Annotation of cvsweb/cvsweb.cgi, Revision 1.45.2.91
1.45.2.91! simon 1: #!/usr/bin/perl -T
1.1 jfieber 2: #
1.45.2.46 knu 3: # cvsweb - a CGI interface to CVS trees.
1.1 jfieber 4: #
1.45.2.47 knu 5: # Written in their spare time by
1.45.2.85 scop 6: # Bill Fenner <fenner@FreeBSD.org> (original work)
7: # extended by Henner Zeller <zeller@think.de>,
8: # Henrik Nordstrom <hno@hem.passagen.se>
9: # Ken Coar <coar@Apache.Org>
10: # Dick Balaska <dick@buckosoft.com>
11: # Akinori MUSHA <knu@FreeBSD.org>
12: # Jens-Uwe Mager <jum@helios.de>
13: # Ville Skyttä <scop@FreeBSD.org>
14: # Vassilii Khachaturov <vassilii@tarunz.org>
1.45.2.46 knu 15: #
16: # Based on:
17: # * Bill Fenners cvsweb.cgi revision 1.28 available from:
1.45.2.78 knu 18: # http://www.FreeBSD.org/cgi/cvsweb.cgi/www/en/cgi/cvsweb.cgi
1.1 jfieber 19: #
1.21 wosch 20: # Copyright (c) 1996-1998 Bill Fenner
1.45.2.46 knu 21: # (c) 1998-1999 Henner Zeller
1.45.2.84 knu 22: # (c) 1999 Henrik Nordstrom
23: # (c) 2000-2002 Akinori MUSHA
1.45.2.91! simon 24: # (c) 2002-2005 Ville Skyttä
1.45.2.86 scop 25: # All rights reserved.
1.21 wosch 26: #
27: # Redistribution and use in source and binary forms, with or without
28: # modification, are permitted provided that the following conditions
29: # are met:
30: # 1. Redistributions of source code must retain the above copyright
31: # notice, this list of conditions and the following disclaimer.
32: # 2. Redistributions in binary form must reproduce the above copyright
33: # notice, this list of conditions and the following disclaimer in the
34: # documentation and/or other materials provided with the distribution.
35: #
36: # THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
37: # ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
38: # IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
39: # ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
40: # FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
41: # DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
42: # OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
43: # HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
44: # LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
45: # OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
46: # SUCH DAMAGE.
47: #
1.45.2.91! simon 48: # $FreeBSD: www/en/cgi/cvsweb.cgi,v 1.1.1.37 2007/03/17 21:52:33 simon Exp $
1.45.2.75 knu 49: # $zId: cvsweb.cgi,v 1.112 2001/07/24 13:03:16 hzeller Exp $
1.45.2.78 knu 50: # $Idaemons: /home/cvs/cvsweb/cvsweb.cgi,v 1.84 2001/10/07 20:50:10 knu Exp $
1.21 wosch 51: #
1.45.2.46 knu 52: ###
1.21 wosch 53:
1.45.2.91! simon 54: require 5.006;
1.45.2.64 knu 55:
1.45.2.46 knu 56: use strict;
1.21 wosch 57:
1.45.2.91! simon 58: use warnings;
! 59: use filetest qw(access);
! 60:
1.45.2.46 knu 61: use vars qw (
1.45.2.91! simon 62: $VERSION $CheckoutMagic $MimeTypes $DEBUG
! 63: $config $allow_version_select
! 64: @CVSrepositories @CVSROOT %CVSROOT %CVSROOTdescr
! 65: %MIRRORS %DEFAULTVALUE %ICONS %MTYPES
! 66: %DIFF_COMMANDS @DIFFTYPES %DIFFTYPES @LOGSORTKEYS %LOGSORTKEYS
! 67: %alltags %fileinfo %tags @branchnames %nameprinted
! 68: %symrev %revsym @allrevisions %date %author @revdisplayorder
! 69: @revisions %state %difflines %log %branchpoint @revorder $keywordsubstitution
! 70: $prcgi @prcategories $re_prcategories $prkeyword $re_prkeyword $mancgi
! 71: $doCheckout $scriptname $scriptwhere
! 72: $where $Browser $nofilelinks $maycompress @stickyvars %funcline_regexp
! 73: $is_links $is_lynx $is_w3m $is_msie $is_mozilla3 $is_textbased
! 74: %input $query $barequery $sortby $bydate $byrev $byauthor
! 75: $bylog $byfile $defaultDiffType $logsort $cvstree $cvsroot
! 76: $charset $output_filter
! 77: @command_path %CMD $allow_compress $backicon $diricon $fileicon $graphicon
! 78: $fullname $cvstreedefault $logo $defaulttitle $address $binfileicon
! 79: $long_intro $short_instruction $shortLogLen $show_author
! 80: $tablepadding $hr_breakable $showfunc $hr_ignwhite $hr_ignkeysubst
! 81: $inputTextSize $mime_types $allow_annotate $allow_markup $allow_mailtos
! 82: $allow_log_extra $allow_dir_extra $allow_source_extra
! 83: $allow_cvsgraph $cvsgraph_config $use_java_script $edit_option_form
! 84: $show_subdir_lastmod $show_log_in_markup $preformat_in_markup
! 85: $tabstop $state $annTable $sel @ForbiddenFiles
! 86: $use_descriptions %descriptions @mytz $dwhere
! 87: $use_moddate $gzip_open $file_list_len
! 88: $allow_tar @tar_options @gzip_options @zip_options @cvs_options
! 89: @annotate_options @rcsdiff_options
! 90: $HTML_DOCTYPE $HTML_META $cssurl $CSS $cvshistory_url
! 91: $allow_enscript @enscript_options %enscript_types
1.45.2.46 knu 92: );
93:
1.45.2.91! simon 94: use Cwd qw(abs_path);
! 95: use File::Basename qw(dirname);
! 96: use File::Path qw(rmtree);
! 97: use File::Spec::Functions qw(canonpath catdir catfile curdir devnull rootdir
! 98: tmpdir updir);
! 99: use File::Temp qw(tempdir tempfile);
! 100: use IPC::Run qw();
! 101: use Time::Local qw(timegm);
! 102: use URI::Escape qw(uri_escape uri_unescape);
! 103:
! 104: use constant VALID_PATH => qr/^([[:^cntrl:]]+)$/o;
! 105: use constant VALID_TAG1 => qr/^([a-zA-Z][[:graph:]]*)$/o;
! 106: use constant VALID_TAG2 => qr/^([^\$,.:;@]+)$/o;
! 107: use constant CVSWEBMARKUP => qr{^text/(x-cvsweb|vnd\.viewcvs)-markup$}io;
! 108: use constant LOG_FILESEPR => qr/^={77}$/o;
! 109: use constant LOG_REVSEPR => qr/^-{28}$/o;
! 110:
! 111: use constant HAS_ZLIB => eval { require Compress::Zlib; };
! 112: use constant HAS_EDIFF => eval { require String::Ediff; };
! 113:
! 114: # -----------------------------------------------------------------------------
! 115:
! 116: # All global initialization that can be done in compile time should go to
! 117: # the BEGIN block. Persistent environments, such as mod_perl, will benefit
! 118: # from this.
! 119:
! 120: BEGIN
! 121: {
! 122: $VERSION = '3.0.6';
! 123:
! 124: $HTML_DOCTYPE =
! 125: '<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" ' .
! 126: '"http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">';
! 127:
! 128: $HTML_META = <<EOM;
! 129: <meta name="robots" content="nofollow" />
! 130: <meta name="generator" content="FreeBSD-CVSweb $VERSION" />
! 131: <meta http-equiv="Content-Script-Type" content="text/javascript" />
! 132: <meta http-equiv="Content-Style-Type" content="text/css" />
! 133: EOM
! 134:
! 135: # Use MIME::Types for MIME type lookups if it's available.
! 136: eval {
! 137: require MIME::Types;
! 138: $MimeTypes = MIME::Types->new(only_complete => 1);
! 139: };
! 140: $MimeTypes = undef if $@;
! 141:
! 142: $CheckoutMagic = '~checkout~';
! 143:
! 144: $cgi_style::hsty_base = 'http://www.FreeBSD.org';
! 145: $_ = q$FreeBSD: www/en/cgi/cvsweb.cgi,v 1.89 2005/10/28 14:55:57 fenner Exp $;
! 146: @_ = split;
! 147: $cgi_style::hsty_date = "@_[3,4]";
! 148:
! 149: # warningproof
! 150: 0 if $cgi_style::hsty_base ne $cgi_style::hsty_date;
! 151:
! 152: package cgi_style;
! 153: require "./cgi-style.pl";
! 154: package main;
! 155: }
! 156:
! 157: # -----------------------------------------------------------------------------
! 158:
1.45.2.47 knu 159: sub printDiffSelect($);
1.45.2.91! simon 160: sub printDiffSelectStickyVars();
! 161: sub getDiffLinks($$$);
1.45.2.56 knu 162: sub printLogSortSelect($);
1.45.2.47 knu 163: sub findLastModifiedSubdirs(@);
1.45.2.56 knu 164: sub htmlify_sub(&$);
1.45.2.47 knu 165: sub htmlify($;$);
1.45.2.51 knu 166: sub spacedHtmlText($;$);
1.45.2.47 knu 167: sub link($$);
168: sub revcmp($$);
1.45.2.82 knu 169: sub fatal($$@);
1.45.2.91! simon 170: sub config_error($$);
! 171: sub redirect($;$);
1.45.2.47 knu 172: sub safeglob($);
1.45.2.67 knu 173: sub search_path($);
1.45.2.91! simon 174: sub getEnscriptHL($);
! 175: sub getMimeType($;$);
1.45.2.51 knu 176: sub head($;$);
177: sub scan_directives(@);
1.45.2.78 knu 178: sub openOutputFilter();
1.45.2.47 knu 179: sub doAnnotate($$);
1.45.2.91! simon 180: sub doCheckout($$$);
! 181: sub doEnscript($$$;$);
! 182: sub doGraph();
! 183: sub doGraphView();
! 184: sub cvswebMarkup($$$$$$;$);
1.45.2.47 knu 185: sub viewable($);
186: sub doDiff($$$$$$);
187: sub getDirLogs($$@);
188: sub readLog($;$);
1.45.2.91! simon 189: sub printLog($$$;$$);
1.45.2.47 knu 190: sub doLog($);
191: sub flush_diff_rows($$$$);
1.45.2.91! simon 192: sub human_readable_diff($$);
! 193: sub navigateHeader($$$$$;$);
1.45.2.47 knu 194: sub plural_write($$);
195: sub readableTime($$);
196: sub clickablePath($$);
197: sub chooseCVSRoot();
198: sub chooseMirror();
199: sub fileSortCmp();
200: sub download_url($$;$);
201: sub download_link($$$;$);
1.45.2.91! simon 202: sub display_url($$;$);
! 203: sub display_link($$;$$);
! 204: sub graph_link($;$);
! 205: sub history_link($$;$);
! 206: sub toggleQuery($;$);
1.45.2.56 knu 207: sub htmlquote($);
208: sub htmlunquote($);
1.45.2.91! simon 209: sub uri_escape_path($);
! 210: sub http_header(;$$);
! 211: sub html_header($;$);
1.45.2.47 knu 212: sub html_footer();
213: sub link_tags($);
1.45.2.91! simon 214: sub forbidden($);
! 215: sub startproc(@);
! 216: sub runproc(@);
! 217: sub checkout_to_temp($$$);
! 218:
! 219: # Get rid of unsafe environment vars. Don't do this in the BEGIN block
! 220: # (think mod_perl)...
! 221: delete(@ENV{qw(PATH IFS CDPATH ENV BASH_ENV)});
1.45.2.67 knu 222:
1.45.2.91! simon 223: my ($mydir) = (dirname($0) =~ /(.*)/); # untaint
1.45.2.68 knu 224:
1.45.2.91! simon 225: ##### Start of Configuration Area ########
1.45.2.66 knu 226:
1.45.2.47 knu 227: # == EDIT this ==
1.45.2.53 knu 228: # Locations to search for user configuration, in order:
1.45.2.91! simon 229: for (catfile($mydir, 'cvsweb.conf'), '/usr/local/etc/cvsweb/cvsweb.conf') {
! 230: if (-r $_) {
! 231: $config = $_;
! 232: last;
! 233: }
1.45.2.46 knu 234: }
1.1 jfieber 235:
1.45.2.46 knu 236: ##### End of Configuration Area ########
237:
1.45.2.91! simon 238: undef $mydir;
! 239:
! 240: ######## Configuration parameters #########
! 241:
1.45.2.75 knu 242: @CVSrepositories = @CVSROOT = %CVSROOT = %MIRRORS = %DEFAULTVALUE = %ICONS =
1.45.2.91! simon 243: %MTYPES = %tags = %alltags = %fileinfo = %DIFF_COMMANDS = ();
! 244:
! 245: $cvstreedefault = $logo = $defaulttitle =
! 246: $address = $long_intro = $short_instruction = $shortLogLen = $show_author =
! 247: $tablepadding = $hr_breakable = $showfunc = $hr_ignwhite =
! 248: $hr_ignkeysubst = $inputTextSize = $mime_types = $allow_annotate =
! 249: $allow_markup = $allow_compress = $use_java_script = $edit_option_form =
! 250: $show_subdir_lastmod = $show_log_in_markup = $preformat_in_markup =
! 251: $tabstop = $use_moddate = $gzip_open = $DEBUG = $allow_cvsgraph =
! 252: $cvsgraph_config = $cvshistory_url = $allow_tar = undef;
1.45.2.46 knu 253:
1.45.2.91! simon 254: $allow_version_select = $allow_mailtos = $allow_log_extra = 1;
1.45.2.55 knu 255:
1.45.2.56 knu 256: @DIFFTYPES = qw(h H u c s);
257: @DIFFTYPES{@DIFFTYPES} = (
1.45.2.91! simon 258: {
! 259: 'descr' => 'colored',
! 260: 'opts' => ['-u'],
! 261: 'colored' => 1,
! 262: },
! 263: {
! 264: 'descr' => 'long colored',
! 265: 'opts' => ['--unified=15'],
! 266: 'colored' => 1,
! 267: },
! 268: {
! 269: 'descr' => 'unified',
! 270: 'opts' => ['-u'],
! 271: 'colored' => 0,
! 272: },
! 273: {
! 274: 'descr' => 'context',
! 275: 'opts' => ['-c'],
! 276: 'colored' => 0,
! 277: },
! 278: {
! 279: 'descr' => 'side by side',
! 280: # width=168 should be enough to support 80 character line lengths
! 281: 'opts' => ['--side-by-side', '--width=168'],
! 282: 'colored' => 0,
! 283: },
1.45.2.75 knu 284: );
1.45.2.56 knu 285:
286: @LOGSORTKEYS = qw(cvs date rev);
287: @LOGSORTKEYS{@LOGSORTKEYS} = (
1.45.2.91! simon 288: { descr => 'Not sorted', },
! 289: { descr => 'Commit date', },
! 290: { descr => 'Revision', },
1.45.2.75 knu 291: );
1.45.2.56 knu 292:
1.45.2.91! simon 293: ##### End of configuration parameters #####
1.45.2.56 knu 294:
1.45.2.91! simon 295: my $pathinfo = '';
! 296: if (defined($ENV{PATH_INFO}) && $ENV{PATH_INFO} ne '') {
! 297: ($pathinfo) = ($ENV{PATH_INFO} =~ VALID_PATH)
! 298: or fatal('500 Internal Error',
! 299: 'Illegal PATH_INFO in environment: <code>%s</code>',
! 300: $ENV{PATH_INFO});
! 301: }
! 302: if ($ENV{SCRIPT_NAME}) {
! 303: ($scriptname) = ($ENV{SCRIPT_NAME} =~ VALID_PATH)
! 304: or fatal('500 Internal Error',
! 305: 'Illegal SCRIPT_NAME in environment: <code>%s</code>',
! 306: $ENV{SCRIPT_NAME});
! 307: }
! 308:
! 309: $scriptname = '' unless defined($scriptname);
! 310:
! 311: $where = $pathinfo;
! 312: $doCheckout = $where =~ s|^/$CheckoutMagic/|/|o;
! 313: $where =~ s|^/||;
! 314: $scriptname =~ s|^/*|/|;
1.45.2.67 knu 315:
1.45.2.68 knu 316: # Let's workaround thttpd's stupidity..
1.45.2.67 knu 317: if ($scriptname =~ m|/$|) {
1.45.2.91! simon 318: $pathinfo .= '/';
! 319: my $re = quotemeta $pathinfo;
! 320: $scriptname =~ s/$re$//;
! 321: }
! 322:
! 323: # $scriptname : the URI escaped path to this script
! 324: # $where : the path in the CVS repository (without leading /, or only /)
! 325: # $scriptwhere: the URI escaped $scriptname + '/' + $where
! 326: $scriptname = uri_escape_path($scriptname);
! 327: $scriptwhere = join('/', $scriptname, uri_escape_path($where));
! 328: $where = '/' if ($where eq '');
! 329:
! 330: # In text-based browsers, it's very annoying to have two links per file;
! 331: # skip linking the image for them.
! 332:
! 333: $Browser = $ENV{HTTP_USER_AGENT} || '';
! 334: $is_links = ($Browser =~ m`^E?Links `);
1.45.2.75 knu 335: $is_lynx = ($Browser =~ m`^Lynx/`i);
336: $is_w3m = ($Browser =~ m`^w3m/`i);
337: $is_msie = ($Browser =~ m`MSIE`);
1.45.2.46 knu 338: $is_mozilla3 = ($Browser =~ m`^Mozilla/[3-9]`);
339:
1.45.2.56 knu 340: $is_textbased = ($is_links || $is_lynx || $is_w3m);
1.45.2.46 knu 341:
342: $nofilelinks = $is_textbased;
343:
344: # newer browsers accept gzip content encoding
345: # and state this in a header
346: # (netscape did always but didn't state it)
347: # It has been reported that these
348: # braindamaged MS-Internet Exploders claim that they
349: # accept gzip .. but don't in fact and
350: # display garbage then :-/
1.45.2.51 knu 351: # Turn off gzip if running under mod_perl and no zlib is available,
352: # piping does not work as expected inside the server.
1.45.2.91! simon 353: $maycompress = (
! 354: ((defined($ENV{HTTP_ACCEPT_ENCODING})
! 355: && $ENV{HTTP_ACCEPT_ENCODING} =~ /gzip/)
! 356: || $is_mozilla3)
! 357: && !$is_msie
! 358: && !(defined($ENV{MOD_PERL}) && !HAS_ZLIB)
! 359: );
1.1 jfieber 360:
1.45.2.91! simon 361: # Parameters that will be sticky in all constructed links/query strings.
! 362: @stickyvars =
! 363: qw(cvsroot hideattic ignorecase sortby logsort f only_with_tag ln
! 364: hidecvsroot hidenonreadable);
! 365:
! 366: #
! 367: # Load configuration.
! 368: #
1.45.2.46 knu 369: if (-f $config) {
1.45.2.91! simon 370: do "$config" or config_error($config, $@);
1.45.2.53 knu 371: } else {
1.45.2.91! simon 372: fatal("500 Internal Error",
! 373: 'Configuration not found. Set the parameter <code>$config</code> in cvsweb.cgi to your <b>cvsweb.conf</b> configuration file first.');
! 374: }
! 375:
! 376: # Try to find a readable dir where we can cd into. Some abs_path()
! 377: # implementations as well as various cvs operations require such a dir to
! 378: # work properly.
! 379: {
! 380: local $^W = 0;
! 381: for my $dir (tmpdir(), rootdir()) {
! 382: last if (-r $dir && chdir($dir));
! 383: }
! 384: }
! 385:
! 386: $CSS = $cssurl ?
! 387: sprintf("<link rel=\"stylesheet\" type=\"text/css\" href=\"%s\" />\n",
! 388: htmlquote($cssurl)) : '';
! 389:
! 390: # --- input parameters
! 391:
! 392: my %query = ();
! 393: if (defined($ENV{QUERY_STRING})) {
! 394: for my $p (split(/[;&]+/, $ENV{QUERY_STRING})) {
! 395: next unless $p;
! 396: $p =~ y/+/ /;
! 397: my ($key, $val) = split(/=/, $p, 2);
! 398: next unless defined($key);
! 399: $val = 1 unless defined($val);
! 400: ($key = uri_unescape($key)) =~ /[[:graph:]]/ or next;
! 401: ($val = uri_unescape($val)) =~ /[[:graph:]]/ or next;
! 402: $query{$key} = $val;
! 403: }
1.45.2.46 knu 404: }
405:
406: undef %input;
407:
1.45.2.91! simon 408: my $t;
! 409: for my $p (qw(graph hideattic hidecvsroot hidenonreadable ignorecase ln copt
! 410: makeimage options tarball)) {
! 411: $t = $query{$p};
! 412: if (defined($t)) {
! 413: ($input{$p}) = ($t =~ /^([01]|on)$/)
! 414: or fatal('500 Internal Error',
! 415: 'Invalid boolean value: <code>%s=%s</code>', $p, $t);
! 416: }
! 417: }
! 418: for my $p (qw(annotate r1 r2 rev tr1 tr2)) {
! 419: $t = $query{$p};
! 420: if (defined($t)) {
! 421: if (($p eq 'r1' || $p eq 'r2') && $t eq 'text') {
! 422: # Special case for the "Use text field" option in the log view diff form.
! 423: $input{$p} = $t;
! 424: next;
! 425: } elsif (($p eq 'rev' || $p eq 'annotate') && ($t eq '.' || $t eq 'HEAD')){
! 426: # Another special case, allow linking to latest revision using these.
! 427: $input{$p} = '.';
! 428: next;
! 429: }
! 430: my ($rev, $tag) = split(/:/, $t, 2);
! 431: ($input{$p}) = ($rev =~ /^(\d+(?:\.\d+)*)$/)
! 432: or fatal('500 Internal Error',
! 433: 'Invalid revision: <code>%s=%s</code>', $p, $t);
! 434: if (defined($tag)) {
! 435: ($tag) = ($tag =~ VALID_TAG1)
! 436: or fatal('500 Internal Error',
! 437: 'Invalid tag/branch name in revision: <code>%s=%s</code>',
! 438: $p, $t);
! 439: ($tag) = ($tag =~ VALID_TAG2)
! 440: or fatal('500 Internal Error',
! 441: 'Invalid tag/branch name in revision: <code>%s=%s</code>',
! 442: $p, $t);
! 443: $input{$p} .= ':' . $tag;
! 444: }
! 445: }
! 446: }
! 447: $t = defined($query{only_with_tag}) ?
! 448: $query{only_with_tag} : $query{only_on_branch}; # Backwards compatibility.
! 449: if (defined($t)) {
! 450: ($input{only_with_tag}) = ($t =~ VALID_TAG1)
! 451: or fatal('500 Internal Error',
! 452: 'Invalid tag/branch name: <code>%s</code>', $t);
! 453: ($input{only_with_tag}) = ($t =~ VALID_TAG2)
! 454: or fatal('500 Internal Error',
! 455: 'Invalid tag/branch name: <code>%s</code>', $t);
! 456: }
! 457: $t = $query{logsort};
! 458: if (defined($t)) {
! 459: ($input{logsort}) = ($t =~ /^(cvs|date|rev)$/)
! 460: or fatal('500 Internal Error',
! 461: 'Unsupported log sort key: <code>%s</code>', $t);
! 462: }
! 463: $t = $query{f};
! 464: if (defined($t)) {
! 465: ($input{f}) = ($t =~ /^(([hH]|[ucs]c?)|ext\d*)$/)
! 466: or fatal('500 Internal Error',
! 467: 'Unsupported diff format: <code>%s</code>', $t);
! 468: }
! 469: $t = $query{sortby};
! 470: if (defined($t)) {
! 471: ($input{sortby}) = ($t =~ /^(file|date|rev|author|log)$/)
! 472: or fatal('500 Internal Error',
! 473: 'Unsupported dir sort key: <code>%s</code>', $t);
! 474: }
! 475: $t = $query{'content-type'};
! 476: if (defined($t)) {
! 477: ($input{'content-type'}) = ($t =~ m|^([-0-9A-Za-z]+/[-0-9A-Za-z\.\+]+)$|)
! 478: or fatal('500 Internal Error',
! 479: 'Unsupported content type: <code>%s</code>', $t);
! 480: }
! 481: $t = $query{cvsroot};
! 482: if (defined($t)) {
! 483: ($input{cvsroot}) = ($t =~ /^([[:print:]]+)$/)
! 484: or fatal('500 Internal Error',
! 485: 'Invalid symbolic CVS root name: <code>%s</code>', $t);
! 486: }
! 487: $t = $query{path};
! 488: if (defined($t)) {
! 489: ($input{path}) = ($t =~ VALID_PATH)
! 490: or fatal('500 Internal Error',
! 491: 'Invalid path: <code>%s</code>', $t);
! 492: }
! 493: undef($t);
! 494: undef(%query);
! 495:
! 496: # --- end input parameters
! 497:
! 498: #
! 499: # CVS roots
! 500: #
! 501: my $rootfound = 0;
! 502: for (my $i = 0; $i < scalar(@CVSrepositories); $i += 2) {
! 503: my $key = $CVSrepositories[$i];
! 504: my ($descr, $root) = @{$CVSrepositories[$i+1]};
! 505: $root = canonpath($root);
! 506: unless (-d $root) {
! 507: warn("Root '$root' defined in \@CVSrepositories is not a directory, " .
