=================================================================== RCS file: /cvs/mandoc/mdoc.7,v retrieving revision 1.98 retrieving revision 1.145 diff -u -p -r1.98 -r1.145 --- mandoc/mdoc.7 2010/05/08 22:26:39 1.98 +++ mandoc/mdoc.7 2010/08/07 09:56:12 1.145 @@ -1,6 +1,7 @@ -.\" $Id: mdoc.7,v 1.98 2010/05/08 22:26:39 kristaps Exp $ +.\" $Id: mdoc.7,v 1.145 2010/08/07 09:56:12 kristaps Exp $ .\" -.\" Copyright (c) 2009 Kristaps Dzonsons +.\" Copyright (c) 2009, 2010 Kristaps Dzonsons +.\" Copyright (c) 2010 Ingo Schwarze .\" .\" Permission to use, copy, modify, and distribute this software for any .\" purpose with or without fee is hereby granted, provided that the above @@ -14,7 +15,7 @@ .\" ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF .\" OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. .\" -.Dd $Mdocdate: May 8 2010 $ +.Dd $Mdocdate: August 7 2010 $ .Dt MDOC 7 .Os .Sh NAME @@ -26,17 +27,22 @@ The language is used to format .Bx .Ux -manuals. In this reference document, we describe its syntax, structure, -and usage. Our reference implementation is mandoc; the +manuals. +This reference document describes its syntax, structure, and +usage. +The reference implementation is +.Xr mandoc 1 ; +the .Sx COMPATIBILITY section describes compatibility with other troff \-mdoc implementations. .Pp An .Nm -document follows simple rules: lines beginning with the control +document follows simple rules: lines beginning with the control character .Sq \. -are parsed for macros. Other lines are interpreted within the scope of +are parsed for macros. +Other lines are interpreted within the scope of prior macros: .Bd -literal -offset indent \&.Sh Macro lines change control state. @@ -45,18 +51,20 @@ Other lines are interpreted within the current state. .Sh LANGUAGE SYNTAX .Nm documents may contain only graphable 7-bit ASCII characters, the space -character, and, in certain circumstances, the tab character. All -manuals must have +character, and, in certain circumstances, the tab character. +All manuals must have .Ux line terminators. .Ss Comments Text following a -.Sq \e" , +.Sq \e\*q , whether in a macro or free-form text line, is ignored to the end of -line. A macro line with only a control character and comment escape, -.Sq \&.\e" , -is also ignored. Macro lines with only a control charater and optionally -whitespace are stripped from input. +line. +A macro line with only a control character and comment escape, +.Sq \&.\e\*q , +is also ignored. +Macro lines with only a control character and optional whitespace are +stripped from input. .Ss Reserved Characters Within a macro line, the following characters are reserved: .Pp @@ -87,10 +95,10 @@ Within a macro line, the following characters are rese .Pp Use of reserved characters is described in .Sx MACRO SYNTAX . -For general use in macro lines, these characters must either be escaped +For general use in macro lines, these characters can either be escaped with a non-breaking space .Pq Sq \e& -or, if applicable, an appropriate escape sequence used. +or, if applicable, an appropriate escape sequence can be used. .Ss Special Characters Special characters may occur in both macro and free-form lines. Sequences begin with the escape character @@ -101,9 +109,11 @@ for two-character sequences; an open-bracket .Sq \&[ for n-character sequences (terminated at a close-bracket .Sq \&] ) ; -or a single one-character sequence. See +or a single one character sequence. +See .Xr mandoc_char 7 -for a complete list. Examples include +for a complete list. +Examples include .Sq \e(em .Pq em-dash and @@ -112,58 +122,39 @@ and .Ss Text Decoration Terms may be text-decorated using the .Sq \ef -escape followed by an indicator: B (bold), I, (italic), R (Roman), or P +escape followed by an indicator: B (bold), I (italic), R (Roman), or P (revert to previous mode): .Pp .D1 \efBbold\efR \efIitalic\efP .Pp A numerical representation 3, 2, or 1 (bold, italic, and Roman, -respectively) may be used instead. A text decoration is valid within -the current font scope only: if a macro opens a font scope alongside +respectively) may be used instead. +A text decoration is valid within +the current font scope only: if a macro opens a font scope alongside its own scope, such as .Sx \&Bf .Cm \&Sy , in-scope invocations of .Sq \ef -are only valid within the font scope of the macro. If +are only valid within the font scope of the macro. +If .Sq \ef is specified outside of any font scope, such as in unenclosed, free-form text, it will affect the remainder of the document. .Pp -Text may also be sized with the -.Sq \es -escape, whose syntax is one of -.Sq \es+-n -for one-digit numerals; -.Sq \es(+-nn -or -.Sq \es+-(nn -for two-digit numerals; and -.Sq \es[+-N] , -.Sq \es+-[N] , -.Sq \es'+-N' , -or -.Sq \es+-'N' -for arbitrary-digit numerals: -.Pp -.D1 \es+1bigger\es-1 -.D1 \es[+10]much bigger\es[-10] -.D1 \es+(10much bigger\es-(10 -.D1 \es+'100'much much bigger\es-'100' -.Pp -Note these forms are +Note this form is .Em not recommended for .Nm , which encourages semantic annotation. .Ss Predefined Strings Historically, -.Xr groff 1 +troff also defined a set of package-specific .Dq predefined strings , which, like .Sx Special Characters , -demark special output characters and strings by way of input codes. +mark special output characters and strings by way of input codes. Predefined strings are escaped with the slash-asterisk, .Sq \e* : single-character @@ -174,7 +165,8 @@ and N-character .Sq \e*[N] . See .Xr mandoc_char 7 -for a complete list. Examples include +for a complete list. +Examples include .Sq \e*(Am .Pq ampersand and @@ -182,47 +174,44 @@ and .Pq vertical bar . .Ss Whitespace Whitespace consists of the space character. -In free-form lines, whitespace is preserved within a line; un-escaped +In free-form lines, whitespace is preserved within a line; unescaped trailing spaces are stripped from input (unless in a literal context). Blank free-form lines, which may include whitespace, are only permitted within literal contexts. .Pp -In macro lines, whitespace delimits arguments and is discarded. If -arguments are quoted, whitespace within the quotes is retained. +In macro lines, whitespace delimits arguments and is discarded. +If arguments are quoted, whitespace within the quotes is retained. .Ss Quotation -Macro arguments may be quoted with a double-quote to group -space-delimited terms or to retain blocks of whitespace. A quoted -argument begins with a double-quote preceded by whitespace. The next -double-quote not pair-wise adjacent to another double-quote terminates -the literal, regardless of surrounding whitespace. +Macro arguments may be quoted with double-quotes to group +space-delimited terms or to retain blocks of whitespace. +A quoted argument begins with a double-quote preceded by whitespace. +The next double-quote not pairwise adjacent to another double-quote +terminates the literal, regardless of surrounding whitespace. .Pp -This produces tokens -.Sq a" , -.Sq b c , -.Sq de , -and -.Sq fg" . -Note that any quoted term, be it argument or macro, is indiscriminately -considered literal text. Thus, the following produces -.Sq \&Em a : +Note that any quoted text, even if it would cause a macro invocation +when unquoted, is considered literal text. +Thus, the following produces +.Sq Op "Fl a" : .Bd -literal -offset indent -\&.Em "Em a" +\&.Op "Fl a" .Ed .Pp In free-form mode, quotes are regarded as opaque text. .Ss Dates There are several macros in .Nm -that require a date argument. The canonical form for dates is the -American format: +that require a date argument. +The canonical form for dates is the American format: .Pp .D1 Cm Month Day , Year .Pp The .Cm Day -value is an optionally zero-padded numeral. The +value is an optionally zero-padded numeral. +The .Cm Month -value is the full month name. The +value is the full month name. +The .Cm Year value is the full four-digit year. .Pp @@ -246,8 +235,8 @@ stipulating a two-inch list indentation with the follo The syntax for scaled widths is .Sq Li [+-]?[0-9]*.