[BACK]Return to cvsweb.conf CVS log [TXT][DIR] Up to [cvsweb.bsd.lv] / cvsweb

Diff for /cvsweb/Attic/cvsweb.conf between version 4.5 and 4.18

version 4.5, 2019/11/11 13:15:09 version 4.18, 2019/11/29 14:29:48
Line 16 
Line 16 
 # when no value for them has been explicitly set.  # when no value for them has been explicitly set.
 #  #
   
 # Set the path for the following commands:  
 #   cvs, rlog, rcsdiff  
 #   gzip (if you enable $allow_compress)  
 #   (g)tar, zip (if you enable $allow_tar)  
 #   cvsgraph (if you enable $allow_graph)  
 #   enscript (if you enable $allow_enscript)  
 #  
 @command_path = qw(/bin /usr/bin /usr/local/bin);  
   
 # Search the above directories for each command (prefer gtar over tar).  
 #  
 for (qw(cvs rlog rcsdiff gzip gtar zip cvsgraph enscript)) {  
         $CMD{$_} = search_path($_);  
 }  
 $CMD{tar}   = delete($CMD{gtar}) if $CMD{gtar};  
 $CMD{tar} ||= search_path('tar');  
   
 # CVS roots  # CVS roots
 #  #
 # CVSweb can handle several CVS repositories at once.  Enter short (internal)  # CVSweb can handle several CVS repositories at once.  Enter short (internal)
Line 59  $CMD{tar} ||= search_path('tar');
Line 42  $CMD{tar} ||= search_path('tar');
         'local'   => ['Local Repository', '/cvs'],          'local'   => ['Local Repository', '/cvs'],
 );  );
   
 # The default CVS root.  Note that @CVSrepositories is list, not a hash,  
 # so you'll want to use 2 * 0-based-index-number here; or set this directly  
 # to the default's symbolic name. Unless specified, the first valid one in  
 # @CVSrepositories is used as the default.  
 #  
 # For example:  
 #  
 #$cvstreedefault = $CVSrepositories[2 * 0];  
 #$cvstreedefault = 'local';  
   
 # Mirror sites.  The keys will be used as link texts, and the values are  
 # URLs pointing to the corresponding mirrors.  
 #  
 #%MIRRORS = (  
 #     'Other location'  => 'http://192.168.0.1/cgi-bin/cvsweb.cgi/',  
 #     'Yet another one' => 'http://192.168.0.2/cgi-bin/cvsweb.cgi/',  
 #);  
   
 # Bug tracking system linking options ("PR" means Problem Report, as in GNATS)  
 # This will be done only for views for which $allow_*_extra below is true.  
 #  
 #@prcategories = qw(  
 #    advocacy  
 #    alpha  
 #    bin  
 #    conf  
 #    docs  
 #    gnu  
 #    i386  
 #    kern  
 #    misc  
 #    pending  
 #    ports  
 #    sparc  
 #);  
 #$prcgi = "http://www.FreeBSD.org/cgi/query-pr.cgi?pr=%s";  
 #$prkeyword = "PR";  
   
 # Manual gateway linking.  This will be done only for views for which  # Manual gateway linking.  This will be done only for views for which
 # $allow_*_extra below is true.  # $allow_*_extra below is true.
 #  #
Line 135  $mancgi =
Line 80  $mancgi =
     #   h      Human readable      #   h      Human readable
     #   u      Unified diff      #   u      Unified diff
     #   c      Context diff      #   c      Context diff
     #   uc     Unified diff, enscript colored (falls back to "u" w/o enscript)  
     #   cc     Context diff, enscript colored (falls back to "c" w/o enscript)  
     "f" => "u",      "f" => "u",
   
