[BACK]Return to TODO CVS log [TXT][DIR] Up to [cvsweb.bsd.lv] / mandoc

Diff for /mandoc/TODO between version 1.85 and 1.274

version 1.85, 2011/01/25 15:17:18 version 1.274, 2018/10/25 21:23:52
Line 3 
Line 3 
 * $Id$  * $Id$
 ************************************************************************  ************************************************************************
   
 ************************************************************************  Many issues are annotated for difficulty as follows:
 * parser bugs  
 ************************************************************************  
   
 - .TP before .SH is still FATAL in man(7)   - loc = locality of the issue
   reported by brad@  Sat, 15 Jan 2011 15:54:54 -0500      *    single file issue, affects file only, or very few
       **   single module issue, affects several files of one module
       ***  cross-module issue, significantly impacts multiple modules
            and may require substantial changes to internal interfaces
    - exist = difficulty of the existing code in this area
       *    affected code is straightforward and easy to read and change
       **   affected code is somewhat complex, but once you understand
            the design, not particularly difficult to understand
       ***  affected code uses a special, exceptionally tricky design
    - algo = difficulty of the new algorithm to be written
       *    the required logic and code is straightforward
       **   the required logic is somewhat complex and needs a careful design
       ***  the required logic is exceptionally tricky,
            maybe an approach to solve that is not even known yet
    - size = the amount of code to be written or changed
       *    a small number of lines (at most 100, usually much less)
       **   a considerable amount of code (several dozen to a few hundred)
       ***  a large amount of code (many hundreds, maybe thousands)
    - imp = importance of the issue
       *    mostly for completeness
       **   would be nice to have
       ***  issue causes considerable inconvenience
   
 - The mdoc(7) parser should handle `\.' as punctuation:  Obviously, as the issues have not been solved yet, these annotations
     .Ql .if ${VAR} op something \.  are mere guesses, and some may be wrong.
   should produce  
     `.if ${VAR} op something'.  
   not  
     `.if ${VAR} op something .'  
   as seen in make(1).  
   To escape the dot, one would use `\&.'.  
   
 - the roff parser doesn't tolerate additional characters between  
   a macro and the \} terminating a conditional block, e.g.  
   .if n \{  
   .br \}  
   reported by ulrich spoerlein  Tue, 19 Oct 2010 20:39:50 +0200  
   
 ************************************************************************  ************************************************************************
 * formatter bugs  
 ************************************************************************  
   
 ************************************************************************  
 * missing features  * missing features
 ************************************************************************  ************************************************************************
   
Line 43 
Line 46 
   .na   -- temporarily disable adjustment without changing the mode    .na   -- temporarily disable adjustment without changing the mode
   .ad   -- re-enable adjustment without changing the mode    .ad   -- re-enable adjustment without changing the mode
   Adjustment mode is ignored while in no-fill mode (.nf).    Adjustment mode is ignored while in no-fill mode (.nf).
     loc ***  exist ***  algo **  size **  imp **  (parser reorg would help)
   
 - .it (line traps) occur in mysql(1), yasm_arch(7)  - .fc (field control)
   generated by DocBook XSL Stylesheets v1.71.1 <http://docbook.sf.net/>    found by naddy@ in xloadimage(1)
   reported by brad@  Sat, 15 Jan 2011 15:48:18 -0500    loc **  exist ***  algo *  size *  imp *
   
 - .ns (no-space mode) occurs in xine-config(1)  - .ns (no-space mode) occurs in xine-config(1)
     when implementing this, also let .TH set it
   reported by brad@  Sat, 15 Jan 2011 15:45:23 -0500    reported by brad@  Sat, 15 Jan 2011 15:45:23 -0500
     loc ***  exist ***  algo ***  size **  imp *
   
 - xloadimage(1) wants .ti (temporary indent), rep by naddy@  - \w'' improve width measurements
     would not be very useful without an expression parser, see below
     needed for Tcl_NewStringObj(3) via wiz@  Wed, 5 Mar 2014 22:27:43 +0100
     loc **  exist ***  algo ***  size *  imp ***
   
 - .ta (tab settings) occurs in ircbug(1) and probably gnats(1)  - \\ in high-level macro arguments
   reported by brad@  Sat, 15 Jan 2011 15:50:51 -0500    Currently, \\ is expanded in two situations:
     1) macro and string definition (roff.c setstrn())
     2) macro argument parsing (mandoc.c mandoc_getarg())
     For user defined macros, the second happens in time because of ROFF_REPARSE.
     But for standard high-level macros, it only happens after entering the
     high level parsers, which is too late because the code doesn't get
     back to roff.c roff_res() from that point.  Because this requires
     distinguishing requests, user-defined macros and standard macros
     on the roff_res() level, it is hard to solve without the parser reorg.
     Found by naddy@ in devel/cutils cobfusc(1)  Mon, 16 Feb 2015 19:10:52 +0100
     loc ***  exist ***  algo ***  size **  imp *
   
