[BACK]Return to cvsweb.conf CVS log [TXT][DIR] Up to [cvsweb.bsd.lv] / cvsweb

Annotation of cvsweb/cvsweb.conf, Revision 3.36.2.9

3.1       knu         1: # -*-perl-*-
                      2: # Configuration of cvsweb.cgi, the
                      3: # CGI interface to CVS Repositories.
                      4: #
                      5: # (c) 1998-1999 H. Zeller    <zeller@think.de>
                      6: #     1999      H. Nordstrom <hno@hem.passagen.se>
3.30      knu         7: #     2000-2002 A. MUSHA     <knu@FreeBSD.org>
3.32      scop        8: #     2002      V. Skyttä    <scop@FreeBSD.org>
3.1       knu         9: #          based on work by Bill Fenner  <fenner@FreeBSD.org>
3.28      knu        10: #
3.30      knu        11: # $FreeBSD$
3.36.2.9! schwarze   12: # $Id: cvsweb.conf,v 3.36.2.8 2019/03/21 19:53:06 schwarze Exp $
3.28      knu        13: # $Idaemons: /home/cvs/cvsweb/cvsweb.conf,v 3.27 2001/08/01 09:48:39 knu Exp $
3.1       knu        14: #
                     15: ###
                     16:
3.19      knu        17: # Set the path for the following commands:
                     18: #   uname, cvs, rlog, rcsdiff
                     19: #   gzip (if you enable $allow_compress)
3.25      knu        20: #   tar, rm, zip (if you enable $allow_tar)
3.19      knu        21: $command_path = '/bin:/usr/bin:/usr/local/bin';
                     22:
                     23: # Search the above directories for each command
3.25      knu        24: for (qw(uname cvs rlog rcsdiff gzip tar rm zip)) {
3.26      knu        25:        $CMD{$_} = search_path($_);
3.19      knu        26: }
                     27:
                     28: # The name of the operating system implementation
3.21      knu        29: chomp($uname = `$CMD{uname}`);
3.19      knu        30:
3.1       knu        31: ##############
                     32: # CVS Root
                     33: ##############
                     34: # CVSweb can handle several CVS-Repositories
                     35: # at once. Enter a short symbolic names and the
                     36: # full path of these repositories here.
                     37: # NOTE that the symbolic names may not contain
                     38: # whitespaces.
                     39: # Note, that cvsweb.cgi currently needs to have physical access
                     40: # to the CVS repository so :pserver:someone@xyz.com:/data/cvsroot
                     41: # won't work!
                     42:
3.17      knu        43: # 'symbolic_name' => ['name_to_display', 'path_to_the_actual_repository']
                     44: # Listed in the order specified:
                     45: @CVSrepositories = (
3.26      knu        46:        'local'   => ['Local Repository', '/home/cvs'],
                     47: #      'freebsd' => ['FreeBSD',          '/home/ncvs'],
                     48: #      'openbsd' => ['OpenBSD',          '/home/ncvs'],
                     49: #      'netbsd'  => ['NetBSD',           '/home/ncvs'],
                     50: #      'ruby'    => ['Ruby',             '/var/anoncvs/ruby'],
                     51: );
3.1       knu        52:
                     53: # This tree is enabled by default when
                     54: # you enter the page
3.26      knu        55: $cvstreedefault = $CVSrepositories[2 * 0];    # The first one
3.1       knu        56:
                     57: ##############
3.15      knu        58: # Bug tracking system options
                     59: # ("PR" means Problem Report, as in GNATS)
3.1       knu        60: ##############
3.15      knu        61: #@prcategories = qw(
3.26      knu        62: #    advocacy
                     63: #    alpha
                     64: #    bin
                     65: #    conf
                     66: #    docs
                     67: #    gnu
                     68: #    i386
                     69: #    kern
                     70: #    misc
                     71: #    pending
                     72: #    ports
                     73: #    sparc
                     74: #);
                     75:
3.15      knu        76: #
                     77: #$prcgi = "http://www.FreeBSD.org/cgi/query-pr.cgi?pr=%s";
                     78: #
                     79: #$prkeyword = "PR";
3.1       knu        80:
                     81: ##############
3.15      knu        82: # Manual gateway
3.8       knu        83: ##############
