[BACK]Return to configure.local.example CVS log [TXT][DIR] Up to [cvsweb.bsd.lv] / mandoc

Diff for /mandoc/configure.local.example between version 1.19 and 1.41

version 1.19, 2016/08/02 11:09:46 version 1.41, 2021/09/19 16:19:09
Line 1 
Line 1 
 # $Id$  # $Id$
 #  #
 # Copyright (c) 2014, 2015, 2016 Ingo Schwarze <schwarze@openbsd.org>  # Copyright (c) 2014-2019 Ingo Schwarze <schwarze@openbsd.org>
 #  #
 # Permission to use, copy, modify, and distribute this software for any  # Permission to use, copy, modify, and distribute this software for any
 # purpose with or without fee is hereby granted, provided that the above  # purpose with or without fee is hereby granted, provided that the above
Line 20 
Line 20 
 # and put any of these settings into it if ./configure autodetection  # and put any of these settings into it if ./configure autodetection
 # fails or if you want to make different choices for other reasons.  # fails or if you want to make different choices for other reasons.
   
 # If autodetection fails, please tell <tech@mdocml.bsd.lv>.  # If autodetection fails, please tell <tech@mandoc.bsd.lv>.
   
 # We recommend that you write ./configure.local from scratch and  # We recommend that you write ./configure.local from scratch and
 # only put the lines there you need.  This file contains examples.  # only put the lines there you need.  This file contains examples.
Line 28 
Line 28 
   
 # --- user settings relevant for all builds ----------------------------  # --- user settings relevant for all builds ----------------------------
   
   # By default, "cc" is used as the C compiler, but it can be overridden.
   # For example, the system compiler in SunOS 5.9 may not provide <stdint.h>,
   # which may require this line:
   CC=gcc
   
   # IBM AIX may need:
   CC=xlc
   
 # For -Tutf8 and -Tlocale operation, mandoc(1) requires <locale.h>  # For -Tutf8 and -Tlocale operation, mandoc(1) requires <locale.h>
 # providing setlocale(3) and <wchar.h> providing wcwidth(3) and  # providing setlocale(3) and <wchar.h> providing wcwidth(3) and
 # putwchar(3) with a wchar_t storing UCS-4 values.  Theoretically,  # putwchar(3) with a wchar_t storing UCS-4 values.  Theoretically,
Line 62  UTF8_LOCALE=en_US.UTF-8
Line 70  UTF8_LOCALE=en_US.UTF-8
   
 MANPATH_DEFAULT="/usr/share/man:/usr/X11R6/man:/usr/local/man"  MANPATH_DEFAULT="/usr/share/man:/usr/X11R6/man:/usr/local/man"
   
   # Validation of cross references with mandoc -Tlint only looks
   # for manual pages in the following directories:
   
   MANPATH_BASE="/usr/share/man:/usr/X11R6/man"
   
   # When man(1) is called with the -S option and no manual page is
   # found matching the requested name and the requested architecture,
   # it tries to figure out whether the requested architecture is valid
   # for the present operating system.  Normally, ./configure detects
   # the operating system using uname(1).  If that fails or is not
   # desired, either of the following lines can be used:
   
   OSENUM=MANDOC_OS_NETBSD
   OSENUM=MANDOC_OS_OPENBSD
   OSENUM=MANDOC_OS_OTHER
   
 # In manual pages written in the mdoc(7) language, the operating system  # In manual pages written in the mdoc(7) language, the operating system
 # version is displayed in the page footer line.  If an operating system  # version is displayed in the page footer line.  If an operating system
 # is specified as an argument to the .Os macro, that is always used.  # is specified as an argument to the .Os macro, that is always used.
Line 72  MANPATH_DEFAULT="/usr/share/man:/usr/X11R6/man:/usr/lo
Line 96  MANPATH_DEFAULT="/usr/share/man:/usr/X11R6/man:/usr/lo
 # If you do not want uname(3) to be called but instead want a fixed  # If you do not want uname(3) to be called but instead want a fixed
 # string to be used, use the following line:  # string to be used, use the following line:
   
 OSNAME="OpenBSD 6.0"  OSNAME="OpenBSD 7.0"
   