[0-9]*[:unit:] , where a decimal must be preceded or proceeded by at least one digit. -Negative numbers, while accepted, are truncated to zero. The following -scaling units are accepted: +Negative numbers, while accepted, are truncated to zero. +The following scaling units are accepted: .Pp .Bl -tag -width Ds -offset indent -compact .It c @@ -285,20 +274,39 @@ Using anything other than .Sq u , or .Sq v -is necessarily non-portable across output media. See +is necessarily non-portable across output media. +See .Sx COMPATIBILITY . +.Ss Sentence Spacing +When composing a manual, make sure that sentences end at the end of +a line. +By doing so, front-ends will be able to apply the proper amount of +spacing after the end of sentence (unescaped) period, exclamation mark, +or question mark followed by zero or more non-sentence closing +delimiters ( +.Ns Sq \&) , +.Sq \&] , +.Sq \&' , +.Sq \&" ) . +.Pp +The proper spacing is also intelligently preserved if a sentence ends at +the boundary of a macro line. +For example: +.Pp +.D1 \&Xr mandoc 1 \. +.D1 \&Fl T \&Ns \&Cm ascii \. .Sh MANUAL STRUCTURE A well-formed .Nm document consists of a document prologue followed by one or more sections. .Pp -The prologue, which consists of (in order) the +The prologue, which consists of the .Sx \&Dd , .Sx \&Dt , and .Sx \&Os -macros, is required for every document. +macros in that order, is required for every document. .Pp The first section (sections are denoted by .Sx \&Sh ) @@ -307,8 +315,11 @@ must be the NAME section, consisting of at least one followed by .Sx \&Nd . .Pp -Following that, convention dictates specifying at least the SYNOPSIS and -DESCRIPTION sections, although this varies between manual sections. +Following that, convention dictates specifying at least the +.Em SYNOPSIS +and +.Em DESCRIPTION +sections, although this varies between manual sections. .Pp The following is a well-formed skeleton .Nm @@ -317,30 +328,27 @@ file: \&.Dd $\&Mdocdate$ \&.Dt mdoc 7 \&.Os -\&. \&.Sh NAME \&.Nm foo \&.Nd a description goes here -\&.\e\*q The next is for sections 2 & 3 only. +\&.\e\*q The next is for sections 2, 3, & 9 only. \&.\e\*q .Sh LIBRARY -\&. \&.Sh SYNOPSIS \&.Nm foo \&.Op Fl options \&.Ar -\&. \&.Sh DESCRIPTION The \&.Nm utility processes files ... \&.\e\*q .Sh IMPLEMENTATION NOTES -\&.\e\*q The next is for sections 1 & 8 only. -\&.\e\*q .Sh EXIT STATUS \&.\e\*q The next is for sections 2, 3, & 9 only. \&.\e\*q .Sh RETURN VALUES \&.\e\*q The next is for sections 1, 6, 7, & 8 only. \&.\e\*q .Sh ENVIRONMENT \&.\e\*q .Sh FILES +\&.\e\*q The next is for sections 1 & 8 only. +\&.\e\*q .Sh EXIT STATUS \&.\e\*q .Sh EXAMPLES \&.\e\*q The next is for sections 1, 4, 6, 7, & 8 only. \&.\e\*q .Sh DIAGNOSTICS @@ -356,19 +364,19 @@ utility processes files ... \&.\e\*q .Sh SECURITY CONSIDERATIONS .Ed .Pp -The sections in a +The sections in an .Nm -document are conventionally ordered as they appear above. Sections -should be composed as follows: +document are conventionally ordered as they appear above. +Sections should be composed as follows: .Bl -ohang -offset Ds .It Em NAME -The name(s) and a short description of the documented material. The -syntax for this as follows: +The name(s) and a one line description of the documented material. +The syntax for this as follows: .Bd -literal -offset indent -\&.Nm name0 -\&.Nm name1 +\&.Nm name0 , +\&.Nm name1 , \&.Nm name2 -\&.Nd a short description +\&.Nd a one line description .Ed .Pp The @@ -383,8 +391,8 @@ and .Sx \&Nd . .It Em LIBRARY The name of the library containing the documented material, which is -assumed to be a function in a section 2 or 3 manual. The syntax for -this is as follows: +assumed to be a function in a section 2, 3, or 9 manual. +The syntax for this is as follows: .Bd -literal -offset indent \&.Lb libarm .Ed @@ -427,17 +435,48 @@ And for the third, configurations (section 4): Manuals not in these sections generally don't need a .Em SYNOPSIS . .Pp -See -.Sx \&Op , +Some macros are displayed differently in the +.Em SYNOPSIS +section, particularly +.Sx \&Nm , .Sx \&Cd , +.Sx \&Fd , .Sx \&Fn , -.Sx \&Ft , +.Sx \&Fo , +.Sx \&In , +.Sx \&Vt , and -.Sx \&Vt . +.Sx \&Ft . +All of these macros are output on their own line. +If two such dissimilar macros are pairwise invoked (except for +.Sx \&Ft +before +.Sx \&Fo +or +.Sx \&Fn ) , +they are separated by a vertical space, unless in the case of +.Sx \&Fo , +.Sx \&Fn , +and +.Sx \&Ft , +which are always separated by vertical space. +.Pp +When text and macros following an +.Sx \&Nm +macro starting an input line span multiple output lines, +all output lines but the first will be indented to align +with the text immediately following the +.Sx \&Nm +macro, up to the next +.Sx \&Nm , +.Sx \&Sh , +or +.Sx \&Ss +macro or the end of an enclosing block, whichever comes first. .It Em DESCRIPTION -This expands upon the brief, one-line description in +This expands upon the brief, one line description in .Em NAME . -It usually contains a break-down of the options (if documenting a +It usually contains a breakdown of the options (if documenting a command), such as: .Bd -literal -offset indent The arguments are as follows: @@ -449,46 +488,47 @@ Print verbose information. .Pp Manuals not documenting a command won't include the above fragment. .It Em IMPLEMENTATION NOTES -Implementation-specific notes should be kept here. This is useful when -implementing standard functions that may have side effects or notable -algorithmic implications. -.It Em EXIT STATUS -Command exit status for section 1, 6, and 8 manuals. This section is -the dual of -.Em RETURN VALUES , -which is used for functions. Historically, this information was -described in -.Em DIAGNOSTICS , -a practise that is now discouraged. -.Pp -See -.Sx \&Ex . +Implementation-specific notes should be kept here. +This is useful when implementing standard functions that may have side +effects or notable algorithmic implications. .It Em RETURN VALUES -This section is the dual of -.Em EXIT STATUS , -which is used for commands. It documents the return values of functions -in sections 2, 3, and 9. +This section documents the +return values of functions in sections 2, 3, and 9. .Pp See .Sx \&Rv . .It Em ENVIRONMENT -Documents any usages of environment variables, e.g., -.Xr environ 7 . +Lists the environment variables used by the utility, +and explains the syntax and semantics of their values. +The +.Xr environ 7 +manual provides examples of typical content and formatting. .Pp See .Sx \&Ev . .It Em FILES -Documents files used. It's helpful to document both the file and a -short description of how the file is used (created, modified, etc.). +Documents files used. +It's helpful to document both the file name and a short description of how +the file is used (created, modified, etc.). .Pp See .Sx \&Pa . +.It Em EXIT STATUS +This section documents the +command exit status for section 1, 6, and 8 utilities. +Historically, this information was described in +.Em DIAGNOSTICS , +a practise that is now discouraged. +.Pp +See +.Sx \&Ex . .It Em EXAMPLES -Example usages. This often contains snippets of well-formed, -well-tested invocations. Make doubly sure that your examples work -properly! +Example usages. +This often contains snippets of well-formed, well-tested invocations. +Make sure that examples work properly! .It Em DIAGNOSTICS -Documents error conditions. This is most useful in section 4 manuals. +Documents error conditions. +This is most useful in section 4 manuals. Historically, this section was used in place of .Em EXIT STATUS for manuals in sections 1, 6, and 8; however, this practise is @@ -503,51 +543,53 @@ Documents error handling in sections 2, 3, and 9. See .Sx \&Er . .It Em SEE ALSO -References other manuals with related topics. This section should exist -for most manuals. Cross-references should conventionally be ordered -first by section, then alphabetically. +References other manuals with related topics. +This section should exist for most manuals. +Cross-references should conventionally be ordered first by section, then +alphabetically. .Pp See .Sx \&Xr . .It Em STANDARDS -References any standards implemented or used. If not adhering to any -standards, the +References any standards implemented or used. +If not adhering to any standards, the .Em HISTORY section should be used instead. .Pp See .Sx \&St . .It Em HISTORY -The history of any manual without a -.Em STANDARDS -section should be described in this section. +A brief history of the subject, including where support first appeared. .It Em AUTHORS -Credits to authors, if applicable, should appear in this section. -Authors should generally be noted by both name and an e-mail address. +Credits to the person or persons who wrote the code and/or documentation. +Authors should generally be noted by both name and email address. .Pp See .Sx \&An . .It Em CAVEATS -Explanations of common misuses and misunderstandings should be explained +Common misuses and misunderstandings should be explained in this section. .It Em BUGS -Extant bugs should be described in this section. +Known bugs, limitations and work-arounds should be described +in this section. .It Em SECURITY CONSIDERATIONS Documents any security precautions that operators should consider. .El .Sh MACRO SYNTAX Macros are one to three three characters in length and begin with a -control character , +control character, .Sq \&. , -at the beginning of the line. An arbitrary amount of whitespace may -sit between the control character and the macro name. Thus, the -following are equivalent: +at the beginning of the line. +An arbitrary amount of whitespace may sit between the control character +and the macro name. +Thus, the following are equivalent: .Bd -literal -offset indent \&.Pp \&.