3.36.2.6  schwarze   84: $mancgi = "https://man.openbsd.org/%s.%s";
3.1       knu        85:
                     86: ##############
                     87: # Defaults for UserSettings
                     88: ##############
                     89: %DEFAULTVALUE = (
3.26      knu        90:
                     91:        # sortby: File sort order
                     92:        #   file   Sort by filename
                     93:        #   rev    Sort by revision number
                     94:        #   date   Sort by commit date
                     95:        #   author Sort by author
                     96:        #   log    Sort by log message
                     97:
                     98:        "sortby" => "file",
                     99:
                    100:        # hideattic: Hide or show files in Attic
                    101:        #   1      Hide files in Attic
                    102:        #   0      Show files in Attic
                    103:
                    104:        "hideattic" => "1",
                    105:
                    106:        # logsort: Sort order for CVS logs
                    107:        #   date   Sort revisions by date
                    108:        #   rev    Sort revision by revision number
                    109:        #   cvs    Don't sort them. Same order as CVS/RCS shows them.
                    110:
                    111:        "logsort" => "date",
                    112:
                    113:        # f:     Default diff format
                    114:        #   h      Human readable
                    115:        #   u      Unified diff
                    116:        #   c      Context diff
                    117:        "f" => "u",
                    118:
                    119:        # hidecvsroot: Don't show the CVSROOT directory
                    120:        #   1      Hide CVSROOT directory
                    121:        #   0      Show CVSROOT directory
                    122:        "hidecvsroot" => "0",
                    123:
                    124:        # hidenonreadable: Don't show entries which cannot be read
                    125:        #   1      Hide non-readable entries
                    126:        #   0      Show non-readable entries
                    127:        "hidenonreadable" => "1",
3.1       knu       128: );
                    129:
                    130: ##############
                    131: # some layout stuff
                    132: ##############
                    133:
3.9       knu       134: # The body-tag for directory views and logs
3.1       knu       135: $body_tag = '<body text="#000000" bgcolor="#ffffff">';
                    136:
3.9       knu       137: # The body-tag for diffs and annotations
                    138: $body_tag_for_src = '<body text="#000000" bgcolor="#eeeeee">';
                    139:
3.1       knu       140: # Wanna have a logo on the page ?
3.30      knu       141: $logo = '<p><img src="/icons/apache_pb.gif" alt="Powered by Apache"></p>';
3.1       knu       142:
3.34      scop      143: # The title of the Page on startup.  This will be put inside a <h1> tag.
3.1       knu       144: $defaulttitle = "CVS Repository";
                    145:
3.34      scop      146: # The address is shown on the footer.  This will be put inside a <address> tag.
3.36.2.4  schwarze  147: $address = '<span style="font-size: smaller">FreeBSD-CVSweb</span>';
3.1       knu       148:
                    149: # color of navigation Header for
                    150: # diffs and annotations
                    151: $navigationHeaderColor = '#9999ee';
                    152:
                    153: $long_intro = <<EOT;
                    154: <p>
                    155: This is a WWW interface for CVS Repositories.
                    156: You can browse the file hierarchy by picking directories
                    157: (which have slashes after them, <i>e.g.</i>, <b>src/</b>).
                    158: If you pick a file, you will see the revision history
                    159: for that file.
                    160: Selecting a revision number will download that revision of
                    161: the file.  There is a link at each revision to display
                    162: diffs between that revision and the previous one, and
                    163: a form at the bottom of the page that allows you to
                    164: display diffs between arbitrary revisions.
