[BACK]Return to mdoc.7 CVS log [TXT][DIR] Up to [cvsweb.bsd.lv] / mandoc

Diff for /mandoc/mdoc.7 between version 1.117 and 1.210

version 1.117, 2010/06/04 20:57:26 version 1.210, 2011/09/18 07:57:16
Line 1 
Line 1 
 .\"     $Id$  .\"     $Id$
 .\"  .\"
 .\" Copyright (c) 2009 Kristaps Dzonsons <kristaps@bsd.lv>  .\" Copyright (c) 2009, 2010, 2011 Kristaps Dzonsons <kristaps@bsd.lv>
   .\" Copyright (c) 2010 Ingo Schwarze <schwarze@openbsd.org>
 .\"  .\"
 .\" Permission to use, copy, modify, and distribute this software for any  .\" Permission to use, copy, modify, and distribute this software for any
 .\" purpose with or without fee is hereby granted, provided that the above  .\" purpose with or without fee is hereby granted, provided that the above
Line 26  The
Line 27  The
 language is used to format  language is used to format
 .Bx  .Bx
 .Ux  .Ux
 manuals.  In this reference document, we describe its syntax, structure,  manuals.
 and usage.  Our reference implementation is mandoc; the  This reference document describes its syntax, structure, and
   usage.
   The reference implementation for
   .Nm
   formatting is
   .Xr mandoc 1 ;
   the
 .Sx COMPATIBILITY  .Sx COMPATIBILITY
 section describes compatibility with other troff \-mdoc implementations.  section describes compatibility with other implementations.
 .Pp  .Pp
 An  An
 .Nm  .Nm
 document follows simple rules:  lines beginning with the control  document follows simple rules: lines beginning with the control
 character  character
 .Sq \.  .Sq \&.
 are parsed for macros.  Other lines are interpreted within the scope of  are parsed for macros.
 prior macros:  Lines not beginning with the control character are
   interpreted within the scope of prior macros:
 .Bd -literal -offset indent  .Bd -literal -offset indent
 \&.Sh Macro lines change control state.  \&.Sh Macro lines change control state.
 Other lines are interpreted within the current state.  Text lines are interpreted within the current state.
 .Ed  .Ed
 .Sh LANGUAGE SYNTAX  .Sh LANGUAGE SYNTAX
 .Nm  .Nm
 documents may contain only graphable 7-bit ASCII characters, the space  documents may contain only graphable 7-bit ASCII characters, the space
 character, and, in certain circumstances, the tab character.  All  character, and, in certain circumstances, the tab character.
 manuals must have  The back-space character
 .Ux  .Sq \e
 line terminators.  indicates the start of an escape sequence for
   .Sx Comments ,
   .Sx Predefined Strings ,
   and
   .Sx Special Characters .
 .Ss Comments  .Ss Comments
 Text following a  Text following an escaped double-quote
 .Sq \e" ,  .Sq \e\(dq ,
 whether in a macro or free-form text line, is ignored to the end of  whether in a macro or text line, is ignored to the end of
 line.  A macro line with only a control character and comment escape,  line.
 .Sq \&.\e" ,  A macro line beginning with a control character and comment escape
 is also ignored.  Macro lines with only a control charater and optionally  .Sq \&.\e\(dq
 whitespace are stripped from input.  is also ignored.
 .Ss Reserved Characters  Furthermore,
 Within a macro line, the following characters are reserved:  macro lines with only a control character and optional trailing
   whitespace are
   stripped from input.
 .Pp  .Pp
 .Bl -tag -width Ds -offset indent -compact  Examples:
 .It \&.  .Bd -literal -offset indent -compact
 .Pq period  \&.\e\(dq This is a comment line.
 .It \&,  \&.\e\(dq The next line is ignored:
 .Pq comma  \&.
 .It \&:  \&.Em Emphasis \e\(dq This is also a comment.
 .Pq colon  .Ed
 .It \&;  
 .Pq semicolon  
 .It \&(  
 .Pq left-parenthesis  
 .It \&)  
 .Pq right-parenthesis  
 .It \&[  
 .Pq left-bracket  
 .It \&]  
 .Pq right-bracket  
 .It \&?  
 .Pq question  
 .It \&!  
 .Pq exclamation  
 .It \&|  
 .Pq vertical bar  
 .El  
 .Pp  
 Use of reserved characters is described in  
 .Sx MACRO SYNTAX .  
 For general use in macro lines, these characters must either be escaped  
 with a non-breaking space  
 .Pq Sq \e&  
 or, if applicable, an appropriate escape sequence used.  
 .Ss Special Characters  .Ss Special Characters
 Special characters may occur in both macro and free-form lines.  Special characters are used to encode special glyphs and are rendered
   differently across output media.
   They may occur in both macro and text lines.
 Sequences begin with the escape character  Sequences begin with the escape character
 .Sq \e  .Sq \e
 followed by either an open-parenthesis  followed by either an open-parenthesis
Line 101  for two-character sequences; an open-bracket
Line 93  for two-character sequences; an open-bracket
 .Sq \&[  .Sq \&[
 for n-character sequences (terminated at a close-bracket  for n-character sequences (terminated at a close-bracket
 .Sq \&] ) ;  .Sq \&] ) ;
 or a single one-character sequence.  or a single one character sequence.
   .Pp
   Examples:
   .Bl -tag -width Ds -offset indent -compact
   .It Li \e(em
   Two-letter em dash escape.
   .It Li \ee
   One-letter backslash escape.
   .El
   .Pp
 See  See
 .Xr mandoc_char 7  .Xr mandoc_char 7
 for a complete list.  for a complete list.
 Examples include  
 .Sq \e(em  
 .Pq em-dash  
 and  
 .Sq \ee  
 .Pq back-slash .  
 .Ss Text Decoration  .Ss Text Decoration
 Terms may be text-decorated using the  Terms may be text-decorated using the
 .Sq \ef  .Sq \ef
 escape followed by an indicator: B (bold), I, (italic), R (Roman), or P  escape followed by an indicator: B (bold), I (italic), R (regular), or P
 (revert to previous mode):  (revert to previous mode).
 .Pp  A numerical representation 3, 2, or 1 (bold, italic, and regular,
 .D1 \efBbold\efR \efIitalic\efP  
 .Pp  
 A numerical representation 3, 2, or 1 (bold, italic, and Roman,  
 respectively) may be used instead.  respectively) may be used instead.
 A text decoration is valid within  If a macro opens a font scope after calling
 the current font scope only:  if a macro opens a font scope alongside  .Sq \ef ,
 its own scope, such as  such as with
 .Sx \&Bf  .Sx \&Bf ,
 .Cm \&Sy ,  the
 in-scope invocations of  
 .Sq \ef  .Sq \ef
 are only valid within the font scope of the macro.  mode will be restored upon exiting the
 If  .Sx \&Bf
 .Sq \ef  scope.
 is specified outside of any font scope, such as in unenclosed, free-form  
 text, it will affect the remainder of the document.  
 .Pp  .Pp
 Text may also be sized with the  Examples:
 .Sq \es  .Bl -tag -width Ds -offset indent -compact
 escape, whose syntax is one of  .It Li \efBbold\efR
 .Sq \es+-n  Write in bold, then switch to regular font mode.
 for one-digit numerals;  .It Li \efIitalic\efP
 .Sq \es(+-nn  Write in italic, then return to previous font mode.
 or  .El
 .Sq \es+-(nn  
 for two-digit numerals; and  
 .Sq \es[+-N] ,  
 .Sq \es+-[N] ,  
 .Sq \es'+-N' ,  
 or  
 .Sq \es+-'N'  
 for arbitrary-digit numerals:  
 .Pp  .Pp
 .D1 \es+1bigger\es-1  Text decoration is
 .D1 \es[+10]much bigger\es[-10]  
 .D1 \es+(10much bigger\es-(10  
 .D1 \es+'100'much much bigger\es-'100'  
 .Pp  
 Note these forms are  
 .Em not  .Em not
 recommended for  recommended for
 .Nm ,  .Nm ,
 which encourages semantic annotation.  which encourages semantic annotation.
 .Ss Predefined Strings  .Ss Predefined Strings
 Historically,  Predefined strings, like
 .Xr groff 1  
 also defined a set of package-specific  
 .Dq predefined strings ,  
 which, like  
 .Sx Special Characters ,  .Sx Special Characters ,
 demark special output characters and strings by way of input codes.  mark special output glyphs.
 Predefined strings are escaped with the slash-asterisk,  Predefined strings are escaped with the slash-asterisk,
 .Sq \e* :  .Sq \e* :
 single-character  single-character
Line 176  two-character
Line 148  two-character
 .Sq \e*(XX ,  .Sq \e*(XX ,
 and N-character  and N-character
 .Sq \e*[N] .  .Sq \e*[N] .
 See  .Pp
 .Xr mandoc_char 7  Examples:
 for a complete list.  .Bl -tag -width Ds -offset indent -compact
 Examples include  .It Li \e*(Am
 .Sq \e*(Am  Two-letter ampersand predefined string.
 .Pq ampersand  .It Li \e*q
 and  One-letter double-quote predefined string.
 .Sq \e*(Ba  .El
 .Pq vertical bar .  .Pp
   These strings are set using
   .Xr roff 7 ,
   although
   .Nm
   consists of several pre-set escapes listed in
   .Xr mandoc_char 7 .
 .Ss Whitespace  .Ss Whitespace
 Whitespace consists of the space character.  Whitespace consists of the space character.
 In free-form lines, whitespace is preserved within a line; un-escaped  In text lines, whitespace is preserved within a line.
 trailing spaces are stripped from input (unless in a literal context).  
 Blank free-form lines, which may include whitespace, are only permitted  
 within literal contexts.  
 .Pp  
 In macro lines, whitespace delimits arguments and is discarded.  In macro lines, whitespace delimits arguments and is discarded.
 If arguments are quoted, whitespace within the quotes is retained.  
 .Ss Quotation  
 Macro arguments may be quoted with a double-quote to group  
 space-delimited terms or to retain blocks of whitespace.  
 A quoted argument begins with a double-quote preceded by whitespace.  
 The next double-quote not pair-wise adjacent to another double-quote  
 terminates the literal, regardless of surrounding whitespace.  
 .Pp  .Pp
 This produces tokens  Unescaped trailing spaces are stripped from text line input unless in a
 .Sq a" ,  literal context.
 .Sq b c ,  In general, trailing whitespace on any input line is discouraged for
 .Sq de ,  reasons of portability.
 and  In the rare case that a blank character is needed at the end of an
 .Sq fg" .  input line, it may be forced by
 Note that any quoted term, be it argument or macro, is indiscriminately  .Sq \e\ \e& .
 considered literal text.  
 Thus, the following produces  
 .Sq \&Em a :  
 .Bd -literal -offset indent  
 \&.Em "Em a"  
 .Ed  
 .Pp  .Pp
 In free-form mode, quotes are regarded as opaque text.  In general, space characters can be rendered as literal
 .Ss Dates  characters by using non-breaking space escapes or
 There are several macros in  .Sx Quotation .
 .Nm  
 that require a date argument.  
 The canonical form for dates is the American format:  
 .Pp  .Pp
 .D1 Cm Month Day , Year  Blank text lines, which may include whitespace, are only permitted
   within literal contexts.
   If the first character of a text line is a space, that line is printed
   with a leading newline.
   .Ss Quotation
   Macro arguments may be quoted with double-quotes to so that the
   enclosed text is one literal term.
   Quoted text, even if whitespace or if it would cause a macro invocation
   when unquoted, is considered literal text.
 .Pp  .Pp
 The  A quoted argument begins with a double-quote preceded by whitespace.
 .Cm Day  The next double-quote not pairwise adjacent to another double-quote
 value is an optionally zero-padded numeral.  terminates the literal, regardless of surrounding whitespace.
 The  
 .Cm Month  
 value is the full month name.  
 The  
 .Cm Year  
 value is the full four-digit year.  
 .Pp  .Pp
 Reduced form dates are broken-down canonical form dates:  Examples:
 .Pp  .Bl -tag -width Ds -offset indent -compact
 .D1 Cm Month , Year  .It Li .Fn strlen \(dqconst char *s\(dq
 .D1 Cm Year  Group arguments
 .Pp  .Qq const char *s
 Some examples of valid dates follow:  into one function argument.
 .Pp  If unspecified,
 .D1 "May, 2009" Pq reduced form  .Qq const ,
 .D1 "2009" Pq reduced form  .Qq char ,
 .D1 "May 20, 2009" Pq canonical form  and
   .Qq *s
   would be considered separate arguments.
   .Pq See Sx \&Fn .
   .It Li .Op \(dqFl a\(dq
   Consider
   .Qq \&Fl a
   as literal text instead of a flag macro.
   .Pq Aee Sx \&Op , \&Fl .
   .El
 .Ss Scaling Widths  .Ss Scaling Widths
 Many macros support scaled widths for their arguments, such as  Many macros support scaled widths for their arguments.
 stipulating a two-inch list indentation with the following:  The syntax for a scaled width is
 .Bd -literal -offset indent  
 \&.Bl -tag -width 2i  
 .Ed  
 .Pp  
 The syntax for scaled widths is  
 .Sq Li [+-]?[0-9]*.[0-9]*[:unit:] ,  .Sq Li [+-]?[0-9]*.[0-9]*[:unit:] ,
 where a decimal must be preceded or proceeded by at least one digit.  where a decimal must be preceded or proceeded by at least one digit.
 Negative numbers, while accepted, are truncated to zero.  Negative numbers, while accepted, are truncated to zero.
   .Pp
 The following scaling units are accepted:  The following scaling units are accepted:
 .Pp  .Pp
 .Bl -tag -width Ds -offset indent -compact  .Bl -tag -width Ds -offset indent -compact
Line 296  or
Line 261  or
 is necessarily non-portable across output media.  is necessarily non-portable across output media.
 See  See
 .Sx COMPATIBILITY .  .Sx COMPATIBILITY .
   .Pp
   Examples:
   .Bl -tag -width Ds -offset indent -compact
   .It Li \&.Bl -tag -width 2i
   two-inch tagged list indentation
   .Pq see Sx \&Bl
   .It Li \&.sp 2v
   two vertical spaces
   .Pq see Sx \&sp
   .El
 .Ss Sentence Spacing  .Ss Sentence Spacing
 When composing a manual, make sure that your sentences end at the end of  Sentences should terminate at the end of an input line.
 a line.  By doing this, a formatter will be able to apply the proper amount of
 By doing so, front-ends will be able to apply the proper amount of  
 spacing after the end of sentence (unescaped) period, exclamation mark,  spacing after the end of sentence (unescaped) period, exclamation mark,
 or question mark followed by zero or more non-sentence closing  or question mark followed by zero or more non-sentence closing
 delimiters (  delimiters
 .Ns Sq \&) ,  .Po
   .Sq \&) ,
 .Sq \&] ,  .Sq \&] ,
 .Sq \&' ,  .Sq \&' ,
 .Sq \&" ) .  .Sq \&"
   .Pc .
 .Pp  .Pp
 The proper spacing is also intelligently preserved if a sentence ends at  The proper spacing is also intelligently preserved if a sentence ends at
 the boundary of a macro line, e.g.,  the boundary of a macro line.
 .Pp  .Pp
 .D1 \&Xr mandoc 1 \.  Examples:
 .D1 \&Fl T \&Ns \&Cm ascii \.  .Bd -literal -offset indent -compact
   Do not end sentences mid-line like this.  Instead,
   end a sentence like this.
   A macro would end like this:
   \&.Xr mandoc 1 \&.
   .Ed
 .Sh MANUAL STRUCTURE  .Sh MANUAL STRUCTURE
 A well-formed  A well-formed
 .Nm  .Nm
 document consists of a document prologue followed by one or more  document consists of a document prologue followed by one or more
 sections.  sections.
 .Pp  .Pp
 The prologue, which consists of (in order) the  The prologue, which consists of the
 .Sx \&Dd ,  .Sx \&Dd ,
 .Sx \&Dt ,  .Sx \&Dt ,
 and  and
 .Sx \&Os  .Sx \&Os
 macros, is required for every document.  macros in that order, is required for every document.
 .Pp  .Pp
 The first section (sections are denoted by  The first section (sections are denoted by
 .Sx \&Sh )  .Sx \&Sh )
Line 333  must be the NAME section, consisting of at least one
Line 314  must be the NAME section, consisting of at least one
 followed by  followed by
 .Sx \&Nd .  .Sx \&Nd .
 .Pp  .Pp
 Following that, convention dictates specifying at least the SYNOPSIS and  Following that, convention dictates specifying at least the
 DESCRIPTION sections, although this varies between manual sections.  .Em SYNOPSIS
   and
   .Em DESCRIPTION
   sections, although this varies between manual sections.
 .Pp  .Pp
 The following is a well-formed skeleton  The following is a well-formed skeleton
 .Nm  .Nm
 file:  file for a utility
   .Qq progname :
 .Bd -literal -offset indent  .Bd -literal -offset indent
 \&.Dd $\&Mdocdate$  \&.Dd $\&Mdocdate$
 \&.Dt mdoc 7  \&.Dt PROGNAME section
 \&.Os  \&.Os
 \&.Sh NAME  \&.Sh NAME
 \&.Nm foo  \&.Nm progname
 \&.Nd a description goes here  \&.Nd one line about what it does
 \&.\e\*q The next is for sections 2, 3, & 9 only.  \&.\e\(dq .Sh LIBRARY
 \&.\e\*q .Sh LIBRARY  \&.\e\(dq For sections 2, 3, & 9 only.
   \&.\e\(dq Not used in OpenBSD.
 \&.Sh SYNOPSIS  \&.Sh SYNOPSIS
 \&.Nm foo  \&.Nm progname
 \&.Op Fl options  \&.Op Fl options
 \&.Ar  \&.Ar
 \&.Sh DESCRIPTION  \&.Sh DESCRIPTION
 The  The
 \&.Nm  \&.Nm
 utility processes files ...  utility processes files ...