 - pod2man expects `tr' to be implemented for \*(-- to work  - check for missing roff escape sequences, implement those that are
     trivial even if not usually appearing in manual pages, gracefully
     ignore the non-trivial ones, document what they are supposed to do
     and what mandoc does instead
     loc *  exist **  algo *  size *  imp *
   
 - \c (interrupted text) occurs in chat(8)  
   
 --- missing mdoc features ----------------------------------------------  --- missing mdoc features ----------------------------------------------
   
 - fix bad block nesting involving multiple identical explicit blocks  
   see the OpenBSD mdoc_macro.c 1.47 commit message  
   
 - .Bl -column .Xo support is missing  - .Bl -column .Xo support is missing
   ultimate goal:    ultimate goal:
   restore .Xr and .Dv to    restore .Xr and .Dv to
   lib/libc/compat-43/sigvec.3    lib/libc/compat-43/sigvec.3
   lib/libc/gen/signal.3    lib/libc/gen/signal.3
   lib/libc/sys/sigaction.2    lib/libc/sys/sigaction.2
     loc *  exist ***  algo ***  size *  imp **
   
 - edge case: decide how to deal with blk_full bad nesting, e.g.  - edge case: decide how to deal with blk_full bad nesting, e.g.
   .Sh .Nm .Bk .Nm .Ek .Sh found by jmc@ in ssh-keygen(1)    .Sh .Nm .Bk .Nm .Ek .Sh found by jmc@ in ssh-keygen(1)
   from jmc@  Wed, 14 Jul 2010 18:10:32 +0100    from jmc@  Wed, 14 Jul 2010 18:10:32 +0100
     loc *  exist ***  algo ***  size **  imp **
   
 - \\ is now implemented correctly  - .Bd -centered implies -filled, not -unfilled, which is not
   * when defining strings and macros using .ds and .de    easy to implement; it requires code similar to .ce, which
   * when parsing roff(7) and man(7) macro arguments    we don't have either.
   It does not yet work in mdoc(7) macro arguments    Besides, groff has bug causing text right *before* .Bd -centered
   because libmdoc does not yet use mandoc_getarg().    to be centered as well.
   Also check what happens in plain text, it must be identical to \e.    loc ***  exist ***  algo **  size **  imp **  (parser reorg would help)
   
 - .Bd -filled should not be the same as .Bd -ragged, but align both  - .Bd -filled should not be the same as .Bd -ragged, but align both
   the left and right margin.  In groff, it is implemented in terms    the left and right margin.  In groff, it is implemented in terms
   of .ad b, which we don't have either.  Found in cksum(1).    of .ad b, which we don't have either.  Found in cksum(1).
     loc ***  exist ***  algo **  size **  imp **  (parser reorg would help)
   
 - implement blank `Bl -column', such as  - implement blank `Bl -column', such as
   .Bl -column    .Bl -column
   .It foo Ta bar    .It foo Ta bar
   .El    .El
     loc *  exist ***  algo ***  size *  imp *
   
 - explicitly disallow nested `Bl -column', which would clobber internal  - explicitly disallow nested `Bl -column', which would clobber internal
   flags defined for struct mdoc_macro    flags defined for struct mdoc_macro
     loc *  exist *  algo *  size *  imp **
   
   - In .Bl -column .It, the end of the line probably has to be regarded
     as an implicit .Ta, if there could be one, see the following mildly
     ugly code from login.conf(5):
       .Bl -column minpasswordlen program xetcxmotd
       .It path Ta path Ta value of Dv _PATH_DEFPATH
       .br
       Default search path.
     reported by Michal Mazurek <akfaew at jasminek dot net>
     via jmc@ Thu, 7 Apr 2011 16:00:53 +0059
     loc *  exist ***  algo **  size *  imp **
   
 - inside `.Bl -column' phrases, punctuation is handled like normal  - inside `.Bl -column' phrases, punctuation is handled like normal
   text, e.g. `.Bl -column .It Fl x . Ta ...' should give "-x -."    text, e.g. `.Bl -column .It Fl x . Ta ...' should give "-x -."
   
Line 102 
Line 136 
   is not safe, e.g. `.Bl -column .It Pf a b .' gives "ab."    is not safe, e.g. `.Bl -column .It Pf a b .' gives "ab."
   but should give "ab ."    but should give "ab ."
   
