[BACK]Return to mdoc.7 CVS log [TXT][DIR] Up to [cvsweb.bsd.lv] / mandoc

Diff for /mandoc/mdoc.7 between version 1.164 and 1.180

version 1.164, 2010/11/29 13:02:47 version 1.180, 2011/02/09 10:03:02
Line 1 
Line 1 
 .\"     $Id$  .\"     $Id$
 .\"  .\"
 .\" Copyright (c) 2009, 2010 Kristaps Dzonsons <kristaps@bsd.lv>  .\" Copyright (c) 2009, 2010, 2011 Kristaps Dzonsons <kristaps@bsd.lv>
 .\" Copyright (c) 2010 Ingo Schwarze <schwarze@openbsd.org>  .\" Copyright (c) 2010 Ingo Schwarze <schwarze@openbsd.org>
 .\"  .\"
 .\" Permission to use, copy, modify, and distribute this software for any  .\" Permission to use, copy, modify, and distribute this software for any
Line 52  Other lines are interpreted within the current state.
Line 52  Other lines are interpreted within the current state.
 .Nm  .Nm
 documents may contain only graphable 7-bit ASCII characters, the space  documents may contain only graphable 7-bit ASCII characters, the space
 character, and, in certain circumstances, the tab character.  character, and, in certain circumstances, the tab character.
 All manuals must have  .Pp
 .Ux  If the first character of a line is a space, that line is printed
 line terminators.  with a leading newline.
 .Ss Comments  .Ss Comments
 Text following a  Text following a
 .Sq \e\*q ,  .Sq \e\*q ,
Line 125  Terms may be text-decorated using the
Line 125  Terms may be text-decorated using the
 escape followed by an indicator: B (bold), I (italic), R (Roman), or P  escape followed by an indicator: B (bold), I (italic), R (Roman), or P
 (revert to previous mode):  (revert to previous mode):
 .Pp  .Pp
 .D1 \efBbold\efR \efIitalic\efP  .Dl \efBbold\efR \efIitalic\efP
 .Pp  .Pp
 A numerical representation 3, 2, or 1 (bold, italic, and Roman,  A numerical representation 3, 2, or 1 (bold, italic, and Roman,
 respectively) may be used instead.  respectively) may be used instead.
Line 283  a line.
Line 283  a line.
 By doing so, front-ends will be able to apply the proper amount of  By doing so, front-ends will be able to apply the proper amount of
 spacing after the end of sentence (unescaped) period, exclamation mark,  spacing after the end of sentence (unescaped) period, exclamation mark,
 or question mark followed by zero or more non-sentence closing  or question mark followed by zero or more non-sentence closing
 delimiters (  delimiters
 .Ns Sq \&) ,  .Po
   .Sq \&) ,
 .Sq \&] ,  .Sq \&] ,
 .Sq \&' ,  .Sq \&' ,
 .Sq \&" ) .  .Sq \&"
   .Pc .
 .Pp  .Pp
 The proper spacing is also intelligently preserved if a sentence ends at  The proper spacing is also intelligently preserved if a sentence ends at
 the boundary of a macro line.  the boundary of a macro line.
 For example:  For example:
 .Pp  .Pp
 .D1 \&Xr mandoc 1 \.  .Dl \&Xr mandoc 1 \.
 .D1 \&Fl T \&Ns \&Cm ascii \.  .Dl \&Fl T \&Ns \&Cm ascii \.
 .Sh MANUAL STRUCTURE  .Sh MANUAL STRUCTURE
 A well-formed  A well-formed
 .Nm  .Nm
Line 604  closes it out.
Line 606  closes it out.
 .Pp  .Pp
 The  The
 .Em Callable  .Em Callable
 column indicates that the macro may be called subsequent to the initial  column indicates that the macro may also be called by passing its name
 line-macro.  as an argument to another macro.
 If a macro is not callable, then its invocation after the initial line  If a macro is not callable but its name appears as an argument
 macro is interpreted as opaque text, such that  to another macro, it is interpreted as opaque text.
   For example,
 .Sq \&.Fl \&Sh  .Sq \&.Fl \&Sh
 produces  produces
 .Sq Fl \&Sh .  .Sq Fl \&Sh .
 .Pp  .Pp
 The  The
 .Em Parsed  .Em Parsed
 column indicates whether the macro may be followed by further  column indicates whether the macro may call other macros by receiving
 (ostensibly callable) macros.  their names as arguments.
 If a macro is not parsed, subsequent macro invocations on the line  If a macro is not parsed but the name of another macro appears
 will be interpreted as opaque text.  as an argument, it is interpreted as opaque text.
