=================================================================== RCS file: /cvs/cvsweb/cvsweb.cgi,v retrieving revision 3.9 retrieving revision 4.25 diff -u -p -r3.9 -r4.25 --- cvsweb/cvsweb.cgi 2000/07/29 12:41:25 3.9 +++ cvsweb/cvsweb.cgi 2019/11/26 11:53:01 4.25 @@ -1,14 +1,19 @@ -#!/usr/bin/perl -ws +#!/usr/bin/perl +# $Id: cvsweb.cgi,v 4.25 2019/11/26 11:53:01 schwarze Exp $ +# $knu: cvsweb.cgi,v 1.299 2010/11/13 16:37:18 simon # # cvsweb - a CGI interface to CVS trees. # -# Written in their spare time by -# Bill Fenner (original work) -# extended by Henner Zeller , -# Henrik Nordstrom -# Ken Coar -# Dick Balaska -# Akinori MUSHA +# Written in their spare time by +# Bill Fenner (original work) +# extended by Henner Zeller , +# Henrik Nordstrom +# Ken Coar +# Dick Balaska +# Akinori MUSHA +# Jens-Uwe Mager +# Ville Skyttä +# Vassilii Khachaturov # # Based on: # * Bill Fenners cvsweb.cgi revision 1.28 available from: @@ -16,8 +21,9 @@ # # Copyright (c) 1996-1998 Bill Fenner # (c) 1998-1999 Henner Zeller -# (c) 1999 Henrik Nordstrom -# (c) 2000 Akinori MUSHA +# (c) 1999 Henrik Nordstrom +# (c) 2000-2002 Akinori MUSHA +# (c) 2002-2005 Ville Skyttä # All rights reserved. # # Redistribution and use in source and binary forms, with or without @@ -40,106 +46,249 @@ # LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY # OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF # SUCH DAMAGE. -# -# $zId: cvsweb.cgi,v 1.93 2000/07/27 17:42:28 hzeller Exp $ -# $Id: cvsweb.cgi,v 3.9 2000/07/29 12:41:25 knu Exp $ -# -### +require 5.006; + use strict; +use warnings; +use filetest qw(access); use vars qw ( - $config $allow_version_select $verbose - %CVSROOT %CVSROOTdescr %MIRRORS %DEFAULTVALUE %ICONS %MTYPES - %alltags @tabcolors %fileinfo %tags @branchnames %nameprinted - %symrev %revsym @allrevisions %date %author @revdisplayorder - @revisions %state %difflines %log %branchpoint @revorder $prcgi - @prcategories $prcategories - $checkoutMagic $doCheckout $scriptname $scriptwhere - $where $pathinfo $Browser $nofilelinks $maycompress @stickyvars - %funcline_regexp $is_mod_perl - $is_lynx $is_w3m $is_msie $is_mozilla3 $is_textbased - %input $query $barequery $sortby $bydate $byrev $byauthor - $bylog $byfile $hr_default $logsort $cvstree $cvsroot - $mimetype $defaultTextPlain $defaultViewable $allow_compress - $GZIPBIN $backicon $diricon $fileicon $fullname $newname - $cvstreedefault $body_tag $logo $defaulttitle $address - $backcolor $long_intro $short_instruction $shortLogLen - $show_author $dirtable $tablepadding $columnHeaderColorDefault - $columnHeaderColorSorted $hr_breakable $showfunc $hr_ignwhite - $hr_ignkeysubst $diffcolorHeading $diffcolorEmpty $diffcolorRemove - $diffcolorChange $diffcolorAdd $diffcolorDarkChange $difffontface - $difffontsize $inputTextSize $mime_types $allow_annotate - $allow_markup $use_java_script $open_extern_window - $extern_window_width $extern_window_height $edit_option_form - $checkout_magic $show_subdir_lastmod $show_log_in_markup $v - $navigationHeaderColor $tableBorderColor $markupLogColor - $tabstop $state $annTable $sel $curbranch @HideModules - $module $use_descriptions %descriptions @mytz $dwhere $moddate - $use_moddate + $VERSION $CheckoutMagic $MimeTypes $DEBUG + $config $allow_version_select + @CVSrepositories @CVSROOT %CVSROOT %CVSROOTdescr + %MIRRORS %DEFAULTVALUE %ICONS %MTYPES + %DIFF_COMMANDS @DIFFTYPES %DIFFTYPES @LOGSORTKEYS %LOGSORTKEYS + %alltags %fileinfo %tags @branchnames %nameprinted + %symrev %revsym @allrevisions %date %author @revdisplayorder + @revisions %state %difflines %log %branchpoint @revorder $keywordsubstitution + $mancgi $doCheckout $scriptname $scriptwhere + $where $Browser $nofilelinks $maycompress @stickyvars + $is_links $is_lynx $is_w3m $is_msie $is_mozilla3 $is_textbased + %input $query $barequery $sortby $bydate $byrev $byauthor + $bylog $byfile $defaultDiffType $logsort $cvstree $cvsroot + $charset $output_filter + @command_path %CMD $allow_compress $backicon $diricon $fileicon + $fullname $cvstreedefault $logo $defaulttitle $address $binfileicon + $long_intro $short_instruction $shortLogLen $show_author + $tablepadding $hr_breakable $showfunc $hr_ignwhite $hr_ignkeysubst + $inputTextSize $mime_types $allow_annotate $allow_markup $allow_mailtos + $allow_log_extra $allow_dir_extra $allow_source_extra + $edit_option_form + $show_subdir_lastmod $show_log_in_markup $preformat_in_markup + $tabstop $state $annTable $sel @ForbiddenFiles + $use_descriptions %descriptions $dwhere + $use_moddate $gzip_open $file_list_len + $allow_tar @tar_options @gzip_options @cvs_options + @annotate_options @rcsdiff_options + $HTML_DOCTYPE $HTML_META $cssurl $CSS ); -##### Start of Configuration Area ######## -# == EDIT this == -# User configuration is stored in -$config = defined($ENV{CVSWEB_CONFIG}) ? $ENV{CVSWEB_CONFIG} : '/usr/local/etc/cvsweb.conf'; +require Compress::Zlib; +use Cwd qw(abs_path); +use File::Path qw(rmtree); +use File::Spec::Functions qw(canonpath catdir catfile curdir devnull rootdir + tmpdir updir); +use File::Temp qw(tempdir tempfile); +use IPC::Run qw(); +use Time::Local qw(timegm); +use URI::Escape qw(uri_escape uri_unescape); -# == Configuration defaults == -# Defaults for configuration variables that shouldn't need -# to be configured.. -$allow_version_select = 1; +use constant VALID_PATH => qr/^([[:^cntrl:]]+)$/o; +use constant VALID_TAG1 => qr/^([a-zA-Z][[:graph:]]*)$/o; +use constant VALID_TAG2 => qr/^([^\$,.:;@]+)$/o; +use constant CVSWEBMARKUP => qr{^text/(x-cvsweb|vnd\.viewcvs)-markup$}io; +use constant LOG_FILESEPR => qr/^={77}$/o; +use constant LOG_REVSEPR => qr/^-{28}$/o; -##### End of Configuration Area ######## +# ----------------------------------------------------------------------------- -######## Configuration variables ######### -# These are defined to allow checking with perl -cw -%CVSROOT = %MIRRORS = %DEFAULTVALUE = %ICONS = %MTYPES = -%tags = %alltags = @tabcolors = (); -$cvstreedefault = $body_tag = $logo = $defaulttitle = $address = -$backcolor = $long_intro = $short_instruction = $shortLogLen = -$show_author = $dirtable = $tablepadding = $columnHeaderColorDefault = -$columnHeaderColorSorted = $hr_breakable = $showfunc = $hr_ignwhite = -$hr_ignkeysubst = $diffcolorHeading = $diffcolorEmpty = $diffcolorRemove = -$diffcolorChange = $diffcolorAdd = $diffcolorDarkChange = $difffontface = -$difffontsize = $inputTextSize = $mime_types = $allow_annotate = -$allow_markup = $use_java_script = $open_extern_window = -$extern_window_width = $extern_window_height = $edit_option_form = -$checkout_magic = $show_subdir_lastmod = $show_log_in_markup = $v = -$navigationHeaderColor = $tableBorderColor = $markupLogColor = -$tabstop = $use_moddate = $moddate = undef; +# All global initialization that can be done in compile time should go to +# the BEGIN block. Persistent environments, such as mod_perl, will benefit +# from this. -##### End of configuration variables ##### +BEGIN +{ + $VERSION = '3.1'; -use Time::Local; -use IPC::Open2; + $HTML_DOCTYPE = + ''; -$verbose = $v; -$checkoutMagic = "~checkout~"; -$pathinfo = defined($ENV{PATH_INFO}) ? $ENV{PATH_INFO} : ''; -$where = $pathinfo; -$doCheckout = ($where =~ /^\/$checkoutMagic/); -$where =~ s|^/($checkoutMagic)?||; -$where =~ s|/+$||; -$scriptname = defined($ENV{SCRIPT_NAME}) ? $ENV{SCRIPT_NAME} : ''; -$scriptname =~ s|^/?|/|; -$scriptname =~ s|/+$||; -$scriptwhere = $scriptname; -if ($where) { - $scriptwhere .= '/' . urlencode($where); + $HTML_META = < + + +EOM + + # Use MIME::Types for MIME type lookups if it's available. + eval { + require MIME::Types; + $MimeTypes = MIME::Types->new(only_complete => 1); + }; + $MimeTypes = undef if $@; + + $CheckoutMagic = '~checkout~'; } -$is_mod_perl = defined($ENV{MOD_PERL}); +# ----------------------------------------------------------------------------- -# in lynx, it it very annoying to have two links -# per file, so disable the link at the icon -# in this case: -$Browser = $ENV{HTTP_USER_AGENT} || ''; -$is_lynx = ($Browser =~ m`^Lynx/`i); -$is_w3m = ($Browser =~ m`^w3m/`i); -$is_msie = ($Browser =~ m`MSIE`); +sub printDiffSelect(); +sub printDiffSelectStickyVars(); +sub getDiffLinks($$$); +sub printLogSortSelect(); +sub findLastModifiedSubdirs(@); +sub htmlify_sub(&$); +sub htmlify($;$); +sub spacedHtmlText($;$); +sub link($$); +sub revcmp($$); +sub fatal($$@); +sub redirect($;$); +sub safeglob($); +sub search_path($); +sub getMimeType($;$); +sub head($;$); +sub scan_directives(@); +sub openOutputFilter(); +sub doAnnotate($$); +sub doCheckout($$$); +sub cvswebMarkup($$$$$$;$); +sub viewable($); +sub doDiff($$$$$$); +sub getDirLogs($$@); +sub readLog($;$); +sub printLog($$$;$$); +sub doLog($); +sub flush_diff_rows($$$$); +sub human_readable_diff($$); +sub navigateHeader($$$$$;$); +sub plural_write($$); +sub readableTime($$); +sub clickablePath($$); +sub chooseCVSRoot(); +sub chooseMirror(); +sub fileSortCmp(); +sub download_url($$;$); +sub download_link($$$;$); +sub display_url($$;$); +sub display_link($$;$$); +sub toggleQuery($;$); +sub htmlquote($); +sub htmlunquote($); +sub uri_escape_path($); +sub http_header(;$$); +sub html_header($;$); +sub html_footer(); +sub link_tags($); +sub forbidden($); +sub startproc(@); +sub runproc(@); +sub checkout_to_temp($$$); + +# Get rid of unsafe environment vars. Don't do this in the BEGIN block +# (think mod_perl)... +delete(@ENV{qw(PATH IFS CDPATH ENV BASH_ENV)}); + +# Location of the configuration file inside the web server chroot: +$config = '/conf/cvsweb/cvsweb.conf'; + +######## Configuration parameters ######### + +@CVSrepositories = @CVSROOT = %CVSROOT = %MIRRORS = %DEFAULTVALUE = %ICONS = + %MTYPES = %tags = %alltags = %fileinfo = %DIFF_COMMANDS = (); + +$cvstreedefault = $logo = $defaulttitle = + $address = $long_intro = $short_instruction = $shortLogLen = $show_author = + $tablepadding = $hr_breakable = $showfunc = $hr_ignwhite = + $hr_ignkeysubst = $inputTextSize = $mime_types = $allow_annotate = + $allow_markup = $allow_compress = $edit_option_form = + $show_subdir_lastmod = $show_log_in_markup = $preformat_in_markup = + $tabstop = $use_moddate = $gzip_open = $DEBUG = + $allow_tar = undef; + +$allow_version_select = $allow_mailtos = $allow_log_extra = 1; + +@DIFFTYPES = qw(h H u c); +@DIFFTYPES{@DIFFTYPES} = ( + { + 'descr' => 'colored', + 'opts' => ['-u'], + 'colored' => 1, + }, + { + 'descr' => 'long colored', + 'opts' => ['--unified=15'], + 'colored' => 1, + }, + { + 'descr' => 'unified', + 'opts' => ['-u'], + 'colored' => 0, + }, + { + 'descr' => 'context', + 'opts' => ['-c'], + 'colored' => 0, + }, +); + +@LOGSORTKEYS = qw(cvs date rev); +@LOGSORTKEYS{@LOGSORTKEYS} = ( + { descr => 'Not sorted', }, + { descr => 'Commit date', }, + { descr => 'Revision', }, +); + +##### End of configuration parameters ##### + +my $pathinfo = ''; +if (defined($ENV{PATH_INFO}) && $ENV{PATH_INFO} ne '') { + ($pathinfo) = ($ENV{PATH_INFO} =~ VALID_PATH) + or fatal('500 Internal Error', + 'Illegal PATH_INFO in environment: %s', + $ENV{PATH_INFO}); +} +if ($ENV{SCRIPT_NAME}) { + ($scriptname) = ($ENV{SCRIPT_NAME} =~ VALID_PATH) + or fatal('500 Internal Error', + 'Illegal SCRIPT_NAME in environment: %s', + $ENV{SCRIPT_NAME}); +} + +$scriptname = '' unless defined($scriptname); + +$where = $pathinfo; +$doCheckout = $where =~ s|^/$CheckoutMagic/|/|o; +$where =~ s|^/||; +$scriptname =~ s|^/+||; + +# Let's workaround thttpd's stupidity.. +if ($scriptname =~ m|/$|) { + $pathinfo .= '/'; + my $re = quotemeta $pathinfo; + $scriptname =~ s/$re$//; +} +$scriptname = "/$scriptname" if $scriptname; + +# $scriptname : the URI escaped path to this script +# $where : the path in the CVS repository (without leading /, or only /) +# $scriptwhere: the URI escaped $scriptname + '/' + $where +$scriptname = uri_escape_path($scriptname); +$scriptwhere = join('/', $scriptname, uri_escape_path($where)); +$where = '/' if ($where eq ''); + +# In text-based browsers, it's very annoying to have two links per file; +# skip linking the image for them. + +$Browser = $ENV{HTTP_USER_AGENT} || ''; +$is_links = ($Browser =~ m`^E?Links `); +$is_lynx = ($Browser =~ m`^Lynx/`i); +$is_w3m = ($Browser =~ m`^w3m/`i); +$is_msie = ($Browser =~ m`MSIE`); $is_mozilla3 = ($Browser =~ m`^Mozilla/[3-9]`); -$is_textbased = ($is_lynx || $is_w3m); +$is_textbased = ($is_links || $is_lynx || $is_w3m); $nofilelinks = $is_textbased; @@ -150,2584 +299,3667 @@ $nofilelinks = $is_textbased; # braindamaged MS-Internet Exploders claim that they # accept gzip .. but don't in fact and # display garbage then :-/ -# Turn off gzip if running under mod_perl. piping does -# not work as expected inside the server. One can probably -# achieve the same result using Apache::GZIPFilter. -$maycompress =(($ENV{HTTP_ACCEPT_ENCODING} =~ m`gzip` - || $is_mozilla3) - && !$is_msie - && !$is_mod_perl); +# Turn off gzip if running under mod_perl and no zlib is available, +# piping does not work as expected inside the server. +$maycompress = ( + ((defined($ENV{HTTP_ACCEPT_ENCODING}) + && $ENV{HTTP_ACCEPT_ENCODING} =~ /gzip/) + || $is_mozilla3) + && !$is_msie + && !(defined($ENV{MOD_PERL})) +); -# put here the variables we need in order -# to hold our state - they will be added (with -# their current value) to any link/query string -# you construct -@stickyvars = qw(cvsroot hideattic sortby logsort f only_with_tag); +# Parameters that will be sticky in all constructed links/query strings. +@stickyvars = + qw(cvsroot hideattic ignorecase sortby logsort f only_with_tag ln + hidecvsroot hidenonreadable); -if (-f $config) { - do $config; +# Load configuration. +{ + $config =~ m|^/| or fatal '500 Internal Error', + 'Configuration file name "%s" is not an absolute path.', + $config; + defined do $config and last; + $@ and fatal '500 Internal Error', + 'Error loading configuration file "%s":
%s
', + $config, $@; + fatal '500 Internal Error', + 'Cannot read configuration file "%s": %s', + $config, $! || 'unknown error'; } -else { - &fatal("500 Internal Error", - 'Configuration not found. Set the variable $config ' - . 'in cvsweb.cgi, or the environment variable ' - . 'CVSWEB_CONFIG, to your cvsweb.conf ' - . 'configuration file first.'); + +# Try to find a readable dir where we can cd into. Some abs_path() +# implementations as well as various cvs operations require such a dir to +# work properly. +{ + local $^W = 0; + for my $dir (tmpdir(), rootdir()) { + last if (-r $dir && chdir($dir)); + } } +$CSS = $cssurl ? + sprintf("\n", + htmlquote($cssurl)) : ''; + +# --- input parameters + +my %query = (); +if (defined($ENV{QUERY_STRING})) { + for my $p (split(/[;&]+/, $ENV{QUERY_STRING})) { + next unless $p; + $p =~ y/+/ /; + my ($key, $val) = split(/=/, $p, 2); + next unless defined($key); + $key = uri_unescape($key); + $key =~ /([^a-z_12-])/ and fatal('404 Not Found', + 'Invalid character "%s" in query parameter "%s"', $1, $key); + if (defined $val) { + $val = uri_unescape($val); + $val =~ /([^a-zA-Z_01-9.\/-])/ and fatal('404 Not Found', + 'Invalid character "%s" in the value "%s" of the query parameter "%s"', + $1, $val, $key); + } else { + $val = 1; + } + $query{$key} = $val; + } +} + undef %input; -$query = $ENV{QUERY_STRING}; -if ($query ne '') { - foreach (split(/&/, $query)) { - s/%(..)/sprintf("%c", hex($1))/ge; # unquote %-quoted - if (/(\S+)=(.*)/) { - $input{$1} = $2 if ($2 ne ""); - } - else { - $input{$_}++; - } +my $t; +for my $p (qw(hideattic hidecvsroot hidenonreadable ignorecase ln copt + options tarball)) { + $t = $query{$p}; + if (defined($t)) { + ($input{$p}) = ($t =~ /^([01]|on)$/) + or fatal('500 Internal Error', + 'Invalid boolean value: %s=%s', $p, $t); + } +} +for my $p (qw(annotate r1 r2 rev tr1 tr2)) { + $t = $query{$p}; + if (defined($t)) { + if (($p eq 'r1' || $p eq 'r2') && $t eq 'text') { + # Special case for the "Use text field" option in the log view diff form. + $input{$p} = $t; + next; + } elsif (($p eq 'rev' || $p eq 'annotate') && ($t eq '.' || $t eq 'HEAD')){ + # Another special case, allow linking to latest revision using these. + $input{$p} = '.'; + next; } + my ($rev, $tag) = split(/:/, $t, 2); + ($input{$p}) = ($rev =~ /^(\d+(?:\.\d+)*)$/) + or fatal('500 Internal Error', + 'Invalid revision: %s=%s', $p, $t); + if (defined($tag)) { + ($tag) = ($tag =~ VALID_TAG1) + or fatal('500 Internal Error', + 'Invalid tag/branch name in revision: %s=%s', + $p, $t); + ($tag) = ($tag =~ VALID_TAG2) + or fatal('500 Internal Error', + 'Invalid tag/branch name in revision: %s=%s', + $p, $t); + $input{$p} .= ':' . $tag; + } + } } +$t = defined($query{only_with_tag}) ? + $query{only_with_tag} : $query{only_on_branch}; # Backwards compatibility. +if (defined($t)) { + ($input{only_with_tag}) = ($t =~ VALID_TAG1) + or fatal('500 Internal Error', + 'Invalid tag/branch name: %s', $t); + ($input{only_with_tag}) = ($t =~ VALID_TAG2) + or fatal('500 Internal Error', + 'Invalid tag/branch name: %s', $t); +} +$t = $query{logsort}; +if (defined($t)) { + ($input{logsort}) = ($t =~ /^(cvs|date|rev)$/) + or fatal('500 Internal Error', + 'Unsupported log sort key: %s', $t); +} +$t = $query{f}; +if (defined($t)) { + ($input{f}) = ($t =~ /^(([hH]|[ucs]c?)|ext\d*)$/) + or fatal('500 Internal Error', + 'Unsupported diff format: %s', $t); +} +$t = $query{sortby}; +if (defined($t)) { + ($input{sortby}) = ($t =~ /^(file|date|rev|author|log)$/) + or fatal('500 Internal Error', + 'Unsupported dir sort key: %s', $t); +} +$t = $query{'content-type'}; +if (defined($t)) { + ($input{'content-type'}) = ($t =~ m|^([-0-9A-Za-z]+/[-0-9A-Za-z\.\+]+)$|) + or fatal('500 Internal Error', + 'Unsupported content type: %s', $t); +} +$t = $query{cvsroot}; +if (defined($t)) { + ($input{cvsroot}) = ($t =~ /^([[:print:]]+)$/) + or fatal('500 Internal Error', + 'Invalid symbolic CVS root name: %s', $t); +} +$t = $query{path}; +if (defined($t)) { + ($input{path}) = ($t =~ VALID_PATH) + or fatal('500 Internal Error', + 'Invalid path: %s', $t); +} +undef($t); +undef(%query); -# For backwards compability, set only_with_tag to only_on_branch if set. -$input{only_with_tag} = $input{only_on_branch} - if (defined($input{only_on_branch})); +# --- end input parameters -$DEFAULTVALUE{'cvsroot'} = $cvstreedefault; +# +# CVS roots +# +my $rootfound = 0; +for (my $i = 0; $i < scalar(@CVSrepositories); $i += 2) { + my $key = $CVSrepositories[$i]; + my ($descr, $root) = @{$CVSrepositories[$i+1]}; + $root = canonpath($root); + unless (-d $root) { + warn("Root '$root' defined in \@CVSrepositories is not a directory, " . + 'entry ignored'); + next; + } + $rootfound ||= 1; + $cvstreedefault = $key unless defined($cvstreedefault); + $CVSROOTdescr{$key} = $descr; + $CVSROOT{$key} = $root; + push(@CVSROOT, $key); +} +unless ($rootfound) { + fatal('500 Internal Error', + 'No valid CVS roots found! See @CVSrepositories in ' . + 'the configuration file (%s).', + $config); +} +undef $rootfound; -foreach (keys %DEFAULTVALUE) -{ - # replace not given parameters with the default parameters - if (!defined($input{$_}) || $input{$_} eq "") { - # Empty Checkboxes in forms return -- nothing. So we define a helper - # variable in these forms (copt) which indicates that we just set - # parameters with a checkbox - if (!defined($input{"copt"})) { - # 'copt' isn't defined --> empty input is not the result - # of empty input checkbox --> set default - $input{$_} = $DEFAULTVALUE{$_} if (defined($DEFAULTVALUE{$_})); - } - else { - # 'copt' is defined -> the result of empty input checkbox - # -> set to zero (disable) if default is a boolean (0|1). - $input{$_} = 0 - if (defined($DEFAULTVALUE{$_}) - && ($DEFAULTVALUE{$_} eq "0" || $DEFAULTVALUE{$_} eq "1")); - } - } +# +# Default CVS root +# +if (!defined($CVSROOT{$cvstreedefault})) { + fatal("500 Internal Error", + '$cvstreedefault points to a repository (%s) not ' . + 'defined in @CVSrepositories in your configuration ' . + 'file (%s).', + $cvstreedefault, + $config); } - + +$DEFAULTVALUE{cvsroot} = $cvstreedefault; + +while (my ($key, $defval) = each %DEFAULTVALUE) { + + # Replace not given parameters with defaults. + next unless (defined($defval) && $defval =~ /\S/ && !defined($input{$key})); + + # Empty checkboxes in forms return nothing, so we define a helper parameter + # in these forms (copt) which indicates that we just set parameters with a + # checkbox. + if ($input{copt}) { + + # 'copt' is set -> the result of empty input checkbox + # -> set to zero (disable) if default is a boolean (0|1). + $input{$key} = 0 if ($defval eq '0' || $defval eq '1'); + + } else { + + # 'copt' isn't set --> empty input is not the result + # of empty input checkbox --> set default. + $input{$key} = $defval; + } +} + $barequery = ""; +my @barequery; foreach (@stickyvars) { - # construct a query string with the sticky non default parameters set - if (defined($input{$_}) && $input{$_} ne '' && - !(defined($DEFAULTVALUE{$_}) && $input{$_} eq $DEFAULTVALUE{$_})) { - if ($barequery) { - $barequery = $barequery . "&"; - } - my $thisval = urlencode($_) . "=" . urlencode($input{$_}); - $barequery .= $thisval; - } + + # construct a query string with the sticky non default parameters set + if (defined($input{$_}) + && !(defined($DEFAULTVALUE{$_}) && $input{$_} eq $DEFAULTVALUE{$_})) + { + push(@barequery, join('=', uri_escape($_), uri_escape($input{$_}))); + } } + # is there any query ? -if ($barequery) { - $query = "?$barequery"; - $barequery = "&" . $barequery; +if (@barequery) { + $barequery = join (';', @barequery); + $query = "?$barequery"; + $barequery = ";$barequery"; +} else { + $query = ""; } -else { - $query = ""; +undef @barequery; + +if (defined($input{path})) { + redirect("$scriptname/$input{path}$query"); } # get actual parameters -$sortby = $input{"sortby"}; -$bydate = 0; -$byrev = 0; -$byauthor = 0; -$bylog = 0; -$byfile = 0; -if ($sortby eq "date") { +{ + my $sortby = $input{sortby} || 'file'; + $bydate = 0; + $byrev = 0; + $byauthor = 0; + $bylog = 0; + $byfile = 0; + if ($sortby eq 'date') { $bydate = 1; -} -elsif ($sortby eq "rev") { + } elsif ($sortby eq 'rev') { $byrev = 1; -} -elsif ($sortby eq "author") { + } elsif ($sortby eq 'author') { $byauthor = 1; -} -elsif ($sortby eq "log") { + } elsif ($sortby eq 'log') { $bylog = 1; -} -else { + } else { $byfile = 1; + } } -$hr_default = $input{'f'} eq 'h'; +$defaultDiffType = $input{f}; -$logsort = $input{'logsort'}; +$logsort = $input{logsort}; - -## Default CVS-Tree -if (!defined($CVSROOT{$cvstreedefault})) { - &fatal("500 Internal Error", - "\$cvstreedefault points to a repository " - . "not defined in %CVSROOT " - . "(edit your configuration file $config)"); -} - # alternate CVS-Tree, configured in cvsweb.conf -if ($input{'cvsroot'} && $CVSROOT{$input{'cvsroot'}}) { - $cvstree = $input{'cvsroot'}; +if ($input{cvsroot} && $CVSROOT{$input{cvsroot}}) { + $cvstree = $input{cvsroot}; } else { - $cvstree = $cvstreedefault; + $cvstree = $cvstreedefault; } $cvsroot = $CVSROOT{$cvstree}; # create icons out of description foreach my $k (keys %ICONS) { - no strict 'refs'; - my ($itxt,$ipath,$iwidth,$iheight) = @{$ICONS{$k}}; - if ($ipath) { - ${"${k}icon"} = "\"$itxt\""; - } - else { - ${"${k}icon"} = $itxt; - } + my ($itxt, $ipath, $iwidth, $iheight) = @{$ICONS{$k}}; + no strict 'refs'; + if ($ipath) { + ${"${k}icon"} = + sprintf('%s', + htmlquote($ipath), htmlquote($itxt), $iwidth, $iheight); + } else { + ${"${k}icon"} = $itxt; + } } +my $config_cvstree = "$config-$cvstree"; + # Do some special configuration for cvstrees -do "$config-$cvstree" if (-f "$config-$cvstree"); +if (-f $config_cvstree) { + do "$config_cvstree" + or fatal("500 Internal Error", + 'Error in loading configuration file: %s