                    165: </p>
                    166: <p>
3.33      scop      167: This script has been written by Bill Fenner and improved by Henner Zeller,
                    168: Henrik Nordstr&ouml;m, and Ken Coar, then Akinori MUSHA brought it
3.22      knu       169: back to FreeBSD community and made further improvements; it is covered
3.33      scop      170: by <a
                    171: href="http://www.opensource.org/licenses/bsd-license.html">The BSD Licence</a>.
3.1       knu       172: </p>
                    173: <p>
                    174: If you would like to use this CGI script on your own web server and
3.33      scop      175: CVS tree, download the latest version from &lt;URL:<a
                    176: href="http://www.FreeBSD.org/projects/cvsweb.html">http://www.FreeBSD.org/projects/cvsweb.html</a>&gt;.
3.1       knu       177: </p>
                    178: EOT
                    179:
                    180: $short_instruction = <<EOT;
                    181: <p>
                    182: Click on a directory to enter that directory. Click on a file to display
3.32      scop      183: its revision history and to get a chance to display diffs between revisions.
3.1       knu       184: </p>
                    185: EOT
                    186:
                    187: # used icons; if icon-url is empty, the text representation is used; if
                    188: # you do not want to have an ugly tooltip for the icon, remove the
                    189: # text-representation.
                    190: # The width and height of the icon allow the browser to correcly display
                    191: # the table while still loading the icons.
                    192: # These default icons are coming with apache.
                    193: # If these icons are too large, check out the miniicons in the
                    194: # icons/ directory; they have a width/height of 16/16
3.36.2.9! schwarze  195: my $iconsdir = "/cvsweb/icons";
3.26      knu       196:
3.15      knu       197: # format:             TEXT      ICON-URL              width height
3.26      knu       198: %ICONS = (
                    199:        back => [("[BACK]", "$iconsdir/back.gif", 20, 22)],
                    200:        dir  => [("[DIR]",  "$iconsdir/dir.gif",  20, 22)],
                    201:        file => [("[TXT]",  "$iconsdir/text.gif", 20, 22)],
                    202: );
3.15      knu       203: undef $iconsdir;
3.1       knu       204:
                    205: # the length to which the last logentry should
                    206: # be truncated when shown in the directory view
                    207: $shortLogLen = 80;
                    208:
                    209: # Show author of last change
                    210: $show_author = 1;
                    211:
                    212: ##############
                    213: # table view for directories
                    214: ##############
                    215:
                    216: # Show directory as table
                    217: # this is much more readable but has one
                    218: # drawback: the whole table has to be loaded
                    219: # before common browsers display it which may
                    220: # be annoying if you have a slow link - and a
                    221: # large directory ..
                    222: $dirtable = 1;
                    223:
                    224: # show different colors for even/odd rows
                    225: @tabcolors = ('#ffffff', '#ffffff');
                    226: $tablepadding = 2;
                    227:
                    228: # Color of Header
                    229: $columnHeaderColorDefault = '#ffffcc';
                    230: $columnHeaderColorSorted  = '#ffcc66';
                    231:
                    232: #
                    233: # If you want to have colored borders
                    234: # around each row, uncomment this
                    235: $tableBorderColor = '#cccccc';
                    236:
                    237: #
                    238: # Modules in the repository that should not be displayed, either by default
                    239: # nor by explicit path specification.
                    240: #
3.27      knu       241: @HideModules = (
                    242: #      "^my/secret/module",
                    243: );
                    244:
                    245: #
                    246: # Files matching these pathnames shouldn't be checked out with cvsweb,
                    247: # since they may contain sensitive information. Simple file name based
                    248: # filter. Often, the CVSROOT/passwd is exposed and some people tend
                    249: # to check in their .cvspass, though this is a bad idea. These files
                    250: # shouldn't be readable by default. Thanks to Damian Gryski to point
                    251: # this out.
3.36      scop      252: # Note that this affects only files, not directories.