! 508: 'entry ignored');
! 509: next;
! 510: }
! 511: $rootfound ||= 1;
! 512: $cvstreedefault = $key unless defined($cvstreedefault);
! 513: $CVSROOTdescr{$key} = $descr;
! 514: $CVSROOT{$key} = $root;
! 515: push(@CVSROOT, $key);
! 516: }
! 517: unless ($rootfound) {
! 518: fatal('500 Internal Error',
! 519: 'No valid CVS roots found! See <code>@CVSrepositories</code> in ' .
! 520: 'the configuration file (<code>%s</code>).',
! 521: $config);
! 522: }
! 523: undef $rootfound;
! 524:
! 525: #
! 526: # Default CVS root
! 527: #
! 528: if (!defined($CVSROOT{$cvstreedefault})) {
! 529: fatal("500 Internal Error",
! 530: '<code>$cvstreedefault</code> points to a repository (%s) not ' .
! 531: 'defined in <code>@CVSrepositories</code> in your configuration ' .
! 532: 'file (<code>%s</code>).',
! 533: $cvstreedefault,
! 534: $config);
! 535: }
! 536:
! 537: $DEFAULTVALUE{cvsroot} = $cvstreedefault;
! 538:
! 539: while (my ($key, $defval) = each %DEFAULTVALUE) {
! 540:
! 541: # Replace not given parameters with defaults.
! 542: next unless (defined($defval) && $defval =~ /\S/ && !defined($input{$key}));
! 543:
! 544: # Empty checkboxes in forms return nothing, so we define a helper parameter
! 545: # in these forms (copt) which indicates that we just set parameters with a
! 546: # checkbox.
! 547: if ($input{copt}) {
! 548:
! 549: # 'copt' is set -> the result of empty input checkbox
! 550: # -> set to zero (disable) if default is a boolean (0|1).
! 551: $input{$key} = 0 if ($defval eq '0' || $defval eq '1');
! 552:
! 553: } else {
! 554:
! 555: # 'copt' isn't set --> empty input is not the result
! 556: # of empty input checkbox --> set default.
! 557: $input{$key} = $defval;
! 558: }
1.10 wosch 559: }
1.45.2.47 knu 560:
1.45.2.46 knu 561: $barequery = "";
1.45.2.55 knu 562: my @barequery;
1.45.2.46 knu 563: foreach (@stickyvars) {
1.45.2.75 knu 564:
1.45.2.91! simon 565: # construct a query string with the sticky non default parameters set
! 566: if (defined($input{$_})
! 567: && !(defined($DEFAULTVALUE{$_}) && $input{$_} eq $DEFAULTVALUE{$_}))
! 568: {
! 569: push(@barequery, join('=', uri_escape($_), uri_escape($input{$_})));
! 570: }
! 571: }
! 572:
! 573: if ($allow_enscript) {
! 574: push(@DIFFTYPES, qw(uc cc sc));
! 575: @DIFFTYPES{qw(uc cc sc)} = (
! 576: {
! 577: 'descr' => 'unified, colored',
! 578: 'opts' => ['-u'],
! 579: 'colored' => 0,
! 580: },
! 581: {
! 582: 'descr' => 'context, colored',
! 583: 'opts' => ['-c'],
! 584: 'colored' => 0,
! 585: },
! 586: {
! 587: 'descr' => 'side by side, colored',
! 588: # width=168 should be enough to support 80 character line lengths
! 589: 'opts' => ['--side-by-side', '--width=168'],
! 590: 'colored' => 0,
! 591: },
! 592: );
! 593: } else {
! 594: # No Enscript -> respect difftype, but don't offer colorization.
! 595: if ($input{f} && $input{f} =~ /^([ucs])c$/) {
! 596: $input{f} = $1;
! 597: }
1.45.2.46 knu 598: }
1.45.2.75 knu 599:
1.45.2.46 knu 600: # is there any query ?
1.45.2.55 knu 601: if (@barequery) {
1.45.2.91! simon 602: $barequery = join (';', @barequery);
! 603: $query = "?$barequery";
! 604: $barequery = ";$barequery";
1.45.2.75 knu 605: } else {
1.45.2.91! simon 606: $query = "";
1.45.2.46 knu 607: }
1.45.2.55 knu 608: undef @barequery;
1.10 wosch 609:
1.45.2.65 knu 610: if (defined($input{path})) {
1.45.2.91! simon 611: redirect("$scriptname/$input{path}$query");
1.45.2.65 knu 612: }
613:
1.45.2.46 knu 614: # get actual parameters
1.45.2.82 knu 615: {
1.45.2.91! simon 616: my $sortby = $input{sortby} || 'file';
! 617: $bydate = 0;
! 618: $byrev = 0;
! 619: $byauthor = 0;
! 620: $bylog = 0;
! 621: $byfile = 0;
! 622: if ($sortby eq 'date') {
! 623: $bydate = 1;
! 624: } elsif ($sortby eq 'rev') {
! 625: $byrev = 1;
! 626: } elsif ($sortby eq 'author') {
! 627: $byauthor = 1;
! 628: } elsif ($sortby eq 'log') {
! 629: $bylog = 1;
! 630: } else {
! 631: $byfile = 1;
! 632: }
1.45.2.65 knu 633: }
1.45.2.46 knu 634:
1.45.2.91! simon 635: $defaultDiffType = $input{f};
! 636:
! 637: $logsort = $input{logsort};
1.10 wosch 638:
1.45.2.46 knu 639: # alternate CVS-Tree, configured in cvsweb.conf
1.45.2.91! simon 640: if ($input{cvsroot} && $CVSROOT{$input{cvsroot}}) {
! 641: $cvstree = $input{cvsroot};
1.45.2.46 knu 642: } else {
1.45.2.91! simon 643: $cvstree = $cvstreedefault;
1.45.2.46 knu 644: }
1.10 wosch 645:
1.45.2.46 knu 646: $cvsroot = $CVSROOT{$cvstree};
647:
648: # create icons out of description
1.45.2.87 scop 649: foreach my $k (keys %ICONS) {
1.45.2.91! simon 650: my ($itxt, $ipath, $iwidth, $iheight) = @{$ICONS{$k}};
! 651: no strict 'refs';
! 652: if ($ipath) {
! 653: ${"${k}icon"} =
! 654: sprintf('<img src="%s" alt="%s" border="0" width="%d" height="%d" />',
! 655: htmlquote($ipath), htmlquote($itxt), $iwidth, $iheight);
! 656: } else {
! 657: ${"${k}icon"} = $itxt;
! 658: }
1.24 wosch 659: }
660:
1.45.2.53 knu 661: my $config_cvstree = "$config-$cvstree";
662:
1.45.2.46 knu 663: # Do some special configuration for cvstrees
1.45.2.53 knu 664: if (-f $config_cvstree) {
1.45.2.91! simon 665: do "$config_cvstree"
! 666: or fatal("500 Internal Error",
! 667: 'Error in loading configuration file: %s<br /><br />%s<br />',
! 668: $config_cvstree, $@);
1.45.2.53 knu 669: }
1.45.2.55 knu 670: undef $config_cvstree;
1.24 wosch 671:
1.45.2.91! simon 672: $re_prcategories = '(?:' . join ('|', @prcategories) . ')' if @prcategories;
! 673: $re_prkeyword = quotemeta($prkeyword) if defined($prkeyword);
! 674: $prcgi .= '%s' if defined($prcgi) && $prcgi !~ /%s/;
1.45.2.46 knu 675:
1.45.2.91! simon 676: $fullname = catfile($cvsroot, $where);
1.45.2.67 knu 677:
1.45.2.91! simon 678: my $rewrite = 0;
1.45.2.67 knu 679: if ($pathinfo =~ m|//|) {
1.45.2.91! simon 680: $pathinfo =~ y|/|/|s;
! 681: $rewrite = 1;
1.45.2.67 knu 682: }
1.45.2.91! simon 683: if (-d $fullname) {
! 684: if ($pathinfo !~ m|/$|) {
! 685: $pathinfo .= '/';
! 686: $rewrite = 1;
! 687: }
! 688: } elsif ($pathinfo =~ m|/$|) {
! 689: chop $pathinfo;
! 690: $rewrite = 1;
1.45.2.46 knu 691: }
1.45.2.67 knu 692: if ($rewrite) {
1.45.2.91! simon 693: redirect($scriptname . uri_escape_path($pathinfo) . $query, 1);
1.45.2.67 knu 694: }
695: undef $rewrite;
696:
1.45.2.91! simon 697: undef $pathinfo;
! 698:
1.45.2.46 knu 699: if (!-d $cvsroot) {
1.45.2.91! simon 700: fatal("500 Internal Error",
! 701: '$CVSROOT not found!<p>The server on which the CVS tree lives is probably down. Please try again in a few minutes.');
1.45.2.46 knu 702: }
703:
704: #
1.45.2.91! simon 705: # Short-circuit forbidden things. Note that $fullname should not change
! 706: # after this, because the rest of the code assumes this check has already
! 707: # been done.
1.45.2.46 knu 708: #
1.45.2.91! simon 709: fatal('403 Forbidden', 'Access to %s forbidden.', $where)
! 710: if forbidden($fullname);
1.45.2.61 knu 711:
712: #
713: # Handle tarball downloads before any headers are output.
714: #
715: if ($input{tarball}) {
1.45.2.91! simon 716: fatal('403 Forbidden', 'Downloading tarballs is prohibited.')
! 717: unless $allow_tar;
! 718:
! 719: my ($module) = ($where =~ m,^/?(.*),); # untaint
! 720: $module =~ s,/([^/]*)$,,;
! 721: my ($ext) = ($1 =~ /(\.t(?:ar\.)?gz|\.zip)$/);
! 722: my ($basedir) = ($module =~ m,([^/]+)$,);
! 723:
! 724: if ($basedir eq '' || $module eq '') {
! 725: fatal('500 Internal Error',
! 726: 'You cannot download the top level directory.');
! 727: }
! 728:
! 729: my $istar = ($ext eq '.tar.gz' || $ext eq '.tgz');
! 730: if ($istar) {
! 731: fatal('500 Internal Error', 'tar command not found.') unless $CMD{tar};
! 732: fatal('500 Internal Error', 'gzip command not found.') unless $CMD{gzip};
! 733: }
! 734: my $iszip = ($ext eq '.zip');
! 735: if ($iszip && !$CMD{zip}) {
! 736: fatal('500 Internal Error', 'zip command not found.');
! 737: }
! 738: if (!$istar && !$iszip) {
! 739: fatal('500 Internal Error', 'Unsupported archive type.');
! 740: }
! 741:
! 742: my $tmpexportdir;
! 743: eval {
! 744: local $SIG{__DIE__};
! 745: # Don't use the CLEANUP argument to tempdir() here, since we might be under
! 746: # mod_perl (the process runs for a long time), unlink explicitly later.
! 747: $tmpexportdir = tempdir('.cvsweb.XXXXXXXX', TMPDIR => 1);
! 748: };
! 749: if ($@) {
! 750: fatal('500 Internal Error', 'Unable to make temporary directory: %s', $@);
! 751: }
! 752: if (!chdir($tmpexportdir)) {
! 753: fatal('500 Internal Error',
! 754: "Can't cd to temporary directory %s: %s", $tmpexportdir, $!);
! 755: }
! 756:
! 757: my @fatal;
! 758: my $tag = $input{only_with_tag} || 'HEAD';
! 759: $tag = 'HEAD' if ($tag eq 'MAIN');
! 760:
! 761: my @cmd =
! 762: ($CMD{cvs}, @cvs_options, '-Qd', $cvsroot, 'export', '-r', $tag,
! 763: '-d', $basedir, $module);
! 764: my $export_err;
! 765: my ($errcode, $err) = runproc(\@cmd, '2>', \$export_err);
! 766: if ($errcode) {
! 767: @fatal =
! 768: ('500 Internal Error',
! 769: 'Export failure (exit status %s), output: <pre>%s</pre>',
! 770: $errcode, $err || $export_err);
! 771:
! 772: } else {
! 773:
! 774: $| = 1; # Essential to get the buffering right.
! 775: local (*TAR_OUT);
! 776:
! 777: my (@cmd, $ctype);
! 778: if ($istar) {
! 779: my @tar = ($CMD{tar}, @tar_options, '-cf', '-', $basedir);
! 780: my @gzip = ($CMD{gzip}, @gzip_options, '-c');
! 781: push(@cmd, \@tar, '|', \@gzip);
! 782: $ctype = 'application/x-gzip';
! 783: } elsif ($iszip) {
! 784: my @zip = ($CMD{zip}, @zip_options, '-r', '-', $basedir);
! 785: push(@cmd, \@zip, \'');
! 786: $ctype = 'application/zip';
! 787: }
! 788: push(@cmd, '>pipe', \*TAR_OUT);
! 789:
! 790: my ($h, $err) = startproc(@cmd);
! 791: if ($h) {
! 792: print "Content-Type: $ctype\r\n\r\n";
! 793: local $/ = undef;
! 794: print <TAR_OUT>;
! 795: $h->finish();
! 796: } else {
! 797: @fatal = ('500 Internal Error',
! 798: '%s failure (exit status %s), output: <pre>%s</pre>',
! 799: $istar ? 'Tar' : 'Zip', $? >> 8 || -1, $err);
! 800: }
! 801: }
1.45.2.61 knu 802:
1.45.2.91! simon 803: # Clean up.
! 804: rmtree($tmpexportdir);
1.45.2.61 knu 805:
1.45.2.91! simon 806: &fatal(@fatal) if @fatal;
1.45.2.61 knu 807:
1.45.2.91! simon 808: exit;
1.45.2.61 knu 809: }
810:
1.45.2.46 knu 811: ##############################
812: # View a directory
813: ###############################
1.45.2.61 knu 814: if (-d $fullname) {
1.45.2.91! simon 815:
! 816: my $dh = do { local (*DH); };
! 817: opendir($dh, $fullname) or fatal("404 Not Found", '%s: %s', $where, $!);
! 818: my @dir = grep(!forbidden(catfile($fullname, $_)), readdir($dh));
! 819: closedir($dh);
! 820: my @subLevelFiles = findLastModifiedSubdirs(@dir) if $show_subdir_lastmod;
! 821: my @unreadable = getDirLogs($cvsroot, $where, @subLevelFiles);
! 822:
! 823: if ($where eq '/') {
! 824: html_header($defaulttitle);
! 825: $long_intro =~ s/!!CVSROOTdescr!!/$CVSROOTdescr{$cvstree}/g;
! 826: print $long_intro;
! 827: } else {
! 828: html_header($where);
! 829: my $html = (-f catfile($fullname, 'README.cvs.html,v') ||
! 830: -f catfile($fullname, 'Attic', 'README.cvs.html,v'));
! 831: my $text = (!$html &&
! 832: (-f catfile($fullname, 'README.cvs,v') ||
! 833: -f catfile($fullname, 'Attic', 'README.cvs,v')));
! 834: if ($html || $text) {
! 835: my $rev = $input{only_with_tag} || 'HEAD';
! 836: my $cr = abs_path($cvsroot) || $cvsroot;
! 837: my $co = "$where/README.cvs.html" if $html;
! 838: $co ||= "$where/README.cvs" if $text;
! 839: # abs_path() taints when run as a CGI...
! 840: if ($cr =~ VALID_PATH) {
! 841: $cr = $1;
! 842: } else {
! 843: fatal('500 Internal Error', 'Illegal CVS root: <code>%s</code>', $cr);
! 844: }
! 845: my @cmd = ($CMD{cvs}, @cvs_options, '-d', $cr, 'co', '-p', "-r$rev",$co);
! 846: local (*CVS_OUT, *CVS_ERR);
! 847: my ($h, $err) = startproc(\@cmd, \"", '>pipe', \*CVS_OUT,
! 848: '2>pipe', \*CVS_ERR);
! 849: fatal('500 Internal Error', $err) unless $h;
! 850: if ($html) {
! 851: local $/ = undef;
! 852: print <CVS_OUT>;
! 853: } else {
! 854: print "<p>\n";
! 855: while (<CVS_OUT>) {
! 856: chomp;
! 857: print htmlquote($_), '<br />';
! 858: }
! 859: print "</p>";
! 860: }
! 861: $h->finish();
! 862: }
! 863: print $short_instruction;
! 864: }
! 865:
! 866: if ($use_descriptions &&
! 867: open(DESC, catfile($cvsroot, 'CVSROOT', 'descriptions'))) {
! 868: while (<DESC>) {
! 869: chomp;
! 870: my ($dir, $description) = /(\S+)\s+(.*)/;
! 871: $descriptions{$dir} = $description;
! 872: }
! 873: close(DESC);
! 874: }
! 875:
! 876: print "<p><a name=\"dirlist\"></a></p>\n";
! 877:
! 878: # give direct access to dirs
! 879: if ($where eq '/') {
! 880: chooseMirror();
! 881: chooseCVSRoot();
! 882:
! 883: } else {
! 884: print '<p>Current directory: <b>', clickablePath($where, 0), '</b>';
! 885: if ($cvshistory_url) {
! 886: (my $d = $where) =~ s|^/*(.*?)/*$|$1|;
! 887: print ' - ', history_link($d, '');
! 888: }
! 889: print "</p>\n";
! 890: print "<p>Current tag: <b>", htmlquote($input{only_with_tag}), "</b></p>\n"
! 891: if $input{only_with_tag};
! 892: }
! 893:
! 894: print "<hr />\n";
! 895:
! 896: my $infocols = 1;
! 897:
! 898: printf(<<EOF, 'Directory index of ' . htmlquote($where));
! 899: <table class="dir" width="100%%" cellspacing="0" cellpadding="$tablepadding" summary="%s">
! 900: <tr>
! 901: EOF
! 902: printf('<th colspan="2"%s>', ($byfile ? ' class="sorted"' : ''));
! 903:
! 904: if ($byfile) {
! 905: print 'File';
! 906: } else {
! 907: print &link('File',
! 908: sprintf('./%s#dirlist', toggleQuery('sortby', 'file')));
! 909: }
! 910: print "</th>\n";
! 911:
! 912: # Do not display the other column headers if we do not have any files
! 913: # with revision information.
! 914: if (scalar(%fileinfo)) {
! 915: $infocols++;
! 916: printf('<th%s>', ($byrev ? ' class="sorted"' : ''));
! 917:
! 918: if ($byrev) {
! 919: print 'Rev.';
! 920: } else {
! 921: print &link('Rev.',
! 922: sprintf('./%s#dirlist', toggleQuery('sortby', 'rev')));
! 923: }
! 924: print "</th>\n";
! 925: $infocols++;
! 926: printf('<th%s>', ($bydate ? ' class="sorted"' : ''));
! 927:
! 928: if ($bydate) {
! 929: print 'Age';
! 930: } else {
! 931: print &link('Age',
! 932: sprintf('./%s#dirlist', toggleQuery('sortby', 'date')));
! 933: }
! 934: print "</th>\n";
! 935:
! 936: if ($show_author) {
! 937: $infocols++;
! 938: printf('<th%s>', ($byauthor ? ' class="sorted"' : ''));
! 939:
! 940: if ($byauthor) {
! 941: print 'Author';
! 942: } else {
! 943: print
! 944: &link('Author',
! 945: sprintf('./%s#dirlist', toggleQuery('sortby', 'author')));
! 946: }
! 947: print "</th>\n";
! 948: }
! 949: $infocols++;
! 950: printf('<th%s>', ($bylog ? ' class="sorted"' : ''));
! 951:
! 952: if ($bylog) {
! 953: print 'Last log entry';
! 954: } else {
! 955: print &link('Last log entry',
! 956: sprintf('./%s#dirlist', toggleQuery('sortby', 'log')));
! 957: }
! 958: print "</th>\n";
! 959: } elsif ($use_descriptions) {
! 960: print "<th>Description</th>\n";
! 961: $infocols++;
! 962: }
! 963: print "</tr>\n";
! 964:
! 965: my $dirrow = 0;
! 966:
! 967: my $i;
! 968: lookingforattic:
! 969: for ($i = 0; $i <= $#dir; $i++) {
! 970: if ($dir[$i] eq "Attic") {
! 971: last lookingforattic;
! 972: }
! 973: }
! 974:
! 975: if (!$input{hideattic}
! 976: && ($i <= $#dir)
! 977: && opendir($dh, $fullname . '/Attic'))
! 978: {
! 979: splice(@dir, $i, 1, grep((s|^|Attic/|, !m|/\.|), readdir($dh)));
! 980: closedir($dh);
! 981: }
! 982:
! 983: my $hideAtticToggleLink =
! 984: $input{hideattic}
! 985: ? ''
! 986: : &link('[hide]', sprintf('./%s#dirlist', &toggleQuery('hideattic')));
! 987:
! 988: # Sort without the Attic/ pathname.
! 989: # place directories first
! 990:
! 991: my $filesexists;
! 992: my $filesfound;
! 993:
! 994: foreach my $file (sort { &fileSortCmp } @dir) {
! 995:
! 996: next if ($file eq curdir());
! 997:
! 998: # ignore CVS lock and stale NFS files
! 999: next if ($file =~ /^\#cvs\.|^,|^\.nfs/); # \# for XEmacs cperl-mode...
! 1000:
! 1001: # Check whether to show the CVSROOT path
! 1002: next if ($input{hidecvsroot} && $where eq '/' && $file eq 'CVSROOT');
! 1003:
! 1004: # Is it a directory?
! 1005: my $isdir = -d catdir($fullname, $file);
! 1006:
! 1007: # Ignore non-readable files and directories?
! 1008: next if ($input{hidenonreadable} && (! -r _ || ($isdir && ! -x _)));
! 1009:
! 1010: my $attic = '';
! 1011: if ($file =~ s|^Attic/||) {
! 1012: $attic = ' <span class="attic">(in the Attic) ' .