 \&.\e\*q .Sh IMPLEMENTATION NOTES  \&.\e\(dq .Sh IMPLEMENTATION NOTES
 \&.\e\*q The next is for sections 2, 3, & 9 only.  \&.\e\(dq Not used in OpenBSD.
 \&.\e\*q .Sh RETURN VALUES  \&.\e\(dq .Sh RETURN VALUES
 \&.\e\*q The next is for sections 1, 6, 7, & 8 only.  \&.\e\(dq For sections 2, 3, & 9 only.
 \&.\e\*q .Sh ENVIRONMENT  \&.\e\(dq .Sh ENVIRONMENT
 \&.\e\*q .Sh FILES  \&.\e\(dq For sections 1, 6, 7, & 8 only.
 \&.\e\*q The next is for sections 1 & 8 only.  \&.\e\(dq .Sh FILES
 \&.\e\*q .Sh EXIT STATUS  \&.\e\(dq .Sh EXIT STATUS
 \&.\e\*q .Sh EXAMPLES  \&.\e\(dq For sections 1, 6, & 8 only.
 \&.\e\*q The next is for sections 1, 4, 6, 7, & 8 only.  \&.\e\(dq .Sh EXAMPLES
 \&.\e\*q .Sh DIAGNOSTICS  \&.\e\(dq .Sh DIAGNOSTICS
 \&.\e\*q The next is for sections 2, 3, & 9 only.  \&.\e\(dq For sections 1, 4, 6, 7, & 8 only.
 \&.\e\*q .Sh ERRORS  \&.\e\(dq .Sh ERRORS
 \&.\e\*q .Sh SEE ALSO  \&.\e\(dq For sections 2, 3, & 9 only.
 \&.\e\*q .Xr foobar 1  \&.\e\(dq .Sh SEE ALSO
 \&.\e\*q .Sh STANDARDS  \&.\e\(dq .Xr foobar 1
 \&.\e\*q .Sh HISTORY  \&.\e\(dq .Sh STANDARDS
 \&.\e\*q .Sh AUTHORS  \&.\e\(dq .Sh HISTORY
 \&.\e\*q .Sh CAVEATS  \&.\e\(dq .Sh AUTHORS
 \&.\e\*q .Sh BUGS  \&.\e\(dq .Sh CAVEATS
 \&.\e\*q .Sh SECURITY CONSIDERATIONS  \&.\e\(dq .Sh BUGS
   \&.\e\(dq .Sh SECURITY CONSIDERATIONS
   \&.\e\(dq Not used in OpenBSD.
 .Ed  .Ed
 .Pp  .Pp
 The sections in a  The sections in an
 .Nm  .Nm
 document are conventionally ordered as they appear above.  document are conventionally ordered as they appear above.
 Sections should be composed as follows:  Sections should be composed as follows:
 .Bl -ohang -offset Ds  .Bl -ohang -offset Ds
 .It Em NAME  .It Em NAME
 The name(s) and a short description of the documented material.  The name(s) and a one line description of the documented material.
 The syntax for this as follows:  The syntax for this as follows:
 .Bd -literal -offset indent  .Bd -literal -offset indent
 \&.Nm name0  \&.Nm name0 ,
 \&.Nm name1  \&.Nm name1 ,
 \&.Nm name2  \&.Nm name2
 \&.Nd a short description  \&.Nd a one line description
 .Ed  .Ed
 .Pp  .Pp
   Multiple
   .Sq \&Nm
   names should be separated by commas.
   .Pp
 The  The
 .Sx \&Nm  .Sx \&Nm
 macro(s) must precede the  macro(s) must precede the
Line 421  configuration.
Line 413  configuration.
 For the first, utilities (sections 1, 6, and 8), this is  For the first, utilities (sections 1, 6, and 8), this is
 generally structured as follows:  generally structured as follows:
 .Bd -literal -offset indent  .Bd -literal -offset indent
 \&.Nm foo  \&.Nm bar
 \&.Op Fl v  \&.Op Fl v
 \&.Op Fl o Ar file  \&.Op Fl o Ar file
 \&.Op Ar  \&.Op Ar
 \&.Nm bar  \&.Nm foo
 \&.Op Fl v  \&.Op Fl v
 \&.Op Fl o Ar file  \&.Op Fl o Ar file
 \&.Op Ar  \&.Op Ar
 .Ed  .Ed
 .Pp  .Pp
   Commands should be ordered alphabetically.
   .Pp
 For the second, function calls (sections 2, 3, 9):  For the second, function calls (sections 2, 3, 9):
 .Bd -literal -offset indent  .Bd -literal -offset indent
 \&.Vt extern const char *global;  
 \&.In header.h  \&.In header.h
   \&.Vt extern const char *global;
 \&.Ft "char *"  \&.Ft "char *"
 \&.Fn foo "const char *src"  \&.Fn foo "const char *src"
 \&.Ft "char *"  \&.Ft "char *"
 \&.Fn bar "const char *src"  \&.Fn bar "const char *src"
 .Ed  .Ed
 .Pp  .Pp
   Ordering of
   .Sx \&In ,
   .Sx \&Vt ,
   .Sx \&Fn ,
   and
   .Sx \&Fo
   macros should follow C header-file conventions.
   .Pp
 And for the third, configurations (section 4):  And for the third, configurations (section 4):
 .Bd -literal -offset indent  .Bd -literal -offset indent
 \&.Cd \*qit* at isa? port 0x2e\*q  \&.Cd \(dqit* at isa? port 0x2e\(dq
 \&.Cd \*qit* at isa? port 0x4e\*q  \&.Cd \(dqit* at isa? port 0x4e\(dq
 .Ed  .Ed
 .Pp  .Pp
 Manuals not in these sections generally don't need a  Manuals not in these sections generally don't need a
 .Em SYNOPSIS .  .Em SYNOPSIS .
 .Pp  .Pp
 See  Some macros are displayed differently in the
 .Sx \&Op ,  .Em SYNOPSIS
   section, particularly
   .Sx \&Nm ,
 .Sx \&Cd ,  .Sx \&Cd ,
   .Sx \&Fd ,
 .Sx \&Fn ,  .Sx \&Fn ,
 .Sx \&Ft ,  .Sx \&Fo ,
   .Sx \&In ,
   .Sx \&Vt ,
 and  and
 .Sx \&Vt .  .Sx \&Ft .
   All of these macros are output on their own line.
   If two such dissimilar macros are pairwise invoked (except for
   .Sx \&Ft
   before
   .Sx \&Fo
   or
   .Sx \&Fn ) ,
   they are separated by a vertical space, unless in the case of
   .Sx \&Fo ,
   .Sx \&Fn ,
   and
   .Sx \&Ft ,
   which are always separated by vertical space.
   .Pp
   When text and macros following an
   .Sx \&Nm
   macro starting an input line span multiple output lines,
   all output lines but the first will be indented to align
   with the text immediately following the
   .Sx \&Nm
   macro, up to the next
   .Sx \&Nm ,
   .Sx \&Sh ,
   or
   .Sx \&Ss
   macro or the end of an enclosing block, whichever comes first.
 .It Em DESCRIPTION  .It Em DESCRIPTION
 This expands upon the brief, one-line description in  This begins with an expansion of the brief, one line description in
 .Em NAME .  .Em NAME :
 It usually contains a break-down of the options (if documenting a  .Bd -literal -offset indent
   The
   \&.Nm
   utility does this, that, and the other.
   .Ed
   .Pp
   It usually follows with a breakdown of the options (if documenting a
 command), such as:  command), such as:
 .Bd -literal -offset indent  .Bd -literal -offset indent
 The arguments are as follows:  The arguments are as follows:
Line 471  Print verbose information.
Line 510  Print verbose information.
 .Ed  .Ed
 .Pp  .Pp
 Manuals not documenting a command won't include the above fragment.  Manuals not documenting a command won't include the above fragment.
   .Pp
   Since the
   .Em DESCRIPTION
   section usually contains most of the text of a manual, longer manuals
   often use the
   .Sx \&Ss
   macro to form subsections.
   In very long manuals, the
   .Em DESCRIPTION
   may be split into multiple sections, each started by an
   .Sx \&Sh
   macro followed by a non-standard section name, and each having
   several subsections, like in the present
   .Nm
   manual.
 .It Em IMPLEMENTATION NOTES  .It Em IMPLEMENTATION NOTES
 Implementation-specific notes should be kept here.  Implementation-specific notes should be kept here.
 This is useful when implementing standard functions that may have side  This is useful when implementing standard functions that may have side
 effects or notable algorithmic implications.  effects or notable algorithmic implications.
 .It Em RETURN VALUES  .It Em RETURN VALUES
 This section is the dual of  This section documents the
 .Em EXIT STATUS ,  return values of functions in sections 2, 3, and 9.
 which is used for commands.  
 It documents the return values of functions in sections 2, 3, and 9.  
 .Pp  .Pp
 See  See
 .Sx \&Rv .  .Sx \&Rv .
 .It Em ENVIRONMENT  .It Em ENVIRONMENT
 Documents any usages of environment variables, e.g.,  Lists the environment variables used by the utility,
 .Xr environ 7 .  and explains the syntax and semantics of their values.
   The
   .Xr environ 7
   manual provides examples of typical content and formatting.
 .Pp  .Pp
 See  See
 .Sx \&Ev .  .Sx \&Ev .
 .It Em FILES  .It Em FILES
 Documents files used.  Documents files used.
 It's helpful to document both the file and a short description of how  It's helpful to document both the file name and a short description of how
 the file is used (created, modified, etc.).  the file is used (created, modified, etc.).
 .Pp  .Pp
 See  See
 .Sx \&Pa .  .Sx \&Pa .
 .It Em EXIT STATUS  .It Em EXIT STATUS
 Command exit status for section 1, 6, and 8 manuals.  This section documents the
 This section is the dual of  command exit status for section 1, 6, and 8 utilities.
 .Em RETURN VALUES ,  
 which is used for functions.  
 Historically, this information was described in  Historically, this information was described in
 .Em DIAGNOSTICS ,  .Em DIAGNOSTICS ,
 a practise that is now discouraged.  a practise that is now discouraged.
Line 510  See
Line 563  See
 .It Em EXAMPLES  .It Em EXAMPLES
 Example usages.  Example usages.
 This often contains snippets of well-formed, well-tested invocations.  This often contains snippets of well-formed, well-tested invocations.
 Make doubly sure that your examples work properly!  Make sure that examples work properly!
 .It Em DIAGNOSTICS  .It Em DIAGNOSTICS
 Documents error conditions.  Documents error conditions.
 This is most useful in section 4 manuals.  This is most useful in section 4 manuals.
Line 533  This section should exist for most manuals.
Line 586  This section should exist for most manuals.
 Cross-references should conventionally be ordered first by section, then  Cross-references should conventionally be ordered first by section, then
 alphabetically.  alphabetically.
 .Pp  .Pp
   References to other documentation concerning the topic of the manual page,
   for example authoritative books or journal articles, may also be
   provided in this section.
   .Pp
 See  See
   .Sx \&Rs
   and
 .Sx \&Xr .  .Sx \&Xr .
 .It Em STANDARDS  .It Em STANDARDS
 References any standards implemented or used.  References any standards implemented or used.
Line 544  section should be used instead.
Line 603  section should be used instead.
 See  See
 .Sx \&St .  .Sx \&St .
 .It Em HISTORY  .It Em HISTORY
 The history of any manual without a  A brief history of the subject, including where it was first implemented,
 .Em STANDARDS  and when it was ported to or reimplemented for the operating system at hand.
 section should be described in this section.  
 .It Em AUTHORS  .It Em AUTHORS
 Credits to authors, if applicable, should appear in this section.  Credits to the person or persons who wrote the code and/or documentation.
 Authors should generally be noted by both name and an e-mail address.  Authors should generally be noted by both name and email address.
 .Pp  .Pp
 See  See
 .Sx \&An .  .Sx \&An .
 .It Em CAVEATS  .It Em CAVEATS
 Explanations of common misuses and misunderstandings should be explained  Common misuses and misunderstandings should be explained
 in this section.  in this section.
 .It Em BUGS  .It Em BUGS
 Extant bugs should be described in this section.  Known bugs, limitations, and work-arounds should be described
   in this section.
 .It Em SECURITY CONSIDERATIONS  .It Em SECURITY CONSIDERATIONS
 Documents any security precautions that operators should consider.  Documents any security precautions that operators should consider.
 .El  .El
 .Sh MACRO SYNTAX  .Sh MACRO SYNTAX
 Macros are one to three three characters in length and begin with a  Macros are one to three three characters in length and begin with a
 control character ,  control character,
 .Sq \&. ,  .Sq \&. ,
 at the beginning of the line.  at the beginning of the line.
 An arbitrary amount of whitespace may sit between the control character  An arbitrary amount of whitespace may sit between the control character
Line 587  closes it out.
Line 646  closes it out.
 .Pp  .Pp
 The  The
 .Em Callable  .Em Callable
 column indicates that the macro may be called subsequent to the initial  column indicates that the macro may also be called by passing its name
 line-macro.  as an argument to another macro.
 If a macro is not callable, then its invocation after the initial line  For example,
 macro is interpreted as opaque text, such that  .Sq \&.Op \&Fl O \&Ar file
   produces
   .Sq Op Fl O Ar file .
   To prevent a macro call and render the macro name literally,
   escape it by prepending a zero-width space,
   .Sq \e& .
   For example,
   .Sq \&Op \e&Fl O
   produces
   .Sq Op \&Fl O .
   If a macro is not callable but its name appears as an argument
   to another macro, it is interpreted as opaque text.
   For example,
 .Sq \&.Fl \&Sh  .Sq \&.Fl \&Sh
 produces  produces
 .Sq Fl \&Sh .  .Sq Fl \&Sh .
 .Pp  .Pp
 The  The
 .Em Parsable  .Em Parsed
 column indicates whether the macro may be followed by further  column indicates whether the macro may call other macros by receiving
 (ostensibly callable) macros.  their names as arguments.
 If a macro is not parsable, subsequent macro invocations on the line  If a macro is not parsed but the name of another macro appears
 will be interpreted as opaque text.  as an argument, it is interpreted as opaque text.
 .Pp  .Pp
 The  The
 .Em Scope  .Em Scope
Line 609  column, if applicable, describes closure rules.
Line 680  column, if applicable, describes closure rules.
 Multi-line scope closed by an explicit closing macro.  Multi-line scope closed by an explicit closing macro.
 All macros contains bodies; only  All macros contains bodies; only
 .Sx \&Bf  .Sx \&Bf
 contains a head.  and
   .Pq optionally
   .Sx \&Bl
   contain a head.
 .Bd -literal -offset indent  .Bd -literal -offset indent
 \&.Yo \(lB\-arg \(lBparm...\(rB\(rB \(lBhead...\(rB  \&.Yo \(lB\-arg \(lBparm...\(rB\(rB \(lBhead...\(rB
 \(lBbody...\(rB  \(lBbody...\(rB
 \&.Yc  \&.Yc
 .Ed  .Ed
 .Pp  .Bl -column "MacroX" "CallableX" "ParsedX" "closed by XXX" -offset indent
 .Bl -column -compact -offset indent "MacroX" "CallableX" "ParsableX" "closed by XXX"  .It Em Macro Ta Em Callable Ta Em Parsed Ta Em Scope
 .It Em Macro Ta Em Callable Ta Em Parsable Ta Em Scope  
 .It Sx \&Bd  Ta    \&No     Ta    \&No     Ta    closed by Sx \&Ed  .It Sx \&Bd  Ta    \&No     Ta    \&No     Ta    closed by Sx \&Ed
 .It Sx \&Bf  Ta    \&No     Ta    \&No     Ta    closed by Sx \&Ef  .It Sx \&Bf  Ta    \&No     Ta    \&No     Ta    closed by Sx \&Ef
 .It Sx \&Bk  Ta    \&No     Ta    \&No     Ta    closed by Sx \&Ek  .It Sx \&Bk  Ta    \&No     Ta    \&No     Ta    closed by Sx \&Ek
Line 639  All macros have bodies; some
Line 712  All macros have bodies; some
 .Pc  .Pc
 don't have heads; only one  don't have heads; only one
 .Po  .Po
 .Sx \&It Fl column  .Sx \&It
   in
   .Sx \&Bl Fl column
 .Pc  .Pc
 has multiple heads.  has multiple heads.
 .Bd -literal -offset indent  .Bd -literal -offset indent
 \&.Yo \(lB\-arg \(lBparm...\(rB\(rB \(lBhead... \(lBTa head...\(rB\(rB  \&.Yo \(lB\-arg \(lBparm...\(rB\(rB \(lBhead... \(lBTa head...\(rB\(rB
 \(lBbody...\(rB  \(lBbody...\(rB
 .Ed  .Ed
 .Pp  .Bl -column "MacroX" "CallableX" "ParsedX" "closed by XXXXXXXXXXX" -offset indent
 .Bl -column -compact -offset indent "MacroX" "CallableX" "ParsableX" "closed by XXXXXXXXXXX"  .It Em Macro Ta Em Callable Ta Em Parsed Ta Em Scope
 .It Em Macro Ta Em Callable Ta Em Parsable Ta Em Scope  .It Sx \&It Ta \&No Ta Yes  Ta closed by Sx \&It , Sx \&El
 .It Sx \&It  Ta    \&No     Ta    Yes      Ta    closed by Sx \&It , Sx \&El  .It Sx \&Nd Ta \&No Ta \&No Ta closed by Sx \&Sh
 .It Sx \&Nd  Ta    \&No     Ta    \&No     Ta    closed by Sx \&Sh  .It Sx \&Nm Ta \&No Ta Yes  Ta closed by Sx \&Nm , Sx \&Sh , Sx \&Ss
 .It Sx \&Sh  Ta    \&No     Ta    \&No     Ta    closed by Sx \&Sh  .It Sx \&Sh Ta \&No Ta Yes  Ta closed by Sx \&Sh
 .It Sx \&Ss  Ta    \&No     Ta    \&No     Ta    closed by Sx \&Sh , Sx \&Ss  .It Sx \&Ss Ta \&No Ta Yes  Ta closed by Sx \&Sh , Sx \&Ss
 .El  .El
   .Pp
   Note that the
   .Sx \&Nm
   macro is a
   .Sx Block full-implicit
   macro only when invoked as the first macro
   in a
   .Em SYNOPSIS
   section line, else it is
   .Sx In-line .
