=================================================================== RCS file: /cvs/mandoc/man.7,v retrieving revision 1.75 retrieving revision 1.97 diff -u -p -r1.75 -r1.97 --- mandoc/man.7 2010/07/16 10:25:54 1.75 +++ mandoc/man.7 2011/01/25 00:40:14 1.97 @@ -1,6 +1,6 @@ -.\" $Id: man.7,v 1.75 2010/07/16 10:25:54 kristaps Exp $ +.\" $Id: man.7,v 1.97 2011/01/25 00:40:14 schwarze Exp $ .\" -.\" Copyright (c) 2009 Kristaps Dzonsons +.\" Copyright (c) 2009, 2010 Kristaps Dzonsons .\" .\" Permission to use, copy, modify, and distribute this software for any .\" purpose with or without fee is hereby granted, provided that the above @@ -14,7 +14,7 @@ .\" ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF .\" OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. .\" -.Dd $Mdocdate: July 16 2010 $ +.Dd $Mdocdate: January 25 2011 $ .Dt MAN 7 .Os .Sh NAME @@ -37,7 +37,7 @@ Use the .Xr mdoc 7 language, instead. .Pp -An +A .Nm document follows simple rules: lines beginning with the control character @@ -52,13 +52,13 @@ Other lines are interpreted within the current state. .Sh INPUT ENCODING .Nm documents may contain only graphable 7-bit ASCII characters, the -space character, and the tabs character. -All manuals must have -.Ux -line termination. +space character, and the tab character. .Pp Blank lines are acceptable; where found, the output will assert a vertical space. +.Pp +If the first character of a line is a space, that line is printed +with a leading newline. .Ss Comments Text following a .Sq \e\*q , @@ -92,7 +92,7 @@ and .Ss Text Decoration Terms may be text-decorated using the .Sq \ef -escape followed by an indicator: B (bold), I, (italic), R (Roman), or P +escape followed by an indicator: B (bold), I (italic), R (Roman), or P (revert to previous mode): .Pp .D1 \efBbold\efR \efIitalic\efP @@ -106,35 +106,12 @@ Note that macros like .Sx \&BR open and close a font scope with each argument. .Pp -Text may also be sized with the -.Sq \es -escape, whose syntax is one of -.Sq \es+-n -for one-digit numerals; -.Sq \es(+-nn -or -.Sq \es+-(nn -for two-digit numerals; and -.Sq \es[+-N] , -.Sq \es+-[N] , -.Sq \es'+-N' , -or -.Sq \es+-'N' -for arbitrary-digit numerals: -.Pp -.D1 \es+1bigger\es-1 -.D1 \es[+10]much bigger\es[-10] -.D1 \es+(10much bigger\es-(10 -.D1 \es+'100'much much bigger\es-'100' -.Pp -Both -.Sq \es -and +The .Sq \ef -attributes are forgotten when entering or exiting a macro block. +attribute is forgotten when entering or exiting a macro block. .Ss Whitespace Whitespace consists of the space character. -In free-form lines, whitespace is preserved within a line; un-escaped +In free-form lines, whitespace is preserved within a line; unescaped trailing spaces are stripped from input (unless in a literal context). Blank free-form lines, which may include spaces, are permitted and rendered as an empty line. @@ -213,23 +190,25 @@ this differs from which, if a unit is not provided, will instead interpret the string as literal text. .Ss Sentence Spacing -When composing a manual, make sure that your sentences end at the end of +When composing a manual, make sure that sentences end at the end of a line. By doing so, front-ends will be able to apply the proper amount of spacing after the end of sentence (unescaped) period, exclamation mark, or question mark followed by zero or more non-sentence closing -delimiters ( -.Ns Sq \&) , +delimiters +.Po +.Sq \&) , .Sq \&] , .Sq \&' , -.Sq \&" ) . +.Sq \&" +.Pc . .Sh MANUAL STRUCTURE Each .Nm -document must contain contains at least the +document must contain the .Sx \&TH macro describing the document's section and title. -It may occur anywhere in the document, although conventionally, it +It may occur anywhere in the document, although conventionally it appears as the first macro. .Pp Beyond @@ -238,31 +217,29 @@ at least one macro or text node must appear in the doc Documents are generally structured as follows: .Bd -literal -offset indent \&.TH FOO 1 2009-10-10 -\&. \&.SH NAME \efBfoo\efR \e(en a description goes here -\&.