%s
', + $config_cvstree, $@); +} +undef $config_cvstree; -$prcategories = '(?:' . join('|', @prcategories) . ')'; +$fullname = catfile($cvsroot, $where); -$fullname = $cvsroot . '/' . $where; -$mimetype = &getMimeTypeFromSuffix ($fullname); -$defaultTextPlain = ($mimetype eq "text/plain"); -$defaultViewable = $allow_markup && viewable($mimetype); - -# search for GZIP if compression allowed -# We've to find out if the GZIP-binary exists .. otherwise -# ge get an Internal Server Error if we try to pipe the -# output through the nonexistent gzip .. -# any more elegant ways to prevent this are welcome! -if ($allow_compress && $maycompress) { - foreach (split(/:/, $ENV{PATH})) { - if (-x "$_/gzip") { - $GZIPBIN = "$_/gzip"; - last; - } - } +my $rewrite = 0; +if ($pathinfo =~ m|//|) { + $pathinfo =~ y|/|/|s; + $rewrite = 1; } - if (-d $fullname) { - # - # ensure, that directories always end with (exactly) one '/' - # to allow relative URL's. If they're not, make a redirect. - ## - if (!($pathinfo =~ m|/$|) || ($pathinfo =~ m |/{2,}$|)) { - redirect ($scriptwhere . '/' . $query); - } - else { - $where .= '/'; - $scriptwhere .= '/'; - } + if ($pathinfo !~ m|/$|) { + $pathinfo .= '/'; + $rewrite = 1; + } +} elsif ($pathinfo =~ m|/$|) { + chop $pathinfo; + $rewrite = 1; } +if ($rewrite) { + redirect($scriptname . uri_escape_path($pathinfo) . $query, 1); +} +undef $rewrite; +undef $pathinfo; + if (!-d $cvsroot) { - &fatal("500 Internal Error",'$CVSROOT not found!

The server on which the CVS tree lives is probably down. Please try again in a few minutes.'); + fatal("500 Internal Error", + '$CVSROOT not found!

The server on which the CVS tree lives is probably down. Please try again in a few minutes.'); } # -# See if the module is in our forbidden list. +# Short-circuit forbidden things. Note that $fullname should not change +# after this, because the rest of the code assumes this check has already +# been done. # -$where =~ m:([^/]*):; -$module = $1; -if ($module && &forbidden_module($module)) { - &fatal("403 Forbidden", "Access to $where forbidden."); +fatal('403 Forbidden', 'Access to %s forbidden.', $where) + if forbidden($fullname); + +# +# Handle tarball downloads before any headers are output. +# +if ($input{tarball}) { + fatal('403 Forbidden', 'Downloading tarballs is prohibited.') + unless $allow_tar; + + my ($module) = ($where =~ m,^/?(.*),); # untaint + $module =~ s,/([^/]*)$,,; + my ($ext) = ($1 =~ /(\.t(?:ar\.)?gz)$/); + my ($basedir) = ($module =~ m,([^/]+)$,); + + if ($basedir eq '' || $module eq '') { + fatal('500 Internal Error', + 'You cannot download the top level directory.'); + } + + my $istar = $ext eq '.tar.gz' || $ext eq '.tgz'; + if ($istar) { + fatal('500 Internal Error', 'tar command not found.') unless $CMD{tar}; + fatal('500 Internal Error', 'gzip command not found.') unless $CMD{gzip}; + } else { + fatal('500 Internal Error', 'Unsupported archive type.'); + } + + my $tmpexportdir; + eval { + local $SIG{__DIE__}; + # Don't use the CLEANUP argument to tempdir() here, since we might be under + # mod_perl (the process runs for a long time), unlink explicitly later. + $tmpexportdir = tempdir('.cvsweb.XXXXXXXX', TMPDIR => 1); + }; + if ($@) { + fatal('500 Internal Error', 'Unable to make temporary directory: %s', $@); + } + if (!chdir($tmpexportdir)) { + fatal('500 Internal Error', + "Can't cd to temporary directory %s: %s", $tmpexportdir, $!); + } + + my @fatal; + my $tag = $input{only_with_tag} || 'HEAD'; + $tag = 'HEAD' if ($tag eq 'MAIN'); + + my @cmd = + ($CMD{cvs}, @cvs_options, '-Qd', $cvsroot, 'export', '-r', $tag, + '-d', $basedir, $module); + my $export_err; + my ($errcode, $err) = runproc(\@cmd, '2>', \$export_err); + if ($errcode) { + @fatal = + ('500 Internal Error', + 'Export failure (exit status %s), output:

%s
', + $errcode, $err || $export_err); + + } else { + + $| = 1; # Essential to get the buffering right. + local (*TAR_OUT); + + my (@cmd, $ctype); + if ($istar) { + my @tar = ($CMD{tar}, @tar_options, '-cf', '-', $basedir); + my @gzip = ($CMD{gzip}, @gzip_options, '-c'); + push(@cmd, \@tar, '|', \@gzip); + $ctype = 'application/x-gzip'; + } + push(@cmd, '>pipe', \*TAR_OUT); + + my ($h, $err) = startproc(@cmd); + if ($h) { + print "Content-Type: $ctype\r\n\r\n"; + local $/ = undef; + print ; + $h->finish(); + } else { + @fatal = ('500 Internal Error', + 'tar failure (exit status %s), output:
%s
', + $? >> 8 || -1, $err); + } + } + + # Clean up. + chdir(".."); + rmtree($tmpexportdir); + + &fatal(@fatal) if @fatal; + + exit; } + ############################## # View a directory ############################### -elsif (-d $fullname) { - my $dh = do {local(*DH);}; - opendir($dh, $fullname) || &fatal("404 Not Found","$where: $!"); - my @dir = readdir($dh); - closedir($dh); - my @subLevelFiles = findLastModifiedSubdirs(@dir) - if ($show_subdir_lastmod); - getDirLogs($cvsroot,$where,@subLevelFiles); +if (-d $fullname) { - if ($where eq '/') { - html_header($defaulttitle); - $long_intro =~ s/!!CVSROOTdescr!!/$CVSROOTdescr{$cvstree}/g; - print $long_intro; - } - else { - html_header($where); - print $short_instruction; - } + my $dh = do { local (*DH); }; + opendir($dh, $fullname) or fatal("404 Not Found", '%s: %s', $where, $!); + my @dir = grep(!forbidden(catfile($fullname, $_)), readdir($dh)); + closedir($dh); + my @subLevelFiles = findLastModifiedSubdirs(@dir) if $show_subdir_lastmod; + my @unreadable = getDirLogs($cvsroot, $where, @subLevelFiles); - my $descriptions; - if (($use_descriptions) && open (DESC, "<$cvsroot/CVSROOT/descriptions")) { - while () { - chomp; - my ($dir,$description) = /(\S+)\s+(.*)/; - $descriptions{$dir} = $description; - } - } + if ($where eq '/') { + html_header($defaulttitle); + $long_intro =~ s/!!CVSROOTdescr!!/$CVSROOTdescr{$cvstree}/g; + print $long_intro; + } else { + html_header($where); + my $html = (-f catfile($fullname, 'README.cvs.html,v') || + -f catfile($fullname, 'Attic', 'README.cvs.html,v')); + my $text = (!$html && + (-f catfile($fullname, 'README.cvs,v') || + -f catfile($fullname, 'Attic', 'README.cvs,v'))); + if ($html || $text) { + my $rev = $input{only_with_tag} || 'HEAD'; + my $cr = abs_path($cvsroot) || $cvsroot; + my $co = "$where/README.cvs.html" if $html; + $co ||= "$where/README.cvs" if $text; + # abs_path() taints when run as a CGI... + if ($cr =~ VALID_PATH) { + $cr = $1; + } else { + fatal('500 Internal Error', 'Illegal CVS root: %s', $cr); + } + my @cmd = ($CMD{cvs}, @cvs_options, '-d', $cr, 'co', '-p', "-r$rev",$co); + local (*CVS_OUT, *CVS_ERR); + my ($h, $err) = startproc(\@cmd, \"", '>pipe', \*CVS_OUT, + '2>pipe', \*CVS_ERR); + fatal('500 Internal Error', $err) unless $h; + if ($html) { + local $/ = undef; + print ; + } else { + print "

\n"; + while () { + chomp; + print htmlquote($_), '
'; + } + print "

"; + } + $h->finish(); + } + print $short_instruction; + } - print "

\n"; - # give direct access to dirs - if ($where eq '/') { - chooseMirror(); - chooseCVSRoot(); - } - else { - print "

Current directory: ", &clickablePath($where,0), "\n"; + if ($use_descriptions && + open(DESC, catfile($cvsroot, 'CVSROOT', 'descriptions'))) { + while () { + chomp; + my ($dir, $description) = /(\S+)\s+(.*)/; + $descriptions{$dir} = $description; + } + close(DESC); + } - print "

Current tag: ", $input{only_with_tag}, "\n" if - $input{only_with_tag}; + print "

\n"; - } - + # give direct access to dirs + if ($where eq '/') { + chooseMirror(); + chooseCVSRoot(); - print "
\n"; - # Using in this manner violates the HTML2.0 spec but - # provides the results that I want in most browsers. Another - # case of layout spooging up HTML. - - my $infocols = 0; - if ($dirtable) { - if (defined($tableBorderColor)) { - # Can't this be done by defining the border for the inner table? - print "
"; - } - print "\n"; - $infocols++; - print ""; - # do not display the other column-headers, if we do not have any files - # with revision information: - if (scalar(%fileinfo)) { - $infocols++; - print ""; - $infocols++; - print ""; - if ($show_author) { - $infocols++; - print ""; - } - $infocols++; - print ""; - } - elsif ($use_descriptions) { - print "\n"; - } - else { - print "\n"; - } - my $dirrow = 0; - - my $i; - lookingforattic: - for ($i = 0; $i <= $#dir; $i++) { - if ($dir[$i] eq "Attic") { - last lookingforattic; - } - } - if (!$input{'hideattic'} && ($i <= $#dir) && - opendir($dh, $fullname . "/Attic")) { - splice(@dir, $i, 1, - grep((s|^|Attic/|,!m|/\.|), readdir($dh))); - closedir($dh); - } + } else { + print '

Current directory: ', clickablePath($where, 0), ''; + print "

\n"; + print "

Current tag: ", htmlquote($input{only_with_tag}), "

\n" + if $input{only_with_tag}; + } - my $hideAtticToggleLink = "[Hide]" if (!$input{'hideattic'}); + print "
\n"; - # Sort without the Attic/ pathname. - # place directories first + my $infocols = 1; - my $attic; - my $url; - my $fileurl; - my $filesexists; - my $filesfound; + printf(< +
+EOF + printf('\n"; - # Check whether to show the CVSROOT path - next if ($input{'hidecvsroot'} && ($_ eq 'CVSROOT')); + # Do not display the other column headers if we do not have any files + # with revision information. + if (scalar(%fileinfo)) { + $infocols++; + printf('', ($byrev ? ' class="sorted"' : '')); - # Check whether the module is in the restricted list - next if ($_ && &forbidden_module($_)); + if ($byrev) { + print 'Rev.'; + } else { + print &link('Rev.', + sprintf('./%s#dirlist', toggleQuery('sortby', 'rev'))); + } + print "\n"; + $infocols++; + printf('', ($bydate ? ' class="sorted"' : '')); - # Ignore non-readable files - next if ($input{'hidenonreadable'} && !(-r "$fullname/$_")); + if ($bydate) { + print 'Age'; + } else { + print &link('Age', + sprintf('./%s#dirlist', toggleQuery('sortby', 'date'))); + } + print "\n"; - if (s|^Attic/||) { - $attic = " (in the Attic) " . $hideAtticToggleLink; - } - else { - $attic = ""; - } + if ($show_author) { + $infocols++; + printf('', ($byauthor ? ' class="sorted"' : '')); - if ($_ eq '..' || -d "$fullname/$_") { - next if ($_ eq '..' && $where eq '/'); - my ($rev,$date,$log,$author,$filename) = @{$fileinfo{$_}} - if (defined($fileinfo{$_})); - print "\n"; - } - else { - print "
\n"; - } - $dirrow++; - } - elsif (s/,v$//) { - $fileurl = ($attic ? "Attic/" : "") . urlencode($_); - $url = $fileurl . $query; - my $rev = ''; - my $date = ''; - my $log = ''; - my $author = ''; - $filesexists++; - next if (!defined($fileinfo{$_})); - ($rev,$date,$log,$author) = @{$fileinfo{$_}}; - $filesfound++; - print "" if ($dirtable); - print (($dirtable) ? "" : "
"); - $dirrow++; - } - print "\n"; - } - if ($dirtable && defined($tableBorderColor)) { - print "
"; - print "" if (!$byfile); - print "File"; - print "" if (!$byfile); - print ""; - print "" if (!$byrev); - print "Rev."; - print "" if (!$byrev); - print ""; - print "" if (!$bydate); - print "Age"; - print "" if (!$bydate); - print ""; - print "" if (!$byauthor); - print "Author"; - print "" if (!$byauthor); - print ""; - print "" if (!$bylog); - print "Last log entry"; - print "" if (!$bylog); - print ""; - print "Description"; - $infocols++; - } - print "
', ($byfile ? ' class="sorted"' : '')); - foreach (sort { &fileSortCmp } @dir) { - if ($_ eq '.') { - next; - } - # ignore CVS lock and stale NFS files - next if (/^#cvs\.|^,|^\.nfs/); + if ($byfile) { + print 'File'; + } else { + print &link('File', + sprintf('./%s#dirlist', toggleQuery('sortby', 'file'))); + } + print "
" if ($dirtable); - if ($_ eq '..') { - $url = "../" . $query; - if ($nofilelinks) { - print $backicon; - } - else { - print &link($backicon,$url); - } - print " ", &link("Previous Directory",$url); - } - else { - $url = urlencode($_) . '/' . $query; - print ""; - if ($nofilelinks) { - print $diricon; - } - else { - print &link($diricon,$url); - } - print " ", &link($_ . "/", $url), $attic; - if ($_ eq "Attic") { - print "  [Don't hide]"; - } - } - # Show last change in dir - if ($filename) { - print "  " if ($dirtable); - if ($date) { - print " " . readableTime(time() - $date,0) . ""; - } - if ($show_author) { - print " " if ($dirtable); - print $author; - } - print " " if ($dirtable); - $filename =~ s%^[^/]+/%%; - print "$filename/$rev"; - print "
" if ($dirtable); - if ($log) { - print " " - . &htmlify(substr($log,0,$shortLogLen)); - if (length $log > 80) { - print "..."; - } - print ""; - } - } - else { - my ($dwhere) = ($where ne "/" ? $where : "") . $_; - if ($use_descriptions && defined $descriptions{$dwhere}) { - print "
 " if $dirtable; - print $descriptions{$dwhere}; - } elsif ($dirtable && $infocols > 1) { - # close the row with the appropriate number of - # columns, so that the vertical seperators are visible - my($cols) = $infocols; - while ($cols > 1) { - print " "; - $cols--; - } - } - } - if ($dirtable) { - print "
" if ($dirtable); - print ""; - if ($nofilelinks) { - print $fileicon; - } - else { - print &link($fileicon,$url); - } - print " ", &link($_, $url), $attic; - print " " if ($dirtable); - download_link($fileurl, - $rev, $rev, - $defaultViewable ? "text/x-cvsweb-markup" : undef); - print " " if ($dirtable); - if ($date) { - print " " . readableTime(time() - $date,0) . ""; - } - if ($show_author) { - print " " if ($dirtable); - print $author; - } - print " " if ($dirtable); - if ($log) { - print " " . &htmlify(substr($log,0,$shortLogLen)); - if (length $log > 80) { - print "..."; - } - print ""; - } - print "
"; - } - print "". ($dirtable == 1) ? "
" : "
" . "\n"; - - if ($filesexists && !$filesfound) { - print "

NOTE: There are $filesexists files, but none matches the current tag ($input{only_with_tag})\n"; - } - if ($input{only_with_tag} && (!%tags || !$tags{$input{only_with_tag}})) { - %tags = %alltags - } - if (scalar %tags - || $input{only_with_tag} - || $edit_option_form - || defined($input{"options"})) { - print "