\ \ \ \&Pp .Ed .Pp -The syntax of a macro depends on its classification. In this section, +The syntax of a macro depends on its classification. +In this section, .Sq \-arg refers to macro arguments, which may be followed by zero or more .Sq parm @@ -560,24 +602,26 @@ closes it out. The .Em Callable column indicates that the macro may be called subsequent to the initial -line-macro. If a macro is not callable, then its invocation after the -initial line macro is interpreted as opaque text, such that +line-macro. +If a macro is not callable, then its invocation after the initial line +macro is interpreted as opaque text, such that .Sq \&.Fl \&Sh produces .Sq Fl \&Sh . .Pp The -.Em Parsable +.Em Parsed column indicates whether the macro may be followed by further -(ostensibly callable) macros. If a macro is not parsable, subsequent -macro invocations on the line will be interpreted as opaque text. +(ostensibly callable) macros. +If a macro is not parsed, subsequent macro invocations on the line +will be interpreted as opaque text. .Pp The .Em Scope column, if applicable, describes closure rules. .Ss Block full-explicit -Multi-line scope closed by an explicit closing macro. All macros -contains bodies; only +Multi-line scope closed by an explicit closing macro. +All macros contains bodies; only .Sx \&Bf contains a head. .Bd -literal -offset indent @@ -586,8 +630,8 @@ contains a head. \&.Yc .Ed .Pp -.Bl -column -compact -offset indent "MacroX" "CallableX" "ParsableX" "closed by XXX" -.It Em Macro Ta Em Callable Ta Em Parsable Ta Em Scope +.Bl -column -compact -offset indent "MacroX" "CallableX" "ParsedX" "closed by XXX" +.It Em Macro Ta Em Callable Ta Em Parsed Ta Em Scope .It Sx \&Bd Ta \&No Ta \&No Ta closed by Sx \&Ed .It Sx \&Bf Ta \&No Ta \&No Ta closed by Sx \&Ef .It Sx \&Bk Ta \&No Ta \&No Ta closed by Sx \&Ek @@ -609,7 +653,9 @@ All macros have bodies; some .Pc don't have heads; only one .Po -.Sx \&It Fl column +.Sx \&It +in +.Sx \&Bl Fl column .Pc has multiple heads. .Bd -literal -offset indent @@ -617,16 +663,27 @@ has multiple heads. \(lBbody...\(rB .Ed .Pp -.Bl -column -compact -offset indent "MacroX" "CallableX" "ParsableX" "closed by XXXXXXXXXXX" -.It Em Macro Ta Em Callable Ta Em Parsable Ta Em Scope +.Bl -column -compact -offset indent "MacroX" "CallableX" "ParsedX" "closed by XXXXXXXXXXX" +.It Em Macro Ta Em Callable Ta Em Parsed Ta Em Scope .It Sx \&It Ta \&No Ta Yes Ta closed by Sx \&It , Sx \&El .It Sx \&Nd Ta \&No Ta \&No Ta closed by Sx \&Sh +.It Sx \&Nm Ta \&No Ta Yes Ta closed by Sx \&Nm , Sx \&Sh , Sx \&Ss .It Sx \&Sh Ta \&No Ta \&No Ta closed by Sx \&Sh .It Sx \&Ss Ta \&No Ta \&No Ta closed by Sx \&Sh , Sx \&Ss .El +.Pp +Note that the +.Sx \&Nm +macro is a +.Sx Block full-implicit +macro only when invoked as the first macro +in a +.Em SYNOPSIS +section line, else it is +.Sx In-line . .Ss Block partial-explicit -Like block full-explicit, but also with single-line scope. Each -has at least a body and, in limited circumstances, a head +Like block full-explicit, but also with single-line scope. +Each has at least a body and, in limited circumstances, a head .Po .Sx \&Fo , .Sx \&Eo @@ -642,8 +699,8 @@ and/or tail \(lBbody...\(rB \&Yc \(lBtail...\(rB .Ed .Pp -.Bl -column "MacroX" "CallableX" "ParsableX" "closed by XXXX" -compact -offset indent -.It Em Macro Ta Em Callable Ta Em Parsable Ta Em Scope +.Bl -column "MacroX" "CallableX" "ParsedX" "closed by XXXX" -compact -offset indent +.It Em Macro Ta Em Callable Ta Em Parsed Ta Em Scope .It Sx \&Ac Ta Yes Ta Yes Ta opened by Sx \&Ao .It Sx \&Ao Ta Yes Ta Yes Ta closed by Sx \&Ac .It Sx \&Bc Ta Yes Ta Yes Ta closed by Sx \&Bo @@ -677,8 +734,8 @@ or end of line. \&.Yo \(lB\-arg \(lBval...\(rB\(rB \(lBbody...\(rB \(lBres...\(rB .Ed .Pp -.Bl -column "MacroX" "CallableX" "ParsableX" -compact -offset indent -.It Em Macro Ta Em Callable Ta Em Parsable +.Bl -column "MacroX" "CallableX" "ParsedX" -compact -offset indent +.It Em Macro Ta Em Callable Ta Em Parsed .It Sx \&Aq Ta Yes Ta Yes .It Sx \&Bq Ta Yes Ta Yes .It Sx \&Brq Ta Yes Ta Yes @@ -698,26 +755,28 @@ Note that the macro is a .Sx Block partial-implicit only when invoked as the first macro -in a SYNOPSIS section line, else it is +in a +.Em SYNOPSIS +section line, else it is .Sx In-line . .Ss In-line Closed by .Sx Reserved Characters , -end of line, fixed argument lengths, and/or subsequent macros. In-line -macros have only text children. If a number (or inequality) of -arguments is +end of line, fixed argument lengths, and/or subsequent macros. +In-line macros have only text children. +If a number (or inequality) of arguments is .Pq n , then the macro accepts an arbitrary number of arguments. .Bd -literal -offset indent -\&.Yo \(lB\-arg \(lBval...\(rB\(rB \(lBargs...\(rB \(lbres...\(rb +\&.Yo \(lB\-arg \(lBval...\(rB\(rB \(lBargs...\(rB \(lBres...\(rB \&.Yo \(lB\-arg \(lBval...\(rB\(rB \(lBargs...\(rB Yc... \&.Yo \(lB\-arg \(lBval...\(rB\(rB arg0 arg1 argN .Ed .Pp -.Bl -column "MacroX" "CallableX" "ParsableX" "Arguments" -compact -offset indent -.It Em Macro Ta Em Callable Ta Em Parsable Ta Em Arguments +.Bl -column "MacroX" "CallableX" "ParsedX" "Arguments" -compact -offset indent +.It Em Macro Ta Em Callable Ta Em Parsed Ta Em Arguments .It Sx \&%A Ta \&No Ta \&No Ta >0 .It Sx \&%B Ta \&No Ta \&No Ta >0 .It Sx \&%C Ta \&No Ta \&No Ta >0 @@ -743,7 +802,7 @@ then the macro accepts an arbitrary number of argument .It Sx \&Cd Ta Yes Ta Yes Ta >0 .It Sx \&Cm Ta Yes Ta Yes Ta n .It Sx \&Db Ta \&No Ta \&No Ta 1 -.It Sx \&Dd Ta \&No Ta \&No Ta >0 +.It Sx \&Dd Ta \&No Ta \&No Ta n .It Sx \&Dt Ta \&No Ta \&No Ta n .It Sx \&Dv Ta Yes Ta Yes Ta n .It Sx \&Dx Ta Yes Ta Yes Ta n @@ -795,19 +854,23 @@ then the macro accepts an arbitrary number of argument .El .Sh REFERENCE This section is a canonical reference of all macros, arranged -alphabetically. For the scoping of individual macros, see +alphabetically. +For the scoping of individual macros, see .Sx MACRO SYNTAX . .Ss \&%A Author name of an .Sx \&Rs -block. Multiple authors should each be accorded their own +block. +Multiple authors should each be accorded their own .Sx \%%A -line. Author names should be ordered with full or abbreviated -forename(s) first, then full surname. +line. +Author names should be ordered with full or abbreviated forename(s) +first, then full surname. .Ss \&%B Book title of an .Sx \&Rs -block. This macro may also be used in a non-bibliographic context when +block. +This macro may also be used in a non-bibliographic context when referring to book titles. .Ss \&%C Publication city or location of an @@ -820,8 +883,8 @@ this macro is not implemented in .Ss \&%D Publication date of an .Sx \&Rs -block. This should follow the reduced or canonical form syntax -described in +block. +This should follow the reduced or canonical form syntax described in .Sx Dates . .Ss \&%I Publisher or issuer name of an @@ -846,7 +909,8 @@ block. .Ss \&%Q Institutional author (school, government, etc.) of an .Sx \&Rs -block. Multiple institutional authors should each be accorded their own +block. +Multiple institutional authors should each be accorded their own .Sx \&%Q line. .Ss \&%R @@ -856,8 +920,9 @@ block. .Ss \&%T Article title of an .Sx \&Rs -block. This macro may also be used in a non-bibliographical context -when referring to article titles. +block. +This macro may also be used in a non-bibliographical context when +referring to article titles. .Ss \&%U URI of reference document. .Ss \&%V @@ -865,50 +930,51 @@ Volume number of an .Sx \&Rs block. .Ss \&Ac -Closes an +Close an .Sx \&Ao -block. Does not have any tail arguments. +block. +Does not have any tail arguments. .Ss \&Ad -Address construct: usually in the context of an computational address in -memory, not a physical (post) address. +Memory address. +Do not use this for postal addresses. .Pp Examples: .D1 \&.Ad [0,$] .D1 \&.Ad 0x00000000 .Ss \&An -Author name. This macro may alternatively accepts the following -arguments, although these may not be specified along with a parameter: -.Bl -tag -width 12n -offset indent +Author name. +Requires either the name of an author or one of the following arguments: +.Pp +.Bl -tag -width "-nosplitX" -offset indent -compact .It Fl split -Renders a line break before each author listing. +Start a new output line before each subsequent invocation of +.Sx \&An . .It Fl nosplit The opposite of .Fl split . .El .Pp -In the AUTHORS section, the default is not to split the first author -listing, but all subsequent author listings, whether or not they're -interspersed by other macros or text, are split. Thus, specifying +The default is +.Fl nosplit . +The effect of selecting either of the .Fl split -will cause the first listing also to be split. If not in the AUTHORS -section, the default is not to split. +modes ends at the beginning of the +.Em AUTHORS +section. +In the +.Em AUTHORS +section, the default is +.Fl nosplit +for the first author listing and +.Fl split +for all other author listings. .Pp Examples: .D1 \&.An -nosplit -.D1 \&.An J. D. Ullman . -.Pp -.Em Remarks : -the effects of -.Fl split -or -.Fl nosplit -are re-set when entering the AUTHORS section, so if one specifies -.Sx \&An Fl nosplit -in the general document body, it must be re-specified in the AUTHORS -section. +.D1 \&.An Kristaps Dzonsons \&Aq kristaps@bsd.lv .Ss \&Ao -Begins a block enclosed by angled brackets. Does not have any head -arguments. +Begin a block enclosed by angle brackets. +Does not have any head arguments. .Pp Examples: .D1 \&.Fl -key= \&Ns \&Ao \&Ar val \&Ac @@ -916,14 +982,14 @@ Examples: See also .Sx \&Aq . .Ss \&Ap -Inserts an apostrophe without any surrounding white-space. This is -generally used as a grammatic device when referring to the verb form of -a function: -.Bd -literal -offset indent -\&.Fn execve Ap d -.Ed +Inserts an apostrophe without any surrounding whitespace. +This is generally used as a grammatical device when referring to the verb +form of a function. +.Pp +Examples: +.D1 \&.Fn execve \&Ap d .Ss \&Aq -Encloses its arguments in angled brackets. +Encloses its arguments in angle brackets. .Pp Examples: .D1 \&.Fl -key= \&Ns \&Aq \&Ar val @@ -941,8 +1007,9 @@ statements, which should use See also .Sx \&Ao . .Ss \&Ar -Command arguments. If an argument is not provided, the string -.Dq file ... +Command arguments. +If an argument is not provided, the string +.Dq file ...\& is used as a default. .Pp Examples: @@ -950,17 +1017,19 @@ Examples: .D1 \&.Ar .D1 \&.Ar arg1 , arg2 . .Ss \&At -Formats an AT&T version. Accepts at most one parameter: -.Bl -tag -width 12n -offset indent +Formats an AT&T version. +Accepts one optional argument: +.Pp +.Bl -tag -width "v[1-7] | 32vX" -offset indent -compact .It Cm v[1-7] | 32v A version of .At . .It Cm V[.[1-4]]? -A system version of -.At . +A version of +.At V . .El .Pp -Note that these parameters do not begin with a hyphen. +Note that these arguments do not begin with a hyphen. .Pp Examples: .D1 \&.At @@ -976,79 +1045,93 @@ See also and .Sx \&Ux . .Ss \&Bc -Closes a +Close a .Sx \&Bo -block. Does not have any tail arguments. +block. +Does not have any tail arguments. .Ss \&Bd -Begins a display block. A display is collection of macros or text which -may be collectively offset or justified in a manner different from that -of the enclosing context. By default, the block is preceded by a -vertical space. +Begin a display block. +Its syntax is as follows: +.Bd -ragged -offset indent +.Pf \. Sx \&Bd +.Fl Ns Ar type +.Op Fl offset Ar width +.Op Fl compact +.Ed .Pp -Each display is associated with a type, which must be one of the -following arguments: -.Bl -tag -width 12n -offset indent -.It Fl ragged -Only left-justify the block. -.It Fl unfilled -Do not justify the block at all. +Display blocks are used to select a different indentation and +justification than the one used by the surrounding text. +They may contain both macro lines and free-form text lines. +By default, a display block is preceded by a vertical space. +.Pp +The +.Ar type +must be one of the following: +.Bl -tag -width 13n -offset indent +.It Fl centered +Centre-justify each line. +Using this display type is not recommended; many +.Nm +implementations render it poorly. .It Fl filled Left- and right-justify the block. .It Fl literal -Alias for -.Fl unfilled . -.It Fl centered -Centre-justify each line. +Do not justify the block at all. +Preserve white space as it appears in the input. +.It Fl ragged +Only left-justify the block. +.It Fl unfilled +An alias for +.Fl literal . .El .Pp -The type must be provided first. Secondary arguments are as follows: -.Bl -tag -width 12n -offset indent +The +.Ar type +must be provided first. +Additional arguments may follow: +.Bl -tag -width 13n -offset indent .It Fl offset Ar width -Offset by the value of +Indent the display by the .Ar width , -which is interpreted as one of the following, specified in order: +which may be one of the following: .Bl -item .It -As one of the pre-defined strings -.Ar indent , +One of the pre-defined strings +.Cm indent , the width of standard indentation; -.Ar indent-two , +.Cm indent-two , twice -.Ar indent ; -.Ar left , -which has no effect ; -.Ar right , -which justifies to the right margin; and -.Ar center , +.Cm indent ; +.Cm left , +which has no effect; +.Cm right , +which justifies to the right margin; or +.Cm center , which aligns around an imagined centre axis. .It -As a precalculated width for a named macro. The most popular is the -imaginary macro +A macro invocation, which selects a predefined width +associated with that macro. +The most popular is the imaginary macro .Ar \&Ds , which resolves to -.Ar 6n . +.Sy 6n . .It -As a scaling unit following the syntax described in +A width using the syntax described in .Sx Scaling Widths . .It -As the calculated string length of the opaque string. +An arbitrary string, which indents by the length of this string. .El .Pp -If unset, it will revert to the value of -.Ar 8n -as described in -.Sx Scaling Widths . +When the argument is missing, +.Fl offset +is ignored. .It Fl compact -Do not assert a vertical space before the block. -.It Fl file Ar file -Prepend the file -.Ar file -before any text or macros within the block. +Do not assert vertical space before the display. .El .Pp Examples: .Bd -literal -offset indent -\&.Bd \-unfilled \-offset two-indent \-compact +\&.Bd \-literal \-offset indent \-compact Hello world. \&.Ed .Ed @@ -1058,68 +1141,191 @@ See also and .Sx \&Dl . .Ss \&Bf +Change the font mode for a scoped block of text. +Its syntax is as follows: +.Bd -ragged -offset indent +.Pf \. Sx \&Bf +.Oo +.Fl emphasis | literal | symbolic | +.Cm \&Em | \&Li | \&Sy +.Oc +.Ed +.Pp +The +.Fl emphasis +and +.Cm \&Em +argument are equivalent, as are +.Fl symbolic +and +.Cm \&Sy , +and +.Fl literal +and +.Cm \&Li . +Without an argument, this macro does nothing. +The font mode continues until broken by a new font mode in a nested +scope or +.Sx \&Ef +is encountered. +.Pp +See also +.Sx \&Li , +.Sx \&Ef , +.Sx \&Em , +and +.Sx \&Sy . .Ss \&Bk +Keep the output generated from each macro input line together +on one single output line. +Line breaks in free-form text lines are unaffected. +The syntax is as follows: +.Pp +.D1 Pf \. Sx \&Bk Fl words +.Pp +The +.Fl words +argument is required; additional arguments are ignored. +.Pp +The following example will not break within each +.Sx \&Op +macro line: +.Bd -literal -offset indent +\&.Bk \-words +\&.Op Fl f Ar flags +\&.Op Fl o Ar output +\&.Ek +.Ed +.Pp +Be careful in using over-long lines within a keep block! +Doing so will clobber the right margin. .Ss \&Bl -.\" Begins a list composed of one or more list entries. A list entry is -.\" specified by the -.\" .Sx \&It -.\" macro, which consists of a head and optional body. By default, a list -.\" is preceded by a blank line. A list must specify one of the following -.\" list types: -.\" .Bl -tag -width 12n -.\" .It Fl bullet -.\" A list offset by a bullet. The head of list entries must be empty. -.\" List entry bodies are justified after the bullet. -.\" .It Fl column -.\" A columnated list. The number of columns is specified as arguments to -.\" the -.\" .Sx \&Bl -.\" macro (the deprecated form of following the invocation of -.\" .Fl column -.\" is also accepted). Arguments dictate the width of columns specified in -.\" list entries. List entry bodies must be left empty. Columns specified -.\" in the list entry head are justified to their position in the sequence -.\" of columns. -.\" .It Fl dash -.\" A list offset by a dash (hyphen). The head of list entries must be -.\" empty. List entry bodies are justified past the dash. -.\" .It Fl diag -.\" Like -.\" .Fl inset -.\" lists, but with additional formatting to the head. -.\" .It Fl enum -.\" A list offset by a number indicating list entry position. The head of -.\" list entries must be empty. List entry bodies are justified past the -.\" enumeration. -.\" .It Fl hang -.\" Like -.\" .Fl tag , -.\" but instead of list bodies justifying to the head on the first line, -.\" they trail the head text. -.\" .It Fl hyphen -.\" Synonym for -.\" .Fl dash . -.\" .It Fl inset -.\" Like -.\" .Fl tag , -.\" but list entry bodies aren't justified. -.\" .It Fl item -.\" An un-justified list. This produces blocks of text. -.\" .It Fl ohang -.\" List bodies are placed on the line following the head. -.\" .It Fl tag -.