=================================================================== RCS file: /cvs/mandoc/tbl.7,v retrieving revision 1.27 retrieving revision 1.28 diff -u -p -r1.27 -r1.28 --- mandoc/tbl.7 2017/06/08 18:11:22 1.27 +++ mandoc/tbl.7 2017/06/28 00:59:57 1.28 @@ -1,4 +1,4 @@ -.\" $Id: tbl.7,v 1.27 2017/06/08 18:11:22 schwarze Exp $ +.\" $Id: tbl.7,v 1.28 2017/06/28 00:59:57 schwarze Exp $ .\" .\" Copyright (c) 2010, 2011 Kristaps Dzonsons .\" Copyright (c) 2014, 2015, 2017 Ingo Schwarze @@ -15,7 +15,7 @@ .\" ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF .\" OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. .\" -.Dd $Mdocdate: June 8 2017 $ +.Dd $Mdocdate: June 28 2017 $ .Dt TBL 7 .Os .Sh NAME @@ -24,128 +24,43 @@ .Sh DESCRIPTION The .Nm tbl -language is a table-formatting language. +language formats tables. It is used within .Xr mdoc 7 and .Xr man 7 -.Ux -manual pages. +pages. This manual describes the subset of the .Nm language accepted by the .Xr mandoc 1 utility. .Pp -Tables within -.Xr mdoc 7 -or -.Xr man 7 -are enclosed by the -.Sq TS -and -.Sq TE -macro tags, whose precise syntax is documented in -.Xr roff 7 . -Tables consist of a series of options on a single line, followed by the -table layout, followed by data. -.Pp -For example, the following creates a boxed table with digits centered in -the cells. -.Bd -literal -offset indent -\&.TS -tab(:) box; -c5 c5 c5. -1:2:3 -4:5:6 -\&.TE -.Ed -.Pp -When formatted, the following output is produced: -.Bd -filled -offset indent -compact -.TS -tab(:) box; -c5 c5 c5. -1:2:3 -4:5:6 -.TE -.Ed -.Sh TABLE STRUCTURE -Tables are enclosed by the -.Sq TS -and -.Sq TE +Each table is started with a .Xr roff 7 -macros. -A table consists of an optional single line of table -.Sx Options -terminated by a semicolon, followed by one or more lines of +.Ic \&TS +macro, consist of at most one line of +.Sx Options , +one or more .Sx Layout -specifications terminated by a period, then -.Sx Data . +lines, one or more +.Sx Data +lines, and ends with a +.Ic \&TE +macro. All input must be 7-bit ASCII. -Example: -.Bd -literal -offset indent -\&.TS -box tab(:); -c | c -| c | c. -1:2 -3:4 -\&.TE -.Ed -.Pp -Table data is -.Em pre-processed , -that is, data rows are parsed then inserted into the underlying stream -of input data. -This allows data rows to be interspersed by arbitrary -.Xr roff 7 , -.Xr mdoc 7 , -and -.Xr man 7 -macros such as -.Bd -literal -offset indent -\&.TS -tab(:); -c c c. -1:2:3 -\&.Ao -3:2:1 -\&.Ac -\&.TE -.Ed -.Pp -in the case of -.Xr mdoc 7 -or -.Bd -literal -offset indent -\&.TS -tab(:); -c c c. -\&.ds ab 2 -1:\e*(ab:3 -\&.I -3:2:1 -\&.TE -.Ed -.Pp -in the case of -.Xr man 7 . .Ss Options -The first line of a table may contain options separated by spaces, tabs, -or commas and terminated by a semicolon. -If the first line does not have a terminating semicolon, it is assumed -that no options are specified and instead a +If the first input line of a table ends with a semicolon, it contains +case-insensitive options separated by spaces, tabs, or commas. +Otherwise, it is interpreted as the first .Sx Layout -is processed. -Some options require arguments enclosed by parentheses. -The following case-insensitive options are available: +line. +.Pp +The following options are available. +Some of them require arguments enclosed in parentheses: .Bl -tag -width Ds .It Cm allbox Draw a single-line box around each table cell. -Currently treated as a synonym for -.Cm box . .It Cm box Draw a single-line box around the table. For GNU compatibility, this may also be invoked with @@ -185,73 +100,77 @@ Suppress warnings about tables exceeding the current l This is a GNU extension and currently ignored. .It Cm tab Use the single-character argument as a delimiter between data cells. -By default, the tab character is used. +By default, the horizontal tabulator character is used. .El .Ss Layout -The table layout follows +The table layout follows an .Sx Options -or a -.Sq \&T& -macro invocation. -Layout specifies how data rows are displayed on output. -Each layout line corresponds to a line of data; the last layout line -applies to all remaining data lines. -Layout lines may also be separated by a comma. -Each layout cell consists of one of the following case-insensitive keys: +line or a +.Xr roff 7 +.Ic \&TS +or +.Ic \&T& +macro. +Each layout line specifies how one line of +.Sx Data +is formatted. +The last layout line ends with a full stop. +It also applies to all remaining data lines. +Multiple layout lines can be joined by commas on a single