"; - } + if ($byauthor) { + print 'Author'; + } else { + print + &link('Author', + sprintf('./%s#dirlist', toggleQuery('sortby', 'author'))); + } + print "\n"; + } + $infocols++; + printf('', ($bylog ? ' class="sorted"' : '')); - if (scalar %tags || $input{only_with_tag}) { - print "
\n"; - foreach my $var (@stickyvars) { - print "\n" - if (defined($input{$var}) - && $input{$var} ne $DEFAULTVALUE{$var} - && $input{$var} ne "" - && $var ne "only_with_tag"); - } - print "Show only files with tag:\n"; - print "\n"; - print "\n"; - print "
\n"; - } - my $formwhere = $scriptwhere; - $formwhere =~ s|Attic/?$|| if ($input{'hideattic'}); + if ($bylog) { + print 'Last log entry'; + } else { + print &link('Last log entry', + sprintf('./%s#dirlist', toggleQuery('sortby', 'log'))); + } + print "\n"; + } elsif ($use_descriptions) { + print "Description\n"; + $infocols++; + } + print "\n"; - if ($edit_option_form || defined($input{"options"})) { - print "
\n"; - print "\n"; - if ($cvstree ne $cvstreedefault) { - print "\n"; - } - print "
"; - print ""; - print ""; - print ""; - print ""; - print "\n"; - print "
Preferences
Sort files by revisions by: \n"; - print "
Diff format: "; - printDiffSelect(); - print "Show Attic files: "; - print "
"; - print "
\n"; - } - print &html_footer; - print "\n"; - } + my $dirrow = 0; + my $i; + lookingforattic: + for ($i = 0; $i <= $#dir; $i++) { + if ($dir[$i] eq "Attic") { + last lookingforattic; + } + } + + if (!$input{hideattic} + && ($i <= $#dir) + && opendir($dh, $fullname . '/Attic')) + { + splice(@dir, $i, 1, grep((s|^|Attic/|, !m|/\.|), readdir($dh))); + closedir($dh); + } + + my $hideAtticToggleLink = + $input{hideattic} + ? '' + : &link('[hide]', sprintf('./%s#dirlist', &toggleQuery('hideattic'))); + + # Sort without the Attic/ pathname. + # place directories first + + my $filesexists; + my $filesfound; + + foreach my $file (sort { &fileSortCmp } @dir) { + + next if ($file eq curdir()); + + # ignore CVS lock and stale NFS files + next if ($file =~ /^\#cvs\.|^,|^\.nfs/); # \# for XEmacs cperl-mode... + + # Check whether to show the CVSROOT path + next if ($input{hidecvsroot} && $where eq '/' && $file eq 'CVSROOT'); + + # Is it a directory? + my $isdir = -d catdir($fullname, $file); + + # Ignore non-readable files and directories? + next if ($input{hidenonreadable} && (! -r _ || ($isdir && ! -x _))); + + my $attic = ''; + if ($file =~ s|^Attic/||) { + $attic = ' (in the Attic) ' . + $hideAtticToggleLink . ''; + } + + if ($file eq updir() || $isdir) { + next if ($file eq updir() && $where eq '/'); + my ($rev, $date, $log, $author, $filename, $keywordsubst) = + @{$fileinfo{$file}} if (defined($fileinfo{$file})); + printf "\n", + ($dirrow % 2) ? 'even' : 'odd'; + + if ($file eq updir()) { + my $url = "../$query"; + print $nofilelinks ? $backicon : &link($backicon, $url); + print ' ', &link("Parent Directory", $url); + + } else { + my $url = './' . uri_escape_path($file) . "/$query"; + print ''; + print $nofilelinks ? $diricon : &link($diricon, $url); + print ' ', &link(htmlquote("$file/"), $url), $attic; + if ($file eq "Attic") { + print ' ', + &link('[show]', + sprintf('./%s#dirlist', &toggleQuery('hideattic'))), + ''; + } + } + + # Show last change in dir + if ($filename) { + my $ageclass = 'age'; + my $age = ''; + if ($date) { + $age = readableTime(time() - $date, 0); + $ageclass .= " $1" if ($age =~ /^\d+ ([a-z]+)/); + } + print "\n \n$age"; + print "\n", htmlquote($author) + if $show_author; + print "\n"; + $filename =~ s%^[^/]+/%%; + print &link(htmlquote("$filename/$rev"), + sprintf('%s/%s%s#rev%s', + uri_escape($file), uri_escape($filename), + $query, $rev)), '
'; + if ($log) { + print htmlify(substr($log, 0, $shortLogLen), $allow_dir_extra); + print '...' if (length($log) > 80); + } + + } else { + my $dwhere = ($where ne '/' ? $where : '') . $file; + + if ($use_descriptions && defined $descriptions{$dwhere}) { + print ''; + print $descriptions{$dwhere}; + + } elsif ($infocols > 1) { + + # close the row with the appropriate number of + # columns, so that the vertical seperators are visible + my ($cols) = $infocols; + while ($cols > 1) { + print "\n "; + $cols--; + } + } + } + + print "\n\n"; + $dirrow++; + + } elsif ($file =~ s/,v$//) { + + my $fileurl = ($attic ? 'Attic/' : '') . uri_escape_path($file); + my $url = './' . $fileurl . $query; + $filesexists++; + next if (!defined($fileinfo{$file})); + my ($rev, $date, $log, $author, $filename, $keywordsubst) = + @{$fileinfo{$file}}; + my $isbinary = $keywordsubst eq 'b' ? 1 : 0; + $filesfound++; + + printf "\n", ($dirrow % 2) ? 'even' : 'odd'; + printf ''; + + my $icon = $isbinary ? $binfileicon : $fileicon; + print $nofilelinks ? $icon : &link($icon, $url); + print ' ', &link(htmlquote($file), $url), $attic; + print "\n", display_link($fileurl, $rev); + my $ageclass = 'age'; + my $age = ''; + if ($date) { + $age = readableTime(time() - $date, 0); + $ageclass .= " $1" if ($age =~ /^\d+ ([a-z]+)/); + } + print "\n$age"; + print "\n", htmlquote($author) if $show_author; + print "\n"; + + if ($log) { + print htmlify(substr($log, 0, $shortLogLen), $allow_dir_extra); + print '...' if (length $log > 80); + } + print "\n"; + $dirrow++; + } + print "\n"; + } + + print "\n"; + + if ((my $num = scalar(@unreadable)) && ! $input{hidenonreadable}) { + printf(< + NOTE: The following %d unreadable files were ignored:
+ %s +

+EOF + } + + if ($filesexists && !$filesfound) { + my $currtag = defined($input{only_with_tag}) ? + sprintf(' (%s)', htmlquote($input{only_with_tag})) : ''; + printf(< + NOTE: There are %d files, but none matches the current tag%s. +

+EOF + } + + if ($input{only_with_tag} && (!%tags || !$tags{$input{only_with_tag}})) { + %tags = %alltags; + } + + if (scalar %tags + || $input{only_with_tag} + || $edit_option_form + || defined($input{options})) + { + print "
\n"; + } + + if (scalar %tags || $input{only_with_tag}) { + print "
\n

\n"; + foreach my $var (@stickyvars) { + printf("\n", + $var, htmlquote($input{$var})) + if (defined($input{$var}) + && (!defined($DEFAULTVALUE{$var}) + || $input{$var} ne $DEFAULTVALUE{$var}) + && $var ne 'only_with_tag'); + } + print < + + + +

+
+EOF + } + + if ($allow_tar && $filesfound) { + my ($basefile) = ($where =~ m,(?:.*/)?([^/]+),); + my $havetar = $CMD{tar} && $CMD{gzip}; + if (defined($basefile) && $basefile ne '' && $havetar) { + my $q = ($query ? "$query;" : '?') . 'tarball=1'; + print "
\n", + '
Download this directory in '; + # Mangle the filename so browsers show a reasonable filename to download. + $basefile = uri_escape($basefile); + print &link('tarball', "$basefile.tar.gz$q"); + print "
\n"; + } + } + + if ($edit_option_form || defined($input{options})) { + + print < +
+General options + +EOF + for my $v (qw(hidecvsroot hidenonreadable)) { + printf(qq{\n}, + $v, $input{$v} || 0); + } + if ($cvstree ne $cvstreedefault) { + print "\n"; + } + print < + + + + + +\n"; + print < + + + + +EOF + print ''; + print < + + + + + + +EOF + printLogSortSelect(); + print < + + + + +EOF + print '\n"; + print < + + + + + + +EOF + printDiffSelect(); + print < + + + + + +
+ +EOF + } + html_footer(); +} + ############################### # View Files ############################### - elsif (-f $fullname . ',v') { - if (defined($input{'rev'}) || $doCheckout) { - &doCheckout($fullname, $input{'rev'}); - exit; - } - if (defined($input{'annotate'}) && $allow_annotate) { - &doAnnotate($input{'annotate'}); - exit; - } - if (defined($input{'r1'}) && defined($input{'r2'})) { - &doDiff($fullname, $input{'r1'}, $input{'tr1'}, - $input{'r2'}, $input{'tr2'}, $input{'f'}); - exit; - } - print("going to dolog($fullname)\n") if ($verbose); - &doLog($fullname); +elsif (-f $fullname . ',v') { + + if (defined($input{rev}) || $doCheckout) { + &doCheckout($fullname, $input{rev}, $input{only_with_tag}); + gzipclose(); + exit; + } + + if (defined($input{annotate}) && $allow_annotate) { + &doAnnotate($input{annotate}, $input{only_with_tag}); + gzipclose(); + exit; + } + + if (defined($input{r1}) && defined($input{r2})) { + &doDiff($fullname, $input{r1}, $input{tr1}, + $input{r2}, $input{tr2}, $input{f}); + gzipclose(); + exit; + } + + &doLog($fullname); +} + ############################## # View Diff ############################## - } - elsif ($fullname =~ s/\.diff$// && -f $fullname . ",v" && - $input{'r1'} && $input{'r2'}) { +elsif ($fullname =~ s/\.diff$// + && -f $fullname . ',v' && $input{r1} && $input{r2}) +{ - # $where-diff-removal if 'cvs rdiff' is used - # .. but 'cvs rdiff'doesn't support some options - # rcsdiff does (-w and -p), so it is disabled - # $where =~ s/\.diff$//; + # $where-diff-removal if 'cvs rdiff' is used + # .. but 'cvs rdiff'doesn't support some options + # rcsdiff does (-w and -p), so it is disabled + # $where =~ s/\.diff$//; - # Allow diffs using the ".diff" extension - # so that browsers that default to the URL - # for a save filename don't save diff's as - # e.g. foo.c - &doDiff($fullname, $input{'r1'}, $input{'tr1'}, - $input{'r2'}, $input{'tr2'}, $input{'f'}); - exit; + # Allow diffs using the ".diff" extension so that browsers that default + # to the filename in the URL when saving don't save diffs as eg. foo.c. + &doDiff($fullname, $input{r1}, $input{tr1}, + $input{r2}, $input{tr2}, $input{f}); + gzipclose(); + exit; + +} + +elsif (do { (my $tmp = $fullname) =~ s|/([^/]+)$|/Attic/$1|; -f "$tmp,v" }) { + # The file has been removed and is in the Attic. + # Send a redirect pointing to the file in the Attic. + (my $newplace = $scriptwhere) =~ s|/([^/]+)$|/Attic/$1|; + if ($ENV{QUERY_STRING} ne "") { + redirect("$newplace?$ENV{QUERY_STRING}"); + } else { + redirect($newplace); + } + exit; + +} + +elsif (0 && (my @files = &safeglob($fullname . ",v"))) { + http_header("text/plain"); + print "You matched the following files:\n"; + print join ("\n", @files); + + # TODO: + # Find the tags from each file + # Display a form offering diffs between said tags +} + +else { + # Assume it's a module name with a potential path following it. + my $module; + my $xtra = (($module = $where) =~ s|(/.*)||) ? $1 : ''; + + # Is there an indexed version of modules? + my $fh = do { local (*FH); }; + if (open($fh, catfile($cvsroot, 'CVSROOT', 'modules'))) { + while (<$fh>) { + if (/^(\S+)\s+(\S+)/o + && $module eq $1 + && $module ne $2 + && -d "$cvsroot/$2") + { + close($fh); + redirect("$scriptname/$2$xtra$query"); + } } - elsif (($newname = $fullname) =~ s|/([^/]+)$|/Attic/$1| && - -f $newname . ",v") { - # The file has been removed and is in the Attic. - # Send a redirect pointing to the file in the Attic. - (my $newplace = $scriptwhere) =~ s|/([^/]+)$|/Attic/$1|; - &redirect($newplace); - exit; - } - elsif (0 && (my @files = &safeglob($fullname . ",v"))) { - http_header("text/plain"); - print "You matched the following files:\n"; - print join("\n", @files); - # Find the tags from each file - # Display a form offering diffs between said tags - } - else { - my $fh = do {local(*FH);}; - my ($xtra, $module); - # Assume it's a module name with a potential path following it. - $xtra = $& if (($module = $where) =~ s|/.*||); - # Is there an indexed version of modules? - if (open($fh, "$cvsroot/CVSROOT/modules")) { - while (<$fh>) { - if (/^(\S+)\s+(\S+)/o && $module eq $1 - && -d "${cvsroot}/$2" && $module ne $2) { - &redirect($scriptname . '/' . $2 . $xtra); - } - } - } - &fatal("404 Not Found","$where: no such file or directory"); - } + close($fh); + } + fatal("404 Not Found", '%s: no such file or directory', $where); +} + +gzipclose(); + ## End MAIN -sub printDiffSelect { - my ($use_java_script) = @_; - $use_java_script = 0 if (!defined($use_java_script)); - my ($f) = $input{'f'}; - print ""; + +sub printDiffSelect() +{ + print '"; } -sub findLastModifiedSubdirs { - my (@dirs) = @_; - my ($dirname, @files); - foreach $dirname (@dirs) { - next if ($dirname eq "."); - next if ($dirname eq ".."); - my ($dir) = "$fullname/$dirname"; - next if (!-d $dir); +sub printDiffSelectStickyVars() +{ + while (my ($key, $val) = each %input) { + next if ($key eq 'f'); + next if (defined($DEFAULTVALUE{$key}) && $DEFAULTVALUE{$key} eq $val); + print "\n"; + } +} - my ($lastmod) = undef; - my ($lastmodtime) = undef; - my $dh = do {local(*DH);}; - opendir($dh,$dir) || next; - my (@filenames) = readdir($dh); - closedir($dh); +sub printLogSortSelect() +{ + print '"; +} + + +# +# Find the last modified, version controlled files in the given directories. +# Compares solely based on modification timestamps. Files in the returned list +# are without the ,v suffix, and unreadable files have been filtered out. +# +sub findLastModifiedSubdirs(@) +{ + my (@dirs) = @_; + + my @files; + foreach my $dirname (@dirs) { + next if ($dirname eq curdir() || $dirname eq updir()); + my $dir = catdir($fullname, $dirname); + next if (!-d $dir); + + my $dh = do { local (*DH); }; + opendir($dh, $dir) or next; + my (@filenames) = grep(!forbidden(catfile($dir, $_)), readdir($dh)); + closedir($dh); + + my $lastmod = undef; + my $lastmodtime = undef; + foreach my $filename (@filenames) { + ($filename) = + (catfile($dirname, $filename) =~ VALID_PATH) or next; # untaint + my ($file) = catfile($fullname, $filename); + next if ($filename !~ /,v$/o || !-f $file || !-r _); + my $modtime = -M _; + if (!defined($lastmod) || $modtime < $lastmodtime) { + ($lastmod = $filename) =~ s/,v$//; + $lastmodtime = $modtime; + } } - return @files; + push(@files, $lastmod) if (defined($lastmod)); + } + return @files; } -sub htmlify { - my($string, $pr) = @_; - # Special Characters; RFC 1866 - $string =~ s/&/&/g; - $string =~ s/\"/"/g; - $string =~ s//>/g; +sub htmlify_sub(&$) +{ + (my $proc, local $_) = @_; + my @a = split(m|(]+>[^<]*)|i); + my $linked; + my $result = ''; - # get URL's as link .. - $string =~ s`(http|ftp|https)(://[-a-zA-Z0-9%.~:_/]+)([?&]([-a-zA-Z0-9%.~:_]+)=([-a-zA-Z0-9%.~:_])+)*`$1$2$3`; - # get e-mails as link - $string =~ s`([-a-zA-Z0-9_.]+@([-a-zA-Z0-9]+\.)+[A-Za-z]{2,4})`$1`; + while (($_, $linked) = splice(@a, 0, 2)) { + &$proc(); + $result .= $_ if defined($_); + $result .= $linked if defined($linked); + } - # get #PR as link .. - if ($pr && defined($prcgi)) { - 1 while $string =~ s`\b(pr[:#]?\s*(?:#?\d+[,\s]\s*)*#?)(\d+)\b`$1$2`i; - $string =~ s`\b${prcategories}/(\d+)\b`$&`igo; - } + return $result; +} - return $string; + +sub htmlify($;$) +{ + (local $_, my $extra) = @_; + + $_ = htmlquote($_); + + # get URL's as link + s{ + ((https?|ftp)://.+?)([\s\']|&(quot|[lg]t);) + }{ + &link($1, htmlunquote($1)) . $3 + }egx; + + if ($allow_mailtos) { + # Make mailto: links from email addresses. + $_ = htmlify_sub { + s< + ([\w+=\-.!]+@[\w\-]+(?:\.[\w\-]+)+) + >< + &link($1, "mailto:$1") + >egix; + } $_; + } + + if ($extra) { + # get manpage specs as link: "foo.1" "foo(1)" + if (defined($mancgi)) { + $_ = htmlify_sub { + s{ + ( + \b ( \w[\w+\-.]* (?: ::\w[\w+\-.]*)* ) + (?: + \( ([0-9n]) \) \B + | + \. ([0-9n]) \b + ) + ) + }{ + my($text, $name, $section) = ($1, $2, defined($3) ? $3 : $4); + ($name =~ /[A-Za-z]/ && $name !~ /\.(:|$)/) + ? &link($text, sprintf($mancgi, uri_escape($name), $section)) + : $text; + }egx; + } $_; + } + } + + return $_; } -sub spacedHtmlText { - my($string, $pr) = @_; - # Cut trailing spaces - s/\s+$//; +sub spacedHtmlText($;$) +{ + (local $_, my $ts) = @_; + return '' unless defined($_); + $ts ||= $tabstop || 8; - # Expand tabs - $string =~ s/\t+/' ' x (length($&) * $tabstop - length($`) % $tabstop)/e - if (defined($tabstop)); + # Expand tabs + 1 while s/(.*?)(\t+)/$1 . ' ' x (length($2) * $ts - length($1) % $ts)/e; - # replace and (\001 is to protect us from htmlify) - # gzip can make excellent use of this repeating pattern :-) - $string =~ s/\001/\001%/g; #protect our & substitute - if ($hr_breakable) { - # make every other space 'breakable' - $string =~ s/ / \001nbsp; \001nbsp; \001nbsp; \001nbsp;/g; # - $string =~ s/ / \001nbsp;/g; # 2 * - # leave single space as it is - } - else { - $string =~ s/ /\001nbsp;\001nbsp;\001nbsp;\001nbsp;\001nbsp;\001nbsp;\001nbsp;\001nbsp;/g; - $string =~ s/ /\001nbsp;/g; - } + if ($hr_breakable) { + s/^ /\001nbsp;/; # protect leading and... + s/ $/\001nbsp;/; # ...trailing whitespace (mostly for String::Ediff), + s/ / \001nbsp;/g; # ...and leave every other space 'breakable' + } else { + s/ /\001nbsp;/g; + } - $string = htmlify($string); + $_ = htmlify($_, $allow_source_extra); - # unescape - $string =~ s/\001([^%])/&$1/g; - $string =~ s/\001%/\001/g; + # unescape + y/\001/&/; - return $string; + return $_; } -sub link { - my($name, $where) = @_; - return "$name\n"; +# Note that this doesn't htmlquote the first argument... +sub link($$) +{ + my ($name, $url) = @_; + return sprintf('%s', htmlquote($url), $name); } -sub revcmp { - my($rev1, $rev2) = @_; - my(@r1) = split(/\./, $rev1); - my(@r2) = split(/\./, $rev2); - my($a,$b); - while (($a = shift(@r1)) && ($b = shift(@r2))) { - if ($a != $b) { - return $a <=> $b; - } - } - if (@r1) { return 1; } - if (@r2) { return -1; } - return 0; +sub revcmp($$) +{ + my ($rev1, $rev2) = @_; + + # make no comparison for a tag or a branch + return 0 if $rev1 =~ /[^\d.]/ || $rev2 =~ /[^\d.]/; + + my (@r1) = split(/\./, $rev1); + my (@r2) = split(/\./, $rev2); + my ($a, $b); + + while (($a = shift(@r1)) && ($b = shift(@r2))) { + return $a <=> $b unless ($a == $b); + } + if (@r1) { return 1; } + if (@r2) { return -1; } + return 0; } -sub fatal { - my($errcode, $errmsg) = @_; - if ($is_mod_perl) { - Apache->request->status((split(/ /, $errcode))[0]); - } - else { - print "Status: $errcode\r\n"; - } - html_header("Error"); - print "Error: $errmsg\n"; - print &html_footer; - exit(1); + +# +# Signal a fatal error. +# +sub fatal($$@) +{ + my ($errcode, $format, @args) = @_; + print "Status: $errcode\r\n"; + html_header('Error'); + print '
Error: ', + sprintf($format, map(htmlquote($_), @args)), "
\n"; + html_footer(); + exit(1); } -sub redirect { - my($url) = @_; - if ($is_mod_perl) { - Apache->request->status(301); - Apache->request->header_out(Location => $url); - } - else { - print "Status: 301 Moved\r\n"; - print "Location: $url\r\n"; - } - html_header("Moved"); - print "This document is located here.\n"; - print &html_footer; - exit(1); + +# +# Sends a redirect to the given URL. +# +sub redirect($;$) +{ + my ($url, $permanent) = @_; + my ($status, $text); + if ($permanent) { + $status = '301'; + $text = 'Moved Permanently'; + } else { + $status = '302'; + $text = 'Found'; + } + print "Status: $status $text\r\n", "Location: $url\r\n"; + html_header($text); + print "

This document has moved ", &link('here', $url), ".