 # The following installation directories are used.  # The following installation directories are used.
 # It is possible to set only one or a few of these variables,  # It is possible to set only one or a few of these variables,
Line 83  OSNAME="OpenBSD 6.0"
Line 107  OSNAME="OpenBSD 6.0"
 PREFIX="/usr/local"  PREFIX="/usr/local"
 BINDIR="${PREFIX}/bin"  BINDIR="${PREFIX}/bin"
 SBINDIR="${PREFIX}/sbin"  SBINDIR="${PREFIX}/sbin"
 INCLUDEDIR="${PREFIX}/include/mandoc"  
 LIBDIR="${PREFIX}/lib/mandoc"  
 MANDIR="${PREFIX}/man"  MANDIR="${PREFIX}/man"
   
   # If BINDIR and SBINDIR are not subdirectories of the same parent
   # directory or if the basename(1) of BINDIR differs from "bin",
   # the relative path from SBINDIR to BINDIR is also needed.
   # The default is:
   
   BIN_FROM_SBIN="../bin"
   
 # Some distributions may want to avoid naming conflicts  # Some distributions may want to avoid naming conflicts
 # with the configuration files of other man(1) implementations.  # with the configuration files of other man(1) implementations.
 # This changes the name of the installed section 5 manual page as well.  # This changes the name of the installed section 5 manual page as well.
   
 MANM_MANCONF="mandoc.conf"      # default is "man.conf"  MANM_MANCONF="mandoc.conf"      # default is "man.conf"
   
 # Some distributions may want to avoid naming conflicts among manuals.  # Some distributions may want to avoid naming conflicts among manuals.
Line 121  BINM_WHATIS=mwhatis  # default is "whatis"
Line 151  BINM_WHATIS=mwhatis  # default is "whatis"
 BINM_MAKEWHATIS=mandocdb        # default is "makewhatis"  BINM_MAKEWHATIS=mandocdb        # default is "makewhatis"
 BINM_SOELIM=msoelim             # default is "soelim"  BINM_SOELIM=msoelim             # default is "soelim"
   
   # If less(1) is available, it is used as the default manual pager.
   # Otherwise, more(1) is used: its existence is required by POSIX.
   # It is possible to force using a different default pager, either
   # by giving the name of a program found in the PATH, or by giving
   # an absolute path.
   
   BINM_PAGER=pg                   # default is "less" or "more"
   
   # Some distributions do not want hardlinks
   # between installed binary programs.
   # Set the following variable to use symbolic links instead.
   # It is also used for links between manual pages.
   # It is only used by the install* targets.
   # When using this, DESTDIR must be empty or an absolute path.
   
   LN="ln -sf"                     # default is "ln -f"
   
 # Before falling back to the bundled version of the ohash(3) hashing  # Before falling back to the bundled version of the ohash(3) hashing
 # library, autoconfiguration tries the following linker flag to  # library, autoconfiguration tries the following linker flag to
 # link against your system version.  If you do have ohash(3) on  # link against your system version.  If you do have ohash(3) on
Line 129  BINM_SOELIM=msoelim  # default is "soelim"
Line 176  BINM_SOELIM=msoelim  # default is "soelim"
   
 LD_OHASH="-lutil"  LD_OHASH="-lutil"
   
 # When library autodetection decides to use -L/usr/local/lib,  
 # -I/usr/local/include is automatically added to CFLAGS.  
 # If you manually set LD_OHASH to something including -L/usr/local/lib,  
 # chances are you will also need the following line:  
   
 CFLAGS="${CFLAGS} -I/usr/local/include"  
   
 # Some platforms may need an additional linker flag for nanosleep(2).  # Some platforms may need an additional linker flag for nanosleep(2).
 # If none is needed or it is -lrt, it is autodetected.  # If none is needed or it is -lrt, it is autodetected.
 # Otherwise, set the following variable.  # Otherwise, set the following variable.
   
 LD_NANOSLEEP="-lrt"  LD_NANOSLEEP="-lrt"
   
   # Some platforms may need an additional linker flag for recvmsg(2).
   # If none is needed or it is -lsocket, it is autodetected.
   # Otherwise, set the following variable.
   
