=================================================================== RCS file: /cvs/mandoc/Attic/index.sgml,v retrieving revision 1.129 retrieving revision 1.161 diff -u -p -r1.129 -r1.161 --- mandoc/Attic/index.sgml 2011/07/23 09:47:25 1.129 +++ mandoc/Attic/index.sgml 2013/10/06 17:34:30 1.161 @@ -3,12 +3,17 @@ - mdocml | mdoc macro compiler + mdocml | UNIX manpage compiler

- mdocml – mdoc macro compiler + mdocml – UNIX manpage compiler, current version @VERSION@ (@VDATE@)

+

+ Sources: current, + cvsweb + (archives) +

Description

@@ -20,7 +25,7 @@ pages whilst providing token support for man.

- Why? groff amounts to over 5 MB of source code, most of which is C++ and all of which is GPL. It runs slowly, produces + Why? groff amounts to over 5 MB of source code, most of which is C++ and GPL version 3. It runs slowly, produces uncertain output, and varies in operation from system to system. mdocml strives to fix this (respectively small, C, ISC-licensed, fast and regular).

@@ -28,111 +33,98 @@ mdocml consists of the libmandoc validating compiler and mandoc, which interfaces with the compiler library to format output for UNIX terminals (with support for wide-character locales), XHTML, HTML, PostScript, and PDF. - It also includes preconv, for recoding multibyte manuals; and mandocdb, for indexing manuals. + It also includes preconv for recoding multibyte manuals, + demandoc for emitting only text parts of manuals, + mandocdb for indexing manuals, + apropos (includes whatis mode) for indexed manual search, and + man.cgi for indexed manual search online. It is a BSD.lv project.

Disambiguation: mdocml is often referred to by its installed binary, mandoc.

-

+

Sources -

+

- mdocml is in plain-old ANSI C and should build and run on any UNIX system, although mandocdb requires Berkeley Database (this is - installed by default on all BSD operating systems). - To compile mdocml, run make, then make install to install into - /usr/local. - Be aware: if you have an existing groff installation, - this may overwrite its preconv binary. - The mandocdb utility is not yet linked to the build. You must run make - mandocdb to build it (it does not install). + mdocml is in ISO C99 and should build and run on any modern system; however, you'll need sqlite3 to build apropos (links to whatis), + man.cgi, and mandocdb. + To build and install into /usr/local/, just run make install. + Be careful: the preconv, apropos, and whatis binary names are usually taken by existing utilities.

-

- The most current version of mdocml is @VERSION@, dated @VDATE@. -

- Current + Downstream

- +

+ Several systems come bundled with mdocml utilities. + If your system does not appear below, the maintainers have not contacted me and it should not be considered + official. + Please contact us if you plan on maintaining a downstream version! +

+
- + - + - -
Source archiveDragonFly BSD - /snapshots/mdocml.tar.gz - (md5) + contrib/mdocml (1.12.2 sources) + lib/libmandoc + usr.bin/mandoc (build system)
Online sourceFreeBSD 10.0, -CURRENT - cvsweb + contrib/mdocml (1.12.1 sources) + usr.bin/mandoc (build system)
-

- Downstream -

- - - - - + - + - + - + - -
DragonFly BSDFreeBSD 9.x, 8.x - usr.bin/mandoc + ports/textproc/mdocml (1.12.1 port)
FreeBSDNetBSD - ports/textproc/mdocml + src/external/bsd/mdocml (1.12.1 sources plus patches and build system)
NetBSDOpenBSD - src/external/bsd/mdocml + src/usr.bin/mandoc (1.12.2 sources and build system)
OpenBSDpkgsrc - src/usr.bin/mandoc + textproc/mdocml (1.12.2 port)
-

- Historical -

- - - - - + + + + +
Source archiveMinix3 - /snapshots/ + external/bsd/mdocml (1.10.9 sources and build system)
Alpine Linux + aports/main/mdocml (1.12.1 port) +

Documentation

- These manuals are generated automatically and refer to the current snapshot. + These manuals are generated automatically and refer to the current release. + They are the authoritative documentation for the mdocml system.

@@ -140,136 +132,100 @@ - + - + + + + + - + + + + + + + + + + + + +
mandoc(1)apropos(1) - format and display UNIX manuals - - (text | - xhtml | - pdf | - postscript) - + search the manual page database
mandocdb(8)demandoc(1) - index UNIX manuals - - (text | - xhtml | - pdf | - postscript) - + emit only text of UNIX manuals
mandoc(1) + format and display UNIX manuals +
preconv(1) recode multibyte UNIX manuals - - (text | - xhtml | - pdf | - postscript) -
mandoc(3) mandoc macro compiler library - - (text | - xhtml | - pdf | - postscript) -
man(7)tbl(3) - man language reference - - (text | - xhtml | - pdf | - postscript) - + roff table parser library for mandoc
eqn(7) eqn-mandoc language reference - - (text | - xhtml | - pdf | - postscript) -
man(7) + man language reference +
man.cgi(7) + cgi for manpage query and display +
mandoc_char(7) mandoc special characters - - (text | - xhtml | - pdf | - postscript) -
mdoc(7) mdoc language reference - - (text | - xhtml | - pdf | - postscript) -
roff(7) roff-mandoc language reference - - (text | - xhtml | - pdf | - postscript) -
tbl(7) tbl-mandoc language reference - - (text | - xhtml | - pdf | - postscript) -
mandocdb(8) + index UNIX manuals +

Contact

- Use the mailing lists for bug-reports, patches, questions, etc. (these require subscription). Please check the + Use the mailing lists for bug-reports, patches, questions, etc. Please check the TODO for known issues - before posting. Beyond that, contact Kristaps at kris...@bsd.lv. + before posting. All lists are subscription-only: send a blank e-mail to the listed address to subscribe. Beyond that, + contact Kristaps at kris...@bsd.lv. Archives are available at Gmane.