! 1013: $hideAtticToggleLink . '</span>';
! 1014: }
! 1015:
! 1016: if ($file eq updir() || $isdir) {
! 1017: next if ($file eq updir() && $where eq '/');
! 1018: my ($rev, $date, $log, $author, $filename, $keywordsubst) =
! 1019: @{$fileinfo{$file}} if (defined($fileinfo{$file}));
! 1020: printf "<tr class=\"%s\">\n<td class=\"dir\" colspan=\"2\">",
! 1021: ($dirrow % 2) ? 'even' : 'odd';
! 1022:
! 1023: if ($file eq updir()) {
! 1024: my $url = "../$query";
! 1025: print $nofilelinks ? $backicon : &link($backicon, $url);
! 1026: print ' ', &link("Parent Directory", $url);
! 1027:
! 1028: } else {
! 1029: my $url = './' . uri_escape_path($file) . "/$query";
! 1030: print '<a name="', htmlquote($file), '"></a>';
! 1031: print $nofilelinks ? $diricon : &link($diricon, $url);
! 1032: print ' ', &link(htmlquote("$file/"), $url), $attic;
! 1033: if ($file eq "Attic") {
! 1034: print ' <span class="attic">',
! 1035: &link('[show]',
! 1036: sprintf('./%s#dirlist', &toggleQuery('hideattic'))),
! 1037: '</span>';
! 1038: }
! 1039: }
! 1040:
! 1041: # Show last change in dir
! 1042: if ($filename) {
! 1043: print "</td>\n<td> </td>\n<td class=\"age\">";
! 1044: print readableTime(time() - $date, 0) if $date;
! 1045: print "</td>\n<td class=\"author\">", htmlquote($author)
! 1046: if $show_author;
! 1047: print "</td>\n<td class=\"log\">";
! 1048: $filename =~ s%^[^/]+/%%;
! 1049: print &link(htmlquote("$filename/$rev"),
! 1050: sprintf('%s/%s%s#rev%s',
! 1051: uri_escape($file), uri_escape($filename),
! 1052: $query, $rev)), '<br />';
! 1053: if ($log) {
! 1054: print htmlify(substr($log, 0, $shortLogLen), $allow_dir_extra);
! 1055: print '...' if (length($log) > 80);
! 1056: }
! 1057:
! 1058: } else {
! 1059: my $dwhere = ($where ne '/' ? $where : '') . $file;
! 1060:
! 1061: if ($use_descriptions && defined $descriptions{$dwhere}) {
! 1062: print '<td colspan="', ($infocols - 1), '">';
! 1063: print $descriptions{$dwhere};
! 1064:
! 1065: } elsif ($infocols > 1) {
! 1066:
! 1067: # close the row with the appropriate number of
! 1068: # columns, so that the vertical seperators are visible
! 1069: my ($cols) = $infocols;
! 1070: while ($cols > 1) {
! 1071: print "</td>\n<td> ";
! 1072: $cols--;
! 1073: }
! 1074: }
! 1075: }
! 1076:
! 1077: print "</td>\n</tr>\n";
! 1078: $dirrow++;
! 1079:
! 1080: } elsif ($file =~ s/,v$//) {
! 1081:
! 1082: my $fileurl = ($attic ? 'Attic/' : '') . uri_escape_path($file);
! 1083: my $url = './' . $fileurl . $query;
! 1084: $filesexists++;
! 1085: next if (!defined($fileinfo{$file}));
! 1086: my ($rev, $date, $log, $author, $filename, $keywordsubst) =
! 1087: @{$fileinfo{$file}};
! 1088: my $isbinary = $keywordsubst eq 'b' ? 1 : 0;
! 1089: $filesfound++;
! 1090:
! 1091: printf "<tr class=\"%s\">\n", ($dirrow % 2) ? 'even' : 'odd';
! 1092: printf '<td class="file"%s>', $allow_cvsgraph ? '' : ' colspan="2"';
! 1093:
! 1094: my $icon = $isbinary ? $binfileicon : $fileicon;
! 1095: print $nofilelinks ? $icon : &link($icon, $url);
! 1096: print ' ', &link(htmlquote($file), $url), $attic;
! 1097: print '</td><td class="graph">', graph_link($fileurl) if $allow_cvsgraph;
! 1098: print "</td>\n<td width=\"30\">", display_link($fileurl, $rev);
! 1099: print "</td>\n<td class=\"age\">";
! 1100: print readableTime(time() - $date, 0) if $date;
! 1101: print "</td>\n<td class=\"author\">", htmlquote($author) if $show_author;
! 1102: print "</td>\n<td class=\"log\">";
! 1103:
! 1104: if ($log) {
! 1105: print htmlify(substr($log, 0, $shortLogLen), $allow_dir_extra);
! 1106: print '...' if (length $log > 80);
! 1107: }
! 1108: print "</td>\n</tr>";
! 1109: $dirrow++;
! 1110: }
! 1111: print "\n";
! 1112: }
! 1113:
! 1114: print "</table>\n";
! 1115:
! 1116: if ((my $num = scalar(@unreadable)) && ! $input{hidenonreadable}) {
! 1117: printf(<<EOF, $num, htmlquote(join(', ', @unreadable)));
! 1118: <p>
! 1119: <b>NOTE:</b> The following %d unreadable files were ignored:<br />
! 1120: <em>%s</em>
! 1121: </p>
! 1122: EOF
! 1123: }
! 1124:
! 1125: if ($filesexists && !$filesfound) {
! 1126: my $currtag = defined($input{only_with_tag}) ?
! 1127: sprintf(' (%s)', htmlquote($input{only_with_tag})) : '';
! 1128: printf(<<EOF, $filesexists, $currtag);
! 1129: <p>
! 1130: <b>NOTE:</b> There are %d files, but none matches the current tag%s.
! 1131: </p>
! 1132: EOF
! 1133: }
! 1134:
! 1135: if ($input{only_with_tag} && (!%tags || !$tags{$input{only_with_tag}})) {
! 1136: %tags = %alltags;
! 1137: }
! 1138:
! 1139: if (scalar %tags
! 1140: || $input{only_with_tag}
! 1141: || $edit_option_form
! 1142: || defined($input{options}))
! 1143: {
! 1144: print "<hr />\n";
! 1145: }
! 1146:
! 1147: if (scalar %tags || $input{only_with_tag}) {
! 1148: print "<form method=\"get\" action=\"./\">\n<p>\n";
! 1149: foreach my $var (@stickyvars) {
! 1150: printf("<input type=\"hidden\" name=\"$var\" value=\"%s\" />\n",
! 1151: htmlquote($input{$var}))
! 1152: if (defined($input{$var})
! 1153: && (!defined($DEFAULTVALUE{$var})
! 1154: || $input{$var} ne $DEFAULTVALUE{$var})
! 1155: && $var ne 'only_with_tag');
! 1156: }
! 1157: printf(<<EOF, ($use_java_script ? ' onchange="this.form.submit()"' : ''));
! 1158: <span class="nowrap">
! 1159: <label for="only_with_tag" accesskey="T">Show only files with tag:
! 1160: <select id="only_with_tag" name="only_with_tag"%s>
! 1161: <option value="">All tags / default branch</option>
! 1162: EOF
! 1163: foreach my $tag (reverse sort { lc $a cmp lc $b } keys %tags) {
! 1164: my $selected =
! 1165: defined($input{only_with_tag}) && $input{only_with_tag} eq $tag;
! 1166: printf("<option%s>%s</option>\n",
! 1167: $selected ? ' selected="selected"' : '',
! 1168: htmlquote($tag));
! 1169: }
! 1170: printf(<<EOF, htmlquote($where));
! 1171: </select>
! 1172: </label></span> <span class="nowrap">
! 1173: <label for="path" accesskey="P">Module path or alias:
! 1174: <input type="text" id="path" name="path" value="%s" size="15" /></label>
! 1175: </span>
! 1176: <input type="submit" value="Go" accesskey="G" />
! 1177: </p>
! 1178: </form>
! 1179: EOF
! 1180: }
! 1181:
! 1182: if ($allow_tar && $filesfound) {
! 1183: my ($basefile) = ($where =~ m,(?:.*/)?([^/]+),);
! 1184: my $havetar = $CMD{tar} && $CMD{gzip};
! 1185: my $havezip = $CMD{zip};
! 1186: if (defined($basefile) && $basefile ne '' && ($havetar || $havezip)) {
! 1187: my $q = ($query ? "$query;" : '?') . 'tarball=1';
! 1188: print "<hr />\n",
! 1189: '<div style="text-align: center">Download this directory in ';
! 1190: # Mangle the filename so browsers show a reasonable filename to download.
! 1191: my @types = ();
! 1192: $basefile = uri_escape($basefile);
! 1193: push(@types, &link('tarball', "$basefile.tar.gz$q")) if $havetar;
! 1194: push(@types, &link('zip archive', "$basefile.zip$q")) if $havezip;
! 1195: print join(' or ', @types), "</div>\n";
! 1196: }
! 1197: }
! 1198:
! 1199: if ($edit_option_form || defined($input{options})) {
! 1200:
! 1201: print <<EOF;
! 1202: <form method="get" action="./">
! 1203: <fieldset>
! 1204: <legend>General options</legend>
! 1205: <input type="hidden" name="copt" value="1" />
! 1206: EOF
! 1207: for my $v qw(hidecvsroot hidenonreadable) {
! 1208: printf(qq{<input type="hidden" name="%s" value="%s" />\n},
! 1209: $v, $input{$v} || 0);
! 1210: }
! 1211: if ($cvstree ne $cvstreedefault) {
! 1212: print "<input type=\"hidden\" name=\"cvsroot\" value=\"$cvstree\" />\n";
! 1213: }
! 1214: print <<EOF;
! 1215: <table summary="General options">
! 1216: <tr>
! 1217: <td class="opt-label">
! 1218: <label for="sortby" accesskey="F">Sort files by:</label>
! 1219: </td>
! 1220: <td class="opt-value">
! 1221: <select id="sortby" name="sortby">
! 1222: <option value="">File</option>
! 1223: EOF
! 1224: print "<option", $bydate ? ' selected="selected"' : '',
! 1225: " value=\"date\">Age</option>\n";
! 1226: print "<option", $byauthor ? ' selected="selected"' : '',
! 1227: " value=\"author\">Author</option>\n"
! 1228: if $show_author;
! 1229: print "<option", $byrev ? ' selected="selected"' : '',
! 1230: " value=\"rev\">Revision</option>\n";
! 1231: print "<option", $bylog ? ' selected="selected"' : '',
! 1232: " value=\"log\">Log message</option>\n";
! 1233: print <<EOF;
! 1234: </select>,
! 1235: <label for="ignorecase" accesskey="I">case-insensitive:
! 1236: EOF
! 1237: print '<input id="ignorecase" name="ignorecase" type="checkbox"',
! 1238: $input{ignorecase} ? ' checked="checked"' : '',
! 1239: " value=\"1\" /></label>\n";
! 1240: print <<EOF;
! 1241: </td>
! 1242: <td class="opt-label">
! 1243: <label for="hideattic" accesskey="A">Hide files in Attic:</label>
! 1244: </td>
! 1245: <td class="opt-value">
! 1246: EOF
! 1247: print '<input id="hideattic" name="hideattic" type="checkbox"',
! 1248: $input{hideattic} ? ' checked="checked"' : '', ' value="1" />';
! 1249: print <<EOF;
! 1250: </td>
! 1251: </tr>
! 1252: <tr>
! 1253: <td class="opt-label">
! 1254: <label for="logsort" accesskey="L">Sort log by:</label>
! 1255: </td>
! 1256: <td class="opt-value">
! 1257: EOF
! 1258: printLogSortSelect(0);
! 1259: print <<EOF;
! 1260: </td>
! 1261: <td class="opt-label">
! 1262: <label for="ln" accesskey="N">Show line numbers:</label>
! 1263: </td>
! 1264: <td class="opt-value">
! 1265: EOF
! 1266: print '<input id="ln" name="ln" type="checkbox"',
! 1267: $input{ln} ? ' checked="checked"' : '', " value=\"1\" />\n";
! 1268: print <<EOF;
! 1269: </td>
! 1270: </tr>
! 1271: <tr>
! 1272: <td class="opt-label">
! 1273: <label for="f" accesskey="D">Diff format:</label>
! 1274: </td>
! 1275: <td>
! 1276: EOF
! 1277: printDiffSelect(0);
! 1278: print <<EOF;
! 1279: </td>
! 1280: <td colspan="2" class="opt-label">
! 1281: <input type="submit" value="Change Options" accesskey="C" />
! 1282: </td>
! 1283: </tr>
! 1284: </table>
! 1285: </fieldset>
! 1286: </form>
! 1287: EOF
! 1288: }
! 1289: html_footer();
1.45.2.75 knu 1290: }
1.45.2.46 knu 1291:
1292: ###############################
1293: # View Files
1294: ###############################
1.45.2.75 knu 1295: elsif (-f $fullname . ',v') {
1.45.2.85 scop 1296:
1.45.2.91! simon 1297: if (defined($input{rev}) || $doCheckout) {
! 1298: &doCheckout($fullname, $input{rev}, $input{only_with_tag});
! 1299: gzipclose();
! 1300: exit;
! 1301: }
! 1302:
! 1303: if (defined($input{annotate}) && $allow_annotate) {
! 1304: &doAnnotate($input{annotate}, $input{only_with_tag});
! 1305: gzipclose();
! 1306: exit;
! 1307: }
! 1308:
! 1309: if (defined($input{r1}) && defined($input{r2})) {
! 1310: &doDiff($fullname, $input{r1}, $input{tr1},
! 1311: $input{r2}, $input{tr2}, $input{f});
! 1312: gzipclose();
! 1313: exit;
! 1314: }
! 1315:
! 1316: if ($allow_cvsgraph && $input{graph}) {
! 1317: if ($input{makeimage}) {
! 1318: doGraph();
! 1319: } else {
! 1320: doGraphView();
! 1321: }
! 1322: gzipclose();
! 1323: exit;
! 1324: }
1.45.2.75 knu 1325:
1.45.2.91! simon 1326: &doLog($fullname);
! 1327: }
1.45.2.75 knu 1328:
1.45.2.91! simon 1329: ##############################
! 1330: # View Diff
! 1331: ##############################
! 1332: elsif ($fullname =~ s/\.diff$//
! 1333: && -f $fullname . ',v' && $input{r1} && $input{r2})
! 1334: {
! 1335:
! 1336: # $where-diff-removal if 'cvs rdiff' is used
! 1337: # .. but 'cvs rdiff'doesn't support some options
! 1338: # rcsdiff does (-w and -p), so it is disabled
! 1339: # $where =~ s/\.diff$//;
! 1340:
! 1341: # Allow diffs using the ".diff" extension so that browsers that default
! 1342: # to the filename in the URL when saving don't save diffs as eg. foo.c.
! 1343: &doDiff($fullname, $input{r1}, $input{tr1},
! 1344: $input{r2}, $input{tr2}, $input{f});
! 1345: gzipclose();
! 1346: exit;
! 1347:
! 1348: }
! 1349:
! 1350: elsif (do { (my $tmp = $fullname) =~ s|/([^/]+)$|/Attic/$1|; -f "$tmp,v" }) {
! 1351: # The file has been removed and is in the Attic.
! 1352: # Send a redirect pointing to the file in the Attic.
! 1353: (my $newplace = $scriptwhere) =~ s|/([^/]+)$|/Attic/$1|;
! 1354: if ($ENV{QUERY_STRING} ne "") {
! 1355: redirect("$newplace?$ENV{QUERY_STRING}");
! 1356: } else {
! 1357: redirect($newplace);
! 1358: }
! 1359: exit;
1.45.2.75 knu 1360:
1.45.2.91! simon 1361: }
! 1362:
! 1363: elsif (0 && (my @files = &safeglob($fullname . ",v"))) {
! 1364: http_header("text/plain");
! 1365: print "You matched the following files:\n";
! 1366: print join ("\n", @files);
! 1367:
! 1368: # TODO:
! 1369: # Find the tags from each file
! 1370: # Display a form offering diffs between said tags
! 1371: }
! 1372:
! 1373: else {
! 1374: # Assume it's a module name with a potential path following it.
! 1375: my $module;
! 1376: my $xtra = (($module = $where) =~ s|(/.*)||) ? $1 : '';
! 1377:
! 1378: # Is there an indexed version of modules?
! 1379: my $fh = do { local (*FH); };
! 1380: if (open($fh, catfile($cvsroot, 'CVSROOT', 'modules'))) {
! 1381: while (<$fh>) {
! 1382: if (/^(\S+)\s+(\S+)/o
! 1383: && $module eq $1
! 1384: && $module ne $2
! 1385: && -d "$cvsroot/$2")
! 1386: {
! 1387: close($fh);
! 1388: redirect("$scriptname/$2$xtra$query");
! 1389: }
! 1390: }
! 1391: close($fh);
! 1392: }
! 1393: fatal("404 Not Found", '%s: no such file or directory', $where);
1.45.2.75 knu 1394: }
1.45.2.51 knu 1395:
1.45.2.52 knu 1396: gzipclose();
1.45.2.75 knu 1397:
1.45.2.46 knu 1398: ## End MAIN
1399:
1400:
1.45.2.91! simon 1401: sub printDiffSelect($)
! 1402: {
! 1403: my ($use_java_script) = @_;
1.45.2.46 knu 1404:
1.45.2.91! simon 1405: print '<select id="f" name="f"';
! 1406: print ' onchange="this.form.submit()"' if $use_java_script;
! 1407: print ">\n";
1.45.2.46 knu 1408:
1.45.2.91! simon 1409: for my $difftype (@DIFFTYPES) {
! 1410: printf("<option value=\"%s\"%s>%s</option>\n",
! 1411: $difftype, $input{f} eq $difftype ? ' selected="selected"' : '',
! 1412: "\u$DIFFTYPES{$difftype}{descr}");
! 1413: }
! 1414:
! 1415: print "</select>";
! 1416: }
! 1417:
! 1418:
! 1419: sub printDiffSelectStickyVars()
! 1420: {
! 1421: while (my ($key, $val) = each %input) {
! 1422: next if ($key eq 'f');
! 1423: next if (defined($DEFAULTVALUE{$key}) && $DEFAULTVALUE{$key} eq $val);
! 1424: print "<input type=\"hidden\" name=\"", htmlquote($key), "\" value=\"",
! 1425: htmlquote($val), "\" />\n";
! 1426: }
! 1427: }
! 1428:
! 1429:
! 1430: sub printLogSortSelect($)
! 1431: {
! 1432: my ($use_java_script) = @_;
! 1433:
! 1434: print '<select id="logsort" name="logsort"';
! 1435: print ' onchange="this.form.submit()"' if $use_java_script;
! 1436: print ">\n";
! 1437:
! 1438: for my $sortkey (@LOGSORTKEYS) {
! 1439: printf("<option value=\"%s\"%s>%s</option>\n",
! 1440: $sortkey, $logsort eq $sortkey ? ' selected="selected"' : '',
! 1441: "\u$LOGSORTKEYS{$sortkey}{descr}");
! 1442: }
! 1443:
! 1444: print "</select>";
1.12 fenner 1445: }
1446:
1.45.2.91! simon 1447:
! 1448: #
! 1449: # Find the last modified, version controlled files in the given directories.
! 1450: # Compares solely based on modification timestamps. Files in the returned list
! 1451: # are without the ,v suffix, and unreadable files have been filtered out.
! 1452: #
! 1453: sub findLastModifiedSubdirs(@)
! 1454: {
! 1455: my (@dirs) = @_;
! 1456:
! 1457: my @files;
! 1458: foreach my $dirname (@dirs) {
! 1459: next if ($dirname eq curdir() || $dirname eq updir());
! 1460: my $dir = catdir($fullname, $dirname);
! 1461: next if (!-d $dir);
! 1462:
! 1463: my $dh = do { local (*DH); };
! 1464: opendir($dh, $dir) or next;
! 1465: my (@filenames) = grep(!forbidden(catfile($dir, $_)), readdir($dh));
! 1466: closedir($dh);
! 1467:
! 1468: my $lastmod = undef;
! 1469: my $lastmodtime = undef;
! 1470: foreach my $filename (@filenames) {
! 1471: ($filename) =
! 1472: (catfile($dirname, $filename) =~ VALID_PATH) or next; # untaint
! 1473: my ($file) = catfile($fullname, $filename);
! 1474: next if ($filename !~ /,v$/o || !-f $file || !-r _);
! 1475: my $modtime = -M _;
! 1476: if (!defined($lastmod) || $modtime < $lastmodtime) {
! 1477: ($lastmod = $filename) =~ s/,v$//;
! 1478: $lastmodtime = $modtime;
! 1479: }
! 1480: }
! 1481: push(@files, $lastmod) if (defined($lastmod));
! 1482: }
! 1483: return @files;
! 1484: }
! 1485:
! 1486:
! 1487: sub htmlify_sub(&$)
! 1488: {
! 1489: (my $proc, local $_) = @_;
! 1490: my @a = split(m|(<a [^>]+>[^<]*</a>)|i);
! 1491: my $linked;
! 1492: my $result = '';
! 1493:
! 1494: while (($_, $linked) = splice(@a, 0, 2)) {
! 1495: &$proc();
! 1496: $result .= $_ if defined($_);
! 1497: $result .= $linked if defined($linked);
! 1498: }
! 1499:
! 1500: return $result;
! 1501: }
! 1502:
! 1503:
! 1504: sub htmlify($;$)
! 1505: {
! 1506: (local $_, my $extra) = @_;
! 1507:
! 1508: $_ = htmlquote($_);
! 1509:
! 1510: # get URL's as link
! 1511: s{
! 1512: ((https?|ftp)://.+?)([\s\']|&(quot|[lg]t);)
! 1513: }{
! 1514: &link($1, htmlunquote($1)) . $3
! 1515: }egx;
! 1516:
! 1517: if ($allow_mailtos) {
! 1518: # Make mailto: links from email addresses.
! 1519: $_ = htmlify_sub {
! 1520: s<
! 1521: ([\w+=\-.!]+@[\w\-]+(?:\.[\w\-]+)+)
! 1522: ><
! 1523: &link($1, "mailto:$1")
! 1524: >egix;
! 1525: } $_;
! 1526: }
! 1527:
! 1528: if ($extra) {
! 1529:
! 1530: # get PR #'s as link: "PR#nnnn" "PR: nnnn, ..." "PR nnnn, ..." "bin/nnnn"
! 1531: if (defined($prcgi) && defined($re_prkeyword)) {
! 1532: my $prev;
! 1533:
! 1534: do {
! 1535: $prev = $_;
! 1536:
! 1537: $_ = htmlify_sub {
! 1538: s{
! 1539: (\b$re_prkeyword[:\#]?\s*
! 1540: (?:
! 1541: \#?
! 1542: \d+[,\s]\s*
! 1543: )*
! 1544: \#?)
! 1545: (\d+)\b
! 1546: }{
! 1547: $1 . &link($2, sprintf($prcgi, $2))
! 1548: }egix;
! 1549: } $_;
! 1550: } while ($_ ne $prev);
! 1551:
! 1552: if (defined($re_prcategories)) {
! 1553: $_ = htmlify_sub {
! 1554: s{
! 1555: (\b$re_prcategories/(\d+)\b)
! 1556: }{
! 1557: &link($1, sprintf($prcgi, $2))
! 1558: }egox;
! 1559: } $_;
! 1560: }
! 1561: }
! 1562:
! 1563: # get manpage specs as link: "foo.1" "foo(1)"
! 1564: if (defined($mancgi)) {
! 1565: $_ = htmlify_sub {
! 1566: s{
! 1567: (
! 1568: \b ( \w[\w+\-.]* (?: ::\w[\w+\-.]*)* )
! 1569: (?:
! 1570: \( ([0-9n]) \) \B
! 1571: |
! 1572: \. ([0-9n]) \b
! 1573: )
! 1574: )
! 1575: }{
! 1576: my($text, $name, $section) = ($1, $2, defined($3) ? $3 : $4);
! 1577: ($name =~ /[A-Za-z]/ && $name !~ /\.(:|$)/)
! 1578: ? &link($text, sprintf($mancgi, $section, uri_escape($name)))
! 1579: : $text;
! 1580: }egx;
! 1581: } $_;
! 1582: }
! 1583: }
! 1584:
! 1585: return $_;
! 1586: }
! 1587:
! 1588:
! 1589: sub spacedHtmlText($;$)
! 1590: {
! 1591: (local $_, my $ts) = @_;
! 1592: return '' unless defined($_);
! 1593: $ts ||= $tabstop || 8;
! 1594:
! 1595: # Expand tabs
! 1596: 1 while s/(.*?)(\t+)/$1 . ' ' x (length($2) * $ts - length($1) % $ts)/e;
! 1597:
! 1598: if ($hr_breakable) {
! 1599: s/^ /\001nbsp;/; # protect leading and...
! 1600: s/ $/\001nbsp;/; # ...trailing whitespace (mostly for String::Ediff),
! 1601: s/ / \001nbsp;/g; # ...and leave every other space 'breakable'
! 1602: } else {
! 1603: s/ /\001nbsp;/g;
! 1604: }
! 1605:
! 1606: $_ = htmlify($_, $allow_source_extra);
! 1607:
! 1608: # unescape
! 1609: y/\001/&/;
! 1610:
! 1611: return $_;
! 1612: }
! 1613:
! 1614:
1.45.2.87 scop 1615: # Note that this doesn't htmlquote the first argument...
1.45.2.91! simon 1616: sub link($$)
! 1617: {
! 1618: my ($name, $url) = @_;
! 1619: return sprintf('<a href="%s">%s</a>', htmlquote($url), $name);
! 1620: }
! 1621:
! 1622:
! 1623: sub revcmp($$)
! 1624: {
! 1625: my ($rev1, $rev2) = @_;
1.12 fenner 1626:
1.45.2.91! simon 1627: # make no comparison for a tag or a branch
! 1628: return 0 if $rev1 =~ /[^\d.]/ || $rev2 =~ /[^\d.]/;
1.45.2.69 knu 1629:
1.45.2.91! simon 1630: my (@r1) = split(/\./, $rev1);
! 1631: my (@r2) = split(/\./, $rev2);
! 1632: my ($a, $b);
! 1633:
! 1634: while (($a = shift(@r1)) && ($b = shift(@r2))) {
! 1635: return $a <=> $b unless ($a == $b);
! 1636: }
! 1637: if (@r1) { return 1; }
! 1638: if (@r2) { return -1; }
! 1639: return 0;
1.12 fenner 1640: }
1641:
1.45.2.91! simon 1642:
! 1643: #
! 1644: # Signal a fatal error.
! 1645: #
! 1646: sub fatal($$@)
! 1647: {
! 1648: my ($errcode, $format, @args) = @_;
! 1649: print "Status: $errcode\r\n";
! 1650: html_header('Error');
! 1651: print '<div id="error">Error: ',
! 1652: sprintf($format, map(htmlquote($_), @args)), "</div>\n";
! 1653: html_footer();
! 1654: exit(1);
! 1655: }
! 1656:
! 1657:
! 1658: #
! 1659: # Signal a (fatal) configuration error.
! 1660: #
! 1661: sub config_error($$)
! 1662: {
! 1663: fatal('500 Internal Error',
! 1664: 'Error loading configuration file "<code>%s</code>":<br /><br />' .