3.27      knu       253: @ForbiddenFiles = (
                    254:        "^CVSROOT/passwd\$",   # CVSROOT/passwd should not be cvs add'ed, though
                    255:        "/\\.cvspass\$",       # Ditto.  Just in case.
                    256: );
3.1       knu       257:
                    258: #
                    259: # Use CVSROOT/CVSROOT/descriptions for describing the directories/modules
                    260: # See INSTALL section 8
                    261: #
                    262: $use_descriptions = 0;
                    263:
                    264: ##############
                    265: # Human Readable Diff
                    266: ##############
                    267:
                    268: # (c) 1998 H. Zeller <zeller@think.de>
                    269: #
                    270: # Generates two columns of color encoded
                    271: # diff; much like xdiff or emacs-ediff mode.
                    272: #
                    273: # The diff-stuff is a piece of code I once made for
                    274: # cvs2html which is under GPL,
                    275: # see http://www.sslug.dk/cvs2html
                    276: # (c) 1997/98 Peter Toft <pto@sslug.imm.dtu.dk>
                    277: #
                    278: # some parameters to screw:
                    279: ##
                    280:
                    281: # make lines breakable so that the columns do not
                    282: # exceed the width of the browser
                    283: $hr_breakable = 1;
                    284:
3.4       knu       285: # give out function names in diffs
3.1       knu       286: # this just makes sense if we have C-files, otherwise
                    287: # diff's heuristic doesn't work well ..
                    288: # ( '-p' option to diff)
3.4       knu       289: $showfunc = 1;
3.1       knu       290:
                    291: # ignore whitespaces for human readable diffs
                    292: # (indendation and stuff ..)
                    293: # ( '-w' option to diff)
3.7       knu       294: $hr_ignwhite = 0;
3.1       knu       295:
                    296: # ignore diffs which are caused by
                    297: # keyword-substitution like $Id - Stuff
                    298: # ( '-kk' option to rcsdiff)
                    299: $hr_ignkeysubst = 1;
                    300:
                    301: # Colors and font to show the diff type of code changes
3.26      knu       302: $diffcolorHeading    = '#99cccc';    # color of 'Line'-head of each diffed file
                    303: $diffcolorEmpty      = '#cccccc';    # color of 'empty' lines
                    304: $diffcolorRemove     = '#ff9999';    # Removed line(s) (left)  (  -  )
                    305: $diffcolorChange     = '#99ff99';    # Changed line(s) (     both    )
                    306: $diffcolorAdd        = '#ccccff';    # Added line(s)   (  - )  (right)
                    307: $diffcolorDarkChange = '#99cc99';    # lines, which are empty in change
                    308: $difffontface = "Helvetica,Arial";
                    309: $difffontsize = "-1";
3.1       knu       310:
                    311: # the width of the textinput of the
                    312: # request-diff-form
                    313: $inputTextSize = 12;
                    314:
                    315: ##############
                    316: # Mime Types
                    317: ##############
                    318:
                    319: # mapping to mimetypes to help
                    320: # cvsweb to guess the correct mime-type on
                    321: # checkout; you can use the mime.types from
                    322: # apache here:
3.36.2.7  schwarze  323: $mime_types = '/conf/mime.types';
3.1       knu       324:
                    325: # quick mime-type lookup; maps file-suffices to
                    326: # mime-types for displaying checkouts in the browser.
                    327: # Further MimeTypes will be found in the
                    328: # file $mime_types (apache style mime.types - file)
                    329: # - add common mappings here for faster lookup
                    330: %MTYPES = (
3.26      knu       331:        "html"  => "text/html",
                    332:        "shtml" => "text/html",
                    333:        "gif"   => "image/gif",
                    334:        "jpeg"  => "image/jpeg",
                    335:        "jpg"   => "image/jpeg",
                    336:        "png"   => "image/png",
                    337:        "xpm"   => "image/xpm",
                    338:        "*"     => "text/plain",
                    339: );
3.11      knu       340:
                    341: # Charset for HTML output
3.13      knu       342: $charset = '';
3.26      knu       343:
3.13      knu       344: # e.g.