 .Ss Block partial-explicit  .Ss Block partial-explicit
 Like block full-explicit, but also with single-line scope.  Like block full-explicit, but also with single-line scope.
 Each has at least a body and, in limited circumstances, a head  Each has at least a body and, in limited circumstances, a head
Line 671  and/or tail
Line 756  and/or tail
 \&.Yo \(lB\-arg \(lBparm...\(rB\(rB \(lBhead...\(rB \  \&.Yo \(lB\-arg \(lBparm...\(rB\(rB \(lBhead...\(rB \
 \(lBbody...\(rB \&Yc \(lBtail...\(rB  \(lBbody...\(rB \&Yc \(lBtail...\(rB
 .Ed  .Ed
 .Pp  .Bl -column "MacroX" "CallableX" "ParsedX" "closed by XXXX" -offset indent
 .Bl -column "MacroX" "CallableX" "ParsableX" "closed by XXXX" -compact -offset indent  .It Em Macro Ta Em Callable Ta Em Parsed Ta Em Scope
 .It Em Macro Ta Em Callable Ta Em Parsable Ta Em Scope  
 .It Sx \&Ac  Ta    Yes      Ta    Yes      Ta    opened by Sx \&Ao  .It Sx \&Ac  Ta    Yes      Ta    Yes      Ta    opened by Sx \&Ao
 .It Sx \&Ao  Ta    Yes      Ta    Yes      Ta    closed by Sx \&Ac  .It Sx \&Ao  Ta    Yes      Ta    Yes      Ta    closed by Sx \&Ac
 .It Sx \&Bc  Ta    Yes      Ta    Yes      Ta    closed by Sx \&Bo  .It Sx \&Bc  Ta    Yes      Ta    Yes      Ta    closed by Sx \&Bo
Line 700  and/or tail
Line 784  and/or tail
 .It Sx \&Xo  Ta    Yes      Ta    Yes      Ta    closed by Sx \&Xc  .It Sx \&Xo  Ta    Yes      Ta    Yes      Ta    closed by Sx \&Xc
 .El  .El
 .Ss Block partial-implicit  .Ss Block partial-implicit
 Like block full-implicit, but with single-line scope closed by  Like block full-implicit, but with single-line scope closed by the
 .Sx Reserved Characters  end of the line.
 or end of line.  
 .Bd -literal -offset indent  .Bd -literal -offset indent
 \&.Yo \(lB\-arg \(lBval...\(rB\(rB \(lBbody...\(rB \(lBres...\(rB  \&.Yo \(lB\-arg \(lBval...\(rB\(rB \(lBbody...\(rB \(lBres...\(rB
 .Ed  .Ed
 .Pp  .Bl -column "MacroX" "CallableX" "ParsedX" -offset indent
 .Bl -column "MacroX" "CallableX" "ParsableX" -compact -offset indent  .It Em Macro Ta Em Callable Ta Em Parsed
 .It Em Macro Ta Em Callable Ta Em Parsable  
 .It Sx \&Aq  Ta    Yes      Ta    Yes  .It Sx \&Aq  Ta    Yes      Ta    Yes
 .It Sx \&Bq  Ta    Yes      Ta    Yes  .It Sx \&Bq  Ta    Yes      Ta    Yes
 .It Sx \&Brq Ta    Yes      Ta    Yes  .It Sx \&Brq Ta    Yes      Ta    Yes
Line 732  in a
Line 814  in a
 .Em SYNOPSIS  .Em SYNOPSIS
 section line, else it is  section line, else it is
 .Sx In-line .  .Sx In-line .
   .Ss Special block macro
   The
   .Sx \&Ta
   macro can only be used below
   .Sx \&It
   in
   .Sx \&Bl Fl column
   lists.
   It delimits blocks representing table cells;
   these blocks have bodies, but no heads.
   .Bl -column "MacroX" "CallableX" "ParsedX" "closed by XXXX" -offset indent
   .It Em Macro Ta Em Callable Ta Em Parsed Ta Em Scope
   .It Sx \&Ta  Ta    Yes      Ta    Yes    Ta closed by Sx \&Ta , Sx \&It
   .El
 .Ss In-line  .Ss In-line
 Closed by  Closed by the end of the line, fixed argument lengths,
 .Sx Reserved Characters ,  and/or subsequent macros.
 end of line, fixed argument lengths, and/or subsequent macros.  
 In-line macros have only text children.  In-line macros have only text children.
 If a number (or inequality) of arguments is  If a number (or inequality) of arguments is
 .Pq n ,  .Pq n ,
 then the macro accepts an arbitrary number of arguments.  then the macro accepts an arbitrary number of arguments.
 .Bd -literal -offset indent  .Bd -literal -offset indent
 \&.Yo \(lB\-arg \(lBval...\(rB\(rB \(lBargs...\(rB \(lbres...\(rb  \&.Yo \(lB\-arg \(lBval...\(rB\(rB \(lBargs...\(rB \(lBres...\(rB
   
 \&.Yo \(lB\-arg \(lBval...\(rB\(rB \(lBargs...\(rB Yc...  \&.Yo \(lB\-arg \(lBval...\(rB\(rB \(lBargs...\(rB Yc...
   
 \&.Yo \(lB\-arg \(lBval...\(rB\(rB arg0 arg1 argN  \&.Yo \(lB\-arg \(lBval...\(rB\(rB arg0 arg1 argN
 .Ed  .Ed
 .Pp  .Bl -column "MacroX" "CallableX" "ParsedX" "Arguments" -offset indent
 .Bl -column "MacroX" "CallableX" "ParsableX" "Arguments" -compact -offset indent  .It Em Macro Ta Em Callable Ta Em Parsed Ta Em Arguments
 .It Em Macro Ta Em Callable Ta Em Parsable Ta Em Arguments  
 .It Sx \&%A  Ta    \&No     Ta    \&No     Ta    >0  .It Sx \&%A  Ta    \&No     Ta    \&No     Ta    >0
 .It Sx \&%B  Ta    \&No     Ta    \&No     Ta    >0  .It Sx \&%B  Ta    \&No     Ta    \&No     Ta    >0
 .It Sx \&%C  Ta    \&No     Ta    \&No     Ta    >0  .It Sx \&%C  Ta    \&No     Ta    \&No     Ta    >0
Line 764  then the macro accepts an arbitrary number of argument
Line 858  then the macro accepts an arbitrary number of argument
 .It Sx \&%T  Ta    \&No     Ta    \&No     Ta    >0  .It Sx \&%T  Ta    \&No     Ta    \&No     Ta    >0
 .It Sx \&%U  Ta    \&No     Ta    \&No     Ta    >0  .It Sx \&%U  Ta    \&No     Ta    \&No     Ta    >0
 .It Sx \&%V  Ta    \&No     Ta    \&No     Ta    >0  .It Sx \&%V  Ta    \&No     Ta    \&No     Ta    >0
 .It Sx \&Ad  Ta    Yes      Ta    Yes      Ta    n  .It Sx \&Ad  Ta    Yes      Ta    Yes      Ta    >0
 .It Sx \&An  Ta    Yes      Ta    Yes      Ta    n  .It Sx \&An  Ta    Yes      Ta    Yes      Ta    >0
 .It Sx \&Ap  Ta    Yes      Ta    Yes      Ta    0  .It Sx \&Ap  Ta    Yes      Ta    Yes      Ta    0
 .It Sx \&Ar  Ta    Yes      Ta    Yes      Ta    n  .It Sx \&Ar  Ta    Yes      Ta    Yes      Ta    n
 .It Sx \&At  Ta    Yes      Ta    Yes      Ta    1  .It Sx \&At  Ta    Yes      Ta    Yes      Ta    1
Line 773  then the macro accepts an arbitrary number of argument
Line 867  then the macro accepts an arbitrary number of argument
 .It Sx \&Bt  Ta    \&No     Ta    \&No     Ta    0  .It Sx \&Bt  Ta    \&No     Ta    \&No     Ta    0
 .It Sx \&Bx  Ta    Yes      Ta    Yes      Ta    n  .It Sx \&Bx  Ta    Yes      Ta    Yes      Ta    n
 .It Sx \&Cd  Ta    Yes      Ta    Yes      Ta    >0  .It Sx \&Cd  Ta    Yes      Ta    Yes      Ta    >0
 .It Sx \&Cm  Ta    Yes      Ta    Yes      Ta    n  .It Sx \&Cm  Ta    Yes      Ta    Yes      Ta    >0
 .It Sx \&Db  Ta    \&No     Ta    \&No     Ta    1  .It Sx \&Db  Ta    \&No     Ta    \&No     Ta    1
 .It Sx \&Dd  Ta    \&No     Ta    \&No     Ta    >0  .It Sx \&Dd  Ta    \&No     Ta    \&No     Ta    n
 .It Sx \&Dt  Ta    \&No     Ta    \&No     Ta    n  .It Sx \&Dt  Ta    \&No     Ta    \&No     Ta    n
 .It Sx \&Dv  Ta    Yes      Ta    Yes      Ta    n  .It Sx \&Dv  Ta    Yes      Ta    Yes      Ta    >0
 .It Sx \&Dx  Ta    Yes      Ta    Yes      Ta    n  .It Sx \&Dx  Ta    Yes      Ta    Yes      Ta    n
 .It Sx \&Em  Ta    Yes      Ta    Yes      Ta    >0  .It Sx \&Em  Ta    Yes      Ta    Yes      Ta    >0
 .It Sx \&En  Ta    \&No     Ta    \&No     Ta    0  .It Sx \&En  Ta    \&No     Ta    \&No     Ta    0
 .It Sx \&Er  Ta    Yes      Ta    Yes      Ta    >0  .It Sx \&Er  Ta    Yes      Ta    Yes      Ta    >0
 .It Sx \&Es  Ta    \&No     Ta    \&No     Ta    0  .It Sx \&Es  Ta    \&No     Ta    \&No     Ta    0
 .It Sx \&Ev  Ta    Yes      Ta    Yes      Ta    n  .It Sx \&Ev  Ta    Yes      Ta    Yes      Ta    >0
 .It Sx \&Ex  Ta    \&No     Ta    \&No     Ta    n  .It Sx \&Ex  Ta    \&No     Ta    \&No     Ta    n
 .It Sx \&Fa  Ta    Yes      Ta    Yes      Ta    n  .It Sx \&Fa  Ta    Yes      Ta    Yes      Ta    >0
 .It Sx \&Fd  Ta    \&No     Ta    \&No     Ta    >0  .It Sx \&Fd  Ta    \&No     Ta    \&No     Ta    >0
 .It Sx \&Fl  Ta    Yes      Ta    Yes      Ta    n  .It Sx \&Fl  Ta    Yes      Ta    Yes      Ta    n
 .It Sx \&Fn  Ta    Yes      Ta    Yes      Ta    >0  .It Sx \&Fn  Ta    Yes      Ta    Yes      Ta    >0
 .It Sx \&Fr  Ta    \&No     Ta    \&No     Ta    n  .It Sx \&Fr  Ta    \&No     Ta    \&No     Ta    n
 .It Sx \&Ft  Ta    Yes      Ta    Yes      Ta    n  .It Sx \&Ft  Ta    Yes      Ta    Yes      Ta    >0
 .It Sx \&Fx  Ta    Yes      Ta    Yes      Ta    n  .It Sx \&Fx  Ta    Yes      Ta    Yes      Ta    n
 .It Sx \&Hf  Ta    \&No     Ta    \&No     Ta    n  .It Sx \&Hf  Ta    \&No     Ta    \&No     Ta    n
 .It Sx \&Ic  Ta    Yes      Ta    Yes      Ta    >0  .It Sx \&Ic  Ta    Yes      Ta    Yes      Ta    >0
 .It Sx \&In  Ta    \&No     Ta    \&No     Ta    n  .It Sx \&In  Ta    \&No     Ta    \&No     Ta    1
 .It Sx \&Lb  Ta    \&No     Ta    \&No     Ta    1  .It Sx \&Lb  Ta    \&No     Ta    \&No     Ta    1
 .It Sx \&Li  Ta    Yes      Ta    Yes      Ta    n  .It Sx \&Li  Ta    Yes      Ta    Yes      Ta    >0
 .It Sx \&Lk  Ta    Yes      Ta    Yes      Ta    n  .It Sx \&Lk  Ta    Yes      Ta    Yes      Ta    >0
 .It Sx \&Lp  Ta    \&No     Ta    \&No     Ta    0  .It Sx \&Lp  Ta    \&No     Ta    \&No     Ta    0
 .It Sx \&Ms  Ta    Yes      Ta    Yes      Ta    >0  .It Sx \&Ms  Ta    Yes      Ta    Yes      Ta    >0
 .It Sx \&Mt  Ta    Yes      Ta    Yes      Ta    >0  .It Sx \&Mt  Ta    Yes      Ta    Yes      Ta    >0
Line 825  then the macro accepts an arbitrary number of argument
Line 919  then the macro accepts an arbitrary number of argument
 .It Sx \&br  Ta    \&No     Ta    \&No     Ta    0  .It Sx \&br  Ta    \&No     Ta    \&No     Ta    0
 .It Sx \&sp  Ta    \&No     Ta    \&No     Ta    1  .It Sx \&sp  Ta    \&No     Ta    \&No     Ta    1
 .El  .El
   .Ss Delimiters
   When a macro argument consists of one single input character
   considered as a delimiter, the argument gets special handling.
   This does not apply when delimiters appear in arguments containing
   more than one character.
   Consequently, to prevent special handling and just handle it
   like any other argument, a delimiter can be escaped by prepending
   a zero-width space
   .Pq Sq \e& .
   In text lines, delimiters never need escaping, but may be used
   as normal punctuation.
   .Pp
   For many macros, when the leading arguments are opening delimiters,
   these delimiters are put before the macro scope,
   and when the trailing arguments are closing delimiters,
   these delimiters are put after the macro scope.
   For example,
   .Pp
   .D1 Pf \. \&Aq "( [ word ] ) ."
   .Pp
   renders as:
   .Pp
   .D1 Aq ( [ word ] ) .
   .Pp
   Opening delimiters are:
   .Pp
   .Bl -tag -width Ds -offset indent -compact
   .It \&(
   left parenthesis
   .It \&[
   left bracket
   .El
   .Pp
   Closing delimiters are:
   .Pp
   .Bl -tag -width Ds -offset indent -compact
   .It \&.
   period
   .It \&,
   comma
   .It \&:
   colon
   .It \&;
   semicolon
   .It \&)
   right parenthesis
   .It \&]
   right bracket
   .It \&?
   question mark
   .It \&!
   exclamation mark
   .El
   .Pp
   Note that even a period preceded by a backslash
   .Pq Sq \e.\&
   gets this special handling; use
   .Sq \e&.
   to prevent that.
   .Pp
   Many in-line macros interrupt their scope when they encounter
   delimiters, and resume their scope when more arguments follow that
   are not delimiters.
   For example,
   .Pp
   .D1 Pf \. \&Fl "a ( b | c \e*(Ba d ) e"
   .Pp
   renders as:
   .Pp
   .D1 Fl a ( b | c \*(Ba d ) e
   .Pp
   This applies to both opening and closing delimiters,
   and also to the middle delimiter:
   .Pp
   .Bl -tag -width Ds -offset indent -compact
   .It \&|
   vertical bar
   .El
   .Pp
   As a special case, the predefined string \e*(Ba is handled and rendered
   in the same way as a plain
   .Sq \&|
   character.
   Using this predefined string is not recommended in new manuals.
   .Sh MACRO OVERVIEW
   This overview is sorted such that macros of similar purpose are listed
   together, to help find the best macro for any given purpose.
   Deprecated macros are not included in the overview, but can be found
   in the alphabetical reference below.