! 1665: '%s<br />', @_);
! 1666: }
! 1667:
! 1668:
! 1669: #
! 1670: # Sends a redirect to the given URL.
! 1671: #
! 1672: sub redirect($;$)
! 1673: {
! 1674: my ($url, $permanent) = @_;
! 1675: my ($status, $text);
! 1676: if ($permanent) {
! 1677: $status = '301';
! 1678: $text = 'Moved Permanently';
! 1679: } else {
! 1680: $status = '302';
! 1681: $text = 'Found';
! 1682: }
! 1683: print "Status: $status $text\r\n", "Location: $url\r\n";
! 1684: html_header($text);
! 1685: print "<p>This document has moved ", &link('here', $url), ".</p>\n";
! 1686: html_footer();
! 1687: exit(1);
! 1688: }
! 1689:
! 1690:
! 1691: sub safeglob($)
! 1692: {
! 1693: my ($filename) = @_;
! 1694:
! 1695: (my $dirname = $filename) =~ s|/[^/]+$||;
! 1696: $filename =~ s|.*/||;
! 1697:
! 1698: my @results;
! 1699: my $dh = do { local (*DH); };
! 1700: if (opendir($dh, $dirname)) {
! 1701: my $glob = $filename;
! 1702: my $t;
! 1703:
! 1704: # transform filename from glob to regex. Deal with:
! 1705: # [, {, ?, * as glob chars
! 1706: # make sure to escape all other regex chars
! 1707: $glob =~ s/([\.\(\)\|\+])/\\$1/g;
! 1708: $glob =~ s/\*/.*/g;
! 1709: $glob =~ s/\?/./g;
! 1710: $glob =~ s/{([^}]+)}/($t = $1) =~ s-,-|-g; "($t)"/eg;
! 1711: $glob = qr/^$glob$/;
! 1712:
! 1713: foreach (readdir($dh)) {
! 1714: if ($_ =~ $glob && $_ =~ VALID_PATH) {
! 1715: push(@results, catfile($dirname, $1)); # untaint
! 1716: }
! 1717: }
! 1718: closedir($dh);
! 1719: }
! 1720:
! 1721: return @results;
! 1722: }
! 1723:
! 1724:
! 1725: #
! 1726: # Searches @command_path for the given executable file.
! 1727: #
! 1728: sub search_path($)
! 1729: {
! 1730: my ($command) = @_;
! 1731: for my $d (@command_path) {
! 1732: my $cmd = catfile($d, $command);
! 1733: return $cmd if (-x $cmd && !-d _);
! 1734: }
! 1735: return '';
1.45.2.46 knu 1736: }
1.12 fenner 1737:
1.45.2.91! simon 1738:
! 1739: #
! 1740: # Gets the enscript(1) highlight mode corresponding to the given filename,
! 1741: # or undef if unsupported.
! 1742: #
! 1743: sub getEnscriptHL($)
! 1744: {
! 1745: return undef unless $allow_enscript;
! 1746: my ($filename) = @_;
! 1747: while (my ($hl, $regex) = each %enscript_types) {
! 1748: return $hl if ($filename =~ $regex);
! 1749: }
! 1750: return undef;
! 1751: }
! 1752:
! 1753:
! 1754: #
! 1755: # Gets the MIME type for the given file name.
! 1756: #
! 1757: sub getMimeType($;$)
! 1758: {
! 1759: my ($fullname, $binary) = @_;
! 1760: $binary = ($keywordsubstitution && $keywordsubstitution =~ /b/)
! 1761: unless defined($binary);
! 1762:
! 1763: (my $suffix = $fullname) =~ s/^.*\.([^.]*)$/$1/;
! 1764:
! 1765: my $mimetype = $MTYPES{$suffix};
! 1766: $mimetype ||= $MimeTypes->mimeTypeOf($fullname) if defined($MimeTypes);
! 1767:
! 1768: if (!$mimetype && $suffix ne '*' && -f $mime_types && -r _) {
! 1769: my $fh = do { local (*FH); };
! 1770: if (open($fh, $mime_types)) {
! 1771: my $re = sprintf('^\s*(\S+\/\S+)\s.+\b%s\b', quotemeta($suffix));
! 1772: $re = qr/$re/;
! 1773: while (my $line = <$fh>) {
! 1774: if ($line =~ $re) {
! 1775: $mimetype = $1;
! 1776: $MTYPES{$suffix} = $mimetype;
! 1777: last;
! 1778: }
! 1779: }
! 1780: close($fh);
! 1781: } else {
! 1782: warn("Can't open MIME types file $mime_types for reading: $!");
! 1783: }
! 1784: }
! 1785:
! 1786: $mimetype ||= $MTYPES{'*'};
! 1787: $mimetype ||= $binary ? 'application/octet-stream' : 'text/plain';
! 1788: return $mimetype;
! 1789: }
! 1790:
! 1791:
1.45.2.46 knu 1792: ###############################
1.45.2.51 knu 1793: # read first lines like head(1)
1794: ###############################
1.45.2.91! simon 1795: sub head($;$)
! 1796: {
! 1797: my ($fh, $linecount) = @_;
! 1798: $linecount ||= 10;
1.45.2.51 knu 1799:
1.45.2.91! simon 1800: my @buf;
! 1801: if ($linecount > 0) {
! 1802: for (my $i = 0; !eof($fh) && $i < $linecount; $i++) {
! 1803: push @buf, scalar <$fh>;
! 1804: }
! 1805: } else {
! 1806: @buf = <$fh>;
! 1807: }
! 1808: return @buf;
1.45.2.51 knu 1809: }
1810:
1.45.2.91! simon 1811:
1.45.2.51 knu 1812: ###############################
1813: # scan vim and Emacs directives
1814: ###############################
1.45.2.91! simon 1815: sub scan_directives(@)
! 1816: {
! 1817: my $ts = undef;
1.45.2.51 knu 1818:
1.45.2.91! simon 1819: for (@_) {
! 1820: $ts = $1 if /\b(?:ts|tabstop|tab-width)[:=]\s*([1-9]\d*)\b/;
! 1821: }
1.45.2.51 knu 1822:
1.45.2.91! simon 1823: ('tabstop' => $ts);
1.45.2.51 knu 1824: }
1825:
1.45.2.78 knu 1826:
1.45.2.91! simon 1827: sub openOutputFilter()
! 1828: {
! 1829: return unless $output_filter;
! 1830:
! 1831: open(STDOUT, "|-") and return;
1.45.2.78 knu 1832:
1.45.2.91! simon 1833: # child of child
! 1834: open(STDERR, '>', devnull()) unless $DEBUG;
! 1835: exec($output_filter) or exit -1;
1.45.2.78 knu 1836: }
1837:
1.45.2.91! simon 1838:
1.45.2.51 knu 1839: ###############################
1.45.2.46 knu 1840: # show Annotation
1841: ###############################
1.45.2.91! simon 1842: sub doAnnotate($$)
! 1843: {
! 1844: my ($rev, $tag) = @_;
! 1845: $rev = $tag || 'HEAD' if ($rev eq '.');
! 1846: (my $pathname = $where) =~ s|((?<=/)Attic/)?[^/]*$||;
! 1847: (my $filename = $where) =~ s|^.*/||;
! 1848:
! 1849: # This annotate version is based on the cvs annotate-demo Perl script by
! 1850: # Cyclic Software. It was written by Cyclic Software,
! 1851: # http://www.cyclic.com/, and is in the public domain.
! 1852: # We could abandon the use of rlog, rcsdiff and co using
! 1853: # the cvs server in a similiar way one day (..after rewrite).
! 1854:
! 1855: local (*CVS_IN, *CVS_OUT);
! 1856: my $annotate_err;
! 1857: my ($h, $err) =
! 1858: startproc([ $CMD{cvs}, @annotate_options, 'server' ],
! 1859: '<pipe', \*CVS_IN, '>pipe', \*CVS_OUT,
! 1860: '2>', \$annotate_err);
! 1861: fatal('500 Internal Error',
! 1862: 'Annotate failure (exit status %s), output: <pre>%s</pre>',
! 1863: $? >> 8 || -1, $err)
! 1864: unless $h;
! 1865:
! 1866: # OK, first send the request to the server. A simplified example is:
! 1867: # Root /home/kingdon/zwork/cvsroot
! 1868: # Argument foo/xx
! 1869: # Directory foo
! 1870: # /home/kingdon/zwork/cvsroot/foo
! 1871: # Directory .
! 1872: # /home/kingdon/zwork/cvsroot
! 1873: # annotate
! 1874: # although as you can see there are a few more details.
! 1875:
! 1876: print CVS_IN "Root $cvsroot\n";
! 1877: print CVS_IN
! 1878: "Valid-responses ok error Valid-requests Checked-in Updated Merged Removed M E\n";
! 1879:
! 1880: # Don't worry about sending valid-requests, the server just needs to
! 1881: # support "annotate" and if it doesn't, there isn't anything to be done.
! 1882: print CVS_IN "UseUnchanged\n";
! 1883: print CVS_IN "Argument -r\n";
! 1884: print CVS_IN "Argument $rev\n";
! 1885: print CVS_IN "Argument $where\n";
! 1886:
! 1887: # The protocol requires us to fully fake a working directory (at
! 1888: # least to the point of including the directories down to the one
! 1889: # containing the file in question).
! 1890: # So if $where is "dir/sdir/file", then dirs will be ("dir","sdir","file")
! 1891: my $path = '';
! 1892: foreach my $dir (split('/', $where)) {
! 1893:
! 1894: if ($path eq "") {
! 1895: # In our example, $dir is "dir".
! 1896: $path = $dir;
! 1897: } else {
! 1898: print CVS_IN "Directory $path\n";
! 1899: print CVS_IN "$cvsroot/$path\n";
! 1900:
! 1901: # In our example, $_ is "sdir" and $path becomes "dir/sdir"
! 1902: # And the next time, "file" and "dir/sdir/file" (which then gets
! 1903: # ignored, because we don't need to send Directory for the file).
! 1904: $path .= "/$dir";
! 1905: }
! 1906: }
! 1907: undef $path;
! 1908:
! 1909: # And the last "Directory" before "annotate" is the top level.
! 1910: print CVS_IN "Directory .\n";
! 1911: print CVS_IN "$cvsroot\n";
! 1912:
! 1913: print CVS_IN "annotate\n";
! 1914:
! 1915: # OK, we've sent our command to the server. Thing to do is to
! 1916: # close the writer side and get all the responses.
! 1917: if (!close(CVS_IN)) {
! 1918: $h->finish();
! 1919: fatal('500 Internal Error',
! 1920: 'Annotate failure (exit status %s): <code>%s</code>, output: ' .
! 1921: '<pre>%s</pre>', $? >> 8, $!, $annotate_err);
! 1922: }
! 1923:
! 1924: navigateHeader($scriptwhere, $pathname, $filename, $rev, 'annotate');
! 1925:
! 1926: my $revtype = ($rev =~ /\./) ? 'revision' : 'tag'; # TODO: tag -> branch/tag?
! 1927: print '<h3 style="text-align: center">Annotation of ',
! 1928: htmlquote("$pathname$filename"), ", $revtype $rev</h3>\n";
! 1929:
! 1930: # Ready to get the responses from the server.
! 1931: # For example:
! 1932: # E Annotations for foo/xx
! 1933: # E ***************
! 1934: # M 1.3 (kingdon 06-Sep-97): hello
! 1935: # ok
! 1936: my ($lineNr) = 0;
! 1937: my ($oldLrev, $oldLusr) = ("", "");
! 1938: my ($revprint, $usrprint);
! 1939:
! 1940: if ($annTable) {
! 1941: print <<EOF;
! 1942: <table style="border: none" cellspacing="0" cellpadding="0" summary="Annotation">
! 1943: EOF
! 1944: } else {
! 1945: print "<pre>";
! 1946: }
! 1947:
! 1948: # prefetch several lines
! 1949: my @buf = head(*CVS_OUT);
! 1950:
! 1951: my %d = scan_directives(@buf);
! 1952:
! 1953: while (@buf || !eof(*CVS_OUT)) {
! 1954:
! 1955: $_ = @buf ? shift @buf : <CVS_OUT>;
! 1956: my @words = split;
! 1957:
! 1958: # Adding one is for the (single) space which follows $words[0].
! 1959: my $rest = substr($_, length($words[0]) + 1);
! 1960: if ($words[0] eq "E") {
! 1961: next;
! 1962: } elsif ($words[0] eq "M") {
! 1963: $lineNr++;
! 1964: (my $lrev = substr($_, 2, 13)) =~ y/ //d;
! 1965: (my $lusr = substr($_, 16, 9)) =~ y/ //d;
! 1966: my $line = substr($_, 36);
! 1967: # TODO: this does not work for branch/tag revisions.
! 1968: my $isCurrentRev = ($rev eq $lrev);
! 1969:
! 1970: # we should parse the date here ..
! 1971: if ($lrev eq $oldLrev) {
! 1972: $revprint = sprintf('%-8s', '');
! 1973: } else {
! 1974: $revprint = sprintf('%-8s', $lrev);
! 1975: $revprint =~ s|(\S+)|&link($1, uri_escape($filename)."$query#rev$1")|e;
! 1976: $oldLusr = '';
! 1977: }
! 1978:
! 1979: $usrprint = ($lusr eq $oldLusr) ? '' : $lusr;
! 1980: $oldLrev = $lrev;
! 1981: $oldLusr = $lusr;
! 1982:
! 1983: print $is_textbased ? '<b>' : '<span class="current-rev">'
! 1984: if $isCurrentRev;
! 1985:
! 1986: $usrprint = sprintf('%-8s', $usrprint);
! 1987: printf '%s%s %s %4d:', $revprint, $isCurrentRev ? '!' : ' ',
! 1988: htmlquote($usrprint), $lineNr;
! 1989: print spacedHtmlText($line, $d{tabstop});
! 1990:
! 1991: print $is_textbased ? '</b>' : '</span>' if $isCurrentRev;
! 1992:
! 1993: } elsif ($words[0] eq "ok") {
! 1994: # We could complain about any text received after this, like the
! 1995: # CVS command line client. But for simplicity, we don't.
! 1996:
! 1997: } elsif ($words[0] eq "error") {
! 1998: fatal("500 Internal Error",
! 1999: 'Error occured during annotate: <b>%s</b>', $_);
! 2000: }
! 2001: }
! 2002: $h->finish();
! 2003:
! 2004: if ($annTable) {
! 2005: print "</table>";
! 2006: } else {
! 2007: print "</pre>";
! 2008: }
! 2009: html_footer();
1.45.2.46 knu 2010: }
2011:
2012: ###############################
2013: # make Checkout
2014: ###############################
1.45.2.91! simon 2015: sub doCheckout($$$)
! 2016: {
! 2017: my ($fullname, $rev, $tag) = @_;
! 2018: $rev = $tag || undef if (!$rev || $rev eq '.');
! 2019:
! 2020: # Start resolving whether we will do a markup view or not.
! 2021: my $do_markup = undef;
! 2022: my $want_type = $input{'content-type'};
! 2023:
! 2024: # No markup if markup disallowed.
! 2025: $do_markup = 0 unless $allow_markup;
! 2026:
! 2027: # No markup if checkout magic cookie in URL.
! 2028: $do_markup = 0 if (!defined($do_markup) && $doCheckout);
! 2029:
! 2030: # Do markup if explicitly asked using cvsweb-markup content type. If the
! 2031: # asked content type is anything else, no markup.
! 2032: if (!defined($do_markup) && $want_type) {
! 2033: if ($want_type =~ CVSWEBMARKUP) {
! 2034: $want_type = undef;
! 2035: $do_markup = 1;
! 2036: } else {
! 2037: $do_markup = 0;
! 2038: }
! 2039: }
! 2040:
! 2041: # Ok, if $do_markup is still undefined, we know that a download has not been
! 2042: # explicitly asked. For the last check further down below we'll need to
! 2043: # know if the file is binary, and possibly run a log on it.
! 2044: my $needlog = $do_markup || $use_moddate;
! 2045:
! 2046: my $moddate = undef;
! 2047: my $revopt;
! 2048: if (defined($rev)) {
! 2049: $revopt = "-r$rev";
! 2050: if ($needlog) {
! 2051: readLog($fullname, $rev);
! 2052: $moddate = $date{$rev};
! 2053: # TODO: even this does not work for branch tags, but only normal tags :(
! 2054: $moddate ||= $date{$symrev{$rev}} if defined($symrev{$rev});
! 2055: }
! 2056: } else {
! 2057: $revopt = "-rHEAD";
! 2058: if ($needlog) {
! 2059: readLog($fullname);
! 2060: $moddate = $date{$symrev{HEAD}};
! 2061: }
! 2062: }
! 2063:
! 2064: my $cr = abs_path($cvsroot) || $cvsroot;
! 2065: # abs_path() taints when run as a CGI...
! 2066: if ($cr =~ VALID_PATH) {
! 2067: $cr = $1;
! 2068: } else {
! 2069: fatal('500 Internal Error', 'Illegal CVS root: <code>%s</code>', $cr);
! 2070: }
! 2071: # Use abs_path() to work around a bug of cvs -p; expand symlinks if we can.
! 2072: my @cmd = ($CMD{cvs}, @cvs_options, '-d', $cr, 'co', '-p', $revopt, $where);
! 2073:
! 2074: local (*CVS_OUT, *CVS_ERR);
! 2075: my ($h, $err) =
! 2076: startproc(\@cmd, \"", '>pipe', \*CVS_OUT, '2>pipe', \*CVS_ERR);
! 2077: fatal('500 Internal Error',
! 2078: 'Checkout failure (exit status %s), output: <pre>%s</pre>',
! 2079: $? >> 8 || -1, $err)
! 2080: unless $h;
! 2081:
! 2082: if (eof(CVS_ERR)) {
! 2083: $h->finish();
! 2084: fatal("404 Not Found", '%s is not (any longer) pertinent', $where);
! 2085: }
! 2086:
! 2087: #===================================================================
! 2088: #Checking out squid/src/ftp.c
! 2089: #RCS: /usr/src/CVS/squid/src/ftp.c,v
! 2090: #VERS: 1.1.1.28.6.2
! 2091: #***************
! 2092:
! 2093: # Parse CVS header
! 2094: my ($revision, $filename, $cvsheader);
! 2095: $filename = "";
! 2096: while (<CVS_ERR>) {
! 2097: last if (/^\*\*\*\*/);
! 2098: $revision = $1 if (/^VERS: (.*)$/);
! 2099:
! 2100: if (/^Checking out (.*)$/) {
! 2101: ($filename = $1) =~ s|^\./+||;
! 2102: }
! 2103: $cvsheader .= $_;
! 2104: }
! 2105: close(CVS_ERR);
! 2106:
! 2107: if ($filename ne $where) {
! 2108: $h->finish();
! 2109: fatal("500 Internal Error",
! 2110: 'Unexpected output from cvs co: <pre>%s</pre> ' .
! 2111: '(expected "<code>%s</code>" but got "<code>%s</code>")',
! 2112: $cvsheader, $where, $filename);
! 2113: }
! 2114:
! 2115: # Last checks whether we'll do markup or not.
! 2116: my $isbin = $keywordsubstitution && $keywordsubstitution =~ /b/;
! 2117: my $mimetype = getMimeType($fullname, $isbin);
! 2118:
! 2119: # If we still are not sure whether to do markup or not:
! 2120: # if the MIME type is "viewable" or this is not a binary file, do.
! 2121: $do_markup = !$isbin || viewable($mimetype) unless defined($do_markup);
! 2122:
! 2123: if ($do_markup) {
! 2124:
! 2125: # If this is something we'll be linking to in the markup view, we are
! 2126: # done with this particular output from "cvs co" and must discard it.
! 2127: my $linked = $mimetype =~ m{^image/|application/pdf$}i;
! 2128: if ($linked) {
! 2129: close(CVS_OUT);
! 2130: $h->finish();
! 2131: }
! 2132:
! 2133: # Here we know the last modified date, but don't know if tags have been
! 2134: # added afterwards (those are shown in the markup view): no last-modified.
! 2135: cvswebMarkup(\*CVS_OUT, $fullname, $revision, $isbin, $mimetype, $needlog);
! 2136:
! 2137: $h->finish() unless $linked;
! 2138:
! 2139: } else {
! 2140: http_header($want_type || $mimetype, $moddate);
! 2141: local $/ = undef;
! 2142: print <CVS_OUT>;
! 2143: $h->finish();
! 2144: }
! 2145: }
! 2146:
! 2147:
! 2148: sub cvswebMarkup($$$$$$;$)
! 2149: {
! 2150: my ($filehandle, $fullname, $rev, $isbin, $mimetype, $logged, $mod) = @_;
! 2151:
! 2152: (my $pathname = $where) =~ s|((?<=/)Attic/)?[^/]*$||;
! 2153: (my $filename = $where) =~ s|^.*/||;
! 2154:
! 2155: navigateHeader($scriptwhere, $pathname, $filename, $rev, 'view', $mod);
! 2156:
! 2157: print <<EOF;
! 2158: <hr />
! 2159: <div class="log-markup">
! 2160: File:
! 2161: EOF
! 2162: print &clickablePath($where, 1), "<br />\n";
! 2163:
! 2164: if ($show_log_in_markup) {
! 2165: readLog($fullname) unless $logged; #,$rev);
! 2166: printLog($rev, $mimetype, $isbin);
! 2167: } else {
! 2168: print "Revision: <b>$rev</b><br />\n";
! 2169: print 'Tag: ', htmlquote($input{only_with_tag}), "<br />\n"
! 2170: if $input{only_with_tag};
! 2171: }
! 2172: print "</div>\n<hr />";
! 2173: my $url = download_url(uri_escape($filename), $rev, $mimetype);
! 2174:
! 2175: if ($mimetype =~ m|^image/|i) {
! 2176: printf '<img src="%s" alt="%s" /><br />',
! 2177: $url . $barequery, htmlquote($filename);
! 2178: } elsif (lc($mimetype) eq 'application/pdf') {
! 2179: printf '<embed src="%s" width="100%%" height="100%%" /><br />',
! 2180: $url . $barequery;
! 2181: } else {
! 2182:
! 2183: print "<pre>\n";
! 2184: my $linenumbers = $input{ln} || 0;
! 2185:
! 2186: if (my $enscript_hl = getEnscriptHL($filename)) {
! 2187: doEnscript($filehandle, $enscript_hl, $linenumbers);
! 2188:
! 2189: } else {
! 2190: my $ln = 0;
! 2191: my @buf = ();
! 2192: my $ts = undef;
! 2193:
! 2194: if ($preformat_in_markup) {
! 2195: # prefetch several lines
! 2196: @buf = head($filehandle);
! 2197: my %d = scan_directives(@buf);
! 2198: $ts = $d{tabstop};
! 2199: }
! 2200:
! 2201: while (@buf || !eof($filehandle)) {
! 2202: $_ = @buf ? shift @buf : <$filehandle>;
! 2203: if ($linenumbers) {
! 2204: $ln++;
! 2205: printf '<a id="l%d" class="src">%5d: </a>', ($ln) x 2;
! 2206: }
! 2207: print $preformat_in_markup ? spacedHtmlText($_, $ts) : htmlquote($_);
! 2208: }
! 2209: }
! 2210:
! 2211: print "</pre>\n";
! 2212: }
! 2213: html_footer();
1.12 fenner 2214: }
2215:
1.45.2.46 knu 2216:
1.45.2.91! simon 2217: sub viewable($)
! 2218: {
! 2219: return shift =~ m{^((text|image)/|application/pdf)}i;
1.45.2.46 knu 2220: }
2221:
1.45.2.91! simon 2222:
1.45.2.46 knu 2223: ###############################
2224: # Show Colored Diff
2225: ###############################
1.45.2.91! simon 2226: sub doDiff($$$$$$)
! 2227: {
! 2228: my ($fullname, $r1, $tr1, $r2, $tr2, $f) = @_;
! 2229:
! 2230: if (forbidden($fullname)) {
! 2231: fatal('403 Forbidden', 'Access to %s forbidden.', $where);
! 2232: }
! 2233:
! 2234: my ($rev1, $sym1);
! 2235: if ($r1 =~ /([^:]+)(:(.+))?/) {
! 2236: $rev1 = $1;
! 2237: $sym1 = $3;
! 2238: }
! 2239: if ($r1 eq 'text') {
! 2240: $rev1 = $tr1;
! 2241: $sym1 = "";
! 2242: }
! 2243:
! 2244: my ($rev2, $sym2);
! 2245: if ($r2 =~ /([^:]+)(:(.+))?/) {
! 2246: $rev2 = $1;
! 2247: $sym2 = $3;
! 2248: }
! 2249: if ($r2 eq 'text') {
! 2250: $rev2 = $tr2;
! 2251: $sym2 = "";
! 2252: }
! 2253:
! 2254: #
! 2255: # rev1 and rev2 are now both numeric revisions.