                    345: #$charset = $where =~ m,/ru[/_-], ? 'koi8-r'
                    346: #  : $where =~ m,/zh[/_-], ? 'big5'
                    347: #  : $where =~ m,/ja[/_-], ? 'x-euc-jp'
                    348: #  : $where =~ m,/ko[/_-], ? 'x-euc-kr'
                    349: #  : 'iso-8859-1';
3.29      knu       350:
                    351: # Output filter
                    352: $output_filter = '';
                    353:
                    354: # e.g.
                    355: ## unify/convert Japanese code into EUC-JP
                    356: #$output_filter= '/usr/local/bin/nkf -e';
3.1       knu       357:
                    358: ##############
                    359: # Misc
                    360: ##############
                    361: # allow annotation of files
                    362: # this requires rw-access to the
3.12      knu       363: # CVSROOT/history file (if you have one)
                    364: # and rw-access to the subdirectory to
                    365: # place the lock so you maybe don't want it
3.1       knu       366: $allow_annotate = 1;
                    367:
                    368: # allow pretty-printed version of files
                    369: $allow_markup = 1;
                    370:
3.31      knu       371: # allow extra hlink formatting (such as PR xrefs) in logs
                    372: $allow_log_extra = 1; # default: enabled
                    373:
                    374: # allow extra hlink formatting (such as PR xrefs) in directories
                    375: $allow_dir_extra = 1;
                    376:
                    377: # allow extra hlink formatting in source code/formatted diff views
                    378: $allow_source_extra = 1;
                    379:
3.1       knu       380: # allow compression with gzip
                    381: # of output if the Browser accepts
                    382: # it (HTTP_ACCEPT_ENCODING=gzip)
                    383: # [make sure to have gzip in the path]
3.16      knu       384: $allow_compress = 0;
3.1       knu       385:
                    386: # Make use of javascript functions.
                    387: # This way you can select one of your CVSroot
                    388: # without pressing 'Go' (.. if you do have more
                    389: # than one CVSROOT defined)
                    390: $use_java_script = 1;
                    391:
                    392: # open Download-Links in another window
                    393: $open_extern_window = 1;
                    394:
                    395: # The size of this extern window; this size option
                    396: # needs use_java_script to be defined
                    397: # just comment them if you don't want to have a fixed
                    398: # size
                    399: #$extern_window_width = 600;
                    400: #$extern_window_height = 440;
                    401:
                    402: # Edit Options
                    403: # Enable form to edit your options (hideattic,sortbydate)
                    404: # this isn't necessary if you've $dirtable defined 'cause
                    405: # this allows editing of all your options more intuitive
                    406: $edit_option_form = (not $dirtable);
                    407:
                    408: # If you have files which automatically refers to other files
                    409: # (such as HTML) then this allows you to browse the checked
                    410: # out files as if outside CVS.
                    411: $checkout_magic = 1;
                    412:
                    413: # Show last changelog message for sub directories
                    414: # The current implementation makes many assumptions and may show the
                    415: # incorrect file at some times. The main assumption is that the last
                    416: # modified file has the newest filedate. But some CVS operations
                    417: # touches the file without even when a new version is't checked in,
                    418: # and TAG based browsing essientially puts this out of order, unless
                    419: # the last checkin was on the same tag as you are viewing.
                    420: # Enable this if you like the feature, but don't rely on correct results.
                    421: $show_subdir_lastmod = 0;
                    422:
                    423: # Background color of logentry in markup
                    424: $markupLogColor = "#ffffff";
                    425:
                    426: # Show CVS log when viewing file contents
                    427: $show_log_in_markup = 1;
                    428:
3.13      knu       429: # Preformat when viewing file contents.  This should be turned off
                    430: # when you have files in the repository that are in a multibyte
                    431: # encoding which uses HTML special characters ([<>&"]) as part of a
                    432: # multi-byte character. (such as iso-2022-jp, ShiftJIS, etc.)
