[BACK]Return to mdoc.7 CVS log [TXT][DIR] Up to [cvsweb.bsd.lv] / mandoc

Diff for /mandoc/mdoc.7 between version 1.201 and 1.243

version 1.201, 2011/08/17 22:20:14 version 1.243, 2014/11/28 18:09:01
Line 1 
Line 1 
 .\"     $Id$  .\"     $Id$
 .\"  .\"
 .\" Copyright (c) 2009, 2010, 2011 Kristaps Dzonsons <kristaps@bsd.lv>  .\" Copyright (c) 2009, 2010, 2011 Kristaps Dzonsons <kristaps@bsd.lv>
 .\" Copyright (c) 2010 Ingo Schwarze <schwarze@openbsd.org>  .\" Copyright (c) 2010, 2011, 2013 Ingo Schwarze <schwarze@openbsd.org>
 .\"  .\"
 .\" Permission to use, copy, modify, and distribute this software for any  .\" Permission to use, copy, modify, and distribute this software for any
 .\" purpose with or without fee is hereby granted, provided that the above  .\" purpose with or without fee is hereby granted, provided that the above
Line 20 
Line 20 
 .Os  .Os
 .Sh NAME  .Sh NAME
 .Nm mdoc  .Nm mdoc
 .Nd mdoc language reference  .Nd semantic markup language for formatting manual pages
 .Sh DESCRIPTION  .Sh DESCRIPTION
 The  The
 .Nm mdoc  .Nm mdoc
 language is used to format  language supports authoring of manual pages for the
 .Bx  .Xr man 1
 .Ux  utility by allowing semantic annotations of words, phrases,
 manuals.  page sections and complete manual pages.
 This reference document describes its syntax, structure, and  Such annotations are used by formatting tools to achieve a uniform
 usage.  presentation across all manuals written in
 The reference implementation for  .Nm ,
   and to support hyperlinking if supported by the output medium.
   .Pp
   This reference document describes the structure of manual pages
   and the syntax and usage of the
 .Nm  .Nm
 formatting is  language.
   The reference implementation of a parsing and formatting tool is
 .Xr mandoc 1 ;  .Xr mandoc 1 ;
 the  the
 .Sx COMPATIBILITY  .Sx COMPATIBILITY
 section describes compatibility with other implementations.  section describes compatibility with other implementations.
 .Pp  .Pp
 An  In an
 .Nm  .Nm
 document follows simple rules: lines beginning with the control  document, lines beginning with the control character
 character  
 .Sq \&.  .Sq \&.
 are parsed for macros.  are called
 Lines not beginning with the control character are  .Dq macro lines .
 interpreted within the scope of prior macros:  The first word is the macro name.
   It consists of two or three letters.
   Most macro names begin with a capital letter.
   For a list of available macros, see
   .Sx MACRO OVERVIEW .
   The words following the macro name are arguments to the macro, optionally
   including the names of other, callable macros; see
   .Sx MACRO SYNTAX
   for details.
   .Pp
   Lines not beginning with the control character are called
   .Dq text lines .
   They provide free-form text to be printed; the formatting of the text
   depends on the respective processing context:
 .Bd -literal -offset indent  .Bd -literal -offset indent
 \&.Sh Macro lines change control state.  \&.Sh Macro lines change control state.
 Text lines are interpreted within the current state.  Text lines are interpreted within the current state.
 .Ed  .Ed
 .Sh LANGUAGE SYNTAX  .Pp
   Many aspects of the basic syntax of the
 .Nm  .Nm
 documents may contain only graphable 7-bit ASCII characters, the space  language are based on the
 character, and, in certain circumstances, the tab character.  .Xr roff 7
 The back-space character  language; see the
 .Sq \e  .Em LANGUAGE SYNTAX
 indicates the start of an escape sequence for  
 .Sx Comments ,  
 .Sx Predefined Strings ,  
 and  and
 .Sx Special Characters .  .Em MACRO SYNTAX
 .Ss Comments  sections in the
 Text following an escaped double-quote  .Xr roff 7
 .Sq \e\*q ,  manual for details, in particular regarding
 whether in a macro or text line, is ignored to the end of  comments, escape sequences, whitespace, and quoting.
 line.  However, using
 A macro line beginning with a control character and comment escape  .Xr roff 7
 .Sq \&.\e\*q  requests in
 is also ignored.  
 Furthermore,  
 macro lines with only a control character and optional trailing  
 whitespace are  
 stripped from input.  
 .Pp  
 Examples:  
 .Bd -literal -offset indent -compact  
 \&.\e\*q This is a comment line.  
 \&.\e\*q The next line is ignored:  
 \&.  
 \&.Em Emphasis \e\*q This is also a comment.  
 .Ed  
 .Ss Special Characters  
 Special characters are used to encode special glyphs and are rendered  
 differently across output media.  
 They may occur in both macro and text lines.  
 Sequences begin with the escape character  
 .Sq \e  
 followed by either an open-parenthesis  
 .Sq \&(  
 for two-character sequences; an open-bracket  
 .Sq \&[  
 for n-character sequences (terminated at a close-bracket  
 .Sq \&] ) ;  
 or a single one character sequence.  
 .Pp  
 Examples:  
 .Bl -tag -width Ds -offset indent -compact  
 .It \e(em  
 em dash  
 .It \ee  
 backslash  
 .El  
 .Pp  
 See  
 .Xr mandoc_char 7  
 for a complete list.  
 .Ss Text Decoration  
 Terms may be text-decorated using the  
 .Sq \ef  
 escape followed by an indicator: B (bold), I (italic), R (regular), or P  
 (revert to previous mode).  
 A numerical representation 3, 2, or 1 (bold, italic, and regular,  
 respectively) may be used instead.  
 If a macro opens a font scope after calling  
 .Sq \ef ,  
 such as with  
 .Sx \&Bf ,  
 the  
 .Sq \ef  
 mode will be restored upon exiting the  
 .Sx \&Bf  
 scope.  
 .Pp  
 Examples:  
 .Bl -tag -width Ds -offset indent -compact  
 .It \efBbold\efR  
 write in bold, then switch to regular  
 .It \efIitalic\efP  
 write in italic, then return to previous  
 .El  
 .Pp  
 Text decoration is  
 .Em not  
 recommended for  
 .Nm ,  
 which encourages semantic annotation.  
 .Ss Predefined Strings  
 Predefined strings, like  
 .Sx Special Characters ,  
 mark special output glyphs.  
 Predefined strings are escaped with the slash-asterisk,  
 .Sq \e* :  
 single-character  
 .Sq \e*X ,  
 two-character  
 .Sq \e*(XX ,  
 and N-character  
 .Sq \e*[N] .  
 .Pp  
 Examples:  
 .Bl -tag -width Ds -offset indent -compact  
 .It \e*(Am  
 ampersand  
 .It \e*(Ba  
 vertical bar  
 .El  
 .Pp  
 These strings are set using  
 .Xr roff 7 ,  
 although  
 .Nm  .Nm
 consists of several pre-set escapes listed in  documents is discouraged;
 .Xr mandoc_char 7 .  .Xr mandoc 1
 .Ss Whitespace  supports some of them merely for backward compatibility.
 Whitespace consists of the space character.  
 In text lines, whitespace is preserved within a line.  
 In macro lines, whitespace delimits arguments and is discarded.  
 .Pp  
 Unescaped trailing spaces are stripped from text line input unless in a  
 literal context.  
 In general, trailing whitespace on any input line is discouraged for  
 reasons of portability.  
 In the rare case that a blank character is needed at the end of an  
 input line, it may be forced by  
 .Sq \e\ \e& .  
 .Pp  
 Blank text lines, which may include whitespace, are only permitted  
 within literal contexts.  
 If the first character of a text line is a space, that line is printed  
 with a leading newline.  
 .Ss Quotation  
 Macro arguments may be quoted with double-quotes; in this case,  
 whitespace within the quotes is retained as part of the argument.  
 For example,  
 .Pp  
 .D1 Pf \. \&Fn strlen "\(dqconst char *s\(dq"  
 .Pp  
 renders as  
 .Sq Fn strlen "const char *s" ,  
 while  
 .Pp  
 .D1 Pf \. \&Fn strlen "const char *s"  
 .Pp  
 would produce  
 .Sq Fn strlen const char *s .  
 .Pp  
 A quoted argument begins with a double-quote preceded by whitespace.  
 The next double-quote not pairwise adjacent to another double-quote  
 terminates the literal, regardless of surrounding whitespace.  
 .Pp  
 In unquoted arguments, space characters can alternatively be included  
 by preceding them with a backslash  
 .Pq Sq \e\~ ,  
 but quoting is usually better for clarity.  
 .Pp  
 Note that any quoted text, even if it would cause a macro invocation  
 when unquoted, is considered literal text.  
 Thus, the following produces  
 .Sq Op "Fl a" :  
 .Bd -literal -offset indent  
 \&.Op "Fl a"  
 .Ed  
 .Pp  
 In text lines, quotes are regarded as opaque text.  
 .Ss Scaling Widths  
 Many macros support scaled widths for their arguments.  
 The syntax for a scaled width is  
 .Sq Li [+-]?[0-9]*.[0-9]*[:unit:] ,  
 where a decimal must be preceded or proceeded by at least one digit.  
 Negative numbers, while accepted, are truncated to zero.  
 .Pp  
 The following scaling units are accepted:  
 .Pp  
 .Bl -tag -width Ds -offset indent -compact  
 .It c  
 centimetre  
 .It i  
 inch  
 .It P  
 pica (~1/6 inch)  
 .It p  
 point (~1/72 inch)  
 .It f  
 synonym for  
 .Sq u  
 .It v  
 default vertical span  
 .It m  
 width of rendered  
 .Sq m  
 .Pq em  
 character  
 .It n  
 width of rendered  
 .Sq n  
 .Pq en  
 character  
 .It u  
 default horizontal span  
 .It M  
 mini-em (~1/100 em)  
 .El  
 .Pp  
 Using anything other than  
 .Sq m ,  
 .Sq n ,  
 .Sq u ,  
 or  
 .Sq v  
 is necessarily non-portable across output media.  
 See  
 .Sx COMPATIBILITY .  
 .Pp  
 Examples:  
 .Bl -tag -width Ds -offset indent -compact  
 .It \&.Bl -tag -width 2i  
 two-inch tagged list indentation  
 .Pq see Sx \&Bl  
 .It \&.sp 2v  
 two vertical spaces  
 .Pq see Sx \&sp  
 .El  
 .Ss Sentence Spacing  
 Sentences should terminate at the end of an input line.  
 By doing this, a formatter will be able to apply the proper amount of  
 spacing after the end of sentence (unescaped) period, exclamation mark,  
 or question mark followed by zero or more non-sentence closing  
 delimiters  
 .Po  
 .Sq \&) ,  
 .Sq \&] ,  
 .Sq \&' ,  
 .Sq \&"  
 .Pc .  
 .Pp  
 The proper spacing is also intelligently preserved if a sentence ends at  
 the boundary of a macro line.  
 .Pp  
 Examples:  
 .Bd -literal -offset indent -compact  
 Do not end sentences mid-line like this.  Instead,  
 end a sentence like this.  
 A macro would end like this:  
 \&.Xr mandoc 1 \&.  
 .Ed  
 .Sh MANUAL STRUCTURE  .Sh MANUAL STRUCTURE
 A well-formed  A well-formed
 .Nm  .Nm
Line 332  file for a utility
Line 124  file for a utility
 \&.Sh NAME  \&.Sh NAME
 \&.Nm progname  \&.Nm progname
 \&.Nd one line about what it does  \&.Nd one line about what it does
 \&.\e\*q .Sh LIBRARY  \&.\e\(dq .Sh LIBRARY
 \&.\e\*q For sections 2, 3, & 9 only.  \&.\e\(dq For sections 2, 3, and 9 only.
 \&.\e\*q Not used in OpenBSD.  \&.\e\(dq Not used in OpenBSD.
 \&.Sh SYNOPSIS  \&.Sh SYNOPSIS
 \&.Nm progname  \&.Nm progname
 \&.Op Fl options  \&.Op Fl options
Line 343  file for a utility
Line 135  file for a utility
 The  The
 \&.Nm  \&.Nm
 utility processes files ...  utility processes files ...
 \&.\e\*q .Sh IMPLEMENTATION NOTES  \&.\e\(dq .Sh CONTEXT
 \&.\e\*q Not used in OpenBSD.  \&.\e\(dq For section 9 functions only.
 \&.\e\*q .Sh RETURN VALUES  \&.\e\(dq .Sh IMPLEMENTATION NOTES
 \&.\e\*q For sections 2, 3, & 9 only.  \&.\e\(dq Not used in OpenBSD.
 \&.\e\*q .Sh ENVIRONMENT  \&.\e\(dq .Sh RETURN VALUES
 \&.\e\*q For sections 1, 6, 7, & 8 only.  \&.\e\(dq For sections 2, 3, and 9 function return values only.
 \&.\e\*q .Sh FILES  \&.\e\(dq .Sh ENVIRONMENT
 \&.\e\*q .Sh EXIT STATUS  \&.\e\(dq For sections 1, 6, 7, and 8 only.
 \&.\e\*q For sections 1, 6, & 8 only.  \&.\e\(dq .Sh FILES
 \&.\e\*q .Sh EXAMPLES  \&.\e\(dq .Sh EXIT STATUS
 \&.\e\*q .Sh DIAGNOSTICS  \&.\e\(dq For sections 1, 6, and 8 only.
 \&.\e\*q For sections 1, 4, 6, 7, & 8 only.  \&.\e\(dq .Sh EXAMPLES
 \&.\e\*q .Sh ERRORS  \&.\e\(dq .Sh DIAGNOSTICS
 \&.\e\*q For sections 2, 3, & 9 only.  \&.\e\(dq For sections 1, 4, 6, 7, 8, and 9 printf/stderr messages only.