 - set a meaningful default if no `Bl' list type is assigned  
   
 - have a blank `It' head for `Bl -tag' not puke  
   
 - prohibit `Nm' from having non-text HEAD children  - prohibit `Nm' from having non-text HEAD children
   (e.g., NetBSD mDNSShared/dns-sd.1)    (e.g., NetBSD mDNSShared/dns-sd.1)
   (mdoc_html.c and mdoc_term.c `Nm' handlers can be slightly simplified)    (mdoc_html.c and mdoc_term.c `Nm' handlers can be slightly simplified)
   
 --- missing man features -----------------------------------------------  - support translated section names
     e.g. x11/scrotwm scrotwm_es.1:21:2: error: NAME section must be first
     that one uses NOMBRE because it is spanish...
     deraadt tends to think that section-dependent macro behaviour
     is a bad idea in the first place, so this may be irrelevant
     loc **  exist **  algo **  size *  imp **
   
 - bashbug(1) complains "line scope broken" after  - When there is free text in the SYNOPSIS and that free text contains
   .SM    the .Nm macro, groff somehow understands to treat the .Nm as an in-line
   .B something    macro, while mandoc treats it as a block macro and breaks the line.
   should either just work or be a warning    No idea how the logic for distinguishing in-line and block instances
   reported by naddy@    should be, needs investigation.
     uqs@  Thu, 2 Jun 2011 11:03:51 +0200
     uqs@  Thu, 2 Jun 2011 11:33:35 +0200
     loc *  exist **  algo ***  size *  imp **
   
 - groff an-ext.tmac macros (.UR, .UE) occur in xine(5)  --- missing man features -----------------------------------------------
   reported by brad@  Sat, 15 Jan 2011 15:45:23 -0500  
   
   - groff_www(7) .MTO and .URL
     These macros were used by the GNU grep(1) man page.
     The groff_www(7) manual page itself uses them, too.
     We should probably *not* add them to mandoc.
     Just mentioning this here to keep track of the abuse.
     Laura Morales <lauretas at mail dot com> 20 Apr 2018 07:33:02 +0200
     loc **  exist *  algo *  size **  imp *
   
 --- missing tbl features -----------------------------------------------  --- missing tbl features -----------------------------------------------
   
 - implement basic non-parametric .de to support e.g. sox(1)  - the "s" layout column specifier is used for placement of data
   reported by naddy@ Sat, 16 Oct 2010 23:51:57 +0200    into columns, but ignored during column width calculations
   *** sox(1) still doesn't work, tbl(1) errors need investigation    synaptics(4) found by tedu@  Mon, 17 Aug 2015 21:17:42 -0400
     loc *  exist **  algo ***  size *  imp **
   
   - vertical centering in cells vertically spanned with ^
     pali dot rohar at gmail dot com 16 Jul 2018 13:03:35 +0200
     loc *  exist ***  algo ***  size **  imp *
   
   - support mdoc(7) and man(7) macros inside tbl(7) code;
     probably requires the parser reorg and letting tbl(7)
     use roff_node such that macro sets can mix;
     informed by bapt@ that FreeBSD needs this: 3 Jan 2015 23:32:23 +0100
     loc ***  exist **  algo ***  size **  imp ***
   
   - look at the POSIX manuals in the books/man-pages-posix port,
     they use some unsupported tbl(7) features.
     loc *  exist **  algo **  size **  imp ***
   
   - look what Joerg Schilling manual pages use
     Thu, 19 Mar 2015 18:31:48 +0100
   
   - use Unicode U+2500 to U+256C for table borders
     in tbl(7) -Tutf-8 output
     suggested by bentley@  Tue, 14 Oct 2014 04:10:55 -0600
     loc *  exist **  algo *  size *  imp **
   
   - implement horizontal and vertical alignment in HTML output
     pali dot rohar at gmail dot com 16 Jul 2018 13:03:35 +0200
     loc *  exist *  algo *  size *  imp ***
   
   - implement cell spanning in HTML output
     pali dot rohar at gmail dot com 16 Jul 2018 13:03:35 +0200
     loc *  exist *  algo **  size **  imp **
   
   - implement table borders in HTML output
     pali dot rohar at gmail dot com 16 Jul 2018 13:03:35 +0200
     loc *  exist *  algo **  size **  imp **
   
   --- missing eqn features -----------------------------------------------
   
   - In a matrix, break the output line after each matrix line.
     Found in the discussion at CDBUG 2015.
     Suggested by Avi Weinstock.
     loc *  exist *  algo *  size *  imp **
   
   - The "size" keyword is parsed, but ignored by the formatter.
     loc *  exist *  algo *  size *  imp *
   
   - The spacing characters `~', `^', and tab are currently ignored,
     see User's Guide (Second Edition) page 2 section 4.
     loc *  exist *  algo **  size *  imp **
   
   - Mark and lineup are parsed and ignored,
     see User's Guide (Second Edition) page 5 section 15.
     loc **  exist **  algo **  size **  imp **
   
   - GNU eqn converts some operators to special characters, for example,
     input HYPHEN-MINUS becomes output \(mi, unless it is part of a
     quoted word.  mandoc(1) only does this when the operator is
     surrounded by blanks, not when it is part of an unquoted word.
     Also, check whether there are more such cases (e.g., +?).
     reported by bentley@  20 Jun 2017 02:04:29 -0600
     loc *  exist **  algo **  size *  imp *
   
   - Primes, opprime, and '
     bentley@  Thu, 13 Jul 2017 23:14:20 -0600
   
 --- missing misc features ----------------------------------------------  --- missing misc features ----------------------------------------------
   
