[BACK]Return to cvsweb.conf CVS log [TXT][DIR] Up to [cvsweb.bsd.lv] / cvsweb

Diff for /cvsweb/Attic/cvsweb.conf between version 4.3 and 4.17

version 4.3, 2019/11/10 14:05:18 version 4.17, 2019/11/29 13:39:50
Line 16 
Line 16 
 # when no value for them has been explicitly set.  # when no value for them has been explicitly set.
 #  #
   
 # Set the path for the following commands:  
 #   cvs, rlog, rcsdiff  
 #   gzip (if you enable $allow_compress)  
 #   (g)tar, zip (if you enable $allow_tar)  
 #   cvsgraph (if you enable $allow_graph)  
 #   enscript (if you enable $allow_enscript)  
 #  
 @command_path = qw(/bin /usr/bin /usr/local/bin);  
   
 # Search the above directories for each command (prefer gtar over tar).  
 #  
 for (qw(cvs rlog rcsdiff gzip gtar zip cvsgraph enscript)) {  
         $CMD{$_} = search_path($_);  
 }  
 $CMD{tar}   = delete($CMD{gtar}) if $CMD{gtar};  
 $CMD{tar} ||= search_path('tar');  
   
 # CVS roots  # CVS roots
 #  #
 # CVSweb can handle several CVS repositories at once.  Enter short (internal)  # CVSweb can handle several CVS repositories at once.  Enter short (internal)
Line 56  $CMD{tar} ||= search_path('tar');
Line 39  $CMD{tar} ||= search_path('tar');
 # 'symbolic_name' => ['Name to display',  '/path/to/cvsroot']  # 'symbolic_name' => ['Name to display',  '/path/to/cvsroot']
 #  #
 @CVSrepositories = (  @CVSrepositories = (
         'local'   => ['Local Repository', '/var/cvs'],          'local'   => ['Local Repository', '/cvs'],
 #       'freebsd' => ['FreeBSD',          '/var/ncvs'],  
 #       'openbsd' => ['OpenBSD',          '/var/ncvs'],  
 #       'netbsd'  => ['NetBSD',           '/var/ncvs'],  
 #       'ruby'    => ['Ruby',             '/var/anoncvs/ruby'],  
 );  );
   
 # The default CVS root.  Note that @CVSrepositories is list, not a hash,  
 # so you'll want to use 2 * 0-based-index-number here; or set this directly  
 # to the default's symbolic name. Unless specified, the first valid one in  
 # @CVSrepositories is used as the default.  
 #  
 # For example:  
 #  
 #$cvstreedefault = $CVSrepositories[2 * 0];  
 #$cvstreedefault = 'local';  
   
 # Mirror sites.  The keys will be used as link texts, and the values are  
 # URLs pointing to the corresponding mirrors.  
 #  
 #%MIRRORS = (  
 #     'Other location'  => 'http://192.168.0.1/cgi-bin/cvsweb.cgi/',  
 #     'Yet another one' => 'http://192.168.0.2/cgi-bin/cvsweb.cgi/',  
 #);  
   
 # Bug tracking system linking options ("PR" means Problem Report, as in GNATS)  
 # This will be done only for views for which $allow_*_extra below is true.  
 #  
 #@prcategories = qw(  
 #    advocacy  
 #    alpha  
 #    bin  
 #    conf  
 #    docs  
 #    gnu  
 #    i386  
 #    kern  
 #    misc  
 #    pending  
 #    ports  
 #    sparc  
 #);  
 #$prcgi = "http://www.FreeBSD.org/cgi/query-pr.cgi?pr=%s";  
 #$prkeyword = "PR";  
   
 # Manual gateway linking.  This will be done only for views for which  # Manual gateway linking.  This will be done only for views for which
 # $allow_*_extra below is true.  # $allow_*_extra below is true.
 #  #
Line 139  $mancgi =
Line 80  $mancgi =
     #   h      Human readable      #   h      Human readable
     #   u      Unified diff      #   u      Unified diff
     #   c      Context diff      #   c      Context diff
     #   uc     Unified diff, enscript colored (falls back to "u" w/o enscript)  
     #   cc     Context diff, enscript colored (falls back to "c" w/o enscript)  
     "f" => "u",      "f" => "u",
   