 .Pp  .Pp
 The  The
 .Em Scope  .Em Scope
Line 794  then the macro accepts an arbitrary number of argument
Line 797  then the macro accepts an arbitrary number of argument
 .It Sx \&%T  Ta    \&No     Ta    \&No     Ta    >0  .It Sx \&%T  Ta    \&No     Ta    \&No     Ta    >0
 .It Sx \&%U  Ta    \&No     Ta    \&No     Ta    >0  .It Sx \&%U  Ta    \&No     Ta    \&No     Ta    >0
 .It Sx \&%V  Ta    \&No     Ta    \&No     Ta    >0  .It Sx \&%V  Ta    \&No     Ta    \&No     Ta    >0
 .It Sx \&Ad  Ta    Yes      Ta    Yes      Ta    n  .It Sx \&Ad  Ta    Yes      Ta    Yes      Ta    >0
 .It Sx \&An  Ta    Yes      Ta    Yes      Ta    n  .It Sx \&An  Ta    Yes      Ta    Yes      Ta    >0
 .It Sx \&Ap  Ta    Yes      Ta    Yes      Ta    0  .It Sx \&Ap  Ta    Yes      Ta    Yes      Ta    0
 .It Sx \&Ar  Ta    Yes      Ta    Yes      Ta    n  .It Sx \&Ar  Ta    Yes      Ta    Yes      Ta    n
 .It Sx \&At  Ta    Yes      Ta    Yes      Ta    1  .It Sx \&At  Ta    Yes      Ta    Yes      Ta    1
Line 803  then the macro accepts an arbitrary number of argument
Line 806  then the macro accepts an arbitrary number of argument
 .It Sx \&Bt  Ta    \&No     Ta    \&No     Ta    0  .It Sx \&Bt  Ta    \&No     Ta    \&No     Ta    0
 .It Sx \&Bx  Ta    Yes      Ta    Yes      Ta    n  .It Sx \&Bx  Ta    Yes      Ta    Yes      Ta    n
 .It Sx \&Cd  Ta    Yes      Ta    Yes      Ta    >0  .It Sx \&Cd  Ta    Yes      Ta    Yes      Ta    >0
 .It Sx \&Cm  Ta    Yes      Ta    Yes      Ta    n  .It Sx \&Cm  Ta    Yes      Ta    Yes      Ta    >0
 .It Sx \&Db  Ta    \&No     Ta    \&No     Ta    1  .It Sx \&Db  Ta    \&No     Ta    \&No     Ta    1
 .It Sx \&Dd  Ta    \&No     Ta    \&No     Ta    n  .It Sx \&Dd  Ta    \&No     Ta    \&No     Ta    n
 .It Sx \&Dt  Ta    \&No     Ta    \&No     Ta    n  .It Sx \&Dt  Ta    \&No     Ta    \&No     Ta    n
 .It Sx \&Dv  Ta    Yes      Ta    Yes      Ta    n  .It Sx \&Dv  Ta    Yes      Ta    Yes      Ta    >0
 .It Sx \&Dx  Ta    Yes      Ta    Yes      Ta    n  .It Sx \&Dx  Ta    Yes      Ta    Yes      Ta    n
 .It Sx \&Em  Ta    Yes      Ta    Yes      Ta    >0  .It Sx \&Em  Ta    Yes      Ta    Yes      Ta    >0
 .It Sx \&En  Ta    \&No     Ta    \&No     Ta    0  .It Sx \&En  Ta    \&No     Ta    \&No     Ta    0
 .It Sx \&Er  Ta    Yes      Ta    Yes      Ta    >0  .It Sx \&Er  Ta    Yes      Ta    Yes      Ta    >0
 .It Sx \&Es  Ta    \&No     Ta    \&No     Ta    0  .It Sx \&Es  Ta    \&No     Ta    \&No     Ta    0
 .It Sx \&Ev  Ta    Yes      Ta    Yes      Ta    n  .It Sx \&Ev  Ta    Yes      Ta    Yes      Ta    >0
 .It Sx \&Ex  Ta    \&No     Ta    \&No     Ta    n  .It Sx \&Ex  Ta    \&No     Ta    \&No     Ta    n
 .It Sx \&Fa  Ta    Yes      Ta    Yes      Ta    n  .It Sx \&Fa  Ta    Yes      Ta    Yes      Ta    >0
 .It Sx \&Fd  Ta    \&No     Ta    \&No     Ta    >0  .It Sx \&Fd  Ta    \&No     Ta    \&No     Ta    >0
 .It Sx \&Fl  Ta    Yes      Ta    Yes      Ta    n  .It Sx \&Fl  Ta    Yes      Ta    Yes      Ta    n
 .It Sx \&Fn  Ta    Yes      Ta    Yes      Ta    >0  .It Sx \&Fn  Ta    Yes      Ta    Yes      Ta    >0
 .It Sx \&Fr  Ta    \&No     Ta    \&No     Ta    n  .It Sx \&Fr  Ta    \&No     Ta    \&No     Ta    n
 .It Sx \&Ft  Ta    Yes      Ta    Yes      Ta    n  .It Sx \&Ft  Ta    Yes      Ta    Yes      Ta    >0
 .It Sx \&Fx  Ta    Yes      Ta    Yes      Ta    n  .It Sx \&Fx  Ta    Yes      Ta    Yes      Ta    n
 .It Sx \&Hf  Ta    \&No     Ta    \&No     Ta    n  .It Sx \&Hf  Ta    \&No     Ta    \&No     Ta    n
 .It Sx \&Ic  Ta    Yes      Ta    Yes      Ta    >0  .It Sx \&Ic  Ta    Yes      Ta    Yes      Ta    >0
 .It Sx \&In  Ta    \&No     Ta    \&No     Ta    n  .It Sx \&In  Ta    \&No     Ta    \&No     Ta    n
 .It Sx \&Lb  Ta    \&No     Ta    \&No     Ta    1  .It Sx \&Lb  Ta    \&No     Ta    \&No     Ta    1
 .It Sx \&Li  Ta    Yes      Ta    Yes      Ta    n  .It Sx \&Li  Ta    Yes      Ta    Yes      Ta    >0
 .It Sx \&Lk  Ta    Yes      Ta    Yes      Ta    n  .It Sx \&Lk  Ta    Yes      Ta    Yes      Ta    >0
 .It Sx \&Lp  Ta    \&No     Ta    \&No     Ta    0  .It Sx \&Lp  Ta    \&No     Ta    \&No     Ta    0
 .It Sx \&Ms  Ta    Yes      Ta    Yes      Ta    >0  .It Sx \&Ms  Ta    Yes      Ta    Yes      Ta    >0
 .It Sx \&Mt  Ta    Yes      Ta    Yes      Ta    >0  .It Sx \&Mt  Ta    Yes      Ta    Yes      Ta    >0
Line 938  Memory address.