   - man -ks 1,8 route; kn@ Jul 13, 2018 orally
   
   - italic correction (\/) in PostScript mode
     Werner LEMBERG on groff at gnu dot org  Sun, 10 Nov 2013 12:47:46
     loc **  exist **  algo *  size *  imp *
   
   - change the default PAGER to more -Es and use the pager
     even for apropos title line output; req by bapt@
     loc *  exist *  algo *  size *  imp ***
   
 - clean up escape sequence handling, creating three classes:  - clean up escape sequence handling, creating three classes:
   (1) fully implemented, or parsed and ignored without loss of content    (1) fully implemented, or parsed and ignored without loss of content
   (2) unimplemented, potentially causing loss of content    (2) unimplemented, potentially causing loss of content
       or serious mangling of formatting (e.g. \n) -> ERROR        or serious mangling of formatting (e.g. \n) -> ERROR
       see textproc/mgdiff(1) for nice examples        see textproc/mgdiff(1) for nice examples
   (3) undefined, just output the character -> perhaps WARNING    (3) undefined, just output the character -> perhaps WARNING
     loc ***  exist **  algo **  size **  imp *** (parser reorg helps)
   
 - The \t escape sequence is the same as a literal tab, see for example  - kettenis wants base roff, ms, and me  Fri, 1 Jan 2010 22:13:15 +0100 (CET)
   the ASCII table in hexdump(1) where    loc **  exist **  algo **  size ***  imp *
     .Bl -column \&000_nu \&001_so \&002_st \&003_et \&004_eo  
     .It \&000\ nul\t001\ soh\t002\ stx\t003\ etx\t004\ eot\t005\ enq  
   produces  
     000 nul  001 soh  002 stx  003 etx  004 eot  005 enq  
   and the example in oldrdist(1)  
   
   --- compatibility checks -----------------------------------------------
   
   - is .Bk implemented correctly in modern groff?
     sobrado@  Tue, 19 Apr 2011 22:12:55 +0200
   
   - compare output to Heirloom roff, Solaris roff, and
     http://repo.or.cz/w/neatroff.git  http://litcave.rudi.ir/
   
   - look at AT&T DWB http://www2.research.att.com/sw/download
     Carsten Kunze <carsten dot kunze at arcor dot de> has patches
     Mon, 4 Aug 2014 17:01:28 +0200
     ported version: https://github.com/n-t-roff/DWB3.3
     Carsten Kunze  Wed, 22 Apr 2015 11:21:43 +0200
   
 - look at pages generated from reStructeredText, e.g. devel/mercurial hg(1)  - look at pages generated from reStructeredText, e.g. devel/mercurial hg(1)
   These are a weird mixture of man(7) and custom autogenerated low-level    These are a weird mixture of man(7) and custom autogenerated low-level
   roff stuff.  Figure out to what extent we can cope.    roff stuff.  Figure out to what extent we can cope.
Line 151 
Line 280 
   noted by stsp@  Sat, 24 Apr 2010 09:17:55 +0200    noted by stsp@  Sat, 24 Apr 2010 09:17:55 +0200
   reminded by nicm@  Mon, 3 May 2010 09:52:41 +0100    reminded by nicm@  Mon, 3 May 2010 09:52:41 +0100
   
   - look at pages generated from ronn(1) github.com/rtomayko/ronn
     (based on markdown)
   
   - look at pages generated from Texinfo source by yat2m, e.g. security/gnupg
     First impression is not that bad.
   
   - look at pages generated by pandoc; see
     https://github.com/jgm/pandoc/blob/master/src/Text/Pandoc/Writers/Man.hs
     porting planned by kili@  Thu, 19 Jun 2014 19:46:28 +0200
   
 - check compatibility with Plan9:  - check compatibility with Plan9:
   http://swtch.com/usr/local/plan9/tmac/tmac.an    http://swtch.com/usr/local/plan9/tmac/tmac.an
   http://swtch.com/plan9port/man/man7/man.html    http://swtch.com/plan9port/man/man7/man.html
   "Anthony J. Bentley" <anthonyjbentley@gmail.com> 28 Dec 2010 21:58:40 -0700    "Anthony J. Bentley" <anthonyjbentley@gmail.com> 28 Dec 2010 21:58:40 -0700
   
   - check compatibility with COHERENT troff:
     http://www.nesssoftware.com/home/mwc/source.php
   
   - check compatibility with the man(7) formatter
     https://raw.githubusercontent.com/rofl0r/hardcore-utils/master/man.c
   
   - check compatibility with
     http://ikiwiki.info/plugins/contrib/mandoc/
     https://github.com/schmonz/ikiwiki/compare/mandoc
     Amitai Schlair  Mon, 19 May 2014 14:05:53 -0400
   
   - check features of the Slackware man.conf(5) format
     Carsten Kunze  Wed, 11 Mar 2015 17:57:24 +0100
   
 ************************************************************************  ************************************************************************
 * formatting issues: ugly output  * formatting issues: ugly output
 ************************************************************************  ************************************************************************
   