\e\*q The next is for sections 2 & 3 only. \&.\e\*q .SH LIBRARY -\&. +\&.\e\*q For sections 2 & 3 only. +\&.\e\*q Not used in OpenBSD. \&.SH SYNOPSIS \efBfoo\efR [\efB\e-options\efR] arguments... -\&. \&.SH DESCRIPTION The \efBfoo\efR utility processes files... -\&. \&.\e\*q .SH IMPLEMENTATION NOTES -\&.\e\*q The next is for sections 2, 3, & 9 only. +\&.\e\*q Not used in OpenBSD. \&.\e\*q .SH RETURN VALUES -\&.\e\*q The next is for sections 1, 6, 7, & 8 only. +\&.\e\*q For sections 2, 3, & 9 only. \&.\e\*q .SH ENVIRONMENT +\&.\e\*q For sections 1, 6, 7, & 8 only. \&.\e\*q .SH FILES -\&.\e\*q The next is for sections 1 & 8 only. \&.\e\*q .SH EXIT STATUS +\&.\e\*q For sections 1, 6, & 8 only. \&.\e\*q .SH EXAMPLES -\&.\e\*q The next is for sections 1, 4, 6, 7, & 8 only. \&.\e\*q .SH DIAGNOSTICS -\&.\e\*q The next is for sections 2, 3, & 9 only. +\&.\e\*q For sections 1, 4, 6, 7, & 8 only. \&.\e\*q .SH ERRORS +\&.\e\*q For sections 2, 3, & 9 only. \&.\e\*q .SH SEE ALSO \&.\e\*q .BR foo ( 1 ) \&.\e\*q .SH STANDARDS @@ -271,6 +248,7 @@ The \efBfoo\efR utility processes files... \&.\e\*q .SH CAVEATS \&.\e\*q .SH BUGS \&.\e\*q .SH SECURITY CONSIDERATIONS +\&.\e\*q Not used in OpenBSD. .Ed .Pp The sections in a @@ -318,22 +296,17 @@ Implementation-specific notes should be kept here. This is useful when implementing standard functions that may have side effects or notable algorithmic implications. .It Em RETURN VALUES -This section is the dual of -.Em EXIT STATUS , -which is used for commands. -It documents the return values of functions in sections 2, 3, and 9. +This section documents the return values of functions in sections 2, 3, and 9. .It Em ENVIRONMENT Documents any usages of environment variables, e.g., .Xr environ 7 . .It Em FILES Documents files used. -It's helpful to document both the file and a short description of how +It's helpful to document both the file name and a short description of how the file is used (created, modified, etc.). .It Em EXIT STATUS -Command exit status for section 1, 6, and 8 manuals. -This section is the dual of -.Em RETURN VALUES , -which is used for functions. +This section documents the command exit status for +section 1, 6, and 8 utilities. Historically, this information was described in .Em DIAGNOSTICS , a practise that is now discouraged. @@ -341,7 +314,7 @@ a practise that is now discouraged. Example usages. This often contains snippets of well-formed, well-tested invocations. -Make doubly sure that your examples work properly! +Make sure that examples work properly! .It Em DIAGNOSTICS Documents error conditions. This is most useful in section 4 manuals. @@ -368,23 +341,22 @@ If not adhering to any standards, the .Em HISTORY section should be used. .It Em HISTORY -The history of any manual without a -.Em STANDARDS -section should be described in this section. +A brief history of the subject, including where support first appeared. .It Em AUTHORS -Credits to authors, if applicable, should appear in this section. -Authors should generally be noted by both name and an e-mail address. +Credits to the person or persons who wrote the code and/or documentation. +Authors should generally be noted by both name and email address. .It Em CAVEATS -Explanations of common misuses and misunderstandings should be explained +Common misuses and misunderstandings should be explained in this section. .It Em BUGS -Extant bugs should be described in this section. +Known bugs, limitations, and work-arounds should be described +in this section. .It Em SECURITY CONSIDERATIONS Documents any security precautions that operators should consider. .El .Sh MACRO SYNTAX -Macros are one to three three characters in length and begin with a -control character , +Macros are one to three characters in length and begin with a +control character, .Sq \&. , at the beginning of the line. The @@ -398,6 +370,13 @@ Thus, the following are equivalent: \&.