   .Ss Document preamble and NAME section macros
   .Bl -column "Brq, Bro, Brc" description
   .It Sx \&Dd Ta document date: Cm $Mdocdate$ | Ar month day , year
   .It Sx \&Dt Ta document title: Ar TITLE section Op Ar volume | arch
   .It Sx \&Os Ta operating system version: Op Ar system Op Ar version
   .It Sx \&Nm Ta document name (one argument)
   .It Sx \&Nd Ta document description (one line)
   .El
   .Ss Sections and cross references
   .Bl -column "Brq, Bro, Brc" description
   .It Sx \&Sh Ta section header (one line)
   .It Sx \&Ss Ta subsection header (one line)
   .It Sx \&Sx Ta internal cross reference to a section or subsection
   .It Sx \&Xr Ta cross reference to another manual page: Ar name section
   .It Sx \&Pp , \&Lp Ta start a text paragraph (no arguments)
   .El
   .Ss Displays and lists
   .Bl -column "Brq, Bro, Brc" description
   .It Sx \&Bd , \&Ed Ta display block:
   .Fl Ar type
   .Op Fl offset Ar width
   .Op Fl compact
   .It Sx \&D1 Ta indented display (one line)
   .It Sx \&Dl Ta indented literal display (one line)
   .It Sx \&Bl , \&El Ta list block:
   .Fl Ar type
   .Op Fl width Ar val
   .Op Fl offset Ar val
   .Op Fl compact
   .It Sx \&It Ta list item (syntax depends on Fl Ar type )
   .It Sx \&Ta Ta table cell separator in Sx Bl Fl column No lists
   .It Sx \&Rs , \&%* , \&Re Ta bibliographic block (references)
   .El
   .Ss Spacing control
   .Bl -column "Brq, Bro, Brc" description
   .It Sx \&Pf Ta prefix, no following horizontal space (one argument)
   .It Sx \&Ns Ta roman font, no preceding horizontal space (no arguments)
   .It Sx \&Ap Ta apostrophe without surrounding whitespace (no arguments)
   .It Sx \&Sm Ta switch horizontal spacing mode: Cm on | off
   .It Sx \&Bk , \&Ek Ta keep block: Fl words
   .It Sx \&br Ta force output line break in text mode (no arguments)
   .It Sx \&sp Ta force vertical space: Op Ar height
   .El
   .Ss Semantic markup for command line utilities:
   .Bl -column "Brq, Bro, Brc" description
   .It Sx \&Nm Ta start a SYNOPSIS block with the name of a utility
   .It Sx \&Fl Ta command line options (flags) (>=0 arguments)
   .It Sx \&Cm Ta command modifier (>0 arguments)
   .It Sx \&Ar Ta command arguments (>=0 arguments)
   .It Sx \&Op , \&Oo , \&Oc Ta optional syntax elements (enclosure)
   .It Sx \&Ic Ta internal or interactive command (>0 arguments)
   .It Sx \&Ev Ta environmental variable (>0 arguments)
   .It Sx \&Pa Ta file system path (>=0 arguments)
   .El
   .Ss Semantic markup for function libraries:
   .Bl -column "Brq, Bro, Brc" description
   .It Sx \&Lb Ta function library (one argument)
   .It Sx \&In Ta include file (one argument)
   .It Sx \&Ft Ta function type (>0 arguments)
   .It Sx \&Fo , \&Fc Ta function block: Ar funcname
   .It Sx \&Fn Ta function name:
   .Op Ar functype
   .Ar funcname
   .Oo
   .Op Ar argtype
   .Ar argname
   .Oc
   .It Sx \&Fa Ta function argument (>0 arguments)
   .It Sx \&Vt Ta variable type (>0 arguments)
   .It Sx \&Va Ta variable name (>0 arguments)
   .It Sx \&Dv Ta defined variable or preprocessor constant (>0 arguments)
   .It Sx \&Er Ta error constant (>0 arguments)
   .It Sx \&Ev Ta environmental variable (>0 arguments)
   .El
   .Ss Various semantic markup:
   .Bl -column "Brq, Bro, Brc" description
   .It Sx \&An Ta author name (>0 arguments)
   .It Sx \&Lk Ta hyperlink: Ar uri Op Ar name
   .It Sx \&Mt Ta Do mailto Dc hyperlink: Ar address
   .It Sx \&Cd Ta kernel configuration declaration (>0 arguments)
   .It Sx \&Ad Ta memory address (>0 arguments)
   .It Sx \&Ms Ta mathematical symbol (>0 arguments)
   .It Sx \&Tn Ta tradename (>0 arguments)
   .El
   .Ss Physical markup
   .Bl -column "Brq, Bro, Brc" description
   .It Sx \&Em Ta italic font or underline (emphasis) (>0 arguments)
   .It Sx \&Sy Ta boldface font (symbolic) (>0 arguments)
   .It Sx \&Li Ta typewriter font (literal) (>0 arguments)
   .It Sx \&No Ta return to roman font (normal) (no arguments)
   .It Sx \&Bf , \&Ef Ta font block:
   .Op Fl Ar type | Cm \&Em | \&Li | \&Sy
   .El
   .Ss Physical enclosures
   .Bl -column "Brq, Bro, Brc" description
   .It Sx \&Dq , \&Do , \&Dc Ta enclose in typographic double quotes: Dq text
   .It Sx \&Qq , \&Qo , \&Qc Ta enclose in typewriter double quotes: Qq text
   .It Sx \&Sq , \&So , \&Sc Ta enclose in single quotes: Sq text
   .It Sx \&Ql Ta single-quoted literal text: Ql text
   .It Sx \&Pq , \&Po , \&Pc Ta enclose in parentheses: Pq text
   .It Sx \&Bq , \&Bo , \&Bc Ta enclose in square brackets: Bq text
   .It Sx \&Brq , \&Bro , \&Brc Ta enclose in curly braces: Brq text
   .It Sx \&Aq , \&Ao , \&Ac Ta enclose in angle brackets: Aq text
   .It Sx \&Eo , \&Ec Ta generic enclosure
   .El
   .Ss Text production
   .Bl -column "Brq, Bro, Brc" description
   .It Sx \&Ex Fl std Ta standard command exit values: Op Ar utility ...
   .It Sx \&Rv Fl std Ta standard function return values: Op Ar function ...
   .It Sx \&St Ta reference to a standards document (one argument)
   .It Sx \&Ux Ta Ux
   .It Sx \&At Ta At
   .It Sx \&Bx Ta Bx
   .It Sx \&Bsx Ta Bsx
   .It Sx \&Nx Ta Nx
   .It Sx \&Fx Ta Fx
   .It Sx \&Ox Ta Ox
   .It Sx \&Dx Ta Dx
   .El
 .Sh REFERENCE  .Sh REFERENCE
 This section is a canonical reference of all macros, arranged  This section is a canonical reference of all macros, arranged
 alphabetically.  alphabetically.
Line 833  For the scoping of individual macros, see
Line 1135  For the scoping of individual macros, see
 .Ss \&%A  .Ss \&%A
 Author name of an  Author name of an
 .Sx \&Rs  .Sx \&Rs
 block.  Multiple authors should each be accorded their own  block.
   Multiple authors should each be accorded their own
 .Sx \%%A  .Sx \%%A
 line.  Author names should be ordered with full or abbreviated  line.
 forename(s) first, then full surname.  Author names should be ordered with full or abbreviated forename(s)
   first, then full surname.
 .Ss \&%B  .Ss \&%B
 Book title of an  Book title of an
 .Sx \&Rs  .Sx \&Rs
 block.  This macro may also be used in a non-bibliographic context when  block.
   This macro may also be used in a non-bibliographic context when
 referring to book titles.  referring to book titles.
 .Ss \&%C  .Ss \&%C
 Publication city or location of an  Publication city or location of an
 .Sx \&Rs  .Sx \&Rs
 block.  block.
 .Pp  
 .Em Remarks :  
 this macro is not implemented in  
 .Xr groff 1 .  
 .Ss \&%D  .Ss \&%D
 Publication date of an  Publication date of an
 .Sx \&Rs  .Sx \&Rs
 block.  This should follow the reduced or canonical form syntax  block.
 described in  Recommended formats of arguments are
 .Sx Dates .  .Ar month day , year
   or just
   .Ar year .
 .Ss \&%I  .Ss \&%I
 Publisher or issuer name of an  Publisher or issuer name of an
 .Sx \&Rs  .Sx \&Rs
Line 879  block.
Line 1182  block.
 .Ss \&%Q  .Ss \&%Q
 Institutional author (school, government, etc.) of an  Institutional author (school, government, etc.) of an
 .Sx \&Rs  .Sx \&Rs
 block.  Multiple institutional authors should each be accorded their own  block.
   Multiple institutional authors should each be accorded their own
 .Sx \&%Q  .Sx \&%Q
 line.  line.
 .Ss \&%R  .Ss \&%R
Line 889  block.
Line 1193  block.
 .Ss \&%T  .Ss \&%T
 Article title of an  Article title of an
 .Sx \&Rs  .Sx \&Rs
 block.  This macro may also be used in a non-bibliographical context  block.
 when referring to article titles.  This macro may also be used in a non-bibliographical context when
   referring to article titles.
 .Ss \&%U  .Ss \&%U
 URI of reference document.  URI of reference document.
 .Ss \&%V  .Ss \&%V
Line 898  Volume number of an
Line 1203  Volume number of an
 .Sx \&Rs  .Sx \&Rs
 block.  block.
 .Ss \&Ac  .Ss \&Ac
 Closes an  Close an
 .Sx \&Ao  .Sx \&Ao
 block.  Does not have any tail arguments.  block.
   Does not have any tail arguments.
 .Ss \&Ad  .Ss \&Ad
 Address construct: usually in the context of an computational address in  Memory address.
 memory, not a physical (post) address.  Do not use this for postal addresses.
 .Pp  .Pp
 Examples:  Examples:
 .D1 \&.Ad [0,$]  .Dl \&.Ad [0,$]
 .D1 \&.Ad 0x00000000  .Dl \&.Ad 0x00000000
 .Ss \&An  .Ss \&An
 Author name.  Author name.
 This macro may alternatively accepts the following arguments, although  Can be used both for the authors of the program, function, or driver
 these may not be specified along with a parameter:  documented in the manual, or for the authors of the manual itself.
 .Bl -tag -width 12n -offset indent  Requires either the name of an author or one of the following arguments:
   .Pp
   .Bl -tag -width "-nosplitX" -offset indent -compact
 .It Fl split  .It Fl split
 Renders a line break before each author listing.  Start a new output line before each subsequent invocation of
   .Sx \&An .
 .It Fl nosplit  .It Fl nosplit
 The opposite of  The opposite of
 .Fl split .  .Fl split .
 .El  .El
 .Pp  .Pp
 In the AUTHORS section, the default is not to split the first author  The default is
 listing, but all subsequent author listings, whether or not they're  .Fl nosplit .
 interspersed by other macros or text, are split.  The effect of selecting either of the
 Thus, specifying  
 .Fl split  .Fl split
 will cause the first listing also to be split.  modes ends at the beginning of the
 If not in the AUTHORS section, the default is not to split.  .Em AUTHORS
   section.
   In the
   .Em AUTHORS
   section, the default is
   .Fl nosplit
   for the first author listing and
   .Fl split
   for all other author listings.
 .Pp  .Pp
 Examples:  Examples:
 .D1 \&.An -nosplit  .Dl \&.An -nosplit
 .D1 \&.An J. D. Ullman .  .Dl \&.An Kristaps Dzonsons \&Aq kristaps@bsd.lv
 .Pp  
 .Em Remarks :  
 the effects of  
 .Fl split  
 or  
 .Fl nosplit  
 are re-set when entering the AUTHORS section, so if one specifies  
 .Sx \&An Fl nosplit  
 in the general document body, it must be re-specified in the AUTHORS  
 section.  
 .Ss \&Ao  .Ss \&Ao
 Begins a block enclosed by angled brackets.  Begin a block enclosed by angle brackets.
 Does not have any head arguments.  Does not have any head arguments.
 .Pp  .Pp
 Examples:  Examples:
 .D1 \&.Fl -key= \&Ns \&Ao \&Ar val \&Ac  .Dl \&.Fl -key= \&Ns \&Ao \&Ar val \&Ac
 .Pp  .Pp
 See also  See also
 .Sx \&Aq .  .Sx \&Aq .
 .Ss \&Ap  .Ss \&Ap
 Inserts an apostrophe without any surrounding white-space.  Inserts an apostrophe without any surrounding whitespace.
 This is generally used as a grammatic device when referring to the verb  This is generally used as a grammatical device when referring to the verb
 form of a function:  form of a function.
 .Bd -literal -offset indent  .Pp
 \&.Fn execve Ap d  Examples:
 .Ed  .Dl \&.Fn execve \&Ap d
 .Ss \&Aq  .Ss \&Aq
 Encloses its arguments in angled brackets.  Encloses its arguments in angle brackets.
 .Pp  .Pp
 Examples:  Examples:
 .D1 \&.Fl -key= \&Ns \&Aq \&Ar val  .Dl \&.Fl -key= \&Ns \&Aq \&Ar val
 .Pp  .Pp
 .Em Remarks :  .Em Remarks :
 this macro is often abused for rendering URIs, which should instead use  this macro is often abused for rendering URIs, which should instead use
Line 978  See also
Line 1284  See also
 .Ss \&Ar  .Ss \&Ar
 Command arguments.  Command arguments.
 If an argument is not provided, the string  If an argument is not provided, the string
 .Dq file ...  .Dq file ...\&
 is used as a default.  is used as a default.
 .Pp  .Pp
 Examples:  Examples:
 .D1 \&.Fl o \&Ns \&Ar file1  .Dl ".Fl o Ar file"
 .D1 \&.Ar  .Dl ".Ar"
 .D1 \&.Ar arg1 , arg2 .  .Dl ".Ar arg1 , arg2 ."
   .Pp
   The arguments to the
   .Sx \&Ar
   macro are names and placeholders for command arguments;
   for fixed strings to be passed verbatim as arguments, use
   .Sx \&Fl
   or
   .Sx \&Cm .
 .Ss \&At  .Ss \&At
 Formats an AT&T version.  Formats an AT&T version.
 Accepts at most one parameter:  Accepts one optional argument:
 .Bl -tag -width 12n -offset indent  .Pp
   .Bl -tag -width "v[1-7] | 32vX" -offset indent -compact
 .It Cm v[1-7] | 32v  .It Cm v[1-7] | 32v
 A version of  A version of
 .At .  .At .
   .It Cm III
   .At III .
 .It Cm V[.[1-4]]?  .It Cm V[.[1-4]]?
 A system version of  A version of
 .At .  .At V .
 .El  .El
 .Pp  .Pp
 Note that these parameters do not begin with a hyphen.  Note that these arguments do not begin with a hyphen.
 .Pp  .Pp
 Examples:  Examples:
 .D1 \&.At  .Dl \&.At
 .D1 \&.At V.1  .Dl \&.At III
   .Dl \&.At V.1
 .Pp  .Pp
 See also  See also
 .Sx \&Bsx ,  .Sx \&Bsx ,
Line 1013  See also
Line 1331  See also
 and  and
 .Sx \&Ux .  .Sx \&Ux .
 .Ss \&Bc  .Ss \&Bc
 Closes a  Close a
 .Sx \&Bo  .Sx \&Bo
 block.  Does not have any tail arguments.  block.
   Does not have any tail arguments.
 .Ss \&Bd  .Ss \&Bd
 Begins a display block.  Begin a display block.
 A display is collection of macros or text which may be collectively  Its syntax is as follows:
 offset or justified in a manner different from that  .Bd -ragged -offset indent
 of the enclosing context.  .Pf \. Sx \&Bd
 By default, the block is preceded by a vertical space.  .Fl Ns Ar type
   .Op Fl offset Ar width
   .Op Fl compact
   .Ed
 .Pp  .Pp
 Each display is associated with a type, which must be one of the  Display blocks are used to select a different indentation and
 following arguments:  justification than the one used by the surrounding text.
 .Bl -tag -width 12n -offset indent  They may contain both macro lines and text lines.
 .It Fl ragged  By default, a display block is preceded by a vertical space.
 Only left-justify the block.  .Pp
 .It Fl unfilled  The
 Do not justify the block at all.  .Ar type
   must be one of the following:
   .Bl -tag -width 13n -offset indent
   .It Fl centered
   Produce one output line from each input line, and centre-justify each line.
   Using this display type is not recommended; many
   .Nm
   implementations render it poorly.
 .It Fl filled  .It Fl filled
 Left- and right-justify the block.  Change the positions of line breaks to fill each line, and left- and
   right-justify the resulting block.
 .It Fl literal  .It Fl literal
 Alias for  Produce one output line from each input line,
 .Fl unfilled .  and do not justify the block at all.
 .It Fl centered  Preserve white space as it appears in the input.
 Centre-justify each line.  Always use a constant-width font.
   Use this for displaying source code.
   .It Fl ragged
   Change the positions of line breaks to fill each line, and left-justify
   the resulting block.
   .It Fl unfilled
   The same as
   .Fl literal ,
   but using the same font as for normal text, which is a variable width font
   if supported by the output device.
 .El  .El
 .Pp  .Pp
 The type must be provided first.  The
 Secondary arguments are as follows:  .Ar type
 .Bl -tag -width 12n -offset indent  must be provided first.
   Additional arguments may follow:
   .Bl -tag -width 13n -offset indent
 .It Fl offset Ar width  .It Fl offset Ar width
 Offset by the value of  Indent the display by the
 .Ar width ,  .Ar width ,
 which is interpreted as one of the following, specified in order:  which may be one of the following:
 .Bl -item  .Bl -item
 .It  .It
 As one of the pre-defined strings  One of the pre-defined strings
 .Ar indent ,  .Cm indent ,
 the width of standard indentation;  the width of a standard indentation (six constant width characters);
 .Ar indent-two ,  .Cm indent-two ,
 twice  twice
 .Ar indent ;  .Cm indent ;
 .Ar left ,  .Cm left ,
 which has no effect ;  which has no effect;
 .Ar right ,  .Cm right ,
 which justifies to the right margin; and  which justifies to the right margin; or
 .Ar center ,  .Cm center ,
 which aligns around an imagined centre axis.  which aligns around an imagined centre axis.
 .It  .It
 As a precalculated width for a named macro.  A macro invocation, which selects a predefined width
   associated with that macro.
 The most popular is the imaginary macro  The most popular is the imaginary macro
 .Ar \&Ds ,  .Ar \&Ds ,
 which resolves to  which resolves to
 .Ar 6n .  .Sy 6n .
 .It  .It
 As a scaling unit following the syntax described in  A width using the syntax described in
 .Sx Scaling Widths .  .Sx Scaling Widths .
 .It  .It
 As the calculated string length of the opaque string.  An arbitrary string, which indents by the length of this string.
 .El  .El
 .Pp  .Pp
 If unset, it will revert to the value of  When the argument is missing,
 .Ar 8n  .Fl offset
 as described in  is ignored.
 .Sx Scaling Widths .  
 .It Fl compact  .It Fl compact
 Do not assert a vertical space before the block.  Do not assert vertical space before the display.
 .It Fl file Ar file  
 Prepend the file  
 .Ar file  
 before any text or macros within the block.  
 .El  .El
 .Pp  .Pp
 Examples:  Examples:
 .Bd -literal -offset indent  .Bd -literal -offset indent
 \&.Bd \-unfilled \-offset two-indent \-compact  \&.Bd \-literal \-offset indent \-compact
    Hello       world.     Hello       world.
 \&.Ed  \&.Ed
 .Ed  .Ed
Line 1097  See also
Line 1434  See also
 and  and
 .Sx \&Dl .  .Sx \&Dl .
 .Ss \&Bf  .Ss \&Bf
   Change the font mode for a scoped block of text.