 - double quotes inside double quotes are escaped by doubling them  - revisit empty in-line macros
   implement this in mdoc(7), too    look at the difference between "Em x Em ." and "Sq x Em ."
   so far, we only have it in roff(7) and man(7)    Carsten Kunze  Fri, 12 Dec 2014 00:15:41 +0100
   reminded by millert@  Thu, 09 Dec 2010 17:29:52 -0500    loc *** exist *** algo *** size * imp **
   
 - perl(1) SYNOPSIS looks bad; reported by deraadt@  - a column list with blank `Ta' cells triggers a spurious
   1) man(7) seems to need SYNOPSIS .Nm blocks, too    start-with-whitespace printing of a newline
   
   - In .Bl -column, .It a<tab>"b<tab>c"
     shows the quotes in groff, but not in mandoc
     loc * exist *** algo ** size * imp **
   
 - In .Bl -column,  - In .Bl -column,
   .It Em Authentication<tab>Key Length    .It Em Authentication<tab>Key Length
   ought to render "Key Length" with emphasis, too,    ought to render "Key Length" with emphasis, too,
   see OpenBSD iked.conf(5).    see OpenBSD iked.conf(5).
     reported again Nicolas Joly via wiz@ Wed, 12 Oct 2011 00:20:00 +0200
     loc *  exist ***  algo ***  size **  imp ***
   
 - empty phrases in .Bl column produce too few blanks  - empty phrases in .Bl column produce too few blanks
   try e.g. .Bl -column It Ta Ta    try e.g. .Bl -column It Ta Ta
   reported by millert Fri, 02 Apr 2010 16:13:46 -0400    reported by millert Fri, 02 Apr 2010 16:13:46 -0400
     loc *  exist ***  algo ***  size *  imp **
   
 - .%T can have trailing punctuation.  Currently, it puts the trailing  - .%T can have trailing punctuation.  Currently, it puts the trailing
   punctuation into a trailing MDOC_TEXT element inside its own scope.    punctuation into a trailing MDOC_TEXT element inside its own scope.
Line 185 
Line 345 
   slurp all arguments into one single text element - and one feature    slurp all arguments into one single text element - and one feature
   of in_line() - put trailing punctuation out of scope.    of in_line() - put trailing punctuation out of scope.
   Found in mount_nfs(8) and exports(5), search for "Appendix".    Found in mount_nfs(8) and exports(5), search for "Appendix".
     loc **  exist **  algo ***  size *  imp **
   
   - Trailing punctuation after .%T triggers EOS spacing, at least
     outside .Rs (eek!).  Simply setting ARGSFL_DELIM for .%T is not
     the right solution, it sends mandoc into an endless loop.
     reported by Nicolas Joly  Sat, 17 Nov 2012 11:49:54 +0100
     loc *  exist **  algo **  size *  imp **
   
   - global variables in the SYNOPSIS of section 3 pages
     .Vt vs .Vt/.Va vs .Ft/.Va vs .Ft/.Fa ...
     from kristaps@  Tue, 08 Jun 2010 11:13:32 +0200
   
   - implicit whitespace around inline equations
     example code:  where '$times$' denotes matrix multiplication
     must not have an HTML line break, nor a blank, before <math>
     partial solution: html.c {"math", HTML_NLINSIDE | HTML_INDENT},
     bentley@  Thu, 13 Jul 2017 19:00:59 -0600
   
 - in enclosures, mandoc sometimes fancies a bogus end of sentence  - in enclosures, mandoc sometimes fancies a bogus end of sentence
   reminded by jmc@  Thu, 23 Sep 2010 18:13:39 +0059    reminded by jmc@  Thu, 23 Sep 2010 18:13:39 +0059
     loc *  exist **  algo ***  size *  imp ***
   
   - a line starting with "\fB something" counts as starting with whitespace
     and triggers a line break; found in audio/normalize-mp3(1)
     loc **  exist *  algo **  size *  imp **
   
   - formatting /usr/local/man/man1/latex2man.1 with groff and mandoc
     reveals lots of bugs both in groff and mandoc...
     reported by bentley@  Wed, 22 May 2013 23:49:30 -0600
   
   --- PostScript and PDF issues ------------------------------------------
   
   - PDF output doesn't use a monospaced font for .Bd -literal
     Example: "mandoc -Tpdf afterboot.8 > output.pdf && pdfviewer output.pdf".
     Search the text "Routing tables".
     Also check what PostScript mode does when fixing this.
     reported by juanfra@ Wed, 04 Jun 2014 21:44:58 +0200
     instructions from juanfra@  Wed, 11 Jun 2014 02:21:01 +0200
       add a new <</Type /Font>> block to the PDF files with /BaseFont /Courier
       and change the /Name from /F0 to the new font (/F5 (?)).
     re-reported by tb@ Mon, 16 Mar 2015 16:47:21 +0100
     loc *  exist **  algo **  size *  imp **
   
   --- HTML issues --------------------------------------------------------
   
   - wrap Sh and Ss content into <div>
     Laura Morales <lauretas at mail dot com> 21 Apr 2018 18:10:48 +0200
     (Evaluate whether this is really useful and has no adverse
      side effects before implementing; if it is possible,
      it does seem cleaner.)
     loc **  exist **  algo *  size *  imp ***
   
   - .IP wants vertical spacing before itself;
     currently, it is formatted like .Bl -compact.
     Fixing this requires getting rid of the "float"
     in the CSS for .Bl-tag first.
     Reminded by Pali Rohar 25 Oct 2018 10:10:35 +0200.
   