     # hidecvsroot: Don't show the CVSROOT directory.  Note that this is      # hidecvsroot: Don't show the CVSROOT directory.  Note that this is
Line 178  $defaulttitle = "CVS Repository";
Line 117  $defaulttitle = "CVS Repository";
   
 # The address is shown on the footer.  This will be put inside a <address> tag.  # The address is shown on the footer.  This will be put inside a <address> tag.
 #  #
 $address = '<span style="font-size: smaller">FreeBSD-CVSweb</span>';  $address = '<span style="font-size: smaller">CVSweb</span>';
   
 $long_intro = <<EOT;  $long_intro = <<EOT;
 <p>  <p>
Line 199  by <a
Line 138  by <a
 href="http://www.opensource.org/licenses/bsd-license.html">The BSD License</a>.  href="http://www.opensource.org/licenses/bsd-license.html">The BSD License</a>.
 </p><p>  </p><p>
 If you would like to use this CGI script on your own web server and  If you would like to use this CGI script on your own web server and
 CVS tree, download the latest version from &lt;<a  CVS tree, download the latest version from
 href="http://www.FreeBSD.org/projects/cvsweb.html">http://www.FreeBSD.org/projects/cvsweb.html</a>&gt;.  &lt;<a href="http://cvsweb.bsd.lv/">http://cvsweb.bsd.lv/</a>&gt;.
 </p>  </p>
 EOT  EOT
   
Line 226  my $iconsdir = '/icons';
Line 165  my $iconsdir = '/icons';
      dir     => [('[DIR]',    "$iconsdir/dir.gif",       20,   22)],       dir     => [('[DIR]',    "$iconsdir/dir.gif",       20,   22)],
      file    => [('[TXT]',    "$iconsdir/text.gif",      20,   22)],       file    => [('[TXT]',    "$iconsdir/text.gif",      20,   22)],
      binfile => [('[BIN]',    "$iconsdir/binary.gif",    20,   22)],       binfile => [('[BIN]',    "$iconsdir/binary.gif",    20,   22)],
      graph   => [('[GRAPH]',  "$iconsdir/minigraph.png", 16,   16)],  
 );  );
 undef $iconsdir;  undef $iconsdir;
   
Line 392  $allow_markup = 1;
Line 330  $allow_markup = 1;
 #  #
 #$allow_mailtos = 0;  #$allow_mailtos = 0;
   
 ## Extra hyperlinking means hyperlinks to bug tracking systems and manual page  ## Extra hyperlinking means hyperlinks to manual page
 ## gateways, see $prcgi and $mancgi and related options above.  ## gateways, see $mancgi above.
   
 # Allow extra hyperlinking (such as PR cross-references) in logs?  # Allow extra hyperlinking (such as PR cross-references) in logs?
 # Default: yes.  # Default: yes.
Line 413  $allow_source_extra = 1;
Line 351  $allow_source_extra = 1;
 #  #
 #$allow_compress = 1;  #$allow_compress = 1;
   
 # Use JavaScript in the UI?  
 #  
 $use_java_script = 1;  
   
 # Show a form for setting options in the directory view?  # Show a form for setting options in the directory view?
 #  #
 $edit_option_form = 1;  $edit_option_form = 1;
Line 442  $show_log_in_markup = 1;
Line 376  $show_log_in_markup = 1;
 # multibyte character. (such as iso-2022-jp, ShiftJIS, etc.)  # multibyte character. (such as iso-2022-jp, ShiftJIS, etc.)
 # Otherwise those files will get screwed up in markup.  # Otherwise those files will get screwed up in markup.
 #  #
 # Note: enscript(1) highlighting is preferred over the built-in preformatting,  
 # ie. this has no effect if $allow_enscript is true and enscript can highlight  
 # the file.  
 #  
 #$preformat_in_markup = 1;  #$preformat_in_markup = 1;
   
 # Default tab width used to expand tabs to spaces in various HTMLized views.  # Default tab width used to expand tabs to spaces in various HTMLized views.
Line 455  $show_log_in_markup = 1;
Line 385  $show_log_in_markup = 1;
 #  #
 #$tabstop = 4;  #$tabstop = 4;
   
 # If you wish to display absolute times in your local timezone,  
 # then define @mytz and fill in the strings for your standard and  
 # daylight time. Note that you must also make sure the system  
 # timezone is correctly set.  
 #  
 #@mytz=("EST", "EDT");  
   