 \&.\e\*q .Sh SEE ALSO  \&.\e\(dq .Sh ERRORS
 \&.\e\*q .Xr foobar 1  \&.\e\(dq For sections 2, 3, 4, and 9 errno settings only.
 \&.\e\*q .Sh STANDARDS  \&.\e\(dq .Sh SEE ALSO
 \&.\e\*q .Sh HISTORY  \&.\e\(dq .Xr foobar 1
 \&.\e\*q .Sh AUTHORS  \&.\e\(dq .Sh STANDARDS
 \&.\e\*q .Sh CAVEATS  \&.\e\(dq .Sh HISTORY
 \&.\e\*q .Sh BUGS  \&.\e\(dq .Sh AUTHORS
 \&.\e\*q .Sh SECURITY CONSIDERATIONS  \&.\e\(dq .Sh CAVEATS
 \&.\e\*q Not used in OpenBSD.  \&.\e\(dq .Sh BUGS
   \&.\e\(dq .Sh SECURITY CONSIDERATIONS
   \&.\e\(dq Not used in OpenBSD.
 .Ed  .Ed
 .Pp  .Pp
 The sections in an  The sections in an
Line 446  macros should follow C header-file conventions.
Line 240  macros should follow C header-file conventions.
 .Pp  .Pp
 And for the third, configurations (section 4):  And for the third, configurations (section 4):
 .Bd -literal -offset indent  .Bd -literal -offset indent
 \&.Cd \*qit* at isa? port 0x2e\*q  \&.Cd \(dqit* at isa? port 0x2e\(dq
 \&.Cd \*qit* at isa? port 0x4e\*q  \&.Cd \(dqit* at isa? port 0x4e\(dq
 .Ed  .Ed
 .Pp  .Pp
 Manuals not in these sections generally don't need a  Manuals not in these sections generally don't need a
Line 526  macro followed by a non-standard section name, and eac
Line 320  macro followed by a non-standard section name, and eac
 several subsections, like in the present  several subsections, like in the present
 .Nm  .Nm
 manual.  manual.
   .It Em CONTEXT
   This section lists the contexts in which functions can be called in section 9.
   The contexts are autoconf, process, or interrupt.
 .It Em IMPLEMENTATION NOTES  .It Em IMPLEMENTATION NOTES
 Implementation-specific notes should be kept here.  Implementation-specific notes should be kept here.
 This is useful when implementing standard functions that may have side  This is useful when implementing standard functions that may have side
Line 566  Example usages.
Line 363  Example usages.
 This often contains snippets of well-formed, well-tested invocations.  This often contains snippets of well-formed, well-tested invocations.
 Make sure that examples work properly!  Make sure that examples work properly!
 .It Em DIAGNOSTICS  .It Em DIAGNOSTICS
 Documents error conditions.  Documents error messages.
 This is most useful in section 4 manuals.  In section 4 and 9 manuals, these are usually messages printed by the
   kernel to the console and to the kernel log.
   In section 1, 6, 7, and 8, these are usually messages printed by
   userland programs to the standard error output.
   .Pp
 Historically, this section was used in place of  Historically, this section was used in place of
 .Em EXIT STATUS  .Em EXIT STATUS
 for manuals in sections 1, 6, and 8; however, this practise is  for manuals in sections 1, 6, and 8; however, this practise is
Line 577  See
Line 378  See
 .Sx \&Bl  .Sx \&Bl
 .Fl diag .  .Fl diag .
 .It Em ERRORS  .It Em ERRORS
 Documents error handling in sections 2, 3, and 9.  Documents
   .Xr errno 2
   settings in sections 2, 3, 4, and 9.
 .Pp  .Pp
 See  See
 .Sx \&Er .  .Sx \&Er .
Line 585  See
Line 388  See
 References other manuals with related topics.  References other manuals with related topics.
 This section should exist for most manuals.  This section should exist for most manuals.
 Cross-references should conventionally be ordered first by section, then  Cross-references should conventionally be ordered first by section, then
 alphabetically.  alphabetically (ignoring case).
 .Pp  .Pp
 References to other documentation concerning the topic of the manual page,  References to other documentation concerning the topic of the manual page,
 for example authoritative books or journal articles, may also be  for example authoritative books or journal articles, may also be
Line 621  in this section.
Line 424  in this section.
 .It Em SECURITY CONSIDERATIONS  .It Em SECURITY CONSIDERATIONS
 Documents any security precautions that operators should consider.  Documents any security precautions that operators should consider.
 .El  .El
 .Sh MACRO SYNTAX  .Sh MACRO OVERVIEW
 Macros are one to three three characters in length and begin with a  This overview is sorted such that macros of similar purpose are listed
 control character,  together, to help find the best macro for any given purpose.
 .Sq \&. ,  Deprecated macros are not included in the overview, but can be found below
 at the beginning of the line.  in the alphabetical
 An arbitrary amount of whitespace may sit between the control character  .Sx MACRO REFERENCE .
 and the macro name.  .Ss Document preamble and NAME section macros
 Thus, the following are equivalent:  .Bl -column "Brq, Bro, Brc" description
 .Bd -literal -offset indent  .It Sx \&Dd Ta document date: Cm $\&Mdocdate$ | Ar month day , year
 \&.Pp  .It Sx \&Dt Ta document title: Ar TITLE section Op Ar volume | arch
 \&.\ \ \ \&Pp  .It Sx \&Os Ta operating system version: Op Ar system Op Ar version
 .Ed  .It Sx \&Nm Ta document name (one argument)
 .Pp  .It Sx \&Nd Ta document description (one line)
 The syntax of a macro depends on its classification.  
 In this section,  
 .Sq \-arg  
 refers to macro arguments, which may be followed by zero or more  
 .Sq parm  
 parameters;  
 .Sq \&Yo  
 opens the scope of a macro; and if specified,  
 .Sq \&Yc  
 closes it out.  
 .Pp  
 The  
 .Em Callable  
 column indicates that the macro may also be called by passing its name  
 as an argument to another macro.  
 For example,  
 .Sq \&.Op \&Fl O \&Ar file  
 produces  
 .Sq Op Fl O Ar file .  
 To prevent a macro call and render the macro name literally,  
 escape it by prepending a zero-width space,  
 .Sq \e& .  
 For example,  
 .Sq \&Op \e&Fl O  
 produces  
 .Sq Op \&Fl O .  
 If a macro is not callable but its name appears as an argument  
 to another macro, it is interpreted as opaque text.  
 For example,  
 .Sq \&.Fl \&Sh  
 produces  
 .Sq Fl \&Sh .  
 .Pp  
 The  
 .Em Parsed  
 column indicates whether the macro may call other macros by receiving  
 their names as arguments.  
 If a macro is not parsed but the name of another macro appears  
 as an argument, it is interpreted as opaque text.  
 .Pp  
 The  
 .Em Scope  
 column, if applicable, describes closure rules.  
 .Ss Block full-explicit  
 Multi-line scope closed by an explicit closing macro.  
 All macros contains bodies; only  
 .Sx \&Bf  
 and  
 .Pq optionally  
 .Sx \&Bl  
 contain a head.  
 .Bd -literal -offset indent  
 \&.Yo \(lB\-arg \(lBparm...\(rB\(rB \(lBhead...\(rB  
 \(lBbody...\(rB  
 \&.Yc  
 .Ed  
 .Pp  
 .Bl -column -compact -offset indent "MacroX" "CallableX" "ParsedX" "closed by XXX"  
 .It Em Macro Ta Em Callable Ta Em Parsed Ta Em Scope  
 .It Sx \&Bd  Ta    \&No     Ta    \&No     Ta    closed by Sx \&Ed  
 .It Sx \&Bf  Ta    \&No     Ta    \&No     Ta    closed by Sx \&Ef  
 .It Sx \&Bk  Ta    \&No     Ta    \&No     Ta    closed by Sx \&Ek  
 .It Sx \&Bl  Ta    \&No     Ta    \&No     Ta    closed by Sx \&El  
 .It Sx \&Ed  Ta    \&No     Ta    \&No     Ta    opened by Sx \&Bd  
 .It Sx \&Ef  Ta    \&No     Ta    \&No     Ta    opened by Sx \&Bf  
 .It Sx \&Ek  Ta    \&No     Ta    \&No     Ta    opened by Sx \&Bk  
 .It Sx \&El  Ta    \&No     Ta    \&No     Ta    opened by Sx \&Bl  
 .El  .El
 .Ss Block full-implicit  .Ss Sections and cross references
 Multi-line scope closed by end-of-file or implicitly by another macro.  .Bl -column "Brq, Bro, Brc" description
 All macros have bodies; some  .It Sx \&Sh Ta section header (one line)
 .Po  .It Sx \&Ss Ta subsection header (one line)
 .Sx \&It Fl bullet ,  .It Sx \&Sx Ta internal cross reference to a section or subsection
 .Fl hyphen ,  .It Sx \&Xr Ta cross reference to another manual page: Ar name section
 .Fl dash ,  .It Sx \&Pp , \&Lp Ta start a text paragraph (no arguments)
 .Fl enum ,  
 .Fl item  
 .Pc  
 don't have heads; only one  
 .Po  
 .Sx \&It  
 in  
 .Sx \&Bl Fl column  
 .Pc  
 has multiple heads.  
 .Bd -literal -offset indent  
 \&.Yo \(lB\-arg \(lBparm...\(rB\(rB \(lBhead... \(lBTa head...\(rB\(rB  
 \(lBbody...\(rB  
 .Ed  
 .Pp  
 .Bl -column -compact -offset indent "MacroX" "CallableX" "ParsedX" "closed by XXXXXXXXXXX"  
 .It Em Macro Ta Em Callable Ta Em Parsed Ta Em Scope  
 .It Sx \&It Ta \&No Ta Yes  Ta closed by Sx \&It , Sx \&El  
 .It Sx \&Nd Ta \&No Ta \&No Ta closed by Sx \&Sh  
 .It Sx \&Nm Ta \&No Ta Yes  Ta closed by Sx \&Nm , Sx \&Sh , Sx \&Ss  
 .It Sx \&Sh Ta \&No Ta Yes  Ta closed by Sx \&Sh  
 .It Sx \&Ss Ta \&No Ta Yes  Ta closed by Sx \&Sh , Sx \&Ss  
 .El  .El
 .Pp  .Ss Displays and lists
 Note that the  .Bl -column "Brq, Bro, Brc" description
 .Sx \&Nm  .It Sx \&Bd , \&Ed Ta display block:
 macro is a  .Fl Ar type
 .Sx Block full-implicit  .Op Fl offset Ar width
 macro only when invoked as the first macro  .Op Fl compact
 in a  .It Sx \&D1 Ta indented display (one line)
 .Em SYNOPSIS  .It Sx \&Dl Ta indented literal display (one line)
 section line, else it is  .It Sx \&Bl , \&El Ta list block:
 .Sx In-line .  .Fl Ar type
 .Ss Block partial-explicit  .Op Fl width Ar val
 Like block full-explicit, but also with single-line scope.  .Op Fl offset Ar val
 Each has at least a body and, in limited circumstances, a head  .Op Fl compact
 .Po  .It Sx \&It Ta list item (syntax depends on Fl Ar type )
 .Sx \&Fo ,  .It Sx \&Ta Ta table cell separator in Sx \&Bl Fl column No lists
 .Sx \&Eo  .It Sx \&Rs , \&%* , \&Re Ta bibliographic block (references)
 .Pc  
 and/or tail  
 .Pq Sx \&Ec .  