   - format ".IP *" etc. as <ul> rather than <dl>
     https://github.com/Debian/debiman/issues/67
     loc ** exist ** algo ** size * imp ***
   
   - .Bf at the beginning of a paragraph inserts a bogus 1ex horizontal
     space, see for example random(3).  Introduced in
     http://mdocml.bsd.lv/cgi-bin/cvsweb/mdoc_html.c.diff?r1=1.91&r2=1.92
     reported by deraadt@ Mon, 28 Sep 2015 20:14:13 -0600 (MDT)
     loc **  exist **  algo **  size *  imp *
   
   - jsg on icb, Nov 3, 2014:
     try to guess Xr in man(7) for hyperlinking
     and render them with <a class="Xr" href=...>
     https://github.com/Debian/debiman/issues/15
     loc *  exist *  algo **  size **  imp **
   
   - The tables used to render the three-part page headers actually force
     the width of the <body> to the max-width given for <html>.
     Not yet sure how to fix that...
     Observed by an Anonymous Coward on undeadly.org:
     http://undeadly.org/cgi?action=article&sid=20140925064244&pid=1
     loc *  exist *  algo **  size *  imp ***
   
   - generate <img> tags in HTML
     idea from florian@  Tue, 7 Apr 2015 00:26:28 +0000
     may be possible to implement with .Lk img://something.png alt_text
   
   - check https://github.com/trentm/mdocml
   
 ************************************************************************  ************************************************************************
 * formatting issues: gratuitious differences  * formatting issues: gratuitous differences
 ************************************************************************  ************************************************************************
   
 - .Rv (and probably .Ex) print different text if an `Nm' has been named  - .Fn reopens a new scope after punctuation in mandoc,
   or not (run a manual without `Nm blah' to see this).  I'm not sure    but closes its scope for good in groff.
   that this exists in the wild, but it's still an error.    Do we want to change mandoc or groff?
     Steffen Nurpmeso  Sat, 08 Nov 2014 13:34:59 +0100
     loc *  exist **  algo **  size *  imp **
   
 - In .Bl -bullet, the groff bullet is "+\b+\bo\bo", the mandoc bullet  - In .Bl -enum -width 0n, groff continues one the same line after
   is just "o\bo".    the number, mandoc breaks the line.
   see for example OpenBSD ksh(1)    mail to kristaps@  Mon, 20 Jul 2009 02:21:39 +0200
     loc *  exist **  algo **  size *  imp **
   
 - The characters "|" and "\*(Ba" should never be bold,  - .Pp between two .It in .Bl -column should produce one,
   not even in the middle of a word, e.g. ".Cm b\*(Bac" in    not two blank lines, see e.g. login.conf(5).
   "mknod [-m mode] name b|c major minor"    reported by jmc@  Sun, 17 Apr 2011 14:04:58 +0059
   in OpenBSD ksh(1)    reported again by sthen@  Wed, 18 Jan 2012 02:09:39 +0000 (UTC)
     loc *  exist ***  algo **  size *  imp **
   
 - A bogus .Pp between two .It must not produce a double blank line,  
   see between -R and -r in OpenBSD rm(1), before "update" in mount(8),  
   or in DIAGNOSTICS in init(8), or before "is always true" in ksh(1).  
   The same happens with .Pp just before .El, see bgpd.conf(5).  
   Also have `It' complain if `Pp' is invoked at certain times (not  
   -compact?).  
   
 - If the *first* line after .It is .Pp, break the line right after  - If the *first* line after .It is .Pp, break the line right after
   the tag, do not pad with space characters before breaking.    the tag, do not pad with space characters before breaking.
   See the description of the a, c, and i commands in sed(1).    See the description of the a, c, and i commands in sed(1).
     loc *  exist **  algo **  size *  imp **
   
 - If the first line after .It is .D1, do not assert a blank line  - If the first line after .It is .D1, do not assert a blank line
   in between, see for example tmux(1).    in between, see for example tmux(1).
   reported by nicm@  13 Jan 2011 00:18:57 +0000    reported by nicm@  13 Jan 2011 00:18:57 +0000
     loc *  exist **  algo **  size *  imp **
   
 - .Nx 1.0a  - Trailing punctuation after .It should trigger EOS spacing.
   should be "NetBSD 1.0A", not "NetBSD 1.0a",    reported by Nicolas Joly  Sat, 17 Nov 2012 11:49:54 +0100
   see OpenBSD ccdconfig(8).    Probably, this should be fixed somewhere in termp_it_pre(), not sure.
     loc *  exist **  algo **  size *  imp **
   
 - The space character joining .Dx .Fx .Nx .Ox (are these all?) to its  
   argument is non-breaking.  See the cdio(1) HISTORY and many others.  
   
