version 1.138, 2012/07/18 10:39:19 |
version 1.196, 2014/12/17 20:31:19 |
|
|
* $Id$ |
* $Id$ |
************************************************************************ |
************************************************************************ |
|
|
|
Many issues are annotated for difficulty as follows: |
|
|
|
- loc = locality of the issue |
|
* single file issue, affects file only, or very few |
|
** single module issue, affects several files of one module |
|
*** cross-module issue, significantly impacts multiple modules |
|
and may require substantial changes to internal interfaces |
|
- exist = difficulty of the existing code in this area |
|
* affected code is straightforward and easy to read and change |
|
** affected code is somewhat complex, but once you understand |
|
the design, not particularly difficult to understand |
|
*** affected code uses a special, exceptionally tricky design |
|
- algo = difficulty of the new algorithm to be written |
|
* the required logic and code is straightforward |
|
** the required logic is somewhat complex and needs a careful design |
|
*** the required logic is exceptionally tricky, |
|
maybe an approach to solve that is not even known yet |
|
- size = the amount of code to be written or changed |
|
* a small number of lines (at most 100, usually much less) |
|
** a considerable amount of code (several dozen to a few hundred) |
|
*** a large amount of code (many hundreds, maybe thousands) |
|
- imp = importance of the issue |
|
* mostly for completeness |
|
** would be nice to have |
|
*** issue causes considerable inconvenience |
|
|
|
Obviously, as the issues have not been solved yet, these annotations |
|
are mere guesses, and some may be wrong. |
|
|
************************************************************************ |
************************************************************************ |
|
* crashes |
|
************************************************************************ |
|
|
|
- The abort() in bufcat(), html.c, can be triggered via buffmt_includes() |
|
by running -Thtml -Oincludes on a file containing a long .In argument. |
|
Fixing this will probably require reworking the whole bufcat() concept. |
|
loc ** exist * algo * size ** imp ** |
|
|
|
************************************************************************ |
* missing features |
* missing features |
************************************************************************ |
************************************************************************ |
|
|
--- missing roff features ---------------------------------------------- |
--- missing roff features ---------------------------------------------- |
|
|
- roff.c should treat \n(.H>23 and \n(.V>19 in the pod2man(1) |
|
preamble as true, see for example AUTHORS in MooseX::Getopt.3p |
|
reported by Andreas Voegele <mail at andreasvoegele dot com> |
|
Tue, 22 Nov 2011 15:34:47 +0100 on ports@ |
|
|
|
- .ad (adjust margins) |
- .ad (adjust margins) |
.ad l -- adjust left margin only (flush left) |
.ad l -- adjust left margin only (flush left) |
.ad r -- adjust right margin only (flush right) |
.ad r -- adjust right margin only (flush right) |
|
|
.na -- temporarily disable adjustment without changing the mode |
.na -- temporarily disable adjustment without changing the mode |
.ad -- re-enable adjustment without changing the mode |
.ad -- re-enable adjustment without changing the mode |
Adjustment mode is ignored while in no-fill mode (.nf). |
Adjustment mode is ignored while in no-fill mode (.nf). |
|
loc *** exist *** algo ** size ** imp ** (parser reorg would help) |
|
|
- .it (line traps) occur in mysql(1), yasm_arch(7) |
- .fc (field control) |
generated by DocBook XSL Stylesheets v1.71.1 <http://docbook.sf.net/> |
found by naddy@ in xloadimage(1) |
reported by brad@ Sat, 15 Jan 2011 15:48:18 -0500 |
loc ** exist *** algo * size * imp * |
|
|
|
- .nr third argument (auto-increment step size, requires \n+) |
|
found by bentley@ in sbcl(1) Mon, 9 Dec 2013 18:36:57 -0700 |
|
loc * exist * algo * size * imp ** |
|
|
- .ns (no-space mode) occurs in xine-config(1) |
- .ns (no-space mode) occurs in xine-config(1) |
reported by brad@ Sat, 15 Jan 2011 15:45:23 -0500 |
reported by brad@ Sat, 15 Jan 2011 15:45:23 -0500 |
|
loc *** exist *** algo *** size ** imp * |
|
|
- xloadimage(1) wants .ti (temporary indent), rep by naddy@ |
|
reported again by bentley@ in nmh(1) Mon, 23 Apr 2012 13:38:28 -0600 |
|
also uses .ce (center N lines) and .fc (field control) |
|
|
|
- .ta (tab settings) occurs in ircbug(1) and probably gnats(1) |
- .ta (tab settings) occurs in ircbug(1) and probably gnats(1) |
reported by brad@ Sat, 15 Jan 2011 15:50:51 -0500 |
reported by brad@ Sat, 15 Jan 2011 15:50:51 -0500 |
|
also Tcl_NewStringObj(3) via wiz@ Wed, 5 Mar 2014 22:27:43 +0100 |
|
also posix2time(3) Carsten Kunze Mon, 1 Dec 2014 13:03:10 +0100 |
|
loc ** exist *** algo ** size ** imp *** |
|
|
- \c (interrupted text) should prevent the line break |
- .ti (temporary indent) |
even inside .Bd literal; that occurs in chat(8) |
found by naddy@ in xloadimage(1) |
|
found by bentley@ in nmh(1) Mon, 23 Apr 2012 13:38:28 -0600 |
|
loc ** exist ** algo ** size * imp ** (parser reorg helps a lot) |
|
|
|
- .while and .shift |
|
found by jca@ in ratpoison(1) Sun, 30 Jun 2013 12:01:09 +0200 |
|
loc * exist ** algo ** size ** imp ** |
|
|
|
- \h horizontal move |
|
found in cclive(1) and nasm(1) asciidoc/DocBook output |
|
bentley@ on discuss@ Sat, 21 Sep 2013 22:29:34 -0600 |
|
naddy@ Thu, 4 Dec 2014 16:26:41 +0100 |
|
loc ** exist ** algo ** size * imp ** (parser reorg helps a lot) |
|
|
|
- \n+ and \n- numerical register increment and decrement |
|
found by bentley@ in sbcl(1) Mon, 9 Dec 2013 18:36:57 -0700 |
|
loc * exist * algo * size * imp ** |
|
|
|
- \w'' improve width measurements |
|
would not be very useful without an expression parser, see below |
|
needed for Tcl_NewStringObj(3) via wiz@ Wed, 5 Mar 2014 22:27:43 +0100 |
|
loc ** exist *** algo *** size * imp *** |
|
|
- using undefined strings or macros defines them to be empty |
- using undefined strings or macros defines them to be empty |
wl@ Mon, 14 Nov 2011 14:37:01 +0000 |
wl@ Mon, 14 Nov 2011 14:37:01 +0000 |
|
loc * exist * algo * size * imp * |
|
|
--- missing mdoc features ---------------------------------------------- |
--- missing mdoc features ---------------------------------------------- |
|
|
- fix bad block nesting involving multiple identical explicit blocks |
- fix bad block nesting involving multiple identical explicit blocks |
see the OpenBSD mdoc_macro.c 1.47 commit message |
see the OpenBSD mdoc_macro.c 1.47 commit message |
|
loc * exist *** algo *** size * imp ** |
|
|
- .Bl -column .Xo support is missing |
- .Bl -column .Xo support is missing |
ultimate goal: |
ultimate goal: |
|
|
lib/libc/compat-43/sigvec.3 |
lib/libc/compat-43/sigvec.3 |
lib/libc/gen/signal.3 |
lib/libc/gen/signal.3 |
lib/libc/sys/sigaction.2 |
lib/libc/sys/sigaction.2 |
|
loc * exist *** algo *** size * imp ** |
|
|
- edge case: decide how to deal with blk_full bad nesting, e.g. |
- edge case: decide how to deal with blk_full bad nesting, e.g. |
.Sh .Nm .Bk .Nm .Ek .Sh found by jmc@ in ssh-keygen(1) |
.Sh .Nm .Bk .Nm .Ek .Sh found by jmc@ in ssh-keygen(1) |
from jmc@ Wed, 14 Jul 2010 18:10:32 +0100 |
from jmc@ Wed, 14 Jul 2010 18:10:32 +0100 |
|
loc * exist *** algo *** size ** imp ** |
|
|
- \\ is now implemented correctly |
- .Bd -centered implies -filled, not -unfilled, which is not |
* when defining strings and macros using .ds and .de |
easy to implement; it requires code similar to .ce, which |
* when parsing roff(7) and man(7) macro arguments |
we don't have either. |
It does not yet work in mdoc(7) macro arguments |
Besides, groff has bug causing text right *before* .Bd -centered |
because libmdoc does not yet use mandoc_getarg(). |
to be centered as well. |
Also check what happens in plain text, it must be identical to \e. |
loc *** exist *** algo ** size ** imp ** (parser reorg would help) |
|
|
- .Bd -filled should not be the same as .Bd -ragged, but align both |
- .Bd -filled should not be the same as .Bd -ragged, but align both |
the left and right margin. In groff, it is implemented in terms |
the left and right margin. In groff, it is implemented in terms |
of .ad b, which we don't have either. Found in cksum(1). |
of .ad b, which we don't have either. Found in cksum(1). |
|
loc *** exist *** algo ** size ** imp ** (parser reorg would help) |
|
|
- implement blank `Bl -column', such as |
- implement blank `Bl -column', such as |
.Bl -column |
.Bl -column |
.It foo Ta bar |
.It foo Ta bar |
.El |
.El |
|
loc * exist *** algo *** size * imp * |
|
|
- explicitly disallow nested `Bl -column', which would clobber internal |
- explicitly disallow nested `Bl -column', which would clobber internal |
flags defined for struct mdoc_macro |
flags defined for struct mdoc_macro |
|
loc * exist * algo * size * imp ** |
|
|
- In .Bl -column .It, the end of the line probably has to be regarded |
- In .Bl -column .It, the end of the line probably has to be regarded |
as an implicit .Ta, if there could be one, see the following mildly |
as an implicit .Ta, if there could be one, see the following mildly |
|
|
Default search path. |
Default search path. |
reported by Michal Mazurek <akfaew at jasminek dot net> |
reported by Michal Mazurek <akfaew at jasminek dot net> |
via jmc@ Thu, 7 Apr 2011 16:00:53 +0059 |
via jmc@ Thu, 7 Apr 2011 16:00:53 +0059 |
|
loc * exist *** algo ** size * imp ** |
|
|
- inside `.Bl -column' phrases, punctuation is handled like normal |
- inside `.Bl -column' phrases, punctuation is handled like normal |
text, e.g. `.Bl -column .It Fl x . Ta ...' should give "-x -." |
text, e.g. `.Bl -column .It Fl x . Ta ...' should give "-x -." |
|
|
is not safe, e.g. `.Bl -column .It Pf a b .' gives "ab." |
is not safe, e.g. `.Bl -column .It Pf a b .' gives "ab." |
but should give "ab ." |
but should give "ab ." |
|
|
- set a meaningful default if no `Bl' list type is assigned |
- check whether it is correct that `D1' uses INDENT+1; |
|
does it need its own constant? |
|
loc * exist ** algo ** size * imp ** |
|
|
- have a blank `It' head for `Bl -tag' not puke |
|
|
|
- prohibit `Nm' from having non-text HEAD children |
- prohibit `Nm' from having non-text HEAD children |
(e.g., NetBSD mDNSShared/dns-sd.1) |
(e.g., NetBSD mDNSShared/dns-sd.1) |
(mdoc_html.c and mdoc_term.c `Nm' handlers can be slightly simplified) |
(mdoc_html.c and mdoc_term.c `Nm' handlers can be slightly simplified) |
|
|
|
- support translated section names |
|
e.g. x11/scrotwm scrotwm_es.1:21:2: error: NAME section must be first |
|
that one uses NOMBRE because it is spanish... |
|
deraadt tends to think that section-dependent macro behaviour |
|
is a bad idea in the first place, so this may be irrelevant |
|
loc ** exist ** algo ** size * imp ** |
|
|
- When there is free text in the SYNOPSIS and that free text contains |
- When there is free text in the SYNOPSIS and that free text contains |
the .Nm macro, groff somehow understands to treat the .Nm as an in-line |
the .Nm macro, groff somehow understands to treat the .Nm as an in-line |
macro, while mandoc treats it as a block macro and breaks the line. |
macro, while mandoc treats it as a block macro and breaks the line. |
|
|
should be, needs investigation. |
should be, needs investigation. |
uqs@ Thu, 2 Jun 2011 11:03:51 +0200 |
uqs@ Thu, 2 Jun 2011 11:03:51 +0200 |
uqs@ Thu, 2 Jun 2011 11:33:35 +0200 |
uqs@ Thu, 2 Jun 2011 11:33:35 +0200 |
|
loc * exist ** algo *** size * imp ** |
|
|
--- missing man features ----------------------------------------------- |
--- missing man features ----------------------------------------------- |
|
|
- groff an-ext.tmac macros (.UR, .UE) occur in xine(5) |
|
reported by brad@ Sat, 15 Jan 2011 15:45:23 -0500 |
|
|
|
- -T[x]html doesn't stipulate non-collapsing spaces in literal mode |
- -T[x]html doesn't stipulate non-collapsing spaces in literal mode |
|
|
--- missing tbl features ----------------------------------------------- |
--- missing tbl features ----------------------------------------------- |
|
|
- implement basic non-parametric .de to support e.g. sox(1) |
- look at the POSIX manuals in the books/man-pages-posix port, |
reported by naddy@ Sat, 16 Oct 2010 23:51:57 +0200 |
they use some unsupported tbl(7) features. |
*** sox(1) still doesn't work, tbl(1) errors need investigation |
loc * exist ** algo ** size ** imp *** |
|
|
|
- use Unicode U+2500 to U+256C for table borders |
|
in tbl(7) -Tutf-8 output |
|
suggested by bentley@ Tue, 14 Oct 2014 04:10:55 -0600 |
|
loc * exist ** algo * size * imp ** |
|
|
- allow standalone `.' to be interpreted as an end-of-layout |
- allow standalone `.' to be interpreted as an end-of-layout |
delimiter instead of being thrown away as a no-op roff line |
delimiter instead of being thrown away as a no-op roff line |
reported by Yuri Pankov, Wed 18 May 2011 11:34:59 CEST |
reported by Yuri Pankov, Wed 18 May 2011 11:34:59 CEST |
|
loc ** exist ** algo ** size * imp ** |
|
|
|
--- missing eqn features ----------------------------------------------- |
|
|
|
- The "size" keyword is parsed, but ignored by the formatter. |
|
loc * exist * algo * size * imp * |
|
|
|
- The spacing characters `~', `^', and tab are currently ignored, |
|
see User's Guide (Second Edition) page 2 section 4. |
|
loc * exist * algo ** size * imp ** |
|
|
|
- Mark and lineup are parsed and ignored, |
|
see User's Guide (Second Edition) page 5 section 15. |
|
loc ** exist ** algo ** size ** imp ** |
|
|
--- missing misc features ---------------------------------------------- |
--- missing misc features ---------------------------------------------- |
|
|
|
- italic correction (\/) in PostScript mode |
|
Werner LEMBERG on groff at gnu dot org Sun, 10 Nov 2013 12:47:46 |
|
loc ** exist ** algo * size * imp * |
|
|
|
- When makewhatis(8) encounters a FATAL parse error, |
|
it silently treats the file as formatted, which makes no sense |
|
at all for paths like man1/foo.1 - and which also contradicts |
|
what the manual says at the end of the description. |
|
The end result will be ENOENT for file names returned |
|
by mansearch() in manpage.file. |
|
loc * exist * algo * size * imp ** |
|
|
|
- makewhatis(8) for preformatted pages: |
|
parse the section number from the header line |
|
and compare to the section number from the directory name |
|
loc * exist * algo * size * imp ** |
|
|
|
- Does makewhatis(8) detect missing NAME sections, missing names, |
|
and missing descriptions in all the file formats? |
|
loc * exist * algo * size * imp *** |
|
|
- clean up escape sequence handling, creating three classes: |
- clean up escape sequence handling, creating three classes: |
(1) fully implemented, or parsed and ignored without loss of content |
(1) fully implemented, or parsed and ignored without loss of content |
(2) unimplemented, potentially causing loss of content |
(2) unimplemented, potentially causing loss of content |
or serious mangling of formatting (e.g. \n) -> ERROR |
or serious mangling of formatting (e.g. \n) -> ERROR |
see textproc/mgdiff(1) for nice examples |
see textproc/mgdiff(1) for nice examples |
(3) undefined, just output the character -> perhaps WARNING |
(3) undefined, just output the character -> perhaps WARNING |
|
loc *** exist ** algo ** size ** imp *** (parser reorg helps) |
|
|
- The \t escape sequence is the same as a literal tab, see for example |
- kettenis wants base roff, ms, and me Fri, 1 Jan 2010 22:13:15 +0100 (CET) |
the ASCII table in hexdump(1) where |
loc ** exist ** algo ** size *** imp * |
.Bl -column \&000_nu \&001_so \&002_st \&003_et \&004_eo |
|
.It \&000\ nul\t001\ soh\t002\ stx\t003\ etx\t004\ eot\t005\ enq |
|
produces |
|
000 nul 001 soh 002 stx 003 etx 004 eot 005 enq |
|
and the example in oldrdist(1) |
|
|
|
|
--- compatibility checks ----------------------------------------------- |
|
|
|
- write a configure check for [[:<:]] support and provide some |
|
fallback for whatis(1) when it doesn't work; |
|
Svyatoslav Mishyn Wed, 17 Dec 2014 11:07:10 +0200 |
|
|
|
- is .Bk implemented correctly in modern groff? |
|
sobrado@ Tue, 19 Apr 2011 22:12:55 +0200 |
|
|
|
- compare output to Heirloom roff, Solaris roff, and |
|
http://repo.or.cz/w/neatroff.git http://litcave.rudi.ir/ |
|
|
|
- look at AT&T DWB http://www2.research.att.com/sw/download |
|
Carsten Kunze <carsten dot kunze at arcor dot de> has patches |
|
Mon, 4 Aug 2014 17:01:28 +0200 |
|
|
- look at pages generated from reStructeredText, e.g. devel/mercurial hg(1) |
- look at pages generated from reStructeredText, e.g. devel/mercurial hg(1) |
These are a weird mixture of man(7) and custom autogenerated low-level |
These are a weird mixture of man(7) and custom autogenerated low-level |
roff stuff. Figure out to what extent we can cope. |
roff stuff. Figure out to what extent we can cope. |
|
|
noted by stsp@ Sat, 24 Apr 2010 09:17:55 +0200 |
noted by stsp@ Sat, 24 Apr 2010 09:17:55 +0200 |
reminded by nicm@ Mon, 3 May 2010 09:52:41 +0100 |
reminded by nicm@ Mon, 3 May 2010 09:52:41 +0100 |
|
|
|
- look at pages generated from ronn(1) github.com/rtomayko/ronn |
|
(based on markdown) |
|
|
|
- look at pages generated from Texinfo source by yat2m, e.g. security/gnupg |
|
First impression is not that bad. |
|
|
|
- look at pages generated by pandoc; see |
|
https://github.com/jgm/pandoc/blob/master/src/Text/Pandoc/Writers/Man.hs |
|
porting planned by kili@ Thu, 19 Jun 2014 19:46:28 +0200 |
|
|
- check compatibility with Plan9: |
- check compatibility with Plan9: |
http://swtch.com/usr/local/plan9/tmac/tmac.an |
http://swtch.com/usr/local/plan9/tmac/tmac.an |
http://swtch.com/plan9port/man/man7/man.html |
http://swtch.com/plan9port/man/man7/man.html |
"Anthony J. Bentley" <anthonyjbentley@gmail.com> 28 Dec 2010 21:58:40 -0700 |
"Anthony J. Bentley" <anthonyjbentley@gmail.com> 28 Dec 2010 21:58:40 -0700 |
|
|
|
- check compatibility with the man(7) formatter |
|
https://raw.githubusercontent.com/rofl0r/hardcore-utils/master/man.c |
|
|
|
- check compatibility with |
|
http://ikiwiki.info/plugins/contrib/mandoc/ |
|
https://github.com/schmonz/ikiwiki/compare/mandoc |
|
Amitai Schlair Mon, 19 May 2014 14:05:53 -0400 |
|
|
************************************************************************ |
************************************************************************ |
* formatting issues: ugly output |
* formatting issues: ugly output |
************************************************************************ |
************************************************************************ |
|
|
- a column list with blank `Ta' cells triggers a spurrious |
- revisit empty in-line macros |
|
look at the difference between "Em x Em ." and "Sq x Em ." |
|
Carsten Kunze Fri, 12 Dec 2014 00:15:41 +0100 |
|
loc *** exist *** algo *** size * imp ** |
|
|
|
- a column list with blank `Ta' cells triggers a spurious |
start-with-whitespace printing of a newline |
start-with-whitespace printing of a newline |
|
|
- double quotes inside double quotes are escaped by doubling them |
- In .Bl -column, .It a<tab>"b<tab>c" |
implement this in mdoc(7), too |
shows the quotes in groff, but not in mandoc |
so far, we only have it in roff(7) and man(7) |
loc * exist *** algo ** size * imp ** |
reminded by millert@ Thu, 09 Dec 2010 17:29:52 -0500 |
|
|
|
- In .Bl -column, |
- In .Bl -column, |
.It Em Authentication<tab>Key Length |
.It Em Authentication<tab>Key Length |
ought to render "Key Length" with emphasis, too, |
ought to render "Key Length" with emphasis, too, |
see OpenBSD iked.conf(5). |
see OpenBSD iked.conf(5). |
reported again Nicolas Joly via wiz@ Wed, 12 Oct 2011 00:20:00 +0200 |
reported again Nicolas Joly via wiz@ Wed, 12 Oct 2011 00:20:00 +0200 |
|
loc * exist *** algo *** size ** imp *** |
|
|
- empty phrases in .Bl column produce too few blanks |
- empty phrases in .Bl column produce too few blanks |
try e.g. .Bl -column It Ta Ta |
try e.g. .Bl -column It Ta Ta |
reported by millert Fri, 02 Apr 2010 16:13:46 -0400 |
reported by millert Fri, 02 Apr 2010 16:13:46 -0400 |
|
loc * exist *** algo *** size * imp ** |
|
|
- .%T can have trailing punctuation. Currently, it puts the trailing |
- .%T can have trailing punctuation. Currently, it puts the trailing |
punctuation into a trailing MDOC_TEXT element inside its own scope. |
punctuation into a trailing MDOC_TEXT element inside its own scope. |
|
|
slurp all arguments into one single text element - and one feature |
slurp all arguments into one single text element - and one feature |
of in_line() - put trailing punctuation out of scope. |
of in_line() - put trailing punctuation out of scope. |
Found in mount_nfs(8) and exports(5), search for "Appendix". |
Found in mount_nfs(8) and exports(5), search for "Appendix". |
|
loc ** exist ** algo *** size * imp ** |
|
|
|
- Trailing punctuation after .%T triggers EOS spacing, at least |
|
outside .Rs (eek!). Simply setting ARGSFL_DELIM for .%T is not |
|
the right solution, it sends mandoc into an endless loop. |
|
reported by Nicolas Joly Sat, 17 Nov 2012 11:49:54 +0100 |
|
loc * exist ** algo ** size * imp ** |
|
|
|
- global variables in the SYNOPSIS of section 3 pages |
|
.Vt vs .Vt/.Va vs .Ft/.Va vs .Ft/.Fa ... |
|
from kristaps@ Tue, 08 Jun 2010 11:13:32 +0200 |
|
|
- in enclosures, mandoc sometimes fancies a bogus end of sentence |
- in enclosures, mandoc sometimes fancies a bogus end of sentence |
reminded by jmc@ Thu, 23 Sep 2010 18:13:39 +0059 |
reminded by jmc@ Thu, 23 Sep 2010 18:13:39 +0059 |
|
loc * exist ** algo *** size * imp *** |
|
|
|
- formatting /usr/local/man/man1/latex2man.1 with groff and mandoc |
|
reveals lots of bugs both in groff and mandoc... |
|
reported by bentley@ Wed, 22 May 2013 23:49:30 -0600 |
|
|
|
--- PDF issues --------------------------------------------------------- |
|
|
|
- PDF output doesn't use a monospaced font for .Bd -literal |
|
Example: "mandoc -Tpdf afterboot.8 > output.pdf && pdfviewer output.pdf". |
|
Search the text "Routing tables". |
|
Also check what PostScript mode does when fixing this. |
|
reported by juanfra@ Wed, 04 Jun 2014 21:44:58 +0200 |
|
instructions from juanfra@ Wed, 11 Jun 2014 02:21:01 +0200 |
|
add a new <</Type /Font>> block to the PDF files with /BaseFont /Courier |
|
and change the /Name from /F0 to the new font (/F5 (?)). |
|
loc * exist ** algo ** size * imp ** |
|
|
|
--- HTML issues -------------------------------------------------------- |
|
|
|
- <dl><dt><dd> formatting is ugly |
|
hints are easy to find on the web, e.g. |
|
http://stackoverflow.com/questions/1713048/ |
|
see also matthew@ Fri, 18 Jul 2014 19:25:12 -0700 |
|
loc * exist * algo ** size * imp *** |
|
|
|
- jsg on icb, Nov 3, 2014: |
|
try to guess Xr in man(7) for hyperlinking |
|
|
|
- The tables used to render the three-part page headers actually force |
|
the width of the <body> to the max-width given for <html>. |
|
Not yet sure how to fix that... |
|
Observed by an Anonymous Coward on undeadly.org: |
|
http://undeadly.org/cgi?action=article&sid=20140925064244&pid=1 |
|
loc * exist * algo ** size * imp *** |
|
|
|
- consider whether <var> can be used for Ar Dv Er Ev Fa Va. |
|
from bentley@ Wed, 13 Aug 2014 09:17:55 -0600 |
|
|
|
- check https://github.com/trentm/mdocml |
|
|
************************************************************************ |
************************************************************************ |
* formatting issues: gratuitous differences |
* formatting issues: gratuitous differences |
************************************************************************ |
************************************************************************ |
|
|
- .Rv (and probably .Ex) print different text if an `Nm' has been named |
- .Fn reopens a new scope after punctuation in mandoc, |
or not (run a manual without `Nm blah' to see this). I'm not sure |
but closes its scope for good in groff. |
that this exists in the wild, but it's still an error. |
Do we want to change mandoc or groff? |
|
Steffen Nurpmeso Sat, 08 Nov 2014 13:34:59 +0100 |
|
loc * exist ** algo ** size * imp ** |
|
|
- In .Bl -bullet, the groff bullet is "+\b+\bo\bo", the mandoc bullet |
- In .Bl -enum -width 0n, groff continues one the same line after |
is just "o\bo". |
the number, mandoc breaks the line. |
see for example OpenBSD ksh(1) |
mail to kristaps@ Mon, 20 Jul 2009 02:21:39 +0200 |
|
loc * exist ** algo ** size * imp ** |
|
|
- A bogus .Pp between two .It must not produce a double blank line, |
|
see between -R and -r in OpenBSD rm(1), before "update" in mount(8), |
|
or in DIAGNOSTICS in init(8), or before "is always true" in ksh(1). |
|
The same happens with .Pp just before .El, see bgpd.conf(5). |
|
Also have `It' complain if `Pp' is invoked at certain times (not |
|
-compact?). |
|
|
|
- .Pp between two .It in .Bl -column should produce one, |
- .Pp between two .It in .Bl -column should produce one, |
not two blank lines, see e.g. login.conf(5). |
not two blank lines, see e.g. login.conf(5). |
reported by jmc@ Sun, 17 Apr 2011 14:04:58 +0059 |
reported by jmc@ Sun, 17 Apr 2011 14:04:58 +0059 |
reported again by sthen@ Wed, 18 Jan 2012 02:09:39 +0000 (UTC) |
reported again by sthen@ Wed, 18 Jan 2012 02:09:39 +0000 (UTC) |
|
loc * exist *** algo ** size * imp ** |
|
|
- If the *first* line after .It is .Pp, break the line right after |
- If the *first* line after .It is .Pp, break the line right after |
the tag, do not pad with space characters before breaking. |
the tag, do not pad with space characters before breaking. |
See the description of the a, c, and i commands in sed(1). |
See the description of the a, c, and i commands in sed(1). |
|
loc * exist ** algo ** size * imp ** |
|
|
- If the first line after .It is .D1, do not assert a blank line |
- If the first line after .It is .D1, do not assert a blank line |
in between, see for example tmux(1). |
in between, see for example tmux(1). |
reported by nicm@ 13 Jan 2011 00:18:57 +0000 |
reported by nicm@ 13 Jan 2011 00:18:57 +0000 |
|
loc * exist ** algo ** size * imp ** |
|
|
|
- Trailing punctuation after .It should trigger EOS spacing. |
|
reported by Nicolas Joly Sat, 17 Nov 2012 11:49:54 +0100 |
|
Probably, this should be fixed somewhere in termp_it_pre(), not sure. |
|
loc * exist ** algo ** size * imp ** |
|
|
- .Nx 1.0a |
- .Nx 1.0a |
should be "NetBSD 1.0A", not "NetBSD 1.0a", |
should be "NetBSD 1.0A", not "NetBSD 1.0a", |
see OpenBSD ccdconfig(8). |
see OpenBSD ccdconfig(8). |
|
loc * exist * algo * size * imp ** |
|
|
- In .Bl -tag, if a tag exceeds the right margin and must be continued |
- In .Bl -tag, if a tag exceeds the right margin and must be continued |
on the next line, it must be indented by -width, not width+1; |
on the next line, it must be indented by -width, not width+1; |
see "rule block|pass" in OpenBSD ifconfig(8). |
see "rule block|pass" in OpenBSD ifconfig(8). |
|
loc * exist *** algo ** size * imp ** |
|
|
- When the -width string contains macros, the macros must be rendered |
- When the -width string contains macros, the macros must be rendered |
before measuring the width, for example |
before measuring the width, for example |
|
|
as -width 7n, not -width 11n. |
as -width 7n, not -width 11n. |
The same applies to .Bl -column column widths; |
The same applies to .Bl -column column widths; |
reported again by Nicolas Joly Thu, 1 Mar 2012 13:41:26 +0100 via wiz@ 5 Mar |
reported again by Nicolas Joly Thu, 1 Mar 2012 13:41:26 +0100 via wiz@ 5 Mar |
|
reported again by Franco Fichtner Fri, 27 Sep 2013 21:02:28 +0200 |
|
loc *** exist *** algo *** size ** imp *** |
|
An easy partial fix would be to just skip the first word if it starts |
|
with a dot, including any following white space, when measuring. |
|
loc * exist * algo * size * imp *** |
|
|
- The \& zero-width character counts as output. |
- The \& zero-width character counts as output. |
That is, when it is alone on a line between two .Pp, |
That is, when it is alone on a line between two .Pp, |
we want three blank lines, not two as in mandoc. |
we want three blank lines, not two as in mandoc. |
|
loc ** exist ** algo ** size * imp ** |
|
|
- When .Fn arguments exceed one output line, all but the first |
|
should be indented, see e.g. rpc(3); |
|
reported by jmc@ on discuss@ Fri, 29 Oct 2010 13:48:33 +0100 |
|
reported again by Nicolas Joly via wiz@ Sun, 18 Sep 2011 18:24:40 +0200 |
|
Also, we don't want to break the line within the argument of: |
|
.Fa "chtype tl" |
|
|
|
- .Ns should work when called at the end of an input line, see |
|
the following code in vi(1): |
|
.It Xo |
|
.Op Ar line |
|
.Cm a Ns Op Cm ppend Ns |
|
.Op Cm !\& |
|
.Xc |
|
The input text is appended after the specified line. |
|
|
|
- Header lines of excessive length: |
- Header lines of excessive length: |
Port OpenBSD man_term.c rev. 1.25 to mdoc_term.c |
Port OpenBSD man_term.c rev. 1.25 to mdoc_term.c |
and document it in mdoc(7) and man(7) COMPATIBILITY |
and document it in mdoc(7) and man(7) COMPATIBILITY |
found while talking to Chris Bennett |
found while talking to Chris Bennett |
|
loc * exist * algo * size * imp * |
|
|
- In man(7), the sequence |
|
.SH HEADER |
|
<blank line> |
|
.PP |
|
regular text |
|
should not produce any blank lines between the header and the text, |
|
see for example rsync(1). |
|
Reported by naddy@ Mon, 28 Mar 2011 20:45:42 +0200 |
|
|
|
- In man(7), the sequence |
|
regular text |
|
.IP |
|
.IP "tag" |
|
indented text |
|
should produce one, not four blank lines between the regular text |
|
and the tag, see for example rsync(1). |
|
Likewise, |
|
regular text |
|
.IP |
|
indented text |
|
should produce one, not two blank lines in between, and |
|
regular text |
|
.IP |
|
.RS |
|
.IP tag |
|
indented text |
|
should produce one, not three blank lines. |
|
Reported by naddy@ Mon, 28 Mar 2011 20:45:42 +0200 |
|
|
|
- trailing whitespace must be ignored even when followed by a font escape, |
- trailing whitespace must be ignored even when followed by a font escape, |
see for example |
see for example |
makes |
makes |
\fBdig \fR |
\fBdig \fR |
operate in batch mode |
operate in batch mode |
in dig(1). |
in dig(1). |
|
loc ** exist ** algo ** size * imp ** |
|
|
************************************************************************ |
************************************************************************ |
|
* warning issues |
|
************************************************************************ |
|
|
|
- check that MANDOCERR_BADTAB is thrown in the right cases, |
|
i.e. when finding a literal tab character in fill mode, |
|
and possibly change the wording of the warning message |
|
to refer to fill mode, not literal mode |
|
See the mail from Werner LEMBERG on the groff list, |
|
Fri, 14 Feb 2014 18:54:42 +0100 (CET) |
|
loc * exist ** algo ** size * imp ** |
|
|
|
- warn about attempts to call non-callable macros |
|
Steffen Nurpmeso Tue, 11 Nov 2014 22:55:16 +0100 |
|
Note that formatting is inconsistent in groff. |
|
.Fn Po prints "Po()", .Ar Sh prints "file ..." and no "Sh". |
|
Relatively hard because the relevant code is scattered |
|
all over mdoc_macro.c and all subtly different. |
|
loc ** exist ** algo ** size ** imp ** |
|
|
|
- warn about "new sentence, new line" |
|
loc ** exist ** algo *** size * imp ** |
|
|
|
- mandoc_special does not really check the escape sequence, |
|
but just the overall format |
|
loc ** exist ** algo *** size ** imp ** |
|
|
|
- integrate mdoclint into mandoc ("end-of-line whitespace" thread) |
|
from jmc@ Mon, 13 Jul 2009 17:12:09 +0100 |
|
from kristaps@ Mon, 13 Jul 2009 18:34:53 +0200 |
|
from jmc@ Mon, 13 Jul 2009 17:45:37 +0059 |
|
from kristaps@ Mon, 13 Jul 2009 19:02:03 +0200 |
|
(mostly done, check what remains) |
|
|
|
- -Tlint parser errors and warnings to stdout |
|
to tech@mdocml, naddy@ Wed, 28 Sep 2011 11:21:46 +0200 |
|
wait! kristaps@ Sun, 02 Oct 2011 17:12:52 +0200 |
|
|
|
- for system errors, use errno/strerror/warn/err |
|
|
|
************************************************************************ |
|
* documentation issues |
|
************************************************************************ |
|
|
|
- mention hyphenation rules: |
|
breaking at letter-letter in text mode (not macro args) |
|
proper hyphenation is unimplemented |
|
|
|
- talk about spacing around delimiters |
|
to jmc@, kristaps@ Sat, 23 Apr 2011 17:41:27 +0200 |
|
|
|
- mark macros as: page structure domain, manual domain, general text domain |
|
is this useful? |
|
|
|
- mention /usr/share/misc/mdoc.template in mdoc(7)? |
|
|
|
- Is all the content from http://www.std.com/obi/BSD/doc/usd/28.tbl/tbl |
|
covered in tbl(7)? |
|
|
|
************************************************************************ |
* performance issues |
* performance issues |
************************************************************************ |
************************************************************************ |
|
|
|
- Why are we using MAP_SHARED, not MAP_PRIVATE for mmap(2)? |
|
How does SQLITE_CONFIG_PAGECACHE actually work? Document it! |
|
from kristaps@ Sat, 09 Aug 2014 13:51:36 +0200 |
|
|
Several areas can be cleaned up to make mandoc even faster. These are |
Several areas can be cleaned up to make mandoc even faster. These are |
|
|
- improve hashing mechanism for macros (quite important: performance) |
- improve hashing mechanism for macros (quite important: performance) |
Line 314 Several areas can be cleaned up to make mandoc even fa |
|
Line 545 Several areas can be cleaned up to make mandoc even fa |
|
|
|
- instead of re-initialising the roff predefined-strings set before each |
- instead of re-initialising the roff predefined-strings set before each |
parse, create a read-only version the first time and copy it |
parse, create a read-only version the first time and copy it |
|
loc * exist ** algo ** size * imp ** |
|
|
************************************************************************ |
************************************************************************ |
* structural issues |
* structural issues |
************************************************************************ |
************************************************************************ |
|
|
|
- Use libz directly instead of forking gunzip(1). |
|
Suggested by bapt at FreeBSD among others. |
|
|
- We use the input line number at several places to distinguish |
- We use the input line number at several places to distinguish |
same-line from different-line input. That plainly doesn't work |
same-line from different-line input. That plainly doesn't work |
with user-defined macros, leading to random breakage. |
with user-defined macros, leading to random breakage. |
Line 330 Several areas can be cleaned up to make mandoc even fa |
|
Line 565 Several areas can be cleaned up to make mandoc even fa |
|
Decide which formats should be recognized where. |
Decide which formats should be recognized where. |
Update both mdoc(7) and man(7) documentation. |
Update both mdoc(7) and man(7) documentation. |
Triggered by Tim van der Molen Tue, 22 Feb 2011 20:30:45 +0100 |
Triggered by Tim van der Molen Tue, 22 Feb 2011 20:30:45 +0100 |
|
|
|
- struct mparse refactoring |
|
Steffen Nurpmeso Thu, 04 Sep 2014 12:50:00 +0200 |
|
|
|
- Consider creating some views that will make the database more |
|
readable from the sqlite3 shell. Consider using them to |
|
abstract from the database structure, too. |
|
suggested by espie@ Sat, 19 Apr 2014 14:52:57 +0200 |
|
|
|
************************************************************************ |
|
* CGI issues |
|
************************************************************************ |
|
|
|
- Enable HTTP compression by detecting gzip encoding and filtering |
|
output through libz. |
|
- Sandbox (see OpenSSH). |
|
- Enable caching support via HTTP 304 and If-Modified-Since. |
|
- Allow for cgi.h to be overridden by CGI environment variables. |
|
Otherwise, binary distributions will inherit the compile-time |
|
behaviour, which is not optimal. |
|
- Have Mac OSX systems automatically disable -static compilation of the |
|
CGI: -static isn't supported. |
|
|
|
************************************************************************ |
|
* to improve in the groff_mdoc(7) macros |
|
************************************************************************ |
|
|
|
- use uname(1) to set doc-default-operating-system at install time |
|
tobimensch Mon, 1 Dec 2014 00:25:07 +0100 |