\n"; + html_footer(); + exit(1); } -sub safeglob { - my ($filename) = @_; - my ($dirname); - my (@results); - my $dh = do {local(*DH);}; - ($dirname = $filename) =~ s|/[^/]+$||; - $filename =~ s|.*/||; +sub safeglob($) +{ + my ($filename) = @_; - if (opendir($dh, $dirname)) { - my $glob = $filename; - my $t; - # transform filename from glob to regex. Deal with: - # [, {, ?, * as glob chars - # make sure to escape all other regex chars - $glob =~ s/([\.\(\)\|\+])/\\$1/g; - $glob =~ s/\*/.*/g; - $glob =~ s/\?/./g; - $glob =~ s/{([^}]+)}/($t = $1) =~ s-,-|-g; "($t)"/eg; - foreach (readdir($dh)) { - if (/^${glob}$/) { - push(@results, $dirname . "/" .$_); - } - } - } + (my $dirname = $filename) =~ s|/[^/]+$||; + $filename =~ s|.*/||; - @results; + my @results; + my $dh = do { local (*DH); }; + if (opendir($dh, $dirname)) { + my $glob = $filename; + my $t; + + # transform filename from glob to regex. Deal with: + # [, {, ?, * as glob chars + # make sure to escape all other regex chars + $glob =~ s/([\.\(\)\|\+])/\\$1/g; + $glob =~ s/\*/.*/g; + $glob =~ s/\?/./g; + $glob =~ s/{([^}]+)}/($t = $1) =~ s-,-|-g; "($t)"/eg; + $glob = qr/^$glob$/; + + foreach (readdir($dh)) { + if ($_ =~ $glob && $_ =~ VALID_PATH) { + push(@results, catfile($dirname, $1)); # untaint + } + } + closedir($dh); + } + + return @results; } -sub getMimeTypeFromSuffix { - my ($fullname) = @_; - my ($mimetype, $suffix); - my $fh = do {local(*FH);}; - ($suffix = $fullname) =~ s/^.*\.([^.]*)$/$1/; - $mimetype = $MTYPES{$suffix}; - $mimetype = $MTYPES{'*'} if (!$mimetype); - - if (!$mimetype && -f $mime_types) { - # okey, this is something special - search the - # mime.types database - open ($fh, "<$mime_types"); - while (<$fh>) { - if ($_ =~ /^\s*(\S+\/\S+).*\b$suffix\b/) { - $mimetype = $1; - last; - } - } - close ($fh); +# +# Searches @command_path for the given executable file. +# +sub search_path($) +{ + my ($command) = @_; + for my $d (@command_path) { + my $cmd = catfile($d, $command); + return $cmd if (-x $cmd && !-d _); + } + return ''; +} + + +# +# Gets the MIME type for the given file name. +# +sub getMimeType($;$) +{ + my ($fullname, $binary) = @_; + $binary = ($keywordsubstitution && $keywordsubstitution =~ /b/) + unless defined($binary); + + (my $suffix = $fullname) =~ s/^.*\.([^.]*)$/$1/; + + my $mimetype = $MTYPES{$suffix}; + $mimetype ||= $MimeTypes->mimeTypeOf($fullname) if defined($MimeTypes); + + if (!$mimetype && $suffix ne '*' && -f $mime_types && -r _) { + my $fh = do { local (*FH); }; + if (open($fh, $mime_types)) { + my $re = sprintf('^\s*(\S+\/\S+)\s.+\b%s\b', quotemeta($suffix)); + $re = qr/$re/; + while (my $line = <$fh>) { + if ($line =~ $re) { + $mimetype = $1; + $MTYPES{$suffix} = $mimetype; + last; + } + } + close($fh); + } else { + warn("Can't open MIME types file $mime_types for reading: $!"); } - -# okey, didn't find anything useful .. - if (!($mimetype =~ /\S\/\S/)) { - $mimetype = "text/plain"; + } + + $mimetype ||= $MTYPES{'*'}; + $mimetype ||= $binary ? 'application/octet-stream' : 'text/plain'; + return $mimetype; +} + + +############################### +# read first lines like head(1) +############################### +sub head($;$) +{ + my ($fh, $linecount) = @_; + $linecount ||= 10; + + my @buf; + if ($linecount > 0) { + for (my $i = 0; !eof($fh) && $i < $linecount; $i++) { + push @buf, scalar <$fh>; } - return $mimetype; + } else { + @buf = <$fh>; + } + return @buf; } + ############################### +# scan vim and Emacs directives +############################### +sub scan_directives(@) +{ + my $ts = undef; + + for (@_) { + $ts = $1 if /\b(?:ts|tabstop|tab-width)[:=]\s*([1-9]\d*)\b/; + } + + ('tabstop' => $ts); +} + + +sub openOutputFilter() +{ + return unless $output_filter; + + open(STDOUT, "|-") and return; + + # child of child + open(STDERR, '>', devnull()) unless $DEBUG; + exec($output_filter) or exit -1; +} + + +############################### # show Annotation ############################### -sub doAnnotate ($$) { - my ($rev) = @_; - my ($pid); - my ($pathname, $filename); - my $reader = do {local(*FH);}; - my $writer = do {local(*FH);}; +sub doAnnotate($$) +{ + my ($rev, $tag) = @_; + $rev = $tag || 'HEAD' if ($rev eq '.'); + (my $pathname = $where) =~ s|((?<=/)Attic/)?[^/]*$||; + (my $filename = $where) =~ s|^.*/||; - # make sure the revisions a wellformed, for security - # reasons .. - if (!($rev =~ /^[\d\.]+$/)) { - &fatal("404 Not Found", - "Malformed query \"$ENV{QUERY_STRING}\""); + # This annotate version is based on the cvs annotate-demo Perl script by + # Cyclic Software. It was written by Cyclic Software, + # http://www.cyclic.com/, and is in the public domain. + # We could abandon the use of rlog, rcsdiff and co using + # the cvs server in a similiar way one day (..after rewrite). + + local (*CVS_IN, *CVS_OUT); + my $annotate_err; + my ($h, $err) = + startproc([ $CMD{cvs}, @annotate_options, 'server' ], + 'pipe', \*CVS_OUT, + '2>', \$annotate_err); + fatal('500 Internal Error', + 'Annotate failure (exit status %s), output:
%s
', + $? >> 8 || -1, $err) + unless $h; + + # OK, first send the request to the server. A simplified example is: + # Root /home/kingdon/zwork/cvsroot + # Argument foo/xx + # Directory foo + # /home/kingdon/zwork/cvsroot/foo + # Directory . + # /home/kingdon/zwork/cvsroot + # annotate + # although as you can see there are a few more details. + + print CVS_IN "Root $cvsroot\n"; + print CVS_IN + "Valid-responses ok error Valid-requests Checked-in Updated Merged Removed M E\n"; + + # Don't worry about sending valid-requests, the server just needs to + # support "annotate" and if it doesn't, there isn't anything to be done. + print CVS_IN "UseUnchanged\n"; + print CVS_IN "Argument -r\n"; + print CVS_IN "Argument $rev\n"; + print CVS_IN "Argument $where\n"; + + # The protocol requires us to fully fake a working directory (at + # least to the point of including the directories down to the one + # containing the file in question). + # So if $where is "dir/sdir/file", then dirs will be ("dir","sdir","file") + my $path = ''; + foreach my $dir (split('/', $where)) { + + if ($path eq "") { + # In our example, $dir is "dir". + $path = $dir; + } else { + print CVS_IN "Directory $path\n"; + print CVS_IN "$cvsroot/$path\n"; + + # In our example, $_ is "sdir" and $path becomes "dir/sdir" + # And the next time, "file" and "dir/sdir/file" (which then gets + # ignored, because we don't need to send Directory for the file). + $path .= "/$dir"; } + } + undef $path; - ($pathname = $where) =~ s/(Attic\/)?[^\/]*$//; - ($filename = $where) =~ s/^.*\///; + # And the last "Directory" before "annotate" is the top level. + print CVS_IN "Directory .\n"; + print CVS_IN "$cvsroot\n"; - http_header(); + print CVS_IN "annotate\n"; - navigateHeader ($scriptwhere,$pathname,$filename,$rev, "annotate"); - print "

Annotation of $pathname$filename, Revision $rev

\n"; + # OK, we've sent our command to the server. Thing to do is to + # close the writer side and get all the responses. + if (!close(CVS_IN)) { + $h->finish(); + fatal('500 Internal Error', + 'Annotate failure (exit status %s): %s, output: ' . + '
%s
', $? >> 8, $!, $annotate_err); + } - # this seems to be necessary - $| = 1; $| = 0; # Flush + navigateHeader($scriptwhere, $pathname, $filename, $rev, 'annotate'); - # this annotate version is based on the - # cvs annotate-demo Perl script by Cyclic Software - # It was written by Cyclic Software, http://www.cyclic.com/, and is in - # the public domain. - # we could abandon the use of rlog, rcsdiff and co using - # the cvsserver in a similiar way one day (..after rewrite) - $pid = open2($reader, $writer, "cvs server") || fatal ("500 Internal Error", - "Fatal Error - unable to open cvs for annotation"); - - # OK, first send the request to the server. A simplified example is: - # Root /home/kingdon/zwork/cvsroot - # Argument foo/xx - # Directory foo - # /home/kingdon/zwork/cvsroot/foo - # Directory . - # /home/kingdon/zwork/cvsroot - # annotate - # although as you can see there are a few more details. - - print $writer "Root $cvsroot\n"; - print $writer "Valid-responses ok error Valid-requests Checked-in Updated Merged Removed M E\n"; - # Don't worry about sending valid-requests, the server just needs to - # support "annotate" and if it doesn't, there isn't anything to be done. - print $writer "UseUnchanged\n"; - print $writer "Argument -r\n"; - print $writer "Argument $rev\n"; - print $writer "Argument $where\n"; + my $revtype = ($rev =~ /\./) ? 'revision' : 'tag'; # TODO: tag -> branch/tag? + print '

Annotation of ', + htmlquote("$pathname$filename"), ", $revtype $rev

\n"; - # The protocol requires us to fully fake a working directory (at - # least to the point of including the directories down to the one - # containing the file in question). - # So if $where is "dir/sdir/file", then @dirs will be ("dir","sdir","file") - my @dirs = split('/', $where); - my $path = ""; - foreach (@dirs) { - if ($path eq "") { - # In our example, $_ is "dir". - $path = $_; - } - else { - print $writer "Directory $path\n"; - print $writer "$cvsroot/$path\n"; - # In our example, $_ is "sdir" and $path becomes "dir/sdir" - # And the next time, "file" and "dir/sdir/file" (which then gets - # ignored, because we don't need to send Directory for the file). - $path .= "/$_"; - } + # Ready to get the responses from the server. + # For example: + # E Annotations for foo/xx + # E *************** + # M 1.3 (kingdon 06-Sep-97): hello + # ok + my ($lineNr) = 0; + my ($oldLrev, $oldLusr) = ("", ""); + my ($revprint, $usrprint); + + if ($annTable) { + print < +EOF + } else { + print "
";
+  }
+
+  # prefetch several lines
+  my @buf = head(*CVS_OUT);
+
+  my %d = scan_directives(@buf);
+
+  while (@buf || !eof(*CVS_OUT)) {
+
+    $_ = @buf ? shift @buf : ;
+    my @words = split;
+
+    # Adding one is for the (single) space which follows $words[0].
+    my $rest = substr($_, length($words[0]) + 1);
+    if ($words[0] eq "E") {
+      next;
+    } elsif ($words[0] eq "M") {
+      $lineNr++;
+      (my $lrev = substr($_, 2,  13)) =~ y/ //d;
+      (my $lusr = substr($_, 16, 9))  =~ y/ //d;
+      my $line = substr($_, 36);
+      # TODO: this does not work for branch/tag revisions.
+      my $isCurrentRev = ($rev eq $lrev);
+
+      # we should parse the date here ..
+      if ($lrev eq $oldLrev) {
+        $revprint = sprintf('%-8s', '');
+      } else {
+        $revprint = sprintf('%-8s', $lrev);
+        $revprint =~ s|(\S+)|&link($1, uri_escape($filename)."$query#rev$1")|e;
+        $oldLusr = '';
+      }
+
+      $usrprint = ($lusr eq $oldLusr) ? '' : $lusr;
+      $oldLrev = $lrev;
+      $oldLusr = $lusr;
+
+      print $is_textbased ? '' : ''
+        if $isCurrentRev;
+
+      $usrprint = sprintf('%-8s', $usrprint);
+      printf '%s%s %s %4d:', $revprint, $isCurrentRev ? '!' : ' ',
+        htmlquote($usrprint), $lineNr;
+      print spacedHtmlText($line, $d{tabstop});
+
+      print $is_textbased ? '' : '' if $isCurrentRev;
+
+    } elsif ($words[0] eq "ok") {
+      # We could complain about any text received after this, like the
+      # CVS command line client.  But for simplicity, we don't.
+
+    } elsif ($words[0] eq "error") {
+      fatal("500 Internal Error",
+            'Error occured during annotate: %s', $_);
     }
-    # And the last "Directory" before "annotate" is the top level.
-    print $writer "Directory .\n";
-    print $writer "$cvsroot\n";
-    
-    print $writer "annotate\n";
-    # OK, we've sent our command to the server.  Thing to do is to
-    # close the writer side and get all the responses.  If "cvs server"
-    # were nicer about buffering, then we could just leave it open, I think.
-    close ($writer) || die "cannot close: $!";
-    
-    # Ready to get the responses from the server.
-    # For example:
-    #     E Annotations for foo/xx
-    #     E ***************
-    #     M 1.3          (kingdon  06-Sep-97): hello 
-    #     ok
-    my ($lineNr) = 0;
-    my ($oldLrev, $oldLusr) = ("", "");
-    my ($revprint, $usrprint);
-    if ($annTable) {
-	print "\n";
+  }
+  $h->finish();
+
+  if ($annTable) {
+    print "
"; + } else { + print "
"; + } + html_footer(); +} + +############################### +# make Checkout +############################### +sub doCheckout($$$) +{ + my ($fullname, $rev, $tag) = @_; + $rev = $tag || undef if (!$rev || $rev eq '.'); + + # Start resolving whether we will do a markup view or not. + my $do_markup = undef; + my $want_type = $input{'content-type'}; + + # No markup if markup disallowed. + $do_markup = 0 unless $allow_markup; + + # No markup if checkout magic cookie in URL. + $do_markup = 0 if (!defined($do_markup) && $doCheckout); + + # Do markup if explicitly asked using cvsweb-markup content type. If the + # asked content type is anything else, no markup. + if (!defined($do_markup) && $want_type) { + if ($want_type =~ CVSWEBMARKUP) { + $want_type = undef; + $do_markup = 1; + } else { + $do_markup = 0; } - else { - print "
";
+  }
+
+  # Ok, if $do_markup is still undefined, we know that a download has not been
+  # explicitly asked.  For the last check further down below we'll need to
+  # know if the file is binary, and possibly run a log on it.
+  my $needlog = $do_markup || $use_moddate;
+
+  my $moddate = undef;
+  my $revopt;
+  if (defined($rev)) {
+    $revopt = "-r$rev";
+    if ($needlog) {
+      readLog($fullname, $rev);
+      $moddate   = $date{$rev};
+      # TODO: even this does not work for branch tags, but only normal tags :(
+      $moddate ||= $date{$symrev{$rev}} if defined($symrev{$rev});
     }
-    while (<$reader>) {
-	my @words = split;
-	# Adding one is for the (single) space which follows $words[0].
-	my $rest = substr ($_, length ($words[0]) + 1);
-	if ($words[0] eq "E") {
-	    next;
-	}
-	elsif ($words[0] eq "M") {
-	    $lineNr++;
-	    my $lrev = substr ($_, 2, 13);
-	    my $lusr = substr ($_, 16,  9);
-	    my $line = substr ($_, 36);
-	    # we should parse the date here ..
-	    if ($lrev eq $oldLrev) {
-		$revprint = "             ";
-	    }
-	    else {
-		$revprint = $lrev; $oldLusr = "";
-	    }
-	    if ($lusr eq $oldLusr) {
-		$usrprint = "         ";
-	    }
-	    else {
-		$usrprint = $lusr;
-	    }
-	    $oldLrev = $lrev;
-	    $oldLusr = $lusr;
-	    # is there a less timeconsuming way to strip spaces ?
-	    ($lrev = $lrev) =~ s/\s+//g;
-	    my $isCurrentRev = ($rev eq $lrev);
-	    
-	    print "" if ($isCurrentRev);
-	    printf ("%8s%s%8s %4d:", $revprint, ($isCurrentRev ? "|" : " "), $usrprint, $lineNr);
-	    print spacedHtmlText($line);
-	    print "" if ($isCurrentRev);
-	}
-	elsif ($words[0] eq "ok") {
-	    # We could complain about any text received after this, like the
-	    # CVS command line client.  But for simplicity, we don't.
-	}
-	elsif ($words[0] eq "error") {
-	    fatal ("500 Internal Error", "Error occured during annotate: $_");
-	}
+  } else {
+    $revopt = "-rHEAD";
+    if ($needlog) {
+      readLog($fullname);
+      $moddate = $date{$symrev{HEAD}};
     }
-    if ($annTable) {
-	print "";
+  }
+
+  my $cr = abs_path($cvsroot) || $cvsroot;
+  # abs_path() taints when run as a CGI...
+  if ($cr =~ VALID_PATH) {
+    $cr = $1;
+  } else {
+    fatal('500 Internal Error', 'Illegal CVS root: %s', $cr);
+  }
+  # Use abs_path() to work around a bug of cvs -p; expand symlinks if we can.
+  my @cmd = ($CMD{cvs}, @cvs_options, '-d', $cr, 'co', '-p', $revopt, $where);
+
+  local (*CVS_OUT, *CVS_ERR);
+  my ($h, $err) =
+    startproc(\@cmd, \"", '>pipe', \*CVS_OUT, '2>pipe', \*CVS_ERR);
+  fatal('500 Internal Error',
+        'Checkout failure (exit status %s), output: 
%s
', + $? >> 8 || -1, $err) + unless $h; + + if (eof(CVS_ERR)) { + $h->finish(); + fatal("404 Not Found", '%s is not (any longer) pertinent', $where); + } + + #=================================================================== + #Checking out squid/src/ftp.c + #RCS: /usr/src/CVS/squid/src/ftp.c,v + #VERS: 1.1.1.28.6.2 + #*************** + + # Parse CVS header + my ($revision, $filename, $cvsheader); + $filename = ""; + while () { + last if (/^\*\*\*\*/); + $revision = $1 if (/^VERS: (.*)$/); + + if (/^Checking out (.*)$/) { + ($filename = $1) =~ s|^\./+||; } - else { - print "
"; + $cvsheader .= $_; + } + close(CVS_ERR); + + if ($filename ne $where) { + $h->finish(); + fatal("500 Internal Error", + 'Unexpected output from cvs co:
%s
' . + '(expected "%s" but got "%s")', + $cvsheader, $where, $filename); + } + + # Last checks whether we'll do markup or not. + my $isbin = $keywordsubstitution && $keywordsubstitution =~ /b/; + my $mimetype = getMimeType($fullname, $isbin); + + # If we still are not sure whether to do markup or not: + # if the MIME type is "viewable" or this is not a binary file, do. + $do_markup = !$isbin || viewable($mimetype) unless defined($do_markup); + + if ($do_markup) { + + # If this is something we'll be linking to in the markup view, we are + # done with this particular output from "cvs co" and must discard it. + my $linked = $mimetype =~ m{^image/|application/pdf$}i; + if ($linked) { + close(CVS_OUT); + $h->finish(); } - close ($reader) || warn "cannot close: $!"; - wait; + + # Here we know the last modified date, but don't know if tags have been + # added afterwards (those are shown in the markup view): no last-modified. + cvswebMarkup(\*CVS_OUT, $fullname, $revision, $isbin, $mimetype, $needlog); + + $h->finish() unless $linked; + + } else { + http_header($want_type || $mimetype, $moddate); + local $/ = undef; + print ; + $h->finish(); + } } + +sub cvswebMarkup($$$$$$;$) +{ + my ($filehandle, $fullname, $rev, $isbin, $mimetype, $logged, $mod) = @_; + + (my $pathname = $where) =~ s|((?<=/)Attic/)?[^/]*$||; + (my $filename = $where) =~ s|^.*/||; + + navigateHeader($scriptwhere, $pathname, $filename, $rev, 'view', $mod); + + print < +
+File:  +EOF + print &clickablePath($where, 1), "
\n"; + + if ($show_log_in_markup) { + readLog($fullname) unless $logged; #,$rev); + printLog($rev, $mimetype, $isbin); + } else { + print "Revision: $rev
\n"; + print 'Tag: ', htmlquote($input{only_with_tag}), "
\n" + if $input{only_with_tag}; + } + print "
\n
"; + my $url = download_url(uri_escape($filename), $rev, $mimetype); + + if ($mimetype =~ m|^image/|i) { + printf '%s
', + $url . $barequery, htmlquote($filename); + } elsif (lc($mimetype) eq 'application/pdf') { + printf '
', + $url . $barequery; + } else { + print "
\n";
+    my $linenumbers = $input{ln} || 0;
+      my $ln  = 0;
+      my @buf = ();
+      my $ts  = undef;
+
+      if ($preformat_in_markup) {
+        # prefetch several lines
+        @buf = head($filehandle);
+        my %d = scan_directives(@buf);
+        $ts = $d{tabstop};
+      }
+
+      while (@buf || !eof($filehandle)) {
+        $_ = @buf ? shift @buf : <$filehandle>;
+        if ($linenumbers) {
+          $ln++;
+          printf '%5d: ', ($ln) x 2;
+        }
+        print $preformat_in_markup ? spacedHtmlText($_, $ts) : htmlquote($_);
+      }
+    print "
\n"; + } + html_footer(); +} + + +sub viewable($) +{ + return shift =~ m{^((text|image)/|application/pdf)}i; +} + + ############################### -# make Checkout +# Show Colored Diff ############################### -sub doCheckout { - my ($fullname, $rev) = @_; - my ($mimetype,$revopt); - my $fh = do {local(*FH);}; +sub doDiff($$$$$$) +{ + my ($fullname, $r1, $tr1, $r2, $tr2, $f) = @_; - # make sure the revisions a wellformed, for security - # reasons .. - if (defined($rev) && !($rev =~ /^[\d\.]+$/)) { - &fatal("404 Not Found", - "Malformed query \"$ENV{QUERY_STRING}\""); + if (forbidden($fullname)) { + fatal('403 Forbidden', 'Access to %s forbidden.', $where); + } + + my ($rev1, $sym1); + if ($r1 =~ /([^:]+)(:(.+))?/) { + $rev1 = $1; + $sym1 = $3; + } + if ($r1 eq 'text') { + $rev1 = $tr1; + $sym1 = ""; + } + + my ($rev2, $sym2); + if ($r2 =~ /([^:]+)(:(.+))?/) { + $rev2 = $1; + $sym2 = $3; + } + if ($r2 eq 'text') { + $rev2 = $tr2; + $sym2 = ""; + } + + # + # rev1 and rev2 are now both numeric revisions. + # Thus we do a DWIM here and swap them if rev1 is after rev2. + # XXX should we warn about the fact that we do this? + if (&revcmp($rev1, $rev2) > 0) { + my ($tmp1, $tmp2) = ($rev1, $sym1); + ($rev1, $sym1) = ($rev2, $sym2); + ($rev2, $sym2) = ($tmp1, $tmp2); + } + + my $mimetype = getMimeType($fullname); + + # + # Check for per-MIME type diff commands. + # + my $diffcmd = undef; + if (my $diffcmds = $DIFF_COMMANDS{lc($mimetype)}) { + if ($f =~ /^ext(\d*)$/) { + my $n = $1 || 0; + $diffcmd = $diffcmds->[$n]; } + } + if ($diffcmd && $diffcmd->{cmd} && $diffcmd->{name}) { - # get mimetype - if (defined($input{"content-type"}) && ($input{"content-type"} =~ /\S\/\S/)) { - $mimetype = $input{"content-type"} + if ($diffcmd->{args} && ref($diffcmd->{args}) ne 'ARRAY') { + fatal('500 Internal Error', + 'Configuration error: arguments to external diff tools must ' . + 'be given as array refs. See "%s" in ' . + '%%DIFF_COMMANDS.', + $diffcmd->{name}); } - else { - $mimetype = &getMimeTypeFromSuffix($fullname); + + (my $cvsname = $where) =~ s/\.diff$//; + + # Create two temporary files with the two revisions + my $temp_fn1 = checkout_to_temp($cvsroot, $cvsname, $rev1); + my $temp_fn2 = checkout_to_temp($cvsroot, $cvsname, $rev2); + + # Execute chosen diff binary. + local (*DIFF_OUT); + my @cmd = ($diffcmd->{cmd}); + push(@cmd, @{$diffcmd->{args}}) if $diffcmd->{args}; + push(@cmd, $temp_fn1, $temp_fn2); + my ($h, $err) = startproc(\@cmd, \"", '>pipe', \*DIFF_OUT); + if (!$h) { + unlink($temp_fn1); + unlink($temp_fn2); + fatal('500 Internal Error', + 'Diff failure (exit status %s), output:
%s
', + $? >> 8 || -1, $err); } - if (defined($rev)) { - $revopt = "-r$rev"; - if ($use_moddate) { - readLog($fullname,$rev); - $moddate=$date{$rev}; - } + http_header($diffcmd->{type} || 'text/plain'); + local $/ = undef; + print ; + $h->finish(); + unlink($temp_fn1); + unlink($temp_fn2); + + exit; + } + + # + # Normal CVS diff. + # + + $f = $DEFAULTVALUE{f} || 'u' if ($f =~ /^ext\d*$/); + my $difftype = $DIFFTYPES{$f}; + if (!$difftype) { + fatal("400 Bad arguments", 'Diff format %s not understood', $f); + } + + my @difftype = @{$difftype->{opts}}; + my $human_readable = $difftype->{colored}; + + # Apply special diff options. + push @difftype, '-p' if $showfunc; + + if ($human_readable) { + push(@difftype, '-w') if $hr_ignwhite; + push(@difftype, '-kk') if $hr_ignkeysubst; + } + + my $fh = do { local (*FH); }; + if (!open($fh, "-|")) { # child + open(STDERR, ">&STDOUT"); # Redirect stderr to stdout + openOutputFilter(); + exec($CMD{rcsdiff}, @rcsdiff_options, @difftype, "-r$rev1", "-r$rev2", + $fullname) or exit -1; + } + + if ($human_readable) { + # + # Human readable diff. + # + human_readable_diff($fh, $rev2); + html_footer(); + gzipclose(); + exit; + } else { + # + # Plain diff. + # + http_header("text/plain"); + } + + # + #=================================================================== + #RCS file: /home/ncvs/src/sys/netinet/tcp_output.c,v + #retrieving revision 1.16 + #retrieving revision 1.17 + #diff -c -r1.16 -r1.17 + #*** /home/ncvs/src/sys/netinet/tcp_output.c 1995/11/03 22:08:08 1.16 + #--- /home/ncvs/src/sys/netinet/tcp_output.c 1995/12/05 17:46:35 1.17 + # + # Ideas: + # - nuke the stderr output if it's what we expect it to be + # - Add "no differences found" if the diff command supplied no output. + # + #*** src/sys/netinet/tcp_output.c 1995/11/03 22:08:08 1.16 + #--- src/sys/netinet/tcp_output.c 1995/12/05 17:46:35 1.17 RELENG_2_1_0 + # (bogus example, but...) + # + my ($f1, $f2); + if (grep { $_ eq '-u' } @difftype) { + $f1 = '---'; + $f2 = '\+\+\+'; + } else { + $f1 = '\*\*\*'; + $f2 = '---'; + } + + while (<$fh>) { + if (m|^$f1 $cvsroot|o) { + s|$cvsroot/||o; + if ($sym1) { + chop; + $_ .= " $sym1\n"; + } + } elsif (m|^$f2 $cvsroot|o) { + s|$cvsroot/||o; + + if ($sym2) { + chop; + $_ .= " $sym2\n"; + } } - else { - $revopt = "-rHEAD"; - if ($use_moddate) { - readLog($fullname); - $moddate=$date{$symrev{HEAD}}; - } + print $_; + } + close($fh); +} + + +############################### +# Show Logs .. +############################### +sub getDirLogs($$@) +{ + my ($cvsroot, $dirname, @otherFiles) = @_; + my $tag = $input{only_with_tag}; + my $DirName = catdir($cvsroot, $where); + + my @files = &safeglob("$DirName/*,v"); + push (@files, &safeglob("$DirName/Attic/*,v")) unless $input{hideattic}; + foreach my $file (@otherFiles) { + push(@files, catfile($DirName, $file)); + } + + # Weed out unreadable files. + my $i = 0; + my @unreadable = (); + while ($i < scalar(@files)) { + # Note: last modified files from subdirs returned by + # findLastModifiedSubdirs() come without the ,v suffix so they're not + # found here, but have already been checked for readability. *cough* + if (-r $files[$i] || !-e _) { + $i++; + } else { + push(@unreadable, splice(@files, $i, 1)); } - - ### just for the record: - ### 'cvs co' seems to have a bug regarding single checkout of - ### directories/files having spaces in it; - ### this is an issue that should be resolved on cvs's side - # - # Safely for a child process to read from. - if (! open($fh, "-|")) { # child - open(STDERR, ">&STDOUT"); # Redirect stderr to stdout - exec("cvs", "-d", $cvsroot, "co", "-p", $revopt, $where); - } -#=================================================================== -#Checking out squid/src/ftp.c -#RCS: /usr/src/CVS/squid/src/ftp.c,v -#VERS: 1.1.1.28.6.2 -#*************** + } - # Parse CVS header - my ($revision, $filename, $cvsheader); - while(<$fh>) { - last if (/^\*\*\*\*/); - $revision = $1 if (/^VERS: (.*)$/); - if (/^Checking out (.*)$/) { - $filename = $1; - $filename =~ s/^\.\/*//; - } - $cvsheader .= $_; + # If there are no files, we're done. + return @unreadable unless @files; + + my @cmd = ($CMD{rlog}); + # Can't use -r as '-' is allowed in tagnames, + # but misinterpreted by rlog. + push(@cmd, '-r') unless defined($tag); + + my $fh = do { local (*FH); }; + if (!open($fh, '-|')) { # Child + open(STDERR, '>', devnull()) unless $DEBUG; # Ignore rlog's complaints. + openOutputFilter(); + if ($file_list_len && $file_list_len > 1) { + while (scalar(@files) > $file_list_len) { # Process files in chunks. + system(@cmd, splice(@files, 0, $file_list_len)) == 0 or exit -1; + } } - if ($filename ne $where) { - &fatal("500 Internal Error", - "Unexpected output from cvs co: $cvsheader" - . "