 .Bd -literal -offset indent  
 \&.Yo \(lB\-arg \(lBparm...\(rB\(rB \(lBhead...\(rB  
 \(lBbody...\(rB  
 \&.Yc \(lBtail...\(rB  
   
 \&.Yo \(lB\-arg \(lBparm...\(rB\(rB \(lBhead...\(rB \  
 \(lBbody...\(rB \&Yc \(lBtail...\(rB  
 .Ed  
 .Pp  
 .Bl -column "MacroX" "CallableX" "ParsedX" "closed by XXXX" -compact -offset indent  
 .It Em Macro Ta Em Callable Ta Em Parsed Ta Em Scope  
 .It Sx \&Ac  Ta    Yes      Ta    Yes      Ta    opened by Sx \&Ao  
 .It Sx \&Ao  Ta    Yes      Ta    Yes      Ta    closed by Sx \&Ac  
 .It Sx \&Bc  Ta    Yes      Ta    Yes      Ta    closed by Sx \&Bo  
 .It Sx \&Bo  Ta    Yes      Ta    Yes      Ta    opened by Sx \&Bc  
 .It Sx \&Brc Ta    Yes      Ta    Yes      Ta    opened by Sx \&Bro  
 .It Sx \&Bro Ta    Yes      Ta    Yes      Ta    closed by Sx \&Brc  
 .It Sx \&Dc  Ta    Yes      Ta    Yes      Ta    opened by Sx \&Do  
 .It Sx \&Do  Ta    Yes      Ta    Yes      Ta    closed by Sx \&Dc  
 .It Sx \&Ec  Ta    Yes      Ta    Yes      Ta    opened by Sx \&Eo  
 .It Sx \&Eo  Ta    Yes      Ta    Yes      Ta    closed by Sx \&Ec  
 .It Sx \&Fc  Ta    Yes      Ta    Yes      Ta    opened by Sx \&Fo  
 .It Sx \&Fo  Ta    \&No     Ta    \&No     Ta    closed by Sx \&Fc  
 .It Sx \&Oc  Ta    Yes      Ta    Yes      Ta    closed by Sx \&Oo  
 .It Sx \&Oo  Ta    Yes      Ta    Yes      Ta    opened by Sx \&Oc  
 .It Sx \&Pc  Ta    Yes      Ta    Yes      Ta    closed by Sx \&Po  
 .It Sx \&Po  Ta    Yes      Ta    Yes      Ta    opened by Sx \&Pc  
 .It Sx \&Qc  Ta    Yes      Ta    Yes      Ta    opened by Sx \&Oo  
 .It Sx \&Qo  Ta    Yes      Ta    Yes      Ta    closed by Sx \&Oc  
 .It Sx \&Re  Ta    \&No     Ta    \&No     Ta    opened by Sx \&Rs  
 .It Sx \&Rs  Ta    \&No     Ta    \&No     Ta    closed by Sx \&Re  
 .It Sx \&Sc  Ta    Yes      Ta    Yes      Ta    opened by Sx \&So  
 .It Sx \&So  Ta    Yes      Ta    Yes      Ta    closed by Sx \&Sc  
 .It Sx \&Xc  Ta    Yes      Ta    Yes      Ta    opened by Sx \&Xo  
 .It Sx \&Xo  Ta    Yes      Ta    Yes      Ta    closed by Sx \&Xc  
 .El  .El
 .Ss Block partial-implicit  .Ss Spacing control
 Like block full-implicit, but with single-line scope closed by the  .Bl -column "Brq, Bro, Brc" description
 end of the line.  .It Sx \&Pf Ta prefix, no following horizontal space (one argument)
 .Bd -literal -offset indent  .It Sx \&Ns Ta roman font, no preceding horizontal space (no arguments)
 \&.Yo \(lB\-arg \(lBval...\(rB\(rB \(lBbody...\(rB \(lBres...\(rB  .It Sx \&Ap Ta apostrophe without surrounding whitespace (no arguments)
 .Ed  .It Sx \&Sm Ta switch horizontal spacing mode: Op Cm on | off
 .Pp  .It Sx \&Bk , \&Ek Ta keep block: Fl words
 .Bl -column "MacroX" "CallableX" "ParsedX" -compact -offset indent  .It Sx \&br Ta force output line break in text mode (no arguments)
 .It Em Macro Ta Em Callable Ta Em Parsed  .It Sx \&sp Ta force vertical space: Op Ar height
 .It Sx \&Aq  Ta    Yes      Ta    Yes  
 .It Sx \&Bq  Ta    Yes      Ta    Yes  
 .It Sx \&Brq Ta    Yes      Ta    Yes  
 .It Sx \&D1  Ta    \&No     Ta    \&Yes  
 .It Sx \&Dl  Ta    \&No     Ta    Yes  
 .It Sx \&Dq  Ta    Yes      Ta    Yes  
 .It Sx \&Op  Ta    Yes      Ta    Yes  
 .It Sx \&Pq  Ta    Yes      Ta    Yes  
 .It Sx \&Ql  Ta    Yes      Ta    Yes  
 .It Sx \&Qq  Ta    Yes      Ta    Yes  
 .It Sx \&Sq  Ta    Yes      Ta    Yes  
 .It Sx \&Vt  Ta    Yes      Ta    Yes  
 .El  .El
 .Pp  .Ss Semantic markup for command line utilities:
 Note that the  .Bl -column "Brq, Bro, Brc" description
 .Sx \&Vt  .It Sx \&Nm Ta start a SYNOPSIS block with the name of a utility
 macro is a  .It Sx \&Fl Ta command line options (flags) (>=0 arguments)
 .Sx Block partial-implicit  .It Sx \&Cm Ta command modifier (>0 arguments)
 only when invoked as the first macro  .It Sx \&Ar Ta command arguments (>=0 arguments)
 in a  .It Sx \&Op , \&Oo , \&Oc Ta optional syntax elements (enclosure)
 .Em SYNOPSIS  .It Sx \&Ic Ta internal or interactive command (>0 arguments)
 section line, else it is  .It Sx \&Ev Ta environmental variable (>0 arguments)
 .Sx In-line .  .It Sx \&Pa Ta file system path (>=0 arguments)
 .Ss Special block macro  
 The  
 .Sx \&Ta  
 macro can only be used below  
 .Sx \&It  
 in  
 .Sx \&Bl Fl column  
 lists.  
 It delimits blocks representing table cells;  
 these blocks have bodies, but no heads.  
 .Pp  
 .Bl -column "MacroX" "CallableX" "ParsedX" "closed by XXXX" -compact -offset indent  
 .It Em Macro Ta Em Callable Ta Em Parsed Ta Em Scope  
 .It Sx \&Ta  Ta    Yes      Ta    Yes    Ta closed by Sx \&Ta , Sx \&It  
 .El  .El
 .Ss In-line  .Ss Semantic markup for function libraries:
 Closed by the end of the line, fixed argument lengths,  .Bl -column "Brq, Bro, Brc" description
 and/or subsequent macros.  .It Sx \&Lb Ta function library (one argument)
 In-line macros have only text children.  .It Sx \&In Ta include file (one argument)
 If a number (or inequality) of arguments is  .It Sx \&Fd Ta other preprocessor directive (>0 arguments)
 .Pq n ,  .It Sx \&Ft Ta function type (>0 arguments)
 then the macro accepts an arbitrary number of arguments.  .It Sx \&Fo , \&Fc Ta function block: Ar funcname
 .Bd -literal -offset indent  .It Sx \&Fn Ta function name:
 \&.Yo \(lB\-arg \(lBval...\(rB\(rB \(lBargs...\(rB \(lBres...\(rB  .Op Ar functype
   .Ar funcname
 \&.Yo \(lB\-arg \(lBval...\(rB\(rB \(lBargs...\(rB Yc...  .Oo
   .Op Ar argtype
 \&.Yo \(lB\-arg \(lBval...\(rB\(rB arg0 arg1 argN  .Ar argname
 .Ed  .Oc
 .Pp  .It Sx \&Fa Ta function argument (>0 arguments)
 .Bl -column "MacroX" "CallableX" "ParsedX" "Arguments" -compact -offset indent  .It Sx \&Vt Ta variable type (>0 arguments)
 .It Em Macro Ta Em Callable Ta Em Parsed Ta Em Arguments  .It Sx \&Va Ta variable name (>0 arguments)
 .It Sx \&%A  Ta    \&No     Ta    \&No     Ta    >0  .It Sx \&Dv Ta defined variable or preprocessor constant (>0 arguments)
 .It Sx \&%B  Ta    \&No     Ta    \&No     Ta    >0  .It Sx \&Er Ta error constant (>0 arguments)
 .It Sx \&%C  Ta    \&No     Ta    \&No     Ta    >0  .It Sx \&Ev Ta environmental variable (>0 arguments)
 .It Sx \&%D  Ta    \&No     Ta    \&No     Ta    >0  
 .It Sx \&%I  Ta    \&No     Ta    \&No     Ta    >0  
 .It Sx \&%J  Ta    \&No     Ta    \&No     Ta    >0  
 .It Sx \&%N  Ta    \&No     Ta    \&No     Ta    >0  
 .It Sx \&%O  Ta    \&No     Ta    \&No     Ta    >0  
 .It Sx \&%P  Ta    \&No     Ta    \&No     Ta    >0  
 .It Sx \&%Q  Ta    \&No     Ta    \&No     Ta    >0  
 .It Sx \&%R  Ta    \&No     Ta    \&No     Ta    >0  
 .It Sx \&%T  Ta    \&No     Ta    \&No     Ta    >0  
 .It Sx \&%U  Ta    \&No     Ta    \&No     Ta    >0  
 .It Sx \&%V  Ta    \&No     Ta    \&No     Ta    >0  
 .It Sx \&Ad  Ta    Yes      Ta    Yes      Ta    >0  
 .It Sx \&An  Ta    Yes      Ta    Yes      Ta    >0  
 .It Sx \&Ap  Ta    Yes      Ta    Yes      Ta    0  
 .It Sx \&Ar  Ta    Yes      Ta    Yes      Ta    n  
 .It Sx \&At  Ta    Yes      Ta    Yes      Ta    1  
 .It Sx \&Bsx Ta    Yes      Ta    Yes      Ta    n  
 .It Sx \&Bt  Ta    \&No     Ta    \&No     Ta    0  
 .It Sx \&Bx  Ta    Yes      Ta    Yes      Ta    n  
 .It Sx \&Cd  Ta    Yes      Ta    Yes      Ta    >0  
 .It Sx \&Cm  Ta    Yes      Ta    Yes      Ta    >0  
 .It Sx \&Db  Ta    \&No     Ta    \&No     Ta    1  
 .It Sx \&Dd  Ta    \&No     Ta    \&No     Ta    n  
 .It Sx \&Dt  Ta    \&No     Ta    \&No     Ta    n  
 .It Sx \&Dv  Ta    Yes      Ta    Yes      Ta    >0  
 .It Sx \&Dx  Ta    Yes      Ta    Yes      Ta    n  
 .It Sx \&Em  Ta    Yes      Ta    Yes      Ta    >0  
 .It Sx \&En  Ta    \&No     Ta    \&No     Ta    0  
 .It Sx \&Er  Ta    Yes      Ta    Yes      Ta    >0  
 .It Sx \&Es  Ta    \&No     Ta    \&No     Ta    0  
 .It Sx \&Ev  Ta    Yes      Ta    Yes      Ta    >0  
 .It Sx \&Ex  Ta    \&No     Ta    \&No     Ta    n  
 .It Sx \&Fa  Ta    Yes      Ta    Yes      Ta    >0  
 .It Sx \&Fd  Ta    \&No     Ta    \&No     Ta    >0  
 .It Sx \&Fl  Ta    Yes      Ta    Yes      Ta    n  
 .It Sx \&Fn  Ta    Yes      Ta    Yes      Ta    >0  
 .It Sx \&Fr  Ta    \&No     Ta    \&No     Ta    n  
 .It Sx \&Ft  Ta    Yes      Ta    Yes      Ta    >0  
 .It Sx \&Fx  Ta    Yes      Ta    Yes      Ta    n  
 .It Sx \&Hf  Ta    \&No     Ta    \&No     Ta    n  
 .It Sx \&Ic  Ta    Yes      Ta    Yes      Ta    >0  
 .It Sx \&In  Ta    \&No     Ta    \&No     Ta    1  
 .It Sx \&Lb  Ta    \&No     Ta    \&No     Ta    1  
 .It Sx \&Li  Ta    Yes      Ta    Yes      Ta    >0  
 .It Sx \&Lk  Ta    Yes      Ta    Yes      Ta    >0  
 .It Sx \&Lp  Ta    \&No     Ta    \&No     Ta    0  
 .It Sx \&Ms  Ta    Yes      Ta    Yes      Ta    >0  
 .It Sx \&Mt  Ta    Yes      Ta    Yes      Ta    >0  
 .It Sx \&Nm  Ta    Yes      Ta    Yes      Ta    n  
 .It Sx \&No  Ta    Yes      Ta    Yes      Ta    0  
 .It Sx \&Ns  Ta    Yes      Ta    Yes      Ta    0  
 .It Sx \&Nx  Ta    Yes      Ta    Yes      Ta    n  
 .It Sx \&Os  Ta    \&No     Ta    \&No     Ta    n  
 .It Sx \&Ot  Ta    \&No     Ta    \&No     Ta    n  
 .It Sx \&Ox  Ta    Yes      Ta    Yes      Ta    n  
 .It Sx \&Pa  Ta    Yes      Ta    Yes      Ta    n  
 .It Sx \&Pf  Ta    Yes      Ta    Yes      Ta    1  
 .It Sx \&Pp  Ta    \&No     Ta    \&No     Ta    0  
 .It Sx \&Rv  Ta    \&No     Ta    \&No     Ta    n  
 .It Sx \&Sm  Ta    \&No     Ta    \&No     Ta    1  
 .It Sx \&St  Ta    \&No     Ta    Yes      Ta    1  
 .It Sx \&Sx  Ta    Yes      Ta    Yes      Ta    >0  
 .It Sx \&Sy  Ta    Yes      Ta    Yes      Ta    >0  
 .It Sx \&Tn  Ta    Yes      Ta    Yes      Ta    >0  
 .It Sx \&Ud  Ta    \&No     Ta    \&No     Ta    0  
 .It Sx \&Ux  Ta    Yes      Ta    Yes      Ta    n  
 .It Sx \&Va  Ta    Yes      Ta    Yes      Ta    n  
 .It Sx \&Vt  Ta    Yes      Ta    Yes      Ta    >0  
 .It Sx \&Xr  Ta    Yes      Ta    Yes      Ta    >0  
 .It Sx \&br  Ta    \&No     Ta    \&No     Ta    0  
 .It Sx \&sp  Ta    \&No     Ta    \&No     Ta    1  
 .El  .El
 .Ss Delimiters  .Ss Various semantic markup:
 When a macro argument consists of one single input character  .Bl -column "Brq, Bro, Brc" description
 considered as a delimiter, the argument gets special handling.  .It Sx \&An Ta author name (>0 arguments)
 This does not apply when delimiters appear in arguments containing  .It Sx \&Lk Ta hyperlink: Ar uri Op Ar name
 more than one character.  .It Sx \&Mt Ta Do mailto Dc hyperlink: Ar address
 Consequently, to prevent special handling and just handle it  .It Sx \&Cd Ta kernel configuration declaration (>0 arguments)
 like any other argument, a delimiter can be escaped by prepending  .It Sx \&Ad Ta memory address (>0 arguments)
 a zero-width space  .It Sx \&Ms Ta mathematical symbol (>0 arguments)
 .Pq Sq \e& .  
 In text lines, delimiters never need escaping, but may be used  
 as normal punctuation.  
 .Pp  
 For many macros, when the leading arguments are opening delimiters,  
 these delimiters are put before the macro scope,  
 and when the trailing arguments are closing delimiters,  
 these delimiters are put after the macro scope.  
 For example,  
 .Pp  
 .D1 Pf \. \&Aq "( [ word ] ) ."  