! 2256: # Thus we do a DWIM here and swap them if rev1 is after rev2.
! 2257: # XXX should we warn about the fact that we do this?
! 2258: if (&revcmp($rev1, $rev2) > 0) {
! 2259: my ($tmp1, $tmp2) = ($rev1, $sym1);
! 2260: ($rev1, $sym1) = ($rev2, $sym2);
! 2261: ($rev2, $sym2) = ($tmp1, $tmp2);
! 2262: }
! 2263:
! 2264: my $mimetype = getMimeType($fullname);
! 2265:
! 2266: #
! 2267: # Check for per-MIME type diff commands.
! 2268: #
! 2269: my $diffcmd = undef;
! 2270: if (my $diffcmds = $DIFF_COMMANDS{lc($mimetype)}) {
! 2271: if ($f =~ /^ext(\d*)$/) {
! 2272: my $n = $1 || 0;
! 2273: $diffcmd = $diffcmds->[$n];
! 2274: }
! 2275: }
! 2276: if ($diffcmd && $diffcmd->{cmd} && $diffcmd->{name}) {
! 2277:
! 2278: if ($diffcmd->{args} && ref($diffcmd->{args}) ne 'ARRAY') {
! 2279: fatal('500 Internal Error',
! 2280: 'Configuration error: arguments to external diff tools must ' .
! 2281: 'be given as array refs. See "<code>%s</code>" in ' .
! 2282: '<code>%%DIFF_COMMANDS</code>.',
! 2283: $diffcmd->{name});
! 2284: }
! 2285:
! 2286: (my $cvsname = $where) =~ s/\.diff$//;
! 2287:
! 2288: # Create two temporary files with the two revisions
! 2289: my $temp_fn1 = checkout_to_temp($cvsroot, $cvsname, $rev1);
! 2290: my $temp_fn2 = checkout_to_temp($cvsroot, $cvsname, $rev2);
! 2291:
! 2292: # Execute chosen diff binary.
! 2293: local (*DIFF_OUT);
! 2294: my @cmd = ($diffcmd->{cmd});
! 2295: push(@cmd, @{$diffcmd->{args}}) if $diffcmd->{args};
! 2296: push(@cmd, $temp_fn1, $temp_fn2);
! 2297: my ($h, $err) = startproc(\@cmd, \"", '>pipe', \*DIFF_OUT);
! 2298: if (!$h) {
! 2299: unlink($temp_fn1);
! 2300: unlink($temp_fn2);
! 2301: fatal('500 Internal Error',
! 2302: 'Diff failure (exit status %s), output: <pre>%s</pre>',
! 2303: $? >> 8 || -1, $err);
! 2304: }
! 2305:
! 2306: http_header($diffcmd->{type} || 'text/plain');
! 2307: local $/ = undef;
! 2308: print <DIFF_OUT>;
! 2309: $h->finish();
! 2310: unlink($temp_fn1);
! 2311: unlink($temp_fn2);
! 2312:
! 2313: exit;
! 2314: }
! 2315:
! 2316: #
! 2317: # Normal CVS diff.
! 2318: #
! 2319:
! 2320: $f = $DEFAULTVALUE{f} || 'u' if ($f =~ /^ext\d*$/);
! 2321: my $difftype = $DIFFTYPES{$f};
! 2322: if (!$difftype) {
! 2323: fatal("400 Bad arguments", 'Diff format %s not understood', $f);
! 2324: }
! 2325:
! 2326: my @difftype = @{$difftype->{opts}};
! 2327: my $human_readable = $difftype->{colored};
! 2328:
! 2329: # Apply special diff options. -p and -F are not available with side by side
! 2330: # diffs and may cause problems with older (< 2.8) versions of diffutils if
! 2331: # used with --side-by-side.
! 2332: if ($showfunc && $f !~ /^s/) {
! 2333: push(@difftype, '-p');
! 2334: while (my ($re1, $re2) = each %funcline_regexp) {
! 2335: if ($fullname =~ $re1) {
! 2336: push(@difftype, '-F', $re2);
! 2337: last;
! 2338: }
! 2339: }
! 2340: }
! 2341:
! 2342: if ($human_readable) {
! 2343: push(@difftype, '-w') if $hr_ignwhite;
! 2344: push(@difftype, '-kk') if $hr_ignkeysubst;
! 2345: }
! 2346:
! 2347: my $fh = do { local (*FH); };
! 2348: if (!open($fh, "-|")) { # child
! 2349: open(STDERR, ">&STDOUT"); # Redirect stderr to stdout
! 2350: openOutputFilter();
! 2351: exec($CMD{rcsdiff}, @rcsdiff_options, @difftype, "-r$rev1", "-r$rev2",
! 2352: $fullname) or exit -1;
! 2353: }
! 2354:
! 2355: if ($human_readable) {
! 2356: #
! 2357: # Human readable diff.
! 2358: #
! 2359: human_readable_diff($fh, $rev2);
! 2360: html_footer();
! 2361: gzipclose();
! 2362: exit;
! 2363:
! 2364: } elsif ($f =~ /^([ucs])c$/) {
! 2365: #
! 2366: # Enscript colored diff.
! 2367: #
! 2368: my $hl = 'diff';
! 2369: $hl .= $1 if ($1 eq 'u' || $1 eq 's');
! 2370: (my $where_nd = $where) =~ s/\.diff$//;
! 2371: (my $pathname = $where_nd) =~ s|((?<=/)Attic/)?[^/]*$||;
! 2372: (my $filename = $where_nd) =~ s|^.*/||;
! 2373: (my $swhere = $scriptwhere) =~ s|\.diff$||;
! 2374: navigateHeader($swhere, $pathname, $filename, $rev2, 'diff');
! 2375: printf(<<EOF, $where_nd, $rev1, $rev2);
! 2376: <h3 style="text-align: center">Diff for /%s between versions %s and %s</h3>
! 2377: <pre>
! 2378: EOF
! 2379: doEnscript(\$fh, $hl, 0, 'cvsweb_diff');
! 2380: print <<EOF;
! 2381: </pre>
! 2382: <hr style="width: 100%" />
! 2383: <form method="get" action="$scriptwhere">
! 2384: EOF
! 2385: printDiffSelectStickyVars();
! 2386: print 'Diff format: ';
! 2387: printDiffSelect($use_java_script);
! 2388: print "<input type=\"submit\" value=\"Show\" />\n</form>\n";
! 2389: html_footer();
! 2390: gzipclose();
! 2391: exit;
! 2392:
! 2393: } else {
! 2394: #
! 2395: # Plain diff.
! 2396: #
! 2397: http_header("text/plain");
! 2398: }
! 2399:
! 2400: #
! 2401: #===================================================================
! 2402: #RCS file: /home/ncvs/src/sys/netinet/tcp_output.c,v
! 2403: #retrieving revision 1.16
! 2404: #retrieving revision 1.17
! 2405: #diff -c -r1.16 -r1.17
! 2406: #*** /home/ncvs/src/sys/netinet/tcp_output.c 1995/11/03 22:08:08 1.16
! 2407: #--- /home/ncvs/src/sys/netinet/tcp_output.c 1995/12/05 17:46:35 1.17
! 2408: #
! 2409: # Ideas:
! 2410: # - nuke the stderr output if it's what we expect it to be
! 2411: # - Add "no differences found" if the diff command supplied no output.
! 2412: #
! 2413: #*** src/sys/netinet/tcp_output.c 1995/11/03 22:08:08 1.16
! 2414: #--- src/sys/netinet/tcp_output.c 1995/12/05 17:46:35 1.17 RELENG_2_1_0
! 2415: # (bogus example, but...)
! 2416: #
! 2417: my ($f1, $f2);
! 2418: if (grep { $_ eq '-u' } @difftype) {
! 2419: $f1 = '---';
! 2420: $f2 = '\+\+\+';
! 2421: } else {
! 2422: $f1 = '\*\*\*';
! 2423: $f2 = '---';
! 2424: }
! 2425:
! 2426: while (<$fh>) {
! 2427: if (m|^$f1 $cvsroot|o) {
! 2428: s|$cvsroot/||o;
! 2429: if ($sym1) {
! 2430: chop;
! 2431: $_ .= " $sym1\n";
! 2432: }
! 2433: } elsif (m|^$f2 $cvsroot|o) {
! 2434: s|$cvsroot/||o;
! 2435:
! 2436: if ($sym2) {
! 2437: chop;
! 2438: $_ .= " $sym2\n";
! 2439: }
! 2440: }
! 2441: print $_;
! 2442: }
! 2443: close($fh);
1.12 fenner 2444: }
2445:
1.45.2.91! simon 2446:
1.45.2.46 knu 2447: ###############################
2448: # Show Logs ..
2449: ###############################
1.45.2.91! simon 2450: sub getDirLogs($$@)
! 2451: {
! 2452: my ($cvsroot, $dirname, @otherFiles) = @_;
! 2453: my $tag = $input{only_with_tag};
! 2454: my $DirName = catdir($cvsroot, $where);
! 2455:
! 2456: my @files = &safeglob("$DirName/*,v");
! 2457: push (@files, &safeglob("$DirName/Attic/*,v")) unless $input{hideattic};
! 2458: foreach my $file (@otherFiles) {
! 2459: push(@files, catfile($DirName, $file));
! 2460: }
! 2461:
! 2462: # Weed out unreadable files.
! 2463: my $i = 0;
! 2464: my @unreadable = ();
! 2465: while ($i < scalar(@files)) {
! 2466: # Note: last modified files from subdirs returned by
! 2467: # findLastModifiedSubdirs() come without the ,v suffix so they're not
! 2468: # found here, but have already been checked for readability. *cough*
! 2469: if (-r $files[$i] || !-e _) {
! 2470: $i++;
! 2471: } else {
! 2472: push(@unreadable, splice(@files, $i, 1));
! 2473: }
! 2474: }
! 2475:
! 2476: # If there are no files, we're done.
! 2477: return @unreadable unless @files;
! 2478:
! 2479: my @cmd = ($CMD{rlog});
! 2480: # Can't use -r<tag> as '-' is allowed in tagnames,
! 2481: # but misinterpreted by rlog.
! 2482: push(@cmd, '-r') unless defined($tag);
! 2483:
! 2484: my $fh = do { local (*FH); };
! 2485: if (!open($fh, '-|')) { # Child
! 2486: open(STDERR, '>', devnull()) unless $DEBUG; # Ignore rlog's complaints.
! 2487: openOutputFilter();
! 2488: if ($file_list_len && $file_list_len > 1) {
! 2489: while (scalar(@files) > $file_list_len) { # Process files in chunks.
! 2490: system(@cmd, splice(@files, 0, $file_list_len)) == 0 or exit -1;
! 2491: }
! 2492: }
! 2493: exec(@cmd, @files) or exit -1;
! 2494: }
! 2495: undef @cmd;
! 2496:
! 2497: my $state = 'start';
! 2498: my ($date, $branchpoint, $branch, $log, @filetags);
! 2499: my ($rev, $revision, $revwanted, $filename, $head, $author, $keywordsubst);
! 2500:
! 2501: while (<$fh>) {
! 2502: if ($state eq "start") {
! 2503:
! 2504: #Next file. Initialize file variables
! 2505: $rev = '';
! 2506: $revwanted = '';
! 2507: $branch = '';
! 2508: $branchpoint = '';
! 2509: $filename = '';
! 2510: $log = '';
! 2511: $revision = '';
! 2512: %symrev = ();
! 2513: @filetags = ();
! 2514: $keywordsubst= '';
! 2515:
! 2516: #jump to head state
! 2517: $state = "head";
! 2518: }
! 2519:
! 2520: again:
! 2521:
! 2522: if ($state eq "head") {
! 2523:
! 2524: #$rcsfile = $1 if (/^RCS file: (.+)$/); #not used (yet)
! 2525:
! 2526: if (/^Working file: (.+)$/) {
! 2527: $filename = $1;
! 2528: } elsif (/^head: (.+)$/) {
! 2529: $head = $1;
! 2530: } elsif (/^branch: (.+)$/) {
! 2531: $branch = $1;
! 2532: } elsif (/^keyword substitution: (.+)$/) {
! 2533: $keywordsubst = $1;
! 2534: } elsif (/^symbolic names:/) {
! 2535: $state = "tags";
! 2536: ($branch = $head) =~ s/\.\d+$//
! 2537: if $branch eq '';
! 2538: $branch =~ s/(\d+)$/0.$1/;
! 2539: $symrev{MAIN} = $branch;
! 2540: $symrev{HEAD} = $branch;
! 2541: $alltags{MAIN} = 1;
! 2542: $alltags{HEAD} = 1;
! 2543: push (@filetags, "MAIN", "HEAD");
! 2544: } elsif ($_ =~ LOG_REVSEPR) {
! 2545: $state = "log";
! 2546: $rev = '';
! 2547: $date = '';
! 2548: $log = '';
! 2549:
! 2550: # Try to reconstruct the relative filename if RCS spits out a full path
! 2551: $filename =~ s%^\Q$DirName\E/%%;
! 2552: }
! 2553: next;
! 2554: }
! 2555:
! 2556: if ($state eq "tags") {
! 2557: if (/^\s+([^:]+):\s+([\d\.]+)\s*$/) {
! 2558: push (@filetags, $1);
! 2559: $symrev{$1} = $2;
! 2560: $alltags{$1} = 1;
! 2561: next;
! 2562: } elsif (/^\S/) {
! 2563:
! 2564: if (defined($tag)) {
! 2565: if (defined($symrev{$tag}) || $tag eq "HEAD") {
! 2566: $revwanted = $symrev{$tag eq "HEAD" ? "MAIN" : $tag};
! 2567: ($branch = $revwanted) =~ s/\b0\.//;
! 2568: ($branchpoint = $branch) =~ s/\.?\d+$//;
! 2569: $revwanted = '' if ($revwanted ne $branch);
! 2570: } elsif ($tag ne "HEAD") {
! 2571: $state = "skip";
! 2572: next;
! 2573: }
! 2574: }
! 2575:
! 2576: foreach my $tagfound (@filetags) {
! 2577: $tags{$tagfound} = 1;
! 2578: }
! 2579: $state = "head";
! 2580: goto again;
! 2581: }
! 2582: }
! 2583:
! 2584: if ($state eq "log") {
! 2585: if ($_ =~ LOG_REVSEPR || $_ =~ LOG_FILESEPR) {
! 2586:
! 2587: # End of a log entry.
! 2588: my $revbranch = $rev;
! 2589: $revbranch =~ s/\.\d+$//;
! 2590:
! 2591: if ($revwanted eq '' && $branch ne '' && $branch eq $revbranch
! 2592: || !defined($tag))
! 2593: {
! 2594: $revwanted = $rev;
! 2595: }
! 2596:
! 2597: if ($revwanted ne ''
! 2598: ? $rev eq $revwanted
! 2599: : $branchpoint ne ''
! 2600: ? $rev eq $branchpoint
! 2601: : 0
! 2602: && ($rev eq $head))
! 2603: { # Don't think head is needed here..
! 2604: my @finfo = ($rev, $date, $log, $author, $filename, $keywordsubst);
! 2605: (my $name = $filename) =~ s%/.*%%;
! 2606: $fileinfo{$name} = [@finfo];
! 2607: $state = "done" if ($rev eq $revwanted);
! 2608: }
! 2609: $rev = '';
! 2610: $date = '';
! 2611: $log = '';
! 2612: } elsif ($date eq ''
! 2613: && m|^date:\s+(\d+)/(\d+)/(\d+)\s+(\d+):(\d+):(\d+);|)
! 2614: {
! 2615: my $yr = $1;
! 2616: $yr -= 1900 if ($yr > 100); # Damn 2-digit year routines :-)
! 2617: $date = timegm($6, $5, $4, $3, $2 - 1, $yr);
! 2618: ($author) = /author: ([^;]+)/;
! 2619: $state = 'log';
! 2620: $log = '';
! 2621: next;
! 2622: } elsif ($rev eq '' && /^revision (\d+(?:\.\d+)+).*$/) {
! 2623: $rev = $1; # .*$ eats up the locker(lockers?) info, if any
! 2624: next;
! 2625: } else {
! 2626: $log .= $_;
! 2627: }
! 2628: }
! 2629:
! 2630: if ($_ =~ LOG_FILESEPR) {
! 2631: $state = "start";
! 2632: next;
! 2633: }
! 2634: }
! 2635:
! 2636: my $linesread = $. || 0;
! 2637: close($fh);
! 2638:
! 2639: if ($linesread == 0) {
! 2640: fatal('500 Internal Error',
! 2641: 'Failed to spawn GNU rlog on <em>"%s"</em>.<br /><br />Did you set the <b><code>@command_path</code></b> in your configuration file correctly? (Currently: "<code>%s</code>")',
! 2642: htmlquote(join(', ', @files)), join(':', @command_path));
! 2643: }
! 2644:
! 2645: return @unreadable;
1.45.2.46 knu 2646: }
2647:
1.45.2.91! simon 2648:
! 2649: sub readLog($;$)
! 2650: {
! 2651: my ($fullname, $revision) = @_;
! 2652: my ($symnames, $head, $rev, $br, $brp, $branch, $branchrev);
! 2653:
! 2654: undef %symrev;
! 2655: undef %revsym;
! 2656: undef @allrevisions;
! 2657: undef %date;
! 2658: undef %author;
! 2659: undef %state;
! 2660: undef %difflines;
! 2661: undef %log;
! 2662: $keywordsubstitution = '';
! 2663:
! 2664: my $fh = do { local (*FH); };
! 2665: if (!open($fh, "-|")) { # child
! 2666: openOutputFilter();
! 2667: $revision = defined($revision) ? "-r$revision" : '';
! 2668: if ($revision =~ /\./) {
! 2669: # Normal revision, not a branch/tag name.
! 2670: exec($CMD{rlog}, $revision, $fullname) or exit -1;
! 2671: } else {
! 2672: exec($CMD{rlog}, $fullname) or exit -1;
! 2673: }
! 2674: }
! 2675:
! 2676: my $curbranch = undef;
! 2677: while (<$fh>) {
! 2678: if ($symnames) {
! 2679: if (/^\s+([^:]+):\s+([\d\.]+)/) {
! 2680: $symrev{$1} = $2;
! 2681: next;
! 2682: } else {
! 2683: $symnames = 0;
! 2684: }
! 2685: }
! 2686: if (/^head:\s+([\d\.]+)/) {
! 2687: $head = $1;
! 2688: } elsif (/^branch:\s+([\d\.]+)/) {
! 2689: $curbranch = $1;
! 2690: } elsif (/^symbolic names/) {
! 2691: $symnames = 1;
! 2692: } elsif (/^keyword substitution: (.+)$/) {
! 2693: $keywordsubstitution = $1;
! 2694: } elsif (/^-----/) {
! 2695: last;
! 2696: }
! 2697: }
! 2698: ($curbranch = $head) =~ s/\.\d+$// if (!defined($curbranch));
! 2699:
! 2700: # each log entry is of the form:
! 2701: # ----------------------------
! 2702: # revision 3.7.1.1
! 2703: # date: 1995/11/29 22:15:52; author: fenner; state: Exp; lines: +5 -3
! 2704: # log info
! 2705: # ----------------------------
! 2706:
! 2707: # For a locked revision, the first line after the separator
! 2708: # becomes smth like
! 2709: # revision 9.19 locked by: vassilii;
! 2710:
! 2711: logentry:
! 2712:
! 2713: while ($_ !~ LOG_FILESEPR) {
! 2714: $_ = <$fh>;
! 2715: last logentry if (!defined($_)); # EOF
! 2716: if (/^revision (\d+(?:\.\d+)+)/) {
! 2717: $rev = $1;
! 2718: unshift(@allrevisions, $rev);
! 2719: } elsif ($_ =~ LOG_FILESEPR || $_ =~ LOG_REVSEPR) {
! 2720: next logentry;
! 2721: } else {
! 2722:
! 2723: # The rlog output is syntactically ambiguous. We must
! 2724: # have guessed wrong about where the end of the last log
! 2725: # message was.
! 2726: # Since this is likely to happen when people put rlog output
! 2727: # in their commit messages, don't even bother keeping
! 2728: # these lines since we don't know what revision they go with
! 2729: # any more.
! 2730: next logentry;
! 2731: }
! 2732: $_ = <$fh>;
! 2733: if (
! 2734: m|^date:\s+(\d+)/(\d+)/(\d+)\s+(\d+):(\d+):(\d+);\s+author:\s+(\S+);\s+state:\s+(\S+);\s+(lines:\s+([0-9\s+-]+))?|
! 2735: )
! 2736: {
! 2737: my $yr = $1;
! 2738: $yr -= 1900 if ($yr > 100); # Damn 2-digit year routines :-)
! 2739: $date{$rev} = timegm($6, $5, $4, $3, $2 - 1, $yr);
! 2740: $author{$rev} = $7;
! 2741: $state{$rev} = $8;
! 2742: $difflines{$rev} = $10;
! 2743: } else {
! 2744: fatal("500 Internal Error", 'Error parsing RCS output: %s', $_);
! 2745: }
! 2746:
! 2747: line:
! 2748: while (<$fh>) {
! 2749: next line if (/^branches:\s/);
! 2750: last line if ($_ =~ LOG_FILESEPR || $_ =~ LOG_REVSEPR);
! 2751: $log{$rev} .= $_;
! 2752: }
! 2753: }
! 2754: close($fh);
! 2755:
! 2756: @revorder = reverse sort { revcmp($a, $b) } @allrevisions;
! 2757:
! 2758: #
! 2759: # HEAD is an artificial tag which is simply the highest tag number on the main
! 2760: # branch, unless there is a branch tag in the RCS file in which case it's the
! 2761: # highest revision on that branch. Find it by looking through @revorder; it
! 2762: # is the first commit listed on the appropriate branch.
! 2763: # This is not neccesary the same revision as marked as head in the RCS file.
! 2764: my $headrev = $curbranch || "1";
! 2765: ($symrev{MAIN} = $headrev) =~ s/(\d+)$/0.$1/;
! 2766:
! 2767: foreach $rev (@revorder) {
! 2768: if ($rev =~ /^(\S*)\.\d+$/ && $headrev eq $1) {
! 2769: $symrev{HEAD} = $rev;
! 2770: last;
! 2771: }
! 2772: }
! 2773: ($symrev{HEAD} = $headrev) =~ s/\.\d+$// unless defined($symrev{HEAD});
! 2774:
! 2775: #
! 2776: # Now that we know all of the revision numbers, we can associate
! 2777: # absolute revision numbers with all of the symbolic names, and
! 2778: # pass them to the form so that the same association doesn't have
! 2779: # to be built then.
! 2780: #
! 2781: undef @branchnames;
! 2782: undef %branchpoint;
! 2783: undef $sel;
! 2784:
! 2785: foreach (reverse sort keys %symrev) {
! 2786: $rev = $symrev{$_};
! 2787: if ($rev =~ /^((.*)\.)?\b0\.(\d+)$/) {
! 2788: push (@branchnames, $_);
! 2789:
! 2790: #
! 2791: # A revision number of A.B.0.D really translates into
! 2792: # "the highest current revision on branch A.B.D".
! 2793: #
! 2794: # If there is no branch A.B.D, then it translates into
! 2795: # the head A.B .
! 2796: #
! 2797: # This reasoning also applies to the main branch A.B,
! 2798: # with the branch number 0.A, with the exception that
! 2799: # it has no head to translate to if there is nothing on
! 2800: # the branch, but I guess this can never happen?
