Annotation of mandoc/configure.local.example, Revision 1.14
1.14 ! schwarze 1: # $Id: configure.local.example,v 1.13 2016/07/14 11:09:06 schwarze Exp $
1.1 schwarze 2: #
1.11 schwarze 3: # Copyright (c) 2014, 2015, 2016 Ingo Schwarze <schwarze@openbsd.org>
1.1 schwarze 4: #
5: # Permission to use, copy, modify, and distribute this software for any
6: # purpose with or without fee is hereby granted, provided that the above
7: # copyright notice and this permission notice appear in all copies.
8: #
9: # THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
10: # WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
11: # MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
12: # ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
13: # WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
14: # ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
15: # OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
16:
17: # For all settings documented in this file, there are reasonable
18: # defaults and/or the ./configure script attempts autodetection.
19: # Consequently, you only need to create a file ./configure.local
20: # and put any of these settings into it if ./configure autodetection
21: # fails or if you want to make different choices for other reasons.
22:
23: # If autodetection fails, please tell <tech@mdocml.bsd.lv>.
24:
25: # We recommend that you write ./configure.local from scratch and
26: # only put the lines there you need. This file contains examples.
27: # It is not intended as a template to be copied as a whole.
28:
29: # --- user settings relevant for all builds ----------------------------
30:
31: # For -Tutf8 and -Tlocale operation, mandoc(1) requires <locale.h>
32: # providing setlocale(3) and <wchar.h> providing wcwidth(3) and
33: # putwchar(3) with a wchar_t storing UCS-4 values. Theoretically,
34: # the latter should be tested with the __STDC_ISO_10646__ feature
35: # macro. In practice, many <wchar.h> headers do not provide that
36: # macro even though they treat wchar_t as UCS-4. So the automatic
37: # test only checks that wchar_t is wide enough, that is, at least
38: # four bytes.
39:
40: # The following line forces multi-byte support.
41: # If your C library does not treat wchar_t as UCS-4, the UTF-8 output
42: # mode will print garbage.
43:
44: HAVE_WCHAR=1
45:
46: # The following line disables multi-byte support.
47: # The output modes -Tutf8 and -Tlocale will be the same as -Tascii.
48:
49: HAVE_WCHAR=0
1.7 schwarze 50:
51: # When man(1) or apropos(1) is called without -m and -M options,
52: # MANPATH is not set in the environment, man.conf(5) is not available
53: # and manpath(1) not used, manuals are searched for in the following
54: # directory trees by default.
55:
56: MANPATH_DEFAULT="/usr/share/man:/usr/X11R6/man:/usr/local/man"
1.1 schwarze 57:
58: # In manual pages written in the mdoc(7) language, the operating system
59: # version is displayed in the page footer line. If an operating system
60: # is specified as an argument to the .Os macro, that is always used.
61: # If the .Os macro has no argument and an operation system is specified
62: # with the mandoc(1) -Ios= command line option, that is used.
63: # Otherwise, the uname(3) library function is called at runtime to find
64: # the name of the operating system.
65: # If you do not want uname(3) to be called but instead want a fixed
66: # string to be used, use the following line:
67:
1.11 schwarze 68: OSNAME="OpenBSD 5.9"
1.1 schwarze 69:
70: # The following installation directories are used.
71: # It is possible to set only one or a few of these variables,
72: # there is no need to copy the whole block.
73: # Even if you set PREFIX to something else, the other variables
74: # pick it up without copying them all over.
75:
76: PREFIX="/usr/local"
77: BINDIR="${PREFIX}/bin"
78: SBINDIR="${PREFIX}/sbin"
79: INCLUDEDIR="${PREFIX}/include/mandoc"
80: LIBDIR="${PREFIX}/lib/mandoc"
81: MANDIR="${PREFIX}/man"
82:
1.5 schwarze 83: # The man(1) utility needs to know where the manuals reside.
84: # We know of two ways to tell it: via manpath(1) or man.conf(5).
85: # The latter is used by OpenBSD and NetBSD, the former by most
86: # other systems.
87:
88: # Force usage of manpath(1).
89: # If it is not installed or not operational,
90: # man(1), makewhatis(8), and apropos(1) will not work properly.
91: HAVE_MANPATH=1
92:
93: # Force usage of man.conf(5).