 .Pp  
 renders as:  
 .Pp  
 .D1 Aq ( [ word ] ) .  
 .Pp  
 Opening delimiters are:  
 .Pp  
 .Bl -tag -width Ds -offset indent -compact  
 .It \&(  
 left parenthesis  
 .It \&[  
 left bracket  
 .El  .El
 .Pp  .Ss Physical markup
 Closing delimiters are:  .Bl -column "Brq, Bro, Brc" description
 .Pp  .It Sx \&Em Ta italic font or underline (emphasis) (>0 arguments)
 .Bl -tag -width Ds -offset indent -compact  .It Sx \&Sy Ta boldface font (symbolic) (>0 arguments)
 .It \&.  .It Sx \&Li Ta typewriter font (literal) (>0 arguments)
 period  .It Sx \&No Ta return to roman font (normal) (no arguments)
 .It \&,  .It Sx \&Bf , \&Ef Ta font block:
 comma  .Op Fl Ar type | Cm \&Em | \&Li | \&Sy
 .It \&:  
 colon  
 .It \&;  
 semicolon  
 .It \&)  
 right parenthesis  
 .It \&]  
 right bracket  
 .It \&?  
 question mark  
 .It \&!  
 exclamation mark  
 .El  .El
 .Pp  .Ss Physical enclosures
 Note that even a period preceded by a backslash  .Bl -column "Brq, Bro, Brc" description
 .Pq Sq \e.\&  .It Sx \&Dq , \&Do , \&Dc Ta enclose in typographic double quotes: Dq text
 gets this special handling; use  .It Sx \&Qq , \&Qo , \&Qc Ta enclose in typewriter double quotes: Qq text
 .Sq \e&.  .It Sx \&Sq , \&So , \&Sc Ta enclose in single quotes: Sq text
 to prevent that.  .It Sx \&Ql Ta single-quoted literal text: Ql text
 .Pp  .It Sx \&Pq , \&Po , \&Pc Ta enclose in parentheses: Pq text
 Many in-line macros interrupt their scope when they encounter  .It Sx \&Bq , \&Bo , \&Bc Ta enclose in square brackets: Bq text
 delimiters, and resume their scope when more arguments follow that  .It Sx \&Brq , \&Bro , \&Brc Ta enclose in curly braces: Brq text
 are not delimiters.  .It Sx \&Aq , \&Ao , \&Ac Ta enclose in angle brackets: Aq text
 For example,  .It Sx \&Eo , \&Ec Ta generic enclosure
 .Pp  
 .D1 Pf \. \&Fl "a ( b | c \e*(Ba d ) e"  
 .Pp  
 renders as:  
 .Pp  
 .D1 Fl a ( b | c \*(Ba d ) e  
 .Pp  
 This applies to both opening and closing delimiters,  
 and also to the middle delimiter:  
 .Pp  
 .Bl -tag -width Ds -offset indent -compact  
 .It \&|  
 vertical bar  
 .El  .El
 .Pp  .Ss Text production
 As a special case, the predefined string \e*(Ba is handled and rendered  .Bl -column "Brq, Bro, Brc" description
 in the same way as a plain  .It Sx \&Ex Fl std Ta standard command exit values: Op Ar utility ...
 .Sq \&|  .It Sx \&Rv Fl std Ta standard function return values: Op Ar function ...
 character.  .It Sx \&St Ta reference to a standards document (one argument)
 Using this predefined string is not recommended in new manuals.  .It Sx \&At Ta At
 .Sh REFERENCE  .It Sx \&Bx Ta Bx
   .It Sx \&Bsx Ta Bsx
   .It Sx \&Nx Ta Nx
   .It Sx \&Fx Ta Fx
   .It Sx \&Ox Ta Ox
   .It Sx \&Dx Ta Dx
   .El
   .Sh MACRO REFERENCE
 This section is a canonical reference of all macros, arranged  This section is a canonical reference of all macros, arranged
 alphabetically.  alphabetically.
 For the scoping of individual macros, see  For the scoping of individual macros, see
Line 1129  for all other author listings.
Line 667  for all other author listings.
 .Pp  .Pp
 Examples:  Examples:
 .Dl \&.An -nosplit  .Dl \&.An -nosplit
 .Dl \&.An Kristaps Dzonsons \&Aq kristaps@bsd.lv  .Dl \&.An Kristaps Dzonsons \&Aq \&Mt kristaps@bsd.lv
 .Ss \&Ao  .Ss \&Ao
 Begin a block enclosed by angle brackets.  Begin a block enclosed by angle brackets.
 Does not have any head arguments.  Does not have any head arguments.
Line 1183  for fixed strings to be passed verbatim as arguments, 
Line 721  for fixed strings to be passed verbatim as arguments, 
 or  or
 .Sx \&Cm .  .Sx \&Cm .
 .Ss \&At  .Ss \&At
 Formats an AT&T version.  Formats an
   .At
   version.
 Accepts one optional argument:  Accepts one optional argument:
 .Pp  .Pp
 .Bl -tag -width "v[1-7] | 32vX" -offset indent -compact  .Bl -tag -width "v[1-7] | 32vX" -offset indent -compact
Line 1210  See also
Line 750  See also
 .Sx \&Dx ,  .Sx \&Dx ,
 .Sx \&Fx ,  .Sx \&Fx ,
 .Sx \&Nx ,  .Sx \&Nx ,
 .Sx \&Ox ,  
 and  and
 .Sx \&Ux .  .Sx \&Ox .
 .Ss \&Bc  .Ss \&Bc
 Close a  Close a
 .Sx \&Bo  .Sx \&Bo
Line 1292  The most popular is the imaginary macro
Line 831  The most popular is the imaginary macro
 which resolves to  which resolves to
 .Sy 6n .  .Sy 6n .
 .It  .It
 A width using the syntax described in  A scaling width as described in
 .Sx Scaling Widths .  .Xr roff 7 .
 .It  .It
 An arbitrary string, which indents by the length of this string.  An arbitrary string, which indents by the length of this string.
 .El  .El
Line 1398  The
Line 937  The
 .Fl width  .Fl width
 and  and
 .Fl offset  .Fl offset
 arguments accept  arguments accept macro names as described for
 .Sx Scaling Widths  .Sx \&Bd
   .Fl offset ,
   scaling widths as described in
   .Xr roff 7 ,
 or use the length of the given string.  or use the length of the given string.
 The  The
 .Fl offset  .Fl offset
Line 1428  A columnated list.
Line 970  A columnated list.
 The  The
 .Fl width  .Fl width
 argument has no effect; instead, each argument specifies the width  argument has no effect; instead, each argument specifies the width
 of one column, using either the  of one column, using either the scaling width syntax described in
 .Sx Scaling Widths  .Xr roff 7
 syntax or the string length of the argument.  or the string length of the argument.
 If the first line of the body of a  If the first line of the body of a
 .Fl column  .Fl column
 list is not an  list is not an
Line 1561  Examples:
Line 1103  Examples:
 See also  See also
 .Sx \&Bro .  .Sx \&Bro .
 .Ss \&Bsx  .Ss \&Bsx
 Format the BSD/OS version provided as an argument, or a default value if  Format the
   .Bsx
   version provided as an argument, or a default value if
 no argument is provided.  no argument is provided.
 .Pp  .Pp
 Examples:  Examples:
Line 1574  See also
Line 1118  See also
 .Sx \&Dx ,  .Sx \&Dx ,
 .Sx \&Fx ,  .Sx \&Fx ,
 .Sx \&Nx ,  .Sx \&Nx ,
 .Sx \&Ox ,  
 and  and
 .Sx \&Ux .  .Sx \&Ox .
 .Ss \&Bt  .Ss \&Bt
   Supported only for compatibility, do not use this in new manuals.
 Prints  Prints
 .Dq is currently in beta test.  .Dq is currently in beta test.
 .Ss \&Bx  .Ss \&Bx
 Format the BSD version provided as an argument, or a default value if no  Format the
   .Bx
   version provided as an argument, or a default value if no
 argument is provided.  argument is provided.
 .Pp  .Pp
 Examples:  Examples:
Line 1595  See also
Line 1141  See also
 .Sx \&Dx ,  .Sx \&Dx ,
 .Sx \&Fx ,  .Sx \&Fx ,
 .Sx \&Nx ,  .Sx \&Nx ,
 .Sx \&Ox ,  
 and  and
 .Sx \&Ux .  .Sx \&Ox .
 .Ss \&Cd  .Ss \&Cd
 Kernel configuration declaration.  Kernel configuration declaration.
 This denotes strings accepted by  This denotes strings accepted by
Line 1640  See also
Line 1185  See also
 and  and
 .Sx \&Dl .  .Sx \&Dl .
 .Ss \&Db  .Ss \&Db
 Switch debugging mode.  This macro is obsolete.
 Its syntax is as follows:  No replacement is needed.
 .Pp  It is ignored by
 .D1 Pf \. Sx \&Db Cm on | off  .Xr mandoc 1
 .Pp  and groff including its arguments.
 This macro is ignored by  It was formerly used to toggle a debugging mode.
 .Xr mandoc 1 .  
 .Ss \&Dc  .Ss \&Dc
 Close a  Close a
 .Sx \&Do  .Sx \&Do
 block.  block.
 Does not have any tail arguments.  Does not have any tail arguments.
 .Ss \&Dd  .Ss \&Dd
 Document date.  Document date for display in the page footer.
 This is the mandatory first macro of any  This is the mandatory first macro of any
 .Nm  .Nm
 manual.  manual.
Line 1682  the special string
Line 1226  the special string
 .Dq $\&Mdocdate$  .Dq $\&Mdocdate$
 can be given as an argument.  can be given as an argument.
 .It  .It
 A few alternative date formats are accepted as well  The traditional, purely numeric
 and converted to the standard form.  .Xr man 7
   format
   .Ar year Ns \(en Ns Ar month Ns \(en Ns Ar day
   is accepted, too.
 .It  .It
 If a date string cannot be parsed, it is used verbatim.  If a date string cannot be parsed, it is used verbatim.
 .It  .It
Line 1700  See also
Line 1247  See also
 and  and
 .Sx \&Os .  .Sx \&Os .
 .Ss \&Dl  .Ss \&Dl
 One-line intended display.  One-line indented display.
 This is formatted as literal text and is useful for commands and  This is formatted as literal text and is useful for commands and
 invocations.  invocations.
 It is followed by a newline.  It is followed by a newline.
Line 1743  See also
Line 1290  See also
 and  and
 .Sx \&Do .  .Sx \&Do .
 .Ss \&Dt  .Ss \&Dt
 Document title.  Document title for display in the page header.
 This is the mandatory second macro of any  This is the mandatory second macro of any
 .Nm  .Nm
 file.  file.
 Its syntax is as follows:  Its syntax is as follows:
 .Bd -ragged -offset indent  .Bd -ragged -offset indent
 .Pf \. Sx \&Dt  .Pf \. Sx \&Dt
 .Oo  .Ar TITLE
 .Ar title  
 .Oo  
 .Ar section  .Ar section
 .Op Ar volume | arch  .Op Ar volume | arch
 .Oc  
 .Oc  
 .Ed  .Ed
 .Pp  .Pp
 Its arguments are as follows:  Its arguments are as follows:
 .Bl -tag -width Ds -offset Ds  .Bl -tag -width section -offset 2n
 .It Ar title  .It Ar TITLE
 The document's title (name), defaulting to  The document's title (name), defaulting to
 .Dq UNKNOWN  .Dq UNTITLED
 if unspecified.  if unspecified.
 It should be capitalised.  To achieve a uniform appearance of page header lines,
   it should by convention be all caps.
 .It Ar section  .It Ar section
 The manual section.  The manual section.
 This may be one of  This may be one of
 .Ar 1  .Cm 1
 .Pq utilities ,  .Pq utilities ,
 .Ar 2  .Cm 2
 .Pq system calls ,  .Pq system calls ,
 .Ar 3  .Cm 3
 .Pq libraries ,  .Pq libraries ,
 .Ar 3p  .Cm 3p
 .Pq Perl libraries ,  .Pq Perl libraries ,
 .Ar 4  .Cm 4
 .Pq devices ,  .Pq devices ,
 .Ar 5  .Cm 5
 .Pq file formats ,  .Pq file formats ,
 .Ar 6  .Cm 6
 .Pq games ,  .Pq games ,
 .Ar 7  .Cm 7
 .Pq miscellaneous ,  .Pq miscellaneous ,
 .Ar 8  .Cm 8
 .Pq system utilities ,  .Pq system utilities ,
 .Ar 9  .Cm 9
 .Pq kernel functions ,  .Pq kernel functions ,
 .Ar X11  .Cm X11
 .Pq X Window System ,  .Pq X Window System ,
 .Ar X11R6  .Cm X11R6
 .Pq X Window System ,  .Pq X Window System ,
 .Ar unass  .Cm unass
 .Pq unassociated ,  .Pq unassociated ,
 .Ar local  .Cm local
 .Pq local system ,  .Pq local system ,
 .Ar draft  .Cm draft
 .Pq draft manual ,  .Pq draft manual ,
 or  or
 .Ar paper  .Cm paper
 .Pq paper .  .Pq paper .
 It should correspond to the manual's filename suffix and defaults to  It should correspond to the manual's filename suffix and defaults to
 .Dq 1  the empty string if unspecified.
 if unspecified.  
 .It Ar volume  .It Ar volume
 This overrides the volume inferred from  This overrides the volume inferred from
 .Ar section .  .Ar section .