 - In .Bl -tag, if a tag exceeds the right margin and must be continued  
   on the next line, it must be indented by -width, not width+1;  
   see "rule block|pass" in OpenBSD ifconfig(8).  
   
 - When the -width string contains macros, the macros must be rendered  - When the -width string contains macros, the macros must be rendered
   before measuring the width, for example    before measuring the width, for example
     .Bl -tag -width ".Dv message"      .Bl -tag -width ".Dv message"
   in magic(5), located in src/usr.bin/file, is the same    in magic(5), located in src/usr.bin/file, is the same
   as -width 7n, not -width 11n.    as -width 7n, not -width 11n.
     The same applies to .Bl -column column widths;
     reported again by Nicolas Joly Thu, 1 Mar 2012 13:41:26 +0100 via wiz@ 5 Mar
     reported again by Franco Fichtner Fri, 27 Sep 2013 21:02:28 +0200
     reported again by Bruce Evans Fri, 17 Feb 2017 21:22:44 +0100 via bapt@
     loc ***  exist ***  algo ***  size **  imp ***
     An easy partial fix would be to just skip the first word if it starts
     with a dot, including any following white space, when measuring.
     loc *  exist *  algo *  size *  imp ***
   
 - The \& zero-width character counts as output.  - The \& zero-width character counts as output.
   That is, when it is alone on a line between two .Pp,    That is, when it is alone on a line between two .Pp,
   we want three blank lines, not two as in mandoc.    we want three blank lines, not two as in mandoc.
     loc **  exist **  algo **  size *  imp **
   
 - When .Fn arguments exceed one output line, all but the first  - Sequences of multiple man(7) paragraphs (.PP, .IP) interspersed
   should be indented, see e.g. rpc(3);    with .ps and .nf/.fi produce execessive blank lines, see libJudy
   reported by jmc@ on discuss@  Fri, 29 Oct 2010 13:48:33 +0100    and graphics/dcmtk.  The parser reorg may help with this.
   
 - .Ns should only be effective when called by another macro,  
   not as a stand-alone macro at the beginning of a line;  
   see for example the awk(1) SYNOPSIS.  
   
 - .Ns should work when called at the end of an input line, see  
   the following code in vi(1):  
     .It Xo  
     .Op Ar line  
     .Cm a Ns Op Cm ppend Ns  
     .Op Cm !\&  
     .Xc  
     The input text is appended after the specified line.  
   
 - Header lines of excessive length:  
   Port OpenBSD man_term.c rev. 1.25 to mdoc_term.c  
   and document it in mdoc(7) and man(7) COMPATIBILITY  
   found while talking to Chris Bennett  
   
 - In man(7), the sequence  
     .HP  
     one line of regular text  
     .SH  
   should not produce two blank lines before the .SH,  
   see for example named-checkconf(8).  
   
 - In man(7), the sequence  
     regular text  
     .RS  
     .IP  
   should have a blank line between the text and the beginning of the  
   indented paragraph, see for example sudo(1).  
   
 - At least sometimes, .sp is ignored right after .SH; see named.conf(5).  
   
 - trailing whitespace must be ignored even when followed by a font escape,  - trailing whitespace must be ignored even when followed by a font escape,
   see for example    see for example
     makes      makes
     \fBdig \fR      \fBdig \fR
     operate in batch mode      operate in batch mode
   in dig(1).    in dig(1).
     loc **  exist **  algo **  size *  imp **
   
 ************************************************************************  ************************************************************************
 * error reporting issues  * warning issues
 ************************************************************************  ************************************************************************
   
   - When a man(1) command returns no result and there was an -S
     argument, check the -S argument against the list of valid
     architectures and say "Unknown architecture AAA" rather than
     "No entry for NNN in the manual" if there is no match.
     Requires moving the lists of valid architectures out of
     mdoc_validate.c such that they can be used by main.c.
     Discussed with jmc@ 10 Aug 2018 19:20:12 +0100.
     loc **  exist *  algo *  size *  imp **
   
   - warn about duplicate .Sh/.Ss heads
     gre(4): Rename duplicate sections 20 Apr 2018 15:27:33 +0200
     loc *  exist *  algo *  size *  imp **
   
   - style message about macros inside .Bd -literal and .Dl, in particular
     font changing macros like .Cm, .Ar, .Fa (from the mdoclint TODO)
   
   - style message about mismatches between the section number in the
     file name (if it is known) and the section number in .Dt
     (from the mdoclint TODO)
   
   - style message about NULL without .Dv (from the mdoclint TODO)
   
   - style message about error constants without .Er (from the mdoclint TODO)
   