   Its syntax is as follows:
   .Bd -ragged -offset indent
   .Pf \. Sx \&Bf
   .Oo
   .Fl emphasis | literal | symbolic |
   .Cm \&Em | \&Li | \&Sy
   .Oc
   .Ed
   .Pp
   The
   .Fl emphasis
   and
   .Cm \&Em
   argument are equivalent, as are
   .Fl symbolic
   and
   .Cm \&Sy ,
   and
   .Fl literal
   and
   .Cm \&Li .
   Without an argument, this macro does nothing.
   The font mode continues until broken by a new font mode in a nested
   scope or
   .Sx \&Ef
   is encountered.
   .Pp
   See also
   .Sx \&Li ,
   .Sx \&Ef ,
   .Sx \&Em ,
   and
   .Sx \&Sy .
 .Ss \&Bk  .Ss \&Bk
   For each macro, keep its output together on the same output line,
   until the end of the macro or the end of the input line is reached,
   whichever comes first.
   Line breaks in text lines are unaffected.
   The syntax is as follows:
   .Pp
   .D1 Pf \. Sx \&Bk Fl words
   .Pp
   The
   .Fl words
   argument is required; additional arguments are ignored.
   .Pp
   The following example will not break within each
   .Sx \&Op
   macro line:
   .Bd -literal -offset indent
   \&.Bk \-words
   \&.Op Fl f Ar flags
   \&.Op Fl o Ar output
   \&.Ek
   .Ed
   .Pp
   Be careful in using over-long lines within a keep block!
   Doing so will clobber the right margin.
 .Ss \&Bl  .Ss \&Bl
 Begins a list composed of one or more list entries.  Begin a list.
 A list is associated with a type, which is a required argument.  Lists consist of items specified using the
 Other arguments are  
 .Fl width ,  
 defined per-type as accepting a literal or  
 .Sx Scaling Widths  
 value;  
 .Fl offset ,  
 also accepting a literal or  
 .Sx Scaling Widths  
 value setting the list's global offset; and  
 .Fl compact ,  
 suppressing the default vertical space printed before each list entry.  
 A list entry is specified by the  
 .Sx \&It  .Sx \&It
 macro, which consists of a head and optional body (depending on the list  macro, containing a head or a body or both.
 type).  The list syntax is as follows:
   .Bd -ragged -offset indent
   .Pf \. Sx \&Bl
   .Fl Ns Ar type
   .Op Fl width Ar val
   .Op Fl offset Ar val
   .Op Fl compact
   .Op HEAD ...
   .Ed
   .Pp
   The list
   .Ar type
   is mandatory and must be specified first.
   The
   .Fl width
   and
   .Fl offset
   arguments accept
   .Sx Scaling Widths
   or use the length of the given string.
   The
   .Fl offset
   is a global indentation for the whole list, affecting both item heads
   and bodies.
   For those list types supporting it, the
   .Fl width
   argument requests an additional indentation of item bodies,
   to be added to the
   .Fl offset .
   Unless the
   .Fl compact
   argument is specified, list entries are separated by vertical space.
   .Pp
 A list must specify one of the following list types:  A list must specify one of the following list types:
 .Bl -tag -width 12n -offset indent  .Bl -tag -width 12n -offset indent
 .It Fl bullet  .It Fl bullet
 A list offset by a bullet.  No item heads can be specified, but a bullet will be printed at the head
 The head of list entries must be empty.  of each item.
 List entry bodies are positioned after the bullet.  Item bodies start on the same output line as the bullet
 The  and are indented according to the
 .Fl width  .Fl width
 argument varies the width of list bodies' left-margins.  argument.
 .It Fl column  .It Fl column
 A columnated list.  A columnated list.
 The  The
 .Fl width  .Fl width
 argument has no effect.  argument has no effect; instead, each argument specifies the width
 The number of columns is specified as parameters to the  of one column, using either the
 .Sx \&Bl  
 macro.  
 These dictate the width of columns either as  
 .Sx Scaling Widths  .Sx Scaling Widths
 or literal text.  syntax or the string length of the argument.
 If the initial macro of a  If the first line of the body of a
 .Fl column  .Fl column
 list is not an  list is not an
 .Sx \&It ,  
 an  
 .Sx \&It  .Sx \&It
 context spanning each line is implied until an  macro line,
 .Sx \&It  .Sx \&It
 line macro is encountered, at which point list bodies are interpreted as  contexts spanning one input line each are implied until an
   .Sx \&It
   macro line is encountered, at which point items start being interpreted as
 described in the  described in the
 .Sx \&It  .Sx \&It
 documentation.  documentation.
 .It Fl dash  .It Fl dash
 A list offset by a dash (hyphen).  Like
 The head of list entries must be empty.  .Fl bullet ,
 List entry bodies are positioned past the dash.  except that dashes are used in place of bullets.
 The  
 .Fl width  
 argument varies the width of list bodies' left-margins.  
 .It Fl diag  .It Fl diag
 Like  Like
 .Fl inset ,  .Fl inset ,
 but with additional formatting to the head.  except that item heads are not parsed for macro invocations.
 The  Most often used in the
 .Fl width  .Em DIAGNOSTICS
 argument varies the width of list bodies' left-margins.  section with error constants in the item heads.
 .It Fl enum  .It Fl enum
 An enumerated list offset by the enumeration from 1.  A numbered list.
 The head of list entries must be empty.  No item heads can be specified.
 List entry bodies are positioned after the enumeration.  Formatted like
 The  .Fl bullet ,
 .Fl width  except that cardinal numbers are used in place of bullets,
 argument varies the width of list bodies' left-margins.  starting at 1.
 .It Fl hang  .It Fl hang
 Like  Like
 .Fl tag ,  .Fl tag ,
 but instead of list bodies positioned after the head, they trail the  except that the first lines of item bodies are not indented, but follow
 head text.  the item heads like in
 The  .Fl inset
 .Fl width  lists.
 argument varies the width of list bodies' left-margins.  
 .It Fl hyphen  .It Fl hyphen
 Synonym for  Synonym for
 .Fl dash .  .Fl dash .
 .It Fl inset  .It Fl inset
 List bodies follow the list head.  Item bodies follow items heads on the same line, using normal inter-word
 The  spacing.
   Bodies are not indented, and the
 .Fl width  .Fl width
 argument is ignored.  argument is ignored.
 .It Fl item  .It Fl item
 This produces blocks of text.  No item heads can be specified, and none are printed.
 The head of list entries must be empty.  Bodies are not indented, and the
 The  
 .Fl width  .Fl width
 argument is ignored.  argument is ignored.
 .It Fl ohang  .It Fl ohang
 List bodies are positioned on the line following the head.  Item bodies start on the line following item heads and are not indented.
 The  The
 .Fl width  .Fl width
 argument is ignored.  argument is ignored.
 .It Fl tag  .It Fl tag
 A list offset by list entry heads.  List entry bodies are positioned  Item bodies are indented according to the
 after the head as specified by the  
 .Fl width  .Fl width
 argument.  argument.
   When an item head fits inside the indentation, the item body follows
   this head on the same output line.
   Otherwise, the body starts on the output line following the head.
 .El  .El
 .Pp  .Pp
   Lists may be nested within lists and displays.
   Nesting of
   .Fl column
   and
   .Fl enum
   lists may not be portable.
   .Pp
 See also  See also
   .Sx \&El
   and
 .Sx \&It .  .Sx \&It .
 .Ss \&Bo  .Ss \&Bo
 Begins a block enclosed by square brackets.  Begin a block enclosed by square brackets.
 Does not have any head arguments.  Does not have any head arguments.
 .Pp  .Pp
 Examples:  Examples:
 .Bd -literal -offset indent  .Bd -literal -offset indent -compact
 \&.Bo 1 ,  \&.Bo 1 ,
 \&.Dv BUFSIZ \&Bc  \&.Dv BUFSIZ \&Bc
 .Ed  .Ed
Line 1221  See also
Line 1640  See also
 Encloses its arguments in square brackets.  Encloses its arguments in square brackets.
 .Pp  .Pp
 Examples:  Examples:
 .D1 \&.Bq 1 , \&Dv BUFSIZ  .Dl \&.Bq 1 , \&Dv BUFSIZ
 .Pp  .Pp
 .Em Remarks :  .Em Remarks :
 this macro is sometimes abused to emulate optional arguments for  this macro is sometimes abused to emulate optional arguments for
Line 1234  and
Line 1653  and
 See also  See also
 .Sx \&Bo .  .Sx \&Bo .
 .Ss \&Brc  .Ss \&Brc
 Closes a  Close a
 .Sx \&Bro  .Sx \&Bro
 block.  Does not have any tail arguments.  block.
   Does not have any tail arguments.
 .Ss \&Bro  .Ss \&Bro
 Begins a block enclosed by curly braces.  Begin a block enclosed by curly braces.
 Does not have any head arguments.  Does not have any head arguments.
 .Pp  .Pp
 Examples:  Examples:
 .Bd -literal -offset indent  .Bd -literal -offset indent -compact
 \&.Bro 1 , ... ,  \&.Bro 1 , ... ,
 \&.Va n \&Brc  \&.Va n \&Brc
 .Ed  .Ed
Line 1253  See also
Line 1673  See also
 Encloses its arguments in curly braces.  Encloses its arguments in curly braces.
 .Pp  .Pp
 Examples:  Examples:
 .D1 \&.Brq 1 , ... , \&Va n  .Dl \&.Brq 1 , ... , \&Va n
 .Pp  .Pp
 See also  See also
 .Sx \&Bro .  .Sx \&Bro .
Line 1262  Format the BSD/OS version provided as an argument, or 
Line 1682  Format the BSD/OS version provided as an argument, or 
 no argument is provided.  no argument is provided.
 .Pp  .Pp
 Examples:  Examples:
 .D1 \&.Bsx 1.0  .Dl \&.Bsx 1.0
 .D1 \&.Bsx  .Dl \&.Bsx
 .Pp  .Pp
 See also  See also
 .Sx \&At ,  .Sx \&At ,
Line 1282  Format the BSD version provided as an argument, or a d
Line 1702  Format the BSD version provided as an argument, or a d
 argument is provided.  argument is provided.
 .Pp  .Pp
 Examples:  Examples:
 .D1 \&.Bx 4.4  .Dl \&.Bx 4.3 Tahoe
 .D1 \&.Bx  .Dl \&.Bx 4.4
   .Dl \&.Bx
 .Pp  .Pp
 See also  See also
 .Sx \&At ,  .Sx \&At ,
Line 1295  See also
Line 1716  See also
 and  and
 .Sx \&Ux .  .Sx \&Ux .
 .Ss \&Cd  .Ss \&Cd
 Configuration declaration.  Kernel configuration declaration.
 This denotes strings accepted by  This denotes strings accepted by
 .Xr config 8 .  .Xr config 8 .
   It is most often used in section 4 manual pages.
 .Pp  .Pp
 Examples:  Examples:
 .D1 \&.Cd device le0 at scode?  .Dl \&.Cd device le0 at scode?
 .Pp  .Pp
 .Em Remarks :  .Em Remarks :
 this macro is commonly abused by using quoted literals to retain  this macro is commonly abused by using quoted literals to retain
 white-space and align consecutive  whitespace and align consecutive
 .Sx \&Cd  .Sx \&Cd
 declarations.  declarations.
 This practise is discouraged.  This practise is discouraged.
 .Ss \&Cm  .Ss \&Cm
 Command modifiers.  Command modifiers.
 Useful when specifying configuration options or keys.  Typically used for fixed strings passed as arguments, unless
   .Sx \&Fl
   is more appropriate.
   Also useful when specifying configuration options or keys.
 .Pp  .Pp
 Examples:  Examples:
 .D1 \&.Cm ControlPath  .Dl ".Nm mt Fl f Ar device Cm rewind"
 .D1 \&.Cm ControlMaster  .Dl ".Nm ps Fl o Cm pid , Ns Cm command"
 .Pp  .Dl ".Nm dd Cm if= Ns Ar file1 Cm of= Ns Ar file2"
 See also  .Dl ".Cm IdentityFile Pa ~/.ssh/id_rsa"
 .Sx \&Fl .  .Dl ".Cm LogLevel Dv DEBUG"
 .Ss \&D1  .Ss \&D1
 One-line indented display.  One-line indented display.
 This is formatted by the default rules and is useful for simple indented  This is formatted by the default rules and is useful for simple indented
Line 1325  statements.
Line 1750  statements.
 It is followed by a newline.  It is followed by a newline.
 .Pp  .Pp
 Examples:  Examples:
 .D1 \&.D1 \&Fl abcdefgh  .Dl \&.D1 \&Fl abcdefgh
 .Pp  .Pp
 See also  See also
 .Sx \&Bd  .Sx \&Bd
 and  and
 .Sx \&Dl .  .Sx \&Dl .
 .Ss \&Db  .Ss \&Db
 Start a debugging context.  Switch debugging mode.
 This macro is parsed, but generally ignored.  Its syntax is as follows:
 Its calling syntax is as follows:  
 .Pp  .Pp
 .D1 \. Ns Sx \&Db Cm on | off  .D1 Pf \. Sx \&Db Cm on | off
   .Pp
   This macro is ignored by
   .Xr mandoc 1 .
 .Ss \&Dc  .Ss \&Dc
 Closes a  Close a
 .Sx \&Do  .Sx \&Do
 block.  Does not have any tail arguments.  block.
   Does not have any tail arguments.
 .Ss \&Dd  .Ss \&Dd
 Document date.  Document date.
 This is the mandatory first macro of any  This is the mandatory first macro of any
 .Nm  .Nm
 manual.  manual.
 Its calling syntax is as follows:  Its syntax is as follows:
 .Pp  .Pp
 .D1 \. Ns Sx \&Dd Cm date  .D1 Pf \. Sx \&Dd Ar month day , year
 .Pp  .Pp
 The  The
 .Cm date  .Ar month
 field may be either  is the full English month name, the
 .Ar $\&Mdocdate$ ,  .Ar day
 which signifies the current manual revision date dictated by  is an optionally zero-padded numeral, and the
   .Ar year
   is the full four-digit year.
   .Pp
   Other arguments are not portable; the
   .Xr mandoc 1
   utility handles them as follows:
   .Bl -dash -offset 3n -compact
   .It
   To have the date automatically filled in by the
   .Ox
   version of
 .Xr cvs 1 ,  .Xr cvs 1 ,
 or instead a valid canonical date as specified by  the special string
 .Sx Dates .  .Dq $\&Mdocdate$
 If a date does not conform, the current date is used instead.  can be given as an argument.
   .It
   A few alternative date formats are accepted as well
   and converted to the standard form.
   .It
   If a date string cannot be parsed, it is used verbatim.
   .It
   If no date string is given, the current date is used.
   .El
 .Pp  .Pp
 Examples:  Examples:
 .D1 \&.Dd $\&Mdocdate$  .Dl \&.Dd $\&Mdocdate$
 .D1 \&.Dd $\&Mdocdate: July 21 2007$  .Dl \&.Dd $\&Mdocdate: July 21 2007$
 .D1 \&.Dd July 21, 2007  .Dl \&.Dd July 21, 2007
 .Pp  .Pp
 See also  See also
 .Sx \&Dt  .Sx \&Dt
Line 1376  invocations.
Line 1823  invocations.
 It is followed by a newline.  It is followed by a newline.
 .Pp  .Pp
 Examples:  Examples:
 .D1 \&.Dl % mandoc mdoc.7 | less  .Dl \&.Dl % mandoc mdoc.7 \e(ba less
 .Pp  .Pp
 See also  See also
 .Sx \&Bd  .Sx \&Bd
 and  and
 .Sx \&D1 .  .Sx \&D1 .
 .Ss \&Do  .Ss \&Do
 Begins a block enclosed by double quotes.  Does not have any head  Begin a block enclosed by double quotes.
 arguments.  Does not have any head arguments.
 .Pp  .Pp
 Examples:  Examples:
 .D1 \&.D1 \&Do April is the cruellest month \&Dc \e(em T.S. Eliot  .Bd -literal -offset indent -compact
   \&.Do
   April is the cruellest month
   \&.Dc
   \e(em T.S. Eliot
   .Ed
 .Pp  .Pp
 See also  See also
 .Sx \&Dq .  .Sx \&Dq .
 .Ss \&Dq  .Ss \&Dq
 Encloses its arguments in double quotes.  Encloses its arguments in
   .Dq typographic
   double-quotes.
 .Pp  .Pp
 Examples:  Examples:
 .Bd -literal -offset indent -compact  .Bd -literal -offset indent -compact
Line 1401  Examples:
Line 1855  Examples:
 .Ed  .Ed
 .Pp  .Pp
 See also  See also
   .Sx \&Qq ,
   .Sx \&Sq ,
   and
 .Sx \&Do .  .Sx \&Do .
 .Ss \&Dt  .Ss \&Dt
 Document title.  Document title.
 This is the mandatory second macro of any  This is the mandatory second macro of any
 .Nm  .Nm
 file.  file.
 Its calling syntax is as follows:  Its syntax is as follows:
   .Bd -ragged -offset indent
   .Pf \. Sx \&Dt
   .Oo
   .Ar title
   .Oo
   .Ar section
   .Op Ar volume | arch
   .Oc
   .Oc
   .Ed
 .Pp  .Pp
 .D1 \. Ns Sx \&Dt Op Cm title Op Cm section Op Cm volume | arch  
 .Pp  
 Its arguments are as follows:  Its arguments are as follows:
 .Bl -tag -width Ds -offset Ds  .Bl -tag -width Ds -offset Ds
 .It Cm title  .It Ar title
 The document's title (name), defaulting to  The document's title (name), defaulting to
 .Qq UNKNOWN  .Dq UNKNOWN
 if unspecified.  if unspecified.
 It should be capitalised.  It should be capitalised.
 .It Cm section  .It Ar section
 The manual section.  The manual section.
 This may be one of  This may be one of
 .Ar 1  .Ar 1
Line 1455  or
Line 1920  or
 .Ar paper  .Ar paper
 .Pq paper .  .Pq paper .
