaps Dzonsons <kristaps@bsd.lv>
 .\" Copyright (c) 2012, 2014, 2015 Ingo Schwarze <schwarze@openbsd.org>
@@ -15,7 +15,7 @@
 .\" ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
 .\" OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
 .\"
-.Dd $Mdocdate: February 4 2015 $
+.Dd $Mdocdate: February 23 2015 $
 .Dt MANDOC 1
 .Os
 .Sh NAME
@@ -23,7 +23,7 @@
 .Nd format and display UNIX manuals
 .Sh SYNOPSIS
 .Nm mandoc
-.Op Fl acfhklV
+.Op Fl acfhkl
 .Sm off
 .Op Fl I Cm os Li = Ar name
 .Sm on
@@ -150,8 +150,6 @@ See
 for available formats.
 Defaults to
 .Fl T Ns Cm locale .
-.It Fl V
-Print version and exit.
 .It Fl W Ns Ar level
 Specify the minimum message
 .Ar level
@@ -729,9 +727,9 @@ macro occurs after some non-prologue macro, but still 
 .Pq mdoc
 The
 .Ic \&Dt
-macro can only occur before the first non-prologue macro
-because traditional formatters write the page header
-before parsing the document body.
+macro appears after the first non-prologue macro.
+Traditional formatters cannot handle this because
+they write the page header before parsing the document body.
 Even though this technical restriction does not apply to
 .Nm ,
 traditional semantics is preserved.
@@ -773,17 +771,27 @@ This may confuse
 .Xr makewhatis 8
 and
 .Xr apropos 1 .
-.It Sy "bad NAME section contents"
+.It Sy "NAME section without name"
 .Pq mdoc
-The last node in the NAME section is not an
+The NAME section does not contain any
+.Ic \&Nm
+child macro.
+.It Sy "NAME section without description"
+.Pq mdoc
+The NAME section lacks the mandatory
 .Ic \&Nd
-macro, or any preceding macro is not
-.Ic \&Nm ,
-or the NAME section is completely empty.
-This may confuse
-.Xr makewhatis 8
+child macro.
+.It Sy "description not at the end of NAME"
+.Pq mdoc
+The NAME section does contain an
+.Ic \&Nd
+child macro, but other content follows it.
+.It Sy "bad NAME section content"
+.Pq mdoc
+The NAME section contains plain text or macros other than
+.Ic \&Nm
 and
-.Xr apropos 1 .
+.Ic \&Nd .
 .It Sy "missing description line, using \(dq\(dq"
 .Pq mdoc
 The
@@ -836,7 +844,7 @@ manual for replacements.
 .Pq mdoc
 The name of a macro that is not callable appears on a macro line.
 It is printed verbatim.
-If the intention is to call it, move it to its own line;
+If the intention is to call it, move it to its own input line;
 otherwise, escape it by prepending
 .Sq \e& .
 .It Sy "skipping paragraph macro"
@@ -995,6 +1003,18 @@ clause.
 .It Sy "skipping empty macro"
 .Pq mdoc
 The indicated macro has no arguments and hence no effect.
+.It Sy "empty block"
+.Pq mdoc , man
+A
+.Ic \&Bd ,
+.Ic \&Bk ,
+.Ic \&Bl ,
+.Ic \&D1 ,
+.Ic \&Dl ,
+.Ic \&RS ,
+or
+.Ic \&UR
+block contains nothing in its body and will produce no output.
 .It Sy "empty argument, using 0n"
 .Pq mdoc
 The required width is missing after
@@ -1004,12 +1024,6 @@ or
 .Fl offset
 or
 .Fl width.
-.It Sy "argument count wrong"
-.Pq mdoc , man
-The indicated macro has too few or too many arguments.
-The syntax tree will contain the wrong number of arguments as given.
-Formatting behaviour depends on the specific macro in question.
-Note that the same message may also occur as an ERROR, see below.
 .It Sy "missing display type, using -ragged"
 .Pq mdoc
 The
@@ -1041,6 +1055,12 @@ The
 macro is called without an argument before
 .Ic \&Nm
 has first been called with an argument.
+.It Sy "missing function name, using \(dq\(dq"
+.Pq mdoc
+The
+.Ic \&Fo
+macro is called without an argument.
+No function name is printed.
 .It Sy "empty head in list item"
 .Pq mdoc
 In a
@@ -1068,21 +1088,18 @@ list, an
 .Ic \&It
 block is empty.
 An empty list item is shown.
-.It Sy "missing font type"
+.It Sy "missing font type, using \efR"
 .Pq mdoc
 A
 .Ic \&Bf
 macro has no argument.
-It switches to the default font,
-.Cm \efR .
-.It Sy "unknown font type"
+It switches to the default font.
+.It Sy "unknown font type, using \efR"
 .Pq mdoc
 The
 .Ic \&Bf
 argument is invalid.
-The default font
-.Cm \efR
-is used instead.
+The default font is used instead.