 # CVSweb is friendly to caches by sending the HTTP Last-Modified  # CVSweb is friendly to caches by sending the HTTP Last-Modified
 # header corresponding to the sent content.  In the case of a  # header corresponding to the sent content.  In the case of a
 # checkout, this may require running rcslog on the file solely for the  # checkout, this may require running rcslog on the file solely for the
Line 471  $show_log_in_markup = 1;
Line 394  $show_log_in_markup = 1;
 $use_moddate = 1;  $use_moddate = 1;
   
 # Maximum number of filenames to pass to rlog(1) in one command.  # Maximum number of filenames to pass to rlog(1) in one command.
 # If you see "Failed to spawn GNU rlog" errors with directories containing  # If you see "Failed to spawn rlog" errors with directories containing
 # lots of files, experiment by setting this to different values and see if  # lots of files, experiment by setting this to different values and see if
 # the error still occurs.  A good value to start from would be eg. 200.  # the error still occurs.  A good value to start from would be eg. 200.
 # Just comment this out if you're not bitten by the problem.  # Just comment this out if you're not bitten by the problem.
 #  #
 #$file_list_len = 200;  #$file_list_len = 200;
   
 # Allow graphical representations of file revisions and branches with CvsGraph?  # Whether to allow downloading a tarball of the current directory.
 #  
 $allow_cvsgraph = $CMD{cvsgraph} ? 1 : 0;  
   
 # Path to the CvsGraph configuration file.  Only used if $allow_cvsgraph  
 # is true.  Leave this empty or comment it out to make cvsgraph(1) use its  
 # default configuration file.  Note that CVSweb will override some of the  
 # settings in the configuration file with command line options, see  
 # doGraph() and doGraphView() in cvsweb.cgi for details.  
 #  
 #$cvsgraph_config = "/etc/cvsgraph.conf";  
   
 # URL to the CVSHistory script.  This should be absolute (but does not need  
 # to include the host and port if the script is on the same server as  
 # CVSweb).  
 #$cvshistory_url = "/cgi-bin/cvshistory.cgi";  
   
 # Whether to allow downloading a tarball or a zip of the current directory.  
 # While downloading of the entire repository is disallowed, depending on  # While downloading of the entire repository is disallowed, depending on
 # the directory this may take a lot of time and disk space.  For some CVS  # the directory this may take a lot of time and disk space.  For some CVS
 # versions, the user account running CVSweb needs write access to  # versions, the user account running CVSweb needs write access to
 # CVSROOT/val-tags.  See also the tar, gzip and zip options below.  # CVSROOT/val-tags.  See also the tar and gzip options below.
 #  #
 #$allow_tar = (($CMD{tar} && $CMD{gzip}) || $CMD{zip}) ? 1 : 0;  #$allow_tar = ($CMD{tar} && $CMD{gzip}) ? 1 : 0;
   
 # Options to pass to tar(1).  # Options to pass to tar(1).
 # For example: @tar_options = qw(--ignore-failed-read);  # For example: @tar_options = qw(--ignore-failed-read);
Line 518  $allow_cvsgraph = $CMD{cvsgraph} ? 1 : 0;
Line 424  $allow_cvsgraph = $CMD{cvsgraph} ? 1 : 0;
 #  #
 @gzip_options = qw();  @gzip_options = qw();
   
 # Options to pass to zip(1) when compressing a zip archive to download.  
 # For example: @zip_options = qw(-3);  
 # Try lower compression level than 6 (default) if you want faster  
 # compression, or higher for better compression.  
 #  
 @zip_options = qw(-q);  
   
 # Options to pass to cvs(1).  # Options to pass to cvs(1).
 # For cvs versions 1.11 to 1.11.6 (broken in < 1.11, removed in 1.11.7), you  # For cvs versions 1.11 to 1.11.6 (broken in < 1.11, removed in 1.11.7), you
 # can use the '-l' option to prevent cvs from writing to the history file.  # can use the '-l' option to prevent cvs from writing to the history file.
Line 554  $ENV{CVSREADONLYFS} = 1 unless exists($ENV{CVSREADONLY
Line 453  $ENV{CVSREADONLYFS} = 1 unless exists($ENV{CVSREADONLY
 #  #
 @rcsdiff_options = qw(-q);  @rcsdiff_options = qw(-q);
   
 # Enables syntax highlighting using GNU Enscript if set.  
 # You will need GNU Enscript version 1.6.3 or newer for this to work.  
 #  
 #$allow_enscript = $CMD{enscript} ? 1 : 0;  
   