                    433: # Otherwise those files will get screwed up in markup.
                    434: $preformat_in_markup = '';
                    435:
3.1       knu       436: # Tabstop used to expand tabs in colored diffs. If undefined then
                    437: # tabs are always expanded to 8 spaces.
                    438: $tabstop = 8;
                    439:
                    440: # if you wish to display absolute times in your local timezone,
                    441: # then define mytz and fill in the strings for your standard and
                    442: # daylight time. Note that you must also make sure the system
                    443: # timezone is correctly set.
                    444: # @mytz=("EST", "EDT");
                    445:
                    446: # cvsweb is friendly to caches by indicating a suitable
                    447: # last-modified timestamp. Doing this uses slightly more
                    448: # CPU so you might want to disable it if you have a slow
                    449: # server
                    450: $use_moddate = 1;
                    451:
3.12      knu       452: # Allows downloading a tarball of the current directory if set.
                    453: # Bear in mind that this allows downloading a tarball of your entire
                    454: # repository, which can take a lot of time and disk space to create!
                    455: # If you enable this, you may need to make sure that cvsweb can write to
                    456: # CVSROOT/val-tags, due to a bug in cvs.
                    457: $allow_tar = '';
3.13      knu       458:
                    459: # Options to pass to tar(1).
3.15      knu       460: @tar_options = qw();
3.26      knu       461:
3.13      knu       462: # e.g. @tar_options = qw(--ignore-failed-read);
                    463: #      GNU tar has some useful options against unexpected errors.
                    464:
3.19      knu       465: # Options to pass to gzip(1) when compressing a tarball to download.
                    466: @gzip_options = qw();
3.26      knu       467:
3.19      knu       468: # e.g. @gzip_options = qw(-3);
3.25      knu       469: #      Try lower compression level than 6 (default) if you want faster
                    470: #      compression, or higher, for better compression.
                    471:
                    472: # Options to pass to zip(1) when compressing a zip archive to download.
                    473: @zip_options = qw();
3.26      knu       474:
3.25      knu       475: # e.g. @zip_options = qw(-3);
3.19      knu       476: #      Try lower compression level than 6 (default) if you want faster
3.21      knu       477: #      compression, or higher, for better compression.
3.19      knu       478:
3.13      knu       479: # Options to pass to cvs(1).
3.36.2.1  scop      480: # For cvs versions prior to 1.11, the '-l' option doesn't work; If you want
                    481: # working checkouts with an older cvs version, you'll have to make sure that
                    482: # the cvsweb user can read and write to CVSROOT/history.
3.35      scop      483: @cvs_options = qw(-lf);
3.19      knu       484:
                    485: push @cvs_options, '-R' if ($uname eq 'FreeBSD' || $uname eq 'OpenBSD');
3.36.2.2  scop      486: push @cvs_options, '-u' if ($uname eq 'NetBSD');
3.26      knu       487:
3.19      knu       488: #      Only FreeBSD's and OpenBSD's cvs(1) supports -R (read only access
                    489: #      mode) option, which considerably speeds up checkouts over NFS.
3.36.2.2  scop      490: #      A similar effect is provided by -u on NetBSD.
3.12      knu       491:
3.36.2.3  scop      492: # Options to pass to the 'cvs annotate' command, usually the normal
                    493: # @cvs_options are good enough here.
                    494: @annotate_options = @cvs_options;
                    495:
                    496: #      To make annotate work against a read only repository, add -n, e.g.:
                    497: #      @annotate_options = (@cvs_options, '-n');
                    498:
3.12      knu       499: 1;
3.26      knu       500:
3.1       knu       501: #EOF

CVSweb