\ \ \ PP .Ed .Pp +To include space characters in macro arguments, arguments may be quoted; +see the +.Sq MACRO SYNTAX +section in the +.Xr roff 7 +manual for details. +.Pp The .Nm macros are classified by scope: line scope or block scope. @@ -420,11 +399,11 @@ is equivalent to .Sq \&.I foo . If next-line macros are invoked consecutively, only the last is used. If a next-line macro is followed by a non-next-line macro, an error is -raised (unless in the case of +raised, except for .Sx \&br , .Sx \&sp , -or -.Sx \&na ) . +and +.Sx \&na . .Pp The syntax is as follows: .Bd -literal -offset indent @@ -442,7 +421,6 @@ The syntax is as follows: .It Sx \&I Ta n Ta next-line Ta \& .It Sx \&IB Ta n Ta current Ta \& .It Sx \&IR Ta n Ta current Ta \& -.\" .It Sx \&PD Ta n Ta current Ta compat .It Sx \&R Ta n Ta next-line Ta \& .It Sx \&RB Ta n Ta current Ta \& .It Sx \&RI Ta n Ta current Ta \& @@ -452,14 +430,11 @@ The syntax is as follows: .It Sx \&UC Ta <=1 Ta current Ta \& .It Sx \&br Ta 0 Ta current Ta compat .It Sx \&fi Ta 0 Ta current Ta compat -.It Sx \&i Ta n Ta current Ta compat +.It Sx \&ft Ta 1 Ta current Ta compat +.It Sx \&in Ta 1 Ta current Ta compat .It Sx \&na Ta 0 Ta current Ta compat .It Sx \&nf Ta 0 Ta current Ta compat -.It Sx \&r Ta 0 Ta current Ta compat .It Sx \&sp Ta 1 Ta current Ta compat -.\" .It Sx \&Sp Ta <1 Ta current Ta compat -.\" .It Sx \&Vb Ta <1 Ta current Ta compat -.\" .It Sx \&Ve Ta 0 Ta current Ta compat .El .Pp Macros marked as @@ -470,8 +445,8 @@ These macros should not be used for portable .Nm manuals. .Ss Block Macros -Block macros are comprised of a head and body. -Like for in-line macros, the head is scoped to the current line and, in +Block macros comprise a head and body. +As with in-line macros, the head is scoped to the current line and, in one circumstance, the next line (the next-line stipulations as in .Sx Line Macros apply here as well). @@ -539,12 +514,9 @@ The optional arguments specify which release it is fro Text is rendered in bold face. .Pp See also -.Sx \&I , -.Sx \&R , -.Sx \&b , -.Sx \&i , +.Sx \&I and -.Sx \&r . +.Sx \&R . .Ss \&BI Text is rendered alternately in bold face and italic. Thus, @@ -562,7 +534,7 @@ Whitespace between arguments is omitted in output. .Pp Examples: .Pp -.D1 \&.BI bold italic bold italic +.Dl \&.BI bold italic bold italic .Pp The output of this example will be emboldened .Dq bold @@ -621,15 +593,12 @@ and Text is rendered in italics. .Pp See also -.Sx \&B , -.Sx \&R , -.Sx \&b , -.Sx \&i , +.Sx \&B and -.Sx \&r . +.Sx \&R . .Ss \&IB -Text is rendered alternately in italics and bold face. Whitespace -between arguments is omitted in output. +Text is rendered alternately in italics and bold face. +Whitespace between arguments is omitted in output. .Pp See .Sx \&BI @@ -652,7 +621,7 @@ Begin an indented paragraph with the following syntax: The .Cm width argument defines the width of the left margin and is defined by -.Sx Scaling Widths , +.Sx Scaling Widths . It's saved for later paragraph left-margins; if unspecified, the saved or default width is used. .Pp @@ -687,7 +656,7 @@ and Begin an undecorated paragraph. The scope of a paragraph is closed by a subsequent paragraph, sub-section, section, or end of file. -The saved paragraph left-margin width is re-set to the default. +The saved paragraph left-margin width is reset to the default. .Pp See also .Sx \&HP , @@ -722,12 +691,9 @@ and Text is rendered in roman (the default font). .Pp See also -.Sx \&I , -.Sx \&B , -.Sx \&b , -.Sx \&i , +.Sx \&I and -.Sx \&r . +.Sx \&B . .Ss \&RB Text is rendered alternately in roman (the default font) and bold face. Whitespace between arguments is omitted in output. @@ -784,7 +750,7 @@ bold face. Begin a section. The scope of a section is only closed by another section or the end of file. -The paragraph left-margin width is re-set to the default. +The paragraph left-margin width is reset to the default. .Ss \&SM Text is rendered in small size (one point smaller than the default font). @@ -792,7 +758,7 @@ font). Begin a sub-section. The scope of a sub-section is closed by a subsequent sub-section, section, or end of file. -The paragraph left-margin width is re-set to