===================================================================
RCS file: /cvs/cvsweb/Attic/cvsweb.conf,v
retrieving revision 4.9
retrieving revision 4.18
diff -u -p -r4.9 -r4.18
--- cvsweb/Attic/cvsweb.conf	2019/11/26 10:58:15	4.9
+++ cvsweb/Attic/cvsweb.conf	2019/11/29 14:29:48	4.18
@@ -1,5 +1,5 @@
 # -*- perl -*-
-# $Id: cvsweb.conf,v 4.9 2019/11/26 10:58:15 schwarze Exp $
+# $Id: cvsweb.conf,v 4.18 2019/11/29 14:29:48 schwarze Exp $
 # $doc: cvsweb.conf,v 1.38 2006/01/19 19:53:38 ceri
 # $knu: cvsweb.conf,v 1.97 2005/06/19 09:13:50 scop
 #
@@ -16,21 +16,6 @@
 # when no value for them has been explicitly set.
 #
 
-# Set the path for the following commands:
-#   cvs, rlog, rcsdiff
-#   gzip (if you enable $allow_compress)
-#   (g)tar, zip (if you enable $allow_tar)
-#
-@command_path = qw(/bin /usr/bin /usr/local/bin);
-
-# Search the above directories for each command (prefer gtar over tar).
-#
-for (qw(cvs rlog rcsdiff gzip gtar zip)) {
-	$CMD{$_} = search_path($_);
-}
-$CMD{tar}   = delete($CMD{gtar}) if $CMD{gtar};
-$CMD{tar} ||= search_path('tar');
-
 # CVS roots
 #
 # CVSweb can handle several CVS repositories at once.  Enter short (internal)
@@ -57,24 +42,6 @@ $CMD{tar} ||= search_path('tar');
         'local'   => ['Local Repository', '/cvs'],
 );
 
-# The default CVS root.  Note that @CVSrepositories is list, not a hash,
-# so you'll want to use 2 * 0-based-index-number here; or set this directly
-# to the default's symbolic name. Unless specified, the first valid one in
-# @CVSrepositories is used as the default.
-#
-# For example:
-#
-#$cvstreedefault = $CVSrepositories[2 * 0];
-#$cvstreedefault = 'local';
-
-# Mirror sites.  The keys will be used as link texts, and the values are
-# URLs pointing to the corresponding mirrors.
-#
-#%MIRRORS = (
-#     'Other location'  => 'http://192.168.0.1/cgi-bin/cvsweb.cgi/',
-#     'Yet another one' => 'http://192.168.0.2/cgi-bin/cvsweb.cgi/',
-#);
-
 # Manual gateway linking.  This will be done only for views for which
 # $allow_*_extra below is true.
 #
@@ -418,13 +385,6 @@ $show_log_in_markup = 1;
 #
 #$tabstop = 4;
 
-# If you wish to display absolute times in your local timezone,
-# then define @mytz and fill in the strings for your standard and
-# daylight time. Note that you must also make sure the system
-# timezone is correctly set.
-#
-#@mytz=("EST", "EDT");
-
 # CVSweb is friendly to caches by sending the HTTP Last-Modified
 # header corresponding to the sent content.  In the case of a
 # checkout, this may require running rcslog on the file solely for the
@@ -434,25 +394,20 @@ $show_log_in_markup = 1;
 $use_moddate = 1;
 
 # Maximum number of filenames to pass to rlog(1) in one command.
-# If you see "Failed to spawn GNU rlog" errors with directories containing
+# If you see "Failed to spawn rlog" errors with directories containing
 # lots of files, experiment by setting this to different values and see if
 # the error still occurs.  A good value to start from would be eg. 200.
 # Just comment this out if you're not bitten by the problem.
 #
 #$file_list_len = 200;
 
-# URL to the CVSHistory script.  This should be absolute (but does not need
-# to include the host and port if the script is on the same server as
-# CVSweb).
-#$cvshistory_url = "/cgi-bin/cvshistory.cgi";
-
-# Whether to allow downloading a tarball or a zip of the current directory.
+# Whether to allow downloading a tarball of the current directory.
 # While downloading of the entire repository is disallowed, depending on
 # the directory this may take a lot of time and disk space.  For some CVS
 # versions, the user account running CVSweb needs write access to
-# CVSROOT/val-tags.  See also the tar, gzip and zip options below.
+# CVSROOT/val-tags.  See also the tar options below.
 #
-#$allow_tar = (($CMD{tar} && $CMD{gzip}) || $CMD{zip}) ? 1 : 0;
+$allow_tar = 0;
 
 # Options to pass to tar(1).
 # For example: @tar_options = qw(--ignore-failed-read);
@@ -462,20 +417,6 @@ $use_moddate = 1;
 #
 @tar_options = qw();
 
-# Options to pass to gzip(1) when compressing a tarball to download.
-# For example: @gzip_options = qw(-3);
-# Try lower compression level than 6 (default) if you want faster
-# compression, or higher for better compression.
-#
-@gzip_options = qw();
-
-# Options to pass to zip(1) when compressing a zip archive to download.
-# For example: @zip_options = qw(-3);
-# Try lower compression level than 6 (default) if you want faster
-# compression, or higher for better compression.
-#
-@zip_options = qw(-q);
-
 # Options to pass to cvs(1).
 # For cvs versions 1.11 to 1.11.6 (broken in < 1.11, removed in 1.11.7), you
 # can use the '-l' option to prevent cvs from writing to the history file.
@@ -510,23 +451,6 @@ $ENV{CVSREADONLYFS} = 1 unless exists($ENV{CVSREADONLY
 # this should be set to 0 or commented out.
 #
 #$DEBUG = 1;
-
-# Enable this to let CVSweb load extra configuration files from the "conf.d"
-# subdirectory of the directory this file is located in.  This enables site
-# specific configuration without having to modify this "master" configuration
-# file (except for enabling this functionality below :)
-#
-if (0) {
-  my $confdir = catdir(dirname(__FILE__), 'conf.d');
-  if (opendir(CONFD, $confdir)) {
-    my @files = sort(map(catfile($confdir, $_), readdir(CONFD)));
-    close(CONFD);
-    for my $conffile (grep(-f && -r _, @files)) {
-      ($conffile) = ($conffile =~ /(.+\.conf)$/) or next;
-      do "$conffile" or config_error($conffile, $@);
-    }
-  }
-}
 
 1;