     # hidecvsroot: Don't show the CVSROOT directory.  Note that this is      # hidecvsroot: Don't show the CVSROOT directory.  Note that this is
Line 222  my $iconsdir = '/icons';
Line 165  my $iconsdir = '/icons';
      dir     => [('[DIR]',    "$iconsdir/dir.gif",       20,   22)],       dir     => [('[DIR]',    "$iconsdir/dir.gif",       20,   22)],
      file    => [('[TXT]',    "$iconsdir/text.gif",      20,   22)],       file    => [('[TXT]',    "$iconsdir/text.gif",      20,   22)],
      binfile => [('[BIN]',    "$iconsdir/binary.gif",    20,   22)],       binfile => [('[BIN]',    "$iconsdir/binary.gif",    20,   22)],
      graph   => [('[GRAPH]',  "$iconsdir/minigraph.png", 16,   16)],  
 );  );
 undef $iconsdir;  undef $iconsdir;
   
Line 388  $allow_markup = 1;
Line 330  $allow_markup = 1;
 #  #
 #$allow_mailtos = 0;  #$allow_mailtos = 0;
   
 ## Extra hyperlinking means hyperlinks to bug tracking systems and manual page  ## Extra hyperlinking means hyperlinks to manual page
 ## gateways, see $prcgi and $mancgi and related options above.  ## gateways, see $mancgi above.
   
 # Allow extra hyperlinking (such as PR cross-references) in logs?  # Allow extra hyperlinking (such as PR cross-references) in logs?
 # Default: yes.  # Default: yes.
Line 409  $allow_source_extra = 1;
Line 351  $allow_source_extra = 1;
 #  #
 #$allow_compress = 1;  #$allow_compress = 1;
   
 # Use JavaScript in the UI?  
 #  
 $use_java_script = 1;  
   
 # Show a form for setting options in the directory view?  # Show a form for setting options in the directory view?
 #  #
 $edit_option_form = 1;  $edit_option_form = 1;
Line 438  $show_log_in_markup = 1;
Line 376  $show_log_in_markup = 1;
 # multibyte character. (such as iso-2022-jp, ShiftJIS, etc.)  # multibyte character. (such as iso-2022-jp, ShiftJIS, etc.)
 # Otherwise those files will get screwed up in markup.  # Otherwise those files will get screwed up in markup.
 #  #
 # Note: enscript(1) highlighting is preferred over the built-in preformatting,  
 # ie. this has no effect if $allow_enscript is true and enscript can highlight  
 # the file.  
 #  
 #$preformat_in_markup = 1;  #$preformat_in_markup = 1;
   
 # Default tab width used to expand tabs to spaces in various HTMLized views.  # Default tab width used to expand tabs to spaces in various HTMLized views.
Line 451  $show_log_in_markup = 1;
Line 385  $show_log_in_markup = 1;
 #  #
 #$tabstop = 4;  #$tabstop = 4;
   
 # If you wish to display absolute times in your local timezone,  
 # then define @mytz and fill in the strings for your standard and  
 # daylight time. Note that you must also make sure the system  
 # timezone is correctly set.  
 #  
 #@mytz=("EST", "EDT");  
   
 # CVSweb is friendly to caches by sending the HTTP Last-Modified  # CVSweb is friendly to caches by sending the HTTP Last-Modified
 # header corresponding to the sent content.  In the case of a  # header corresponding to the sent content.  In the case of a
 # checkout, this may require running rcslog on the file solely for the  # checkout, this may require running rcslog on the file solely for the
Line 467  $show_log_in_markup = 1;
Line 394  $show_log_in_markup = 1;
 $use_moddate = 1;  $use_moddate = 1;
   
 # Maximum number of filenames to pass to rlog(1) in one command.  # Maximum number of filenames to pass to rlog(1) in one command.
 # If you see "Failed to spawn GNU rlog" errors with directories containing  # If you see "Failed to spawn rlog" errors with directories containing
 # lots of files, experiment by setting this to different values and see if  # lots of files, experiment by setting this to different values and see if
 # the error still occurs.  A good value to start from would be eg. 200.  # the error still occurs.  A good value to start from would be eg. 200.
 # Just comment this out if you're not bitten by the problem.  # Just comment this out if you're not bitten by the problem.
 #  #
 #$file_list_len = 200;  #$file_list_len = 200;
   