Check whether the directory $cvsroot/CVSROOT exists " - . "and the script has write-access to the CVSROOT/history " - . "file if it exists." - . "
The script needs to place lock files in the " - . "directory the file is in as well.
"); + exec(@cmd, @files) or exit -1; + } + undef @cmd; + + my $state = 'start'; + my ($date, $branchpoint, $branch, $log, @filetags); + my ($rev, $revision, $revwanted, $filename, $head, $author, $keywordsubst); + + while (<$fh>) { + if ($state eq "start") { + + #Next file. Initialize file variables + $rev = ''; + $revwanted = ''; + $branch = ''; + $branchpoint = ''; + $filename = ''; + $log = ''; + $revision = ''; + %symrev = (); + @filetags = (); + $keywordsubst= ''; + + #jump to head state + $state = "head"; } - $| = 1; - if ($mimetype eq "text/x-cvsweb-markup") { - &cvswebMarkup($fh,$fullname,$revision); + again: + + if ($state eq "head") { + + #$rcsfile = $1 if (/^RCS file: (.+)$/); #not used (yet) + + if (/^Working file: (.+)$/) { + $filename = $1; + } elsif (/^head: (.+)$/) { + $head = $1; + } elsif (/^branch: (.+)$/) { + $branch = $1; + } elsif (/^keyword substitution: (.+)$/) { + $keywordsubst = $1; + } elsif (/^symbolic names:/) { + $state = "tags"; + ($branch = $head) =~ s/\.\d+$// + if $branch eq ''; + $branch =~ s/(\d+)$/0.$1/; + $symrev{MAIN} = $branch; + $symrev{HEAD} = $branch; + $alltags{MAIN} = 1; + $alltags{HEAD} = 1; + push (@filetags, "MAIN", "HEAD"); + } elsif ($_ =~ LOG_REVSEPR) { + $state = "log"; + $rev = ''; + $date = ''; + $log = ''; + + # Try to reconstruct the relative filename if RCS spits out a full path + $filename =~ s%^\Q$DirName\E/%%; + } + next; } - else { - http_header($mimetype); - print <$fh>; + + if ($state eq "tags") { + if (/^\s+([^:]+):\s+([\d\.]+)\s*$/) { + push (@filetags, $1); + $symrev{$1} = $2; + $alltags{$1} = 1; + next; + } elsif (/^\S/) { + + if (defined($tag)) { + if (defined($symrev{$tag}) || $tag eq "HEAD") { + $revwanted = $symrev{$tag eq "HEAD" ? "MAIN" : $tag}; + ($branch = $revwanted) =~ s/\b0\.//; + ($branchpoint = $branch) =~ s/\.?\d+$//; + $revwanted = '' if ($revwanted ne $branch); + } elsif ($tag ne "HEAD") { + $state = "skip"; + next; + } + } + + foreach my $tagfound (@filetags) { + $tags{$tagfound} = 1; + } + $state = "head"; + goto again; + } } - close($fh); + + if ($state eq "log") { + if ($_ =~ LOG_REVSEPR || $_ =~ LOG_FILESEPR) { + + # End of a log entry. + my $revbranch = $rev; + $revbranch =~ s/\.\d+$//; + + if ($revwanted eq '' && $branch ne '' && $branch eq $revbranch + || !defined($tag)) + { + $revwanted = $rev; + } + + if ($revwanted ne '' + ? $rev eq $revwanted + : $branchpoint ne '' + ? $rev eq $branchpoint + : 0 + && ($rev eq $head)) + { # Don't think head is needed here.. + my @finfo = ($rev, $date, $log, $author, $filename, $keywordsubst); + (my $name = $filename) =~ s%/.*%%; + $fileinfo{$name} = [@finfo]; + $state = "done" if ($rev eq $revwanted); + } + $rev = ''; + $date = ''; + $log = ''; + } elsif ($date eq '' + && m|^date:\s+(\d+)/(\d+)/(\d+)\s+(\d+):(\d+):(\d+);|) + { + my $yr = $1; + $yr -= 1900 if ($yr > 100); # Damn 2-digit year routines :-) + $date = timegm($6, $5, $4, $3, $2 - 1, $yr); + ($author) = /author: ([^;]+)/; + $state = 'log'; + $log = ''; + next; + } elsif ($rev eq '' && /^revision (\d+(?:\.\d+)+).*$/) { + $rev = $1; # .*$ eats up the locker(lockers?) info, if any + next; + } else { + $log .= $_; + } + } + + if ($_ =~ LOG_FILESEPR) { + $state = "start"; + next; + } + } + + my $linesread = $. || 0; + close($fh); + + if ($linesread == 0) { + fatal('500 Internal Error', + 'Failed to spawn GNU rlog on "%s".

Did you set the @command_path in your configuration file correctly? (Currently: "%s")', + htmlquote(join(', ', @files)), join(':', @command_path)); + } + + return @unreadable; } -sub cvswebMarkup { - my ($filehandle,$fullname,$revision) = @_; - my ($pathname, $filename); - ($pathname = $where) =~ s/(Attic\/)?[^\/]*$//; - ($filename = $where) =~ s/^.*\///; - my ($fileurl) = urlencode($filename); +sub readLog($;$) +{ + my ($fullname, $revision) = @_; + my ($symnames, $head, $rev, $br, $brp, $branch, $branchrev); - http_header(); + undef %symrev; + undef %revsym; + undef @allrevisions; + undef %date; + undef %author; + undef %state; + undef %difflines; + undef %log; + $keywordsubstitution = ''; - navigateHeader ($scriptwhere, $pathname, $filename, $revision, "view"); - print "


