Annotation of mandoc/configure.local.example, Revision 1.4
1.4 ! schwarze 1: # $Id: configure.local.example,v 1.3 2015/01/21 22:41:49 schwarze Exp $
1.1 schwarze 2: #
1.3 schwarze 3: # Copyright (c) 2014, 2015 Ingo Schwarze <schwarze@openbsd.org>
1.1 schwarze 4: #
5: # Permission to use, copy, modify, and distribute this software for any
6: # purpose with or without fee is hereby granted, provided that the above
7: # copyright notice and this permission notice appear in all copies.
8: #
9: # THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
10: # WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
11: # MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
12: # ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
13: # WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
14: # ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
15: # OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
16:
17: # For all settings documented in this file, there are reasonable
18: # defaults and/or the ./configure script attempts autodetection.
19: # Consequently, you only need to create a file ./configure.local
20: # and put any of these settings into it if ./configure autodetection
21: # fails or if you want to make different choices for other reasons.
22:
23: # If autodetection fails, please tell <tech@mdocml.bsd.lv>.
24:
25: # We recommend that you write ./configure.local from scratch and
26: # only put the lines there you need. This file contains examples.
27: # It is not intended as a template to be copied as a whole.
28:
29: # --- user settings relevant for all builds ----------------------------
30:
31: # For -Tutf8 and -Tlocale operation, mandoc(1) requires <locale.h>
32: # providing setlocale(3) and <wchar.h> providing wcwidth(3) and
33: # putwchar(3) with a wchar_t storing UCS-4 values. Theoretically,
34: # the latter should be tested with the __STDC_ISO_10646__ feature
35: # macro. In practice, many <wchar.h> headers do not provide that
36: # macro even though they treat wchar_t as UCS-4. So the automatic
37: # test only checks that wchar_t is wide enough, that is, at least
38: # four bytes.
39:
40: # The following line forces multi-byte support.
41: # If your C library does not treat wchar_t as UCS-4, the UTF-8 output
42: # mode will print garbage.
43:
44: HAVE_WCHAR=1
45:
46: # The following line disables multi-byte support.
47: # The output modes -Tutf8 and -Tlocale will be the same as -Tascii.
48:
49: HAVE_WCHAR=0
50:
51: # In manual pages written in the mdoc(7) language, the operating system
52: # version is displayed in the page footer line. If an operating system
53: # is specified as an argument to the .Os macro, that is always used.
54: # If the .Os macro has no argument and an operation system is specified
55: # with the mandoc(1) -Ios= command line option, that is used.
56: # Otherwise, the uname(3) library function is called at runtime to find
57: # the name of the operating system.
58: # If you do not want uname(3) to be called but instead want a fixed
59: # string to be used, use the following line:
60:
1.2 schwarze 61: OSNAME="OpenBSD 5.6"
1.1 schwarze 62:
63: # The following installation directories are used.
64: # It is possible to set only one or a few of these variables,
65: # there is no need to copy the whole block.
66: # Even if you set PREFIX to something else, the other variables
67: # pick it up without copying them all over.
68:
69: PREFIX="/usr/local"
70: BINDIR="${PREFIX}/bin"
71: SBINDIR="${PREFIX}/sbin"
72: INCLUDEDIR="${PREFIX}/include/mandoc"
73: LIBDIR="${PREFIX}/lib/mandoc"
74: MANDIR="${PREFIX}/man"
75: EXAMPLEDIR="${PREFIX}/share/examples/mandoc"
76:
1.2 schwarze 77: # Some distributions may want to avoid naming conflicts among manuals.
78: # If you want to change the names of installed section 7 manual pages,
79: # the following alternative names are suggested.
80: # The suffix ".7" will automatically be appended.
81: # It is possible to set only one or a few of these variables,
82: # there is no need to copy the whole block.
83:
84: MANM_MAN="mandoc_man" # default is "man"
85: MANM_MDOC="mandoc_mdoc" # default is "mdoc"
86: MANM_ROFF="mandoc_roff" # default is "roff"
87: MANM_EQN="mandoc_eqn" # default is "eqn"
88: MANM_TBL="mandoc_tbl" # default is "tbl"
89:
1.1 schwarze 90: # It is possible to change the utility program used for installation
91: # and the modes files are installed with. The defaults are:
92:
93: INSTALL="install"
94: INSTALL_PROGRAM="${INSTALL} -m 0555"
95: INSTALL_LIB="${INSTALL} -m 0444"
96: INSTALL_MAN="${INSTALL} -m 0444"
97: INSTALL_DATA="${INSTALL} -m 0444"
98:
99: # --- user settings related to database support ------------------------
100:
101: # By default, building makewhatis(8) and apropos(1) is enabled.
102: # To disable it, for example to avoid the dependency on SQLite3,
103: # use the following line. It that case, the remaining settings
104: # in this section are irrelevant.