 This field is optional, and if specified, must be one of  This field is optional, and if specified, must be one of
 .Ar USD  .Cm USD
 .Pq users' supplementary documents ,  .Pq users' supplementary documents ,
 .Ar PS1  .Cm PS1
 .Pq programmers' supplementary documents ,  .Pq programmers' supplementary documents ,
 .Ar AMD  .Cm AMD
 .Pq administrators' supplementary documents ,  .Pq administrators' supplementary documents ,
 .Ar SMM  .Cm SMM
 .Pq system managers' manuals ,  .Pq system managers' manuals ,
 .Ar URM  .Cm URM
 .Pq users' reference manuals ,  .Pq users' reference manuals ,
 .Ar PRM  .Cm PRM
 .Pq programmers' reference manuals ,  .Pq programmers' reference manuals ,
 .Ar KM  .Cm KM
 .Pq kernel manuals ,  .Pq kernel manuals ,
 .Ar IND  .Cm IND
 .Pq master index ,  .Pq master index ,
 .Ar MMI  .Cm MMI
 .Pq master index ,  .Pq master index ,
 .Ar LOCAL  .Cm LOCAL
 .Pq local manuals ,  .Pq local manuals ,
 .Ar LOC  .Cm LOC
 .Pq local manuals ,  .Pq local manuals ,
 or  or
 .Ar CON  .Cm CON
 .Pq contributed manuals .  .Pq contributed manuals .
 .It Ar arch  .It Ar arch
 This specifies a specific relevant architecture.  This specifies the machine architecture a manual page applies to,
 If  where relevant, for example
 .Ar volume  .Cm alpha ,
 is not provided, it may be used in its place, else it may be used  .Cm amd64 ,
 subsequent that.  .Cm i386 ,
 It, too, is optional.  
 It must be one of  
 .Ar alpha ,  
 .Ar amd64 ,  
 .Ar amiga ,  
 .Ar arc ,  
 .Ar arm ,  
 .Ar armish ,  
 .Ar aviion ,  
 .Ar hp300 ,  
 .Ar hppa ,  
 .Ar hppa64 ,  
 .Ar i386 ,  
 .Ar landisk ,  
 .Ar loongson ,  
 .Ar luna88k ,  
 .Ar mac68k ,  
 .Ar macppc ,  
 .Ar mips64 ,  
 .Ar mvme68k ,  
 .Ar mvme88k ,  
 .Ar mvmeppc ,  
 .Ar pmax ,  
 .Ar sgi ,  
 .Ar socppc ,  
 .Ar sparc ,  
 .Ar sparc64 ,  
 .Ar sun3 ,  
 .Ar vax ,  
 or  or
 .Ar zaurus .  .Cm sparc64 .
   The list of valid architectures varies by operating system.
 .El  .El
 .Pp  .Pp
 Examples:  Examples:
Line 1895  See also
Line 1410  See also
 .Sx \&Er  .Sx \&Er
 and  and
 .Sx \&Ev  .Sx \&Ev
 for special-purpose constants and  for special-purpose constants,
 .Sx \&Va  .Sx \&Va
 for variable symbols.  for variable symbols, and
   .Sx \&Fd
   for listing preprocessor variable definitions in the
   .Em SYNOPSIS .
 .Ss \&Dx  .Ss \&Dx
 Format the DragonFly BSD version provided as an argument, or a default  Format the
   .Dx
   version provided as an argument, or a default
 value if no argument is provided.  value if no argument is provided.
 .Pp  .Pp
 Examples:  Examples:
Line 1912  See also
Line 1432  See also
 .Sx \&Bx ,  .Sx \&Bx ,
 .Sx \&Fx ,  .Sx \&Fx ,
 .Sx \&Nx ,  .Sx \&Nx ,
 .Sx \&Ox ,  
 and  and
 .Sx \&Ux .  .Sx \&Ox .
 .Ss \&Ec  .Ss \&Ec
 Close a scope started by  Close a scope started by
 .Sx \&Eo .  .Sx \&Eo .
Line 1945  See also
Line 1464  See also
 and  and
 .Sx \&It .  .Sx \&It .
 .Ss \&Em  .Ss \&Em
 Denotes text that should be  Request an italic font.
 .Em emphasised .  If the output device does not provide that, underline.
 Note that this is a presentation term and should not be used for  
 stylistically decorating technical terms.  
 Depending on the output device, this is usually represented  
 using an italic font or underlined characters.  
 .Pp  .Pp
   This is most often used for stress emphasis (not to be confused with
   importance, see
   .Sx \&Sy ) .
   In the rare cases where none of the semantic markup macros fit,
   it can also be used for technical terms and placeholders, except
   that for syntax elements,
   .Sx \&Sy
   and
   .Sx \&Ar
   are preferred, respectively.
   .Pp
 Examples:  Examples:
 .Dl \&.Em Warnings!  .Bd -literal -compact -offset indent
 .Dl \&.Em Remarks :  Selected lines are those
   \&.Em not
   matching any of the specified patterns.
   Some of the functions use a
   \&.Em hold space
   to save the pattern space for subsequent retrieval.
   .Ed
 .Pp  .Pp
 See also  See also
 .Sx \&Bf ,  .Sx \&Bf ,
Line 1963  See also
Line 1495  See also
 and  and
 .Sx \&Sy .  .Sx \&Sy .
 .Ss \&En  .Ss \&En
 This macro is obsolete and not implemented in  This macro is obsolete.
 .Xr mandoc 1 .  Use
   .Sx \&Eo
   or any of the other enclosure macros.
   .Pp
   It encloses its argument in the delimiters specified by the last
   .Sx \&Es
   macro.
 .Ss \&Eo  .Ss \&Eo
 An arbitrary enclosure.  An arbitrary enclosure.
 Its syntax is as follows:  Its syntax is as follows:
Line 1990  See also
Line 1528  See also
 .Sx \&Dv  .Sx \&Dv
 for general constants.  for general constants.
 .Ss \&Es  .Ss \&Es
 This macro is obsolete and not implemented.  This macro is obsolete.
   Use
   .Sx \&Eo
   or any of the other enclosure macros.
   .Pp
   It takes two arguments, defining the delimiters to be used by subsequent
   .Sx \&En
   macros.
 .Ss \&Ev  .Ss \&Ev
 Environmental variables such as those specified in  Environmental variables such as those specified in
 .Xr environ 7 .  .Xr environ 7 .
Line 2022  arguments are treated as separate utilities.
Line 1567  arguments are treated as separate utilities.
 See also  See also
 .Sx \&Rv .  .Sx \&Rv .
 .Ss \&Fa  .Ss \&Fa
 Function argument.  Function argument or parameter.
 Its syntax is as follows:  Its syntax is as follows:
 .Bd -ragged -offset indent  .Bd -ragged -offset indent
 .Pf \. Sx \&Fa  .Pf \. Sx \&Fa
 .Op Cm argtype  .Qo
 .Cm argname  .Op Ar argtype
   .Op Ar argname
   .Qc Ar \&...
 .Ed  .Ed
 .Pp  .Pp
 This may be invoked for names with or without the corresponding type.  Each argument may be a name and a type (recommended for the
 It is also used to specify the field name of a structure.  .Em SYNOPSIS
   section), a name alone (for function invocations),
   or a type alone (for function prototypes).
   If both a type and a name are given or if the type consists of multiple
   words, all words belonging to the same function argument have to be
   given in a single argument to the
   .Sx \&Fa
   macro.
   .Pp
   This macro is also used to specify the field name of a structure.
   .Pp
 Most often, the  Most often, the
 .Sx \&Fa  .Sx \&Fa
 macro is used in the  macro is used in the
 .Em SYNOPSIS  .Em SYNOPSIS
 within  within
 .Sx \&Fo  .Sx \&Fo
 section when documenting multi-line function prototypes.  blocks when documenting multi-line function prototypes.
 If invoked with multiple arguments, the arguments are separated by a  If invoked with multiple arguments, the arguments are separated by a
 comma.  comma.
 Furthermore, if the following macro is another  Furthermore, if the following macro is another
Line 2048  the last argument will also have a trailing comma.
Line 1605  the last argument will also have a trailing comma.
 Examples:  Examples:
 .Dl \&.Fa \(dqconst char *p\(dq  .Dl \&.Fa \(dqconst char *p\(dq
 .Dl \&.Fa \(dqint a\(dq \(dqint b\(dq \(dqint c\(dq  .Dl \&.Fa \(dqint a\(dq \(dqint b\(dq \(dqint c\(dq
 .Dl \&.Fa foo  .Dl \&.Fa \(dqchar *\(dq size_t
 .Pp  .Pp
 See also  See also
 .Sx \&Fo .  .Sx \&Fo .
Line 2056  See also
Line 1613  See also
 End a function context started by  End a function context started by
 .Sx \&Fo .  .Sx \&Fo .
 .Ss \&Fd  .Ss \&Fd
 Historically used to document include files.  Preprocessor directive, in particular for listing it in the
 This usage has been deprecated in favour of  .Em SYNOPSIS .
   Historically, it was also used to document include files.
   The latter usage has been deprecated in favour of
 .Sx \&In .  .Sx \&In .
 Do not use this macro.  
 .Pp  .Pp
   Its syntax is as follows:
   .Bd -ragged -offset indent
   .Pf \. Sx \&Fd
   .Li # Ns Ar directive
   .Op Ar argument ...
   .Ed
   .Pp
   Examples:
   .Dl \&.Fd #define sa_handler __sigaction_u.__sa_handler
   .Dl \&.Fd #define SIO_MAXNFDS
   .Dl \&.Fd #ifdef FS_DEBUG
   .Dl \&.Ft void
   .Dl \&.Fn dbg_open \(dqconst char *\(dq
   .Dl \&.Fd #endif
   .Pp
 See also  See also
 .Sx MANUAL STRUCTURE  .Sx MANUAL STRUCTURE ,
   .Sx \&In ,
 and  and
 .Sx \&In .  .Sx \&Dv .
 .Ss \&Fl  .Ss \&Fl
 Command-line flag or option.  Command-line flag or option.
 Used when listing arguments to command-line utilities.  Used when listing arguments to command-line utilities.
Line 2103  section, this macro starts a new output line,
Line 1677  section, this macro starts a new output line,
 and a blank line is automatically inserted between function definitions.  and a blank line is automatically inserted between function definitions.
 .Pp  .Pp
 Examples:  Examples:
 .Dl \&.Fn \*qint funcname\*q \*qint arg0\*q \*qint arg1\*q  .Dl \&.Fn \(dqint funcname\(dq \(dqint arg0\(dq \(dqint arg1\(dq
 .Dl \&.Fn funcname \*qint arg0\*q  .Dl \&.Fn funcname \(dqint arg0\(dq
 .Dl \&.Fn funcname arg0  .Dl \&.Fn funcname arg0
 .Pp  .Pp
 .Bd -literal -offset indent -compact  .Bd -literal -offset indent -compact
Line 2134  Invocations usually occur in the following context:
Line 1708  Invocations usually occur in the following context:
 .br  .br
 .Pf \. Sx \&Fo Ar funcname  .Pf \. Sx \&Fo Ar funcname
 .br  .br
 .Pf \. Sx \&Fa Oo Ar argtype Oc Ar argname  .Pf \. Sx \&Fa Qq Ar argtype Ar argname
 .br  .br
 \&.\.\.  \&.\.\.
 .br  .br
Line 2153  See also
Line 1727  See also
 and  and
 .Sx \&Ft .  .Sx \&Ft .
 .Ss \&Fr  .Ss \&Fr
 This macro is obsolete and not implemented in  This macro is obsolete.
 .Xr mandoc 1 .  No replacement markup is needed.
 .Pp  .Pp
 It was used to show function return values.  It was used to show numerical function return values in an italic font.
 The syntax was:  
 .Pp  
 .Dl Pf . Sx \&Fr Ar value  
 .Ss \&Ft  .Ss \&Ft
 A function type.  A function type.
 Its syntax is as follows:  Its syntax is as follows:
Line 2198  See also
Line 1769  See also
 .Sx \&Bx ,  .Sx \&Bx ,
 .Sx \&Dx ,  .Sx \&Dx ,
 .Sx \&Nx ,  .Sx \&Nx ,
 .Sx \&Ox ,  
 and  and
 .Sx \&Ux .  .Sx \&Ox .
 .Ss \&Hf  .Ss \&Hf
 This macro is not implemented in  This macro is not implemented in
 .Xr mandoc 1 .  .Xr mandoc 1 .
Line 2309  line itself; on following lines, only the
Line 1879  line itself; on following lines, only the
 .Sx \&Ta  .Sx \&Ta
 macro can be used to delimit cells, and  macro can be used to delimit cells, and
 .Sx \&Ta  .Sx \&Ta
 is only recognized as a macro when called by other macros,  is only recognised as a macro when called by other macros,
 not as the first macro on a line.  not as the first macro on a line.
 .Pp  .Pp
 Note that quoted strings may span tab-delimited cells on an  Note that quoted strings may span tab-delimited cells on an
Line 2345  section as described in
Line 1915  section as described in
 .Pp  .Pp
 Examples:  Examples:
 .Dl \&.Lb libz  .Dl \&.Lb libz
 .Dl \&.Lb mdoc  .Dl \&.Lb libmandoc
 .Ss \&Li  .Ss \&Li
 Denotes text that should be in a  Denotes text that should be in a
 .Li literal  .Li literal
Line 2369  Its syntax is as follows:
Line 1939  Its syntax is as follows:
 .D1 Pf \. Sx \&Lk Ar uri Op Ar name  .D1 Pf \. Sx \&Lk Ar uri Op Ar name
 .Pp  .Pp
 Examples:  Examples:
 .Dl \&.Lk http://bsd.lv \*qThe BSD.lv Project\*q  .Dl \&.Lk http://bsd.lv \(dqThe BSD.lv Project\(dq
 .Dl \&.Lk http://bsd.lv  .Dl \&.Lk http://bsd.lv
 .Pp  .Pp
 See also  See also
Line 2396  Its syntax is as follows:
Line 1966  Its syntax is as follows:
 .Pp  .Pp
 Examples:  Examples:
 .Dl \&.Mt discuss@manpages.bsd.lv  .Dl \&.Mt discuss@manpages.bsd.lv
   .Dl \&.An Kristaps Dzonsons \&Aq \&Mt kristaps@bsd.lv
 .Ss \&Nd  .Ss \&Nd
 A one line description of the manual's content.  A one line description of the manual's content.