"; - print "
"; - print "File: ", &clickablePath($where, 1); - print " "; - &download_link(urlencode($fileurl), $revision, "(download)"); - if (!$defaultTextPlain) { - print " "; - &download_link(urlencode($fileurl), $revision, "(as text)", - "text/plain"); + my $fh = do { local (*FH); }; + if (!open($fh, "-|")) { # child + openOutputFilter(); + $revision = defined($revision) ? "-r$revision" : ''; + if ($revision =~ /\./) { + # Normal revision, not a branch/tag name. + exec($CMD{rlog}, $revision, $fullname) or exit -1; + } else { + exec($CMD{rlog}, $fullname) or exit -1; } - print "
\n"; - if ($show_log_in_markup) { - readLog($fullname); #,$revision); - printLog($revision,0); + } + + my $curbranch = undef; + while (<$fh>) { + if ($symnames) { + if (/^\s+([^:]+):\s+([\d\.]+)/) { + $symrev{$1} = $2; + next; + } else { + $symnames = 0; + } } - else { - print "Version: $revision
\n"; - print "Tag: ", $input{only_with_tag}, "
\n" if - $input{only_with_tag}; + if (/^head:\s+([\d\.]+)/) { + $head = $1; + } elsif (/^branch:\s+([\d\.]+)/) { + $curbranch = $1; + } elsif (/^symbolic names/) { + $symnames = 1; + } elsif (/^keyword substitution: (.+)$/) { + $keywordsubstitution = $1; + } elsif (/^-----/) { + last; } - print "
"; - my @content = <$filehandle>; - my $url = download_url($fileurl, $revision, $mimetype); - print "
"; - if ($mimetype =~ /^image/) { - print "
"; + } + ($curbranch = $head) =~ s/\.\d+$// if (!defined($curbranch)); + + # each log entry is of the form: + # ---------------------------- + # revision 3.7.1.1 + # date: 1995/11/29 22:15:52; author: fenner; state: Exp; lines: +5 -3 + # log info + # ---------------------------- + + # For a locked revision, the first line after the separator + # becomes smth like + # revision 9.19 locked by: vassilii; + + logentry: + + while ($_ !~ LOG_FILESEPR) { + $_ = <$fh>; + last logentry if (!defined($_)); # EOF + if (/^revision (\d+(?:\.\d+)+)/) { + $rev = $1; + unshift(@allrevisions, $rev); + } elsif ($_ =~ LOG_FILESEPR || $_ =~ LOG_REVSEPR) { + next logentry; + } else { + + # The rlog output is syntactically ambiguous. We must + # have guessed wrong about where the end of the last log + # message was. + # Since this is likely to happen when people put rlog output + # in their commit messages, don't even bother keeping + # these lines since we don't know what revision they go with + # any more. + next logentry; } - else { - print "
";
-	foreach (@content) {
-	    print spacedHtmlText($_);
-	}
-	print "
"; + $_ = <$fh>; + if ( + m|^date:\s+(\d+)/(\d+)/(\d+)\s+(\d+):(\d+):(\d+);\s+author:\s+(\S+);\s+state:\s+(\S+);\s+(lines:\s+([0-9\s+-]+))?| + ) + { + my $yr = $1; + $yr -= 1900 if ($yr > 100); # Damn 2-digit year routines :-) + $date{$rev} = timegm($6, $5, $4, $3, $2 - 1, $yr); + $author{$rev} = $7; + $state{$rev} = $8; + $difflines{$rev} = $10; + } else { + fatal("500 Internal Error", 'Error parsing RCS output: %s', $_); } + + line: + while (<$fh>) { + next line if (/^branches:\s/); + last line if ($_ =~ LOG_FILESEPR || $_ =~ LOG_REVSEPR); + $log{$rev} .= $_; + } + } + close($fh); + + @revorder = reverse sort { revcmp($a, $b) } @allrevisions; + + # + # HEAD is an artificial tag which is simply the highest tag number on the main + # branch, unless there is a branch tag in the RCS file in which case it's the + # highest revision on that branch. Find it by looking through @revorder; it + # is the first commit listed on the appropriate branch. + # This is not neccesary the same revision as marked as head in the RCS file. + my $headrev = $curbranch || "1"; + ($symrev{MAIN} = $headrev) =~ s/(\d+)$/0.$1/; + + foreach $rev (@revorder) { + if ($rev =~ /^(\S*)\.\d+$/ && $headrev eq $1) { + $symrev{HEAD} = $rev; + last; + } + } + ($symrev{HEAD} = $headrev) =~ s/\.\d+$// unless defined($symrev{HEAD}); + + # + # Now that we know all of the revision numbers, we can associate + # absolute revision numbers with all of the symbolic names, and + # pass them to the form so that the same association doesn't have + # to be built then. + # + undef @branchnames; + undef %branchpoint; + undef $sel; + + foreach (reverse sort keys %symrev) { + $rev = $symrev{$_}; + if ($rev =~ /^((.*)\.)?\b0\.(\d+)$/) { + push (@branchnames, $_); + + # + # A revision number of A.B.0.D really translates into + # "the highest current revision on branch A.B.D". + # + # If there is no branch A.B.D, then it translates into + # the head A.B . + # + # This reasoning also applies to the main branch A.B, + # with the branch number 0.A, with the exception that + # it has no head to translate to if there is nothing on + # the branch, but I guess this can never happen? + # + # (the code below gracefully forgets about the branch + # if it should happen) + # + $head = defined($2) ? $2 : ""; + $branch = $3; + $branchrev = $head . ($head ne "" ? "." : "") . $branch; + $rev = $head; + + my $regex = '^' . quotemeta($branchrev) . '\b'; + $regex = qr/$regex/; + + foreach my $r (@revorder) { + if ($r =~ $regex) { + $rev = $branchrev; + last; + } + } + next if ($rev eq ""); + + if ($rev ne $head && $head ne "") { + $branchpoint{$head} .= ', ' if ($branchpoint{$head}); + $branchpoint{$head} .= $_; + } + } + $revsym{$rev} .= ", " if ($revsym{$rev}); + $revsym{$rev} .= $_; + $sel .= sprintf("\n", + htmlquote($rev), (htmlquote($_)) x 2); + } + + my ($onlyonbranch, $onlybranchpoint); + if ($onlyonbranch = $input{only_with_tag}) { + $onlyonbranch = $symrev{$onlyonbranch}; + if ($onlyonbranch && $onlyonbranch =~ s/\b0\.//) { + ($onlybranchpoint = $onlyonbranch) =~ s/\.\d+$//; + } else { + $onlybranchpoint = $onlyonbranch; + } + + if (!defined($onlyonbranch) || $onlybranchpoint eq "") { + fatal("404 Tag not found", 'Tag "%s" is not defined.', + $input{only_with_tag}); + } + } + + undef @revisions; + + foreach (@allrevisions) { + ($br = $_) =~ s/\.\d+$//; + ($brp = $br) =~ s/\.\d+$//; + next if ($onlyonbranch + && $br ne $onlyonbranch + && $_ ne $onlybranchpoint); + unshift(@revisions, $_); + } + + if ($logsort eq "date") { + + # Sort the revisions in commit order an secondary sort on revision + # (secondary sort needed for imported sources, or the first main + # revision gets before the same revision on the 1.1.1 branch) + @revdisplayorder = + sort { $date{$b} <=> $date{$a} || -revcmp($a, $b) } @revisions; + } elsif ($logsort eq "rev") { + + # Sort the revisions in revision order, highest first + @revdisplayorder = reverse sort { revcmp($a, $b) } @revisions; + } else { + + # No sorting. Present in the same order as rlog / cvs log + @revdisplayorder = @revisions; + } + + return $curbranch; } -sub viewable($) { - my ($mimetype) = @_; - $mimetype =~ m%^text/% || - $mimetype =~ m%^image/% || - 0; +sub getDiffLinks($$$) +{ + my ($url, $mimetype, $isbin) = @_; + + my @links = (); + if (!$isbin) { # Offer ordinary diff only for non-binary files. + push(@links, &link('preferred', $url)); + for my $difftype ($DIFFTYPES{$defaultDiffType}{colored} ? qw(u) : qw(h)) { + my $f = $difftype eq $defaultDiffType ? '' : $difftype; + push(@links, + &link(htmlquote(lc($DIFFTYPES{$difftype}{descr})), "$url;f=$f")); + } + } + if (my $extdiffs = $DIFF_COMMANDS{lc($mimetype)}) { + for my $i (0 .. scalar(@$extdiffs)-1) { + my $extdiff = $extdiffs->[$i]; + push(@links, &link(htmlquote($extdiff->{name}), "$url;f=ext$i")) + if ($extdiff->{cmd} && $extdiff->{name}); + } + } + return @links; } -############################### -# Show Colored Diff -############################### -sub doDiff { - my($fullname, $r1, $tr1, $r2, $tr2, $f) = @_; - my $fh = do {local(*FH);}; - my ($rev1, $rev2, $sym1, $sym2, @difftype, $diffname, $f1, $f2); - if ($r1 =~ /([^:]+)(:(.+))?/) { - $rev1 = $1; - $sym1 = $3; - } - if ($r1 eq 'text') { - $rev1 = $tr1; - $sym1 = ""; - } - if ($r2 =~ /([^:]+)(:(.+))?/) { - $rev2 = $1; - $sym2 = $3; - } - if ($r2 eq 'text') { - $rev2 = $tr2; - $sym2 = ""; - } - # make sure the revisions a wellformed, for security - # reasons .. - if (!($rev1 =~ /^[\d\.]+$/) || !($rev2 =~ /^[\d\.]+$/)) { - &fatal("404 Not Found", - "Malformed query \"$ENV{QUERY_STRING}\""); - } -# -# rev1 and rev2 are now both numeric revisions. -# Thus we do a DWIM here and swap them if rev1 is after rev2. -# XXX should we warn about the fact that we do this? - if (&revcmp($rev1,$rev2) > 0) { - my ($tmp1, $tmp2) = ($rev1, $sym1); - ($rev1, $sym1) = ($rev2, $sym2); - ($rev2, $sym2) = ($tmp1, $tmp2); - } - my $human_readable = 0; - if ($f eq 'c') { - @difftype = qw{-c}; - $diffname = "Context diff"; - } - elsif ($f eq 's') { - @difftype = qw{--side-by-side --width=164}; - $diffname = "Side by Side"; - } - elsif ($f eq 'H') { - $human_readable = 1; - @difftype = qw{--unified=15}; - $diffname = "Long Human readable"; - } - elsif ($f eq 'h') { - @difftype =qw{-u}; - $human_readable = 1; - $diffname = "Human readable"; - } - elsif ($f eq 'u') { - @difftype = qw{-u}; - $diffname = "Unidiff"; - } - else { - fatal ("400 Bad arguments", "Diff format $f not understood"); - } +sub printLog($$$;$$) +{ + # inlogview: 1 if in log view, otherwise in markup view. + ($_, my $mimetype, my $isbin, my $inlogview, my $isSelected) = @_; + (my $br = $_) =~ s/\.\d+$//; + (my $brp = $br) =~ s/\.?\d+$//; - # apply special options - if ($showfunc) { - push @difftype, '-p'; + print ""; + if (defined($revsym{$_})) { + foreach my $sym (split(", ", $revsym{$_})) { + print ''; + } + } + if ($revsym{$br} && !defined($nameprinted{$br})) { + foreach my $sym (split(", ", $revsym{$br})) { + print ''; + } + $nameprinted{$br} = 1; + } - my($re1, $re2); + print "\n Revision $_"; + if (/^1\.1\.1\.\d+$/) { + print " (vendor branch)"; + } - while (($re1, $re2) = each %funcline_regexp) { - if ($fullname =~ /$re1/) { - push @difftype, '-F', '$re2'; - last; - } - } - } - if ($human_readable) { - if ($hr_ignwhite) { - push @difftype, '-w'; - } - if ($hr_ignkeysubst) { - push @difftype, '-kk'; - } - } - if (! open($fh, "-|")) { # child - open(STDERR, ">&STDOUT"); # Redirect stderr to stdout - exec("rcsdiff",@difftype,"-r$rev1","-r$rev2",$fullname); - } - if ($human_readable) { - http_header(); - &human_readable_diff($fh, $rev2); - exit; - } - else { - http_header("text/plain"); - } -# -#=================================================================== -#RCS file: /home/ncvs/src/sys/netinet/tcp_output.c,v -#retrieving revision 1.16 -#retrieving revision 1.17 -#diff -c -r1.16 -r1.17 -#*** /home/ncvs/src/sys/netinet/tcp_output.c 1995/11/03 22:08:08 1.16 -#--- /home/ncvs/src/sys/netinet/tcp_output.c 1995/12/05 17:46:35 1.17 -# -# Ideas: -# - nuke the stderr output if it's what we expect it to be -# - Add "no differences found" if the diff command supplied no output. -# -#*** src/sys/netinet/tcp_output.c 1995/11/03 22:08:08 1.16 -#--- src/sys/netinet/tcp_output.c 1995/12/05 17:46:35 1.17 RELENG_2_1_0 -# (bogus example, but...) -# - if (grep { $_ eq '-u'} @difftype) { - $f1 = '---'; - $f2 = '\+\+\+'; - } - else { - $f1 = '\*\*\*'; - $f2 = '---'; - } - while (<$fh>) { - if (m|^$f1 $cvsroot|o) { - s|$cvsroot/||o; - if ($sym1) { - chop; - $_ .= " " . $sym1 . "\n"; - } - } - elsif (m|^$f2 $cvsroot|o) { - s|$cvsroot/||o; - if ($sym2) { - chop; - $_ .= " " . $sym2 . "\n"; - } - } - print $_; - } - close($fh); -} + (my $filename = $where) =~ s|^.*/||; + my $fileurl = uri_escape($filename); + undef $filename; -############################### -# Show Logs .. -############################### -sub getDirLogs { - my ($cvsroot,$dirname,@otherFiles) = @_; - my ($state,$otherFiles,$tag, $file, $date, $branchpoint, $branch, $log); - my ($rev, $revision, $revwanted, $filename, $head, $author); + my $isDead = ($state{$_} eq 'dead'); + if (!$isDead) { - $tag = $input{only_with_tag}; + print ': ', download_link($fileurl, $_, 'download', $mimetype); - my ($DirName) = "$cvsroot/$where"; - my (@files, @filetags); - my $fh = do {local(*FH);}; + my @vlinks = (); + push(@vlinks, display_link($fileurl, $_, 'text', 'text/plain')) + unless $isbin; + push(@vlinks, display_link($fileurl, $_, 'markup', 'text/x-cvsweb-markup')) + if ($allow_markup && $inlogview && (!$isbin || viewable($mimetype))); + if (!$isbin && $allow_annotate) { + push(@vlinks, + &link('annotated', + sprintf('%s?annotate=%s%s', $fileurl, $_, $barequery))); + } + print ' - view: ', join(', ', @vlinks) if @vlinks; + undef @vlinks; - push(@files, &safeglob("$DirName/*,v")); - push(@files, &safeglob("$DirName/Attic/*,v")) if (!$input{'hideattic'}); - foreach $file (@otherFiles) { - push(@files, "$DirName/$file"); + if (!$isbin && $allow_version_select) { + print ' - '; + if ($isSelected) { + print '[selected for diffs]'; + } else { + print &link('select for diffs', + sprintf('%s?r1=%s%s#rev%s', + $fileurl, $_, $barequery, $_)); + } } + } + print "
\n"; - # just execute rlog if there are any files - if ($#files < 0) { - return; + print ''; + print scalar gmtime($date{$_}), ' UTC ('; + print readableTime(time() - $date{$_}, 1), ' ago)'; + print ' by ', htmlquote($author{$_}), "
\n"; + + printf("Branches: %s
\n", link_tags($revsym{$br})) if $revsym{$br}; + printf("CVS tags: %s
\n", link_tags($revsym{$_})) if $revsym{$_}; + printf("Branch point for: %s
\n", link_tags($branchpoint{$_})) + if $branchpoint{$_}; + + # Find the previous revision + my $prev; + my @prevrev = split(/\./, $_); + do { + if (--$prevrev[$#prevrev] <= 0) { + + # If it was X.Y.Z.1, just make it X.Y + pop (@prevrev); + pop (@prevrev); } + $prev = join (".", @prevrev); + } until (defined($date{$prev}) || $prev eq ""); - if ($tag) { - #can't use -r as - is allowed in tagnames, but misinterpreated by rlog.. - if (! open($fh, "-|")) { - open(STDERR, '>/dev/null'); # rlog may complain; ignore. - exec('rlog', @files); - } + if ($isDead) { + print "FILE REMOVED
\n"; + } else { + my %diffrev = (); + $diffrev{$_} = 1; + $diffrev{""} = 1; + my $diff = 'Diff to:'; + my $printed = 0; + + # + # Offer diff to previous revision + if ($prev) { + $diffrev{$prev} = 1; + my $url = + sprintf('%s.diff?r1=%s;r2=%s%s', $fileurl, $prev, $_, $barequery); + if (my @dlinks = getDiffLinks($url, $mimetype, $isbin)) { + print $diff, ' previous ', $prev, ': ', join(', ', @dlinks); + $diff = ';'; $printed = 1; + } } - else { - my $kidpid = open($fh, "-|"); - if (! $kidpid) { - open(STDERR, '>/dev/null'); # rlog may complain; ignore. - exec('rlog', '-r', @files); - } + + # + # Plus, if it's on a branch, and it's not a vendor branch, + # offer a diff with the branch point. + if ($revsym{$brp} + && !/^1\.1\.1\.\d+$/ + && !defined($diffrev{$brp})) + { + my $url = + sprintf('%s.diff?r1=%s;r2=%s%s', $fileurl, $brp, $_, $barequery); + if (my @dlinks = getDiffLinks($url, $mimetype, $isbin)) { + print $diff, ' branchpoint ', $brp, ': ', join(', ', @dlinks); + $diff = ';'; $printed = 1; + } } - $state = "start"; - while (<$fh>) { - if ($state eq "start") { - #Next file. Initialize file variables - $rev = undef; - $revwanted = undef; - $branch = undef; - $branchpoint = undef; - $filename = undef; - $log = undef; - $revision = undef; - $branch = undef; - %symrev = (); - @filetags = (); - #jump to head state - $state = "head"; - } - print "$state:$_" if ($verbose); -again: - if ($state eq "head") { - #$rcsfile = $1 if (/^RCS file: (.+)$/); #not used (yet) - $filename = $1 if (/^Working file: (.+)$/); - $head = $1 if (/^head: (.+)$/); - $branch = $1 if (/^branch: (.+)$/); - } - if ($state eq "head" && /^symbolic names/) { - $state = "tags"; - ($branch = $head) =~ s/\.\d+$// if (!defined($branch)); - $branch =~ s/(\.?)(\d+)$/${1}0.$2/; - $symrev{MAIN} = $branch; - $symrev{HEAD} = $branch; - $alltags{MAIN} = 1; - $alltags{HEAD} = 1; - push (@filetags, "MAIN", "HEAD"); - next; - } - if ($state eq "tags" && - /^\s+(.+):\s+([\d\.]+)\s+$/) { - push (@filetags, $1); - $symrev{$1} = $2; - $alltags{$1} = 1; - next; - } - if ($state eq "tags" && /^\S/) { - if (defined($tag) && (defined($symrev{$tag}) || $tag eq "HEAD")) { - $revwanted = $tag eq "HEAD" ? $symrev{"MAIN"} : $symrev{$tag}; - ($branch = $revwanted) =~ s/\b0\.//; - ($branchpoint = $branch) =~ s/\.?\d+$//; - $revwanted = undef if ($revwanted ne $branch); - } - elsif (defined($tag) && $tag ne "HEAD") { - print "Tag not found, skip this file" if ($verbose); - $state = "skip"; - next; - } - foreach my $tagfound (@filetags) { - $tags{$tagfound} = 1; - } - $state = "head"; - goto again; - } - if ($state eq "head" && /^----------------------------$/) { - $state = "log"; - $rev = undef; - $date = undef; - $log = ""; - # Try to reconstruct the relative filename if RCS spits out a full path - $filename =~ s%^\Q$DirName\E/%%; - next; - } - if ($state eq "log") { - if (/^----------------------------$/ - || /^=============================/) { - # End of a log entry. - my $revbranch; - ($revbranch = $rev) =~ s/\.\d+$//; - print "$filename $rev Wanted: $revwanted " - . "Revbranch: $revbranch Branch: $branch " - . "Branchpoint: $branchpoint\n" if ($verbose); - if (!defined($revwanted) && defined($branch) - && $branch eq $revbranch || !defined($tag)) { - print "File revision $rev found for branch $branch\n" - if ($verbose); - $revwanted = $rev; - } - if (defined($revwanted) ? $rev eq $revwanted : - defined($branchpoint) ? $rev eq $branchpoint : - 0 && ($rev eq $head)) { # Don't think head is needed here.. - print "File info $rev found for $filename\n" if ($verbose); - my @finfo = ($rev,$date,$log,$author,$filename); - my ($name); - ($name = $filename) =~ s%/.*%%; - $fileinfo{$name} = [ @finfo ]; - $state = "done" if ($rev eq $revwanted); - } - $rev = undef; - $date = undef; - $log = ""; - } - elsif (!defined($date) && m|^date:\s+(\d+)/(\d+)/(\d+)\s+(\d+):(\d+):(\d+);|) { - my $yr = $1; - # damn 2-digit year routines :-) - if ($yr > 100) { - $yr -= 1900; - } - $date = &Time::Local::timegm($6,$5,$4,$3,$2 - 1,$yr); - ($author) = /author: ([^;]+)/; - $state = "log"; - $log = ''; - next; - } - elsif (!defined($rev) && m/^revision (.*)$/) { - $rev = $1; - next; - } - else { - $log = $log . $_; - } - } - if (/^===============/) { - $state = "start"; - next; - } + + # + # Plus, if it's on a branch, and it's not a vendor branch, + # offer to diff with the next revision of the higher branch. + # (e.g. change gets committed and then brought + # over to -stable) + if (/^\d+\.\d+\.\d+/ && !/^1\.1\.1\.\d+$/) { + my ($i, $nextmain); + + for ($i = 0; $i < $#revorder && $revorder[$i] ne $_; $i++) { + } + my @tmp2 = split(/\./, $_); + for ($nextmain = ""; $i > 0; $i--) { + my $next = $revorder[$i - 1]; + my @tmp1 = split(/\./, $next); + + if (@tmp1 < @tmp2) { + $nextmain = $next; + last; + } + + # Only the highest version on a branch should have + # a diff for the "next MAIN". + last + if (@tmp1 - 1 <= @tmp2 + && join (".", @tmp1[0 .. $#tmp1 - 1]) eq + join (".", @tmp2[0 .. $#tmp1 - 1])); + } + + if (!defined($diffrev{$nextmain})) { + $diffrev{$nextmain} = 1; + my $url = sprintf('%s.diff?r1=%s;r2=%s%s', + $fileurl, $nextmain, $_, $barequery); + if (my @dlinks = getDiffLinks($url, $mimetype, $isbin)) { + print $diff, ' next MAIN ', $nextmain, ': ', join(', ', @dlinks); + $diff = ';'; $printed = 1; + } + } } - if ($. == 0) { - fatal("500 Internal Error", - "Failed to spawn GNU rlog on '".join(", ", @files)."'

did you set the \$ENV{PATH} in your configuration file correctly ?"); + + # Plus if user has selected only r1, then present a link + # to make a diff to that revision + if (defined($input{r1}) && !defined($diffrev{$input{r1}})) { + $diffrev{$input{r1}} = 1; + my $url = sprintf('%s.diff?r1=%s;r2=%s%s', + $fileurl, $input{r1}, $_, $barequery); + if (my @dlinks = getDiffLinks($url, $mimetype, $isbin)) { + print $diff, ' selected ', $input{r1}, ': ', join(', ', @dlinks); + $diff = ';'; $printed = 1; + } } - close($fh); + + print "
\n" if $printed; + } + + if ($prev ne "" && $difflines{$_}) { + printf "Changes since revision %s: %s lines
\n", + htmlquote($prev), htmlquote($difflines{$_}); + } + + print "

\n";
+  print &htmlify($log{$_}, $allow_log_extra);
+  print "
\n"; } -sub readLog { - my($fullname,$revision) = @_; - my ($symnames, $head, $rev, $br, $brp, $branch, $branchrev); - my $fh = do {local(*FH);}; - if (defined($revision)) { - $revision = "-r$revision"; - } - else { - $revision = ""; - } +sub doLog($) +{ + my ($fullname) = @_; - undef %symrev; - undef %revsym; - undef @allrevisions; - undef %date; - undef %author; - undef %state; - undef %difflines; - undef %log; + my $curbranch = readLog($fullname); - print("Going to rlog '$fullname'\n") if ($verbose); - if (! open($fh, "-|")) { # child - if ($revision ne '') { - exec("rlog",$revision,$fullname); - } - else { - exec("rlog",$fullname); - } - } - while (<$fh>) { - print if ($verbose); - if ($symnames) { - if (/^\s+([^:]+):\s+([\d\.]+)/) { - $symrev{$1} = $2; - } - else { - $symnames = 0; - } - } - elsif (/^head:\s+([\d\.]+)/) { - $head = $1; - } - elsif (/^branch:\s+([\d\.]+)/) { - $curbranch = $1; - } - elsif (/^symbolic names/) { - $symnames = 1; - } - elsif (/^-----/) { - last; - } - } - ($curbranch = $head) =~ s/\.\d+$// if (!defined($curbranch)); + html_header("CVS log for $where"); -# each log entry is of the form: -# ---------------------------- -# revision 3.7.1.1 -# date: 1995/11/29 22:15:52; author: fenner; state: Exp; lines: +5 -3 -# log info -# ---------------------------- - logentry: - while (!/^=========/) { - $_ = <$fh>; - last logentry if (!defined($_)); # EOF - print "R:", $_ if ($verbose); - if (/^revision ([\d\.]+)/) { - $rev = $1; - unshift(@allrevisions,$rev); - } - elsif (/^========/ || /^----------------------------$/) { - next logentry; - } - else { - # The rlog output is syntactically ambiguous. We must - # have guessed wrong about where the end of the last log - # message was. - # Since this is likely to happen when people put rlog output - # in their commit messages, don't even bother keeping - # these lines since we don't know what revision they go with - # any more. - next logentry; -# &fatal("500 Internal Error","Error parsing RCS output: $_"); - } - $_ = <$fh>; - print "D:", $_ if ($verbose); - if (m|^date:\s+(\d+)/(\d+)/(\d+)\s+(\d+):(\d+):(\d+);\s+author:\s+(\S+);\s+state:\s+(\S+);\s+(lines:\s+([0-9\s+-]+))?|) { - my $yr = $1; - # damn 2-digit year routines :-) - if ($yr > 100) { - $yr -= 1900; - } - $date{$rev} = &Time::Local::timegm($6,$5,$4,$3,$2 - 1,$yr); - $author{$rev} = $7; - $state{$rev} = $8; - $difflines{$rev} = $10; - } - else { - &fatal("500 Internal Error", "Error parsing RCS output: $_"); - } - line: - while (<$fh>) { - print "L:", $_ if ($verbose); - next line if (/^branches:\s/); - last line if (/^----------------------------$/ || /^=========/); - $log{$rev} .= $_; - } - print "E:", $_ if ($verbose); - } - close($fh); - print "Done reading RCS file\n" if ($verbose); + my $upwhere = $where; + (my $filename = $where) =~ s|^.*/||; + my $backurl = "./$query#" . uri_escape($filename); + if ($where =~ m|^(.*?)((?<=/)Attic/)?[^/]+$|) { + $upwhere = $1; + $backurl = ".$backurl" if $2; # skip over Attic + } - @revorder = reverse sort {revcmp($a,$b)} @allrevisions; - print "Done sorting revisions",join(" ",@revorder),"\n" if ($verbose); + my $isbin = $keywordsubstitution =~ /b/; + my $mimetype = getMimeType($filename, $isbin); -# -# HEAD is an artificial tag which is simply the highest tag number on the main -# branch, unless there is a branch tag in the RCS file in which case it's the -# highest revision on that branch. Find it by looking through @revorder; it -# is the first commit listed on the appropriate branch. -# This is not neccesary the same revision as marked as head in the RCS file. - my $headrev = $curbranch || "1"; - ($symrev{"MAIN"} = $headrev) =~ s/(\.?)(\d+)$/${1}0.$2/; - revision: - foreach $rev (@revorder) { - if ($rev =~ /^(\S*)\.\d+$/ && $headrev eq $1) { - $symrev{"HEAD"} = $rev; - last revision; - } - } - ($symrev{"HEAD"} = $headrev) =~ s/\.\d+$// - if (!defined($symrev{"HEAD"})); - print "Done finding HEAD\n" if ($verbose); -# -# Now that we know all of the revision numbers, we can associate -# absolute revision numbers with all of the symbolic names, and -# pass them to the form so that the same association doesn't have -# to be built then. -# - undef @branchnames; - undef %branchpoint; - undef $sel; + print "

\n "; + print &link($backicon, $backurl), " Up to ", + &clickablePath($upwhere, 1), "\n

\n"; + print "

\n "; + print &link('Request diff between arbitrary revisions', '#diff'); + print "\n

\n
\n"; - foreach (reverse sort keys %symrev) { - $rev = $symrev{$_}; - if ($rev =~ /^((.*)\.)?\b0\.(\d+)$/) { - push(@branchnames, $_); - # - # A revision number of A.B.0.D really translates into - # "the highest current revision on branch A.B.D". - # - # If there is no branch A.B.D, then it translates into - # the head A.B . - # - # This reasoning also applies to the main branch A.B, - # with the branch number 0.A, with the exception that - # it has no head to translate to if there is nothing on - # the branch, but I guess this can never happen? - # (the code below gracefully forgets about the branch - # if it should happen) - # - $head = defined($2) ? $2 : ""; - $branch = $3; - $branchrev = $head . ($head ne "" ? "." : "") . $branch; - my $regex; - ($regex = $branchrev) =~ s/\./\\./g; - $rev = $head; + print "

\n"; - revision: - foreach my $r (@revorder) { - if ($r =~ /^${regex}\b/) { - $rev = $branchrev; - last revision; - } - } - next if ($rev eq ""); - if ($rev ne $head && $head ne "") { - $branchpoint{$head} .= ", " if ($branchpoint{$head}); - $branchpoint{$head} .= $_; - } - } - $revsym{$rev} .= ", " if ($revsym{$rev}); - $revsym{$rev} .= $_; - $sel .= "

\n"; - undef @revisions; + undef %nameprinted; - foreach (@allrevisions) { - ($br = $_) =~ s/\.\d+$//; - ($brp = $br) =~ s/\.\d+$//; - next if ($onlyonbranch && $br ne $onlyonbranch && - $_ ne $onlybranchpoint); - unshift(@revisions,$_); - } + for my $r (@revdisplayorder) { + print "
\n"; + my $sel = (defined($input{r1}) && $input{r1} eq $r); + print "
\n" if $sel; + printLog($r, $mimetype, $isbin, 1, $sel); + print "
\n" if $sel; + } - if ($logsort eq "date") { - # Sort the revisions in commit order an secondary sort on revision - # (secondary sort needed for imported sources, or the first main - # revision gets before the same revision on the 1.1.1 branch) - @revdisplayorder = sort {$date{$b} <=> $date{$a} || -revcmp($a, $b)} @revisions; - } - elsif ($logsort eq "rev") { - # Sort the revisions in revision order, highest first - @revdisplayorder = reverse sort {revcmp($a,$b)} @revisions; - } - else { - # No sorting. Present in the same order as rlog / cvs log - @revdisplayorder = @revisions; - } + printf(< +
+
+Diff request +