105:
106: BUILD_DB=0
107:
108: # Two libraries are needed: SQLite3 and ohash(3).
109: # Autoconfiguration tries the following linker flags to find them.
110: # If none of these work, add a working DBLIB line to configure.local,
111: # disabling autodetection for library directories.
112:
113: DBLIB="-lsqlite3"
114: DBLIB="-lsqlite3 -lutil"
115: DBLIB="-L/usr/local/lib -lsqlite3"
116:
117: # When library autodetection decides to use -L/usr/local/lib,
118: # -I/usr/local/include is automatically added to CFLAGS.
119: # If you manually set DBLIB to something including -L/usr/local/lib,
120: # chances are you will also need the following line:
121:
122: CFLAGS="${CFLAGS} -I/usr/local/include"
123:
124: # The man(1) utility needs to know where the manuals reside.
125: # We know of two ways to tell it: via manpath(1) or man.conf(5).
126: # The latter is used by OpenBSD and NetBSD, the former by most
127: # other systems.
128:
129: # Force usage of manpath(1).
130: # If it is not installed or not operational,
131: # makewhatis(8) and apropos(1) will not work properly.
132:
133: HAVE_MANPATH=1
134:
135: # Force usage of man.conf(5).
136: # If it does not exist or contains no valid configuration,
137: # makewhatis(8) and apropos(1) will not work properly.
138:
139: HAVE_MANPATH=0
1.2 schwarze 140:
141: # Some distributions may want to avoid naming conflicts
142: # with groff, man-db, or other tools.
143: # If you want to change the names of binary programs,
144: # the following alternative names are suggested.
145: # Using other names is possible as well.
146: # This changes the names of the installed section 1 and section 8
147: # manual pages as well.
148: # It is possible to set only one or a few of these variables,
149: # there is no need to copy the whole block.
150:
151: BINM_APROPOS=mapropos # default is "apropos"
152: BINM_MAN=mman # default is "man"
153: BINM_WHATIS=mwhatis # default is "whatis"
154: BINM_MAKEWHATIS=mandocdb # default is "makewhatis"
1.3 schwarze 155:
156: # When using the "homebrew" package manager on Mac OS X, the actual
157: # manuals are located in a so-called "cellar" and only symlinked
158: # into the manual trees. To allow mandoc to follow such symlinks,
159: # you have to specify the physical location of the cellar as returned
160: # by realpath(3), for example:
161:
1.4 ! schwarze 162: PREFIX="/usr/local"
! 163: HOMEBREWDIR="${PREFIX}/Cellar"
1.1 schwarze 164:
165: # --- user settings related man.cgi ------------------------------------
166:
167: # By default, building man.cgi(8) is disabled. To enable it, copy
168: # cgi.h.example to cgi.h, edit it, and use the following line.
169: # Obviously, this requires that BUILD_DB is enabled, too.
170:
171: BUILD_CGI=1
172:
173: # The remaining settings in this section are only relevant if BUILD_CGI
174: # is enabled. Otherwise, they have no effect either way.
175:
176: # By default, man.cgi(8) is linked statically.
177: # Some systems do not support static linking, for example Mac OS X.
178: # In that case, use the following line:
179:
180: STATIC=
181:
182: # Some systems, for example Linux, require -pthread for static linking:
183:
184: STATIC="-static -pthread"
185:
186: # Some directories.
187: # This works just like PREFIX, see above.
188:
189: WWWPREFIX="/var/www"
190: HTDOCDIR="${WWWPREFIX}/htdocs"
191: CGIBINDIR="${WWWPREFIX}/cgi-bin"
192:
193: # --- settings that rarely need to be touched --------------------------
194:
195: # Do not set these variables unless you really need to.
196:
197: # You can manually override the compiler to be used.
198: # But that's rarely useful because ./configure asks your make(1)
199: # which compiler to use, and that answer will hardly be wrong.
200:
201: CC=cc
202:
203: # The default compiler flags are:
204:
205: CFLAGS="-g -W -Wall -Wstrict-prototypes -Wno-unused-parameter -Wwrite-strings"
206:
207: # In rare cases, it may be required to skip individual automatic tests.
208: # Each of the following variables can be set to 0 (test will not be run
209: # and will be regarded as failed) or 1 (test will not be run and will
210: # be regarded as successful).
211:
212: HAVE_DIRENT_NAMLEN=0
213: HAVE_FGETLN=0
214: HAVE_FTS=0
215: HAVE_GETSUBOPT=0
216: HAVE_MMAP=0
217: HAVE_REALLOCARRAY=0
218: HAVE_STRCASESTR=0
219: HAVE_STRLCAT=0
220: HAVE_STRLCPY=0
221: HAVE_STRPTIME=0
222: HAVE_STRSEP=0
223:
224: HAVE_SQLITE3=0
225: HAVE_SQLITE3_ERRSTR=0
226: HAVE_OHASH=0
CVSweb