physical +input line. +.Pp +Each layout line consists of one or more layout cell specifications, +optionally separated by whitespace. +The following case-insensitive key characters start a new cell +specification: .Bl -tag -width 2n .It Cm c -Center a literal string within its column. +Center the string in this cell. .It Cm r -Right-justify a literal string within its column. +Right-justify the string in this cell. .It Cm l -Left-justify a literal string within its column. +Left-justify the string in this cell. .It Cm n Justify a number around its last decimal point. -If the decimal point is not found on the number, it's assumed to trail -the number. +If no decimal point is found in the number, +it is assumed to trail the number. .It Cm s Horizontally span columns from the last -.No non- Ns Cm s -data cell. -It is an error if spanning columns follow a -.Cm \- +.Pf non- Cm s +layout cell. +It is an error if a column span follows a +.Cm _ or -.Cm \(ba -cell, or come first. -This option is not supported by -.Xr mandoc 1 . +.Cm = +cell, or comes first on a layout line. +The combined cell as a whole consumes only one cell +of the corresponding data line. .It Cm a -Left-justify a literal string and pad with one space. +Left-justify a string and pad with one space. .It Cm ^ Vertically span rows from the last -.No non- Ns Cm ^ -data cell. -It is an error to invoke a vertical span on the first layout row. -Unlike a horizontal spanner, you must specify an empty cell (if it not -empty, the data is discarded) in the corresponding data cell. -.It Cm \- -Replace the data cell (its contents will be lost) with a single -horizontal line. -This may also be invoked with -.Cm _ . +.Pf non- Cm ^ +layout cell. +It is an error to invoke a vertical span on the first layout line. +Unlike a horizontal span, a vertical span consumes a data cell +and discards the content. +.It Cm _ +Draw a single horizontal line in this cell. +This consumes a data cell and discards the content. +It may also be invoked with +.Cm \- . .It Cm = -Replace the data cell (its contents will be lost) with a double -horizontal line. -.It Cm \(ba -Emit a vertical bar instead of data. -.It Cm \(ba\(ba -Emit a double-vertical bar instead of data. +Draw a double horizontal line in this cell. +This consumes a data cell and discards the content. .El .Pp -Keys may be followed by a set of modifiers. -A modifier is either a modifier key or a natural number for specifying -the spacing to the right of the column. -The following case-insensitive modifier keys are available: +Each cell key may be followed by zero or more of the following +case-insensitive modifiers: .Bl -tag -width 2n .It Cm b -Use a bold font for the contents of this column. +Use a bold font for the contents of this cell. .It Cm d -Move cell content down to the last cell of a vertical span. +Move content down to the last row of this vertical span. Currently ignored. .It Cm e Make this column wider to match the maximum width @@ -259,12 +178,12 @@ of any other column also having the .Cm e modifier. .It Cm f -The next character selects the font to use for this column. +The next character selects the font to use for this cell. See the .Xr roff 7 manual for supported one-character font names. .It Cm i -Use an italic font for the contents of this column. +Use an italic font for the contents of this cell. .It Cm m Specify a cell start macro. This is a GNU extension and currently unsupported. @@ -277,14 +196,14 @@ Set the vertical line spacing to the following unsigne or change it by the following signed argument. Currently ignored. .It Cm t -Do not vertically center cell content in the vertical span, -leave it at the top. +Do not vertically center content in this vertical span, +leave it in the top row. Currently ignored. .It Cm u -Move cell content up by half a table line. +Move cell content up by half a table row. Currently ignored. .It Cm w -Specify the minimum column width. +Specify a minimum column width. .It Cm x After determining the width of all other columns, distribute the rest of the line length among all columns having the @@ -292,40 +211,185 @@ rest of the line length among all columns having the modifier. .It Cm z Do not use this cell for determining the width of this column. +.It Cm \&| +Draw a single vertical line to the right of this cell. +.It Cm || +Draw a double vertical line to the right of this cell. .El .Pp -For example, the following layout specifies a center-justified column of -minimum width 10, followed by vertical bar, followed by a left-justified -column