94: HAVE_MANPATH=0
1.8 schwarze 95:
96: # Some distributions may want to avoid naming conflicts
97: # with the configuration files of other man(1) implementations.
98: # This changes the name of the installed section 5 manual page as well.
99: MANM_MANCONF="mandoc.conf" # default is "man.conf"
1.5 schwarze 100:
1.2 schwarze 101: # Some distributions may want to avoid naming conflicts among manuals.
102: # If you want to change the names of installed section 7 manual pages,
103: # the following alternative names are suggested.
104: # The suffix ".7" will automatically be appended.
105: # It is possible to set only one or a few of these variables,
106: # there is no need to copy the whole block.
107:
108: MANM_MAN="mandoc_man" # default is "man"
109: MANM_MDOC="mandoc_mdoc" # default is "mdoc"
110: MANM_ROFF="mandoc_roff" # default is "roff"
111: MANM_EQN="mandoc_eqn" # default is "eqn"
112: MANM_TBL="mandoc_tbl" # default is "tbl"
113:
1.5 schwarze 114: # Some distributions may want to avoid naming conflicts
1.9 schwarze 115: # with other man(1) and soelim(1) utilities.
116: # If you want to change the names of binary programs,
117: # the following alternative names are suggested.
118: # Using different names is possible as well.
119: # This changes the names of the installed section 1 manual pages as well.
1.5 schwarze 120:
121: BINM_MAN=mman # default is "man"
1.9 schwarze 122: BINM_SOELIM=msoelim # default is "soelim"
1.5 schwarze 123:
1.11 schwarze 124: # Before falling back to the bundled version of the ohash(3) hashing
125: # library, autoconfiguration tries the following linker flag to
126: # link against your system version. If you do have ohash(3) on
127: # your system but it needs different linker flags, set the following
128: # variable to specify the required linker flags.
129:
130: LD_OHASH="-lutil"
131:
1.12 schwarze 132: # Some platforms may need additional linker flags to link against libmandoc
133: # that are not autodetected.
1.11 schwarze 134: # For example, Solaris 9 and 10 need -lrt for nanosleep(2).
135:
136: LDADD="-lrt"
1.12 schwarze 137:
138: # Some systems may want to set additional linker flags for all the
139: # binaries, not only for those using libmandoc, for example for
140: # hardening options.
141:
142: LDFLAGS="-Wl,-z,relro"
1.11 schwarze 143:
1.1 schwarze 144: # It is possible to change the utility program used for installation
145: # and the modes files are installed with. The defaults are:
146:
147: INSTALL="install"
148: INSTALL_PROGRAM="${INSTALL} -m 0555"
149: INSTALL_LIB="${INSTALL} -m 0444"
150: INSTALL_MAN="${INSTALL} -m 0444"
151: INSTALL_DATA="${INSTALL} -m 0444"
152:
153: # --- user settings related to database support ------------------------
154:
155: # By default, building makewhatis(8) and apropos(1) is enabled.
156: # To disable it, for example to avoid the dependency on SQLite3,
157: # use the following line. It that case, the remaining settings
158: # in this section are irrelevant.
159:
160: BUILD_DB=0
161:
1.11 schwarze 162: # Autoconfiguration tries the following linker flags to find the
163: # SQLite3 library installed on your system. If none of these work,
164: # set the following variable to specify the required linker flags.
165:
166: LD_SQLITE3="-lsqlite3"
167: LD_SQLITE3="-L/usr/local/lib -lsqlite3"
1.1 schwarze 168:
169: # When library autodetection decides to use -L/usr/local/lib,
170: # -I/usr/local/include is automatically added to CFLAGS.
1.11 schwarze 171: # If you manually set LD_SQLITE3 to something including -L/usr/local/lib,
1.1 schwarze 172: # chances are you will also need the following line:
173:
174: CFLAGS="${CFLAGS} -I/usr/local/include"
175:
1.2 schwarze 176: # Some distributions may want to avoid naming conflicts
1.5 schwarze 177: # with another implementation of apropos(1) and makewhatis(8).
178: # If you want to change the names of the binary programs,
1.2 schwarze 179: # the following alternative names are suggested.
180: # Using other names is possible as well.
181: # This changes the names of the installed section 1 and section 8
182: # manual pages as well.