   LD_RECVMSG="-lsocket"
   
 # Some platforms might need additional linker flags to link against  # Some platforms might need additional linker flags to link against
 # libmandoc that are not autodetected, though no such cases are  # libmandoc that are not autodetected, though no such cases are
 # currently known.  # currently known.
Line 163  INSTALL_LIB="${INSTALL} -m 0444"
Line 209  INSTALL_LIB="${INSTALL} -m 0444"
 INSTALL_MAN="${INSTALL} -m 0444"  INSTALL_MAN="${INSTALL} -m 0444"
 INSTALL_DATA="${INSTALL} -m 0444"  INSTALL_DATA="${INSTALL} -m 0444"
   
 # When using the "homebrew" package manager on Mac OS X, the actual  # By default, makewhatis(8) can only read from the paths passed on the
 # manuals are located in a so-called "cellar" and only symlinked  # command line or configured in man.conf(5).
 # into the manual trees.  To allow mandoc to follow such symlinks,  # But some package managers on some operating systems store manual pages
 # you have to specify the physical location of the cellar as returned  # in separate "cellar" or "store" directories and only symlink them
 # by realpath(3), for example:  # into the manual trees.
   # To support one or more such package managers, give makewhatis(8)
   # read access to the cellars and stores on your system, in the form
   # of a colon-separated path:
   
   # Homebrow package manager on Mac OS X:
 PREFIX="/usr/local"  PREFIX="/usr/local"
 HOMEBREWDIR="${PREFIX}/Cellar"  READ_ALLOWED_PATH="${PREFIX}/Cellar"
   
   # Nix package manager and/or NixOS Linux distribution:
   READ_ALLOWED_PATH="/nix/store"
   
   # GNU Guix package manager and/or GNU Guix Linux distribution:
   READ_ALLOWED_PATH="/gnu/store"
   
   # If multiple package managers are used concurrently:
   PREFIX="/usr/local"
   READ_ALLOWED_PATH="/nix/store:${PREFIX}/Cellar"
   
   # --- user settings for the mandoc(3) library --------------------------
   
   # By default, libmandoc.a is not installed.  It is almost never needed
   # because there is almost no non-mandoc software out there using this
   # library.  The one notable exception is NetBSD apropos(1).
   # So, when building for the NetBSD base system - but not for NetBSD
   # ports nor for pkgsrc! - you may want the following:
   
   INSTALL_LIBMANDOC=1
   
   # The following settings are only used when INSTALL_LIBMANDOC is set.
   
   INCLUDEDIR="${PREFIX}/include/mandoc"
   LIBDIR="${PREFIX}/lib/mandoc"
   
 # --- user settings related to man.cgi ---------------------------------  # --- user settings related to man.cgi ---------------------------------
   
 # By default, building man.cgi(8) is disabled.  To enable it, copy  # By default, building man.cgi(8) is disabled.  To enable it, copy
Line 182  BUILD_CGI=1
Line 257  BUILD_CGI=1
 # The remaining settings in this section are only relevant if BUILD_CGI  # The remaining settings in this section are only relevant if BUILD_CGI
 # is enabled.  Otherwise, they have no effect either way.  # is enabled.  Otherwise, they have no effect either way.
   
 # By default, man.cgi(8) is linked statically.  # By default, man.cgi(8) is linked statically if the compiler supports
 # Some systems do not support static linking, for example Mac OS X.  # the -static option.  If automatic detection fails, you can force
 # In that case, use the following line:  # static linking of man.cgi(8).
   
 STATIC=  STATIC="-static"
   
 # Some systems, for example Linux, require -pthread for static linking:  # Some systems may require -pthread for static linking:
   
 STATIC="-static -pthread"  STATIC="-static -pthread"
   
   # If static linking works in general but not with additional libraries
   # like -lrt or -lz, you can force dynamic linking.  This may for
   # example be required on SunOS 5.9.
   
   STATIC=" "
   
 # Some directories.  # Some directories.
 # This works just like PREFIX, see above.  # This works just like PREFIX, see above.
   