 # Allow graphical representations of file revisions and branches with CvsGraph?  # Whether to allow downloading a tarball of the current directory.
 #  
 $allow_cvsgraph = $CMD{cvsgraph} ? 1 : 0;  
   
 # Path to the CvsGraph configuration file.  Only used if $allow_cvsgraph  
 # is true.  Leave this empty or comment it out to make cvsgraph(1) use its  
 # default configuration file.  Note that CVSweb will override some of the  
 # settings in the configuration file with command line options, see  
 # doGraph() and doGraphView() in cvsweb.cgi for details.  
 #  
 #$cvsgraph_config = "/etc/cvsgraph.conf";  
   
 # URL to the CVSHistory script.  This should be absolute (but does not need  
 # to include the host and port if the script is on the same server as  
 # CVSweb).  
 #$cvshistory_url = "/cgi-bin/cvshistory.cgi";  
   
 # Whether to allow downloading a tarball or a zip of the current directory.  
 # While downloading of the entire repository is disallowed, depending on  # While downloading of the entire repository is disallowed, depending on
 # the directory this may take a lot of time and disk space.  For some CVS  # the directory this may take a lot of time and disk space.  For some CVS
 # versions, the user account running CVSweb needs write access to  # versions, the user account running CVSweb needs write access to
 # CVSROOT/val-tags.  See also the tar, gzip and zip options below.  # CVSROOT/val-tags.  See also the tar options below.
 #  #
 #$allow_tar = (($CMD{tar} && $CMD{gzip}) || $CMD{zip}) ? 1 : 0;  $allow_tar = 0;
   
 # Options to pass to tar(1).  # Options to pass to tar(1).
 # For example: @tar_options = qw(--ignore-failed-read);  # For example: @tar_options = qw(--ignore-failed-read);
Line 507  $allow_cvsgraph = $CMD{cvsgraph} ? 1 : 0;
Line 417  $allow_cvsgraph = $CMD{cvsgraph} ? 1 : 0;
 #  #
 @tar_options = qw();  @tar_options = qw();
   
 # Options to pass to gzip(1) when compressing a tarball to download.  
 # For example: @gzip_options = qw(-3);  
 # Try lower compression level than 6 (default) if you want faster  
 # compression, or higher for better compression.  
 #  
 @gzip_options = qw();  
   
 # Options to pass to zip(1) when compressing a zip archive to download.  
 # For example: @zip_options = qw(-3);  
 # Try lower compression level than 6 (default) if you want faster  
 # compression, or higher for better compression.  
 #  
 @zip_options = qw(-q);  
   
 # Options to pass to cvs(1).  # Options to pass to cvs(1).
 # For cvs versions 1.11 to 1.11.6 (broken in < 1.11, removed in 1.11.7), you  # For cvs versions 1.11 to 1.11.6 (broken in < 1.11, removed in 1.11.7), you
 # can use the '-l' option to prevent cvs from writing to the history file.  # can use the '-l' option to prevent cvs from writing to the history file.
Line 550  $ENV{CVSREADONLYFS} = 1 unless exists($ENV{CVSREADONLY
Line 446  $ENV{CVSREADONLYFS} = 1 unless exists($ENV{CVSREADONLY
 #  #
 @rcsdiff_options = qw(-q);  @rcsdiff_options = qw(-q);
   
 # Enables syntax highlighting using GNU Enscript if set.  
 # You will need GNU Enscript version 1.6.3 or newer for this to work.  
 #  
 #$allow_enscript = $CMD{enscript} ? 1 : 0;  
   
 # Options to pass to enscript(1).  
 # Do not set the -q, --language, -o or --highlight options here.  
 # Most useful styles are probably emacs, emacs_verbose and msvc.  
 #  
 @enscript_options = qw(--style=emacs --color=1);  
   