\" A list offset by list entry heads. List entry bodies are justified -.\" after the head. -.\" .El -.\" .Pp -.\" More... -.\" . +Begin a list. +Lists consist of items started by the +.Sx \&It +macro, containing a head or a body or both. +The list syntax is as follows: +.Bd -ragged -offset indent +.Pf \. Sx \&Bl +.Fl Ns Ar type +.Op Fl width Ar val +.Op Fl offset Ar val +.Op Fl compact +.Op HEAD ... +.Ed +.Pp +The list +.Ar type +is mandatory and must be specified first. +The +.Fl width +and +.Fl offset +arguments accept +.Sx Scaling Widths +or use the length of the given string. +The +.Fl offset +is a global indentation for the whole list, affecting both item heads +and bodies. +For those list types supporting it, the +.Fl width +argument requests an additional indentation of item bodies, +to be added to the +.Fl offset . +Unless the +.Fl compact +argument is specified, list entries are separated by vertical space. +.Pp +A list must specify one of the following list types: +.Bl -tag -width 12n -offset indent +.It Fl bullet +No item heads can be specified, but a bullet will be printed at the head +of each item. +Item bodies start on the same output line as the bullet +and are indented according to the +.Fl width +argument. +.It Fl column +A columnated list. +The +.Fl width +argument has no effect; instead, each argument specifies the width +of one column, using either the +.Sx Scaling Widths +syntax or the string length of the argument. +If the first line of the body of a +.Fl column +list is not an +.Sx \&It +macro line, +.Sx \&It +contexts spanning one input line each are implied until an +.Sx \&It +macro line is encountered, at which point items start being interpreted as +described in the +.Sx \&It +documentation. +.It Fl dash +Like +.Fl bullet , +except that dashes are used in place of bullets. +.It Fl diag +Like +.Fl inset , +except that item heads are not parsed for macro invocations. +.\" but with additional formatting to the head. +.It Fl enum +A numbered list. +Formatted like +.Fl bullet , +except that cardinal numbers are used in place of bullets, +starting at 1. +.It Fl hang +Like +.Fl tag , +except that the first lines of item bodies are not indented, but follow +the item heads like in +.Fl inset +lists. +.It Fl hyphen +Synonym for +.Fl dash . +.It Fl inset +Item bodies follow items heads on the same line, using normal inter-word +spacing. +Bodies are not indented, and the +.Fl width +argument is ignored. +.It Fl item +No item heads can be specified, and none are printed. +Bodies are not indented, and the +.Fl width +argument is ignored. +.It Fl ohang +Item bodies start on the line following item heads and are not indented. +The +.Fl width +argument is ignored. +.It Fl tag +Item bodies are indented according to the +.Fl width +argument. +When an item head fits inside the indentation, the item body follows +this head on the same output line. +Otherwise, the body starts on the output line following the head. +.El +.Pp +See also +.Sx \&El +and +.Sx \&It . .Ss \&Bo -Begins a block enclosed by square brackets. Does not have any head -arguments. +Begin a block enclosed by square brackets. +Does not have any head arguments. .Pp Examples: -.Bd -literal -offset indent +.Bd -literal -offset indent -compact \&.Bo 1 , \&.Dv BUFSIZ \&Bc .Ed @@ -1143,15 +1349,16 @@ and See also .Sx \&Bo . .Ss \&Brc -Closes a +Close a .Sx \&Bro -block. Does not have any tail arguments. +block. +Does not have any tail arguments. .Ss \&Bro -Begins a block enclosed by curly braces. Does not have any head -arguments. +Begin a block enclosed by curly braces. +Does not have any head arguments. .Pp Examples: -.Bd -literal -offset indent +.Bd -literal -offset indent -compact \&.Bro 1 , ... , \&.Va n \&Brc .Ed @@ -1185,7 +1392,7 @@ and .Sx \&Ux . .Ss \&Bt Prints -.Dq is currently in beta test. +.Dq is currently in beta test . .Ss \&Bx Format the BSD version provided as an argument, or a default value if no argument is provided. @@ -1204,7 +1411,8 @@ See also and .Sx \&Ux . .Ss \&Cd -Configuration declaration. This denotes strings accepted by +Kernel configuration declaration. +This denotes strings accepted by .Xr config 8 . .Pp Examples: @@ -1212,12 +1420,13 @@ Examples: .Pp .Em Remarks : this macro is commonly abused by using quoted literals to retain -white-space and align consecutive +whitespace and align consecutive .Sx \&Cd -declarations. This practise is discouraged. +declarations. +This practise is discouraged. .Ss \&Cm -Command modifiers. Useful when specifying configuration options or -keys. +Command modifiers. +Useful when specifying configuration options or keys. .Pp Examples: .D1 \&.Cm ControlPath @@ -1226,8 +1435,10 @@ Examples: See also .Sx \&Fl . .Ss \&D1 -One-line indented display. This is formatted by the default rules and -is useful for simple indented statements. It is followed by a newline. +One-line indented display. +This is formatted by the default rules and is useful for simple indented +statements. +It is followed by a newline. .Pp Examples: .D1 \&.D1 \&Fl abcdefgh @@ -1237,26 +1448,36 @@ See also and .Sx \&Dl . .Ss \&Db +Switch debugging mode. +Its syntax is as follows: +.Pp +.D1 Pf \. Sx \&Db Cm on | off +.Pp +This macro is ignored by +.Xr mandoc 1 . .Ss \&Dc -Closes a +Close a .Sx \&Do -block. Does not have any tail arguments. +block. +Does not have any tail arguments. .Ss \&Dd -Document date. This is the mandatory first macro of any +Document date. +This is the mandatory first macro of any .Nm -manual. Its calling syntax is as follows: +manual. +Its syntax is as follows: .Pp -.D1 \. Ns Sx \&Dd Cm date +.D1 Pf \. Sx \&Dd Op Ar date .Pp The -.Cm date -field may be either +.Ar date +may be either .Ar $\&Mdocdate$ , which signifies the current manual revision date dictated by .Xr cvs 1 , or instead a valid canonical date as specified by .Sx Dates . -If a date does not conform, the current date is used instead. +If a date does not conform or is empty, the current date is used. .Pp Examples: .D1 \&.Dd $\&Mdocdate$ @@ -1268,27 +1489,36 @@ See also and .Sx \&Os . .Ss \&Dl -One-line intended display. This is formatted as literal text and is -useful for commands and invocations. It is followed by a newline. +One-line intended display. +This is formatted as literal text and is useful for commands and +invocations. +It is followed by a newline. .Pp Examples: -.D1 \&.Dl % mandoc mdoc.7 | less +.D1 \&.Dl % mandoc mdoc.7 \e(ba less .Pp See also .Sx \&Bd and .Sx \&D1 . .Ss \&Do -Begins a block enclosed by double quotes. Does not have any head -arguments. +Begin a block enclosed by double quotes. +Does not have any head arguments. .Pp Examples: -.D1 \&.D1 \&Do April is the cruellest month \&Dc \e(em T.S. Eliot +.Bd -literal -offset indent -compact +\&.Do +April is the cruellest month +\&.Dc +\e(em T.S. Eliot +.Ed .Pp See also .Sx \&Dq . .Ss \&Dq -Encloses its arguments in double quotes. +Encloses its arguments in +.Dq typographic +double-quotes. .Pp Examples: .Bd -literal -offset indent -compact @@ -1297,21 +1527,37 @@ Examples: .Ed .Pp See also +.Sx \&Qq , +.Sx \&Sq , +and .Sx \&Do . .Ss \&Dt -Document title. This is the mandatory second macro of any +Document title. +This is the mandatory second macro of any .Nm -file. Its calling syntax is as follows: +file. +Its syntax is as follows: +.Bd -ragged -offset indent +.Pf \. Sx \&Dt +.Oo +.Ar title +.Oo +.Ar section +.Op Ar volume | arch +.Oc +.Oc +.Ed .Pp -.D1 \. Ns Sx \&Dt Cm title section Op Cm volume | arch -.Pp Its arguments are as follows: .Bl -tag -width Ds -offset Ds -.It Cm title -The document's title (name). This should be capitalised and is -required. -.It Cm section -The manual section. This may be one of +.It Ar title +The document's title (name), defaulting to +.Dq UNKNOWN +if unspecified. +It should be capitalised. +.It Ar section +The manual section. +This may be one of .Ar 1 .Pq utilities , .Ar 2 @@ -1345,9 +1591,10 @@ The manual section. This may be one of or .Ar paper .Pq paper . -It is also required and should correspond to the manual's filename -suffix. -.It Cm volume +It should correspond to the manual's filename suffix and defaults to +.Dq 1 +if unspecified. +.It Ar volume This overrides the volume inferred from .Ar section . This field is optional, and if specified, must be one of @@ -1376,11 +1623,14 @@ This field is optional, and if specified, must be one or .Ar CON .Pq contributed manuals . -.It Cm arch -This specifies a specific relevant architecture. If -.Cm volume +.It Ar arch +This specifies a specific relevant architecture. +If +.Ar volume is not provided, it may be used in its place, else it may be used -subsequent that. It, too, is optional. It must be one of +subsequent that. +It, too, is optional. +It must be one of .Ar alpha , .Ar amd64 , .Ar amiga , @@ -1415,7 +1665,6 @@ Examples: .D1 \&.Dt FOO 1 .D1 \&.Dt