Line 199  WWWPREFIX="/var/www"
Line 280  WWWPREFIX="/var/www"
 HTDOCDIR="${WWWPREFIX}/htdocs"  HTDOCDIR="${WWWPREFIX}/htdocs"
 CGIBINDIR="${WWWPREFIX}/cgi-bin"  CGIBINDIR="${WWWPREFIX}/cgi-bin"
   
 # --- settings that rarely need to be touched --------------------------  # --- user settings related to catman ----------------------------------
   
 # Do not set these variables unless you really need to.  # By default, building mandocd(8) and catman(8) is disabled.
   # To enable it, use the following line.
   # It does not work on SunOS 5.10 because there is no mkdirat(2)
   # nor on SunOS 5.9 which also lacks CMSG_LEN(3) and CMSG_SPACE(3).
   
 # You can manually override the compiler to be used.  BUILD_CATMAN=1
 # But that's rarely useful because ./configure asks your make(1)  
 # which compiler to use, and that answer will hardly be wrong.  
   
 CC=cc  # Install catman(8) with a different name.
   # See BINM_MAN above for details of how this works.
   
 # IBM AIX may need:  BINM_CATMAN=mcatman             # default is "catman"
   
 CC=xlc  # --- settings that rarely need to be touched --------------------------
   
 # The default compiler flags are:  # Do not set these variables unless you really need to.
   
 CFLAGS="-g -W -Wall -Wstrict-prototypes -Wno-unused-parameter -Wwrite-strings"  # Normally, leave CFLAGS unset.  In that case, -g will automatically
   # be used, and various -W options will be added if the compiler
   # supports them.  If you define CFLAGS manually, it will be used
   # unchanged, and nothing will be added.
   
 # IBM AIX xlc does not support -W; in that case, please use:  
   
 CFLAGS="-g"  CFLAGS="-g"
   
 # In rare cases, it may be required to skip individual automatic tests.  # In rare cases, it may be required to skip individual automatic tests.
Line 226  CFLAGS="-g"
Line 310  CFLAGS="-g"
 # and will be regarded as failed) or 1 (test will not be run and will  # and will be regarded as failed) or 1 (test will not be run and will
 # be regarded as successful).  # be regarded as successful).
   
   HAVE_ATTRIBUTE=0
 HAVE_DIRENT_NAMLEN=0  HAVE_DIRENT_NAMLEN=0
   HAVE_ENDIAN=0
 HAVE_EFTYPE=0  HAVE_EFTYPE=0
 HAVE_ERR=0  HAVE_ERR=0
 HAVE_FTS=0  HAVE_FTS=0  # Setting this implies HAVE_FTS_COMPARE_CONST=0.
   HAVE_FTS_COMPARE_CONST=0  # Setting this implies HAVE_FTS=1.
 HAVE_GETLINE=0  HAVE_GETLINE=0
 HAVE_GETSUBOPT=0  HAVE_GETSUBOPT=0
 HAVE_ISBLANK=0  HAVE_ISBLANK=0
   HAVE_LESS_T=0
 HAVE_MKDTEMP=0  HAVE_MKDTEMP=0
   HAVE_NTOHL=0
   HAVE_O_DIRECTORY=0
 HAVE_OHASH=0  HAVE_OHASH=0
 HAVE_PATH_MAX=0  HAVE_PATH_MAX=0
 HAVE_PLEDGE=0  HAVE_PLEDGE=0
 HAVE_PROGNAME=0  HAVE_PROGNAME=0
 HAVE_REALLOCARRAY=0  HAVE_REALLOCARRAY=0
   HAVE_RECALLOCARRAY=0
 HAVE_REWB_BSD=0  HAVE_REWB_BSD=0
 HAVE_REWB_SYSV=0  HAVE_REWB_SYSV=0
 HAVE_STRCASESTR=0  HAVE_STRCASESTR=0
Line 248  HAVE_STRLCPY=0
Line 339  HAVE_STRLCPY=0
 HAVE_STRPTIME=0  HAVE_STRPTIME=0
 HAVE_STRSEP=0  HAVE_STRSEP=0
 HAVE_STRTONUM=0  HAVE_STRTONUM=0
   HAVE_SYS_ENDIAN=0
 HAVE_VASPRINTF=0  HAVE_VASPRINTF=0
 HAVE_WCHAR=0  HAVE_WCHAR=0

Legend:
Removed from v.1.19  
changed lines
  Added in v.1.41

CVSweb