@@ -282,7 +238,6 @@ @@ -292,7 +247,6 @@ @@ -302,7 +256,6 @@ @@ -311,52 +264,84 @@ News

- xx-07-2011: version 1.11.5 + xx-xx-2013: version 1.13.0

- Significant eqn improvements. mdocml can now parse arbitrary equations - (although few GNU troff extensions are accepted, nor is mixing low-level roff with eqn). See the eqn manual for details. For the time being, equations are rendered as simple in-line text. + The mandocdb tools (mandocdb, apropos (absorbing whatis), and man.cgi) have been re-written to + use sqlite3 as a database.

- 12-07-2011: version 1.11.4 + 05-10-2013: version 1.12.2

- Bug-fixes and clean-ups across all systems, especially in mandocdb makewhatis (note: still not - connected to the general build and must be compiled with make mandocdb make makewhatis) and the man parser. This release was significantly assisted by participants in OpenBSD's c2k11. Thanks! + The mdoc(7) to man(7) converter, + to be called as mandoc -Tman, is now fully functional.

-

- 26-05-2011: version 1.11.3 +

+ The mandoc(1) utility now supports the -Ios (default operating system) + input option, and the -Tutf8 output mode now actually works.

- Introduce locale-encoding of output with the -Tlocale output option and Unicode escaped-character input. - See mandoc and mandoc_char, respectively, for details. - This allows for non-ASCII characters (e.g., \[u5000]) to be rendered in the locale's encoding, if said - environment supports wide-character encoding (if it does not, -Tascii is used instead). - Locale support can be turned off at compile time by removing -DUSE_WCHAR in the Makefile, in which case - -Tlocale is always a synonym for -Tascii. + The mandocdb(8) utility no longer truncates existing databases when starting to build new ones, + but only replaces them when the build actually succeeds.

- Furthermore, multibyte-encoded documents, such as those in UTF-8, may be on-the-fly recoded into mandoc input by using the newly-added preconv utility. - Note: in the future, this feature may be integrated into mandoc. + The man(7) parser now supports the PD macro (paragraph distance), + and (for GNU man-ext compatibility only) EX (example block) and EE (example end). + Plus several bugfixes regarding indentation, line breaks, and vertical spacing, + and regarding RS following TP.

+

+ The roff(7) parser now supports the \f(BI (bold+italic) font escape, + the \z (zero cursor advance) escape and the cc (change control character) + and it (input line trap) requests. + Plus bugfixes regarding the \t (tab) escape, nested escape sequences, and conditional requests. +

+

+ In mdoc(7), several bugs were fixed related to UTF-8 output of quoting enclosures, + delimiter handling, list indentation and horizontal and vertical spacing, + formatting of the Lk, %U, and %C macros, + plus some bugfixes related to the handling of syntax errors like badly nested font blocks, + stray Ta macros outside column lists, unterminated It Xo blocks, + and non-text children of Nm blocks. +

+

+ In tbl(7), the width of horizontal spans and the vertical spacing around tables was corrected, + and in man(7) files, a crash was fixed that was triggered by some particular unclosed T{ macros. +

+

+ For mandoc developers, we now provide a tbl(3) library manual and gmdiff, + a very small, very simplistic groff-versus-mandoc output comparison tool. +

+

+ See NEWS for historical notes. +

- 12-05-2011: version 1.11.2 + 23-03-2012: version 1.12.1

- Corrected some installation issues in version 1.11.1. - Further migration to libmandoc. - Initial public release (this utility is very much under development) of mandocdbmakewhatis, - initially named mandoc-db. - This utility produces keyword databases of manual content - mandoc-cgi, - mandoc-tools, - which features semantic querying of manual content. + Significant work on apropos and mandocdb. These tools are + now much more robust. + A whatis implementation is now handled as an apropos mode. + These tools are also able to minimally handle pre-formatted pages, that is, those already formatted by another utility + such as GNU troff.

+ The man.cgi script is also now available for wider testing. It interfaces with mandocdb manuals cached by catman. HTML output is generated + on-the-fly by libmandoc or internal methods to convert pre-formatted pages. +

+

+ The mailing list archive for the discuss and tech lists are being hosted by Gmane at gmane.comp.tools.mdocml.user and gmane.comp.tools.mdocml.devel, respectively. +

+

+ Lastly, I'm no longer providing binaries, as nobody has asked for them. +

+

See cvsweb for historical notes.

@@ -364,7 +349,8 @@ Copyright © 2008–2011 Kristaps Dzonsons, - $Date: 2011/07/23 09:47:25 $ + © 2013 Ingo Schwarze, + $Date: 2013/10/06 17:34:30 $

bug-reports, general questions, and announcements - (archive)
patches and system discussions - (archive)
source commit messages - (archive)