Line 941  Memory address.
 Do not use this for postal addresses.  Do not use this for postal addresses.
 .Pp  .Pp
 Examples:  Examples:
 .D1 \&.Ad [0,$]  .Dl \&.Ad [0,$]
 .D1 \&.Ad 0x00000000  .Dl \&.Ad 0x00000000
 .Ss \&An  .Ss \&An
 Author name.  Author name.
 Requires either the name of an author or one of the following arguments:  Requires either the name of an author or one of the following arguments:
Line 969  for the first author listing and
Line 972  for the first author listing and
 for all other author listings.  for all other author listings.
 .Pp  .Pp
 Examples:  Examples:
 .D1 \&.An -nosplit  .Dl \&.An -nosplit
 .D1 \&.An Kristaps Dzonsons \&Aq kristaps@bsd.lv  .Dl \&.An Kristaps Dzonsons \&Aq kristaps@bsd.lv
 .Ss \&Ao  .Ss \&Ao
 Begin a block enclosed by angle brackets.  Begin a block enclosed by angle brackets.
 Does not have any head arguments.  Does not have any head arguments.
 .Pp  .Pp
 Examples:  Examples:
 .D1 \&.Fl -key= \&Ns \&Ao \&Ar val \&Ac  .Dl \&.Fl -key= \&Ns \&Ao \&Ar val \&Ac
 .Pp  .Pp
 See also  See also
 .Sx \&Aq .  .Sx \&Aq .
Line 986  This is generally used as a grammatical device when re
Line 989  This is generally used as a grammatical device when re
 form of a function.  form of a function.
 .Pp  .Pp
 Examples:  Examples:
 .D1 \&.Fn execve \&Ap d  .Dl \&.Fn execve \&Ap d
 .Ss \&Aq  .Ss \&Aq
 Encloses its arguments in angle brackets.  Encloses its arguments in angle brackets.
 .Pp  .Pp
 Examples:  Examples:
 .D1 \&.Fl -key= \&Ns \&Aq \&Ar val  .Dl \&.Fl -key= \&Ns \&Aq \&Ar val
 .Pp  .Pp
 .Em Remarks :  .Em Remarks :
 this macro is often abused for rendering URIs, which should instead use  this macro is often abused for rendering URIs, which should instead use
Line 1012  If an argument is not provided, the string
Line 1015  If an argument is not provided, the string
 is used as a default.  is used as a default.
 .Pp  .Pp
 Examples:  Examples:
 .D1 \&.Fl o \&Ns \&Ar file1  .Dl \&.Fl o \&Ns \&Ar file1
 .D1 \&.Ar  .Dl \&.Ar
 .D1 \&.Ar arg1 , arg2 .  .Dl \&.Ar arg1 , arg2 .
 .Ss \&At  .Ss \&At
 Formats an AT&T version.  Formats an AT&T version.
 Accepts one optional argument:  Accepts one optional argument:
Line 1031  A version of
Line 1034  A version of
 Note that these arguments do not begin with a hyphen.  Note that these arguments do not begin with a hyphen.
 .Pp  .Pp
 Examples:  Examples:
 .D1 \&.At  .Dl \&.At
 .D1 \&.At V.1  .Dl \&.At V.1
 .Pp  .Pp
 See also  See also
 .Sx \&Bsx ,  .Sx \&Bsx ,
Line 1076  implementations render it poorly.
Line 1079  implementations render it poorly.
 Left- and right-justify the block.  Left- and right-justify the block.
 .It Fl literal  .It Fl literal
 Do not justify the block at all.  Do not justify the block at all.
 Preserve white space and newlines as they appear in the input, including  Preserve white space as it appears in the input.
 if it follows a macro.  
 .It Fl ragged  .It Fl ragged
 Only left-justify the block.  Only left-justify the block.