of minimum width 10, another vertical bar, then a column using -bold font justified about the decimal point in numbers: -.Pp -.Dl cw10 | lw10 | nfB +If a modifier consists of decimal digits, +it specifies a minimum spacing in units of +.Cm n +between this column and the next column to the right. +The default is 3. +If there is a vertical line, it is drawn inside the spacing. .Ss Data -The data section follows the last layout row. -By default, cells in a data section are delimited by a tab. -This behaviour may be changed with the +The data section follows the last +.Sx Layout +line. +Each data line consists of one or more data cells, delimited by .Cm tab -option. -If -.Cm _ +characters. +.Pp +If a data cells contains only the single character +.Ql _ or -.Cm = -is specified, a single or double line, respectively, is drawn across the -data field. -If -.Cm \e- +.Ql = , +a single or double horizontal line is drawn across the cell, +joining its neighbours. +If a data cells contains only the two character sequence +.Ql \e_ or -.Cm \e= -is specified, a line is drawn within the data field (i.e. terminating -within the cell and not draw to the border). -If the last cell of a line is -.Cm T{ , -all subsequent lines are included as part of the cell until -.Cm T} -is specified as its own data cell. -It may then be followed by a tab -.Pq or as designated by Cm tab -or an end-of-line to terminate the row. +.Ql \e= , +a single or double horizontal line is drawn inside the cell, +not joining its neighbours. +If a data line contains nothing but the single character +.Ql _ +or +.Ql = , +a horizontal line across the whole table is inserted +without consuming a layout row. +.Pp +In place of any data cell, a text block can be used. +It starts with +.Ic \&T{ +at the end of a physical input line. +Input line breaks inside the text block +neither end the text block nor its data cell. +It only ends if +.Ic \&T} +occurs at the beginning of a physical input line and is followed +by an end-of-cell indicator. +If the +.Ic \&T} +is followed by the end of the physical input line, the text block, +the data cell, and the data line ends at this point. +If the +.Ic \&T} +is followed by the +.Cm tab +character, only the text block and the data cell end, +but the data line continues with the data cell following the +.Cm tab +character. +If +.Ic \&T} +is followed by any other character, it does not end the text block, +which instead continues to the following physical input line. +.Sh EXAMPLES +String justification and font selection: +.Bd -literal -offset indent +\&.TS +rb c lb +r ci l. +r center l +ri ce le +right c left +\&.TE +.Ed +.Bd -filled -offset indent +.TS +rb c lb +r ci l. +r center l +ri ce le +right c left +.TE +.Ed +.Pp +Some ports in +.Ox 6.1 +to show number alignment and line drawing: +.Bd -literal -offset indent +\&.TS +box tab(:); +r| l +r n. +software:version +_ +AFL:2.39b +Mutt:1.8.0 +Ruby:1.8.7.374 +TeX Live:2015 +\&.TE +.Ed +.Bd -filled -offset indent +.TS +box tab(:); +r| l +r n. +software:version +_ +AFL:2.39b +Mutt:1.8.0 +Ruby:1.8.7.374 +TeX Live:2015 +.TE +.Ed +.sp 2v +Spans and skipping width calculations: +.Bd -literal -offset indent +\&.TS +box tab(:); +lz s | rt +lt| cb| ^ +^ | rz s. +left:r +l:center: +:right +\&.TE +.Ed +.Bd -filled -offset indent +.TS +box tab(:); +lz s | rt +lt| cb| ^ +^ | rz s. +left:r +l:center: +:right +.TE +.Ed +.sp 2v +Text blocks, specifying spacings and specifying and equalizing +column widths, putting lines into individual cells, and overriding +.Cm allbox : +.Bd -literal -offset indent +\&.TS +allbox tab(:); +le le||7 lw10. +The fourth line:_:line 1 +of this column:=:line 2 +determines:\_:line 3 +the column width.:T{ +This text is too wide to fit into a column of width 17. +T}:line 4 +T{ +No break here. +T}::line 5 +\&.TE +.Ed +.Bd -filled -offset indent +.TS +allbox tab(:); +le le||7 lw10. +The fourth line:_:line 1 +of this column:=:line 2 +determines:\_:line 3 +the column width.:T{ +This text is too wide to fit into a column of width 17. +T}:line 4 +T{ +No break here. +T}::line 5 +.TE +.Ed +.sp 2v +These examples were constructed to demonstrate many +.Nm +features in a compact way. +In real manual pages, keep tables as simple as possible: +Like that, they usually look better, are less fragile, and more portable. .Sh COMPATIBILITY The .Xr mandoc 1 @@ -363,4 +427,6 @@ utility. This .Nm reference was written by -.An Kristaps Dzonsons Aq Mt kristaps@bsd.lv . +.An Kristaps Dzonsons Aq Mt kristaps@bsd.lv +and +.An Ingo Schwarze Aq Mt schwarze@openbsd.org .