 # Options to pass to enscript(1).  
 # Do not set the -q, --language, -o or --highlight options here.  
 # Most useful styles are probably emacs, emacs_verbose and msvc.  
 #  
 @enscript_options = qw(--style=emacs --color=1);  
   
 # Enscript highlight rule to filename regex mappings.  The set of useful  
 # mappings depends on what highlight rules the system has installed.  
 #  
 %enscript_types =  
   (  
    'ada'          => qr/\.ad(s|b|a)$/o,  
    'asm'          => qr/\.[Ss]$/o,  
    'awk'          => qr/\.awk$/o,  
    'bash'         => qr/\.(bash(_profile|rc)|inputrc)$/o,  
    'c'            => qr/\.(c|h)$/o,  
    'changelog'    => qr/^changelog$/io,  
    'cpp'          => qr/\.(c\+\+|C|H|cpp|cc|cxx)$/o,  
    'csh'          => qr/\.(csh(rc)?|log(in|out)|history)$/o,  
    'elisp'        => qr/\.e(l|macs)$/o,  
    'fortran'      => qr/\.[fF]$/o,  
    'haskell'      => qr/\.(l?h|l?g)s$/o,  
    'html'         => qr/\.x?html?$/o,  
    'idl'          => qr/\.idl$/o,  
    'inf'          => qr/\.inf$/io,  
    'java'         => qr/\.java$/o,  
    'javascript'   => qr/\.(js|pac)$/o,  
    'ksh'          => qr/\.ksh$/o,  
    'm4'           => qr/\.m4$/o,  
    'makefile'     => qr/(GNU)?[Mm]akefile(?!\.PL\b)|\.(ma?ke?|am)$/o,  
    'matlab'       => qr/\.m$/o,  
    'nroff'        => qr/\.man$/o,  
    'pascal'       => qr/\.p(as|p)?$/io,  
    'perl'         => qr/\.p(m|(er)?l)$/io,  
    'postscript'   => qr/\.e?ps$/io,  
    'python'       => qr/\.py$/o,  
    'rfc'          => qr/\b((rfc|draft)\..*\.txt)$/o,  
    'scheme'       => qr/\.(scm|scheme)$/o,  
    'sh'           => qr/\.sh$/o,  
    'skill'        => qr/\.il$/o,  
    'sql'          => qr/\.sql$/o,  
    'states'       => qr/\.st$/o,  
    'synopsys'     => qr/\.s(cr|yn(th)?)$/o,  
    'tcl'          => qr/\.tcl$/o,  
    'tcsh'         => qr/\.tcshrc$/o,  
    'tex'          => qr/\.tex$/o,  
    'vba'          => qr/\.vba$/o,  
    'verilog'      => qr/\.(v|vh)$/o,  
    'vhdl'         => qr/\.vhdl?$/o,  
    'vrml'         => qr/\.wrl$/o,  
    'wmlscript'    => qr/\.wmls(cript)?$/o,  
    'zsh'          => qr/\.(zsh(env|rc)|z(profile|log(in|out)))$/o,  
   );  
   
 # Troubleshooting: in case of problems, setting this to 1 will cause more  # Troubleshooting: in case of problems, setting this to 1 will cause more
 # error output into your web server error log.  Under normal operation,  # error output into your web server error log.  Under normal operation,
 # this should be set to 0 or commented out.  # this should be set to 0 or commented out.
 #  #
 #$DEBUG = 1;  #$DEBUG = 1;
   
 # Enable this to let CVSweb load extra configuration files from the "conf.d"  
 # subdirectory of the directory this file is located in.  This enables site  
 # specific configuration without having to modify this "master" configuration  
 # file (except for enabling this functionality below :)  
 #  
 if (0) {  
   my $confdir = catdir(dirname(__FILE__), 'conf.d');  
   if (opendir(CONFD, $confdir)) {  
     my @files = sort(map(catfile($confdir, $_), readdir(CONFD)));  
     close(CONFD);  
     for my $conffile (grep(-f && -r _, @files)) {  
       ($conffile) = ($conffile =~ /(.+\.conf)$/) or next;  
       do "$conffile" or config_error($conffile, $@);  
     }  
   }  
 }  
   
 1;  1;
   
Legend:
Removed from v.4.3  
changed lines
  Added in v.4.17
CVSweb