 .It Fl unfilled  .It Fl unfilled
Line 1201  Be careful in using over-long lines within a keep bloc
Line 1203  Be careful in using over-long lines within a keep bloc
 Doing so will clobber the right margin.  Doing so will clobber the right margin.
 .Ss \&Bl  .Ss \&Bl
 Begin a list.  Begin a list.
 Lists consist of items started by the  Lists consist of items specified using the
 .Sx \&It  .Sx \&It
 macro, containing a head or a body or both.  macro, containing a head or a body or both.
 The list syntax is as follows:  The list syntax is as follows:
Line 1336  See also
Line 1338  See also
 Encloses its arguments in square brackets.  Encloses its arguments in square brackets.
 .Pp  .Pp
 Examples:  Examples:
 .D1 \&.Bq 1 , \&Dv BUFSIZ  .Dl \&.Bq 1 , \&Dv BUFSIZ
 .Pp  .Pp
 .Em Remarks :  .Em Remarks :
 this macro is sometimes abused to emulate optional arguments for  this macro is sometimes abused to emulate optional arguments for
Line 1369  See also
Line 1371  See also
 Encloses its arguments in curly braces.  Encloses its arguments in curly braces.
 .Pp  .Pp
 Examples:  Examples:
 .D1 \&.Brq 1 , ... , \&Va n  .Dl \&.Brq 1 , ... , \&Va n
 .Pp  .Pp
 See also  See also
 .Sx \&Bro .  .Sx \&Bro .
Line 1378  Format the BSD/OS version provided as an argument, or 
Line 1380  Format the BSD/OS version provided as an argument, or 
 no argument is provided.  no argument is provided.
 .Pp  .Pp
 Examples:  Examples:
 .D1 \&.Bsx 1.0  .Dl \&.Bsx 1.0
 .D1 \&.Bsx  .Dl \&.Bsx
 .Pp  .Pp
 See also  See also
 .Sx \&At ,  .Sx \&At ,
Line 1398  Format the BSD version provided as an argument, or a d
Line 1400  Format the BSD version provided as an argument, or a d
 argument is provided.  argument is provided.
 .Pp  .Pp
 Examples:  Examples:
 .D1 \&.Bx 4.4  .Dl \&.Bx 4.4
 .D1 \&.Bx  .Dl \&.Bx
 .Pp  .Pp
 See also  See also
 .Sx \&At ,  .Sx \&At ,
Line 1416  This denotes strings accepted by
Line 1418  This denotes strings accepted by
 .Xr config 8 .  .Xr config 8 .
 .Pp  .Pp
 Examples:  Examples:
 .D1 \&.Cd device le0 at scode?  .Dl \&.Cd device le0 at scode?
 .Pp  .Pp
 .Em Remarks :  .Em Remarks :
 this macro is commonly abused by using quoted literals to retain  this macro is commonly abused by using quoted literals to retain
Line 1429  Command modifiers.
Line 1431  Command modifiers.
 Useful when specifying configuration options or keys.  Useful when specifying configuration options or keys.
 .Pp  .Pp
 Examples:  Examples:
 .D1 \&.Cm ControlPath  .Dl \&.Cm ControlPath
 .D1 \&.Cm ControlMaster  .Dl \&.Cm ControlMaster
 .Pp  .Pp
 See also  See also
 .Sx \&Fl .  .Sx \&Fl .
Line 1441  statements.
Line 1443  statements.
 It is followed by a newline.  It is followed by a newline.
 .Pp  .Pp
 Examples:  Examples:
 .D1 \&.D1 \&Fl abcdefgh  .Dl \&.D1 \&Fl abcdefgh
 .Pp  .Pp
 See also  See also
 .Sx \&Bd  .Sx \&Bd
Line 1480  or instead a valid canonical date as specified by
Line 1482  or instead a valid canonical date as specified by
 If a date does not conform or is empty, the current date is used.  If a date does not conform or is empty, the current date is used.
 .Pp  .Pp
 Examples:  Examples:
 .D1 \&.Dd $\&Mdocdate$  .Dl \&.Dd $\&Mdocdate$
 .D1 \&.Dd $\&Mdocdate: July 21 2007$  .Dl \&.Dd $\&Mdocdate: July 21 2007$
 .D1 \&.Dd July 21, 2007  .Dl \&.Dd July 21, 2007
 .Pp  .Pp
 See also  See also
 .Sx \&Dt  .Sx \&Dt
Line 1495  invocations.
Line 1497  invocations.
 It is followed by a newline.  It is followed by a newline.
 .Pp  .Pp
 Examples:  Examples:
 .D1 \&.Dl % mandoc mdoc.7 \e(ba less  .Dl \&.Dl % mandoc mdoc.7 \e(ba less
 .Pp  .Pp
 See also  See also
 .Sx \&Bd  .Sx \&Bd
Line 1663  or
Line 1665  or
 .El  .El
 .Pp  .Pp
 Examples:  Examples:
 .D1 \&.Dt FOO 1  .Dl \&.Dt FOO 1
 .D1 \&.Dt FOO 4 KM  .Dl \&.Dt FOO 4 KM
 .D1 \&.Dt FOO 9 i386  .Dl \&.Dt FOO 9 i386
 .Pp  .Pp
 See also  See also
 .Sx \&Dd  .Sx \&Dd
Line 1675  and
Line 1677  and
 Defined variables such as preprocessor constants.  Defined variables such as preprocessor constants.