 # Enscript highlight rule to filename regex mappings.  The set of useful  
 # mappings depends on what highlight rules the system has installed.  
 #  
 %enscript_types =  
   (  
    'ada'          => qr/\.ad(s|b|a)$/o,  
    'asm'          => qr/\.[Ss]$/o,  
    'awk'          => qr/\.awk$/o,  
    'bash'         => qr/\.(bash(_profile|rc)|inputrc)$/o,  
    'c'            => qr/\.(c|h)$/o,  
    'changelog'    => qr/^changelog$/io,  
    'cpp'          => qr/\.(c\+\+|C|H|cpp|cc|cxx)$/o,  
    'csh'          => qr/\.(csh(rc)?|log(in|out)|history)$/o,  
    'elisp'        => qr/\.e(l|macs)$/o,  
    'fortran'      => qr/\.[fF]$/o,  
    'haskell'      => qr/\.(l?h|l?g)s$/o,  
    'html'         => qr/\.x?html?$/o,  
    'idl'          => qr/\.idl$/o,  
    'inf'          => qr/\.inf$/io,  
    'java'         => qr/\.java$/o,  
    'javascript'   => qr/\.(js|pac)$/o,  
    'ksh'          => qr/\.ksh$/o,  
    'm4'           => qr/\.m4$/o,  
    'makefile'     => qr/(GNU)?[Mm]akefile(?!\.PL\b)|\.(ma?ke?|am)$/o,  
    'matlab'       => qr/\.m$/o,  
    'nroff'        => qr/\.man$/o,  
    'pascal'       => qr/\.p(as|p)?$/io,  
    'perl'         => qr/\.p(m|(er)?l)$/io,  
    'postscript'   => qr/\.e?ps$/io,  
    'python'       => qr/\.py$/o,  
    'rfc'          => qr/\b((rfc|draft)\..*\.txt)$/o,  
    'scheme'       => qr/\.(scm|scheme)$/o,  
    'sh'           => qr/\.sh$/o,  
    'skill'        => qr/\.il$/o,  
    'sql'          => qr/\.sql$/o,  
    'states'       => qr/\.st$/o,  
    'synopsys'     => qr/\.s(cr|yn(th)?)$/o,  
    'tcl'          => qr/\.tcl$/o,  
    'tcsh'         => qr/\.tcshrc$/o,  
    'tex'          => qr/\.tex$/o,  
    'vba'          => qr/\.vba$/o,  
    'verilog'      => qr/\.(v|vh)$/o,  
    'vhdl'         => qr/\.vhdl?$/o,  
    'vrml'         => qr/\.wrl$/o,  
    'wmlscript'    => qr/\.wmls(cript)?$/o,  
    'zsh'          => qr/\.(zsh(env|rc)|z(profile|log(in|out)))$/o,  
   );  
   
 # Troubleshooting: in case of problems, setting this to 1 will cause more  # Troubleshooting: in case of problems, setting this to 1 will cause more
 # error output into your web server error log.  Under normal operation,  # error output into your web server error log.  Under normal operation,
 # this should be set to 0 or commented out.  # this should be set to 0 or commented out.
 #  #
 #$DEBUG = 1;  #$DEBUG = 1;
   
 # Enable this to let CVSweb load extra configuration files from the "conf.d"  
 # subdirectory of the directory this file is located in.  This enables site  
 # specific configuration without having to modify this "master" configuration  
 # file (except for enabling this functionality below :)  
 #  
 if (0) {  
   my $confdir = catdir(dirname(__FILE__), 'conf.d');  
   if (opendir(CONFD, $confdir)) {  
     my @files = sort(map(catfile($confdir, $_), readdir(CONFD)));  
     close(CONFD);  
     for my $conffile (grep(-f && -r _, @files)) {  
       ($conffile) = ($conffile =~ /(.+\.conf)$/) or next;  
       do "$conffile" or config_error($conffile, $@);  
     }  
   }  
 }  
   
 1;  1;
   
Legend:
Removed from v.4.5  
changed lines
  Added in v.4.18
CVSweb