! 2801: #
! 2802: # (the code below gracefully forgets about the branch
! 2803: # if it should happen)
! 2804: #
! 2805: $head = defined($2) ? $2 : "";
! 2806: $branch = $3;
! 2807: $branchrev = $head . ($head ne "" ? "." : "") . $branch;
! 2808: $rev = $head;
! 2809:
! 2810: my $regex = '^' . quotemeta($branchrev) . '\b';
! 2811: $regex = qr/$regex/;
! 2812:
! 2813: foreach my $r (@revorder) {
! 2814: if ($r =~ $regex) {
! 2815: $rev = $branchrev;
! 2816: last;
! 2817: }
! 2818: }
! 2819: next if ($rev eq "");
! 2820:
! 2821: if ($rev ne $head && $head ne "") {
! 2822: $branchpoint{$head} .= ', ' if ($branchpoint{$head});
! 2823: $branchpoint{$head} .= $_;
! 2824: }
! 2825: }
! 2826: $revsym{$rev} .= ", " if ($revsym{$rev});
! 2827: $revsym{$rev} .= $_;
! 2828: $sel .= sprintf("<option value=\"%s:%s\">%s</option>\n",
! 2829: htmlquote($rev), (htmlquote($_)) x 2);
! 2830: }
! 2831:
! 2832: my ($onlyonbranch, $onlybranchpoint);
! 2833: if ($onlyonbranch = $input{only_with_tag}) {
! 2834: $onlyonbranch = $symrev{$onlyonbranch};
! 2835: if ($onlyonbranch && $onlyonbranch =~ s/\b0\.//) {
! 2836: ($onlybranchpoint = $onlyonbranch) =~ s/\.\d+$//;
! 2837: } else {
! 2838: $onlybranchpoint = $onlyonbranch;
! 2839: }
! 2840:
! 2841: if (!defined($onlyonbranch) || $onlybranchpoint eq "") {
! 2842: fatal("404 Tag not found", 'Tag "<code>%s</code>" is not defined.',
! 2843: $input{only_with_tag});
! 2844: }
! 2845: }
! 2846:
! 2847: undef @revisions;
! 2848:
! 2849: foreach (@allrevisions) {
! 2850: ($br = $_) =~ s/\.\d+$//;
! 2851: ($brp = $br) =~ s/\.\d+$//;
! 2852: next if ($onlyonbranch
! 2853: && $br ne $onlyonbranch
! 2854: && $_ ne $onlybranchpoint);
! 2855: unshift(@revisions, $_);
! 2856: }
! 2857:
! 2858: if ($logsort eq "date") {
! 2859:
! 2860: # Sort the revisions in commit order an secondary sort on revision
! 2861: # (secondary sort needed for imported sources, or the first main
! 2862: # revision gets before the same revision on the 1.1.1 branch)
! 2863: @revdisplayorder =
! 2864: sort { $date{$b} <=> $date{$a} || -revcmp($a, $b) } @revisions;
! 2865: } elsif ($logsort eq "rev") {
! 2866:
! 2867: # Sort the revisions in revision order, highest first
! 2868: @revdisplayorder = reverse sort { revcmp($a, $b) } @revisions;
! 2869: } else {
! 2870:
! 2871: # No sorting. Present in the same order as rlog / cvs log
! 2872: @revdisplayorder = @revisions;
! 2873: }
! 2874:
! 2875: return $curbranch;
! 2876: }
! 2877:
! 2878:
! 2879: sub getDiffLinks($$$)
! 2880: {
! 2881: my ($url, $mimetype, $isbin) = @_;
! 2882:
! 2883: my @links = ();
! 2884: if (!$isbin) { # Offer ordinary diff only for non-binary files.
! 2885: push(@links, &link('preferred', $url));
! 2886: for my $difftype ($DIFFTYPES{$defaultDiffType}{colored} ? qw(u) : qw(h)) {
! 2887: my $f = $difftype eq $defaultDiffType ? '' : $difftype;
! 2888: push(@links,
! 2889: &link(htmlquote(lc($DIFFTYPES{$difftype}{descr})), "$url;f=$f"));
! 2890: }
! 2891: }
! 2892: if (my $extdiffs = $DIFF_COMMANDS{lc($mimetype)}) {
! 2893: for my $i (0 .. scalar(@$extdiffs)-1) {
! 2894: my $extdiff = $extdiffs->[$i];
! 2895: push(@links, &link(htmlquote($extdiff->{name}), "$url;f=ext$i"))
! 2896: if ($extdiff->{cmd} && $extdiff->{name});
! 2897: }
! 2898: }
! 2899: return @links;
! 2900: }
! 2901:
! 2902:
! 2903: sub printLog($$$;$$)
! 2904: {
! 2905: # inlogview: 1 if in log view, otherwise in markup view.
! 2906: ($_, my $mimetype, my $isbin, my $inlogview, my $isSelected) = @_;
! 2907: (my $br = $_) =~ s/\.\d+$//;
! 2908: (my $brp = $br) =~ s/\.?\d+$//;
! 2909:
! 2910: print "<a name=\"rev$_\"></a>";
! 2911: if (defined($revsym{$_})) {
! 2912: foreach my $sym (split(", ", $revsym{$_})) {
! 2913: print '<a name="', htmlquote($sym), '"></a>';
! 2914: }
! 2915: }
! 2916: if ($revsym{$br} && !defined($nameprinted{$br})) {
! 2917: foreach my $sym (split(", ", $revsym{$br})) {
! 2918: print '<a name="', htmlquote($sym), '"></a>';
! 2919: }
! 2920: $nameprinted{$br} = 1;
! 2921: }
! 2922:
! 2923: print "\n Revision <b>$_</b>";
! 2924: if (/^1\.1\.1\.\d+$/) {
! 2925: print " <i>(vendor branch)</i>";
! 2926: }
! 2927:
! 2928: (my $filename = $where) =~ s|^.*/||;
! 2929: my $fileurl = uri_escape($filename);
! 2930: undef $filename;
! 2931:
! 2932: my $isDead = ($state{$_} eq 'dead');
! 2933: if (!$isDead) {
! 2934:
! 2935: print ': ', download_link($fileurl, $_, 'download', $mimetype);
! 2936:
! 2937: my @vlinks = ();
! 2938: push(@vlinks, display_link($fileurl, $_, 'text', 'text/plain'))
! 2939: unless $isbin;
! 2940: push(@vlinks, display_link($fileurl, $_, 'markup', 'text/x-cvsweb-markup'))
! 2941: if ($allow_markup && $inlogview && (!$isbin || viewable($mimetype)));
! 2942: if (!$isbin && $allow_annotate) {
! 2943: push(@vlinks,
! 2944: &link('annotated',
! 2945: sprintf('%s?annotate=%s%s', $fileurl, $_, $barequery)));
! 2946: }
! 2947: print ' - view: ', join(', ', @vlinks) if @vlinks;
! 2948: undef @vlinks;
! 2949:
! 2950: if (!$isbin && $allow_version_select) {
! 2951: print ' - ';
! 2952: if ($isSelected) {
! 2953: print '<b>[selected for diffs]</b>';
! 2954: } else {
! 2955: print &link('select for diffs',
! 2956: sprintf('%s?r1=%s%s#rev%s',
! 2957: $fileurl, $_, $barequery, $_));
! 2958: }
! 2959: }
! 2960: print ' - ', graph_link('', 'revision graph')
! 2961: if (!$inlogview && $allow_cvsgraph);
! 2962: }
! 2963: print "<br />\n";
! 2964:
! 2965: print '<i>';
! 2966: if (defined @mytz) {
! 2967: my ($est) = $mytz[(localtime($date{$_}))[8]];
! 2968: print scalar localtime($date{$_}), " $est</i> (";
! 2969: } else {
! 2970: print scalar gmtime($date{$_}), " UTC</i> (";
! 2971: }
! 2972: print readableTime(time() - $date{$_}, 1), ' ago)';
! 2973: print ' by <i>', htmlquote($author{$_}), "</i><br />\n";
! 2974:
! 2975: printf("Branches: %s<br />\n", link_tags($revsym{$br})) if $revsym{$br};
! 2976: printf("CVS tags: %s<br />\n", link_tags($revsym{$_})) if $revsym{$_};
! 2977: printf("Branch point for: %s<br />\n", link_tags($branchpoint{$_}))
! 2978: if $branchpoint{$_};
! 2979:
! 2980: # Find the previous revision
! 2981: my $prev;
! 2982: my @prevrev = split(/\./, $_);
! 2983: do {
! 2984: if (--$prevrev[$#prevrev] <= 0) {
! 2985:
! 2986: # If it was X.Y.Z.1, just make it X.Y
! 2987: pop (@prevrev);
! 2988: pop (@prevrev);
! 2989: }
! 2990: $prev = join (".", @prevrev);
! 2991: } until (defined($date{$prev}) || $prev eq "");
! 2992:
! 2993: if ($isDead) {
! 2994: print "<b><i>FILE REMOVED</i></b><br />\n";
! 2995: } else {
! 2996: my %diffrev = ();
! 2997: $diffrev{$_} = 1;
! 2998: $diffrev{""} = 1;
! 2999: my $diff = 'Diff to:';
! 3000: my $printed = 0;
! 3001:
! 3002: #
! 3003: # Offer diff to previous revision
! 3004: if ($prev) {
! 3005: $diffrev{$prev} = 1;
! 3006: my $url =
! 3007: sprintf('%s.diff?r1=%s;r2=%s%s', $fileurl, $prev, $_, $barequery);
! 3008: if (my @dlinks = getDiffLinks($url, $mimetype, $isbin)) {
! 3009: print $diff, ' previous ', $prev, ': ', join(', ', @dlinks);
! 3010: $diff = ';'; $printed = 1;
! 3011: }
! 3012: }
! 3013:
! 3014: #
! 3015: # Plus, if it's on a branch, and it's not a vendor branch,
! 3016: # offer a diff with the branch point.
! 3017: if ($revsym{$brp}
! 3018: && !/^1\.1\.1\.\d+$/
! 3019: && !defined($diffrev{$brp}))
! 3020: {
! 3021: my $url =
! 3022: sprintf('%s.diff?r1=%s;r2=%s%s', $fileurl, $brp, $_, $barequery);
! 3023: if (my @dlinks = getDiffLinks($url, $mimetype, $isbin)) {
! 3024: print $diff, ' branchpoint ', $brp, ': ', join(', ', @dlinks);
! 3025: $diff = ';'; $printed = 1;
! 3026: }
! 3027: }
! 3028:
! 3029: #
! 3030: # Plus, if it's on a branch, and it's not a vendor branch,
! 3031: # offer to diff with the next revision of the higher branch.
! 3032: # (e.g. change gets committed and then brought
! 3033: # over to -stable)
! 3034: if (/^\d+\.\d+\.\d+/ && !/^1\.1\.1\.\d+$/) {
! 3035: my ($i, $nextmain);
! 3036:
! 3037: for ($i = 0; $i < $#revorder && $revorder[$i] ne $_; $i++) {
! 3038: }
! 3039: my @tmp2 = split(/\./, $_);
! 3040: for ($nextmain = ""; $i > 0; $i--) {
! 3041: my $next = $revorder[$i - 1];
! 3042: my @tmp1 = split(/\./, $next);
! 3043:
! 3044: if (@tmp1 < @tmp2) {
! 3045: $nextmain = $next;
! 3046: last;
! 3047: }
! 3048:
! 3049: # Only the highest version on a branch should have
! 3050: # a diff for the "next MAIN".
! 3051: last
! 3052: if (@tmp1 - 1 <= @tmp2
! 3053: && join (".", @tmp1[0 .. $#tmp1 - 1]) eq
! 3054: join (".", @tmp2[0 .. $#tmp1 - 1]));
! 3055: }
! 3056:
! 3057: if (!defined($diffrev{$nextmain})) {
! 3058: $diffrev{$nextmain} = 1;
! 3059: my $url = sprintf('%s.diff?r1=%s;r2=%s%s',
! 3060: $fileurl, $nextmain, $_, $barequery);
! 3061: if (my @dlinks = getDiffLinks($url, $mimetype, $isbin)) {
! 3062: print $diff, ' next MAIN ', $nextmain, ': ', join(', ', @dlinks);
! 3063: $diff = ';'; $printed = 1;
! 3064: }
! 3065: }
! 3066: }
! 3067:
! 3068: # Plus if user has selected only r1, then present a link
! 3069: # to make a diff to that revision
! 3070: if (defined($input{r1}) && !defined($diffrev{$input{r1}})) {
! 3071: $diffrev{$input{r1}} = 1;
! 3072: my $url = sprintf('%s.diff?r1=%s;r2=%s%s',
! 3073: $fileurl, $input{r1}, $_, $barequery);
! 3074: if (my @dlinks = getDiffLinks($url, $mimetype, $isbin)) {
! 3075: print $diff, ' selected ', $input{r1}, ': ', join(', ', @dlinks);
! 3076: $diff = ';'; $printed = 1;
! 3077: }
! 3078: }
! 3079:
! 3080: print "<br />\n" if $printed;
! 3081: }
! 3082:
! 3083: if ($prev ne "" && $difflines{$_}) {
! 3084: printf "Changes since revision %s: %s lines<br />\n",
! 3085: htmlquote($prev), htmlquote($difflines{$_});
! 3086: }
! 3087:
! 3088: print "<pre class=\"log\">\n";
! 3089: print &htmlify($log{$_}, $allow_log_extra);
! 3090: print "</pre>\n";
! 3091: }
! 3092:
! 3093:
! 3094: #
! 3095: # Generates the HTML view for CvsGraph.
! 3096: #
! 3097: sub doGraphView()
! 3098: {
! 3099: (my $pathname = $where) =~ s|[^/]*$||;
! 3100: (my $filename = $where) =~ s|^.*/||;
! 3101:
! 3102: navigateHeader($scriptwhere, $pathname, $filename, undef, 'graph');
! 3103:
! 3104: my $title = 'Revision graph of ' . htmlquote($pathname . $filename);
! 3105: my $mapname = 'CvsGraphMap';
! 3106:
! 3107: printf(<<EOF, $title, $mapname, $cvstree, $title);
! 3108: <h3 style="text-align: center">%s</h3>
! 3109: <div style="text-align: center"><img border="0" usemap="#%s" src="?cvsroot=%s;graph=1;makeimage=1" alt="%s" />
! 3110: EOF
! 3111:
! 3112: # Remove any pre-existing tag/branch names from branch links.
! 3113: (my $notag_query = $barequery) =~ s/;+only_with_tag=.*?(?=;|$)//g;
! 3114:
! 3115: my @graph_cmd =
! 3116: ($CMD{cvsgraph},
! 3117: '-r', $cvsroot,
! 3118: '-m', $pathname,
! 3119: '-i',
! 3120: '-M', $mapname,
! 3121: '-x', 'x',
! 3122: "-Omap_branch_href=\"href=\\\"./?only_with_tag=%(%t%)$notag_query\\\"\"",
! 3123: "-Omap_rev_href=\"href=\\\"?rev=%(%R%)$barequery\\\"\"",
! 3124: "-Omap_diff_href=\"href=\\\"%(%F%).diff" .
! 3125: "?r1=%(%P%);r2=%(%R%)$barequery\\\"\"",
! 3126: );
! 3127: push(@graph_cmd, '-c', $cvsgraph_config) if $cvsgraph_config;
! 3128: push(@graph_cmd, $filename . ',v');
! 3129:
! 3130: local *CVSGRAPH_OUT;
! 3131: my ($h, $err) =
! 3132: startproc(\@graph_cmd, \"", '>pipe', \*CVSGRAPH_OUT);
! 3133: fatal('500 Internal Error', $err) unless $h;
! 3134:
! 3135: # Browser compatibility kludge: many browsers do not support client side
! 3136: # image maps where the <map> element contains only the id attribute. Let's
! 3137: # add the corresponding name attribute to it on the fly.
! 3138: while (<CVSGRAPH_OUT>) {
! 3139: s/(<map\s+id="([^"]+)")\s*>/$1 name="$2">/;
! 3140: print;
! 3141: }
! 3142:
! 3143: $h->finish();
! 3144: print "</div>\n";
! 3145:
! 3146: html_footer();
! 3147: }
! 3148:
! 3149:
! 3150: #
! 3151: # Generates a graph using CvsGraph.
! 3152: #
! 3153: sub doGraph()
! 3154: {
! 3155: (my $pathname = $where) =~ s|[^/]*$||;
! 3156: (my $filename = $where) =~ s|^.*/||;
! 3157:
! 3158: http_header('image/png');
! 3159:
! 3160: my @graph_cmd = ($CMD{cvsgraph}, '-r', $cvsroot, '-m', $pathname);
! 3161: push(@graph_cmd, '-c', $cvsgraph_config) if $cvsgraph_config;
! 3162: push(@graph_cmd, $filename . ',v');
! 3163:
! 3164: local *CVSGRAPH_OUT;
! 3165: my ($h, $err) =
! 3166: startproc(\@graph_cmd, \"", '>pipe', \*CVSGRAPH_OUT);
! 3167: fatal('500 Internal Error', $err) unless $h;
! 3168: {
! 3169: local $/ = undef;
! 3170: binmode(\*STDOUT);
! 3171: print <CVSGRAPH_OUT>;
! 3172: }
! 3173: $h->finish();
! 3174: }
! 3175:
! 3176:
! 3177: sub doLog($)
! 3178: {
! 3179: my ($fullname) = @_;
! 3180:
! 3181: my $curbranch = readLog($fullname);
! 3182:
! 3183: html_header("CVS log for $where");
! 3184:
! 3185: my $upwhere = $where;
! 3186: (my $filename = $where) =~ s|^.*/||;
! 3187: my $backurl = "./$query#" . uri_escape($filename);
! 3188: if ($where =~ m|^(.*?)((?<=/)Attic/)?[^/]+$|) {
! 3189: $upwhere = $1;
! 3190: $backurl = ".$backurl" if $2; # skip over Attic
! 3191: }
! 3192:
! 3193: my $isbin = $keywordsubstitution =~ /b/;
! 3194: my $mimetype = getMimeType($filename, $isbin);
! 3195:
! 3196: print "<p>\n ";
! 3197: print &link($backicon, $backurl), " <b>Up to ",
! 3198: &clickablePath($upwhere, 1), "</b>\n</p>\n";
! 3199: print "<p>\n ";
! 3200: print &link('Request diff between arbitrary revisions', '#diff');
! 3201: print ' - ', &graph_link('', 'Display revisions graphically')
! 3202: if $allow_cvsgraph;
! 3203: if ($cvshistory_url) {
! 3204: (my $d = $upwhere) =~ s|/+$||;
! 3205: print ' - ', history_link($d, $filename);
! 3206: }
! 3207: print "\n</p>\n<hr />\n";
! 3208:
! 3209: print "<p>\n";
! 3210:
! 3211: my $explain = $isbin ? ' (i.e.: CVS considers this a binary file)' : '';
! 3212: print "Keyword substitution: $keywordsubstitution$explain<br />\n";
! 3213: if ($curbranch) {
! 3214: print "Default branch: ", ($revsym{$curbranch} || $curbranch);
! 3215: } else {
! 3216: print "No default branch";
! 3217: }
! 3218: print "<br />\n";
! 3219:
! 3220: print 'Current tag: ', htmlquote($input{only_with_tag}), "<br />\n"
! 3221: if $input{only_with_tag};
! 3222: print "</p>\n";
! 3223:
! 3224: undef %nameprinted;
! 3225:
! 3226: for my $r (@revdisplayorder) {
! 3227: print "<hr />\n";
! 3228: my $sel = (defined($input{r1}) && $input{r1} eq $r);
! 3229: print "<div class=\"diff-selected\">\n" if $sel;
! 3230: printLog($r, $mimetype, $isbin, 1, $sel);
! 3231: print "</div>\n" if $sel;
! 3232: }
! 3233:
! 3234: printf(<<EOF, $scriptwhere);
! 3235: <hr />
! 3236: <form method="get" action="%s.diff" id="diff_select">
! 3237: <fieldset>
! 3238: <legend>Diff request</legend>
! 3239: <p>
! 3240: <a name="diff">
! 3241: This form allows you to request diffs between any two revisions of a file.
! 3242: You may select a symbolic revision name using the selection box or you may
! 3243: type in a numeric name using the type-in text box.
! 3244: </a>
! 3245: </p>
! 3246: EOF
! 3247:
! 3248: foreach (@stickyvars) {
! 3249: printf("<input type=\"hidden\" name=\"%s\" value=\"%s\" />\n",
! 3250: $_, htmlquote($input{$_}))
! 3251: if (defined($input{$_}) &&
! 3252: (!defined($DEFAULTVALUE{$_}) || $input{$_} ne $DEFAULTVALUE{$_}));
! 3253: }
! 3254:
! 3255: print <<EOF;
! 3256: <table summary="Diff between arbitrary revisions">
! 3257: <tr>
! 3258: <td class="opt-label">
! 3259: <label for="r1" accesskey="1">Diffs between</label>
! 3260: </td>
! 3261: <td class="opt-value">
! 3262: <select id="r1" name="r1">
! 3263: <option value="text" selected="selected">Use Text Field</option>
! 3264: EOF
! 3265: print $sel, "</select>\n";
! 3266:
! 3267: my $diffrev = defined($input{r1}) ?
! 3268: $input{r1} : $revdisplayorder[$#revdisplayorder];
! 3269:
! 3270: printf(<<EOF, $inputTextSize, $diffrev);
! 3271: <input type="text" size="%s" name="tr1" value="%s" onchange="this.form.r1.selectedIndex=0" />
! 3272: </td>
! 3273: <td></td>
! 3274: </tr>
! 3275: <tr>
! 3276: <td class="opt-label">
! 3277: <label for="r2" accesskey="2">and</label>
! 3278: </td>
! 3279: <td class="opt-value">
! 3280: <select id="r2" name="r2">
! 3281: <option value="text" selected="selected">Use Text Field</option>
! 3282: EOF
! 3283: print $sel, "</select>\n";
! 3284:
! 3285: $diffrev = defined($input{r2}) ? $input{r2} : $revdisplayorder[0];
! 3286:
! 3287: printf(<<EOF, $inputTextSize, $diffrev, $scriptwhere);
! 3288: <input type="text" size="%s" name="tr2" value="%s" onchange="this.form.r2.selectedIndex=0" />
! 3289: </td>
! 3290: <td><input type="submit" value="Get Diffs" accesskey="G" /></td>
! 3291: </tr>
! 3292: </table>
! 3293: </fieldset>
! 3294: </form>
! 3295: <form method="get" action="%s">
! 3296: <fieldset>
! 3297: <legend>Log view options</legend>
! 3298: <table summary="Log view options">
! 3299: <tr>
! 3300: <td class="opt-label">
! 3301: <label for="f" accesskey="D">Preferred diff type:</label>
! 3302: </td>
! 3303: <td class="opt-value">
! 3304: EOF
! 3305: printDiffSelect($use_java_script);
! 3306: print <<EOF;
! 3307: </td>
! 3308: <td></td>
! 3309: </tr>
! 3310: EOF
! 3311:
! 3312: if (@branchnames) {
! 3313:
! 3314: printf(<<EOF, $use_java_script ? ' onchange="this.form.submit()"' : '');
! 3315: <tr>
! 3316: <td class="opt-label">
! 3317: <label for="only_with_tag" accesskey="B">View only branch:</label>
! 3318: </td>
! 3319: <td class="opt-value">
! 3320: <a name="branch">
! 3321: <select id="only_with_tag" name="only_with_tag"%s>
! 3322: EOF
! 3323:
! 3324: my @tmp = ();
! 3325: my $selfound = 0;
! 3326: foreach (reverse sort @branchnames) {
! 3327: my $selected =
! 3328: (defined($input{only_with_tag}) && $input{only_with_tag} eq $_);
! 3329: $selfound ||= $selected;
! 3330: push(@tmp, sprintf('<option%s>%s</option>',
! 3331: $selected ? ' selected="selected"' : '',
! 3332: htmlquote($_)));
! 3333: }
! 3334: printf("<option value=\"\"%s>Show all branches</option>\n",
! 3335: $selfound ? '' : ' selected="selected"');
! 3336: print join("\n", @tmp);
! 3337:
! 3338: print <<EOF
! 3339: </select>
! 3340: </a>
! 3341: </td>
! 3342: <td></td>
! 3343: </tr>
! 3344: EOF
! 3345: }
! 3346:
! 3347: print <<EOF;
! 3348: <tr>
! 3349: <td class="opt-label">
! 3350: <label for="logsort" accesskey="L">Sort log by:</label>
! 3351: </td>
! 3352: <td>
! 3353: EOF
! 3354: printLogSortSelect($use_java_script);
! 3355: print <<EOF;
! 3356: </td>
! 3357: <td><input type="submit" value="Set" accesskey="S" /></td>
! 3358: </tr>
! 3359: </table>
! 3360: EOF
! 3361: foreach (@stickyvars) {
! 3362: next if ($_ eq "f");
! 3363: next if ($_ eq "only_with_tag");
! 3364: next if ($_ eq "logsort");
! 3365: printf("<input type=\"hidden\" name=\"$_\" value=\"%s\" />\n",
! 3366: htmlquote($input{$_}))
! 3367: if (defined($input{$_})
! 3368: && (!defined($DEFAULTVALUE{$_}) || $input{$_} ne $DEFAULTVALUE{$_}));
! 3369: }
! 3370: print "</fieldset>\n</form>\n";
! 3371: html_footer();
! 3372: }
! 3373:
! 3374:
! 3375: sub flush_diff_rows($$$$)
! 3376: {
! 3377: my ($leftColRef, $rightColRef, $leftRow, $rightRow) = @_;
! 3378:
! 3379: return unless defined($state);
! 3380:
! 3381: if ($state eq "PreChangeRemove") { # we just got remove-lines before
! 3382: for (my $j = 0; $j < $leftRow; $j++) {
! 3383: printf(<<EOF, spacedHtmlText(@$leftColRef[$j]));
! 3384: <tr>
! 3385: <td class="diff diff-removed"> %s</td>
! 3386: <td class="diff diff-empty"> </td>
! 3387: </tr>
! 3388: EOF
! 3389: }
! 3390: } elsif ($state eq "PreChange") { # state eq "PreChange"
! 3391: # we got removes with subsequent adds
! 3392: if (HAS_EDIFF) {
! 3393: # construct the suffix tree
! 3394: my $left_diff = join("\n", @$leftColRef[0..$leftRow-1]);
! 3395: my $right_diff = join("\n", @$rightColRef[0..$rightRow-1]);
! 3396: my $diff_str = String::Ediff::ediff($left_diff, $right_diff);
! 3397:
! 3398: my @diff_str = split(/ /, $diff_str);
! 3399: my $INFINITY = 10000000;
! 3400: push(@diff_str, ($INFINITY) x 8);
! 3401: my ($idx, $b1, $e1, $lb1, $le1, $b2, $e2, $lb2, $le2) =
! 3402: (0, @diff_str[0..7]);
! 3403: my ($l_cul, $r_cul) = (0, 0);
! 3404: my ($ldx, $rdx) = (0, 0);
! 3405: my (@left_html, @right_html);
! 3406: for (my $j = 0; $j < $leftRow; $j++) {
! 3407: my $line_len = length(@$leftColRef[$j]);
! 3408: my $line = @$leftColRef[$j];
! 3409: $l_cul += length($line) + 1; # includes "\n"
! 3410: my $l_culx = $l_cul - 1; # not includes "\n"
! 3411: if ($j < $lb1) {
! 3412: $line = spacedHtmlText($line);
! 3413: push(@left_html, "<td class=\"diff diff-changed\">$line</td>");
! 3414: } elsif ($lb1 == $j) {
! 3415: my $html_line;
! 3416: while ($lb1 == $j) {
! 3417: my $begin_char = $l_culx - $b1;
! 3418:
! 3419: $line =~ /^(.*)(.{$begin_char})$/;
! 3420: $html_line .= spacedHtmlText($1) .