 This may only be invoked in the  This may only be invoked in the
Line 2517  See also
Line 2088  See also
 .Sx \&Bx ,  .Sx \&Bx ,
 .Sx \&Dx ,  .Sx \&Dx ,
 .Sx \&Fx ,  .Sx \&Fx ,
 .Sx \&Ox ,  
 and  and
 .Sx \&Ux .  .Sx \&Ox .
 .Ss \&Oc  .Ss \&Oc
 Close multi-line  Close multi-line
 .Sx \&Oo  .Sx \&Oo
Line 2548  Examples:
Line 2118  Examples:
 See also  See also
 .Sx \&Oo .  .Sx \&Oo .
 .Ss \&Os  .Ss \&Os
 Document operating system version.  Operating system version for display in the page footer.
 This is the mandatory third macro of  This is the mandatory third macro of
 any  any
 .Nm  .Nm
Line 2573  See also
Line 2143  See also
 and  and
 .Sx \&Dt .  .Sx \&Dt .
 .Ss \&Ot  .Ss \&Ot
 This macro is obsolete and not implemented in  This macro is obsolete.
 .Xr mandoc 1 .  Use
   .Sx \&Ft
   instead; with
   .Xr mandoc 1 ,
   both have the same effect.
 .Pp  .Pp
 Historical  Historical
 .Xr mdoc 7  .Nm
 packages described it as  packages described it as
 .Dq "old function type (FORTRAN)" .  .Dq "old function type (FORTRAN)" .
 .Ss \&Ox  .Ss \&Ox
Line 2596  See also
Line 2170  See also
 .Sx \&Bx ,  .Sx \&Bx ,
 .Sx \&Dx ,  .Sx \&Dx ,
 .Sx \&Fx ,  .Sx \&Fx ,
 .Sx \&Nx ,  
 and  and
 .Sx \&Ux .  .Sx \&Nx .
 .Ss \&Pa  .Ss \&Pa
 An absolute or relative file system path, or a file or directory name.  An absolute or relative file system path, or a file or directory name.
 If an argument is not provided, the character  If an argument is not provided, the character
Line 2772  and
Line 2345  and
 Switches the spacing mode for output generated from macros.  Switches the spacing mode for output generated from macros.
 Its syntax is as follows:  Its syntax is as follows:
 .Pp  .Pp
 .D1 Pf \. Sx \&Sm Cm on | off  .D1 Pf \. Sx \&Sm Op Cm on | off
 .Pp  .Pp
 By default, spacing is  By default, spacing is
 .Cm on .  .Cm on .
Line 2781  When switched
Line 2354  When switched
 no white space is inserted between macro arguments and between the  no white space is inserted between macro arguments and between the
 output generated from adjacent macros, but text lines  output generated from adjacent macros, but text lines
 still get normal spacing between words and sentences.  still get normal spacing between words and sentences.
   .Pp
   When called without an argument, the
   .Sx \&Sm
   macro toggles the spacing mode.
   Using this is not recommended because it makes the code harder to read.
 .Ss \&So  .Ss \&So
 Multi-line version of  Multi-line version of
 .Sx \&Sq .  .Sx \&Sq .
Line 2818  and
Line 2396  and
 .Sx \&Sx .  .Sx \&Sx .
 .Ss \&St  .Ss \&St
 Replace an abbreviation for a standard with the full form.  Replace an abbreviation for a standard with the full form.
 The following standards are recognised:  The following standards are recognised.
   Where multiple lines are given without a blank line in between,
   they all refer to the same standard, and using the first form
   is recommended.
   .Bl -tag -width 1n
   .It C language standards
 .Pp  .Pp
 .Bl -tag -width "-p1003.1g-2000X" -compact  .Bl -tag -width "-p1003.1g-2000" -compact
 .It \-p1003.1-88  .It \-ansiC
 .St -p1003.1-88  .St -ansiC
 .It \-p1003.1-90  .It \-ansiC-89
 .St -p1003.1-90  .St -ansiC-89
 .It \-p1003.1-96  
 .St -p1003.1-96  
 .It \-p1003.1-2001  
 .St -p1003.1-2001  
 .It \-p1003.1-2004  
 .St -p1003.1-2004  
 .It \-p1003.1-2008  
 .St -p1003.1-2008  
 .It \-p1003.1  
 .St -p1003.1  
 .It \-p1003.1b  
 .St -p1003.1b  
 .It \-p1003.1b-93  
 .St -p1003.1b-93  
 .It \-p1003.1c-95  
 .St -p1003.1c-95  
 .It \-p1003.1g-2000  
 .St -p1003.1g-2000  
 .It \-p1003.1i-95  
 .St -p1003.1i-95  
 .It \-p1003.2-92  
 .St -p1003.2-92  
 .It \-p1003.2a-92  
 .St -p1003.2a-92  
 .It \-p1387.2-95  
 .St -p1387.2-95  
 .It \-p1003.2  
 .St -p1003.2  
 .It \-p1387.2  
 .St -p1387.2  
 .It \-isoC  .It \-isoC
 .St -isoC  .St -isoC
 .It \-isoC-90  .It \-isoC-90
 .St -isoC-90  .St -isoC-90
   .br
   The original C standard.
   .Pp
 .It \-isoC-amd1  .It \-isoC-amd1
 .St -isoC-amd1  .St -isoC-amd1
   .Pp
 .It \-isoC-tcor1  .It \-isoC-tcor1
 .St -isoC-tcor1  .St -isoC-tcor1
   .Pp
 .It \-isoC-tcor2  .It \-isoC-tcor2
 .St -isoC-tcor2  .St -isoC-tcor2
   .Pp
 .It \-isoC-99  .It \-isoC-99
 .St -isoC-99  .St -isoC-99
   .It \-ansiC-99
   .St -ansiC-99
   .br
   The second major version of the C language standard.
   .Pp
   .It \-isoC-2011
   .St -isoC-2011
   .br
   The third major version of the C language standard.
   .El
   .It POSIX.1 before the Single UNIX Specification
   .Pp
   .Bl -tag -width "-p1003.1g-2000" -compact
   .It \-p1003.1-88
   .St -p1003.1-88
   .It \-p1003.1
   .St -p1003.1
   .br
   The original POSIX standard, based on ANSI C.
   .Pp
   .It \-p1003.1-90
   .St -p1003.1-90
 .It \-iso9945-1-90  .It \-iso9945-1-90
 .St -iso9945-1-90  .St -iso9945-1-90
   .br
   The first update of POSIX.1.
   .Pp
   .It \-p1003.1b-93
   .St -p1003.1b-93
   .It \-p1003.1b
   .St -p1003.1b
   .br
   Real-time extensions.
   .Pp
   .It \-p1003.1c-95
   .St -p1003.1c-95
   .br
   POSIX thread interfaces.
   .Pp
   .It \-p1003.1i-95
   .St -p1003.1i-95
   .br
   Technical Corrigendum.
   .Pp
   .It \-p1003.1-96
   .St -p1003.1-96
 .It \-iso9945-1-96  .It \-iso9945-1-96
 .St -iso9945-1-96  .St -iso9945-1-96
 .It \-iso9945-2-93  .br
 .St -iso9945-2-93  Includes POSIX.1-1990, 1b, 1c, and 1i.
 .It \-ansiC  .El
 .St -ansiC  .It X/Open Portability Guide version 4 and related standards
 .It \-ansiC-89  .Pp
 .St -ansiC-89  .Bl -tag -width "-p1003.1g-2000" -compact
 .It \-ansiC-99  
 .St -ansiC-99  
 .It \-ieee754  
 .St -ieee754  
 .It \-iso8802-3  
 .St -iso8802-3  
 .It \-ieee1275-94  
 .St -ieee1275-94  
 .It \-xpg3  .It \-xpg3
 .St -xpg3  .St -xpg3
   .br
   An XPG4 precursor, published in 1989.
   .Pp
   .It \-p1003.2
   .St -p1003.2
   .It \-p1003.2-92
   .St -p1003.2-92
   .It \-iso9945-2-93
   .St -iso9945-2-93
   .br
   An XCU4 precursor.
   .Pp
   .It \-p1003.2a-92
   .St -p1003.2a-92
   .br
   Updates to POSIX.2.
   .Pp
 .It \-xpg4  .It \-xpg4
 .St -xpg4  .St -xpg4
   .br
   Based on POSIX.1 and POSIX.2, published in 1992.
   .El
   .It Single UNIX Specification version 1 and related standards
   .Pp
   .Bl -tag -width "-p1003.1g-2000" -compact
   .It \-susv1
   .St -susv1
 .It \-xpg4.2  .It \-xpg4.2
 .St -xpg4.2  .St -xpg4.2
   .br
   This standard was published in 1994.
   It was used as the basis for UNIX 95 certification.
   The following three refer to parts of it.
   .Pp
   .It \-xsh4.2
   .St -xsh4.2
   .Pp
   .It \-xcurses4.2
   .St -xcurses4.2
   .Pp
   .It \-p1003.1g-2000
   .St -p1003.1g-2000
   .br
   Networking APIs, including sockets.
   .Pp
 .It \-xpg4.3  .It \-xpg4.3
 .St -xpg4.3  .St -xpg4.3
   .Pp
   .It \-svid4
   .St -svid4 ,
   .br
   Published in 1995.
   .El
   .It Single UNIX Specification version 2 and related standards
   .Pp
   .Bl -tag -width "-p1003.1g-2000" -compact
   .It \-susv2
   .St -susv2
   This Standard was published in 1997
   and is also called X/Open Portability Guide version 5.
   It was used as the basis for UNIX 98 certification.
   The following refer to parts of it.
   .Pp
 .It \-xbd5  .It \-xbd5
 .St -xbd5  .St -xbd5
 .It \-xcu5  .Pp
 .St -xcu5  
 .It \-xsh5  .It \-xsh5
 .St -xsh5  .St -xsh5
   .Pp
   .It \-xcu5
   .St -xcu5
   .Pp
 .It \-xns5  .It \-xns5
 .St -xns5  .St -xns5
 .It \-xns5.2  .It \-xns5.2
 .St -xns5.2  .St -xns5.2
 .It \-xns5.2d2.0  .El
 .St -xns5.2d2.0  .It Single UNIX Specification version 3 and related standards
 .It \-xcurses4.2  .Pp
 .St -xcurses4.2  .Bl -tag -width "-p1003.1g-2000X" -compact
 .It \-susv2  .It \-p1003.1d-99
 .St -susv2  .St -p1003.1d-99
   .br
   Additional real-time extensions.
   .Pp
   .It \-p1003.1-2001
   .St -p1003.1-2001
 .It \-susv3  .It \-susv3
 .St -susv3  .St -susv3
 .It \-svid4  .br
 .St -svid4  This standard is based on C99, SUSv2, POSIX.1-1996, 1d, and 1j.
   It is also called X/Open Portability Guide version 6.
   It is used as the basis for UNIX 03 certification.
   .Pp
   .It \-p1003.1-2004
   .St -p1003.1-2004
   .br
   The second and last Technical Corrigendum.
 .El  .El
   .It Single UNIX Specification version 4
   .Pp
   .Bl -tag -width "-p1003.1g-2000" -compact
   .It \-p1003.1-2008
   .St -p1003.1-2008
   .It \-susv4
   .St -susv4
   .br
   This standard is also called
   X/Open Portability Guide version 7.
   .Pp
   .It \-p1003.1-2013
   .St -p1003.1-2013
   .br
   This is the first Technical Corrigendum.
   .El
   .It Other standards
   .Pp
   .Bl -tag -width "-p1003.1g-2000" -compact
   .It \-ieee754
   .St -ieee754
   .br
   Floating-point arithmetic.
   .Pp
   .It \-iso8601
   .St -iso8601
   .br
   Representation of dates and times, published in 1988.
   .Pp
   .It \-iso8802-3
   .St -iso8802-3
   .br
   Ethernet local area networks.
   .Pp
   .It \-ieee1275-94
   .St -ieee1275-94
   .El
   .El
 .Ss \&Sx  .Ss \&Sx
 Reference a section or subsection in the same manual page.  Reference a section or subsection in the same manual page.
 The referenced section or subsection name must be identical to the  The referenced section or subsection name must be identical to the
Line 2927  See also
Line 2632  See also
 and  and
 .Sx \&Ss .  .Sx \&Ss .
 .Ss \&Sy  .Ss \&Sy
 Format enclosed arguments in symbolic  Request a boldface font.
 .Pq Dq boldface .  
 Note that this is a presentation term and should not be used for  
 stylistically decorating technical terms.  
 .Pp  .Pp
   This is most often used to indicate importance or seriousness (not to be
   confused with stress emphasis, see
   .Sx \&Em ) .
   When none of the semantic macros fit, it is also adequate for syntax
   elements that have to be given or that appear verbatim.
   .Pp
   Examples:
   .Bd -literal -compact -offset indent
   \&.Sy Warning :
   If
   \&.Sy s
   appears in the owner permissions, set-user-ID mode is set.
   This utility replaces the former
   \&.Sy dumpdir
   program.
   .Ed
   .Pp
 See also  See also
 .Sx \&Bf ,  .Sx \&Bf ,
 .Sx \&Em ,  .Sx \&Em ,
Line 2944  Table cell separator in
Line 2663  Table cell separator in
 lists; can only be used below  lists; can only be used below
 .Sx \&It .  .Sx \&It .
 .Ss \&Tn  .Ss \&Tn
 Format a tradename.  Supported only for compatibility, do not use this in new manuals.