 It should correspond to the manual's filename suffix and defaults to  It should correspond to the manual's filename suffix and defaults to
 .Qq 1  .Dq 1
 if unspecified.  if unspecified.
 .It Cm volume  .It Ar volume
 This overrides the volume inferred from  This overrides the volume inferred from
 .Ar section .  .Ar section .
 This field is optional, and if specified, must be one of  This field is optional, and if specified, must be one of
Line 1486  This field is optional, and if specified, must be one 
Line 1951  This field is optional, and if specified, must be one 
 or  or
 .Ar CON  .Ar CON
 .Pq contributed manuals .  .Pq contributed manuals .
 .It Cm arch  .It Ar arch
 This specifies a specific relevant architecture.  This specifies a specific relevant architecture.
 If  If
 .Cm volume  .Ar volume
 is not provided, it may be used in its place, else it may be used  is not provided, it may be used in its place, else it may be used
 subsequent that.  subsequent that.
 It, too, is optional.  It, too, is optional.
Line 1510  It must be one of
Line 1975  It must be one of
 .Ar luna88k ,  .Ar luna88k ,
 .Ar mac68k ,  .Ar mac68k ,
 .Ar macppc ,  .Ar macppc ,
   .Ar mips64 ,
 .Ar mvme68k ,  .Ar mvme68k ,
 .Ar mvme88k ,  .Ar mvme88k ,
 .Ar mvmeppc ,  .Ar mvmeppc ,
Line 1525  or
Line 1991  or
 .El  .El
 .Pp  .Pp
 Examples:  Examples:
 .D1 \&.Dt FOO 1  .Dl \&.Dt FOO 1
 .D1 \&.Dt FOO 4 KM  .Dl \&.Dt FOO 4 KM
 .D1 \&.Dt FOO 9 i386  .Dl \&.Dt FOO 9 i386
 .Pp  .Pp
 See also  See also
 .Sx \&Dd  .Sx \&Dd
 and  and
 .Sx \&Os .  .Sx \&Os .
 .Ss \&Dv  .Ss \&Dv
 Defined variables such as preprocessor constants.  Defined variables such as preprocessor constants, constant symbols,
   enumeration values, and so on.
 .Pp  .Pp
 Examples:  Examples:
 .D1 \&.Dv BUFSIZ  .Dl \&.Dv NULL
 .D1 \&.Dv STDOUT_FILENO  .Dl \&.Dv BUFSIZ
   .Dl \&.Dv STDOUT_FILENO
 .Pp  .Pp
 See also  See also
 .Sx \&Er .  .Sx \&Er
   and
   .Sx \&Ev
   for special-purpose constants and
   .Sx \&Va
   for variable symbols.
 .Ss \&Dx  .Ss \&Dx
 Format the DragonFly BSD version provided as an argument, or a default  Format the DragonFly BSD version provided as an argument, or a default
 value if no argument is provided.  value if no argument is provided.
 .Pp  .Pp
 Examples:  Examples:
 .D1 \&.Dx 2.4.1  .Dl \&.Dx 2.4.1
 .D1 \&.Dx  .Dl \&.Dx
 .Pp  .Pp
 See also  See also
 .Sx \&At ,  .Sx \&At ,
Line 1560  See also
Line 2033  See also
 and  and
 .Sx \&Ux .  .Sx \&Ux .
 .Ss \&Ec  .Ss \&Ec
   Close a scope started by
   .Sx \&Eo .
   Its syntax is as follows:
   .Pp
   .D1 Pf \. Sx \&Ec Op Ar TERM
   .Pp
   The
   .Ar TERM
   argument is used as the enclosure tail, for example, specifying \e(rq
   will emulate
   .Sx \&Dc .
 .Ss \&Ed  .Ss \&Ed
   End a display context started by
   .Sx \&Bd .
 .Ss \&Ef  .Ss \&Ef
   End a font mode context started by
   .Sx \&Bf .
 .Ss \&Ek  .Ss \&Ek
   End a keep context started by
   .Sx \&Bk .
 .Ss \&El  .Ss \&El
 Ends a list context started by  End a list context started by
 .Sx \&Bl .  .Sx \&Bl .
 .Pp  .Pp
 See also  See also
Line 1572  See also
Line 2062  See also
 and  and
 .Sx \&It .  .Sx \&It .
 .Ss \&Em  .Ss \&Em
 Denotes text that should be emphasised.  Denotes text that should be
   .Em emphasised .
 Note that this is a presentation term and should not be used for  Note that this is a presentation term and should not be used for
 stylistically decorating technical terms.  stylistically decorating technical terms.
   Depending on the output device, this is usually represented
   using an italic font or underlined characters.
 .Pp  .Pp
 Examples:  Examples:
 .D1 \&.Em Warnings!  .Dl \&.Em Warnings!
 .D1 \&.Em Remarks :  .Dl \&.Em Remarks :
   .Pp
   See also
   .Sx \&Bf ,
   .Sx \&Li ,
   .Sx \&No ,
   and
   .Sx \&Sy .
 .Ss \&En  .Ss \&En
   This macro is obsolete and not implemented in
   .Xr mandoc 1 .
 .Ss \&Eo  .Ss \&Eo
   An arbitrary enclosure.
   Its syntax is as follows:
   .Pp
   .D1 Pf \. Sx \&Eo Op Ar TERM
   .Pp
   The
   .Ar TERM
   argument is used as the enclosure head, for example, specifying \e(lq
   will emulate
   .Sx \&Do .
 .Ss \&Er  .Ss \&Er
 Display error constants.  Error constants for definitions of the
   .Va errno
   libc global variable.
   This is most often used in section 2 and 3 manual pages.
 .Pp  .Pp
 Examples:  Examples:
 .D1 \&.Er EPERM  .Dl \&.Er EPERM
 .D1 \&.Er ENOENT  .Dl \&.Er ENOENT
 .Pp  .Pp
 See also  See also
 .Sx \&Dv .  .Sx \&Dv
   for general constants.
 .Ss \&Es  .Ss \&Es
   This macro is obsolete and not implemented.
 .Ss \&Ev  .Ss \&Ev
 Environmental variables such as those specified in  Environmental variables such as those specified in
 .Xr environ 7 .  .Xr environ 7 .
 .Pp  .Pp
 Examples:  Examples:
 .D1 \&.Ev DISPLAY  .Dl \&.Ev DISPLAY
 .D1 \&.Ev PATH  .Dl \&.Ev PATH
   .Pp
   See also
   .Sx \&Dv
   for general constants.
 .Ss \&Ex  .Ss \&Ex
 Inserts text regarding a utility's exit values.  Insert a standard sentence regarding command exit values of 0 on success
 This macro must have first the  and >0 on failure.
 .Fl std  This is most often used in section 1, 6, and 8 manual pages.
 argument specified, then an optional  Its syntax is as follows:
 .Ar utility .  .Pp
   .D1 Pf \. Sx \&Ex Fl std Op Ar utility ...
   .Pp
 If  If
 .Ar utility  .Ar utility
 is not provided, the document's name as stipulated in  is not specified, the document's name set by
 .Sx \&Nm  .Sx \&Nm
 is provided.  is used.
   Multiple
   .Ar utility
   arguments are treated as separate utilities.
   .Pp
   See also
   .Sx \&Rv .
 .Ss \&Fa  .Ss \&Fa
 Function argument.  Function argument.
   Its syntax is as follows:
   .Bd -ragged -offset indent
   .Pf \. Sx \&Fa
   .Op Cm argtype
   .Cm argname
   .Ed
   .Pp
 This may be invoked for names with or without the corresponding type.  This may be invoked for names with or without the corresponding type.
 It is also used to specify the field name of a structure.  It is also used to specify the field name of a structure.
 Most often, the  Most often, the
 .Sx \&Fa  .Sx \&Fa
 macro is used in the  macro is used in the
 .Em SYNOPSIS  .Em SYNOPSIS
   within
   .Sx \&Fo
 section when documenting multi-line function prototypes.  section when documenting multi-line function prototypes.
 If invoked with multiple arguments, the arguments are separated by a  If invoked with multiple arguments, the arguments are separated by a
 comma.  comma.
Line 1625  Furthermore, if the following macro is another
Line 2163  Furthermore, if the following macro is another
 the last argument will also have a trailing comma.  the last argument will also have a trailing comma.
 .Pp  .Pp
 Examples:  Examples:
 .D1 \&.Fa \(dqconst char *p\(dq  .Dl \&.Fa \(dqconst char *p\(dq
 .D1 \&.Fa \(dqint a\(dq \(dqint b\(dq \(dqint c\(dq  .Dl \&.Fa \(dqint a\(dq \(dqint b\(dq \(dqint c\(dq
 .D1 \&.Fa foo  .Dl \&.Fa foo
   .Pp
   See also
   .Sx \&Fo .
 .Ss \&Fc  .Ss \&Fc
   End a function context started by
   .Sx \&Fo .
 .Ss \&Fd  .Ss \&Fd
 Historically used to document include files.  Historically used to document include files.
 This usage has been deprecated in favour of  This usage has been deprecated in favour of
Line 1636  This usage has been deprecated in favour of
Line 2179  This usage has been deprecated in favour of
 Do not use this macro.  Do not use this macro.
 .Pp  .Pp
 See also  See also
   .Sx MANUAL STRUCTURE
   and
 .Sx \&In .  .Sx \&In .
 .Ss \&Fl  .Ss \&Fl
 Command-line flag.  Command-line flag or option.
 Used when listing arguments to command-line utilities.  Used when listing arguments to command-line utilities.
 Prints a fixed-width hyphen  Prints a fixed-width hyphen
 .Sq \-  .Sq \-
Line 1648  If the argument is a macro, a hyphen is prefixed to th
Line 2193  If the argument is a macro, a hyphen is prefixed to th
 output.  output.
 .Pp  .Pp
 Examples:  Examples:
 .D1 \&.Fl a b c  .Dl ".Fl R Op Fl H | L | P"
 .D1 \&.Fl \&Pf a b  .Dl ".Op Fl 1AaCcdFfgHhikLlmnopqRrSsTtux"
 .D1 \&.Fl  .Dl ".Fl type Cm d Fl name Pa CVS"
 .D1 \&.Op \&Fl o \&Ns \&Ar file  .Dl ".Fl Ar signal_number"
   .Dl ".Fl o Fl"
 .Pp  .Pp
 See also  See also
 .Sx \&Cm .  .Sx \&Cm .
 .Ss \&Fn  .Ss \&Fn
   A function name.
   Its syntax is as follows:
   .Bd -ragged -offset indent
   .Pf \. Ns Sx \&Fn
   .Op Ar functype
   .Ar funcname
   .Op Oo Ar argtype Oc Ar argname
   .Ed
   .Pp
   Function arguments are surrounded in parenthesis and
   are delimited by commas.
   If no arguments are specified, blank parenthesis are output.
   In the
   .Em SYNOPSIS
   section, this macro starts a new output line,
   and a blank line is automatically inserted between function definitions.
   .Pp
   Examples:
   .Dl \&.Fn \(dqint funcname\(dq \(dqint arg0\(dq \(dqint arg1\(dq
   .Dl \&.Fn funcname \(dqint arg0\(dq
   .Dl \&.Fn funcname arg0
   .Pp
   .Bd -literal -offset indent -compact
   \&.Ft functype
   \&.Fn funcname
   .Ed
   .Pp
   When referring to a function documented in another manual page, use
   .Sx \&Xr
   instead.
   See also
   .Sx MANUAL STRUCTURE ,
   .Sx \&Fo ,
   and
   .Sx \&Ft .
 .Ss \&Fo  .Ss \&Fo
   Begin a function block.
   This is a multi-line version of
   .Sx \&Fn .
   Its syntax is as follows:
   .Pp
   .D1 Pf \. Sx \&Fo Ar funcname
   .Pp
   Invocations usually occur in the following context:
   .Bd -ragged -offset indent
   .Pf \. Sx \&Ft Ar functype
   .br
   .Pf \. Sx \&Fo Ar funcname
   .br
   .Pf \. Sx \&Fa Oo Ar argtype Oc Ar argname
   .br
   \&.\.\.
   .br
   .Pf \. Sx \&Fc
   .Ed
   .Pp
   A
   .Sx \&Fo
   scope is closed by
   .Sx \&Fc .
   .Pp
   See also
   .Sx MANUAL STRUCTURE ,
   .Sx \&Fa ,
   .Sx \&Fc ,
   and
   .Sx \&Ft .
 .Ss \&Fr  .Ss \&Fr
   This macro is obsolete and not implemented in
   .Xr mandoc 1 .
   .Pp
   It was used to show function return values.
   The syntax was:
   .Pp
   .Dl Pf . Sx \&Fr Ar value
 .Ss \&Ft  .Ss \&Ft
   A function type.
   Its syntax is as follows:
   .Pp
   .D1 Pf \. Sx \&Ft Ar functype
   .Pp
   In the
   .Em SYNOPSIS
   section, a new output line is started after this macro.
   .Pp
   Examples:
   .Dl \&.Ft int
   .Bd -literal -offset indent -compact
   \&.Ft functype
   \&.Fn funcname
   .Ed
   .Pp
   See also
   .Sx MANUAL STRUCTURE ,
   .Sx \&Fn ,
   and
   .Sx \&Fo .
 .Ss \&Fx  .Ss \&Fx
 Format the FreeBSD version provided as an argument, or a default value  Format the
   .Fx
   version provided as an argument, or a default value
 if no argument is provided.  if no argument is provided.
 .Pp  .Pp
 Examples:  Examples:
 .D1 \&.Fx 7.1  .Dl \&.Fx 7.1
 .D1 \&.Fx  .Dl \&.Fx
 .Pp  .Pp
 See also  See also
 .Sx \&At ,  .Sx \&At ,
Line 1677  See also
Line 2319  See also
 and  and
 .Sx \&Ux .  .Sx \&Ux .
 .Ss \&Hf  .Ss \&Hf
   This macro is not implemented in
   .Xr mandoc 1 .
   .Pp
   It was used to include the contents of a (header) file literally.
   The syntax was:
   .Pp
   .Dl Pf . Sx \&Hf Ar filename
 .Ss \&Ic  .Ss \&Ic
   Designate an internal or interactive command.
   This is similar to
   .Sx \&Cm
   but used for instructions rather than values.
   .Pp
   Examples:
   .Dl \&.Ic :wq
   .Dl \&.Ic hash
   .Dl \&.Ic alias
   .Pp
   Note that using
   .Sx \&Bd Fl literal
   or
   .Sx \&D1
   is preferred for displaying code; the
   .Sx \&Ic
   macro is used when referring to specific instructions.
 .Ss \&In  .Ss \&In
   An
   .Dq include
   file.
   When invoked as the first macro on an input line in the
   .Em SYNOPSIS
   section, the argument is displayed in angle brackets
   and preceded by
   .Dq #include ,
   and a blank line is inserted in front if there is a preceding
   function declaration.
   This is most often used in section 2, 3, and 9 manual pages.
   .Pp
   Examples:
   .Dl \&.In sys/types.h
   .Pp
   See also
   .Sx MANUAL STRUCTURE .
 .Ss \&It  .Ss \&It
 A list item.  The syntax of this macro depends on the list type.  A list item.
   The syntax of this macro depends on the list type.
 .Pp  .Pp
 Lists  Lists
 of type  of type
Line 1689  of type
Line 2373  of type
 .Fl inset ,  .Fl inset ,
 and  and
 .Fl diag  .Fl diag
 have the following calling syntax:  have the following syntax:
 .Pp  .Pp
 .D1 \. Ns Sx \&It Cm args  .D1 Pf \. Sx \&It Ar args
 .Pp  .Pp
 Lists of type  Lists of type
 .Fl bullet ,  .Fl bullet ,
Line 1700  Lists of type
Line 2384  Lists of type
 .Fl hyphen  .Fl hyphen
 and  and
 .Fl item  .Fl item
 have the following calling syntax:  have the following syntax:
 .Pp  .Pp
 .D1 \. Ns Sx \&It  .D1 Pf \. Sx \&It
 .Pp  .Pp
 with subsequent lines interpreted within the scope of the  with subsequent lines interpreted within the scope of the
 .Sx \&It  .Sx \&It
Line 1713  or another
Line 2397  or another
 .Pp  .Pp
 The  The
 .Fl tag  .Fl tag
 list has syntax  list has the following syntax:
 .Pp  .Pp
 .D1 \. Ns Sx \&It Op Cm args  .D1 Pf \. Sx \&It Op Cm args
 .Pp  .Pp
 with subsequent lines interpreted as with  Subsequent lines are interpreted as with
 .Fl bullet  .Fl bullet
 and family.  and family.
 The line arguments correspond to the list's left-hand side; body  The line arguments correspond to the list's left-hand side; body
Line 1726  arguments correspond to the list's contents.
Line 2410  arguments correspond to the list's contents.
 The  The
 .Fl column  .Fl column
 list is the most complicated.  list is the most complicated.
 Its syntax is  Its syntax is as follows:
 .Pp  .Pp
 .D1 \. Ns Sx \&It Op Cm args  .D1 Pf \. Sx \&It Ar cell Op <TAB> Ar cell ...
   .D1 Pf \. Sx \&It Ar cell Op Sx \&Ta Ar cell ...
 .Pp  .Pp
 where  The arguments consist of one or more lines of text and macros
 .Cm args  representing a complete table line.
 are phrases, a mix of macros and text corresponding to a line column,  Cells within the line are delimited by tabs or by the special
 delimited by tabs or the special  .Sx \&Ta
 .Sq \&Ta  block macro.
 pseudo-macro.  The tab cell delimiter may only be used within the
 Lines subsequent the  
 .Sx \&It  .Sx \&It
 are interpreted within the scope of the last phrase.  line itself; on following lines, only the
 Calling the pseudo-macro  .Sx \&Ta
 .Sq \&Ta  macro can be used to delimit cells, and
 will open a new phrase scope (this must occur on a macro line to be  .Sx \&Ta
 interpreted as a macro).  Note that the tab phrase delimiter may only be  is only recognised as a macro when called by other macros,
 used within the  not as the first macro on a line.