! 3421: '</span><span class="diff diff-unchanged">';
! 3422: $line = $2;
! 3423: last if ($j != $le1);
! 3424:
! 3425: my $end_char = $l_culx - $e1;
! 3426: $line =~ /^(.*)(.{$end_char})$/;
! 3427: $html_line .= spacedHtmlText($1) .
! 3428: '</span><span class="diff diff-changed">';
! 3429: $line = $2;
! 3430:
! 3431: $idx++;
! 3432: my ($tb1, $te1, $tlb1, $tle1, $tb2, $te2, $tlb2, $tle2) =
! 3433: ($b1, $e1, $lb1, $le1, $b2, $e2, $lb2, $le2);
! 3434: ($b1, $e1, $lb1, $le1, $b2, $e2, $lb2, $le2) =
! 3435: @diff_str[$idx*8..($idx+1)*8-1];
! 3436: $lb1 = $INFINITY if ($lb1 < 0);
! 3437: $lb2 = $INFINITY if ($lb2 < 0);
! 3438: $le1 = $INFINITY if ($le1 < 0);
! 3439: $le2 = $INFINITY if ($le2 < 0);
! 3440: if ($te1 > $b1) {
! 3441: ($b1, $lb1) = ($te1, $tle1);
! 3442: }
! 3443: if ($te2 > $b2) {
! 3444: ($b2, $lb2) = ($te2, $tle2);
! 3445: }
! 3446: }
! 3447: push(@left_html,
! 3448: sprintf('<td><span class="diff diff-changed">%s%s</span></td>',
! 3449: $html_line, spacedHtmlText($line)));
! 3450: } elsif ($le1 == $j) {
! 3451: my $html_line;
! 3452: while ($le1 == $j) {
! 3453: my $end_char = $l_culx - $e1;
! 3454: $line =~ /^(.*)(.{$end_char})$/;
! 3455: $html_line .= spacedHtmlText($1) .
! 3456: '</span><span class="diff diff-changed">';
! 3457: $line = $2;
! 3458:
! 3459: $idx++;
! 3460: my ($tb1, $te1, $tlb1, $tle1, $tb2, $te2, $tlb2, $tle2) =
! 3461: ($b1, $e1, $lb1, $le1, $b2, $e2, $lb2, $le2);
! 3462: ($b1, $e1, $lb1, $le1, $b2, $e2, $lb2, $le2) =
! 3463: @diff_str[$idx*8..($idx+1)*8-1];
! 3464: $lb1 = $INFINITY if ($lb1 < 0);
! 3465: $lb2 = $INFINITY if ($lb2 < 0);
! 3466: $le1 = $INFINITY if ($le1 < 0);
! 3467: $le2 = $INFINITY if ($le2 < 0);
! 3468: if ($te1 > $b1) {
! 3469: ($b1, $lb1) = ($te1, $tle1);
! 3470: }
! 3471: if ($te2 > $b2) {
! 3472: ($b2, $lb2) = ($te2, $tle2);
! 3473: }
! 3474:
! 3475: last if ($lb1 != $j);
! 3476:
! 3477: my $begin_char = $l_culx - $b1;
! 3478:
! 3479: $line =~ /^(.*)(.{$begin_char})$/;
! 3480: $html_line .= spacedHtmlText($1) .
! 3481: '</span><span class="diff diff-unchanged">';
! 3482: $line = $2;
! 3483: }
! 3484: push(@left_html,
! 3485: sprintf('<td><span class="diff diff-unchanged">%s%s</span></td>',
! 3486: $html_line, spacedHtmlText($line)));
! 3487: } else {
! 3488: $line = spacedHtmlText($line);
! 3489: push(@left_html, "<td class=\"diff diff-unchanged\">$line</td>");
! 3490: }
! 3491: }
! 3492: ($idx, $b1, $e1, $lb1, $le1, $b2, $e2, $lb2, $le2) =
! 3493: (0, @diff_str[0..7]);
! 3494: $lb1 = $INFINITY if ($lb1 < 0);
! 3495: $lb2 = $INFINITY if ($lb2 < 0);
! 3496: $le1 = $INFINITY if ($le1 < 0);
! 3497: $le2 = $INFINITY if ($le2 < 0);
! 3498: for (my $j = 0; $j < $rightRow; $j++) {
! 3499: my $line_len = length(@$rightColRef[$j]);
! 3500: my $line = @$rightColRef[$j];
! 3501: $r_cul += length($line) + 1; # includes "\n"
! 3502: my $r_culx = $r_cul - 1; # not includes "\n"
! 3503: if ($j < $lb2) {
! 3504: $line = spacedHtmlText($line);
! 3505: push(@right_html, "<td class=\"diff diff-changed\">$line</td>");
! 3506: } elsif ($lb2 == $j) {
! 3507: my $html_line;
! 3508: while ($lb2 == $j) {
! 3509: my $begin_char = $r_culx - $b2;
! 3510:
! 3511: $line =~ /^(.*)(.{$begin_char})$/;
! 3512: $html_line .= spacedHtmlText($1) .
! 3513: '</span><span class="diff diff-unchanged">';
! 3514: $line = $2;
! 3515:
! 3516: last if ($j != $le2);
! 3517:
! 3518: my $end_char = $r_culx - $e2;
! 3519: $line =~ /^(.*)(.{$end_char})$/;
! 3520: $html_line .= spacedHtmlText($1) .
! 3521: '</span><span class="diff diff-changed">';
! 3522: $line = $2;
! 3523:
! 3524: $idx++;
! 3525: my ($tb1, $te1, $tlb1, $tle1, $tb2, $te2, $tlb2, $tle2) =
! 3526: ($b1, $e1, $lb1, $le1, $b2, $e2, $lb2, $le2);
! 3527: ($b1, $e1, $lb1, $le1, $b2, $e2, $lb2, $le2) =
! 3528: @diff_str[$idx*8..($idx+1)*8-1];
! 3529: $lb1 = $INFINITY if ($lb1 < 0);
! 3530: $lb2 = $INFINITY if ($lb2 < 0);
! 3531: $le1 = $INFINITY if ($le1 < 0);
! 3532: $le2 = $INFINITY if ($le2 < 0);
! 3533: if ($te1 > $b1) {
! 3534: ($b1, $lb1) = ($te1, $tle1);
! 3535: }
! 3536: if ($te2 > $b2) {
! 3537: ($b2, $lb2) = ($te2, $tle2);
! 3538: }
! 3539: }
! 3540: push(@right_html,
! 3541: sprintf('<td><span class="diff diff-changed">%s%s</span></td>',
! 3542: $html_line, spacedHtmlText($line)));
! 3543: } elsif ($le2 == $j) {
! 3544: my $html_line;
! 3545: while ($le2 == $j) {
! 3546: my $end_char = $r_culx - $e2;
! 3547: $line =~ /^(.*)(.{$end_char})$/;
! 3548: $html_line .= spacedHtmlText($1) .
! 3549: '</span><span class="diff diff-changed">';
! 3550: $line = $2;
! 3551:
! 3552: $idx++;
! 3553: my ($tb1, $te1, $tlb1, $tle1, $tb2, $te2, $tlb2, $tle2) =
! 3554: ($b1, $e1, $lb1, $le1, $b2, $e2, $lb2, $le2);
! 3555: ($b1, $e1, $lb1, $le1, $b2, $e2, $lb2, $le2) =
! 3556: @diff_str[$idx*8..($idx+1)*8-1];
! 3557: $lb1 = $INFINITY if ($lb1 < 0);
! 3558: $lb2 = $INFINITY if ($lb2 < 0);
! 3559: $le1 = $INFINITY if ($le1 < 0);
! 3560: $le2 = $INFINITY if ($le2 < 0);
! 3561: if ($te1 > $b1) {
! 3562: ($b1, $lb1) = ($te1, $tle1);
! 3563: }
! 3564: if ($te2 > $b2) {
! 3565: ($b2, $lb2) = ($te2, $tle2);
! 3566: }
! 3567:
! 3568: last if ($lb2 != $j);
! 3569:
! 3570: my $begin_char = $r_culx - $b2;
! 3571: $line =~ /^(.*)(.{$begin_char})$/;
! 3572: $html_line .= spacedHtmlText($1) .
! 3573: '</span><span class="diff diff-unchanged">';
! 3574: $line = $2;
! 3575: }
! 3576: push(@right_html,
! 3577: sprintf('<td nowrap="nowrap"><span class="diff diff-unchanged"'.
! 3578: '>%s%s</span></td>',
! 3579: $html_line, spacedHtmlText($line)));
! 3580: } else {
! 3581: $line = spacedHtmlText ($line);
! 3582: push @right_html, "<td class=\"diff diff-unchanged\">$line</td>";
! 3583: }
! 3584: }
! 3585: for (my $j = 0; $j < $leftRow || $j < $rightRow ; $j++) { # dump out both cols
! 3586: print '<tr>';
! 3587: if ($j < $leftRow) {
! 3588: print $left_html[$j];
! 3589: } else {
! 3590: print '<td class="diff diff-changed-missing"> </td>';
! 3591: }
! 3592: if ($j < $rightRow) {
! 3593: print $right_html[$j];
! 3594: } else {
! 3595: print '<td class="diff diff-changed-missing"> </td>';
! 3596: }
! 3597: print "</tr>\n";
! 3598: }
! 3599: } else {
! 3600: for (my $j = 0; $j < $leftRow || $j < $rightRow; $j++) { # dump both cols
! 3601: print "<tr>\n";
! 3602: if ($j < $leftRow) {
! 3603: print '<td class="diff diff-changed"> ' .
! 3604: spacedHtmlText(@$leftColRef[$j]) . '</td>';
! 3605: } else {
! 3606: print '<td class="diff diff-changed-missing"> </td>';
! 3607: }
! 3608: print "\n";
! 3609:
! 3610: if ($j < $rightRow) {
! 3611: print '<td class="diff diff-changed"> ' .
! 3612: spacedHtmlText(@$rightColRef[$j]) . '</td>';
! 3613: } else {
! 3614: print '<td class="diff diff-changed-missing"> </td>';
! 3615: }
! 3616: print "\n</tr>\n";
! 3617: }
! 3618: }
! 3619: }
! 3620: }
! 3621:
! 3622:
! 3623: #
! 3624: # Generates "human readable", HTMLified diffs.
! 3625: #
! 3626: sub human_readable_diff($$)
! 3627: {
! 3628: my ($fh, $rev) = @_;
! 3629:
! 3630: (my $where_nd = $where) =~ s|\.diff$||;
! 3631: (my $filename = $where_nd) =~ s|^.*/||;
! 3632: (my $pathname = $where_nd) =~ s|((?<=/)Attic/)?[^/]*$||;
! 3633: (my $scriptwhere_nd = $scriptwhere) =~ s|\.diff$||;
! 3634:
! 3635: navigateHeader($scriptwhere_nd, $pathname, $filename, $rev, 'diff');
! 3636:
! 3637: # Read header to pick up read revision and date, if possible.
! 3638:
! 3639: my ($r1d, $r1r, $r2d, $r2r);
! 3640: while (<$fh>) {
! 3641: ($r1d, $r1r) = /\t(.*)\t(.*)$/ if (/^--- /);
! 3642: ($r2d, $r2r) = /\t(.*)\t(.*)$/ if (/^\+\+\+ /);
! 3643: last if (/^\+\+\+ /);
! 3644: }
! 3645:
! 3646: my ($rev1, $date1);
! 3647: if (defined($r1r) && $r1r =~ /^(\d+\.)+\d+$/) {
! 3648: $rev1 = $r1r;
! 3649: $date1 = $r1d;
! 3650: }
! 3651: my ($rev2, $date2);
! 3652: if (defined($r2r) && $r2r =~ /^(\d+\.)+\d+$/) {
! 3653: $rev2 = $r2r;
! 3654: $date2 = $r2d;
! 3655: }
! 3656: $rev1 = $input{r1} unless defined($rev1);
! 3657: $rev1 = $input{tr1} if (defined($rev1) && $rev1 eq 'text');
! 3658: $rev1 = 'unknown-left' unless defined($rev1);
! 3659: $rev2 = $input{r2} unless defined($rev2);
! 3660: $rev2 = $input{tr2} if (defined($rev2) && $rev2 eq 'text');
! 3661: $rev2 = 'unknown-right' unless defined($rev2);
! 3662: $date1 = defined($date1) ? ', ' . htmlquote($date1) : '';
! 3663: $date2 = defined($date2) ? ', ' . htmlquote($date2) : '';
! 3664:
! 3665: my $link = uri_escape($filename) . ($query ? "$query;" : '?');
! 3666:
! 3667: # Using <table style=\"border: none\" here breaks NS 4.x badly...
! 3668: print <<EOF;
! 3669: <h3 style="text-align: center">Diff for /$where_nd between versions $rev1 and $rev2</h3>
! 3670: <table border="0" cellspacing="0" cellpadding="0" width="100%" summary="Diff output">
! 3671: <tr style="background-color: #ffffff">
! 3672: <th style="text-align: center; vertical-align: top" width="50%">
! 3673: <a href="${link}rev=$rev1">version $rev1</a>$date1
! 3674: </th>
! 3675: <th style="text-align: center; vertical-align: top" width="50%">
! 3676: <a href="${link}rev=$rev2">version $rev2</a>$date2
! 3677: </th>
! 3678: </tr>
! 3679: EOF
! 3680:
! 3681: # Process diff text
! 3682: # prefetch several lines
! 3683: my @buf = head($fh);
! 3684: my %d = scan_directives(@buf);
! 3685:
! 3686: my $leftRow = 0;
! 3687: my $rightRow = 0;
! 3688: my ($difftxt, @rightCol, @leftCol, $oldline, $newline, $funname);
! 3689:
! 3690: $link .= 'content-type=text%2Fx-cvsweb-markup;';
! 3691: $link .= 'ln=1;' unless ($link =~ /\?.*\bln=1\b/);
! 3692:
! 3693: while (@buf || !eof($fh)) {
! 3694: $difftxt = @buf ? shift @buf : <$fh>;
! 3695:
! 3696: if ($difftxt =~ /^@@/) {
! 3697: ($oldline, $newline, $funname) =
! 3698: $difftxt =~ /@@ \-([0-9]+).*\+([0-9]+).*@@(.*)/;
! 3699: $funname = htmlquote($funname);
! 3700: $funname =~ s/\s/ /go;
! 3701: $funname &&= " <span style=\"font-size: smaller\">$funname</span>";
! 3702: my $ol = $oldline || 1;
! 3703: my $nl = $newline || 1;
! 3704:
! 3705: print <<EOF;
! 3706: <tr>
! 3707: <td width="50%" class="diff-heading">
! 3708: <b><a href="${link}rev=$rev1#l$ol">Line $oldline</a></b>$funname
! 3709: </td>
! 3710: <td width="50%" class="diff-heading">
! 3711: <b><a href="${link}rev=$rev2#l$nl">Line $newline</a></b>$funname
! 3712: </td>
! 3713: </tr>
! 3714: EOF
! 3715:
! 3716: $state = "dump";
! 3717: $leftRow = 0;
! 3718: $rightRow = 0;
! 3719: } else {
! 3720: my ($diffcode, $rest) = $difftxt =~ /^([-+ ])(.*)/;
! 3721: $diffcode = '' unless defined($diffcode);
! 3722: $_ = $rest;
! 3723:
! 3724: #########
! 3725: # little state machine to parse unified-diff output (Hen, zeller@think.de)
! 3726: # in order to get some nice 'ediff'-mode output
! 3727: # states:
! 3728: # "dump" - just dump the value
! 3729: # "PreChangeRemove" - we began with '-' .. so this could be the start of a 'change' area or just remove
! 3730: # "PreChange" - okey, we got several '-' lines and moved to '+' lines -> this is a change block
! 3731: ##########
! 3732:
! 3733: if ($diffcode eq '+') {
! 3734: if ($state eq "dump")
! 3735: { # 'change' never begins with '+': just dump out value
! 3736: $_ = spacedHtmlText($rest, $d{tabstop});
! 3737: printf(<<EOF, $_);
! 3738: <tr>
! 3739: <td class="diff diff-empty"> </td>
! 3740: <td class="diff diff-added"> %s</td>
! 3741: </tr>
! 3742: EOF
! 3743: } else { # we got minus before
! 3744: $state = "PreChange";
! 3745: $rightCol[$rightRow++] = $_;
! 3746: }
! 3747: } elsif ($diffcode eq '-') {
! 3748: $state = "PreChangeRemove";
! 3749: $leftCol[$leftRow++] = $_;
! 3750: } else { # empty diffcode
! 3751: flush_diff_rows \@leftCol, \@rightCol, $leftRow, $rightRow;
! 3752: $_ = spacedHtmlText($rest, $d{tabstop});
! 3753: printf(<<EOF, $_, $_);
! 3754: <tr>
! 3755: <td class="diff diff-same"> %s</td>
! 3756: <td class="diff diff-same"> %s</td>
! 3757: </tr>
! 3758: EOF
! 3759: $state = "dump";
! 3760: $leftRow = 0;
! 3761: $rightRow = 0;
! 3762: }
! 3763: }
! 3764: }
! 3765: close($fh);
! 3766:
! 3767: flush_diff_rows \@leftCol, \@rightCol, $leftRow, $rightRow;
! 3768:
! 3769: # state is empty if we didn't have any change
! 3770: if (!$state) {
! 3771: print <<EOF;
! 3772: <tr>
! 3773: <td colspan="2"> </td>
! 3774: </tr>
! 3775: <tr class="diff diff-empty">
! 3776: <td colspan="2" align="center"><b>- No viewable change -</b></td>
! 3777: </tr>
! 3778: EOF
! 3779: }
! 3780:
! 3781: printf(<<EOF, $scriptwhere);
! 3782: </table>
! 3783: <hr style="width: 100%%" />
! 3784: <form method="get" action="%s">
! 3785: <div style="float: left">
! 3786: <label for="f">Diff format:<br />
! 3787: EOF
! 3788: printDiffSelectStickyVars();
! 3789: printDiffSelect($use_java_script);
! 3790: printf(<<EOF, $rev1, $rev2);
! 3791: </label>
! 3792: <input type="submit" value="Show" />
! 3793: </div>
! 3794: <table style="float: right; border: thin outset" cellspacing="0" cellpadding="1" title="Legend" summary="Legend">
! 3795: <tr>
! 3796: <td align="center" class="diff diff-removed">Removed from v.%s</td>
! 3797: <td class="diff diff-empty"> </td>
! 3798: </tr><tr class="diff diff-changed">
! 3799: <td align="center" colspan="2">changed lines</td>
! 3800: </tr><tr>
! 3801: <td class="diff diff-empty"> </td>
! 3802: <td align="center" class="diff diff-added">Added in v.%s</td>
! 3803: </tr>
! 3804: </table>
! 3805: </form>
! 3806: <br clear="all" />
! 3807: EOF
! 3808: }
! 3809:
! 3810:
! 3811: sub doEnscript($$$;$)
! 3812: {
! 3813: my ($filehandle, $highlight, $linenumbers, $lang) = @_;
! 3814: $lang ||= 'cvsweb';
! 3815:
! 3816: my @cmd = ($CMD{enscript},
! 3817: @enscript_options,
! 3818: '-q', "--language=$lang", '-o', '-', "--highlight=$highlight");
! 3819:
! 3820: local *ENSCRIPT_OUT;
! 3821: my ($h, $err) =
! 3822: startproc(\@cmd, $filehandle, '>pipe', \*ENSCRIPT_OUT);
! 3823: fatal('500 Internal Error', $err) unless $h;
! 3824:
! 3825: # We could short-circuit and have enscript output directly to STDOUT above,
! 3826: # but that doesn't work with mod_perl (at least some 1.99 versions).
! 3827: if ($linenumbers) {
! 3828: my $ln = 0;
! 3829: while (<ENSCRIPT_OUT>) {
! 3830: printf '<a id="l%d" class="src">%5d: </a>', (++$ln) x 2;
! 3831: print $_;
! 3832: }
! 3833: } else {
! 3834: local $/ = undef;
! 3835: print <ENSCRIPT_OUT>;
! 3836: }
! 3837: $h->finish();
1.45.2.46 knu 3838: }
3839:
1.45.2.91! simon 3840:
! 3841: #
! 3842: # The passed in $path and $filename should not be URI escaped, and $swhere
! 3843: # *should* be.
! 3844: #
! 3845: sub navigateHeader($$$$$;$)
! 3846: {
! 3847: my ($swhere, $path, $filename, $rev, $title, $moddate) = @_;
! 3848: $swhere = "" if ($swhere eq $scriptwhere);
! 3849: $swhere = './' . uri_escape($filename) if ($swhere eq "");
! 3850:
! 3851: my $qfile = htmlquote($filename);
! 3852: my $qpath = htmlquote($path);
! 3853: my $trev = $rev ? " - " . htmlquote($rev) : '';
! 3854:
! 3855: http_header('text/html', $moddate);
! 3856:
! 3857: (my $header = &cgi_style::html_header($title, 0)) =~ s,\A.*<head>,<head>\n$HTML_META,s;
! 3858: $header .= $CSS .
! 3859: '<body class="src">
! 3860: <table class="navigate-header" width="100%" summary="Navigation">
! 3861: <tr>
! 3862: <td>';
! 3863: print $header;
! 3864:
! 3865: my $frag = '';
! 3866: if ($rev) {
! 3867: $frag = '#';
! 3868: $frag .= 'rev' if ($rev =~ /\./); # Normal revision: prefix with "rev".
! 3869: $frag .= $rev; # Append revision/branch/tag.
! 3870: }
! 3871: my $backurl = "$swhere$query$frag";
! 3872:
! 3873: print &link($backicon, $backurl);
! 3874: printf '<b>Return to %s CVS log', &link($qfile, $backurl);
! 3875: print "</b> $fileicon</td>";
! 3876:
! 3877: printf(<<EOF, $diricon, &clickablePath($path, 1));
! 3878: <td style="text-align: right">%s <b>Up to %s</b></td>
! 3879: </tr>
! 3880: </table>
! 3881: EOF
! 3882: }
! 3883:
! 3884:
! 3885: sub plural_write($$)
! 3886: {
! 3887: my ($num, $text) = @_;
! 3888: if ($num != 1) {
! 3889: $text .= "s";
! 3890: }
! 3891:
! 3892: if ($num > 0) {
! 3893: return join (' ', $num, $text);
! 3894: } else {
! 3895: return "";
! 3896: }
! 3897: }
! 3898:
! 3899:
1.45.2.46 knu 3900: ##
3901: # print readable timestamp in terms of
3902: # '..time ago'
3903: # H. Zeller <zeller@think.de>
3904: ##
1.45.2.91! simon 3905: sub readableTime($$)
! 3906: {
! 3907: my ($secs, $long) = @_;
1.45.2.46 knu 3908:
1.45.2.91! simon 3909: # This function works correctly for time >= 2 seconds.