 .Pp  .Pp
 Examples:  Examples:
 .D1 \&.Dv BUFSIZ  .Dl \&.Dv BUFSIZ
 .D1 \&.Dv STDOUT_FILENO  .Dl \&.Dv STDOUT_FILENO
 .Pp  .Pp
 See also  See also
 .Sx \&Er .  .Sx \&Er .
Line 1685  Format the DragonFly BSD version provided as an argume
Line 1687  Format the DragonFly BSD version provided as an argume
 value if no argument is provided.  value if no argument is provided.
 .Pp  .Pp
 Examples:  Examples:
 .D1 \&.Dx 2.4.1  .Dl \&.Dx 2.4.1
 .D1 \&.Dx  .Dl \&.Dx
 .Pp  .Pp
 See also  See also
 .Sx \&At ,  .Sx \&At ,
Line 1732  Note that this is a presentation term and should not b
Line 1734  Note that this is a presentation term and should not b
 stylistically decorating technical terms.  stylistically decorating technical terms.
 .Pp  .Pp
 Examples:  Examples:
 .D1 \&.Em Warnings!  .Dl \&.Em Warnings!
 .D1 \&.Em Remarks :  .Dl \&.Em Remarks :
 .Pp  .Pp
 See also  See also
 .Sx \&Bf ,  .Sx \&Bf ,
Line 1758  will emulate
Line 1760  will emulate
 Display error constants.  Display error constants.
 .Pp  .Pp
 Examples:  Examples:
 .D1 \&.Er EPERM  .Dl \&.Er EPERM
 .D1 \&.Er ENOENT  .Dl \&.Er ENOENT
 .Pp  .Pp
 See also  See also
 .Sx \&Dv .  .Sx \&Dv .
Line 1770  Environmental variables such as those specified in
Line 1772  Environmental variables such as those specified in
 .Xr environ 7 .  .Xr environ 7 .
 .Pp  .Pp
 Examples:  Examples:
 .D1 \&.Ev DISPLAY  .Dl \&.Ev DISPLAY
 .D1 \&.Ev PATH  .Dl \&.Ev PATH
 .Ss \&Ex  .Ss \&Ex
 Insert a standard sentence regarding exit values.  Insert a standard sentence regarding exit values.
 Its syntax is as follows:  Its syntax is as follows:
Line 1811  Furthermore, if the following macro is another
Line 1813  Furthermore, if the following macro is another
 the last argument will also have a trailing comma.  the last argument will also have a trailing comma.
 .Pp  .Pp
 Examples:  Examples:
 .D1 \&.Fa \(dqconst char *p\(dq  .Dl \&.Fa \(dqconst char *p\(dq
 .D1 \&.Fa \(dqint a\(dq \(dqint b\(dq \(dqint c\(dq  .Dl \&.Fa \(dqint a\(dq \(dqint b\(dq \(dqint c\(dq
 .D1 \&.Fa foo  .Dl \&.Fa foo
 .Pp  .Pp
 See also  See also
 .Sx \&Fo .  .Sx \&Fo .
Line 1841  If the argument is a macro, a hyphen is prefixed to th
Line 1843  If the argument is a macro, a hyphen is prefixed to th
 output.  output.
 .Pp  .Pp
 Examples:  Examples:
 .D1 \&.Fl a b c  .Dl \&.Fl a b c
 .D1 \&.Fl \&Pf a b  .Dl \&.Fl \&Pf a b
 .D1 \&.Fl  .Dl \&.Fl
 .D1 \&.Op \&Fl o \&Ns \&Ar file  .Dl \&.Op \&Fl o \&Ns \&Ar file
 .Pp  .Pp
 See also  See also
 .Sx \&Cm .  .Sx \&Cm .
Line 1863  are delimited by commas.
Line 1865  are delimited by commas.
 If no arguments are specified, blank parenthesis are output.  If no arguments are specified, blank parenthesis are output.
 .Pp  .Pp
 Examples:  Examples:
 .D1 \&.Fn "int funcname" "int arg0" "int arg1"  .Dl \&.Fn "int funcname" "int arg0" "int arg1"
 .D1 \&.Fn funcname "int arg0"  .Dl \&.Fn funcname "int arg0"
 .D1 \&.Fn funcname arg0  .Dl \&.Fn funcname arg0
 .Bd -literal -offset indent -compact  .Bd -literal -offset indent -compact
 \&.Ft functype  \&.Ft functype
 \&.Fn funcname  \&.Fn funcname
Line 1916  Its syntax is as follows:
Line 1918  Its syntax is as follows:
 .D1 Pf \. Sx \&Ft Cm functype  .D1 Pf \. Sx \&Ft Cm functype
 .Pp  .Pp
 Examples:  Examples:
 .D1 \&.Ft int  .Dl \&.Ft int
 .Bd -literal -offset indent -compact  .Bd -literal -offset indent -compact
 \&.Ft functype  \&.Ft functype
 \&.Fn funcname  \&.Fn funcname
Line 1934  version provided as an argument, or a default value
Line 1936  version provided as an argument, or a default value
 if no argument is provided.  if no argument is provided.