   .Pp
   Note that quoted strings may span tab-delimited cells on an
 .Sx \&It  .Sx \&It
 line itself.  line.
 Subsequent this, only the  For example,
 .Sq \&Ta  
 pseudo-macro may be used to delimit phrases.  
 Furthermore, note that quoted sections propogate over tab-delimited  
 phrases on an  
 .Sx \&It ,  
 for example,  
 .Pp  .Pp
 .D1 .It \(dqcol1 ; <TAB> col2 ;\(dq ;  .Dl .It \(dqcol1 ; <TAB> col2 ;\(dq \&;
 .Pp  .Pp
 will preserve the semicolon whitespace except for the last.  will preserve the semicolon whitespace except for the last.
 .Pp  .Pp
Line 1762  See also
Line 2442  See also
 .Sx \&Bl .  .Sx \&Bl .
 .Ss \&Lb  .Ss \&Lb
 Specify a library.  Specify a library.
 The calling syntax is as follows:  The syntax is as follows:
 .Pp  .Pp
 .D1 \. Ns Sx \&Lb Cm library  .D1 Pf \. Sx \&Lb Ar library
 .Pp  .Pp
 The  The
 .Cm library  .Ar library
 parameter may be a system library, such as  parameter may be a system library, such as
 .Cm libz  .Cm libz
 or  or
Line 1781  section as described in
Line 2461  section as described in
 .Sx MANUAL STRUCTURE .  .Sx MANUAL STRUCTURE .
 .Pp  .Pp
 Examples:  Examples:
 .D1 \&.Lb libz  .Dl \&.Lb libz
 .D1 \&.Lb mdoc  .Dl \&.Lb mdoc
 .Ss \&Li  .Ss \&Li
   Denotes text that should be in a
   .Li literal
   font mode.
   Note that this is a presentation term and should not be used for
   stylistically decorating technical terms.
   .Pp
   On terminal output devices, this is often indistinguishable from
   normal text.
   .Pp
   See also
   .Sx \&Bf ,
   .Sx \&Em ,
   .Sx \&No ,
   and
   .Sx \&Sy .
 .Ss \&Lk  .Ss \&Lk
 Format a hyperlink.  Format a hyperlink.
 The calling syntax is as follows:  Its syntax is as follows:
 .Pp  .Pp
 .D1 \. Ns Sx \&Lk Cm uri Op Cm name  .D1 Pf \. Sx \&Lk Ar uri Op Ar name
 .Pp  .Pp
 Examples:  Examples:
 .D1 \&.Lk http://bsd.lv "The BSD.lv Project"  .Dl \&.Lk http://bsd.lv \(dqThe BSD.lv Project\(dq
 .D1 \&.Lk http://bsd.lv  .Dl \&.Lk http://bsd.lv
 .Pp  .Pp
 See also  See also
 .Sx \&Mt .  .Sx \&Mt .
 .Ss \&Lp  .Ss \&Lp
   Synonym for
   .Sx \&Pp .
 .Ss \&Ms  .Ss \&Ms
   Display a mathematical symbol.
   Its syntax is as follows:
   .Pp
   .D1 Pf \. Sx \&Ms Ar symbol
   .Pp
   Examples:
   .Dl \&.Ms sigma
   .Dl \&.Ms aleph
 .Ss \&Mt  .Ss \&Mt
 Format a  Format a
 .Qq mailto:  .Dq mailto:
 hyperlink.  hyperlink.
 The calling syntax is as follows:  Its syntax is as follows:
 .Pp  .Pp
 .D1 \. Ns Sx \&Mt Cm address  .D1 Pf \. Sx \&Mt Ar address
 .Pp  .Pp
 Examples:  Examples:
 .D1 \&.Mt discuss@manpages.bsd.lv  .Dl \&.Mt discuss@manpages.bsd.lv
 .Ss \&Nd  .Ss \&Nd
   A one line description of the manual's content.
   This may only be invoked in the
   .Em SYNOPSIS
   section subsequent the
   .Sx \&Nm
   macro.
   .Pp
   Examples:
   .Dl Pf . Sx \&Nd mdoc language reference
   .Dl Pf . Sx \&Nd format and display UNIX manuals
   .Pp
   The
   .Sx \&Nd
   macro technically accepts child macros and terminates with a subsequent
   .Sx \&Sh
   invocation.
   Do not assume this behaviour: some
   .Xr whatis 1
   database generators are not smart enough to parse more than the line
   arguments and will display macros verbatim.
   .Pp
   See also
   .Sx \&Nm .
 .Ss \&Nm  .Ss \&Nm
   The name of the manual page, or \(em in particular in section 1, 6,
   and 8 pages \(em of an additional command or feature documented in
   the manual page.
   When first invoked, the
   .Sx \&Nm
   macro expects a single argument, the name of the manual page.
   Usually, the first invocation happens in the
   .Em NAME
   section of the page.
   The specified name will be remembered and used whenever the macro is
   called again without arguments later in the page.
   The
   .Sx \&Nm
   macro uses
   .Sx Block full-implicit
   semantics when invoked as the first macro on an input line in the
   .Em SYNOPSIS
   section; otherwise, it uses ordinary
   .Sx In-line
   semantics.
   .Pp
   Examples:
   .Bd -literal -offset indent
   \&.Sh SYNOPSIS
   \&.Nm cat
   \&.Op Fl benstuv
   \&.Op Ar
   .Ed
   .Pp
   In the
   .Em SYNOPSIS
   of section 2, 3 and 9 manual pages, use the
   .Sx \&Fn
   macro rather than
   .Sx \&Nm
   to mark up the name of the manual page.
 .Ss \&No  .Ss \&No
   Normal text.
   Closes the scope of any preceding in-line macro.
   When used after physical formatting macros like
   .Sx \&Em
   or
   .Sx \&Sy ,
   switches back to the standard font face and weight.
   Can also be used to embed plain text strings in macro lines
   using semantic annotation macros.
   .Pp
   Examples:
   .Dl ".Em italic , Sy bold , No and roman"
   .Pp
   .Bd -literal -offset indent -compact
   \&.Sm off
   \&.Cm :C No / Ar pattern No / Ar replacement No /
   \&.Sm on
   .Ed
   .Pp
   See also
   .Sx \&Em ,
   .Sx \&Li ,
   and
   .Sx \&Sy .
 .Ss \&Ns  .Ss \&Ns
   Suppress a space between the output of the preceding macro
   and the following text or macro.
   Following invocation, input is interpreted as normal text
   just like after an
   .Sx \&No
   macro.
   .Pp
   This has no effect when invoked at the start of a macro line.
   .Pp
   Examples:
   .Dl ".Ar name Ns = Ns Ar value"
   .Dl ".Cm :M Ns Ar pattern"
   .Dl ".Fl o Ns Ar output"
   .Pp
   See also
   .Sx \&No
   and
   .Sx \&Sm .
 .Ss \&Nx  .Ss \&Nx
 Format the NetBSD version provided as an argument, or a default value if  Format the
   .Nx
   version provided as an argument, or a default value if
 no argument is provided.  no argument is provided.
 .Pp  .Pp
 Examples:  Examples:
 .D1 \&.Nx 5.01  .Dl \&.Nx 5.01
 .D1 \&.Nx  .Dl \&.Nx
 .Pp  .Pp
 See also  See also
 .Sx \&At ,  .Sx \&At ,
Line 1830  See also
Line 2638  See also
 and  and
 .Sx \&Ux .  .Sx \&Ux .
 .Ss \&Oc  .Ss \&Oc
   Close multi-line
   .Sx \&Oo
   context.
 .Ss \&Oo  .Ss \&Oo
   Multi-line version of
   .Sx \&Op .
   .Pp
   Examples:
   .Bd -literal -offset indent -compact
   \&.Oo
   \&.Op Fl flag Ns Ar value
   \&.Oc
   .Ed
 .Ss \&Op  .Ss \&Op
   Optional part of a command line.
   Prints the argument(s) in brackets.
   This is most often used in the
   .Em SYNOPSIS
   section of section 1 and 8 manual pages.
   .Pp
   Examples:
   .Dl \&.Op \&Fl a \&Ar b
   .Dl \&.Op \&Ar a | b
   .Pp
   See also
   .Sx \&Oo .
 .Ss \&Os  .Ss \&Os
 Document operating system version.  Document operating system version.
 This is the mandatory third macro of  This is the mandatory third macro of
 any  any
 .Nm  .Nm
 file.  Its calling syntax is as follows:  file.
   Its syntax is as follows:
 .Pp  .Pp
 .D1 \. Ns Sx \&Os Op Cm system  .D1 Pf \. Sx \&Os Op Ar system Op Ar version
 .Pp  .Pp
 The optional  The optional
 .Cm system  .Ar system
 parameter specifies the relevant operating system or environment.  parameter specifies the relevant operating system or environment.
 Left unspecified, it defaults to the local operating system version.  Left unspecified, it defaults to the local operating system version.
 This is the suggested form.  This is the suggested form.
 .Pp  .Pp
 Examples:  Examples:
 .D1 \&.Os  .Dl \&.Os
 .D1 \&.Os KTH/CSC/TCS  .Dl \&.Os KTH/CSC/TCS
 .D1 \&.Os BSD 4.3  .Dl \&.Os BSD 4.3
 .Pp  .Pp
 See also  See also
 .Sx \&Dd  .Sx \&Dd
 and  and
 .Sx \&Dt .  .Sx \&Dt .
 .Ss \&Ot  .Ss \&Ot
 Unknown usage.  This macro is obsolete and not implemented in
   .Xr mandoc 1 .
 .Pp  .Pp
 .Em Remarks :  Historical
 this macro has been deprecated.  .Xr mdoc 7
   packages described it as
   .Dq "old function type (FORTRAN)" .
 .Ss \&Ox  .Ss \&Ox
 Format the OpenBSD version provided as an argument, or a default value  Format the
   .Ox
   version provided as an argument, or a default value
 if no argument is provided.  if no argument is provided.
 .Pp  .Pp
 Examples:  Examples:
 .D1 \&.Ox 4.5  .Dl \&.Ox 4.5
 .D1 \&.Ox  .Dl \&.Ox
 .Pp  .Pp
 See also  See also
 .Sx \&At ,  .Sx \&At ,
Line 1879  See also
Line 2717  See also
 and  and
 .Sx \&Ux .  .Sx \&Ux .
 .Ss \&Pa  .Ss \&Pa
   An absolute or relative file system path, or a file or directory name.
   If an argument is not provided, the character
   .Sq \(ti
   is used as a default.
   .Pp
   Examples:
   .Dl \&.Pa /usr/bin/mandoc
   .Dl \&.Pa /usr/share/man/man7/mdoc.7
   .Pp
   See also
   .Sx \&Lk .
 .Ss \&Pc  .Ss \&Pc
   Close parenthesised context opened by
   .Sx \&Po .
 .Ss \&Pf  .Ss \&Pf
   Removes the space between its argument
   .Pq Dq prefix
   and the following macro.
   Its syntax is as follows:
   .Pp
   .D1 .Pf Ar prefix macro arguments ...
   .Pp
   This is equivalent to:
   .Pp
   .D1 .No Ar prefix No \&Ns Ar macro arguments ...
   .Pp
   Examples:
   .Dl ".Pf $ Ar variable_name"
   .Dl ".Pf 0x Ar hex_digits"
   .Pp
   See also
   .Sx \&Ns
   and
   .Sx \&Sm .
 .Ss \&Po  .Ss \&Po
   Multi-line version of
   .Sx \&Pq .
 .Ss \&Pp  .Ss \&Pp
   Break a paragraph.
   This will assert vertical space between prior and subsequent macros
   and/or text.
   .Pp
   Paragraph breaks are not needed before or after
   .Sx \&Sh
   or
   .Sx \&Ss
   macros or before displays
   .Pq Sx \&Bd
   or lists
   .Pq Sx \&Bl
   unless the
   .Fl compact
   flag is given.
 .Ss \&Pq  .Ss \&Pq
   Parenthesised enclosure.
   .Pp
   See also
   .Sx \&Po .
 .Ss \&Qc  .Ss \&Qc
   Close quoted context opened by
   .Sx \&Qo .
 .Ss \&Ql  .Ss \&Ql
   Format a single-quoted literal.
   See also
   .Sx \&Qq
   and
   .Sx \&Sq .
 .Ss \&Qo  .Ss \&Qo
   Multi-line version of
   .Sx \&Qq .
 .Ss \&Qq  .Ss \&Qq
   Encloses its arguments in
   .Qq typewriter
   double-quotes.
   Consider using
   .Sx \&Dq .
   .Pp
   See also
   .Sx \&Dq ,
   .Sx \&Sq ,
   and
   .Sx \&Qo .
 .Ss \&Re  .Ss \&Re
 Closes a  Close an
 .Sx \&Rs  .Sx \&Rs
 block.  block.
 Does not have any tail arguments.  Does not have any tail arguments.
 .Ss \&Rs  .Ss \&Rs
 Begins a bibliographic  Begin a bibliographic
 .Pq Dq reference  .Pq Dq reference
 block.  block.
 Does not have any head arguments.  Does not have any head arguments.
Line 1911  The block macro may only contain
Line 2822  The block macro may only contain
 .Sx \&%Q ,  .Sx \&%Q ,
 .Sx \&%R ,  .Sx \&%R ,
 .Sx \&%T ,  .Sx \&%T ,
   .Sx \&%U ,
 and  and
 .Sx \&%V  .Sx \&%V
 child macros (at least one must be specified).  child macros (at least one must be specified).
Line 1933  block is used within a SEE ALSO section, a vertical sp
Line 2845  block is used within a SEE ALSO section, a vertical sp
 before the rendered output, else the block continues on the current  before the rendered output, else the block continues on the current
 line.  line.
 .Ss \&Rv  .Ss \&Rv
   Insert a standard sentence regarding a function call's return value of 0
   on success and \-1 on error, with the
   .Va errno
   libc global variable set on error.
   Its syntax is as follows:
   .Pp
   .D1 Pf \. Sx \&Rv Fl std Op Ar function ...
   .Pp
   If
   .Ar function
   is not specified, the document's name set by
   .Sx \&Nm
   is used.
   Multiple
   .Ar function
   arguments are treated as separate functions.
   .Pp
   See also
   .Sx \&Ex .
 .Ss \&Sc  .Ss \&Sc
   Close single-quoted context opened by
   .Sx \&So .
 .Ss \&Sh  .Ss \&Sh
   Begin a new section.
   For a list of conventional manual sections, see
   .Sx MANUAL STRUCTURE .
   These sections should be used unless it's absolutely necessary that
   custom sections be used.
   .Pp
   Section names should be unique so that they may be keyed by
   .Sx \&Sx .
   Although this macro is parsed, it should not consist of child node or it
   may not be linked with
   .Sx \&Sx .
   .Pp
   See also
   .Sx \&Pp ,
   .Sx \&Ss ,
   and
   .Sx \&Sx .
 .Ss \&Sm  .Ss \&Sm
   Switches the spacing mode for output generated from macros.
   Its syntax is as follows:
   .Pp
   .D1 Pf \. Sx \&Sm Cm on | off
   .Pp
   By default, spacing is
   .Cm on .
   When switched
   .Cm off ,
   no white space is inserted between macro arguments and between the
   output generated from adjacent macros, but text lines
   still get normal spacing between words and sentences.
 .Ss \&So  .Ss \&So
   Multi-line version of
   .Sx \&Sq .
 .Ss \&Sq  .Ss \&Sq
   Encloses its arguments in
   .Sq typewriter
   single-quotes.
   .Pp
   See also
   .Sx \&Dq ,
   .Sx \&Qq ,
   and
   .Sx \&So .
 .Ss \&Ss  .Ss \&Ss
   Begin a new subsection.
   Unlike with
   .Sx \&Sh ,
   there is no convention for the naming of subsections.
   Except
   .Em DESCRIPTION ,
   the conventional sections described in
   .Sx MANUAL STRUCTURE
   rarely have subsections.
   .Pp
   Sub-section names should be unique so that they may be keyed by
   .Sx \&Sx .
   Although this macro is parsed, it should not consist of child node or it
   may not be linked with
   .Sx \&Sx .
   .Pp
   See also
   .Sx \&Pp ,
   .Sx \&Sh ,
   and
   .Sx \&Sx .
 .Ss \&St  .Ss \&St
   Replace an abbreviation for a standard with the full form.
   The following standards are recognised:
   .Pp
   .Bl -tag -width "-p1003.1g-2000X" -compact
   .It \-p1003.1-88
   .St -p1003.1-88
   .It \-p1003.1-90
   .St -p1003.1-90
   .It \-p1003.1-96
   .St -p1003.1-96
   .It \-p1003.1-2001
   .St -p1003.1-2001
   .It \-p1003.1-2004
   .St -p1003.1-2004
   .It \-p1003.1-2008
   .St -p1003.1-2008
   .It \-p1003.1
   .St -p1003.1
   .It \-p1003.1b
   .St -p1003.1b
   .It \-p1003.1b-93
   .St -p1003.1b-93
   .It \-p1003.1c-95
   .St -p1003.1c-95
   .It \-p1003.1g-2000
   .St -p1003.1g-2000
   .It \-p1003.1i-95
   .St -p1003.1i-95
   .It \-p1003.2-92
   .St -p1003.2-92
   .It \-p1003.2a-92
   .St -p1003.2a-92
   .It \-p1387.2-95
   .St -p1387.2-95
   .It \-p1003.2
   .St -p1003.2
   .It \-p1387.2
   .St -p1387.2
   .It \-isoC
   .St -isoC
   .It \-isoC-90
   .St -isoC-90
   .It \-isoC-amd1
   .St -isoC-amd1
   .It \-isoC-tcor1
   .St -isoC-tcor1
   .It \-isoC-tcor2
   .St -isoC-tcor2
   .It \-isoC-99
   .St -isoC-99
   .It \-iso9945-1-90
   .St -iso9945-1-90
   .It \-iso9945-1-96
   .St -iso9945-1-96
   .It \-iso9945-2-93
   .St -iso9945-2-93
   .It \-ansiC
   .St -ansiC
   .It \-ansiC-89
   .St -ansiC-89
   .It \-ansiC-99
   .St -ansiC-99
   .It \-ieee754
   .St -ieee754
   .It \-iso8802-3
   .St -iso8802-3
   .It \-iso8601
   .St -iso8601
   .It \-ieee1275-94
   .St -ieee1275-94
   .It \-xpg3
   .St -xpg3
   .It \-xpg4
   .St -xpg4
   .It \-xpg4.2
   .St -xpg4.2
   .It \-xpg4.3
   .St -xpg4.3
   .It \-xbd5
   .St -xbd5
   .It \-xcu5
   .St -xcu5
   .It \-xsh5
   .St -xsh5
   .It \-xns5
   .St -xns5
   .It \-xns5.2
   .St -xns5.2
   .It \-xns5.2d2.0
   .St -xns5.2d2.0
   .It \-xcurses4.2
   .St -xcurses4.2
   .It \-susv2
   .St -susv2
   .It \-susv3
   .St -susv3
   .It \-svid4
   .St -svid4
   .El
 .Ss \&Sx  .Ss \&Sx
   Reference a section or subsection in the same manual page.