FOO 4 KM .D1 \&.Dt FOO 9 i386 -.D1 \&.Dt FOO 9 KM i386 .Pp See also .Sx \&Dd @@ -1448,20 +1697,62 @@ See also and .Sx \&Ux . .Ss \&Ec +Close a scope started by +.Sx \&Eo . +Its syntax is as follows: +.Pp +.D1 Pf \. Sx \&Ec Op Ar TERM +.Pp +The +.Ar TERM +argument is used as the enclosure tail, for example, specifying \e(rq +will emulate +.Sx \&Dc . .Ss \&Ed +End a display context started by +.Sx \&Bd . .Ss \&Ef +End a font mode context started by +.Sx \&Bf . .Ss \&Ek +End a keep context started by +.Sx \&Bk . .Ss \&El +End a list context started by +.Sx \&Bl . +.Pp +See also +.Sx \&Bl +and +.Sx \&It . .Ss \&Em -Denotes text that should be emphasised. Note that this is a -presentation term and should not be used for stylistically decorating -technical terms. +Denotes text that should be emphasised. +Note that this is a presentation term and should not be used for +stylistically decorating technical terms. .Pp Examples: .D1 \&.Em Warnings! .D1 \&.Em Remarks : +.Pp +See also +.Sx \&Bf , +.Sx \&Sy , +and +.Sx \&Li . .Ss \&En +This macro is obsolete and not implemented in +.Xr mandoc 1 . .Ss \&Eo +An arbitrary enclosure. +Its syntax is as follows: +.Pp +.D1 Pf \. Sx \&Eo Op Ar TERM +.Pp +The +.Ar TERM +argument is used as the enclosure head, for example, specifying \e(lq +will emulate +.Sx \&Do . .Ss \&Er Display error constants. .Pp @@ -1472,6 +1763,7 @@ Examples: See also .Sx \&Dv . .Ss \&Es +This macro is obsolete and not implemented. .Ss \&Ev Environmental variables such as those specified in .Xr environ 7 . @@ -1480,26 +1772,72 @@ Examples: .D1 \&.Ev DISPLAY .D1 \&.Ev PATH .Ss \&Ex -Inserts text regarding a utility's exit values. This macro must have -first the -.Fl std -argument specified, then an optional -.Ar utility . -If +Insert a standard sentence regarding exit values. +Its syntax is as follows: +.Pp +.D1 Pf \. Sx \&Ex Fl std Op Ar utility +.Pp +When .Ar utility -is not provided, the document's name as stipulated in +is not specified, the document's name set by .Sx \&Nm -is provided. +is used. +.Pp +See also +.Sx \&Rv . .Ss \&Fa +Function argument. +Its syntax is as follows: +.Bd -ragged -offset indent +.Pf \. Sx \&Fa +.Op Cm argtype +.Cm argname +.Ed +.Pp +This may be invoked for names with or without the corresponding type. +It is also used to specify the field name of a structure. +Most often, the +.Sx \&Fa +macro is used in the +.Em SYNOPSIS +within +.Sx \&Fo +section when documenting multi-line function prototypes. +If invoked with multiple arguments, the arguments are separated by a +comma. +Furthermore, if the following macro is another +.Sx \&Fa , +the last argument will also have a trailing comma. +.Pp +Examples: +.D1 \&.Fa \(dqconst char *p\(dq +.D1 \&.Fa \(dqint a\(dq \(dqint b\(dq \(dqint c\(dq +.D1 \&.Fa foo +.Pp +See also +.Sx \&Fo . .Ss \&Fc +End a function context started by +.Sx \&Fo . .Ss \&Fd +Historically used to document include files. +This usage has been deprecated in favour of +.Sx \&In . +Do not use this macro. +.Pp +See also +.Sx MANUAL STRUCTURE +and +.Sx \&In . .Ss \&Fl -Command-line flag. Used when listing arguments to command-line -utilities. Prints a fixed-width hyphen +Command-line flag. +Used when listing arguments to command-line utilities. +Prints a fixed-width hyphen .Sq \- -directly followed by each argument. If no arguments are provided, a hyphen is -printed followed by a space. If the argument is a macro, a hyphen is -prefixed to the subsequent macro output. +directly followed by each argument. +If no arguments are provided, a hyphen is printed followed by a space. +If the argument is a macro, a hyphen is prefixed to the subsequent macro +output. .Pp Examples: .D1 \&.Fl a b c @@ -1510,11 +1848,85 @@ Examples: See also .Sx \&Cm . .Ss \&Fn +A function name. +Its syntax is as follows: +.Bd -ragged -offset indent +.Pf \. Ns Sx \&Fn +.Op Cm functype +.Cm funcname +.Op Oo Cm argtype Oc Cm argname +.Ed +.Pp +Function arguments are surrounded in parenthesis and +are delimited by commas. +If no arguments are specified, blank parenthesis are output. +.Pp +Examples: +.D1 \&.Fn "int funcname" "int arg0" "int arg1" +.D1 \&.Fn funcname "int arg0" +.D1 \&.Fn funcname arg0 +.Bd -literal -offset indent -compact +\&.Ft functype +\&.Fn funcname +.Ed +.Pp +See also +.Sx MANUAL STRUCTURE +and +.Sx \&Ft . .Ss \&Fo -.Ss \&Fr +Begin a function block. +This is a multi-line version of +.Sx \&Fn . +Its syntax is as follows: +.Pp +.D1 Pf \. Sx \&Fo Cm funcname +.Pp +Invocations usually occur in the following context: +.Bd -ragged -offset indent +.Pf \. Sx \&Ft Cm functype +.br +.Pf \. Sx \&Fo Cm funcname +.br +.Pf \. Sx \&Fa Oo Cm argtype Oc Cm argname +.br +\.\.\. +.br +.Pf \. Sx \&Fc +.Ed +.Pp +A +.Sx \&Fo +scope is closed by +.Pp +See also +.Sx MANUAL STRUCTURE , +.Sx \&Fa , +.Sx \&Fc , +and +.Sx \&Ft . .Ss \&Ft +A function type. +Its syntax is as follows: +.Pp +.D1 Pf \. Sx \&Ft Cm functype +.Pp +Examples: +.D1 \&.Ft int +.Bd -literal -offset indent -compact +\&.Ft functype +\&.Fn funcname +.Ed +.Pp +See also +.Sx MANUAL STRUCTURE , +.Sx \&Fn , +and +.Sx \&Fo . .Ss \&Fx -Format the FreeBSD version provided as an argument, or a default value +Format the +.Fx +version provided as an argument, or a default value if no argument is provided. .Pp Examples: @@ -1531,15 +1943,160 @@ See also and .Sx \&Ux . .Ss \&Hf +This macro is obsolete and not implemented. .Ss \&Ic +Designate an internal or interactive command. +This is similar to +.Sx \&Cm +but used for instructions rather than values. +.Pp +Examples: +.D1 \&.Ic hash +.D1 \&.Ic alias +.Pp +Note that using +.Sx \&Bd Fl literal +or +.Sx \&D1 +is preferred for displaying code; the +.Sx \&Ic +macro is used when referring to specific instructions. .Ss \&In +An +.Dq include +file. +In the +.Em SYNOPSIS +section (only if invoked as the line macro), the first argument is +preceded by +.Dq #include , +the arguments is enclosed in angle brackets. +.Pp +Examples: +.D1 \&.In sys/types +.Pp +See also +.Sx MANUAL STRUCTURE . .Ss \&It +A list item. +The syntax of this macro depends on the list type. +.Pp +Lists +of type +.Fl hang , +.Fl ohang , +.Fl inset , +and +.Fl diag +have the following syntax: +.Pp +.D1 Pf \. Sx \&It Cm args +.Pp +Lists of type +.Fl bullet , +.Fl dash , +.Fl enum , +.Fl hyphen +and +.Fl item +have the following syntax: +.Pp +.D1 Pf \. Sx \&It +.Pp +with subsequent lines interpreted within the scope of the +.Sx \&It +until either a closing +.Sx \&El +or another +.Sx \&It . +.Pp +The +.Fl tag +list has the following syntax: +.Pp +.D1 Pf \. Sx \&It Op Cm args +.Pp +Subsequent lines are interpreted as with +.Fl bullet +and family. +The line arguments correspond to the list's left-hand side; body +arguments correspond to the list's contents. +.Pp +The +.Fl column +list is the most complicated. +Its syntax is as follows: +.Pp +.D1 Pf \. Sx \&It Op Cm args +.Pp +The +.Cm args +are phrases, a mix of macros and text corresponding to a line column, +delimited by tabs or the special +.Sq \&Ta +pseudo-macro. +Lines subsequent the +.Sx \&It +are interpreted within the scope of the last phrase. +Calling the pseudo-macro +.Sq \&Ta +will open a new phrase scope (this must occur on a macro line to be +interpreted as a macro). +Note that the tab phrase delimiter may only be used within the +.Sx \&It +line itself. +Subsequent this, only the +.Sq \&Ta +pseudo-macro may be used to delimit phrases. +Furthermore, note that quoted sections propagate over tab-delimited +phrases on an +.Sx \&It , +for example, +.Pp +.D1 .It \(dqcol1 ; col2 ;\(dq \&; +.Pp +will preserve the semicolon whitespace except for the last. +.Pp +See also +.Sx \&Bl . .Ss \&Lb +Specify a library. +The syntax is as follows: +.Pp +.D1 Pf \. Sx \&Lb Cm library +.Pp +The +.Cm library +parameter may be a system library, such as +.Cm libz +or +.Cm libpam , +in which case a small library description is printed next to the linker +invocation; or a custom library, in which case the library name is +printed in quotes. +This is most commonly used in the +.Em SYNOPSIS +section as described in +.Sx MANUAL STRUCTURE . +.Pp +Examples: +.D1 \&.Lb libz +.D1 \&.Lb mdoc .Ss \&Li +Denotes text that should be in a literal font mode. +Note that this is a presentation term and should not be used for +stylistically decorating technical terms. +.Pp +See also +.Sx \&Bf , +.Sx \&Sy , +and +.Sx \&Em . .Ss \&Lk -Format a hyperlink. The calling syntax is as follows: +Format a hyperlink. +Its syntax is as follows: .Pp -.D1 \. Ns Sx \&Lk Cm uri Op Cm name +.D1 Pf \. Sx \&Lk Cm uri Op Cm name .Pp Examples: .D1 \&.Lk http://bsd.lv "The BSD.lv Project" @@ -1548,14 +2105,111 @@ Examples: See also .Sx \&Mt . .Ss \&Lp +Synonym for +.Sx \&Pp . .Ss \&Ms +Display a mathematical symbol. +Its syntax is as follows: +.Pp +.D1 Pf \. Sx \&Ms Cm symbol +.Pp +Examples: +.D1 \&.Ms