+ + This form allows you to request diffs between any two revisions of a file. + You may select a symbolic revision name using the selection box or you may + type in a numeric name using the type-in text box. + +

+EOF -} + foreach (@stickyvars) { + printf("\n", + $_, htmlquote($input{$_})) + if (defined($input{$_}) && + (!defined($DEFAULTVALUE{$_}) || $input{$_} ne $DEFAULTVALUE{$_})); + } -sub printLog($;$) { - my ($link, $br, $brp); - ($_,$link) = @_; - ($br = $_) =~ s/\.\d+$//; - ($brp = $br) =~ s/\.?\d+$//; - my ($isDead, $prev); + print < + + + + + +\n"; - $link = 1 if (!defined($link)); - $isDead = ($state{$_} eq "dead"); + my $diffrev = defined($input{r1}) ? + $input{r1} : $revdisplayorder[$#revdisplayorder]; - if ($link && !$isDead) { - my ($filename); - ($filename = $where) =~ s/^.*\///; - my ($fileurl) = urlencode($filename); - print ""; - if (defined($revsym{$_})) { - foreach my $sym (split(", ", $revsym{$_})) { - print ""; - } - } - if (defined($revsym{$br}) && $revsym{$br} && !defined($nameprinted{$br})) { - foreach my $sym (split(", ", $revsym{$br})) { - print ""; - } - $nameprinted{$br} = 1; - } - print "\n Revision "; - &download_link($fileurl, $_, $_, - $defaultViewable ? "text/x-cvsweb-markup" : undef); - if ($defaultViewable) { - print " / "; - &download_link($fileurl, $_, "(download)", $mimetype); - } - if (not $defaultTextPlain) { - print " / "; - &download_link($fileurl, $_, "(as text)", - "text/plain"); - } - if (!$defaultViewable) { - print " / "; - &download_link($fileurl, $_, "(view)", "text/x-cvsweb-markup"); - } - if ($allow_annotate) { - print " - "; - print "annotate"; - } - # Plus a select link if enabled, and this version isn't selected - if ($allow_version_select) { - if ((!defined($input{"r1"}) || $input{"r1"} ne $_)) { - print " - [select for diffs]\n"; - } - else { - print " - [selected]"; - } - } - } - else { - print "Revision $_"; - } - if (/^1\.1\.1\.\d+$/) { - print " (vendor branch)"; - } - if (defined @mytz) { - my ($est) = $mytz[(localtime($date{$_}))[8]]; - print ", " . scalar localtime($date{$_}) . " $est ("; - } else { - print ", " . scalar gmtime($date{$_}) . " UTC ("; - } - print readableTime(time() - $date{$_},1) . " ago)"; - print " by "; - print "" . $author{$_} . "\n"; - print "
Branch: ",$link?link_tags($revsym{$br}):$revsym{$br},"\n" - if ($revsym{$br}); - print "
CVS Tags: ",$link?link_tags($revsym{$_}):$revsym{$_},"" - if ($revsym{$_}); - print "
Branch point for: ",$link?link_tags($branchpoint{$_}):$branchpoint{$_},"\n" - if ($branchpoint{$_}); - # Find the previous revision - my @prevrev = split(/\./, $_); - do { - if (--$prevrev[$#prevrev] <= 0) { - # If it was X.Y.Z.1, just make it X.Y - pop(@prevrev); - pop(@prevrev); - } - $prev = join(".", @prevrev); - } until (defined($date{$prev}) || $prev eq ""); - if ($prev ne "") { - if ($difflines{$_}) { - print "
Changes since $prev: $difflines{$_} lines"; - } - } - if ($isDead) { - print "
FILE REMOVED\n"; - } - elsif ($link) { - my %diffrev = (); - $diffrev{$_} = 1; - $diffrev{""} = 1; - print "
Diff"; - # - # Offer diff to previous revision - if ($prev) { - $diffrev{$prev} = 1; - print " to previous $prev\n"; - if (!$hr_default) { # offer a human readable version if not default - print "(colored)\n"; - } - } - # - # Plus, if it's on a branch, and it's not a vendor branch, - # offer a diff with the branch point. - if ($revsym{$brp} && !/^1\.1\.1\.\d+$/ && !defined($diffrev{$brp})) { - print " to branchpoint $brp\n"; - if (!$hr_default) { # offer a human readable version if not default - print "(colored)\n"; - } - } - # - # Plus, if it's on a branch, and it's not a vendor branch, - # offer to diff with the next revision of the higher branch. - # (e.g. change gets committed and then brought - # over to -stable) - if (/^\d+\.\d+\.\d+/ && !/^1\.1\.1\.\d+$/) { - my ($i,$nextmain); - for ($i = 0; $i < $#revorder && $revorder[$i] ne $_; $i++){} - my (@tmp2) = split(/\./, $_); - for ($nextmain = ""; $i > 0; $i--) { - my ($next) = $revorder[$i-1]; - my (@tmp1) = split(/\./, $next); - if ($#tmp1 < $#tmp2) { - $nextmain = $next; - last; - } - # Only the highest version on a branch should have - # a diff for the "next main". - last if (join(".",@tmp1[0..$#tmp1-1]) - eq join(".",@tmp2[0..$#tmp1-1])); - } - if (!defined($diffrev{$nextmain})) { - $diffrev{$nextmain} = 1; - print " next main $nextmain\n"; - if (!$hr_default) { # offer a human readable version if not default - print "(colored)\n"; - } - } - } - # Plus if user has selected only r1, then present a link - # to make a diff to that revision - if (defined($input{"r1"}) && !defined($diffrev{$input{"r1"}})) { - $diffrev{$input{"r1"}} = 1; - print " to selected $input{'r1'}\n"; - if (!$hr_default) { # offer a human readable version if not default - print "(colored)\n"; + printf(< + + + + + + + + +\n"; - } - } - } - print "
\n";
-	print &htmlify($log{$_}, 1);
-	print "
\n"; -} + $diffrev = defined($input{r2}) ? $input{r2} : $revdisplayorder[0]; -sub doLog { - my($fullname) = @_; - my ($diffrev, $upwhere, $filename, $backurl); - - readLog($fullname); + printf(< + + + + +
+
+
+
+Log view options + + + + + +EOF - html_header("CVS log for $where"); - ($upwhere = $where) =~ s|(Attic/)?[^/]+$||; - ($filename = $where) =~ s|^.*/||; - $backurl = $scriptname . "/" . urlencode($upwhere) . $query; - print &link($backicon, "$backurl#$filename"), - " Up to ", &clickablePath($upwhere, 1), "

\n"; - print <Request diff between arbitrary revisions -


+ if (@branchnames) { + + print < + + + + +EOF + } - print "
"; - print "\n"; - print "This form allows you to request diff's between any two\n"; - print "revisions of a file. You may select a symbolic revision\n"; - print "name using the selection box or you may type in a numeric\n"; - print "name using the type-in text box.\n"; - print "

\n"; - print "\n"; - foreach (@stickyvars) { - print "\n" - if (defined($input{$_}) - && ($input{$_} ne $DEFAULTVALUE{$_} && $input{$_} ne "")); - } - print "Diffs between \n"; - print "\n"; - $diffrev = $revdisplayorder[$#revdisplayorder]; - $diffrev = $input{"r1"} if (defined($input{"r1"})); - print "\n"; - print " and \n"; - print "\n"; - $diffrev = $revdisplayorder[0]; - $diffrev = $input{"r2"} if (defined($input{"r2"})); - print "\n"; - print "
Type of Diff should be a "; - printDiffSelect(); - print "\n"; - print "\n"; - print "


\n"; - if (@branchnames) { - print "\n"; - print "\n"; - foreach (@stickyvars) { - next if ($_ eq "only_with_tag"); - next if ($_ eq "logsort"); - print "\n" - if (defined($input{$_}) && $input{$_} ne $DEFAULTVALUE{$_} - && $input{$_} ne ""); - } - print "View only Branch: \n"; - print "\n"; - print "\n"; - print "\n"; - } - print "\n"; - print "\n"; - foreach (@stickyvars) { - next if ($_ eq "only_with_tag"); - next if ($_ eq "logsort"); - print "\n" - if (defined($input{$_}) && $input{$_} ne $DEFAULTVALUE{$_} - && $input{$_} ne ""); - } - print "Sort log by: \n"; - print "\n"; - print "\n"; - print "\n"; - print &html_footer; - print "\n"; + print < + + + +
+ + +EOF + printDiffSelect(); + print < +
+ + + +
+ + +EOF + printLogSortSelect(); + print < +
+EOF + foreach (@stickyvars) { + next if ($_ eq "f"); + next if ($_ eq "only_with_tag"); + next if ($_ eq "logsort"); + printf("\n", + $_, htmlquote($input{$_})) + if (defined($input{$_}) + && (!defined($DEFAULTVALUE{$_}) || $input{$_} ne $DEFAULTVALUE{$_})); + } + print "
\n\n"; + html_footer(); } -sub flush_diff_rows ($$$$) + +sub flush_diff_rows($$$$) { - my $j; - my ($leftColRef,$rightColRef,$leftRow,$rightRow) = @_; - if ($state eq "PreChangeRemove") { # we just got remove-lines before - for ($j = 0 ; $j < $leftRow; $j++) { - print "@$leftColRef[$j]"; - print " \n"; - } + my ($leftColRef, $rightColRef, $leftRow, $rightRow) = @_; + + return unless defined($state); + + if ($state eq "PreChangeRemove") { # we just got remove-lines before + for (my $j = 0; $j < $leftRow; $j++) { + printf(< +  %s +   + +EOF } - elsif ($state eq "PreChange") { # state eq "PreChange" - # we got removes with subsequent adds - for ($j = 0; $j < $leftRow || $j < $rightRow ; $j++) { # dump out both cols - print ""; - if ($j < $leftRow) { - print "@$leftColRef[$j]"; - } - else { - print " "; - } - if ($j < $rightRow) { - print "@$rightColRef[$j]"; - } - else { - print " "; - } - print "\n"; + } elsif ($state eq "PreChange") { # state eq "PreChange" + # we got removes with subsequent adds + for (my $j = 0; $j < $leftRow || $j < $rightRow; $j++) { # dump both cols + print "\n"; + if ($j < $leftRow) { + print ' ' . + spacedHtmlText(@$leftColRef[$j]) . ''; + } else { + print ' '; + } + print "\n"; + + if ($j < $rightRow) { + print ' ' . + spacedHtmlText(@$rightColRef[$j]) . ''; + } else { + print ' '; + } + print "\n\n"; } - } + } } -## -# Function to generate Human readable diff-files -# human_readable_diff(String revision_to_return_to); -## -sub human_readable_diff($){ - my ($i,$difftxt, $where_nd, $filename, $pathname, $scriptwhere_nd); + +# +# Generates "human readable", HTMLified diffs. +# +sub human_readable_diff($$) +{ my ($fh, $rev) = @_; - my ($date1, $date2, $r1d, $r2d, $r1r, $r2r, $rev1, $rev2, $sym1, $sym2); - my (@rightCol, @leftCol); - ($where_nd = $where) =~ s/.diff$//; - ($filename = $where_nd) =~ s/^.*\///; - ($pathname = $where_nd) =~ s/(Attic\/)?[^\/]*$//; - ($scriptwhere_nd = $scriptwhere) =~ s/.diff$//; + (my $where_nd = $where) =~ s|\.diff$||; + (my $filename = $where_nd) =~ s|^.*/||; + (my $pathname = $where_nd) =~ s|((?<=/)Attic/)?[^/]*$||; + (my $scriptwhere_nd = $scriptwhere) =~ s|\.diff$||; - navigateHeader ($scriptwhere_nd, $pathname, $filename, $rev, "diff"); + navigateHeader($scriptwhere_nd, $pathname, $filename, $rev, 'diff'); - # Read header to pick up read revision and date, if possible + # Read header to pick up read revision and date, if possible. + + my ($r1d, $r1r, $r2d, $r2r); while (<$fh>) { - ($r1d,$r1r) = /\t(.*)\t(.*)$/ if (/^--- /); - ($r2d,$r2r) = /\t(.*)\t(.*)$/ if (/^\+\+\+ /); - last if (/^\+\+\+ /); + ($r1d, $r1r) = /\t(.*)\t(.*)$/ if (/^--- /); + ($r2d, $r2r) = /\t(.*)\t(.*)$/ if (/^\+\+\+ /); + last if (/^\+\+\+ /); } + + my ($rev1, $date1); if (defined($r1r) && $r1r =~ /^(\d+\.)+\d+$/) { - $rev1 = $r1r; + $rev1 = $r1r; $date1 = $r1d; } + my ($rev2, $date2); if (defined($r2r) && $r2r =~ /^(\d+\.)+\d+$/) { - $rev2 = $r2r; + $rev2 = $r2r; $date2 = $r2d; } - - print "

Diff for /$where_nd between version $rev1 and $rev2

\n"; + $rev1 = $input{r1} unless defined($rev1); + $rev1 = $input{tr1} if (defined($rev1) && $rev1 eq 'text'); + $rev1 = 'unknown-left' unless defined($rev1); + $rev2 = $input{r2} unless defined($rev2); + $rev2 = $input{tr2} if (defined($rev2) && $rev2 eq 'text'); + $rev2 = 'unknown-right' unless defined($rev2); + $date1 = defined($date1) ? ', ' . htmlquote($date1) : ''; + $date2 = defined($date2) ? ', ' . htmlquote($date2) : ''; - print "\n"; - print "\n"; - print "\n"; - print "\n"; + my $link = uri_escape($filename) . ($query ? "$query;" : '?'); - my $fs = ""; - my $fe = ""; + # Using
"; - print "version $rev1"; - print ", $date1" if (defined($date1)); - print "
Tag: $sym1\n" if ($sym1); - print "
"; - print "version $rev2"; - print ", $date2" if (defined($date2)); - print "
Tag: $sym2\n" if ($sym1); - print "
Diff for /$where_nd between versions $rev1 and $rev2 +
+ + + + +EOF - my $leftRow = 0; + # Process diff text + # prefetch several lines + my @buf = head($fh); + my %d = scan_directives(@buf); + + my $leftRow = 0; my $rightRow = 0; - my ($oldline, $newline, $funname, $diffcode, $rest); + my ($difftxt, @rightCol, @leftCol, $oldline, $newline, $funname); - # Process diff text - # The diffrows are could make excellent use of - # cascading style sheets because we've to set the - # font and color for each row. anyone ...? - #### - while (<$fh>) { - $difftxt = $_; - - if ($difftxt =~ /^@@/) { - ($oldline,$newline,$funname) = $difftxt =~ /@@ \-([0-9]+).*\+([0-9]+).*@@(.*)/; - print "\n"; - $state = "dump"; - $leftRow = 0; - $rightRow = 0; - } - else { - ($diffcode,$rest) = $difftxt =~ /^([-+ ])(.*)/; - $_ = spacedHtmlText ($rest); + $link .= 'content-type=text%2Fx-cvsweb-markup;'; + $link .= 'ln=1;' unless ($link =~ /\?.*\bln=1\b/); - # Add fontface, size - $_ = "$fs $_$fe"; - - ######### - # little state machine to parse unified-diff output (Hen, zeller@think.de) - # in order to get some nice 'ediff'-mode output - # states: - # "dump" - just dump the value - # "PreChangeRemove" - we began with '-' .. so this could be the start of a 'change' area or just remove - # "PreChange" - okey, we got several '-' lines and moved to '+' lines -> this is a change block - ########## + while (@buf || !eof($fh)) { + $difftxt = @buf ? shift @buf : <$fh>; - if ($diffcode eq '+') { - if ($state eq "dump") { # 'change' never begins with '+': just dump out value - print "\n"; - } - else { # we got minus before - $state = "PreChange"; - $rightCol[$rightRow++] = $_; - } - } - elsif ($diffcode eq '-') { - $state = "PreChangeRemove"; - $leftCol[$leftRow++] = $_; + if ($difftxt =~ /^@@/) { + ($oldline, $newline, $funname) = + $difftxt =~ /@@ \-([0-9]+).*\+([0-9]+).*@@(.*)/; + $funname = htmlquote($funname); + $funname =~ s/\s/ /go; + $funname &&= " $funname"; + my $ol = $oldline || 1; + my $nl = $newline || 1; + + print < + + + +EOF + + $state = "dump"; + $leftRow = 0; + $rightRow = 0; + } else { + my ($diffcode, $rest) = $difftxt =~ /^([-+ ])(.*)/; + $diffcode = '' unless defined($diffcode); + $_ = $rest; + + ######### + # little state machine to parse unified-diff output (Hen, zeller@think.de) + # in order to get some nice 'ediff'-mode output + # states: + # "dump" - just dump the value + # "PreChangeRemove" - we began with '-' .. so this could be the start of a 'change' area or just remove + # "PreChange" - okey, we got several '-' lines and moved to '+' lines -> this is a change block + ########## + + if ($diffcode eq '+') { + if ($state eq "dump") + { # 'change' never begins with '+': just dump out value + $_ = spacedHtmlText($rest, $d{tabstop}); + printf(< + + + +EOF + } else { # we got minus before + $state = "PreChange"; + $rightCol[$rightRow++] = $_; } - else { # empty diffcode - flush_diff_rows \@leftCol, \@rightCol, $leftRow, $rightRow; - print "\n"; - $state = "dump"; - $leftRow = 0; - $rightRow = 0; - } + } elsif ($diffcode eq '-') { + $state = "PreChangeRemove"; + $leftCol[$leftRow++] = $_; + } else { # empty diffcode + flush_diff_rows \@leftCol, \@rightCol, $leftRow, $rightRow; + $_ = spacedHtmlText($rest, $d{tabstop}); + printf(< + + + +EOF + $state = "dump"; + $leftRow = 0; + $rightRow = 0; } + } } + close($fh); + flush_diff_rows \@leftCol, \@rightCol, $leftRow, $rightRow; # state is empty if we didn't have any change if (!$state) { - print ""; - print ""; - print ""; + print < + + + + + +EOF } - print "
+version $rev1$date1 + +version $rev2$date2 +
"; - print "
Line $oldline"; - print " $funname
"; - print "
"; - print "
Line $newline"; - print " $funname
"; - print "
 $_
+ Line $oldline$funname + + Line $newline$funname +
  %s
$_$_
 %s %s
 
- No viewable Change -
 
- No viewable change -
"; - close($fh); - print "

\n"; + printf(< +
+
+
+
+ + + + + + + + + + +
Removed from v.%s 
changed lines
 Added in v.%s
+
+
+EOF +} - print ""; - print ""; -sub navigateHeader ($$$$$) { - my ($swhere,$path,$filename,$rev,$title) = @_; - $swhere = "" if ($swhere eq $scriptwhere); - $swhere = urlencode($filename) if ($swhere eq ""); - print "<\!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0 Transitional//EN\">"; - print "\n\n"; - print ''; - print "\n$path$filename - $title - $rev\n"; - print "\n"; - print "
"; - # print legend - print "
"; - print "Legend:
\n"; - print ""; - print ""; - print ""; - print "
Removed from v.$rev1 
changed lines
 Added in v.$rev2
\n"; +# +# The passed in $path and $filename should not be URI escaped, and $swhere +# *should* be. +# +sub navigateHeader($$$$$;$) +{ + my ($swhere, $path, $filename, $rev, $title, $moddate) = @_; + $swhere = "" if ($swhere eq $scriptwhere); + $swhere = './' . uri_escape($filename) if ($swhere eq ""); - print "
"; - # Print format selector - print "
\n"; - foreach my $var (keys %input) { - next if ($var eq "f"); - next if (defined($DEFAULTVALUE{$var}) - && $DEFAULTVALUE{$var} eq $input{$var}); - print "\n"; + my $qfile = htmlquote($filename); + my $qpath = htmlquote($path); + my $trev = $rev ? " - " . htmlquote($rev) : ''; + + http_header('text/html', $moddate); + + print < + +$qpath$qfile - $title$trev +$HTML_META$CSS + + + + "; + my $backurl = "$swhere$query$frag"; - print ""; -} + print &link($backicon, $backurl); + printf 'Return to %s CVS log', &link($qfile, $backurl); + print " $fileicon
"; - print ""; - - print ""; - print "
"; - print "$backicon"; - print " Return to ", &link("$filename","$swhere$query#rev$rev")," CVS log"; - print " $fileicon$diricon Up to ", &clickablePath($path, 1), "
"; + printf(<%s Up to %s + + +EOF } -sub plural_write ($$) + +sub plural_write($$) { - my ($num,$text) = @_; - if ($num != 1) { - $text = $text . "s"; - } - if ($num > 0) { - return $num . " " . $text; - } - else { - return ""; - } + my ($num, $text) = @_; + if ($num != 1) { + $text .= "s"; + } + + if ($num > 0) { + return join (' ', $num, $text); + } else { + return ""; + } } + ## # print readable timestamp in terms of # '..time ago' # H. Zeller ## -sub readableTime ($$) +sub readableTime($$) { - my ($i, $break, $retval); - my ($secs,$long) = @_; + my ($secs, $long) = @_; - # this function works correct for time >= 2 seconds - if ($secs < 2) { - return "very little time"; - } + # This function works correctly for time >= 2 seconds. + return 'very little time' if ($secs < 2); - my %desc = (1 , 'second', - 60, 'minute', - 3600, 'hour', - 86400, 'day', - 604800, 'week', - 2628000, 'month', - 31536000, 'year'); - my @breaks = sort {$a <=> $b} keys %desc; - $i = 0; - while ($i <= $#breaks && $secs >= 2 * $breaks[$i]) { - $i++; - } + my %desc = ( + 1 => 'second', + 60 => 'minute', + 3600 => 'hour', + 86400 => 'day', + 604800 => 'week', + 2628000 => 'month', + 31536000 => 'year' + ); + + my @breaks = sort { $a <=> $b } keys %desc; + my $i = 0; + + while ($i <= $#breaks && $secs >= 2 * $breaks[$i]) { + $i++; + } + $i--; + my $break = $breaks[$i]; + my $retval = plural_write(int($secs / $break), $desc{$break}); + + if ($long == 1 && $i > 0) { + my $rest = $secs % $break; $i--; $break = $breaks[$i]; - $retval = plural_write(int ($secs / $break), $desc{$break}); - - if ($long == 1 && $i > 0) { - my $rest = $secs % $break; - $i--; - $break = $breaks[$i]; - my $resttime = plural_write(int ($rest / $break), - $desc{$break}); - if ($resttime) { - $retval = $retval . ", " . $resttime; - } + my $resttime = plural_write(int($rest / $break), $desc{$break}); + if ($resttime) { + $retval .= ", $resttime"; } + } - return $retval; + return $retval; } -## -# clickablePath(String pathname, boolean last_item_clickable) + # -# returns a html-ified path whereas each directory is a link for -# faster navigation. last_item_clickable controls whether the -# basename (last directory/file) is a link as well -## -sub clickablePath($$) { - my ($pathname,$clickLast) = @_; - my $retval = ''; - - if ($pathname eq '/') { - # this should never happen - chooseCVSRoot() is - # intended to do this - $retval = "[$cvstree]"; +# Returns a htmlified path where each directory is a link for faster +# navigation. $clickLast controls whether the basename +# (last directory/file) is a link as well. The passed in $pathname should +# *not* be URI escaped. +# +sub clickablePath($$) +{ + my ($pathname, $clickLast) = @_; + + my $root = '[' . htmlquote($CVSROOTdescr{$cvstree} || $cvstree) . ']'; + + # This should never happen (see chooseCVSRoot()), but let's be sure... + return $root if ($pathname eq '/'); + + my $retval = + ' ' . &link($root, sprintf('%s/%s#dirlist', $scriptname, $query)); + my $wherepath = ''; + my ($lastslash) = $pathname =~ m|/$|; + + foreach (split(m|/|, $pathname)) { + $retval .= ' / '; + $wherepath .= "/$_"; + my $last = "$wherepath/" eq "/$pathname" || $wherepath eq "/$pathname"; + + if ($clickLast || !$last) { + $retval .= &link(htmlquote($_), + join ('', + $scriptname, uri_escape_path($wherepath), + (!$last || $lastslash ? '/' : ''), $query, + (!$last || $lastslash ? "#dirlist" : ""))); + } else { # do not make a link to the current dir + $retval .= htmlquote($_); } - else { - $retval = $retval . " [$cvstree]"; - my $wherepath = ''; - my ($lastslash) = $pathname =~ m|/$|; - foreach (split(/\//, $pathname)) { - $retval = $retval . " / "; - $wherepath = $wherepath . '/' . $_; - my ($last) = "$wherepath/" eq "/$pathname" - || $wherepath eq "/$pathname"; - if ($clickLast || !$last) { - $retval = $retval . "$_"; - } - else { # do not make a link to the current dir - $retval = $retval . $_; - } - } - } - return $retval; + } + return $retval; } -sub chooseCVSRoot() { - my @foo; - foreach (sort keys %CVSROOT) { - if (-d $CVSROOT{$_}) { - push(@foo, $_); - } + +sub chooseCVSRoot() +{ + print "
\n