   The referenced section or subsection name must be identical to the
   enclosed argument, including whitespace.
   .Pp
   Examples:
   .Dl \&.Sx MANUAL STRUCTURE
   .Pp
   See also
   .Sx \&Sh
   and
   .Sx \&Ss .
 .Ss \&Sy  .Ss \&Sy
   Format enclosed arguments in symbolic
   .Pq Dq boldface .
   Note that this is a presentation term and should not be used for
   stylistically decorating technical terms.
   .Pp
   See also
   .Sx \&Bf ,
   .Sx \&Em ,
   .Sx \&Li ,
   and
   .Sx \&No .
   .Ss \&Ta
   Table cell separator in
   .Sx \&Bl Fl column
   lists; can only be used below
   .Sx \&It .
 .Ss \&Tn  .Ss \&Tn
   Format a tradename.
   .Pp
   Since this macro is often implemented to use a small caps font,
   it has historically been used for acronyms (like ASCII) as well.
   Such usage is not recommended because it would use the same macro
   sometimes for semantical annotation, sometimes for physical formatting.
   .Pp
   Examples:
   .Dl \&.Tn IBM
 .Ss \&Ud  .Ss \&Ud
 Prints out  Prints out
 .Dq currently under development.  .Dq currently under development.
Line 1951  Format the UNIX name.
Line 3080  Format the UNIX name.
 Accepts no argument.  Accepts no argument.
 .Pp  .Pp
 Examples:  Examples:
 .D1 \&.Ux  .Dl \&.Ux
 .Pp  .Pp
 See also  See also
 .Sx \&At ,  .Sx \&At ,
Line 1963  See also
Line 3092  See also
 and  and
 .Sx \&Ox .  .Sx \&Ox .
 .Ss \&Va  .Ss \&Va
   A variable name.
   .Pp
   Examples:
   .Dl \&.Va foo
   .Dl \&.Va const char *bar ;
 .Ss \&Vt  .Ss \&Vt
 A variable type.  A variable type.
 This is also used for indicating global variables in the SYNOPSIS  This is also used for indicating global variables in the
   .Em SYNOPSIS
 section, in which case a variable name is also specified.  section, in which case a variable name is also specified.
 Note that it accepts  Note that it accepts
 .Sx Block partial-implicit  .Sx Block partial-implicit
 syntax when invoked as the first macro in the SYNOPSIS section, else it  syntax when invoked as the first macro on an input line in the
 accepts ordinary  .Em SYNOPSIS
   section, else it accepts ordinary
 .Sx In-line  .Sx In-line
 syntax.  syntax.
   In the former case, this macro starts a new output line,
   and a blank line is inserted in front if there is a preceding
   function definition or include directive.
 .Pp  .Pp
 Note that this should not be confused with  Note that this should not be confused with
 .Sx \&Ft ,  .Sx \&Ft ,
 which is used for function return types.  which is used for function return types.
 .Pp  .Pp
 Examples:  Examples:
 .D1 \&.Vt unsigned char  .Dl \&.Vt unsigned char
 .D1 \&.Vt extern const char * const sys_signame[] ;  .Dl \&.Vt extern const char * const sys_signame[] \&;
 .Pp  .Pp
 See also  See also
 .Sx \&Ft  .Sx MANUAL STRUCTURE
 and  and
 .Sx \&Va .  .Sx \&Va .
 .Ss \&Xc  .Ss \&Xc
 Close a scope opened by  Close a scope opened by
 .Sx \&Xo .  .Sx \&Xo .
 .Ss \&Xo  .Ss \&Xo
 Open an extension scope.  Extend the header of an
 This macro originally existed to extend the 9-argument limit of troff;  .Sx \&It
 since this limit has been lifted, the macro has been deprecated.  macro or the body of a partial-implicit block macro
   beyond the end of the input line.
   This macro originally existed to work around the 9-argument limit
   of historic
   .Xr roff 7 .
 .Ss \&Xr  .Ss \&Xr
 Link to another manual  Link to another manual
 .Pq Qq cross-reference .  .Pq Qq cross-reference .
 Its calling syntax is  Its syntax is as follows:
 .Pp  .Pp
 .D1 \. Ns Sx \&Xr Cm name section  .D1 Pf \. Sx \&Xr Ar name section
 .Pp  .Pp
 The  The
 .Cm name  .Ar name
 and  and
 .Cm section  .Ar section
 are the name and section of the linked manual.  are the name and section of the linked manual.
 If  If
 .Cm section  .Ar section
 is followed by non-punctuation, an  is followed by non-punctuation, an
 .Sx \&Ns  .Sx \&Ns
 is inserted into the token stream.  is inserted into the token stream.
 This behaviour is for compatibility with  This behaviour is for compatibility with
 .Xr groff 1 .  GNU troff.
 .Pp  .Pp
 Examples:  Examples:
 .D1 \&.Xr mandoc 1  .Dl \&.Xr mandoc 1
 .D1 \&.Xr mandoc 1 ;  .Dl \&.Xr mandoc 1 \&;
 .D1 \&.Xr mandoc 1 \&Ns s behaviour  .Dl \&.Xr mandoc 1 \&Ns s behaviour
 .Ss \&br  .Ss \&br
   Emits a line-break.
   This macro should not be used; it is implemented for compatibility with
   historical manuals.
   .Pp
   Consider using
   .Sx \&Pp
   in the event of natural paragraph breaks.
 .Ss \&sp  .Ss \&sp
   Emits vertical space.
   This macro should not be used; it is implemented for compatibility with
   historical manuals.
   Its syntax is as follows:
   .Pp
   .D1 Pf \. Sx \&sp Op Ar height
   .Pp
   The
   .Ar height
   argument must be formatted as described in
   .Sx Scaling Widths .
   If unspecified,
   .Sx \&sp
   asserts a single vertical space.
 .Sh COMPATIBILITY  .Sh COMPATIBILITY
 This section documents compatibility between mandoc and other other  This section documents compatibility between mandoc and other other
 troff implementations, at this time limited to GNU troff  troff implementations, at this time limited to GNU troff
 .Pq Qq groff .  .Pq Qq groff .
 The term  The term
 .Qq historic groff  .Qq historic groff
 refers to groff versions before the  refers to groff versions before 1.17,
   which featured a significant update of the
 .Pa doc.tmac  .Pa doc.tmac
 file re-write  file.
 .Pq somewhere between 1.15 and 1.19 .  
 .Pp  .Pp
 Heirloom troff, the other significant troff implementation accepting  Heirloom troff, the other significant troff implementation accepting
 \-mdoc, is similar to historic groff.  \-mdoc, is similar to historic groff.
 .Pp  .Pp
   The following problematic behaviour is found in groff:
   .ds hist (Historic groff only.)
   .Pp
 .Bl -dash -compact  .Bl -dash -compact
 .It  .It
 groff does not accept the  Display macros
 .Sq \&Ta  .Po
 pseudo-macro as a line macro.  .Sx \&Bd ,
 mandoc does.  .Sx \&Dl ,
   and
   .Sx \&D1
   .Pc
   may not be nested.
   \*[hist]
 .It  .It
 The comment syntax  .Sx \&At
 .Sq \e."  with unknown arguments produces no output at all.
 is no longer accepted.  \*[hist]
   Newer groff and mandoc print
   .Qq AT&T UNIX
   and the arguments.
 .It  .It
 In groff, the  .Sx \&Bl Fl column
 .Sx \&Pa  does not recognise trailing punctuation characters when they immediately
 macro does not format its arguments when used in the FILES section under  precede tabulator characters, but treats them as normal text and
 certain list types.  outputs a space before them.
 mandoc does.  
 .It  .It
 Historic groff does not print a dash for empty  .Sx \&Bd Fl ragged compact
 .Sx \&Fl  does not start a new line.
 arguments.  \*[hist]
 mandoc and newer groff implementations do.  
 .It  .It
 groff behaves irregularly when specifying  .Sx \&Dd
 .Sq \ef  with non-standard arguments behaves very strangely.
 .Sx Text Decoration  When there are three arguments, they are printed verbatim.
 within line-macro scopes.  Any other number of arguments is replaced by the current date,
 mandoc follows a consistent system.  but without any arguments the string
   .Dq Epoch
   is printed.
 .It  .It
 In mandoc, negative scaling units are truncated to zero; groff would  .Sx \&Fl
 move to prior lines.  does not print a dash for an empty argument.
 Furthermore, the  \*[hist]
 .Sq f  
 scaling unit, while accepted, is rendered as the default unit.  
 .It  .It
 In quoted literals, groff allowed pair-wise double-quotes to produce a  .Sx \&Fn
 standalone double-quote in formatted output.  does not start a new line unless invoked as the line macro in the
 This idiosyncratic behaviour is not applicable in mandoc.  .Em SYNOPSIS
   section.
   \*[hist]
 .It  .It
 Display types  .Sx \&Fo
 .Sx \&Bd  with
 .Fl center  .Pf non- Sx \&Fa
   children causes inconsistent spacing between arguments.
   In mandoc, a single space is always inserted between arguments.
   .It
   .Sx \&Ft
   in the
   .Em SYNOPSIS
   causes inconsistent vertical spacing, depending on whether a prior
   .Sx \&Fn
   has been invoked.
   See
   .Sx \&Ft
 and  and
 .Fl right  .Sx \&Fn
 are aliases for  for the normalised behaviour in mandoc.
 .Fl left  
 in manodc.  Furthermore, the  
 .Fl file Ar file  
 argument is ignored.  
 Lastly, since text is not right-justified in mandoc (or even groff),  
 .Fl ragged  
 and  
 .Fl filled  
 are aliases, as are  
 .Fl literal  
 and  
 .Fl unfilled .  
 .It  .It
 Historic groff has many un-callable macros.  .Sx \&In
 Most of these (excluding some block-level macros) are now callable.  ignores additional arguments and is not treated specially in the
   .Em SYNOPSIS .
   \*[hist]
 .It  .It
 The vertical bar  .Sx \&It
 .Sq \(ba  sometimes requires a
 made historic groff  .Fl nested
 .Qq go orbital  flag.
 but has been a proper delimiter since then.  \*[hist]
 .It  In new groff and mandoc, any list may be nested by default and
 .Sx \&It Fl nested  
 is assumed for all lists (it wasn't in historic groff): any list may be  
 nested and  
 .Fl enum  .Fl enum
 lists will restart the sequence only for the sub-list.  lists will restart the sequence only for the sub-list.
 .It  .It
 Some manuals use  
 .Sx \&Li  .Sx \&Li
 incorrectly by following it with a reserved character and expecting the  followed by a delimiter is incorrectly used in some manuals
 delimiter to render.  instead of properly quoting that character, which sometimes works with
 This is not supported in mandoc.  historic groff.
 .It  .It
 In groff, the  .Sx \&Lk
 .Sx \&Fo  only accepts a single link-name argument; the remainder is misformatted.
 macro only produces the first parameter.  
 This is not the case in mandoc.  
 .It  .It
 In groff, the  .Sx \&Pa
 .Sx \&Cd ,  does not format its arguments when used in the FILES section under
 .Sx \&Er ,  certain list types.
 .Sx \&Ex ,  .It
   .Sx \&Ta
   can only be called by other macros, but not at the beginning of a line.
   .It
   .Sx \&%C
   is not implemented.
   .It
   Historic groff only allows up to eight or nine arguments per macro input
   line, depending on the exact situation.
   Providing more arguments causes garbled output.
   The number of arguments on one input line is not limited with mandoc.
   .It
   Historic groff has many un-callable macros.
   Most of these (excluding some block-level macros) are callable
   in new groff and mandoc.
   .It
   .Sq \(ba
   (vertical bar) is not fully supported as a delimiter.
   \*[hist]
   .It
   .Sq \ef
   .Pq font face
 and  and
 .Sx \&Rv  .Sq \ef
 macros were stipulated only to occur in certain manual sections.  .Pq font family face
 mandoc does not have these restrictions.  .Sx Text Decoration
   escapes behave irregularly when specified within line-macro scopes.
 .It  .It
 Newer groff and mandoc print  Negative scaling units return to prior lines.
 .Qq AT&T UNIX  Instead, mandoc truncates them to zero.
 prior to unknown arguments of  
 .Sx \&At ;  
 older groff did nothing.  
 .El  .El
   .Pp
   The following features are unimplemented in mandoc:
   .Pp
   .Bl -dash -compact
   .It
   .Sx \&Bd
   .Fl file Ar file .
   .It
   .Sx \&Bd
   .Fl offset Ar center
   and
   .Fl offset Ar right .
   Groff does not implement centred and flush-right rendering either,
   but produces large indentations.
   .It
   The
   .Sq \eh
   .Pq horizontal position ,
   .Sq \ev
   .Pq vertical position ,
   .Sq \em
   .Pq text colour ,
   .Sq \eM
   .Pq text filling colour ,
   .Sq \ez
   .Pq zero-length character ,
   .Sq \ew
   .Pq string length ,
   .Sq \ek
   .Pq horizontal position marker ,
   .Sq \eo
   .Pq text overstrike ,
   and
   .Sq \es
   .Pq text size
   escape sequences are all discarded in mandoc.
   .It
   The
   .Sq \ef
   scaling unit is accepted by mandoc, but rendered as the default unit.
   .It
   In quoted literals, groff allows pairwise double-quotes to produce a
   standalone double-quote in formatted output.
   This is not supported by mandoc.
   .El
 .Sh SEE ALSO  .Sh SEE ALSO
   .Xr man 1 ,
 .Xr mandoc 1 ,  .Xr mandoc 1 ,
 .Xr mandoc_char 7  .Xr eqn 7 ,
   .Xr man 7 ,
   .Xr mandoc_char 7 ,
   .Xr roff 7 ,
   .Xr tbl 7
   .Sh HISTORY
   The
   .Nm
   language first appeared as a troff macro package in
   .Bx 4.4 .
   It was later significantly updated by Werner Lemberg and Ruslan Ermilov
   in groff-1.17.
   The standalone implementation that is part of the
   .Xr mandoc 1
   utility written by Kristaps Dzonsons appeared in
   .Ox 4.6 .
 .Sh AUTHORS  .Sh AUTHORS
 The  The
 .Nm  .Nm
 reference was written by  reference was written by
 .An Kristaps Dzonsons Aq kristaps@bsd.lv .  .An Kristaps Dzonsons ,
 .\"  .Mt kristaps@bsd.lv .
 .\" XXX: this really isn't the place for these caveats.  
 .\" .  
 .\" .  
 .\" .Sh CAVEATS  
 .\" There are many ambiguous parts of mdoc.  
 .\" .  
 .\" .Pp  
 .\" .Bl -dash -compact  
 .\" .It  
 .\" .Sq \&Fa  
 .\" should be  
 .\" .Sq \&Va  
 .\" as function arguments are variables.  
 .\" .It  
 .\" .Sq \&Ft  
 .\" should be  
 .\" .Sq \&Vt  
 .\" as function return types are still types.  Furthermore, the  
 .\" .Sq \&Ft  
 .\" should be removed and  
 .\" .Sq \&Fo ,  
 .\" which ostensibly follows it, should follow the same convention as  
 .\" .Sq \&Va .  
 .\" .It  
 .\" .Sq \&Va  
 .\" should formalise that only one or two arguments are acceptable: a  
 .\" variable name and optional, preceding type.  
 .\" .It  
 .\" .Sq \&Fd  
 .\" is ambiguous.  It's commonly used to indicate an include file in the  
 .\" synopsis section.  
 .\" .Sq \&In  
 .\" should be used, instead.  
 .\" .It  
 .\" Only the  
 .\" .Sq \-literal  
 .\" argument to  
 .\" .Sq \&Bd  
 .\" makes sense.  The remaining ones should be removed.  
 .\" .It  
 .\" The  
 .\" .Sq \&Xo  
 .\" and  
 .\" .Sq \&Xc  
 .\" macros should be deprecated.  
 .\" .It  
 .\" The  
 .\" .Sq \&Dt  
 .\" macro lacks clarity.  It should be absolutely clear which title will  
 .\" render when formatting the manual page.  
 .\" .It  
 .\" A  
 .\" .Sq \&Lx  
 .\" should be provided for Linux (\(`a la  
 .\" .Sq \&Ox ,  
 .\" .Sq \&Nx  
 .\" etc.).  
 .\" .It  
 .\" There's no way to refer to references in  
 .\" .Sq \&Rs/Re  
 .\" blocks.  
 .\" .It  
 .\" The \-split and \-nosplit dictates via  
 .\" .Sq \&An  
 .\" are re-set when entering and leaving the AUTHORS section.  
 .\" .El  
 .\" .  
Legend:
Removed from v.1.117  
changed lines
  Added in v.1.210
CVSweb