the default. +The paragraph left-margin width is reset to the default. .Ss \&TH Sets the title of the manual page with the following syntax: .Bd -filled -offset indent @@ -801,9 +767,9 @@ Sets the title of the manual page with the following s .Op Cm date Op Cm source Op Cm volume .Ed .Pp -At least the upper-case document title +At least the upper-case document .Cm title -and numeric manual section +and the manual .Cm section arguments must be provided. The @@ -822,7 +788,7 @@ manual section. .Pp Examples: .Pp -.D1 \&.TH CVS 5 "1992-02-12" GNU +.Dl \&.TH CVS 5 "1992-02-12" GNU .Ss \&TP Begin a paragraph where the head, if exceeding the indentation width, is followed by a newline; if not, the body follows on the same line after a @@ -848,12 +814,6 @@ See also .Sx \&P , and .Sx \&PP . -.\" . -.\" . -.\" .Ss \&PD -.\" Has no effect. Included for compatibility. -.\" . -.\" . .Ss \&UC Sets the volume for the footer for compatibility with man pages from BSD releases. @@ -867,18 +827,21 @@ See also .Ss \&fi End literal mode begun by .Sx \&nf . -.Ss \&i -Italicise arguments. -Synonym for -.Sx \&I . +.Ss \&ft +Change the current font mode. +See +.Sx Text Decoration +for a listing of available font modes. +.Ss \&in +Indent relative to the current indentation: .Pp -See also -.Sx \&B , -.Sx \&I , -.Sx \&R . -.Sx \&b , -and -.Sx \&r . +.D1 Pf \. Sx \&in Op Cm width +.Pp +If +.Cm width +is signed, the new offset is relative. +Otherwise, it is absolute. +This value is reset upon the next paragraph, section, or sub-section. .Ss \&na Don't align to the right margin. .Ss \&nf @@ -886,16 +849,6 @@ Begin literal mode: all subsequent free-form lines hav line boundaries preserved. May be ended by .Sx \&fi . -.Ss \&r -Fonts and styles (bold face, italics) reset to roman (default font). -.Pp -See also -.Sx \&B , -.Sx \&I , -.Sx \&R , -.Sx \&b , -and -.Sx \&i . .Ss \&sp Insert vertical spaces into output with the following syntax: .Bd -filled -offset indent @@ -914,21 +867,6 @@ Defaults to 1, if unspecified. .Pp See also .Sx \&br . -.\" .Ss \&Sp -.\" A synonym for -.\" .Sx \&sp -.\" .Cm 0.5v . -.\" . -.\" .Ss \&Vb -.\" A synonym for -.\" .Sx \&nf . -.\" Accepts an argument (the height of the formatted space) which is -.\" disregarded. -.\" . -.\" .Ss \&Ve -.\" A synonym for -.\" .Sx \&fi . -.\" . .Sh COMPATIBILITY This section documents areas of questionable portability between implementations of the @@ -941,23 +879,63 @@ In quoted literals, GNU troff allowed pair-wise double a standalone double-quote in formatted output. It is not known whether this behaviour is exhibited by other formatters. .It +troff suppresses a newline before +.Sq \(aq +macro output; in mandoc, it is an alias for the standard +.Sq \&. +control character. +.It The +.Sq \eh +.Pq horizontal position , +.Sq \ev +.Pq vertical position , +.Sq \em +.Pq text colour , +.Sq \eM +.Pq text filling colour , +.Sq \ez +.Pq zero-length character , +.Sq \ew +.Pq string length , +.Sq \ek +.Pq horizontal position marker , +.Sq \eo +.Pq text overstrike , +and +.Sq \es +.Pq text size +escape sequences are all discarded in mandoc. +.It +The +.Sq \ef +scaling unit is accepted by mandoc, but rendered as the default unit. +.It +The .Sx \&sp macro does not accept negative values in mandoc. In GNU troff, this would result in strange behaviour. -.It -The -.Sq \(aq -macro control character, in GNU troff (and prior troffs) suppresses a -newline before macro output; in mandoc, it is an alias for the standard -.Sq \&. -control character. .El .Sh SEE ALSO +.Xr man 1 , .Xr mandoc 1 , -.Xr mandoc_char 7 -.Sh AUTHORS +.Xr mandoc_char 7 , +.Xr mdoc 7 , +.Xr roff 7 , +.Xr tbl 7 +.Sh HISTORY The +.Nm +language first appeared as a macro package for the roff typesetting +system in +.At v7 . +It was later rewritten by James Clark as a macro package for groff. +The stand-alone implementation that is part of the +.Xr mandoc 1 +utility written by Kristaps Dzonsons appeared in +.Ox 4.6 . +.Sh AUTHORS +This .Nm reference was written by .An Kristaps Dzonsons Aq kristaps@bsd.lv .