sigma +.D1 \&.Ms aleph .Ss \&Mt +Format a +.Dq mailto: +hyperlink. +Its syntax is as follows: +.Pp +.D1 Pf \. Sx \&Mt Cm address +.Pp +Examples: +.D1 \&.Mt discuss@manpages.bsd.lv .Ss \&Nd +A one line description of the manual's content. +This may only be invoked in the +.Em SYNOPSIS +section subsequent the +.Sx \&Nm +macro. +.Pp +Examples: +.D1 \&.Sx \&Nd mdoc language reference +.D1 \&.Sx \&Nd format and display UNIX manuals +.Pp +The +.Sx \&Nd +macro technically accepts child macros and terminates with a subsequent +.Sx \&Sh +invocation. +Do not assume this behaviour: some +.Xr whatis 1 +database generators are not smart enough to parse more than the line +arguments and will display macros verbatim. +.Pp +See also +.Sx \&Nm . .Ss \&Nm +The name of the manual page, or \(em in particular in section 1, 6, +and 8 pages \(em of an additional command or feature documented in +the manual page. +When first invoked, the +.Sx \&Nm +macro expects a single argument, the name of the manual page. +Usually, the first invocation happens in the +.Em NAME +section of the page. +The specified name will be remembered and used whenever the macro is +called again without arguments later in the page. +The +.Sx \&Nm +macro uses +.Sx Block full-implicit +semantics when invoked as the first macro on an input line in the +.Em SYNOPSIS +section; otherwise, it uses ordinary +.Sx In-line +semantics. +.Pp +Examples: +.Bd -literal -offset indent +\&.Sh SYNOPSIS +\&.Nm cat +\&.Op Fl benstuv +\&.Op Ar +.Ed +.Pp +In the +.Em SYNOPSIS +of section 2, 3 and 9 manual pages, use the +.Sx \&Fn +macro rather than +.Sx \&Nm +to mark up the name of the manual page. .Ss \&No +A +.Dq noop +macro used to terminate prior macro contexts. +.Pp +Examples: +.D1 \&.Sx \&Fl ab \&No cd \&Fl ef .Ss \&Ns +Suppress a space. +Following invocation, text is interpreted as free-form text until a +macro is encountered. +.Pp +Examples: +.D1 \&.Fl o \&Ns \&Ar output +.Pp +See also +.Sx \&No +and +.Sx \&Sm . .Ss \&Nx -Format the NetBSD version provided as an argument, or a default value if +Format the +.Nx +version provided as an argument, or a default value if no argument is provided. .Pp Examples: @@ -1572,21 +2226,45 @@ See also and .Sx \&Ux . .Ss \&Oc +Close multi-line +.Sx \&Oo +context. .Ss \&Oo +Multi-line version of +.Sx \&Op . +.Pp +Examples: +.Bd -literal -offset indent -compact +\&.Oo +\&.Op Fl flag Ns Ar value +\&.Oc +.Ed .Ss \&Op +Command-line option. +Used when listing options to command-line utilities. +Prints the argument(s) in brackets. +.Pp +Examples: +.D1 \&.Op \&Fl a \&Ar b +.D1 \&.Op \&Ar a | b +.Pp +See also +.Sx \&Oo . .Ss \&Os -Document operating system version. This is the mandatory third macro of +Document operating system version. +This is the mandatory third macro of any .Nm -file. Its calling syntax is as follows: +file. +Its syntax is as follows: .Pp -.D1 \. Ns Sx \&Os Op Cm system +.D1 Pf \. Sx \&Os Op Cm system Op Cm version .Pp The optional .Cm system -parameter specifies the relevant operating system or environment. Left -unspecified, it defaults to the local operating system version. This is -the suggested form. +parameter specifies the relevant operating system or environment. +Left unspecified, it defaults to the local operating system version. +This is the suggested form. .Pp Examples: .D1 \&.Os @@ -1603,7 +2281,9 @@ Unknown usage. .Em Remarks : this macro has been deprecated. .Ss \&Ox -Format the OpenBSD version provided as an argument, or a default value +Format the +.Ox +version provided as an argument, or a default value if no argument is provided. .Pp Examples: @@ -1620,24 +2300,78 @@ See also and .Sx \&Ux . .Ss \&Pa +A file-system path. +.Pp +Examples: +.D1 \&.Pa /usr/bin/mandoc +.D1 \&.Pa /usr/share/man/man7/mdoc.7 +.Pp +See also +.Sx \&Lk . .Ss \&Pc +Close parenthesised context opened by +.Sx \&Po . .Ss \&Pf +Removes the space +.Pq Dq prefix +between its arguments. +Its syntax is as follows: +.Pp +.D1 Pf \. \&Pf Cm prefix suffix +.Pp +The +.Cm suffix +argument may be a macro. +.Pp +Examples: +.D1 \&.Pf \e. \&Sx \&Pf \&Cm prefix suffix .Ss \&Po +Multi-line version of +.Sx \&Pq . .Ss \&Pp +Break a paragraph. +This will assert vertical space between prior and subsequent macros +and/or text. .Ss \&Pq +Parenthesised enclosure. +.Pp +See also +.Sx \&Po . .Ss \&Qc +Close quoted context opened by +.Sx \&Qo . .Ss \&Ql +Format a single-quoted literal. +See also +.Sx \&Qq +and +.Sx \&Sq . .Ss \&Qo +Multi-line version of +.Sx \&Qq . .Ss \&Qq +Encloses its arguments in +.Dq typewriter +double-quotes. +Consider using +.Sx \&Dq . +.Pp +See also +.Sx \&Dq , +.Sx \&Sq , +and +.Sx \&Qo . .Ss \&Re -Closes a +Close an .Sx \&Rs -block. Does not have any tail arguments. +block. +Does not have any tail arguments. .Ss \&Rs -Begins a bibliographic +Begin a bibliographic .Pq Dq reference -block. Does not have any head arguments. The block macro may only -contain +block. +Does not have any head arguments. +The block macro may only contain .Sx \&%A , .Sx \&%B , .Sx \&%C , @@ -1650,6 +2384,7 @@ contain .Sx \&%Q , .Sx \&%R , .Sx \&%T , +.Sx \&%U , and .Sx \&%V child macros (at least one must be specified). @@ -1672,19 +2407,206 @@ block is used within a SEE ALSO section, a vertical sp before the rendered output, else the block continues on the current line. .Ss \&Rv +Inserts text regarding a function call's return value. +This macro must consist of the +.Fl std +argument followed by an optional +.Ar function . +If +.Ar function +is not provided, the document's name as stipulated by the first +.Sx \&Nm +is provided. +.Pp +See also +.Sx \&Ex . .Ss \&Sc +Close single-quoted context opened by +.Sx \&So . .Ss \&Sh +Begin a new section. +For a list of conventional manual sections, see +.Sx MANUAL STRUCTURE . +These sections should be used unless it's absolutely necessary that +custom sections be used. +.Pp +Section names should be unique so that they may be keyed by +.Sx \&Sx . +.Pp +See also +.Sx \&Pp , +.Sx \&Ss , +and +.Sx \&Sx . .Ss \&Sm +Switches the spacing mode for output generated from macros. +Its syntax is as follows: +.Pp +.D1 Pf \. Sx \&Sm Cm on | off +.Pp +By default, spacing is +.Cm on . +When switched +.Cm off , +no white space is inserted between macro arguments and between the +output generated from adjacent macros, but free-form text lines +still get normal spacing between words and sentences. .Ss \&So +Multi-line version of +.Sx \&Sq . .Ss \&Sq +Encloses its arguments in +.Dq typewriter +single-quotes. +.Pp +See also +.Sx \&Dq , +.Sx \&Qq , +and +.Sx \&So . .Ss \&Ss +Begin a new sub-section. +Unlike with +.Sx \&Sh , +there's no convention for sub-sections. +Conventional sections, as described in +.Sx MANUAL STRUCTURE , +rarely have sub-sections. +.Pp +Sub-section names should be unique so that they may be keyed by +.Sx \&Sx . +.Pp +See also +.Sx \&Pp , +.Sx \&Sh , +and +.Sx \&Sx . .Ss \&St +Replace an abbreviation for a standard with the full form. +The following standards are recognised: +.Pp +.Bl -tag -width "-p1003.1g-2000X" -compact +.It \-p1003.1-88 +.St -p1003.1-88 +.It \-p1003.1-90 +.St -p1003.1-90 +.It \-p1003.1-96 +.St -p1003.1-96 +.It \-p1003.1-2001 +.St -p1003.1-2001 +.It \-p1003.1-2004 +.St -p1003.1-2004 +.It \-p1003.1-2008 +.St -p1003.1-2008 +.It \-p1003.1 +.St -p1003.1 +.It \-p1003.1b +.St -p1003.1b +.It \-p1003.1b-93 +.St -p1003.1b-93 +.It \-p1003.1c-95 +.St -p1003.1c-95 +.It \-p1003.1g-2000 +.St -p1003.1g-2000 +.It \-p1003.1i-95 +.St -p1003.1i-95 +.It \-p1003.2-92 +.St -p1003.2-92 +.It \-p1003.2a-92 +.St -p1003.2a-92 +.It \-p1387.2-95 +.St -p1387.2-95 +.It \-p1003.2 +.St -p1003.2 +.It \-p1387.2 +.St -p1387.2 +.It \-isoC +.St -isoC +.It \-isoC-90 +.St -isoC-90 +.It \-isoC-amd1 +.St -isoC-amd1 +.It \-isoC-tcor1 +.St -isoC-tcor1 +.It \-isoC-tcor2 +.St -isoC-tcor2 +.It \-isoC-99 +.St -isoC-99 +.It \-iso9945-1-90 +.St -iso9945-1-90 +.It \-iso9945-1-96 +.St -iso9945-1-96 +.It \-iso9945-2-93 +.St -iso9945-2-93 +.It \-ansiC +.St -ansiC +.It \-ansiC-89 +.St -ansiC-89 +.It \-ansiC-99 +.St -ansiC-99 +.It \-ieee754 +.St -ieee754 +.It \-iso8802-3 +.St -iso8802-3 +.It \-ieee1275-94 +.St -ieee1275-94 +.It \-xpg3 +.St -xpg3 +.It \-xpg4 +.St -xpg4 +.It \-xpg4.2 +.St -xpg4.2 +.St -xpg4.3 +.It \-xbd5 +.St -xbd5 +.It \-xcu5 +.St -xcu5 +.It \-xsh5 +.St -xsh5 +.It \-xns5 +.St -xns5 +.It \-xns5.2 +.St -xns5.2 +.It \-xns5.2d2.0 +.St -xns5.2d2.0 +.It \-xcurses4.2 +.St -xcurses4.2 +.It \-susv2 +.St -susv2 +.It \-susv3 +.St -susv3 +.It \-svid4 +.St -svid4 +.El .Ss \&Sx +Reference a section or sub-section. +The referenced section or sub-section name must be identical to the +enclosed argument, including whitespace. +.Pp +Examples: +.D1 \&.Sx MANUAL STRUCTURE .Ss \&Sy +Format enclosed arguments in symbolic +.Pq Dq boldface . +Note that this is a presentation term and should not be used for +stylistically