   - warn when .Sh or .Ss contain other macros
     Steffen Nurpmeso, savannah.gnu.org/bugs/index.php?45034
     loc *  exist *  algo *  size *  imp **
   
   - style message about violations of the convention
     .An name Aq Mt localpart@domain in AUTHORS (from the mdoclint TODO)
   
   - warn about attempts to call non-callable macros
     Steffen Nurpmeso  Tue, 11 Nov 2014 22:55:16 +0100
     Note that formatting is inconsistent in groff.
     .Fn Po prints "Po()", .Ar Sh prints "file ..." and no "Sh".
     Relatively hard because the relevant code is scattered
     all over mdoc_macro.c and all subtly different.
     loc **  exist **  algo **  size **  imp **
   
   - style message about suspicious uses of - vs. \- vs. \(mi
     e.g. -1 is likely wrong (from the mdoclint TODO)
   
   - warn about punctuation - e.g. ',' and ';' - at the beginning
     of a text line, if it is likely intended to follow the preceding
     output without intervening whitespace, in particular after a
     macro line (from the mdoclint TODO)
   
   - mandoc_special does not really check the escape sequence,
     but just the overall format
     loc **  exist **  algo ***  size **  imp **
   
   - makewhatis -p complains about language subdirectories:
     /usr/local/man//ru: Unknown directory part
   
   
 ************************************************************************  ************************************************************************
 * performance issues  * documentation issues
 ************************************************************************  ************************************************************************
   
 Several areas can be cleaned up to make mandoc even faster.  These are  - dashes, hyphens, and minus signs in manual pages
     jmc@ Fri, 28 Mar 2014 07:19:27 +0000
   
 - improve hashing mechanism for macros (quite important: performance)  - mark macros as: page structure domain, manual domain, general text domain
     is this useful?
   
 - improve hashing mechanism for characters (not as important)  - mention /usr/share/misc/mdoc.template in mdoc(7)?
   
   - Is all the content from http://www.std.com/obi/BSD/doc/usd/28.tbl/tbl
     covered in tbl(7)?
   
   ************************************************************************
   * performance issues
   ************************************************************************
   
 - the PDF file is HUGE: this can be reduced by using relative offsets  - the PDF file is HUGE: this can be reduced by using relative offsets
   
 ************************************************************************  ************************************************************************
 * structural issues  * structural issues
 ************************************************************************  ************************************************************************
   
   - POSIX says in the documentation of sysconf(3) that PATH_MAX
     is allowed to be so large that it is a bad idea to use it
     for sizing static buffers.  So use dynamic buffers throughout.
     See the file test-PATH_MAX.c for details.
     Found by Aaron M. Ucko in the GNU Hurd via Bdale Garbee,
     https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=829624
   
   - We use the input line number at several places to distinguish
     same-line from different-line input.  That plainly doesn't work
     with user-defined macros, leading to random breakage.
   
   - Is it possible to further simplify ENDBODY_SPACE?
   
 - Find better ways to prevent endless loops  - Find better ways to prevent endless loops
   in roff(7) macro and string expansion.    in roff(7) macro and string expansion.
   
   - make buffers for parsing functions const
     christos@ via wiz@  Fri, 18 Dec 2015 17:10:01 +0100
   
   - struct mparse refactoring
     Steffen Nurpmeso  Thu, 04 Sep 2014 12:50:00 +0200
   
   ************************************************************************
   * CGI issues
   ************************************************************************
   
    - Enable HTTP compression by detecting gzip encoding and filtering
      output through libz.
    - Privilege separation (see OpenSSH).
    - Enable caching support via HTTP 304 and If-Modified-Since.
    - Have Mac OSX systems automatically disable -static compilation of the
      CGI: -static isn't supported.
   
   ************************************************************************
   * to improve in the groff_mdoc(7) macros
   ************************************************************************
   
   - .Cd # arch1, arch2 in section 4 pages:
     find better way to indicate multiple architectures, maybe:
     allow .Dt vgafb 4 "macppc sparc64"
     already shown as "Device Drivers Manual (macppc sparc64)"
     for apropos, make that "vgafb(4) - macppc # sparc64" instead of "- all"
     groff can be made to show multiple arches, too, but it is
     tedious to do the string parsing in roff code...
     jmc@ 23 Apr 2018 07:24:52 +0100 [man for vgafb(4)...]
     loc **  exist **  algo *  size *  imp ***
   
   - use uname(1) to set doc-default-operating-system at install time
     tobimensch  Mon, 1 Dec 2014 00:25:07 +0100
   
   - apostrophe (39), circumflex (94), grave (96), tilde (126)
     in manuals: \(aq, \(ha, \`, \(ti
     Re: [Groff] ASCII Minus Sign in man Pages.
     bentley@ 26 Apr 2017 10:02:06 -0600
     Do we need to fix existing manuals?
     Do we need to fix the definition of the mdoc(7) language?

Legend:
Removed from v.1.85  
changed lines
  Added in v.1.274

CVSweb