1.5 schwarze 183: # It is possible to set only one or two of these variables,
1.2 schwarze 184: # there is no need to copy the whole block.
185:
186: BINM_APROPOS=mapropos # default is "apropos"
187: BINM_WHATIS=mwhatis # default is "whatis"
188: BINM_MAKEWHATIS=mandocdb # default is "makewhatis"
1.3 schwarze 189:
190: # When using the "homebrew" package manager on Mac OS X, the actual
191: # manuals are located in a so-called "cellar" and only symlinked
192: # into the manual trees. To allow mandoc to follow such symlinks,
193: # you have to specify the physical location of the cellar as returned
194: # by realpath(3), for example:
195:
1.4 schwarze 196: PREFIX="/usr/local"
197: HOMEBREWDIR="${PREFIX}/Cellar"
1.1 schwarze 198:
1.14 ! schwarze 199: # --- user settings related to man.cgi ---------------------------------
1.1 schwarze 200:
201: # By default, building man.cgi(8) is disabled. To enable it, copy
202: # cgi.h.example to cgi.h, edit it, and use the following line.
203: # Obviously, this requires that BUILD_DB is enabled, too.
204:
205: BUILD_CGI=1
206:
207: # The remaining settings in this section are only relevant if BUILD_CGI
208: # is enabled. Otherwise, they have no effect either way.
209:
210: # By default, man.cgi(8) is linked statically.
211: # Some systems do not support static linking, for example Mac OS X.
212: # In that case, use the following line:
213:
214: STATIC=
215:
216: # Some systems, for example Linux, require -pthread for static linking:
217:
218: STATIC="-static -pthread"
219:
220: # Some directories.
221: # This works just like PREFIX, see above.
222:
223: WWWPREFIX="/var/www"
224: HTDOCDIR="${WWWPREFIX}/htdocs"
225: CGIBINDIR="${WWWPREFIX}/cgi-bin"
226:
227: # --- settings that rarely need to be touched --------------------------
228:
229: # Do not set these variables unless you really need to.
230:
231: # You can manually override the compiler to be used.
232: # But that's rarely useful because ./configure asks your make(1)
233: # which compiler to use, and that answer will hardly be wrong.
234:
235: CC=cc
236:
1.13 schwarze 237: # IBM AIX may need:
238:
239: CC=xlc
240:
1.1 schwarze 241: # The default compiler flags are:
242:
243: CFLAGS="-g -W -Wall -Wstrict-prototypes -Wno-unused-parameter -Wwrite-strings"
1.13 schwarze 244:
245: # IBM AIX xlc does not support -W; in that case, please use:
246:
247: CFLAGS="-g"
1.1 schwarze 248:
249: # In rare cases, it may be required to skip individual automatic tests.
250: # Each of the following variables can be set to 0 (test will not be run
251: # and will be regarded as failed) or 1 (test will not be run and will
252: # be regarded as successful).
253:
254: HAVE_DIRENT_NAMLEN=0
1.11 schwarze 255: HAVE_ERR=0
1.1 schwarze 256: HAVE_FTS=0
1.11 schwarze 257: HAVE_GETLINE=0
1.1 schwarze 258: HAVE_GETSUBOPT=0
1.11 schwarze 259: HAVE_ISBLANK=0
260: HAVE_MKDTEMP=0
1.1 schwarze 261: HAVE_MMAP=0
1.11 schwarze 262: HAVE_PLEDGE=0
263: HAVE_PROGNAME=0
1.1 schwarze 264: HAVE_REALLOCARRAY=0
1.11 schwarze 265: HAVE_REWB_BSD=0
266: HAVE_REWB_SYSV=0
1.1 schwarze 267: HAVE_STRCASESTR=0
1.11 schwarze 268: HAVE_STRINGLIST=0
1.1 schwarze 269: HAVE_STRLCAT=0
270: HAVE_STRLCPY=0
271: HAVE_STRPTIME=0
272: HAVE_STRSEP=0
1.6 schwarze 273: HAVE_STRTONUM=0
1.11 schwarze 274: HAVE_VASPRINTF=0
275: HAVE_WCHAR=0
1.1 schwarze 276:
277: HAVE_SQLITE3=0
278: HAVE_SQLITE3_ERRSTR=0
279: HAVE_OHASH=0
CVSweb