 .Pp  Even though the macro name
 Since this macro is often implemented to use a small caps font,  .Pq Dq tradename
 it has historically been used for acronyms (like ASCII) as well.  suggests a semantic function, historic usage is inconsistent, mostly
 Such usage is not recommended because it would use the same macro  using it as a presentation-level macro to request a small caps font.
 sometimes for semantical annotation, sometimes for physical formatting.  
 .Pp  
 Examples:  
 .Dl \&.Tn IBM  
 .Ss \&Ud  .Ss \&Ud
   Supported only for compatibility, do not use this in new manuals.
 Prints out  Prints out
 .Dq currently under development.  .Dq currently under development.
 .Ss \&Ux  .Ss \&Ux
 Format the UNIX name.  Supported only for compatibility, do not use this in new manuals.
 Accepts no argument.  Prints out
 .Pp  .Dq Ux .
 Examples:  
 .Dl \&.Ux  
 .Pp  
 See also  
 .Sx \&At ,  
 .Sx \&Bsx ,  
 .Sx \&Bx ,  
 .Sx \&Dx ,  
 .Sx \&Fx ,  
 .Sx \&Nx ,  
 and  
 .Sx \&Ox .  
 .Ss \&Va  .Ss \&Va
 A variable name.  A variable name.
 .Pp  .Pp
 Examples:  Examples:
 .Dl \&.Va foo  .Dl \&.Va foo
 .Dl \&.Va const char *bar ;  .Dl \&.Va const char *bar ;
   .Pp
   For function arguments and parameters, use
   .Sx \&Fa
   instead.
   For declarations of global variables in the
   .Em SYNOPSIS
   section, use
   .Sx \&Vt .
 .Ss \&Vt  .Ss \&Vt
 A variable type.  A variable type.
   .Pp
 This is also used for indicating global variables in the  This is also used for indicating global variables in the
 .Em SYNOPSIS  .Em SYNOPSIS
 section, in which case a variable name is also specified.  section, in which case a variable name is also specified.
Line 2994  In the former case, this macro starts a new output lin
Line 2707  In the former case, this macro starts a new output lin
 and a blank line is inserted in front if there is a preceding  and a blank line is inserted in front if there is a preceding
 function definition or include directive.  function definition or include directive.
 .Pp  .Pp
 Note that this should not be confused with  
 .Sx \&Ft ,  
 which is used for function return types.  
 .Pp  
 Examples:  Examples:
 .Dl \&.Vt unsigned char  .Dl \&.Vt unsigned char
 .Dl \&.Vt extern const char * const sys_signame[] \&;  .Dl \&.Vt extern const char * const sys_signame[] \&;
 .Pp  .Pp
   For parameters in function prototypes, use
   .Sx \&Fa
   instead, for function return types
   .Sx \&Ft ,
   and for variable names outside the
   .Em SYNOPSIS
   section
   .Sx \&Va ,
   even when including a type with the name.
 See also  See also
 .Sx MANUAL STRUCTURE  .Sx MANUAL STRUCTURE .
 and  
 .Sx \&Va .  
 .Ss \&Xc  .Ss \&Xc
 Close a scope opened by  Close a scope opened by
 .Sx \&Xo .  .Sx \&Xo .
Line 3022  Link to another manual
Line 2738  Link to another manual
 .Pq Qq cross-reference .  .Pq Qq cross-reference .
 Its syntax is as follows:  Its syntax is as follows:
 .Pp  .Pp
 .D1 Pf \. Sx \&Xr Ar name section  .D1 Pf \. Sx \&Xr Ar name Op section
 .Pp  .Pp
 The  Cross reference the
 .Ar name  .Ar name
 and  and
 .Ar section  .Ar section
 are the name and section of the linked manual.  number of another man page;
 If  omitting the section number is rarely useful.
 .Ar section  
 is followed by non-punctuation, an  
 .Sx \&Ns  
 is inserted into the token stream.  
 This behaviour is for compatibility with  
 GNU troff.  
 .Pp  .Pp
 Examples:  Examples:
 .Dl \&.Xr mandoc 1  .Dl \&.Xr mandoc 1
Line 3059  Its syntax is as follows:
Line 2769  Its syntax is as follows:
 .Pp  .Pp
 The  The
 .Ar height  .Ar height
 argument must be formatted as described in  argument is a scaling width as described in
 .Sx Scaling Widths .  .Xr roff 7 .
 If unspecified,  If unspecified,
 .Sx \&sp  .Sx \&sp
 asserts a single vertical space.  asserts a single vertical space.
   .Sh MACRO SYNTAX
   The syntax of a macro depends on its classification.
   In this section,
   .Sq \-arg
   refers to macro arguments, which may be followed by zero or more
   .Sq parm
   parameters;
   .Sq \&Yo
   opens the scope of a macro; and if specified,
   .Sq \&Yc
   closes it out.
   .Pp
   The
   .Em Callable
   column indicates that the macro may also be called by passing its name
   as an argument to another macro.
   For example,
   .Sq \&.Op \&Fl O \&Ar file
   produces
   .Sq Op Fl O Ar file .
   To prevent a macro call and render the macro name literally,
   escape it by prepending a zero-width space,
   .Sq \e& .
   For example,
   .Sq \&Op \e&Fl O
   produces
   .Sq Op \&Fl O .
   If a macro is not callable but its name appears as an argument
   to another macro, it is interpreted as opaque text.
   For example,
   .Sq \&.Fl \&Sh
   produces
   .Sq Fl \&Sh .
   .Pp
   The
   .Em Parsed
   column indicates whether the macro may call other macros by receiving
   their names as arguments.
   If a macro is not parsed but the name of another macro appears
   as an argument, it is interpreted as opaque text.
   .Pp
   The
   .Em Scope
   column, if applicable, describes closure rules.
   .Ss Block full-explicit
   Multi-line scope closed by an explicit closing macro.
   All macros contains bodies; only
   .Sx \&Bf
   and
   .Pq optionally
   .Sx \&Bl
   contain a head.
   .Bd -literal -offset indent
   \&.Yo \(lB\-arg \(lBparm...\(rB\(rB \(lBhead...\(rB
   \(lBbody...\(rB
   \&.Yc
   .Ed
   .Bl -column "MacroX" "CallableX" "ParsedX" "closed by XXX" -offset indent
   .It Em Macro Ta Em Callable Ta Em Parsed Ta Em Scope
   .It Sx \&Bd  Ta    \&No     Ta    \&No     Ta    closed by Sx \&Ed
   .It Sx \&Bf  Ta    \&No     Ta    \&No     Ta    closed by Sx \&Ef
   .It Sx \&Bk  Ta    \&No     Ta    \&No     Ta    closed by Sx \&Ek
   .It Sx \&Bl  Ta    \&No     Ta    \&No     Ta    closed by Sx \&El
   .It Sx \&Ed  Ta    \&No     Ta    \&No     Ta    opened by Sx \&Bd
   .It Sx \&Ef  Ta    \&No     Ta    \&No     Ta    opened by Sx \&Bf
   .It Sx \&Ek  Ta    \&No     Ta    \&No     Ta    opened by Sx \&Bk
   .It Sx \&El  Ta    \&No     Ta    \&No     Ta    opened by Sx \&Bl
   .El
   .Ss Block full-implicit
   Multi-line scope closed by end-of-file or implicitly by another macro.
   All macros have bodies; some
   .Po
   .Sx \&It Fl bullet ,
   .Fl hyphen ,
   .Fl dash ,
   .Fl enum ,
   .Fl item
   .Pc
   don't have heads; only one
   .Po
   .Sx \&It
   in
   .Sx \&Bl Fl column
   .Pc
   has multiple heads.
   .Bd -literal -offset indent
   \&.Yo \(lB\-arg \(lBparm...\(rB\(rB \(lBhead... \(lBTa head...\(rB\(rB
   \(lBbody...\(rB
   .Ed
   .Bl -column "MacroX" "CallableX" "ParsedX" "closed by XXXXXXXXXXX" -offset indent
   .It Em Macro Ta Em Callable Ta Em Parsed Ta Em Scope
   .It Sx \&It Ta \&No Ta Yes  Ta closed by Sx \&It , Sx \&El
   .It Sx \&Nd Ta \&No Ta \&No Ta closed by Sx \&Sh
   .It Sx \&Nm Ta \&No Ta Yes  Ta closed by Sx \&Nm , Sx \&Sh , Sx \&Ss
   .It Sx \&Sh Ta \&No Ta Yes  Ta closed by Sx \&Sh
   .It Sx \&Ss Ta \&No Ta Yes  Ta closed by Sx \&Sh , Sx \&Ss
   .El
   .Pp
   Note that the
   .Sx \&Nm
   macro is a
   .Sx Block full-implicit
   macro only when invoked as the first macro
   in a
   .Em SYNOPSIS
   section line, else it is
   .Sx In-line .
   .Ss Block partial-explicit
   Like block full-explicit, but also with single-line scope.
   Each has at least a body and, in limited circumstances, a head
   .Po
   .Sx \&Fo ,
   .Sx \&Eo
   .Pc
   and/or tail
   .Pq Sx \&Ec .
   .Bd -literal -offset indent
   \&.Yo \(lB\-arg \(lBparm...\(rB\(rB \(lBhead...\(rB
   \(lBbody...\(rB
   \&.Yc \(lBtail...\(rB
   
   \&.Yo \(lB\-arg \(lBparm...\(rB\(rB \(lBhead...\(rB \
   \(lBbody...\(rB \&Yc \(lBtail...\(rB
   .Ed
   .Bl -column "MacroX" "CallableX" "ParsedX" "closed by XXXX" -offset indent
   .It Em Macro Ta Em Callable Ta Em Parsed Ta Em Scope
   .It Sx \&Ac  Ta    Yes      Ta    Yes      Ta    opened by Sx \&Ao
   .It Sx \&Ao  Ta    Yes      Ta    Yes      Ta    closed by Sx \&Ac
   .It Sx \&Bc  Ta    Yes      Ta    Yes      Ta    closed by Sx \&Bo
   .It Sx \&Bo  Ta    Yes      Ta    Yes      Ta    opened by Sx \&Bc
   .It Sx \&Brc Ta    Yes      Ta    Yes      Ta    opened by Sx \&Bro
   .It Sx \&Bro Ta    Yes      Ta    Yes      Ta    closed by Sx \&Brc
   .It Sx \&Dc  Ta    Yes      Ta    Yes      Ta    opened by Sx \&Do
   .It Sx \&Do  Ta    Yes      Ta    Yes      Ta    closed by Sx \&Dc
   .It Sx \&Ec  Ta    Yes      Ta    Yes      Ta    opened by Sx \&Eo
   .It Sx \&Eo  Ta    Yes      Ta    Yes      Ta    closed by Sx \&Ec
   .It Sx \&Fc  Ta    Yes      Ta    Yes      Ta    opened by Sx \&Fo
   .It Sx \&Fo  Ta    \&No     Ta    \&No     Ta    closed by Sx \&Fc
   .It Sx \&Oc  Ta    Yes      Ta    Yes      Ta    closed by Sx \&Oo
   .It Sx \&Oo  Ta    Yes      Ta    Yes      Ta    opened by Sx \&Oc
   .It Sx \&Pc  Ta    Yes      Ta    Yes      Ta    closed by Sx \&Po
   .It Sx \&Po  Ta    Yes      Ta    Yes      Ta    opened by Sx \&Pc
   .It Sx \&Qc  Ta    Yes      Ta    Yes      Ta    opened by Sx \&Oo
   .It Sx \&Qo  Ta    Yes      Ta    Yes      Ta    closed by Sx \&Oc
   .It Sx \&Re  Ta    \&No     Ta    \&No     Ta    opened by Sx \&Rs
   .It Sx \&Rs  Ta    \&No     Ta    \&No     Ta    closed by Sx \&Re
   .It Sx \&Sc  Ta    Yes      Ta    Yes      Ta    opened by Sx \&So
   .It Sx \&So  Ta    Yes      Ta    Yes      Ta    closed by Sx \&Sc
   .It Sx \&Xc  Ta    Yes      Ta    Yes      Ta    opened by Sx \&Xo
   .It Sx \&Xo  Ta    Yes      Ta    Yes      Ta    closed by Sx \&Xc
   .El
   .Ss Block partial-implicit
   Like block full-implicit, but with single-line scope closed by the
   end of the line.
   .Bd -literal -offset indent
   \&.Yo \(lB\-arg \(lBval...\(rB\(rB \(lBbody...\(rB \(lBres...\(rB
   .Ed
   .Bl -column "MacroX" "CallableX" "ParsedX" -offset indent
   .It Em Macro Ta Em Callable Ta Em Parsed
   .It Sx \&Aq  Ta    Yes      Ta    Yes
   .It Sx \&Bq  Ta    Yes      Ta    Yes
   .It Sx \&Brq Ta    Yes      Ta    Yes
   .It Sx \&D1  Ta    \&No     Ta    \&Yes
   .It Sx \&Dl  Ta    \&No     Ta    Yes
   .It Sx \&Dq  Ta    Yes      Ta    Yes
   .It Sx \&En  Ta    Yes      Ta    Yes
   .It Sx \&Op  Ta    Yes      Ta    Yes
   .It Sx \&Pq  Ta    Yes      Ta    Yes
   .It Sx \&Ql  Ta    Yes      Ta    Yes
   .It Sx \&Qq  Ta    Yes      Ta    Yes
   .It Sx \&Sq  Ta    Yes      Ta    Yes
   .It Sx \&Vt  Ta    Yes      Ta    Yes
   .El
   .Pp
   Note that the
   .Sx \&Vt
   macro is a
   .Sx Block partial-implicit
   only when invoked as the first macro
   in a
   .Em SYNOPSIS
   section line, else it is
   .Sx In-line .
   .Ss Special block macro
   The
   .Sx \&Ta
   macro can only be used below
   .Sx \&It
   in
   .Sx \&Bl Fl column
   lists.