\n"; + if (2 <= @CVSROOT) { + foreach my $k (keys %input) { + printf("\n", + htmlquote($k), htmlquote($input{$k})) + if ($input{$k} && $k ne 'cvsroot'); } - if (@foo > 1) { - my ($k); - print "\n"; - foreach $k (keys %input) { - print "\n" - if ($input{$k}) && ($k ne "cvsroot"); - } - # Form-Elements look wierd in Netscape if the background - # isn't gray and the form elements are not placed - # within a table ... - print ""; - print ""; - print ""; - print ""; - print "
CVS Root:\n\n

"; + + print <CVS Root: +'; + } else { + + # no choice -- but we need the form to select module/path, + # at least for Netscape + printf "CVS Root: [%s]", + htmlquote($CVSROOTdescr{$cvstree} || $cvstree); + } + + print < +Module path or alias: + + + +

+ +EOF } -sub chooseMirror() { - my ($mirror,$moremirrors); - $moremirrors = 0; - # This code comes from the original BSD-cvsweb - # and may not be useful for your site; If you don't - # set %MIRRORS this won't show up, anyway - # - # Should perhaps exlude the current site somehow.. - if (keys %MIRRORS) { - print "\nThis cvsweb is mirrored in:\n"; - foreach $mirror (keys %MIRRORS) { - print ", " if ($moremirrors); - print qq($mirror\n); - $moremirrors = 1; - } - print "

\n"; - } + +sub chooseMirror() +{ + # This code comes from the original BSD-cvsweb + # and may not be useful for your site; If you don't + # set %MIRRORS this won't show up, anyway. + scalar(%MIRRORS) or return; + + # Should perhaps exclude the current site somehow... + print "\n

\nThis CVSweb is mirrored in\n"; + + my @tmp = map(&link(htmlquote($_), $MIRRORS{$_}), sort keys %MIRRORS); + my $tmp = pop (@tmp); + + if (scalar(@tmp)) { + print join (', ', @tmp), ' and '; + } + + print "$tmp.\n

\n"; } -sub fileSortCmp { - my ($comp) = 0; - my ($c,$d,$af,$bf); - ($af = $a) =~ s/,v$//; - ($bf = $b) =~ s/,v$//; - my ($rev1,$date1,$log1,$author1,$filename1) = @{$fileinfo{$af}} - if (defined($fileinfo{$af})); - my ($rev2,$date2,$log2,$author2,$filename2) = @{$fileinfo{$bf}} - if (defined($fileinfo{$bf})); +sub fileSortCmp() +{ + (my $af = $a) =~ s/,v$//; + (my $bf = $b) =~ s/,v$//; + my ($rev1, $date1, $log1, $author1, $filename1) = @{$fileinfo{$af}} + if (defined($fileinfo{$af})); + my ($rev2, $date2, $log2, $author2, $filename2) = @{$fileinfo{$bf}} + if (defined($fileinfo{$bf})); - if (defined($filename1) && defined($filename2) && $af eq $filename1 && $bf eq $filename2) { - # Two files - $comp = -revcmp($rev1, $rev2) if ($byrev && $rev1 && $rev2); - $comp = ($date2 <=> $date1) if ($bydate && $date1 && $date2); - $comp = ($log1 cmp $log2) if ($bylog && $log1 && $log2); - $comp = ($author1 cmp $author2) if ($byauthor && $author1 && $author2); + my $comp = 0; + if (defined($filename1) && defined($filename2) && + $af eq $filename1 && $bf eq $filename2) + { + + # Two files + $comp = -revcmp($rev1, $rev2) if ($byrev && $rev1 && $rev2); + $comp = ($date2 <=> $date1) if ($bydate && $date1 && $date2); + if ($input{ignorecase}) { + $comp = (uc($log1) cmp uc($log2)) if ($bylog && $log1 && $log2); + $comp = (uc($author1) cmp uc($author2)) if ($byauthor && + $author1 && $author2); + } else { + $comp = ($log1 cmp $log2) if ($bylog && $log1 && $log2); + $comp = ($author1 cmp $author2) if ($byauthor && + $author1 && $author2); } - if ($comp == 0) { - # Directories first, then sorted on name if no other sort critera - # available. - my $ad = ((-d "$fullname/$a")?"D":"F"); - my $bd = ((-d "$fullname/$b")?"D":"F"); - ($c=$a) =~ s|.*/||; - ($d=$b) =~ s|.*/||; - $comp = ("$ad$c" cmp "$bd$d"); + } + + if ($comp == 0) { + + # Directories first, then files under version control, + # then other, "rogue" files. + # Sort by filename if no other criteria available. + + my $ad = ( + (-d "$fullname/$a") + ? 'D' + : (defined($fileinfo{$af}) ? 'F' : 'R') + ); + my $bd = ( + (-d "$fullname/$b") + ? 'D' + : (defined($fileinfo{$bf}) ? 'F' : 'R') + ); + (my $c = $a) =~ s|.*/||; + (my $d = $b) =~ s|.*/||; + + my ($l, $r) = ("$ad$c", "$bd$d"); + $comp = $input{ignorecase} ? (uc($l) cmp uc($r)) : ($l cmp $r); + + # Parent dir is always first, then Attic. + if ($comp != 0) { + if ($l eq 'D..') { + $comp = -1; + } elsif ($r eq 'D..') { + $comp = 1; + } elsif ($l eq 'DAttic') { + $comp = -1; + } elsif ($r eq 'DAttic') { + $comp = 1; + } } - return $comp; + } + return $comp; } -# make A url for downloading -sub download_url { - my ($url,$revision,$mimetype) = @_; +# +# Returns a URL to download the selected revision. +# Expects the passed in URL to be URI escaped, relative, and without a query +# string. +# +sub download_url($$;$) +{ + my ($url, $revision, $mimetype) = @_; + my @dots = $revision =~ /\./g; + $revision =~ s/\b0\.(?=\d+$)// if (scalar(@dots) & 1); - $revision =~ s/\b0\.//; + if (!defined($mimetype) || $mimetype !~ CVSWEBMARKUP) { + my $path = $where; + $path =~ s|[^/]+$||; + $url = "$scriptname/$CheckoutMagic/$path$url"; + } + $url .= '?rev=' . uri_escape($revision); + $url .= ';content-type=' . uri_escape($mimetype) if $mimetype; - if (defined($checkout_magic) - && (!defined($mimetype) || $mimetype ne "text/x-cvsweb-markup")) { - my ($path); - ($path = $where) =~ s|/[^/]*$|/|; - $url = "$scriptname/$checkoutMagic/${path}$url"; - } - $url .= "?rev=$revision"; - $url .= "&content-type=$mimetype" if (defined($mimetype)); + return $url; +} - return $url; +# +# Returns a link to download the selected revision. +# Expects the passed in URL to be URI escaped, relative, +# and without a query string. +# +sub download_link($$$;$) +{ + my ($url, $revision, $textlink, $mimetype) = @_; + return sprintf('%s', + download_url($url, $revision, $mimetype) . $barequery, + htmlquote($textlink)); } -# Presents a link to download the -# selected revision -sub download_link { - my ($url,$revision,$textlink,$mimetype) = @_; - my ($fullurl) = download_url($url,$revision,$mimetype); - my ($paren) = $textlink =~ /^\(/; - $textlink =~ s/^\(// if ($paren); - $textlink =~ s/\)$// if ($paren); - print "(" if ($paren); - print "$textlink"; - print ")" if ($paren); +# +# Returns a URL to display the selected revision. +# Expects the passed in URL to be URI escaped, and without a query string. +# +sub display_url($$;$) +{ + my ($url, $revision, $mimetype) = @_; + $url .= '?rev=' . uri_escape($revision); + $url .= ';content-type=' . uri_escape($mimetype) if $mimetype; + return $url; } +# +# Returns a link to display the selected revision. +# Expects the passed in URL to be URI escaped, and without a query string. +# +sub display_link($$;$$) +{ + my ($url, $revision, $textlink, $mtype) = @_; + $textlink = $revision unless defined($textlink); + return sprintf('%s', + display_url($url, $revision, $mtype) . $barequery, + htmlquote($textlink)); +} + # Returns a Query string with the # specified parameter toggled -sub toggleQuery($$) { - my ($toggle,$value) = @_; - my ($newquery,$var); - my (%vars); - %vars = %input; - if (defined($value)) { - $vars{$toggle} = $value; +sub toggleQuery($;$) +{ + my ($toggle, $value) = @_; + + my %vars = %input; + + if (defined($value)) { + $vars{$toggle} = $value; + } else { + $vars{$toggle} = $vars{$toggle} ? 0 : 1; + } + + # Build a new query of non-default paramenters + my $newquery = ""; + foreach my $var (@stickyvars) { + my ($value) = defined($vars{$var}) ? $vars{$var} : ""; + my ($default) = defined($DEFAULTVALUE{$var}) ? $DEFAULTVALUE{$var} : ""; + + if ($value ne $default) { + $newquery .= ';' if ($newquery ne ""); + $newquery .= uri_escape($var) . '=' . uri_escape($value); } - else { - $vars{$toggle} = $vars{$toggle} ? 0 : 1; - } - # Build a new query of non-default paramenters - $newquery = ""; - foreach $var (@stickyvars) { - my ($value) = defined($vars{$var}) ? $vars{$var} : ""; - my ($default) = defined($DEFAULTVALUE{$var}) ? $DEFAULTVALUE{$var} : ""; - if ($value ne $default) { - $newquery .= "&" if ($newquery ne ""); - $newquery .= urlencode($var) . "=" . urlencode($value); - } - } - if ($newquery) { - return '?' . $newquery; - } - return ""; + } + + if ($newquery) { + return '?' . $newquery; + } + return ""; } -sub urlencode { - my ($in) = @_; - my ($out); - ($out = $in) =~ s/([\000-+{-\377])/sprintf("%%%02x", ord($1))/ge; - return $out; +sub htmlquote($) +{ + local ($_) = @_; + # Special Characters; RFC 1866 + s/&/&/g; + s/\"/"/g; + s/%22/"/g; + s//>/g; + return $_; } -sub http_header { - my $content_type = shift || "text/html"; - if (defined($moddate)) { - if ($is_mod_perl) { - Apache->request->header_out(Last_modified => scalar gmtime($moddate) . " GMT"); - } - else { - print "Last-Modified: " . scalar gmtime($moddate) . " GMT\r\n"; - } - } - if ($is_mod_perl) { - Apache->request->content_type($content_type); - } - else { - print "Content-type: $content_type\r\n"; - } - if ($allow_compress && $maycompress) { - my $fh = do {local(*FH);}; - if (defined($GZIPBIN) && open($fh, "|$GZIPBIN -1 -c")) { - if ($is_mod_perl) { - Apache->request->content_encoding("x-gzip"); - Apache->request->header_out(Vary => "Accept-Encoding"); - Apache->request->send_http_header; - } - else { - print "Content-encoding: x-gzip\r\n"; - print "Vary: Accept-Encoding\r\n"; #RFC 2068, 14.43 - print "\r\n"; # Close headers - } - $| = 1; $| = 0; # Flush header output - select ($fh); -# print "" if ($content_type eq "text/html"); - } - else { - if ($is_mod_perl) { - Apache->request->send_http_header; - } - else { - print "\r\n"; # Close headers - } - print "Unable to find gzip binary in the \$PATH to compress output
"; - } - } - else { - if ($is_mod_perl) { - Apache->request->send_http_header; - } - else { - print "\r\n"; # Close headers - } - } +sub htmlunquote($) +{ + local ($_) = @_; + # Special Characters; RFC 1866 + s/"/\"/g; + s/<//g; + s/&/&/g; + return $_; } -sub html_header($) { - my ($title) = @_; - my $version = '$zRevision: 1.93 $ $Revision: 3.9 $'; - http_header(); - print < +sub uri_escape_path($) +{ + return join('/', map(uri_escape($_), split(m|/+|, shift, -1))); +} + +sub http_header(;$$) +{ + my ($content_type, $moddate) = @_; + $content_type ||= 'text/html'; + + $content_type .= "; charset=$charset" + if ($charset && $content_type =~ m,^text/,); + + # Note that in the following, we explicitly join() and concatenate the + # headers instead of printing them as an array. This is because some + # systems, eg. early versions of mod_perl 2 don't quite get it if the + # last \r\n\r\n isn't included in the last "payload" header print(). + + my @headers = (); + # TODO: ctime(3) from scalar gmtime() isn't HTTP compliant, see HTTP::Date. + push(@headers, 'Last-Modified: ' . scalar gmtime($moddate) . ' GMT') + if $moddate; + push(@headers, 'Content-Type: ' . $content_type); + push(@headers, "Content-Security-Policy: default-src 'none'; " . + "img-src 'self'; style-src 'unsafe-inline'"); + + if ($allow_compress && $maycompress) { + push(@headers, 'Content-Encoding: gzip'); + push(@headers, 'Vary: Accept-Encoding'); # RFC 2616, 14.44 + print join("\r\n", @headers) . "\r\n\r\n"; + + $| = 1; + $| = 0; # Flush header output. + + tie(*GZIP, __PACKAGE__, \*STDOUT); + select(GZIP); + $gzip_open = 1; + } else { + print join("\r\n", @headers) . "\r\n\r\n"; + } +} + + +sub html_header($;$) +{ + my ($title, $moddate) = @_; + $title = htmlquote($title); + my $l = $logo || ''; + my $css = $CSS || ''; + http_header('text/html', $moddate); + print < + $title - - -$body_tag -$logo

$title

+$HTML_META$css + +$l

$title

EOH } -sub html_footer { - return "
$address
\n"; +sub html_footer() +{ + print "
\n
$address
\n" if $address; + print "\n\n"; } -sub link_tags +sub link_tags($) { - my ($tags) = @_; - my ($ret) = ""; - my ($fileurl,$filename); + my ($tags) = @_; - ($filename = $where) =~ s/^.*\///; - $fileurl = urlencode($filename); + (my $filename = $where) =~ s|^.*/||; + my $fileurl = './' . uri_escape($filename); - foreach my $sym (split(", ", $tags)) { - $ret .= ",\n" if ($ret ne ""); - $ret .= "$sym"; - } - return $ret."\n"; + my $ret = ""; + foreach my $sym (split(", ", $tags)) { + $ret .= ",\n" if ($ret ne ""); + $ret .= &link(htmlquote($sym), + $fileurl . toggleQuery('only_with_tag', $sym)); + } + return $ret; } + # -# See if a module is listed in the config file's @HideModule list. +# See if a file/dir is listed in the config file's @ForbiddenFiles list. +# Takes a full file system path or one relative to $cvsroot, and strips the +# trailing ",v" if present, then compares. Returns 1 if forbidden, else 0. # -sub forbidden_module { - my($module) = @_; - - for (my $i=0; $i < @HideModules; $i++) { - return 1 if $module eq $HideModules[$i]; - } +sub forbidden($) +{ + (my $path = canonpath(shift)) =~ s/,v$//; + $path =~ s|^$cvsroot/+||; + for my $forbidden_re (@ForbiddenFiles) { + return 1 if ($path =~ $forbidden_re); + } + return 0; +} - return 0; + +# +# Starts a process using IPC::Run. All arguments are passed to +# IPC::Run::start() as-is. Returns an array ($harness, $error) where +# $harness is from IPC::Run if start() succeeds, undef otherwise. In case +# of an error, $error contains the error message. +# +sub startproc(@) +{ + my $h = my $err = undef; + eval { + local $SIG{__DIE__}; + $h = IPC::Run::start(@_) or die("return code: $?"); + }; + if ($@) { + $h->finish() if $h; + $h = undef; + $err = "'@{$_[0]}' failed: $@"; + } + return ($h, $err); } + +# +# Runs a process using IPC::Run. All arguments are passed to +# IPC::Run::run() as-is. Returns an array ($exitcode, $errormsg). +# +sub runproc(@) +{ + eval { + local $SIG{__DIE__}; + IPC::Run::run(@_); + }; + my $exitcode = $? >> 8; + my $errormsg = undef; + if ($@) { + $exitcode ||= -1; + $errormsg = "'@{$_[0]}' failed: $@"; + } + return ($exitcode, $errormsg); +} + +# +# Check out a file to a temporary file. +# +sub checkout_to_temp($$$) +{ + my ($cvsroot, $cvsname, $rev) = @_; + + # Pipe given cvs file into a temporary place. + my ($temp_fh, $temp_fn) = tempfile('.cvsweb.XXXXXXXX', DIR => tmpdir()); + + my @cmd = ($CMD{cvs}, @cvs_options, '-Qd', $cvsroot, + 'co', '-p', "-r$rev", $cvsname); + + local (*DIFF_OUT); + my ($h, $err) = startproc(\@cmd, \"", '>pipe', \*DIFF_OUT); + if ($h) { + local $/ = undef; + print $temp_fh ; + $h->finish(); + close($temp_fh); + } else { + close($temp_fh); + unlink($temp_fn); + fatal('500 Internal Error', + 'Checkout failure (exit status %s), output:
%s
', + $? >> 8 || -1, $err); + } + + return $temp_fn; +} + +# +# Close the GZIP handle, and remove the tie. +# +sub gzipclose +{ + if ($gzip_open) { + select(STDOUT); + close(GZIP); + untie *GZIP; + $gzip_open = 0; + } +} + +# implement a gzipped file handle via the Compress:Zlib compression +# library. + +sub MAGIC1() { 0x1f } +sub MAGIC2() { 0x8b } +sub OSCODE() { 3 } + +sub TIEHANDLE +{ + my ($class, $out) = @_; + my ($d) = Compress::Zlib::deflateInit( + -Level => Compress::Zlib::Z_BEST_COMPRESSION(), + -WindowBits => -Compress::Zlib::MAX_WBITS() + ) + or return undef; + my ($o) = { handle => $out, + dh => $d, + crc => 0, + len => 0, + }; + my ($header) = pack("C10", + MAGIC1, MAGIC2, Compress::Zlib::Z_DEFLATED(), + 0, 0, 0, 0, 0, 0, OSCODE); + print {$o->{handle}} $header; + return bless($o, $class); +} + +sub PRINT +{ + my ($o) = shift; + my ($buf) = join (defined($,) ? $, : "", @_); + my ($len) = length($buf); + my ($compressed, $status) = $o->{dh}->deflate($buf); + print {$o->{handle}} $compressed if defined($compressed); + $o->{crc} = Compress::Zlib::crc32($buf, $o->{crc}); + $o->{len} += $len; + return $len; +} + +sub PRINTF +{ + my ($o) = shift; + my ($fmt) = shift; + my ($buf) = sprintf($fmt, @_); + my ($len) = length($buf); + my ($compressed, $status) = $o->{dh}->deflate($buf); + print {$o->{handle}} $compressed if defined($compressed); + $o->{crc} = Compress::Zlib::crc32($buf, $o->{crc}); + $o->{len} += $len; + return $len; +} + +sub WRITE +{ + my ($o, $buf, $len, $off) = @_; + my ($compressed, $status) = $o->{dh}->deflate(substr($buf, 0, $len)); + print {$o->{handle}} $compressed if defined($compressed); + $o->{crc} = Compress::Zlib::crc32(substr($buf, 0, $len), $o->{crc}); + $o->{len} += $len; + return $len; +} + +sub CLOSE +{ + my ($o) = @_; + return if !defined($o->{dh}); + my ($buf) = $o->{dh}->flush(); + $buf .= pack("V V", $o->{crc}, $o->{len}); + print {$o->{handle}} $buf; + undef $o->{dh}; +} + +sub DESTROY +{ + my ($o) = @_; + CLOSE($o); +} + +# Local variables: +# indent-tabs-mode: nil +# cperl-indent-level: 2 +# End: