=================================================================== RCS file: /cvs/mandoc/TODO,v retrieving revision 1.102 retrieving revision 1.323 diff -u -p -r1.102 -r1.323 --- mandoc/TODO 2011/04/16 23:00:45 1.102 +++ mandoc/TODO 2022/04/14 10:14:53 1.323 @@ -1,30 +1,79 @@ ************************************************************************ * Official mandoc TODO. -* $Id: TODO,v 1.102 2011/04/16 23:00:45 schwarze Exp $ +* $Id: TODO,v 1.323 2022/04/14 10:14:53 schwarze Exp $ ************************************************************************ +Many issues are annotated for difficulty as follows: + + - loc = locality of the issue + * single file issue, affects file only, or very few + ** single module issue, affects several files of one module + *** cross-module issue, significantly impacts multiple modules + and may require substantial changes to internal interfaces + - exist = difficulty of the existing code in this area + * affected code is straightforward and easy to read and change + ** affected code is somewhat complex, but once you understand + the design, not particularly difficult to understand + *** affected code uses a special, exceptionally tricky design + - algo = difficulty of the new algorithm to be written + * the required logic and code is straightforward + ** the required logic is somewhat complex and needs a careful design + *** the required logic is exceptionally tricky, + maybe an approach to solve that is not even known yet + - size = the amount of code to be written or changed + * a small number of lines (at most 100, usually much less) + ** a considerable amount of code (several dozen to a few hundred) + *** a large amount of code (many hundreds, maybe thousands) + - imp = importance of the issue + * mostly for completeness + ** would be nice to have + *** issue causes considerable inconvenience + +Obviously, as the issues have not been solved yet, these annotations +are mere guesses, and some may be wrong. + ************************************************************************ -* parser bugs +* assertion failures ************************************************************************ -- .TP before .SH is still FATAL in man(7) - reported by brad@ Sat, 15 Jan 2011 15:54:54 -0500 +- .if n .ce in the middle of .TS data + afl case f1/id:000103,sig:06,src:009024+009105,op:splice,rep:2 (jes@) + While roff_parseln() prevents .ce and similar requests in the middle + of a tbl, the guard is no longer effective when the .ce is wrapped + in a roff block, for example a conditional. The resulting assertion + has never been seen in any real-world manual page. + This is too dangerous to fix before release because it requires + reorganizing the very delicate internals of roff_parseln(), + which risks causing more severe bugs. + loc * exist *** algo *** size * imp * -- the roff parser doesn't tolerate additional characters between - a macro and the \} terminating a conditional block, e.g. - .if n \{ - .br \} - reported by ulrich spoerlein Tue, 19 Oct 2010 20:39:50 +0200 ************************************************************************ -* formatter bugs +* bugs: invalid output ************************************************************************ -- tbl(7): Horizontal and vertical lines are formatted badly: - With the box option, there is too much white space at the end of cells. - Horizontal lines from "=" lines are a bit too long. - yuri dot pankov at gmail dot com Thu, 14 Apr 2011 05:45:26 +0400 +- wrong number of layout columns in tbl(7) code generated by -T man + https://savannah.gnu.org/bugs/?57720 + The reason likely is that tbl(7) does not support the -Bl -column + feature of not explicitly specifying the last table column. + loc ** exist * algo ** size * imp *** +- eqn(7) delimiters cause conditional lines to misbehave + nabijaczleweli 8 Sep 2021 15:24:48 +0200 + loc * exist *** algo *** size * imp * + +- roff.c, roff_expand() should not remove blanks before comments + to Oliver Corff, Sep 7, 2021 + loc * exist * algo * size * imp * + but watch out for regressions in the high-level parsers + maybe it should not even remove comments? - consider T{\" + +- tag.c, tag_put() should not put ASCII_HYPH into the tag file, + which happens when the tag contains "-" on the input side + weerd@ 28 Sep 2021 12:44:07 +0200 + loc * exist * algo * size * imp *** + + ************************************************************************ * missing features ************************************************************************ @@ -39,32 +88,75 @@ .na -- temporarily disable adjustment without changing the mode .ad -- re-enable adjustment without changing the mode Adjustment mode is ignored while in no-fill mode (.nf). + loc *** exist *** algo ** size ** imp ** (parser reorg would help) -- .it (line traps) occur in mysql(1), yasm_arch(7) - generated by DocBook XSL Stylesheets v1.71.1 - reported by brad@ Sat, 15 Jan 2011 15:48:18 -0500 +- .fc (field control) + found by naddy@ in xloadimage(1) + loc ** exist *** algo * size * imp * - .ns (no-space mode) occurs in xine-config(1) + when implementing this, also let .TH set it reported by brad@ Sat, 15 Jan 2011 15:45:23 -0500 + loc *** exist *** algo *** size ** imp * -- xloadimage(1) wants .ti (temporary indent), rep by naddy@ +- \w'' improve width measurements + would not be very useful without an expression parser, see below + needed for Tcl_NewStringObj(3) via wiz@ Wed, 5 Mar 2014 22:27:43 +0100 + loc ** exist *** algo *** size * imp *** -- .ta (tab settings) occurs in ircbug(1) and probably gnats(1) - reported by brad@ Sat, 15 Jan 2011 15:50:51 -0500 +- .als only works for macros in mandoc, not for user-defined strings. + Also, the "val" field in struct roffkv would have to be replaced + with a pointer to a reference-counted wrapper, and an alias + would have to point to the same wrapper as the original. + .als to undefined does nothing; the alias is not created. + .rm'ing the original leaves the alias to point to the old value. + .de .als .de changes both, but + .de .als .rm .de only changes the new value, not the alias. + Found in groffer(1) version 1.19 + Jan Stary 20 Apr 2019 20:16:54 +0200 + loc * exist ** algo ** size ** imp * -- pod2man expects `tr' to be implemented for \*(-- to work +- roff string condition comparisons fail when vars contain quotes: + .ds s ' + .if '\*s'' \&... + hard to fix because of the basic architecture (string replacement + happens before roff(7) syntax parsing) + Found in groffer(1) version 1.19 + Jan Stary 20 Apr 2019 20:16:54 +0200 + loc * exist *** algo *** size ** imp * -- \c (interrupted text) occurs in chat(8) +- mandoc replaces all ASCII control characters except tab and line feed + with '?' during input. It would be better to replace them with + Unicode escapes in preconv_encode() or somewhere in the vicinity, + such that the already existing better replacement strings show + up in the output. Emulating groff is not desirable: groff replaces + 0x00, 0x0b, and 0x0d to 0x1f with the empty string (bad because + that's easy to overlook for the document author), 0x01 with '.' + (very confusing), and passes through 0x02 to 0x08, 0x0c, and 0x7f + raw (bad because that is insecure output). Remember that 0x07 may + need special handling because it is sometimes used for certain + delimiters, so it may need handling *after* roff.c rather than before. + reminded by John Gardner 16 Jun 2020 14:26:28 +1000 + Actually, more ASCII control characters than just 0x07 may need + later handling because they can for example be used in macro names. + So they may need handling after roff(7) processing. + pointed out by John Gardner 23 Jun 2020 18:28:08 +1000 + more info from John Gardner 29 Jun 2020 19:54:04 +1000 + loc ** exist ** algo ** size ** imp * -- \f(CW (constant width font) occurs in rsyncd.conf(5). - I think we should treat unknown/unavailable fonts as \fR - such that switching back with \fP works correctly - - and doesn't revert the _previous_ \fP. +- many missing features used in old groff_char(7), + some can possibly be supported + kamil at netbsd 12 Nov 2020 17:27:09 +0100 + reply +- \s with arbitrary arg delimiters as already supported for other escapes + found following jmc@'s mail 28 Apr 2021 18:31:41 +0100 + loc * exist * algo * size * imp * + --- missing mdoc features ---------------------------------------------- -- fix bad block nesting involving multiple identical explicit blocks - see the OpenBSD mdoc_macro.c 1.47 commit message +- .Sh and .Ss should be parsed and partially callable, see groff_mdoc(7) + reed at reedmedia dot net Sat, 21 Dec 2019 17:13:07 -0600 + loc ** exist ** algo ** size ** imp * - .Bl -column .Xo support is missing ultimate goal: @@ -72,29 +164,27 @@ lib/libc/compat-43/sigvec.3 lib/libc/gen/signal.3 lib/libc/sys/sigaction.2 + loc * exist *** algo *** size * imp ** - edge case: decide how to deal with blk_full bad nesting, e.g. .Sh .Nm .Bk .Nm .Ek .Sh found by jmc@ in ssh-keygen(1) from jmc@ Wed, 14 Jul 2010 18:10:32 +0100 + loc * exist *** algo *** size ** imp ** -- \\ is now implemented correctly - * when defining strings and macros using .ds and .de - * when parsing roff(7) and man(7) macro arguments - It does not yet work in mdoc(7) macro arguments - because libmdoc does not yet use mandoc_getarg(). - Also check what happens in plain text, it must be identical to \e. - - .Bd -filled should not be the same as .Bd -ragged, but align both the left and right margin. In groff, it is implemented in terms of .ad b, which we don't have either. Found in cksum(1). + loc *** exist *** algo ** size ** imp ** (parser reorg would help) - implement blank `Bl -column', such as .Bl -column .It foo Ta bar .El + loc * exist *** algo *** size * imp * - explicitly disallow nested `Bl -column', which would clobber internal flags defined for struct mdoc_macro + loc * exist * algo * size * imp ** - In .Bl -column .It, the end of the line probably has to be regarded as an implicit .Ta, if there could be one, see the following mildly @@ -105,6 +195,7 @@ Default search path. reported by Michal Mazurek via jmc@ Thu, 7 Apr 2011 16:00:53 +0059 + loc * exist *** algo ** size * imp ** - inside `.Bl -column' phrases, punctuation is handled like normal text, e.g. `.Bl -column .It Fl x . Ta ...' should give "-x -." @@ -113,45 +204,160 @@ is not safe, e.g. `.Bl -column .It Pf a b .' gives "ab." but should give "ab ." -- set a meaningful default if no `Bl' list type is assigned - -- have a blank `It' head for `Bl -tag' not puke - - prohibit `Nm' from having non-text HEAD children (e.g., NetBSD mDNSShared/dns-sd.1) (mdoc_html.c and mdoc_term.c `Nm' handlers can be slightly simplified) +- support translated section names + e.g. x11/scrotwm scrotwm_es.1:21:2: error: NAME section must be first + that one uses NOMBRE because it is spanish... + deraadt tends to think that section-dependent macro behaviour + is a bad idea in the first place, so this may be irrelevant + loc ** exist ** algo ** size * imp ** + +- When there is free text in the SYNOPSIS and that free text contains + the .Nm macro, groff somehow understands to treat the .Nm as an in-line + macro, while mandoc treats it as a block macro and breaks the line. + No idea how the logic for distinguishing in-line and block instances + should be, needs investigation. + uqs@ Thu, 2 Jun 2011 11:03:51 +0200 + uqs@ Thu, 2 Jun 2011 11:33:35 +0200 + loc * exist ** algo *** size * imp ** + --- missing man features ----------------------------------------------- -- .RS/.RE can be nested, see e.g. the x11/fluxbox manuals - noticed by dcoppa@ Wed, Apr 13, 2011 at 04:58:14PM +0200: +- MANWIDTH + Markus Waldeck 9 Jun 2015 05:49:56 +0200 + Laura Morales 26 Apr 2018 08:15:55 +0200 + Kamil Rytarowski 13 Nov 2020 00:19:36 +0100 + patch from Kamil 13 Nov 2020 22:37:07 +0100 + loc * exist * algo * size * imp * -- groff an-ext.tmac macros (.UR, .UE) occur in xine(5) - reported by brad@ Sat, 15 Jan 2011 15:45:23 -0500 +- groff_www(7) .MTO and .URL + These macros were used by the GNU grep(1) man page. + The groff_www(7) manual page itself uses them, too. + We should probably *not* add them to mandoc. + Just mentioning this here to keep track of the abuse. + Laura Morales 20 Apr 2018 07:33:02 +0200 + loc ** exist * algo * size ** imp * --- missing tbl features ----------------------------------------------- -- implement basic non-parametric .de to support e.g. sox(1) - reported by naddy@ Sat, 16 Oct 2010 23:51:57 +0200 - *** sox(1) still doesn't work, tbl(1) errors need investigation +- vertical centering in cells vertically spanned with ^ + pali dot rohar at gmail dot com 16 Jul 2018 13:03:35 +0200 + loc * exist *** algo *** size ** imp * +- support mdoc(7) and man(7) macros inside tbl(7) code; + probably requires the parser reorg and letting tbl(7) + use roff_node such that macro sets can mix; + informed by bapt@ that FreeBSD needs this: 3 Jan 2015 23:32:23 +0100 + loc *** exist ** algo *** size ** imp *** + +- look at the POSIX manuals in the books/man-pages-posix port, + they use some unsupported tbl(7) features, mostly macros in tbl(7). + loc * exist ** algo ** size ** imp *** + +- look what Joerg Schilling manual pages use + Thu, 19 Mar 2015 18:31:48 +0100 + +--- missing eqn features ----------------------------------------------- + +- In a matrix, break the output line after each matrix line. + Found in the discussion at CDBUG 2015. Suggested by Avi Weinstock. + This may not be the ideal solution after all: eqn(7) matrices + are lists of columns, so Avi's proposal would show each *column* + on its own *line*, which is likely to cause confusion. + A better solution, but much harder to implement, would be to + actually show the coordinates of column vectors on different + terminal output lines, using the clumnated output facilities + developed for .Bl -tag, .Bl -column, and also used for tbl(7). + loc * exist * algo ** size ** imp ** + +- The "size" keyword is parsed, but ignored by the formatter. + loc * exist * algo * size * imp * + +- The spacing characters `~', `^', and tab are currently ignored, + see User's Guide (Second Edition) page 2 section 4. + loc * exist * algo ** size * imp ** + +- Mark and lineup are parsed and ignored, + see User's Guide (Second Edition) page 5 section 15. + loc ** exist ** algo ** size ** imp ** + +- GNU eqn converts some operators to special characters, for example, + input HYPHEN-MINUS becomes output \(mi, unless it is part of a + quoted word. mandoc(1) only does this when the operator is + surrounded by blanks, not when it is part of an unquoted word. + Also, check whether there are more such cases (e.g., +?). + reported by bentley@ 20 Jun 2017 02:04:29 -0600 + loc * exist ** algo ** size * imp * + +- Primes, opprime, and ' + bentley@ Thu, 13 Jul 2017 23:14:20 -0600 + --- missing misc features ---------------------------------------------- +- conisder whether man(1) fallback code in main.c/fs_*() can find files + like man3c/fopen.3c (illumos, Solaris) and man3p/fopen.3p (POSIX) + discussed with Robert Mustacchi 21 Sep 2021 10:39:40 -0700 + loc * exist * algo ** size * imp ** + +- let makewhatis(8) follow symbolic links to dirs below READ_ALLOWED_PATH + this may be feasible using fts_set(FTS_FOLLOW) + mail to sternenseemann 19 Aug 2021 19:11:50 +0200 + loc * exist ** algo ** size * imp ** + +- tag.c, tag_put() and callers like man_validate.c, check_tag() + should not mistake "\-" as a word-ending escape sequence but + instead translate it to plain "-" in the tag name + weerd@ 28 Sep 2021 12:44:07 +0200 + loc ** exist * algo * size * imp *** + +- handle Unicode letters in tags in both HTML and terminal output + thread "section headers with diacritics" starting with + Mario Blaettermann 24 Mar 2022 18:13:23 +0100 + loc ** exist * algo * size * imp ** + +- -T man does not handle eqn(7) and tbl(7) + Stephen Gregoratto 16 Feb 2020 01:28:07 +1100 + also https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=901636 + loc ** exist ** algo ** size *** imp ** + +- man -ks 1,8 route; kn@ Jul 13, 2018 orally + +- italic correction (\/) in PostScript mode + Werner LEMBERG on groff at gnu dot org Sun, 10 Nov 2013 12:47:46 + loc ** exist ** algo * size * imp * + +- change the default PAGER to more -Es and use the pager + even for apropos title line output; req by bapt@ + loc * exist * algo * size * imp *** + - clean up escape sequence handling, creating three classes: (1) fully implemented, or parsed and ignored without loss of content (2) unimplemented, potentially causing loss of content or serious mangling of formatting (e.g. \n) -> ERROR see textproc/mgdiff(1) for nice examples (3) undefined, just output the character -> perhaps WARNING + loc *** exist ** algo ** size ** imp *** (parser reorg helps) -- The \t escape sequence is the same as a literal tab, see for example - the ASCII table in hexdump(1) where - .Bl -column \&000_nu \&001_so \&002_st \&003_et \&004_eo - .It \&000\ nul\t001\ soh\t002\ stx\t003\ etx\t004\ eot\t005\ enq - produces - 000 nul 001 soh 002 stx 003 etx 004 eot 005 enq - and the example in oldrdist(1) +- kettenis wants base roff, ms, and me Fri, 1 Jan 2010 22:13:15 +0100 (CET) + loc ** exist ** algo ** size *** imp * +--- compatibility checks ----------------------------------------------- + +- is .Bk implemented correctly in modern groff? + sobrado@ Tue, 19 Apr 2011 22:12:55 +0200 + +- compare output to Heirloom roff, Solaris roff, and + http://repo.or.cz/w/neatroff.git http://litcave.rudi.ir/ + +- look at AT&T DWB http://www2.research.att.com/sw/download + Carsten Kunze has patches + Mon, 4 Aug 2014 17:01:28 +0200 + ported version: https://github.com/n-t-roff/DWB3.3 + Carsten Kunze Wed, 22 Apr 2015 11:21:43 +0200 + - look at pages generated from reStructeredText, e.g. devel/mercurial hg(1) These are a weird mixture of man(7) and custom autogenerated low-level roff stuff. Figure out to what extent we can cope. @@ -159,34 +365,69 @@ noted by stsp@ Sat, 24 Apr 2010 09:17:55 +0200 reminded by nicm@ Mon, 3 May 2010 09:52:41 +0100 +- look at pages generated from ronn(1) github.com/rtomayko/ronn + (based on markdown) + +- look at pages generated from Texinfo source by yat2m, e.g. security/gnupg + First impression is not that bad. + +- look at pages generated by pandoc; see + https://github.com/jgm/pandoc/blob/master/src/Text/Pandoc/Writers/Man.hs + porting planned by kili@ Thu, 19 Jun 2014 19:46:28 +0200 + - check compatibility with Plan9: http://swtch.com/usr/local/plan9/tmac/tmac.an http://swtch.com/plan9port/man/man7/man.html "Anthony J. Bentley" 28 Dec 2010 21:58:40 -0700 +- check compatibility with COHERENT troff: + http://www.nesssoftware.com/home/mwc/source.php + +- check compatibility with the man(7) formatter + https://raw.githubusercontent.com/rofl0r/hardcore-utils/master/man.c + +- check compatibility with + http://ikiwiki.info/plugins/contrib/mandoc/ + https://github.com/schmonz/ikiwiki/compare/mandoc + Amitai Schlair Mon, 19 May 2014 14:05:53 -0400 + +- check compatibility with + https://git.sr.ht/~sircmpwn/scdoc + +- check features of the Slackware man.conf(5) format + Carsten Kunze Wed, 11 Mar 2015 17:57:24 +0100 + +- look at http://www.snake.net/software/troffcvt/ (troff to HTML) + mentioned by Oliver Corff 22 Jan 2021 01:36:49 +0100 + + ************************************************************************ * formatting issues: ugly output ************************************************************************ -- a column list with blank `Ta' cells triggers a spurrious +- revisit empty in-line macros + look at the difference between "Em x Em ." and "Sq x Em ." + Carsten Kunze Fri, 12 Dec 2014 00:15:41 +0100 + loc *** exist *** algo *** size * imp ** + +- a column list with blank `Ta' cells triggers a spurious start-with-whitespace printing of a newline -- double quotes inside double quotes are escaped by doubling them - implement this in mdoc(7), too - so far, we only have it in roff(7) and man(7) - reminded by millert@ Thu, 09 Dec 2010 17:29:52 -0500 +- In .Bl -column, .It a"bc" + shows the quotes in groff, but not in mandoc + loc * exist *** algo ** size * imp ** -- perl(1) SYNOPSIS looks bad; reported by deraadt@ - 1) man(7) seems to need SYNOPSIS .Nm blocks, too - - In .Bl -column, .It Em AuthenticationKey Length ought to render "Key Length" with emphasis, too, see OpenBSD iked.conf(5). + reported again Nicolas Joly via wiz@ Wed, 12 Oct 2011 00:20:00 +0200 + loc * exist *** algo *** size ** imp *** - empty phrases in .Bl column produce too few blanks try e.g. .Bl -column It Ta Ta reported by millert Fri, 02 Apr 2010 16:13:46 -0400 + loc * exist *** algo *** size * imp ** - .%T can have trailing punctuation. Currently, it puts the trailing punctuation into a trailing MDOC_TEXT element inside its own scope. @@ -196,168 +437,316 @@ slurp all arguments into one single text element - and one feature of in_line() - put trailing punctuation out of scope. Found in mount_nfs(8) and exports(5), search for "Appendix". + loc ** exist ** algo *** size * imp ** +- Trailing punctuation after .%T triggers EOS spacing, at least + outside .Rs (eek!). Simply setting ARGSFL_DELIM for .%T is not + the right solution, it sends mandoc into an endless loop. + reported by Nicolas Joly Sat, 17 Nov 2012 11:49:54 +0100 + loc * exist ** algo ** size * imp ** + +- global variables in the SYNOPSIS of section 3 pages + .Vt vs .Vt/.Va vs .Ft/.Va vs .Ft/.Fa ... + from kristaps@ Tue, 08 Jun 2010 11:13:32 +0200 + +- implicit whitespace around inline equations + example code: where '$times$' denotes matrix multiplication + must not have an HTML line break, nor a blank, before + partial solution: html.c {"math", HTML_NLINSIDE | HTML_INDENT}, + bentley@ Thu, 13 Jul 2017 19:00:59 -0600 + - in enclosures, mandoc sometimes fancies a bogus end of sentence reminded by jmc@ Thu, 23 Sep 2010 18:13:39 +0059 + loc * exist ** algo *** size * imp *** +- a line starting with "\fB something" counts as starting with whitespace + and triggers a line break; found in audio/normalize-mp3(1) + This will become easier once escape sequences are represented + by syntax tree nodes. + loc ** exist * algo ** size * imp ** + +- formatting /usr/local/man/man1/latex2man.1 with groff and mandoc + reveals lots of bugs both in groff and mandoc... + reported by bentley@ Wed, 22 May 2013 23:49:30 -0600 + +--- PostScript and PDF issues ------------------------------------------ + +- PDF output doesn't use a monospaced font for .Bd -literal + Example: "mandoc -Tpdf afterboot.8 > output.pdf && pdfviewer output.pdf". + Search the text "Routing tables". + Also check what PostScript mode does when fixing this. + reported by juanfra@ Wed, 04 Jun 2014 21:44:58 +0200 + instructions from juanfra@ Wed, 11 Jun 2014 02:21:01 +0200 + add a new <> block to the PDF files with /BaseFont /Courier + and change the /Name from /F0 to the new font (/F5 (?)). + re-reported by tb@ Mon, 16 Mar 2015 16:47:21 +0100 + loc ** exist ** algo ** size * imp ** + +--- HTML issues -------------------------------------------------------- + +- .Aq Mt could set and reset "white-space: nowrap"; + Check whether other enclosure macros could profit from similar handling, + or whether that is covered by Unicode line-breaking classes WJ, ZW, GL, ZWJ. + John Gardner 25 Mar 2022 04:44:27 +1100 + +- make the HTML scaffolding customizable with -O skip=... + mail to Oliver Corff 3 Jun 2021 17:28:02 +0200 + more feedback from Oliver 3 Jun 2021 18:27:56 +0200 + more feedback from Oliver 3 Jun 2021 23:37:18 +0200 + +- .Bd -unfilled should not use monospaced font + anton@ 4 Mar 2021 08:19:35 +0100 + loc ** exist * algo * size * imp ** + +- HTML formatting of .nf should avoid
+ and not close and re-open
 on .P
+  my mail to ports@ 27 Jun 2021 16:09:20 +0200
+  loc **  exist **  algo *  size *  imp **
+
+- tbl(7) HTML output does not implement column width specifications
+  reported by Ted Bullock 11 Jan 2022 16:00:44 -0700
+  loc *  exist *  algo ?  size ?  imp *
+
+- get rid of the last handful of style= attributes such that
+  Content-Security-Policy: can be enabled without unsafe-inline
+  suggested by bentley@  Nov 10, 2019 at 06:02:49AM -0700
+  loc *  exist *  algo *  size *  imp **
+
+- .Bf at the beginning of a paragraph inserts a bogus 1ex horizontal
+  space, see for example random(3).  Introduced in
+  http://mdocml.bsd.lv/cgi-bin/cvsweb/mdoc_html.c.diff?r1=1.91&r2=1.92
+  reported by deraadt@ Mon, 28 Sep 2015 20:14:13 -0600 (MDT)
+  loc **  exist **  algo **  size *  imp *
+
+- jsg on icb, Nov 3, 2014:
+  try to guess Xr in man(7) for hyperlinking
+  and render them with 
+  https://github.com/Debian/debiman/issues/15
+  loc *  exist *  algo **  size **  imp **
+
+- space characters can end up in href= attributes, for example coming
+  from the first .Xr argument (where they make no sense, but still);
+  does this affect other characters, other source macros...?
+  Jackson Pauls  29 Aug 2017 16:56:27 +0100
+
+- The tables used to render the three-part page headers actually force
+  the width of the  to the max-width given for .
+  Not yet sure how to fix that...
+  Observed by an Anonymous Coward on undeadly.org:
+  http://undeadly.org/cgi?action=article&sid=20140925064244&pid=1
+  loc *  exist *  algo **  size *  imp ***
+
+- generate  tags in HTML
+  idea from florian@  Tue, 7 Apr 2015 00:26:28 +0000
+  may be possible to implement with .Lk img://something.png alt_text
+
+- check https://github.com/trentm/mdocml
+
+--- CSS issues ---------------------------------------------------------
+
+- use flexbox for .Bl-tag instead of the fragile float/clear mechanism
+  John Gardner 25 Mar 2022 04:44:27 +1100
+
+
 ************************************************************************
-* formatting issues: gratuitious differences
+* formatting issues: gratuitous differences
 ************************************************************************
 
-- .Rv (and probably .Ex) print different text if an `Nm' has been named
-  or not (run a manual without `Nm blah' to see this).  I'm not sure
-  that this exists in the wild, but it's still an error.
+- .Fn reopens a new scope after punctuation in mandoc,
+  but closes its scope for good in groff.
+  Do we want to change mandoc or groff?
+  Steffen Nurpmeso  Sat, 08 Nov 2014 13:34:59 +0100
+  loc *  exist **  algo **  size *  imp **
 
-- In .Bl -bullet, the groff bullet is "+\b+\bo\bo", the mandoc bullet
-  is just "o\bo".
-  see for example OpenBSD ksh(1)
+- In .Bl -enum -width 0n, groff continues one the same line after
+  the number, mandoc breaks the line.
+  mail to kristaps@  Mon, 20 Jul 2009 02:21:39 +0200
+  loc *  exist **  algo **  size *  imp **
 
-- The characters "|" and "\*(Ba" should never be bold,
-  not even in the middle of a word, e.g. ".Cm b\*(Bac" in
-  "mknod [-m mode] name b|c major minor"
-  in OpenBSD ksh(1)
+- .Pp between two .It in .Bl -column should produce one,
+  not two blank lines, see e.g. login.conf(5).
+  reported by jmc@  Sun, 17 Apr 2011 14:04:58 +0059
+  reported again by sthen@  Wed, 18 Jan 2012 02:09:39 +0000 (UTC)
+  loc *  exist ***  algo **  size *  imp **
 
-- A bogus .Pp between two .It must not produce a double blank line,
-  see between -R and -r in OpenBSD rm(1), before "update" in mount(8),
-  or in DIAGNOSTICS in init(8), or before "is always true" in ksh(1).
-  The same happens with .Pp just before .El, see bgpd.conf(5).
-  Also have `It' complain if `Pp' is invoked at certain times (not
-  -compact?).
-
 - If the *first* line after .It is .Pp, break the line right after
   the tag, do not pad with space characters before breaking.
   See the description of the a, c, and i commands in sed(1).
+  loc *  exist **  algo **  size *  imp **
 
 - If the first line after .It is .D1, do not assert a blank line
   in between, see for example tmux(1).
   reported by nicm@  13 Jan 2011 00:18:57 +0000
+  loc *  exist **  algo **  size *  imp **
 
-- .Nx 1.0a
-  should be "NetBSD 1.0A", not "NetBSD 1.0a",
-  see OpenBSD ccdconfig(8).
+- Trailing punctuation after .It should trigger EOS spacing.
+  reported by Nicolas Joly  Sat, 17 Nov 2012 11:49:54 +0100
+  Probably, this should be fixed somewhere in termp_it_pre(), not sure.
+  loc *  exist **  algo **  size *  imp **
 
-- In .Bl -tag, if a tag exceeds the right margin and must be continued
-  on the next line, it must be indented by -width, not width+1;
-  see "rule block|pass" in OpenBSD ifconfig(8).
-
 - When the -width string contains macros, the macros must be rendered
   before measuring the width, for example
     .Bl -tag -width ".Dv message"
   in magic(5), located in src/usr.bin/file, is the same
   as -width 7n, not -width 11n.
+  The same applies to .Bl -column column widths;
+  reported again by Nicolas Joly Thu, 1 Mar 2012 13:41:26 +0100 via wiz@ 5 Mar
+  reported again by Franco Fichtner Fri, 27 Sep 2013 21:02:28 +0200
+  reported again by Bruce Evans Fri, 17 Feb 2017 21:22:44 +0100 via bapt@
+  loc ***  exist ***  algo ***  size **  imp ***
+  An easy partial fix would be to just skip the first word if it starts
+  with a dot, including any following white space, when measuring.
+  loc *  exist *  algo *  size *  imp ***
 
 - The \& zero-width character counts as output.
   That is, when it is alone on a line between two .Pp,
   we want three blank lines, not two as in mandoc.
+  loc **  exist **  algo **  size *  imp **
 
-- When .Fn arguments exceed one output line, all but the first
-  should be indented, see e.g. rpc(3);
-  reported by jmc@ on discuss@  Fri, 29 Oct 2010 13:48:33 +0100
+- Sequences of multiple man(7) paragraphs (.PP, .IP) interspersed
+  with .ps and .nf/.fi produce execessive blank lines, see libJudy
+  and graphics/dcmtk.  The parser reorg may help with this.
 
-- .Ns should work when called at the end of an input line, see
-  the following code in vi(1):
-    .It Xo
-    .Op Ar line
-    .Cm a Ns Op Cm ppend Ns
-    .Op Cm !\&
-    .Xc
-    The input text is appended after the specified line.
+- trailing whitespace must be ignored even when followed by a font escape,
+  see for example
+    makes
+    \fBdig \fR
+    operate in batch mode
+  in dig(1).
+  loc **  exist **  algo **  size *  imp **
 
-- Header lines of excessive length:
-  Port OpenBSD man_term.c rev. 1.25 to mdoc_term.c
-  and document it in mdoc(7) and man(7) COMPATIBILITY
-  found while talking to Chris Bennett
+************************************************************************
+* warning issues
+************************************************************************
 
-- In man(7), the sequence
-    .HP
-    one line of regular text
-    .SH
-  should not produce two blank lines before the .SH,
-  see for example named-checkconf(8).
+- shorten/simplify error messages for usage errors
+  To: deraadt@ 25 Oct 2020 23:37:01 +0100
+  loc **  exist *  algo *  size **  imp ***
 
-- In man(7), the sequence
-    regular text
-    .RS
-    .IP
-  should have a blank line between the text and the beginning of the
-  indented paragraph, see for example sudo(1).
+- warn about duplicate .Sh/.Ss heads
+  gre(4): Rename duplicate sections 20 Apr 2018 15:27:33 +0200
+  loc *  exist *  algo *  size *  imp **
 
-- In man(7), the sequence
-    .SH HEADER
-    
-    .PP
-    regular text
-  should not produce any blank lines between the header and the text,
-  see for example rsync(1).
-  Reported by naddy@  Mon, 28 Mar 2011 20:45:42 +0200
+- style message about macros inside .Bd -literal and .Dl, in particular
+  font changing macros like .Cm, .Ar, .Fa (from the mdoclint TODO)
 
-- In man(7), the sequence
-    regular text
-    .PP
-    .RS
-    indented text
-  should produce one blank line between the regular and indented texts,
-  see for example rsync(1), and
-    .RE
-    
-    .PP
-    .RS
-  should produce two,not one blank lines.
-  Reported by naddy@  Mon, 28 Mar 2011 20:45:42 +0200
+- style message about mismatches between the section number in the
+  file name (if it is known) and the section number in .Dt
+  (from the mdoclint TODO)
 
-- In man(7), the sequence
-    regular text
-    .IP
-    .IP "tag"
-    indented text
-  should produce one, not four blank lines between the regular text
-  and the tag, see for example rsync(1).
-  Likewise,
-    regular text
-    .IP
-    indented text
-  should produce one, not two blank lines in between, and
-    regular text
-    .IP
-    .RS
-    .IP tag
-    indented text
-  should produce one, not three blank lines.
-  Reported by naddy@  Mon, 28 Mar 2011 20:45:42 +0200
+- style message about NULL without .Dv (from the mdoclint TODO)
 
-- At least sometimes, .sp is ignored right after .SH; see named.conf(5).
+- style message about error constants without .Er (from the mdoclint TODO)
 
-- trailing whitespace must be ignored even when followed by a font escape,
-  see for example 
-    makes
-    \fBdig \fR
-    operate in batch mode
-  in dig(1).
+- warn when .Sh or .Ss contain other macros
+  Steffen Nurpmeso, savannah.gnu.org/bugs/index.php?45034
+  loc *  exist *  algo *  size *  imp **
 
-************************************************************************
-* error reporting issues
-************************************************************************
+- style message about violations of the convention
+  .An name Aq Mt localpart@domain in AUTHORS (from the mdoclint TODO)
 
+- warn about attempts to call non-callable macros
+  Steffen Nurpmeso  Tue, 11 Nov 2014 22:55:16 +0100
+  Note that formatting is inconsistent in groff.
+  .Fn Po prints "Po()", .Ar Sh prints "file ..." and no "Sh".
+  Relatively hard because the relevant code is scattered
+  all over mdoc_macro.c and all subtly different.
+  loc **  exist **  algo **  size **  imp **
+
+- warn about punctuation - e.g. ',' and ';' - at the beginning
+  of a text line, if it is likely intended to follow the preceding
+  output without intervening whitespace, in particular after a
+  macro line (from the mdoclint TODO)
+
+- report double .TH in man(7) as an ERROR and let the first win
+  kristaps@  28 Mar 2021 13:30:41 +0200
+  loc *  exist *  algo *  size *  imp *
+
+- makewhatis -p complains about language subdirectories:
+  /usr/local/man//ru: Unknown directory part
+
+
 ************************************************************************
-* performance issues
+* documentation issues
 ************************************************************************
 
-Several areas can be cleaned up to make mandoc even faster.  These are 
+- mark macros as: page structure domain, manual domain, general text domain
+  is this useful?
 
-- improve hashing mechanism for macros (quite important: performance)
+- mention /usr/share/misc/mdoc.template in mdoc(7)?
 
-- improve hashing mechanism for characters (not as important)
+- Is all the content from http://www.std.com/obi/BSD/doc/usd/28.tbl/tbl
+  covered in tbl(7)?
 
+************************************************************************
+* performance issues
+************************************************************************
+
 - the PDF file is HUGE: this can be reduced by using relative offsets
 
 ************************************************************************
 * structural issues
 ************************************************************************
 
+- POSIX says in the documentation of sysconf(3) that PATH_MAX
+  is allowed to be so large that it is a bad idea to use it
+  for sizing static buffers.  So use dynamic buffers throughout.
+  See the file test-PATH_MAX.c for details.
+  Found by Aaron M. Ucko in the GNU Hurd via Bdale Garbee,
+  https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=829624
+
+- Is it possible to further simplify ENDBODY_SPACE?
+
 - Find better ways to prevent endless loops
   in roff(7) macro and string expansion.
- 
-- Finish cleanup of date handling.
-  Decide which formats should be recognized where.
-  Update both mdoc(7) and man(7) documentation.
-  Triggered by  Tim van der Molen  Tue, 22 Feb 2011 20:30:45 +0100
+
+- make buffers for parsing functions const
+  christos@ via wiz@  Fri, 18 Dec 2015 17:10:01 +0100
+
+- struct mparse refactoring
+  Steffen Nurpmeso  Thu, 04 Sep 2014 12:50:00 +0200
+
+************************************************************************
+* CGI issues
+************************************************************************
+
+ - Inspect httpd(8) logs on man.openbsd.org and consider
+   whether logging can be improved, where bad syntax comes from,
+   and what needs to be done to get rid of COMPAT_OLDURI.
+ - Enable HTTP compression by detecting gzip encoding and filtering
+   output through libz.
+ - Privilege separation (see OpenSSH).
+ - Enable caching support via HTTP 304 and If-Modified-Since.
+
+************************************************************************
+* to improve in the groff_mdoc(7) macros
+************************************************************************
+
+- delete OS release verification from .Dx, .Fx, .Nx, .Ox etc.
+  https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=629161
+  also Branden Robinson 18 Dec 2019 00:59:52 +1100
+
+- Can the distinction between .Vt and .Va be made stricter,
+  recommending .Vt extern char * Ns Va optarg ; ?
+  What about the block macro properties of .Vt in the SYNOPSIS?
+  zeurkous 25 Dec 2019 08:48:36 +0100
+
+- .Cd # arch1, arch2 in section 4 pages:
+  find better way to indicate multiple architectures, maybe:
+  allow .Dt vgafb 4 "macppc sparc64"
+  already shown as "Device Drivers Manual (macppc sparc64)"
+  for apropos, make that "vgafb(4) - macppc # sparc64" instead of "- all"
+  groff can be made to show multiple arches, too, but it is
+  tedious to do the string parsing in roff code...
+  jmc@ 23 Apr 2018 07:24:52 +0100 [man for vgafb(4)...]
+  loc **  exist **  algo *  size *  imp ***
+
+- use uname(1) to set doc-default-operating-system at install time
+  tobimensch  Mon, 1 Dec 2014 00:25:07 +0100
+
+- apostrophe (39), circumflex (94), grave (96), tilde (126)
+  in manuals: \(aq, \(ha, \`, \(ti
+  Re: [Groff] ASCII Minus Sign in man Pages.
+  bentley@ 26 Apr 2017 10:02:06 -0600
+  Do we need to fix existing manuals?
+  Do we need to fix the definition of the mdoc(7) language?