 .It Sy "nothing follows prefix"
 .Pq mdoc
 A
@@ -1091,6 +1108,14 @@ macro has no argument, or only one argument and no mac
 on the same input line.
 This defeats its purpose; in particular, spacing is not suppressed
 before the text or macros following on the next input line.
+.It Sy "empty reference block"
+.Pq mdoc
+An
+.Ic \&Rs
+macro is immediately followed by an
+.Ic \&Re
+macro on the next input line.
+Such an empty block does not produce any output.
 .It Sy "missing -std argument, adding it"
 .Pq mdoc
 An
@@ -1105,6 +1130,18 @@ The
 utility assumes
 .Fl std
 even when it is not specified, but other implementations may not.
+.It Sy "missing option string, using \(dq\(dq"
+.Pq man
+The
+.Ic \&OP
+macro is invoked without any argument.
+An empty pair of square brackets is shown.
+.It Sy "missing resource identifier, using \(dq\(dq"
+.Pq man
+The
+.Ic \&UR
+macro is invoked without any argument.
+An empty pair of angle brackets is shown.
 .It Sy "missing eqn box, using \(dq\(dq"
 .Pq eqn
 A diacritic mark or a binary operator is found,
@@ -1169,6 +1206,15 @@ list has a
 .Fl width
 argument.
 That has no effect.
+.It Sy "wrong number of cells"
+In a line of a
+.Ic \&Bl Fl column
+list, the number of tabs or
+.Ic \&Ta
+macros is less than the number expected from the list header line
+or exceeds the expected number by more than one.
+Missing cells remain empty, and all cells exceeding the number of
+columns are joined into one single cell.
 .It Sy "unknown AT&T UNIX version"
 .Pq mdoc
 An
@@ -1220,6 +1266,12 @@ request or a
 layout modifier has an unknown
 .Ar font
 argument.
+.It Sy "odd number of characters in request"
+.Pq roff
+A
+.Ic \&tr
+request contains an odd number of characters.
+The last character is mapped to the blank character.
 .El
 .Ss "Warnings related to plain text"
 .Bl -ohang
@@ -1456,7 +1508,7 @@ macros as well as tables require explicit closing by d
 A block that doesn't support bad nesting
 ends before all of its children are properly closed.
 The open child nodes are closed implicitly.
-.It Sy "scope open on exit"
+.It Sy "appending missing end of block"
 .Pq mdoc , man , eqn , tbl , roff
 At the end of the document, an explicit
 .Xr mdoc 7
@@ -1506,12 +1558,6 @@ When parsing for a request or a user-defined macro nam
 only the escape sequence is discarded.
 The characters preceding it are used as the request or macro name,
 the characters following it are used as the arguments to the request or macro.
-.It Sy "argument count wrong"
-.Pq mdoc , man , roff
-The indicated request or macro has too few or too many arguments.
-The syntax tree will contain the wrong number of arguments as given.
-Formatting behaviour depends on the specific request or macro in question.
-Note that the same message may also occur as a WARNING, see above.
 .It Sy "NOT IMPLEMENTED: Bd -file"
 .Pq mdoc
 For security reasons, the
@@ -1594,7 +1640,10 @@ An
 .Ic \&Ef ,
 .Ic \&Ek ,
 .Ic \&El ,
+.Ic \&Lp ,
+.Ic \&Pp ,
 .Ic \&Re ,
+.Ic \&Rs ,
 or
 .Ic \&Ud
 macro, an
@@ -1612,19 +1661,54 @@ or
 .Ic \&EN
 macro, or a
 .Xr roff 7
+.Ic \&br ,
+.Ic \&fi ,
+or
+.Ic \&nf
+request or
 .Sq \&..
 block closing request is invoked with at least one argument.
 All arguments are ignored.
 .It Sy "skipping excess arguments"
 .Pq mdoc , man , roff
-The
-.Ic \&Bf
-macro is invoked with more than one argument, the
+A macro or request is invoked with too many arguments:
+.Bl -dash -offset 2n -width 2n -compact
+.It
+.Ic \&Fo ,
+.Ic \&PD ,
+.Ic \&RS ,
+.Ic \&UR ,
+.Ic \&ft ,
+or
+.Ic \&sp
+with more than one argument
+.It
+.Ic \&An
+with another argument after
+.Fl split
+or
+.Fl nosplit
+.It
 .Ic \&RE
-macro is invoked with more than one argument
-or with a non-integer argument, or a request of the
+with more than one argument or with a non-integer argument
+.It
+.Ic \&OP
+or a request of the
 .Ic \&de
-family is invoked with more than two arguments.
+family with more than two arguments
+.It
+.Ic \&Dt
+with more than three arguments
+.It
+.Ic \&TH
+with more than five arguments
+.It
+.Ic \&Bd ,
+.Ic \&Bk ,
+or
+.Ic \&Bl
+with invalid arguments
+.El
 The excess arguments are ignored.
 .El
 .Ss Unsupported features