 .Pp  .Pp
 Examples:  Examples:
 .D1 \&.Fx 7.1  .Dl \&.Fx 7.1
 .D1 \&.Fx  .Dl \&.Fx
 .Pp  .Pp
 See also  See also
 .Sx \&At ,  .Sx \&At ,
Line 1955  This is similar to
Line 1957  This is similar to
 but used for instructions rather than values.  but used for instructions rather than values.
 .Pp  .Pp
 Examples:  Examples:
 .D1 \&.Ic hash  .Dl \&.Ic hash
 .D1 \&.Ic alias  .Dl \&.Ic alias
 .Pp  .Pp
 Note that using  Note that using
 .Sx \&Bd Fl literal  .Sx \&Bd Fl literal
Line 1977  preceded by
Line 1979  preceded by
 the arguments is enclosed in angle brackets.  the arguments is enclosed in angle brackets.
 .Pp  .Pp
 Examples:  Examples:
 .D1 \&.In sys/types  .Dl \&.In sys/types
 .Pp  .Pp
 See also  See also
 .Sx MANUAL STRUCTURE .  .Sx MANUAL STRUCTURE .
Line 2057  phrases on an
Line 2059  phrases on an
 .Sx \&It ,  .Sx \&It ,
 for example,  for example,
 .Pp  .Pp
 .D1 .It \(dqcol1 ; <TAB> col2 ;\(dq \&;  .Dl .It \(dqcol1 ; <TAB> col2 ;\(dq \&;
 .Pp  .Pp
 will preserve the semicolon whitespace except for the last.  will preserve the semicolon whitespace except for the last.
 .Pp  .Pp
Line 2084  section as described in
Line 2086  section as described in
 .Sx MANUAL STRUCTURE .  .Sx MANUAL STRUCTURE .
 .Pp  .Pp
 Examples:  Examples:
 .D1 \&.Lb libz  .Dl \&.Lb libz
 .D1 \&.Lb mdoc  .Dl \&.Lb mdoc
 .Ss \&Li  .Ss \&Li
 Denotes text that should be in a literal font mode.  Denotes text that should be in a literal font mode.
 Note that this is a presentation term and should not be used for  Note that this is a presentation term and should not be used for
Line 2103  Its syntax is as follows:
Line 2105  Its syntax is as follows:
 .D1 Pf \. Sx \&Lk Cm uri Op Cm name  .D1 Pf \. Sx \&Lk Cm uri Op Cm name
 .Pp  .Pp
 Examples:  Examples:
 .D1 \&.Lk http://bsd.lv \*qThe BSD.lv Project\*q  .Dl \&.Lk http://bsd.lv \*qThe BSD.lv Project\*q
 .D1 \&.Lk http://bsd.lv  .Dl \&.Lk http://bsd.lv
 .Pp  .Pp
 See also  See also
 .Sx \&Mt .  .Sx \&Mt .
Line 2118  Its syntax is as follows:
Line 2120  Its syntax is as follows:
 .D1 Pf \. Sx \&Ms Cm symbol  .D1 Pf \. Sx \&Ms Cm symbol
 .Pp  .Pp
 Examples:  Examples:
 .D1 \&.Ms sigma  .Dl \&.Ms sigma
 .D1 \&.Ms aleph  .Dl \&.Ms aleph
 .Ss \&Mt  .Ss \&Mt
 Format a  Format a
 .Dq mailto:  .Dq mailto:
 hyperlink.  hyperlink.
 If an argument is not provided, the string  
 .Dq \(ti  
 is used as a default.  
 Its syntax is as follows:  Its syntax is as follows:
 .Pp  .Pp
 .D1 Pf \. Sx \&Mt Cm address  .D1 Pf \. Sx \&Mt Cm address
 .Pp  .Pp
 Examples:  Examples:
 .D1 \&.Mt discuss@manpages.bsd.lv  .Dl \&.Mt discuss@manpages.bsd.lv
 .Ss \&Nd  .Ss \&Nd
 A one line description of the manual's content.  A one line description of the manual's content.
 This may only be invoked in the  This may only be invoked in the
Line 2142  section subsequent the
Line 2141  section subsequent the
 macro.  macro.
 .Pp  .Pp
 Examples:  Examples:
 .D1 \&.Sx \&Nd mdoc language reference  .Dl \&.Sx \&Nd mdoc language reference
 .D1 \&.Sx \&Nd format and display UNIX manuals  .Dl \&.Sx \&Nd format and display UNIX manuals
 .Pp  .Pp
 The  The
 .Sx \&Nd  .Sx \&Nd
Line 2200  A
Line 2199  A
 macro used to terminate prior macro contexts.  macro used to terminate prior macro contexts.