! 3910: return 'very little time' if ($secs < 2);
! 3911:
! 3912: my %desc = (
! 3913: 1 => 'second',
! 3914: 60 => 'minute',
! 3915: 3600 => 'hour',
! 3916: 86400 => 'day',
! 3917: 604800 => 'week',
! 3918: 2628000 => 'month',
! 3919: 31536000 => 'year'
! 3920: );
! 3921:
! 3922: my @breaks = sort { $a <=> $b } keys %desc;
! 3923: my $i = 0;
! 3924:
! 3925: while ($i <= $#breaks && $secs >= 2 * $breaks[$i]) {
! 3926: $i++;
! 3927: }
! 3928: $i--;
! 3929: my $break = $breaks[$i];
! 3930: my $retval = plural_write(int($secs / $break), $desc{$break});
! 3931:
! 3932: if ($long == 1 && $i > 0) {
! 3933: my $rest = $secs % $break;
! 3934: $i--;
! 3935: $break = $breaks[$i];
! 3936: my $resttime = plural_write(int($rest / $break), $desc{$break});
! 3937: if ($resttime) {
! 3938: $retval .= ", $resttime";
! 3939: }
! 3940: }
! 3941:
! 3942: return $retval;
1.45.2.46 knu 3943: }
3944:
1.45.2.91! simon 3945:
1.45.2.46 knu 3946: #
1.45.2.91! simon 3947: # Returns a htmlified path where each directory is a link for faster
! 3948: # navigation. $clickLast controls whether the basename
! 3949: # (last directory/file) is a link as well. The passed in $pathname should
! 3950: # *not* be URI escaped.
! 3951: #
! 3952: sub clickablePath($$)
! 3953: {
! 3954: my ($pathname, $clickLast) = @_;
! 3955:
! 3956: my $root = '[' . htmlquote($CVSROOTdescr{$cvstree} || $cvstree) . ']';
! 3957:
! 3958: # This should never happen (see chooseCVSRoot()), but let's be sure...
! 3959: return $root if ($pathname eq '/');
! 3960:
! 3961: my $retval =
! 3962: ' ' . &link($root, sprintf('%s/%s#dirlist', $scriptname, $query));
! 3963: my $wherepath = '';
! 3964: my ($lastslash) = $pathname =~ m|/$|;
! 3965:
! 3966: foreach (split(m|/|, $pathname)) {
! 3967: $retval .= ' / ';
! 3968: $wherepath .= "/$_";
! 3969: my $last = "$wherepath/" eq "/$pathname" || $wherepath eq "/$pathname";
! 3970:
! 3971: if ($clickLast || !$last) {
! 3972: $retval .= &link(htmlquote($_),
! 3973: join ('',
! 3974: $scriptname, uri_escape_path($wherepath),
! 3975: (!$last || $lastslash ? '/' : ''), $query,
! 3976: (!$last || $lastslash ? "#dirlist" : "")));
! 3977: } else { # do not make a link to the current dir
! 3978: $retval .= htmlquote($_);
! 3979: }
! 3980: }
! 3981: return $retval;
! 3982: }
! 3983:
! 3984:
! 3985: sub chooseCVSRoot()
! 3986: {
! 3987: print "<form method=\"get\" action=\"$scriptwhere\">\n<p>\n";
! 3988: if (2 <= @CVSROOT) {
! 3989: foreach my $k (keys %input) {
! 3990: printf("<input type=\"hidden\" name=\"%s\" value=\"%s\" />\n",
! 3991: htmlquote($k), htmlquote($input{$k}))
! 3992: if ($input{$k} && $k ne 'cvsroot');
! 3993: }
! 3994:
! 3995: printf(<<EOF, $use_java_script ? ' onchange="this.form.submit()"' : '');
! 3996: <label for="cvsroot" accesskey="C">CVS Root:
! 3997: <select id="cvsroot" name="cvsroot"%s>
! 3998: EOF
! 3999:
! 4000: foreach my $k (@CVSROOT) {
! 4001: printf("<option value=\"%s\"%s>%s</option>\n",
! 4002: htmlquote($k),
! 4003: ($k eq $cvstree) ? ' selected="selected"' : '',
! 4004: htmlquote($CVSROOTdescr{$k} || $k));
! 4005: }
! 4006: print '</select></label>';
! 4007: } else {
! 4008:
! 4009: # no choice -- but we need the form to select module/path,
! 4010: # at least for Netscape
! 4011: printf "CVS Root: <b>[%s]</b>",
! 4012: htmlquote($CVSROOTdescr{$cvstree} || $cvstree);
! 4013: }
! 4014:
! 4015: print <<EOF;
! 4016: <label for="mpath" accesskey="M">
! 4017: Module path or alias:
! 4018: <input type="text" id="mpath" name="path" value="" size="15" />
! 4019: </label>
! 4020: <input type="submit" value="Go" accesskey="O" />
! 4021: </p>
! 4022: </form>
! 4023: EOF
! 4024: }
! 4025:
! 4026:
! 4027: sub chooseMirror()
! 4028: {
! 4029: # This code comes from the original BSD-cvsweb
! 4030: # and may not be useful for your site; If you don't
! 4031: # set %MIRRORS this won't show up, anyway.
! 4032: scalar(%MIRRORS) or return;
! 4033:
! 4034: # Should perhaps exclude the current site somehow...
! 4035: print "\n<p>\nThis CVSweb is mirrored in\n";
! 4036:
! 4037: my @tmp = map(&link(htmlquote($_), $MIRRORS{$_}), sort keys %MIRRORS);
! 4038: my $tmp = pop (@tmp);
! 4039:
! 4040: if (scalar(@tmp)) {
! 4041: print join (', ', @tmp), ' and ';
! 4042: }
! 4043:
! 4044: print "$tmp.\n</p>\n";
! 4045: }
! 4046:
! 4047:
! 4048: sub fileSortCmp()
! 4049: {
! 4050: (my $af = $a) =~ s/,v$//;
! 4051: (my $bf = $b) =~ s/,v$//;
! 4052: my ($rev1, $date1, $log1, $author1, $filename1) = @{$fileinfo{$af}}
! 4053: if (defined($fileinfo{$af}));
! 4054: my ($rev2, $date2, $log2, $author2, $filename2) = @{$fileinfo{$bf}}
! 4055: if (defined($fileinfo{$bf}));
! 4056:
! 4057: my $comp = 0;
! 4058: if (defined($filename1) && defined($filename2) &&
! 4059: $af eq $filename1 && $bf eq $filename2)
! 4060: {
! 4061:
! 4062: # Two files
! 4063: $comp = -revcmp($rev1, $rev2) if ($byrev && $rev1 && $rev2);
! 4064: $comp = ($date2 <=> $date1) if ($bydate && $date1 && $date2);
! 4065: if ($input{ignorecase}) {
! 4066: $comp = (uc($log1) cmp uc($log2)) if ($bylog && $log1 && $log2);
! 4067: $comp = (uc($author1) cmp uc($author2)) if ($byauthor &&
! 4068: $author1 && $author2);
! 4069: } else {
! 4070: $comp = ($log1 cmp $log2) if ($bylog && $log1 && $log2);
! 4071: $comp = ($author1 cmp $author2) if ($byauthor &&
! 4072: $author1 && $author2);
! 4073: }
! 4074: }
! 4075:
! 4076: if ($comp == 0) {
! 4077:
! 4078: # Directories first, then files under version control,
! 4079: # then other, "rogue" files.
! 4080: # Sort by filename if no other criteria available.
! 4081:
! 4082: my $ad = (
! 4083: (-d "$fullname/$a")
! 4084: ? 'D'
! 4085: : (defined($fileinfo{$af}) ? 'F' : 'R')
! 4086: );
! 4087: my $bd = (
! 4088: (-d "$fullname/$b")
! 4089: ? 'D'
! 4090: : (defined($fileinfo{$bf}) ? 'F' : 'R')
! 4091: );
! 4092: (my $c = $a) =~ s|.*/||;
! 4093: (my $d = $b) =~ s|.*/||;
! 4094:
! 4095: my ($l, $r) = ("$ad$c", "$bd$d");
! 4096: $comp = $input{ignorecase} ? (uc($l) cmp uc($r)) : ($l cmp $r);
! 4097:
! 4098: # Parent dir is always first, then Attic.
! 4099: if ($comp != 0) {
! 4100: if ($l eq 'D..') {
! 4101: $comp = -1;
! 4102: } elsif ($r eq 'D..') {
! 4103: $comp = 1;
! 4104: } elsif ($l eq 'DAttic') {
! 4105: $comp = -1;
! 4106: } elsif ($r eq 'DAttic') {
! 4107: $comp = 1;
! 4108: }
! 4109: }
! 4110: }
! 4111: return $comp;
! 4112: }
! 4113:
! 4114: #
! 4115: # Returns a URL to download the selected revision.
! 4116: # Expects the passed in URL to be URI escaped, relative, and without a query
! 4117: # string.
! 4118: #
! 4119: sub download_url($$;$)
! 4120: {
! 4121: my ($url, $revision, $mimetype) = @_;
! 4122: my @dots = $revision =~ /\./g;
! 4123: $revision =~ s/\b0\.(?=\d+$)// if (scalar(@dots) & 1);
! 4124:
! 4125: if (!defined($mimetype) || $mimetype !~ CVSWEBMARKUP) {
! 4126: my $path = $where;
! 4127: $path =~ s|[^/]+$||;
! 4128: $url = "$scriptname/$CheckoutMagic/$path$url";
! 4129: }
! 4130: $url .= '?rev=' . uri_escape($revision);
! 4131: $url .= ';content-type=' . uri_escape($mimetype) if $mimetype;
! 4132:
! 4133: return $url;
! 4134: }
! 4135:
! 4136: #
! 4137: # Returns a link to download the selected revision.
! 4138: # Expects the passed in URL to be URI escaped, relative,
! 4139: # and without a query string.
! 4140: #
! 4141: sub download_link($$$;$)
! 4142: {
! 4143: my ($url, $revision, $textlink, $mimetype) = @_;
! 4144: return sprintf('<a href="%s" class="download-link">%s</a>',
! 4145: download_url($url, $revision, $mimetype) . $barequery,
! 4146: htmlquote($textlink));
! 4147: }
! 4148:
! 4149: #
! 4150: # Returns a URL to display the selected revision.
! 4151: # Expects the passed in URL to be URI escaped, and without a query string.
! 4152: #
! 4153: sub display_url($$;$)
! 4154: {
! 4155: my ($url, $revision, $mimetype) = @_;
! 4156: $url .= '?rev=' . uri_escape($revision);
! 4157: $url .= ';content-type=' . uri_escape($mimetype) if $mimetype;
! 4158: return $url;
! 4159: }
! 4160:
! 4161: #
! 4162: # Returns a link to display the selected revision.
! 4163: # Expects the passed in URL to be URI escaped, and without a query string.
! 4164: #
! 4165: sub display_link($$;$$)
! 4166: {
! 4167: my ($url, $revision, $textlink, $mtype) = @_;
! 4168: $textlink = $revision unless defined($textlink);
! 4169: return sprintf('<a href="%s" class="display-link">%s</a>',
! 4170: display_url($url, $revision, $mtype) . $barequery,
! 4171: htmlquote($textlink));
! 4172: }
! 4173:
! 4174: #
! 4175: # Expects the passed in URL to be URI escaped, and without a query string.
! 4176: # The passed in link text should be already HTML escaped as appropriate.
! 4177: #
! 4178: sub graph_link($;$)
! 4179: {
! 4180: my ($url, $text) = @_;
! 4181: $text ||= $graphicon;
! 4182: return sprintf('<a href="%s?graph=1%s">%s</a>', $url, $barequery, $text);
! 4183: }
! 4184:
! 4185: #
! 4186: # Returns a link to CVSHistory for the given directory and filename.
! 4187: #
! 4188: sub history_link($$;$)
! 4189: {
! 4190: my ($dir, $file, $text) = @_;
! 4191: $dir ||= '';
! 4192: $file ||= '';
! 4193: $text ||= 'History';
! 4194: return &link($text,
! 4195: sprintf('%s?cvsroot=%s;dsearch=%s;fsearch=%s;limit=1',
! 4196: $cvshistory_url, uri_escape($input{cvsroot} || ''),
! 4197: uri_escape($dir), uri_escape($file)));
1.45.2.46 knu 4198: }
4199:
4200: # Returns a Query string with the
4201: # specified parameter toggled
1.45.2.91! simon 4202: sub toggleQuery($;$)
! 4203: {
! 4204: my ($toggle, $value) = @_;
! 4205:
! 4206: my %vars = %input;
! 4207:
! 4208: if (defined($value)) {
! 4209: $vars{$toggle} = $value;
! 4210: } else {
! 4211: $vars{$toggle} = $vars{$toggle} ? 0 : 1;
! 4212: }
! 4213:
! 4214: # Build a new query of non-default paramenters
! 4215: my $newquery = "";
! 4216: foreach my $var (@stickyvars) {
! 4217: my ($value) = defined($vars{$var}) ? $vars{$var} : "";
! 4218: my ($default) = defined($DEFAULTVALUE{$var}) ? $DEFAULTVALUE{$var} : "";
! 4219:
! 4220: if ($value ne $default) {
! 4221: $newquery .= ';' if ($newquery ne "");
! 4222: $newquery .= uri_escape($var) . '=' . uri_escape($value);
! 4223: }
! 4224: }
! 4225:
! 4226: if ($newquery) {
! 4227: return '?' . $newquery;
! 4228: }
! 4229: return "";
! 4230: }
! 4231:
! 4232: sub htmlquote($)
! 4233: {
! 4234: local ($_) = @_;
! 4235: # Special Characters; RFC 1866
! 4236: s/&/&/g;
! 4237: s/\"/"/g;
! 4238: s/</</g;
! 4239: s/>/>/g;
! 4240: return $_;
! 4241: }
! 4242:
! 4243: sub htmlunquote($)
! 4244: {
! 4245: local ($_) = @_;
! 4246: # Special Characters; RFC 1866
! 4247: s/"/\"/g;
! 4248: s/</</g;
! 4249: s/>/>/g;
! 4250: s/&/&/g;
! 4251: return $_;
! 4252: }
! 4253:
! 4254: sub uri_escape_path($)
! 4255: {
! 4256: return join('/', map(uri_escape($_), split(m|/+|, shift, -1)));
! 4257: }
! 4258:
! 4259: sub http_header(;$$)
! 4260: {
! 4261: my ($content_type, $moddate) = @_;
! 4262: $content_type ||= 'text/html';
! 4263:
! 4264: $content_type .= "; charset=$charset"
! 4265: if ($charset && $content_type =~ m,^text/,);
! 4266:
! 4267: # Note that in the following, we explicitly join() and concatenate the
! 4268: # headers instead of printing them as an array. This is because some
! 4269: # systems, eg. early versions of mod_perl 2 don't quite get it if the
! 4270: # last \r\n\r\n isn't included in the last "payload" header print().
! 4271:
! 4272: my @headers = ();
! 4273: # TODO: ctime(3) from scalar gmtime() isn't HTTP compliant, see HTTP::Date.
! 4274: push(@headers, 'Last-Modified: ' . scalar gmtime($moddate) . ' GMT')
! 4275: if $moddate;
! 4276: push(@headers, 'Content-Type: ' . $content_type);
! 4277:
! 4278: if ($allow_compress && $maycompress) {
! 4279: if (HAS_ZLIB
! 4280: || (defined($CMD{gzip}) && open(GZIP, "| $CMD{gzip} -1 -c")))
! 4281: {
! 4282:
! 4283: push(@headers, 'Content-Encoding: x-gzip');
! 4284: push(@headers, 'Vary: Accept-Encoding'); # RFC 2616, 14.44
! 4285: print join("\r\n", @headers) . "\r\n\r\n";
! 4286:
! 4287: $| = 1;
! 4288: $| = 0; # Flush header output.
! 4289:
! 4290: tie(*GZIP, __PACKAGE__, \*STDOUT) if HAS_ZLIB;
! 4291: select(GZIP);
! 4292: $gzip_open = 1;
! 4293:
! 4294: } else {
! 4295:
! 4296: print join("\r\n", @headers) . "\r\n\r\n";
! 4297: printf
! 4298: '<span style="font-size: smaller">Unable to find gzip binary in the <b>$command_path</b> (<code>%s</code>) to compress output</span><br />',
! 4299: htmlquote(join(':', @command_path));
! 4300: }
! 4301:
! 4302: } else {
! 4303: print join("\r\n", @headers) . "\r\n\r\n";
! 4304: }
! 4305: }
! 4306:
! 4307:
! 4308: sub html_header($;$)
! 4309: {
! 4310: my ($title, $moddate) = @_;
! 4311: $title = htmlquote($title);
! 4312: my $css = $CSS || '';
! 4313: http_header('text/html', $moddate);
! 4314:
! 4315: (my $header = &cgi_style::html_header($title, 0)) =~ s,\A.*<head>,<head>\n$HTML_META,s;
! 4316: $header .= $css;
! 4317: print $header;
! 4318: }
! 4319:
! 4320: sub html_footer()
! 4321: {
! 4322: print &cgi_style::html_footer;
! 4323: }
! 4324:
! 4325: sub link_tags($)
! 4326: {
! 4327: my ($tags) = @_;
! 4328:
! 4329: (my $filename = $where) =~ s|^.*/||;
! 4330: my $fileurl = './' . uri_escape($filename);
! 4331:
! 4332: my $ret = "";
! 4333: foreach my $sym (split(", ", $tags)) {
! 4334: $ret .= ",\n" if ($ret ne "");
! 4335: $ret .= &link(htmlquote($sym),
! 4336: $fileurl . toggleQuery('only_with_tag', $sym));
! 4337: }
! 4338: return $ret;
! 4339: }
! 4340:
! 4341:
! 4342: #
! 4343: # See if a file/dir is listed in the config file's @ForbiddenFiles list.
! 4344: # Takes a full file system path or one relative to $cvsroot, and strips the
! 4345: # trailing ",v" if present, then compares. Returns 1 if forbidden, else 0.
! 4346: #
! 4347: sub forbidden($)
! 4348: {
! 4349: (my $path = canonpath(shift)) =~ s/,v$//;
! 4350: $path =~ s|^$cvsroot/+||;
! 4351: for my $forbidden_re (@ForbiddenFiles) {
! 4352: return 1 if ($path =~ $forbidden_re);
! 4353: }
! 4354: return 0;
! 4355: }
! 4356:
! 4357:
! 4358: #
! 4359: # Starts a process using IPC::Run. All arguments are passed to
! 4360: # IPC::Run::start() as-is. Returns an array ($harness, $error) where
! 4361: # $harness is from IPC::Run if start() succeeds, undef otherwise. In case
! 4362: # of an error, $error contains the error message.
! 4363: #
! 4364: sub startproc(@)
! 4365: {
! 4366: my $h = my $err = undef;
! 4367: eval {
! 4368: local $SIG{__DIE__};
! 4369: $h = IPC::Run::start(@_) or die("return code: $?");
! 4370: };
! 4371: if ($@) {
! 4372: $h->finish() if $h;
! 4373: $h = undef;
! 4374: $err = "'@{$_[0]}' failed: $@";
! 4375: }
! 4376: return ($h, $err);
! 4377: }
! 4378:
! 4379: #
! 4380: # Runs a process using IPC::Run. All arguments are passed to
! 4381: # IPC::Run::run() as-is. Returns an array ($exitcode, $errormsg).
! 4382: #
! 4383: sub runproc(@)
! 4384: {
! 4385: eval {
! 4386: local $SIG{__DIE__};
! 4387: IPC::Run::run(@_);
! 4388: };
! 4389: my $exitcode = $? >> 8;
! 4390: my $errormsg = undef;
! 4391: if ($@) {
! 4392: $exitcode ||= -1;
! 4393: $errormsg = "'@{$_[0]}' failed: $@";
! 4394: }
! 4395: return ($exitcode, $errormsg);
! 4396: }
! 4397:
! 4398: #
! 4399: # Check out a file to a temporary file.
! 4400: #
! 4401: sub checkout_to_temp($$$)
! 4402: {
! 4403: my ($cvsroot, $cvsname, $rev) = @_;
! 4404:
! 4405: # Pipe given cvs file into a temporary place.
! 4406: my ($temp_fh, $temp_fn) = tempfile('.cvsweb.XXXXXXXX', DIR => tmpdir());
! 4407:
! 4408: my @cmd = ($CMD{cvs}, @cvs_options, '-Qd', $cvsroot,
! 4409: 'co', '-p', "-r$rev", $cvsname);
! 4410:
! 4411: local (*DIFF_OUT);
! 4412: my ($h, $err) = startproc(\@cmd, \"", '>pipe', \*DIFF_OUT);
! 4413: if ($h) {
! 4414: local $/ = undef;
! 4415: print $temp_fh <DIFF_OUT>;
! 4416: $h->finish();
! 4417: close($temp_fh);
! 4418: } else {
! 4419: close($temp_fh);
! 4420: unlink($temp_fn);
! 4421: fatal('500 Internal Error',
! 4422: 'Checkout failure (exit status %s), output: <pre>%s</pre>',
! 4423: $? >> 8 || -1, $err);
! 4424: }
! 4425:
! 4426: return $temp_fn;
! 4427: }
! 4428:
! 4429: #
! 4430: # Close the GZIP handle, and remove the tie.
! 4431: #
! 4432: sub gzipclose
! 4433: {
! 4434: if ($gzip_open) {
! 4435: select(STDOUT);
! 4436: close(GZIP);
! 4437: untie *GZIP;
! 4438: $gzip_open = 0;
! 4439: }
1.45.2.51 knu 4440: }
4441:
4442: # implement a gzipped file handle via the Compress:Zlib compression
4443: # library.
4444:
4445: sub MAGIC1() { 0x1f }
4446: sub MAGIC2() { 0x8b }
1.45.2.75 knu 4447: sub OSCODE() { 3 }
1.45.2.51 knu 4448:
1.45.2.91! simon 4449: sub TIEHANDLE
! 4450: {
! 4451: my ($class, $out) = @_;
! 4452: my ($d) = Compress::Zlib::deflateInit(
! 4453: -Level => Compress::Zlib::Z_BEST_COMPRESSION(),
! 4454: -WindowBits => -Compress::Zlib::MAX_WBITS()
! 4455: )
! 4456: or return undef;
! 4457: my ($o) = { handle => $out,
! 4458: dh => $d,
! 4459: crc => 0,
! 4460: len => 0,
! 4461: };
! 4462: my ($header) = pack("c10",
! 4463: MAGIC1, MAGIC2, Compress::Zlib::Z_DEFLATED(),
! 4464: 0, 0, 0, 0, 0, 0, OSCODE);
! 4465: print {$o->{handle}} $header;
! 4466: return bless($o, $class);
1.1 jfieber 4467: }
1.45.2.91! simon 4468:
! 4469: sub PRINT
! 4470: {
! 4471: my ($o) = shift;
! 4472: my ($buf) = join (defined($,) ? $, : "", @_);
! 4473: my ($len) = length($buf);
! 4474: my ($compressed, $status) = $o->{dh}->deflate($buf);
! 4475: print {$o->{handle}} $compressed if defined($compressed);
! 4476: $o->{crc} = Compress::Zlib::crc32($buf, $o->{crc});
! 4477: $o->{len} += $len;
! 4478: return $len;
! 4479: }
! 4480:
! 4481: sub PRINTF
! 4482: {
! 4483: my ($o) = shift;
! 4484: my ($fmt) = shift;
! 4485: my ($buf) = sprintf($fmt, @_);
! 4486: my ($len) = length($buf);
! 4487: my ($compressed, $status) = $o->{dh}->deflate($buf);
! 4488: print {$o->{handle}} $compressed if defined($compressed);
! 4489: $o->{crc} = Compress::Zlib::crc32($buf, $o->{crc});
! 4490: $o->{len} += $len;
! 4491: return $len;
! 4492: }
! 4493:
! 4494: sub WRITE
! 4495: {
! 4496: my ($o, $buf, $len, $off) = @_;
! 4497: my ($compressed, $status) = $o->{dh}->deflate(substr($buf, 0, $len));
! 4498: print {$o->{handle}} $compressed if defined($compressed);
! 4499: $o->{crc} = Compress::Zlib::crc32(substr($buf, 0, $len), $o->{crc});
! 4500: $o->{len} += $len;
! 4501: return $len;
! 4502: }
! 4503:
! 4504: sub CLOSE
! 4505: {
! 4506: my ($o) = @_;
! 4507: return if !defined($o->{dh});
! 4508: my ($buf) = $o->{dh}->flush();
! 4509: $buf .= pack("V V", $o->{crc}, $o->{len});
! 4510: print {$o->{handle}} $buf;
! 4511: undef $o->{dh};
! 4512: }
! 4513:
! 4514: sub DESTROY
! 4515: {
! 4516: my ($o) = @_;
! 4517: CLOSE($o);
! 4518: }
! 4519:
! 4520: # Local variables:
! 4521: # indent-tabs-mode: nil
! 4522: # cperl-indent-level: 2
! 4523: # End:
CVSweb