decorating technical terms. +.Pp +See also +.Sx \&Bf , +.Sx \&Li , +and +.Sx \&Em . .Ss \&Tn +Format a tradename. +.Pp +Examples: +.D1 \&.Tn IBM .Ss \&Ud +Prints out +.Dq currently under development . .Ss \&Ux -Format the UNIX name. Accepts no argument. +Format the UNIX name. +Accepts no argument. .Pp Examples: .D1 \&.Ux @@ -1699,13 +2621,21 @@ See also and .Sx \&Ox . .Ss \&Va +A variable name. +.Pp +Examples: +.D1 \&.Va foo +.D1 \&.Va const char *bar ; .Ss \&Vt -A variable type. This is also used for indicating global variables in the -SYNOPSIS section, in which case a variable name is also specified. Note that -it accepts +A variable type. +This is also used for indicating global variables in the +.Em SYNOPSIS +section, in which case a variable name is also specified. +Note that it accepts .Sx Block partial-implicit -syntax when invoked as the first macro in the SYNOPSIS section, else it -accepts ordinary +syntax when invoked as the first macro in the +.Em SYNOPSIS +section, else it accepts ordinary .Sx In-line syntax. .Pp @@ -1715,44 +2645,66 @@ which is used for function return types. .Pp Examples: .D1 \&.Vt unsigned char -.D1 \&.Vt extern const char * const sys_signame[] ; +.D1 \&.Vt extern const char * const sys_signame[] \&; .Pp See also -.Sx \&Ft +.Sx MANUAL STRUCTURE and .Sx \&Va . .Ss \&Xc Close a scope opened by .Sx \&Xo . .Ss \&Xo -Open an extension scope. This macro originally existed to extend the -9-argument limit of troff; since this limit has been lifted, the macro -has been deprecated. +Open an extension scope. +This macro originally existed to extend the 9-argument limit of troff; +since this limit has been lifted, the macro has been deprecated. .Ss \&Xr Link to another manual .Pq Qq cross-reference . -Its calling syntax is +Its syntax is as follows: .Pp -.D1 \. Ns Sx \&Xr Cm name section +.D1 Pf \. Sx \&Xr Cm name section .Pp The .Cm name and .Cm section -are the name and section of the linked manual. If +are the name and section of the linked manual. +If .Cm section is followed by non-punctuation, an .Sx \&Ns -is inserted into the token stream. This behaviour is for compatibility -with +is inserted into the token stream. +This behaviour is for compatibility with .Xr groff 1 . .Pp Examples: .D1 \&.Xr mandoc 1 -.D1 \&.Xr mandoc 1 ; +.D1 \&.Xr mandoc 1 \&; .D1 \&.Xr mandoc 1 \&Ns s behaviour .Ss \&br +Emits a line-break. +This macro should not be used; it is implemented for compatibility with +historical manuals. +.Pp +Consider using +.Sx \&Pp +in the event of natural paragraph breaks. .Ss \&sp +Emits vertical space. +This macro should not be used; it is implemented for compatibility with +historical manuals. +Its syntax is as follows: +.Pp +.D1 Pf \. Sx \&sp Op Cm height +.Pp +The +.Cm height +argument must be formatted as described in +.Sx Scaling Widths . +If unspecified, +.Sx \&sp +asserts a single vertical space. .Sh COMPATIBILITY This section documents compatibility between mandoc and other other troff implementations, at this time limited to GNU troff @@ -1769,44 +2721,102 @@ Heirloom troff, the other significant troff implementa .Pp .Bl -dash -compact .It +An empty +.Sq \&Dd +macro in groff prints +.Dq Epoch . +In mandoc, it resolves to the current date. +.It +The \es (font size), \em (font colour), and \eM (font filling colour) +font decoration escapes are all discarded in mandoc. +.It +Old groff fails to assert a newline before +.Sx \&Bd Fl ragged compact . +.It +groff behaves inconsistently when encountering +.Pf non- Sx \&Fa +children of +.Sx \&Fo +regarding spacing between arguments. +In mandoc, this is not the case: each argument is consistently followed +by a single space and the trailing +.Sq \&) +suppresses prior spacing. +.It +groff behaves inconsistently when encountering +.Sx \&Ft +and +.Sx \&Fn +in the +.Em SYNOPSIS : +at times newline(s) are suppressed depending on whether a prior +.Sx \&Fn +has been invoked. +In mandoc, this is not the case. +See +.Sx \&Ft +and +.Sx \&Fn +for the normalised behaviour. +.It +Historic groff does not break before an +.Sx \&Fn +when not invoked as the line macro in the +.Em SYNOPSIS +section. +.It +Historic groff formats the +.Sx \&In +badly: trailing arguments are trashed and +.Em SYNOPSIS +is not specially treated. +.It +groff does not accept the +.Sq \&Ta +pseudo-macro as a line macro. +mandoc does. +.It The comment syntax -.Sq \e." +.Sq \e\." is no longer accepted. .It In groff, the .Sx \&Pa macro does not format its arguments when used in the FILES section under -certain list types. mandoc does. +certain list types. +mandoc does. .It Historic groff does not print a dash for empty .Sx \&Fl -arguments. mandoc and newer groff implementations do. +arguments. +mandoc and newer groff implementations do. .It groff behaves irregularly when specifying .Sq \ef .Sx Text Decoration -within line-macro scopes. mandoc follows a consistent system. +within line-macro scopes. +mandoc follows a consistent system. .It In mandoc, negative scaling units are truncated to zero; groff would -move to prior lines. Furthermore, the +move to prior lines. +Furthermore, the .Sq f scaling unit, while accepted, is rendered as the default unit. .It -In quoted literals, groff allowed pair-wise double-quotes to produce a -standalone double-quote in formatted output. This idiosyncratic -behaviour is not applicable in mandoc. +In quoted literals, groff allowed pairwise double-quotes to produce a +standalone double-quote in formatted output. +This idiosyncratic behaviour is not applicable in mandoc. .It -Display types +Display offsets .Sx \&Bd -.Fl center +.Fl offset Ar center and -.Fl right -are aliases for -.Fl left -in manodc. Furthermore, the +.Fl offset Ar right +are disregarded in mandoc. +Furthermore, troff specifies a .Fl file Ar file -argument is ignored. Lastly, since text is not right-justified in -mandoc (or even groff), +argument that is not supported in mandoc. +Lastly, since text is not right-justified in mandoc (or even groff), .Fl ragged and .Fl filled @@ -1815,8 +2825,8 @@ are aliases, as are and .Fl unfilled . .It -Historic groff has many un-callable macros. Most of these (excluding -some block-level macros) are now callable. +Historic groff has many un-callable macros. +Most of these (excluding some block-level macros) are now callable. .It The vertical bar .Sq \(ba @@ -1833,20 +2843,23 @@ lists will restart the sequence only for the sub-list. Some manuals use .Sx \&Li incorrectly by following it with a reserved character and expecting the -delimiter to render. This is not supported in mandoc. +delimiter to render. +This is not supported in mandoc. .It In groff, the -.Sx \&Fo -macro only produces the first parameter. This is not the case in -mandoc. -.It -In groff, the .Sx \&Cd , .Sx \&Er , +.Sx \&Ex , and -.Sx \&Ex -macros were stipulated only to occur in certain manual sections. mandoc -does not have these restrictions. +.Sx \&Rv +macros were stipulated only to occur in certain manual sections. +mandoc does not have these restrictions. +.It +Newer groff and mandoc print +.Qq AT&T UNIX +prior to unknown arguments of +.Sx \&At ; +older groff did nothing. .El .Sh SEE ALSO .Xr mandoc 1 , @@ -1856,71 +2869,3 @@ The .Nm reference was written by .An Kristaps Dzonsons Aq kristaps@bsd.lv . -.\" -.\" XXX: this really isn't the place for these caveats. -.\" . -.\" . -.\" .Sh CAVEATS -.\" There are many ambiguous parts of mdoc. -.\" . -.\" .Pp -.\" .Bl -dash -compact -.\" .It -.\" .Sq \&Fa -.\" should be -.\" .Sq \&Va -.\" as function arguments are variables. -.\" .It -.\" .Sq \&Ft -.\" should be -.\" .Sq \&Vt -.\" as function return types are still types. Furthermore, the -.\" .Sq \&Ft -.\" should be removed and -.\" .Sq \&Fo , -.\" which ostensibly follows it, should follow the same convention as -.\" .Sq \&Va . -.\" .It -.\" .Sq \&Va -.\" should formalise that only one or two arguments are acceptable: a -.\" variable name and optional, preceding type. -.\" .It -.\" .Sq \&Fd -.\" is ambiguous. It's commonly used to indicate an include file in the -.\" synopsis section. -.\" .Sq \&In -.\" should be used, instead. -.\" .It -.\" Only the -.\" .Sq \-literal -.\" argument to -.\" .Sq \&Bd -.\" makes sense. The remaining ones should be removed. -.\" .It -.\" The -.\" .Sq \&Xo -.\" and -.\" .Sq \&Xc -.\" macros should be deprecated. -.\" .It -.\" The -.\" .Sq \&Dt -.\" macro lacks clarity. It should be absolutely clear which title will -.\" render when formatting the manual page. -.\" .It -.\" A -.\" .Sq \&Lx -.\" should be provided for Linux (\(`a la -.\" .Sq \&Ox , -.\" .Sq \&Nx -.\" etc.). -.\" .It -.\" There's no way to refer to references in -.\" .Sq \&Rs/Re -.\" blocks. -.\" .It -.\" The \-split and \-nosplit dictates via -.\" .Sq \&An -.\" are re-set when entering and leaving the AUTHORS section. -.\" .El -.\" .