 .Pp  .Pp
 Examples:  Examples:
 .D1 \&.Sx \&Fl ab \&No cd \&Fl ef  .Dl \&.Sx \&Fl ab \&No cd \&Fl ef
 .Ss \&Ns  .Ss \&Ns
 Suppress a space.  Suppress a space.
 Following invocation, text is interpreted as free-form text until a  Following invocation, text is interpreted as free-form text until a
 macro is encountered.  macro is encountered.
 .Pp  .Pp
   This has no effect when invoked at the start of a macro line.
   .Pp
 Examples:  Examples:
 .D1 \&.Fl o \&Ns \&Ar output  .Dl \&.Fl o \&Ns \&Ar output
 .Pp  .Pp
 See also  See also
 .Sx \&No  .Sx \&No
Line 2220  version provided as an argument, or a default value if
Line 2221  version provided as an argument, or a default value if
 no argument is provided.  no argument is provided.
 .Pp  .Pp
 Examples:  Examples:
 .D1 \&.Nx 5.01  .Dl \&.Nx 5.01
 .D1 \&.Nx  .Dl \&.Nx
 .Pp  .Pp
 See also  See also
 .Sx \&At ,  .Sx \&At ,
Line 2252  Used when listing options to command-line utilities.
Line 2253  Used when listing options to command-line utilities.
 Prints the argument(s) in brackets.  Prints the argument(s) in brackets.
 .Pp  .Pp
 Examples:  Examples:
 .D1 \&.Op \&Fl a \&Ar b  .Dl \&.Op \&Fl a \&Ar b
 .D1 \&.Op \&Ar a | b  .Dl \&.Op \&Ar a | b
 .Pp  .Pp
 See also  See also
 .Sx \&Oo .  .Sx \&Oo .
Line 2274  Left unspecified, it defaults to the local operating s
Line 2275  Left unspecified, it defaults to the local operating s
 This is the suggested form.  This is the suggested form.
 .Pp  .Pp
 Examples:  Examples:
 .D1 \&.Os  .Dl \&.Os
 .D1 \&.Os KTH/CSC/TCS  .Dl \&.Os KTH/CSC/TCS
 .D1 \&.Os BSD 4.3  .Dl \&.Os BSD 4.3
 .Pp  .Pp
 See also  See also
 .Sx \&Dd  .Sx \&Dd
Line 2294  version provided as an argument, or a default value
Line 2295  version provided as an argument, or a default value
 if no argument is provided.  if no argument is provided.
 .Pp  .Pp
 Examples:  Examples:
 .D1 \&.Ox 4.5  .Dl \&.Ox 4.5
 .D1 \&.Ox  .Dl \&.Ox
 .Pp  .Pp
 See also  See also
 .Sx \&At ,  .Sx \&At ,
Line 2308  and
Line 2309  and
 .Sx \&Ux .  .Sx \&Ux .
 .Ss \&Pa  .Ss \&Pa
 A file-system path.  A file-system path.
   If an argument is not provided, the string
   .Dq \(ti
   is used as a default.
 .Pp  .Pp
 Examples:  Examples:
 .D1 \&.Pa /usr/bin/mandoc  .Dl \&.Pa /usr/bin/mandoc
 .D1 \&.Pa /usr/share/man/man7/mdoc.7  .Dl \&.Pa /usr/share/man/man7/mdoc.7
 .Pp  .Pp
 See also  See also
 .Sx \&Lk .  .Sx \&Lk .
Line 2331  The
Line 2335  The
 argument may be a macro.  argument may be a macro.
 .Pp  .Pp
 Examples:  Examples:
 .D1 \&.Pf \e. \&Sx \&Pf \&Cm prefix suffix  .Dl \&.Pf \e. \&Sx \&Pf \&Cm prefix suffix
 .Ss \&Po  .Ss \&Po
 Multi-line version of  Multi-line version of
 .Sx \&Pq .  .Sx \&Pq .
Line 2591  The referenced section or sub-section name must be ide
Line 2595  The referenced section or sub-section name must be ide
 enclosed argument, including whitespace.  enclosed argument, including whitespace.
 .Pp  .Pp
 Examples:  Examples:
 .D1 \&.Sx MANUAL STRUCTURE  .Dl \&.Sx MANUAL STRUCTURE
   .Pp
   See also
   .Sx \&Sh
   and
   .Sx \&Ss .
 .Ss \&Sy  .Ss \&Sy
 Format enclosed arguments in symbolic  Format enclosed arguments in symbolic
 .Pq Dq boldface .  .Pq Dq boldface .
Line 2607  and
Line 2616  and
 Format a tradename.  Format a tradename.
 .Pp  .Pp
 Examples:  Examples:
 .D1 \&.Tn IBM  .Dl \&.Tn IBM
 .Ss \&Ud  .Ss \&Ud
 Prints out  Prints out
 .Dq currently under development .  .Dq currently under development .
Line 2616  Format the UNIX name.
Line 2625  Format the UNIX name.
 Accepts no argument.  Accepts no argument.