   It delimits blocks representing table cells;
   these blocks have bodies, but no heads.
   .Bl -column "MacroX" "CallableX" "ParsedX" "closed by XXXX" -offset indent
   .It Em Macro Ta Em Callable Ta Em Parsed Ta Em Scope
   .It Sx \&Ta  Ta    Yes      Ta    Yes    Ta closed by Sx \&Ta , Sx \&It
   .El
   .Ss In-line
   Closed by the end of the line, fixed argument lengths,
   and/or subsequent macros.
   In-line macros have only text children.
   If a number (or inequality) of arguments is
   .Pq n ,
   then the macro accepts an arbitrary number of arguments.
   .Bd -literal -offset indent
   \&.Yo \(lB\-arg \(lBval...\(rB\(rB \(lBargs...\(rB \(lBres...\(rB
   
   \&.Yo \(lB\-arg \(lBval...\(rB\(rB \(lBargs...\(rB Yc...
   
   \&.Yo \(lB\-arg \(lBval...\(rB\(rB arg0 arg1 argN
   .Ed
   .Bl -column "MacroX" "CallableX" "ParsedX" "Arguments" -offset indent
   .It Em Macro Ta Em Callable Ta Em Parsed Ta Em Arguments
   .It Sx \&%A  Ta    \&No     Ta    \&No     Ta    >0
   .It Sx \&%B  Ta    \&No     Ta    \&No     Ta    >0
   .It Sx \&%C  Ta    \&No     Ta    \&No     Ta    >0
   .It Sx \&%D  Ta    \&No     Ta    \&No     Ta    >0
   .It Sx \&%I  Ta    \&No     Ta    \&No     Ta    >0
   .It Sx \&%J  Ta    \&No     Ta    \&No     Ta    >0
   .It Sx \&%N  Ta    \&No     Ta    \&No     Ta    >0
   .It Sx \&%O  Ta    \&No     Ta    \&No     Ta    >0
   .It Sx \&%P  Ta    \&No     Ta    \&No     Ta    >0
   .It Sx \&%Q  Ta    \&No     Ta    \&No     Ta    >0
   .It Sx \&%R  Ta    \&No     Ta    \&No     Ta    >0
   .It Sx \&%T  Ta    \&No     Ta    \&No     Ta    >0
   .It Sx \&%U  Ta    \&No     Ta    \&No     Ta    >0
   .It Sx \&%V  Ta    \&No     Ta    \&No     Ta    >0
   .It Sx \&Ad  Ta    Yes      Ta    Yes      Ta    >0
   .It Sx \&An  Ta    Yes      Ta    Yes      Ta    >0
   .It Sx \&Ap  Ta    Yes      Ta    Yes      Ta    0
   .It Sx \&Ar  Ta    Yes      Ta    Yes      Ta    n
   .It Sx \&At  Ta    Yes      Ta    Yes      Ta    1
   .It Sx \&Bsx Ta    Yes      Ta    Yes      Ta    n
   .It Sx \&Bt  Ta    \&No     Ta    \&No     Ta    0
   .It Sx \&Bx  Ta    Yes      Ta    Yes      Ta    n
   .It Sx \&Cd  Ta    Yes      Ta    Yes      Ta    >0
   .It Sx \&Cm  Ta    Yes      Ta    Yes      Ta    >0
   .It Sx \&Db  Ta    \&No     Ta    \&No     Ta    1
   .It Sx \&Dd  Ta    \&No     Ta    \&No     Ta    n
   .It Sx \&Dt  Ta    \&No     Ta    \&No     Ta    n
   .It Sx \&Dv  Ta    Yes      Ta    Yes      Ta    >0
   .It Sx \&Dx  Ta    Yes      Ta    Yes      Ta    n
   .It Sx \&Em  Ta    Yes      Ta    Yes      Ta    >0
   .It Sx \&Er  Ta    Yes      Ta    Yes      Ta    >0
   .It Sx \&Es  Ta    Yes      Ta    Yes      Ta    2
   .It Sx \&Ev  Ta    Yes      Ta    Yes      Ta    >0
   .It Sx \&Ex  Ta    \&No     Ta    \&No     Ta    n
   .It Sx \&Fa  Ta    Yes      Ta    Yes      Ta    >0
   .It Sx \&Fd  Ta    \&No     Ta    \&No     Ta    >0
   .It Sx \&Fl  Ta    Yes      Ta    Yes      Ta    n
   .It Sx \&Fn  Ta    Yes      Ta    Yes      Ta    >0
   .It Sx \&Fr  Ta    Yes      Ta    Yes      Ta    >0
   .It Sx \&Ft  Ta    Yes      Ta    Yes      Ta    >0
   .It Sx \&Fx  Ta    Yes      Ta    Yes      Ta    n
   .It Sx \&Hf  Ta    \&No     Ta    \&No     Ta    n
   .It Sx \&Ic  Ta    Yes      Ta    Yes      Ta    >0
   .It Sx \&In  Ta    \&No     Ta    \&No     Ta    1
   .It Sx \&Lb  Ta    \&No     Ta    \&No     Ta    1
   .It Sx \&Li  Ta    Yes      Ta    Yes      Ta    >0
   .It Sx \&Lk  Ta    Yes      Ta    Yes      Ta    >0
   .It Sx \&Lp  Ta    \&No     Ta    \&No     Ta    0
   .It Sx \&Ms  Ta    Yes      Ta    Yes      Ta    >0
   .It Sx \&Mt  Ta    Yes      Ta    Yes      Ta    >0
   .It Sx \&Nm  Ta    Yes      Ta    Yes      Ta    n
   .It Sx \&No  Ta    Yes      Ta    Yes      Ta    0
   .It Sx \&Ns  Ta    Yes      Ta    Yes      Ta    0
   .It Sx \&Nx  Ta    Yes      Ta    Yes      Ta    n
   .It Sx \&Os  Ta    \&No     Ta    \&No     Ta    n
   .It Sx \&Ot  Ta    Yes      Ta    Yes      Ta    >0
   .It Sx \&Ox  Ta    Yes      Ta    Yes      Ta    n
   .It Sx \&Pa  Ta    Yes      Ta    Yes      Ta    n
   .It Sx \&Pf  Ta    Yes      Ta    Yes      Ta    1
   .It Sx \&Pp  Ta    \&No     Ta    \&No     Ta    0
   .It Sx \&Rv  Ta    \&No     Ta    \&No     Ta    n
   .It Sx \&Sm  Ta    \&No     Ta    \&No     Ta    <2
   .It Sx \&St  Ta    \&No     Ta    Yes      Ta    1
   .It Sx \&Sx  Ta    Yes      Ta    Yes      Ta    >0
   .It Sx \&Sy  Ta    Yes      Ta    Yes      Ta    >0
   .It Sx \&Tn  Ta    Yes      Ta    Yes      Ta    >0
   .It Sx \&Ud  Ta    \&No     Ta    \&No     Ta    0
   .It Sx \&Ux  Ta    Yes      Ta    Yes      Ta    n
   .It Sx \&Va  Ta    Yes      Ta    Yes      Ta    n
   .It Sx \&Vt  Ta    Yes      Ta    Yes      Ta    >0
   .It Sx \&Xr  Ta    Yes      Ta    Yes      Ta    >0
   .It Sx \&br  Ta    \&No     Ta    \&No     Ta    0
   .It Sx \&sp  Ta    \&No     Ta    \&No     Ta    1
   .El
   .Ss Delimiters
   When a macro argument consists of one single input character
   considered as a delimiter, the argument gets special handling.
   This does not apply when delimiters appear in arguments containing
   more than one character.
   Consequently, to prevent special handling and just handle it
   like any other argument, a delimiter can be escaped by prepending
   a zero-width space
   .Pq Sq \e& .
   In text lines, delimiters never need escaping, but may be used
   as normal punctuation.
   .Pp
   For many macros, when the leading arguments are opening delimiters,
   these delimiters are put before the macro scope,
   and when the trailing arguments are closing delimiters,
   these delimiters are put after the macro scope.
   For example,
   .Pp
   .D1 Pf \. \&Aq "( [ word ] ) ."
   .Pp
   renders as:
   .Pp
   .D1 Aq ( [ word ] ) .
   .Pp
   Opening delimiters are:
   .Pp
   .Bl -tag -width Ds -offset indent -compact
   .It \&(
   left parenthesis
   .It \&[
   left bracket
   .El
   .Pp
   Closing delimiters are:
   .Pp
   .Bl -tag -width Ds -offset indent -compact
   .It \&.
   period
   .It \&,
   comma
   .It \&:
   colon
   .It \&;
   semicolon
   .It \&)
   right parenthesis
   .It \&]
   right bracket
   .It \&?
   question mark
   .It \&!
   exclamation mark
   .El
   .Pp
   Note that even a period preceded by a backslash
   .Pq Sq \e.\&
   gets this special handling; use
   .Sq \e&.
   to prevent that.
   .Pp
   Many in-line macros interrupt their scope when they encounter
   delimiters, and resume their scope when more arguments follow that
   are not delimiters.
   For example,
   .Pp
   .D1 Pf \. \&Fl "a ( b | c \e*(Ba d ) e"
   .Pp
   renders as:
   .Pp
   .D1 Fl a ( b | c \*(Ba d ) e
   .Pp
   This applies to both opening and closing delimiters,
   and also to the middle delimiter:
   .Pp
   .Bl -tag -width Ds -offset indent -compact
   .It \&|
   vertical bar
   .El
   .Pp
   As a special case, the predefined string \e*(Ba is handled and rendered
   in the same way as a plain
   .Sq \&|
   character.
   Using this predefined string is not recommended in new manuals.
   .Ss Font handling
   In
   .Nm
   documents, usage of semantic markup is recommended in order to have
   proper fonts automatically selected; only when no fitting semantic markup
   is available, consider falling back to
   .Sx Physical markup
   macros.
   Whenever any
   .Nm
   macro switches the
   .Xr roff 7
   font mode, it will automatically restore the previous font when exiting
   its scope.
   Manually switching the font using the
   .Xr roff 7
   .Ql \ef
   font escape sequences is never required.
 .Sh COMPATIBILITY  .Sh COMPATIBILITY
 This section documents compatibility between mandoc and other other  This section provides an incomplete list of compatibility issues
 troff implementations, at this time limited to GNU troff  between mandoc and other troff implementations, at this time limited
   to GNU troff
 .Pq Qq groff .  .Pq Qq groff .
 The term  The term
 .Qq historic groff  .Qq historic groff
Line 3101  Newer groff and mandoc print
Line 3201  Newer groff and mandoc print
 and the arguments.  and the arguments.
 .It  .It
 .Sx \&Bl Fl column  .Sx \&Bl Fl column
 does not recognize trailing punctuation characters when they immediately  does not recognise trailing punctuation characters when they immediately
 precede tabulator characters, but treats them as normal text and  precede tabulator characters, but treats them as normal text and
 outputs a space before them.  outputs a space before them.
 .It  .It
Line 3175  certain list types.
Line 3275  certain list types.
 can only be called by other macros, but not at the beginning of a line.  can only be called by other macros, but not at the beginning of a line.
 .It  .It
 .Sx \&%C  .Sx \&%C
 is not implemented.  is not implemented (up to and including groff-1.22.2).
 .It  .It
 Historic groff only allows up to eight or nine arguments per macro input  Historic groff only allows up to eight or nine arguments per macro input
 line, depending on the exact situation.  line, depending on the exact situation.
Line 3193  in new groff and mandoc.
Line 3293  in new groff and mandoc.
 .Sq \ef  .Sq \ef
 .Pq font face  .Pq font face
 and  and
 .Sq \ef  .Sq \eF
 .Pq font family face  .Pq font family face
 .Sx Text Decoration  .Sx Text Decoration
 escapes behave irregularly when specified within line-macro scopes.  escapes behave irregularly when specified within line-macro scopes.
Line 3210  The following features are unimplemented in mandoc:
Line 3310  The following features are unimplemented in mandoc:
 .Fl file Ar file .  .Fl file Ar file .
 .It  .It
 .Sx \&Bd  .Sx \&Bd
 .Fl offset Ar center  .Fl offset Cm center
 and  and
 .Fl offset Ar right .  .Fl offset Cm right .
 Groff does not implement centered and flush-right rendering either,  Groff does not implement centred and flush-right rendering either,
 but produces large indentations.  but produces large indentations.
 .It  
 The  
 .Sq \eh  
 .Pq horizontal position ,  
 .Sq \ev  
 .Pq vertical position ,  
 .Sq \em  
 .Pq text colour ,  
 .Sq \eM  
 .Pq text filling colour ,  
 .Sq \ez  
 .Pq zero-length character ,  
 .Sq \ew  
 .Pq string length ,  
 .Sq \ek  
 .Pq horizontal position marker ,  
 .Sq \eo  
 .Pq text overstrike ,  
 and  
 .Sq \es  
 .Pq text size  
 escape sequences are all discarded in mandoc.  
 .It  
 The  
 .Sq \ef  
 scaling unit is accepted by mandoc, but rendered as the default unit.  
 .It  
 In quoted literals, groff allows pairwise double-quotes to produce a  
 standalone double-quote in formatted output.  
 This is not supported by mandoc.  
 .El  .El
 .Sh SEE ALSO  .Sh SEE ALSO
 .Xr man 1 ,  .Xr man 1 ,
Line 3269  utility written by Kristaps Dzonsons appeared in
Line 3339  utility written by Kristaps Dzonsons appeared in
 The  The
 .Nm  .Nm
 reference was written by  reference was written by
 .An Kristaps Dzonsons Aq kristaps@bsd.lv .  .An Kristaps Dzonsons Aq Mt kristaps@bsd.lv .
Legend:
Removed from v.1.201  
changed lines
  Added in v.1.243
CVSweb