 .Pp  .Pp
 Examples:  Examples:
 .D1 \&.Ux  .Dl \&.Ux
 .Pp  .Pp
 See also  See also
 .Sx \&At ,  .Sx \&At ,
Line 2631  and
Line 2640  and
 A variable name.  A variable name.
 .Pp  .Pp
 Examples:  Examples:
 .D1 \&.Va foo  .Dl \&.Va foo
 .D1 \&.Va const char *bar ;  .Dl \&.Va const char *bar ;
 .Ss \&Vt  .Ss \&Vt
 A variable type.  A variable type.
 This is also used for indicating global variables in the  This is also used for indicating global variables in the
Line 2651  Note that this should not be confused with
Line 2660  Note that this should not be confused with
 which is used for function return types.  which is used for function return types.
 .Pp  .Pp
 Examples:  Examples:
 .D1 \&.Vt unsigned char  .Dl \&.Vt unsigned char
 .D1 \&.Vt extern const char * const sys_signame[] \&;  .Dl \&.Vt extern const char * const sys_signame[] \&;
 .Pp  .Pp
 See also  See also
 .Sx MANUAL STRUCTURE  .Sx MANUAL STRUCTURE
Line 2662  and
Line 2671  and
 Close a scope opened by  Close a scope opened by
 .Sx \&Xo .  .Sx \&Xo .
 .Ss \&Xo  .Ss \&Xo
 Open an extension scope.  Extend the header of an
 This macro originally existed to extend the 9-argument limit of troff;  .Sx \&It
 since this limit has been lifted, the macro has been deprecated.  macro or the body of a partial-implicit block macro
   beyond the end of the input line.
   This macro originally existed to work around the 9-argument limit
   of historic
   .Xr roff 7 .
 .Ss \&Xr  .Ss \&Xr
 Link to another manual  Link to another manual
 .Pq Qq cross-reference .  .Pq Qq cross-reference .
Line 2686  This behaviour is for compatibility with
Line 2699  This behaviour is for compatibility with
 GNU troff.  GNU troff.
 .Pp  .Pp
 Examples:  Examples:
 .D1 \&.Xr mandoc 1  .Dl \&.Xr mandoc 1
 .D1 \&.Xr mandoc 1 \&;  .Dl \&.Xr mandoc 1 \&;
 .D1 \&.Xr mandoc 1 \&Ns s behaviour  .Dl \&.Xr mandoc 1 \&Ns s behaviour
 .Ss \&br  .Ss \&br
 Emits a line-break.  Emits a line-break.
 This macro should not be used; it is implemented for compatibility with  This macro should not be used; it is implemented for compatibility with
Line 2718  troff implementations, at this time limited to GNU tro
Line 2731  troff implementations, at this time limited to GNU tro
 .Pq Qq groff .  .Pq Qq groff .
 The term  The term
 .Qq historic groff  .Qq historic groff
 refers to groff versions before the  refers to groff versions before 1.17,
   which featured a significant update of the
 .Pa doc.tmac  .Pa doc.tmac
 file re-write  file.
 .Pq somewhere between 1.15 and 1.19 .  
 .Pp  .Pp
 Heirloom troff, the other significant troff implementation accepting  Heirloom troff, the other significant troff implementation accepting
 \-mdoc, is similar to historic groff.  \-mdoc, is similar to historic groff.
Line 2731  The following problematic behaviour is found in groff:
Line 2744  The following problematic behaviour is found in groff:
 .Pp  .Pp
 .Bl -dash -compact  .Bl -dash -compact
 .It  .It
   Display macros
   .Po
   .Sx \&Bd ,
   .Sx \&Dl ,
   and
   .Sx \&D1
   .Pc
   may not be nested.
   \*[hist]
   .It
 .Sx \&At  .Sx \&At
 with unknown arguments produces no output at all.  with unknown arguments produces no output at all.
 \*[hist]  \*[hist]
Line 2812  can only be called by other macros, but not at the beg
Line 2835  can only be called by other macros, but not at the beg
 .Sx \&%C  .Sx \&%C
 is not implemented.  is not implemented.
 .It  .It
   Historic groff only allows up to eight or nine arguments per macro input
   line, depending on the exact situation.
   Providing more arguments causes garbled output.
   The number of arguments on one input line is not limited with mandoc.
   .It
 Historic groff has many un-callable macros.  Historic groff has many un-callable macros.
 Most of these (excluding some block-level macros) are callable  Most of these (excluding some block-level macros) are callable
 in new groff and mandoc.  in new groff and mandoc.
Line 2879  This is not supported by mandoc.
Line 2907  This is not supported by mandoc.
 .Sh SEE ALSO  .Sh SEE ALSO
 .Xr man 1 ,  .Xr man 1 ,
 .Xr mandoc 1 ,  .Xr mandoc 1 ,
   .Xr eqn 7 ,
   .Xr man 7 ,
 .Xr mandoc_char 7  .Xr mandoc_char 7
   .Xr roff 7 ,
   .Xr tbl 7
 .Sh HISTORY  .Sh HISTORY
 The  The
 .Nm  .Nm
Legend:
Removed from v.1.164  
changed lines
  Added in v.1.180
CVSweb