===================================================================
RCS file: /cvs/mandoc/roff.7,v
retrieving revision 1.37
retrieving revision 1.90
diff -u -p -r1.37 -r1.90
--- mandoc/roff.7	2011/12/11 00:38:11	1.37
+++ mandoc/roff.7	2017/06/14 14:02:39	1.90
@@ -1,7 +1,7 @@
-.\"	$Id: roff.7,v 1.37 2011/12/11 00:38:11 schwarze Exp $
+.\"	$Id: roff.7,v 1.90 2017/06/14 14:02:39 schwarze Exp $
 .\"
-.\" Copyright (c) 2010, 2011 Kristaps Dzonsons <kristaps@bsd.lv>
-.\" Copyright (c) 2010, 2011 Ingo Schwarze <schwarze@openbsd.org>
+.\" Copyright (c) 2010, 2011, 2012 Kristaps Dzonsons <kristaps@bsd.lv>
+.\" Copyright (c) 2010,2011,2013-2015,2017 Ingo Schwarze <schwarze@openbsd.org>
 .\"
 .\" Permission to use, copy, modify, and distribute this software for any
 .\" purpose with or without fee is hereby granted, provided that the above
@@ -15,7 +15,7 @@
 .\" ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
 .\" OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
 .\"
-.Dd $Mdocdate: December 11 2011 $
+.Dd $Mdocdate: June 14 2017 $
 .Dt ROFF 7
 .Os
 .Sh NAME
@@ -32,7 +32,7 @@ and
 manual formatting languages are based on it,
 many real-world manuals use small numbers of
 .Nm
-requests intermixed with their
+requests and escape sequences intermixed with their
 .Xr mdoc 7
 or
 .Xr man 7
@@ -41,8 +41,8 @@ To properly format such manuals, the
 .Xr mandoc 1
 utility supports a tiny subset of
 .Nm
-requests.
-Only these requests supported by
+requests and escapes.
+Only these requests and escapes supported by
 .Xr mandoc 1
 are documented in the present manual,
 together with the basic language syntax shared by
@@ -83,9 +83,9 @@ depends on the respective processing context.
 .Nm
 documents may contain only graphable 7-bit ASCII characters, the space
 character, and, in certain circumstances, the tab character.
-The back-space character
+The backslash character
 .Sq \e
-indicates the start of an escape sequence for
+indicates the start of an escape sequence, used for example for
 .Sx Comments ,
 .Sx Special Characters ,
 .Sx Predefined Strings ,
@@ -93,6 +93,9 @@ and
 user-defined strings defined using the
 .Sx ds
 request.
+For a listing of escape sequences, consult the
+.Sx ESCAPE SEQUENCE REFERENCE
+below.
 .Ss Comments
 Text following an escaped double-quote
 .Sq \e\(dq ,
@@ -146,12 +149,19 @@ respectively) may be used instead.
 The indicator or numerical representative may be preceded by C
 (constant-width), which is ignored.
 .Pp
+The two-character indicator
+.Sq BI
+requests a font that is both bold and italic.
+It may not be portable to old roff implementations.
+.Pp
 Examples:
 .Bl -tag -width Ds -offset indent -compact
 .It Li \efBbold\efR
-Write in bold, then switch to regular font mode.
+Write in \fBbold\fP, then switch to regular font mode.
 .It Li \efIitalic\efP
-Write in italic, then return to previous font mode.
+Write in \fIitalic\fP, then return to previous font mode.
+.It Li \ef(BIbold italic\efP
+Write in \f(BIbold italic\fP, then return to previous font mode.
 .El
 .Pp
 Text decoration is
@@ -229,8 +239,9 @@ pica (~1/6 inch)
 .It p
 point (~1/72 inch)
 .It f
-synonym for
+scale
 .Sq u
+by 65536
 .It v
 default vertical span
 .It m
@@ -244,7 +255,7 @@ width of rendered
 .Pq en
 character
 .It u
-default horizontal span
+default horizontal span for the terminal
 .It M
 mini-em (~1/100 em)
 .El
@@ -252,7 +263,6 @@ mini-em (~1/100 em)
 Using anything other than
 .Sq m ,
 .Sq n ,
-.Sq u ,
 or
 .Sq v
 is necessarily non-portable across output media.
@@ -385,60 +395,221 @@ The
 .Xr mandoc 1
 .Nm
 parser recognises the following requests.
-Note that the
-.Nm
-language defines many more requests not implemented in
-.Xr mandoc 1 .
-.Ss \&ad
-Set line adjustment mode.
-This line-scoped request is intended to have one argument to select
-normal, left, right, or centre adjustment for subsequent text.
-Currently, it is ignored including its arguments,
-and the number of arguments is not checked.
-.Ss \&am
+For requests marked as "ignored" or "unsupported", any arguments are
+ignored, and the number of arguments is not checked.
+.Bl -tag -width Ds
+.It Ic \&ab Op Ar message
+Abort processing.
+Currently unsupported.
+.It Ic \&ad Op Cm b | c | l | n | r
+Set line adjustment mode for subsequent text.
+Currently ignored.
+.It Ic \&af Ar registername format
+Assign an output format to a number register.
+Currently ignored.
+.It Ic \&aln Ar newname oldname
+Create an alias for a number register.
+Currently unsupported.
+.It Ic \&als Ar newname oldname
+Create an alias for a request, string, macro, or diversion.
+Currently unsupported.
+.It Ic \&am Ar macroname Op Ar endmacro
 Append to a macro definition.
 The syntax of this request is the same as that of
-.Sx \&de .
-It is currently ignored by
-.Xr mandoc 1 ,
-as are its children.
-.Ss \&ami
-Append to a macro definition, specifying the macro name indirectly.
-The syntax of this request is the same as that of
-.Sx \&dei .
-It is currently ignored by
-.Xr mandoc 1 ,
-as are its children.
-.Ss \&am1
+.Ic \&de .
+.It Ic \&am1 Ar macroname Op Ar endmacro
 Append to a macro definition, switching roff compatibility mode off
-during macro execution.
+during macro execution (groff extension).
 The syntax of this request is the same as that of
-.Sx \&de1 .
-It is currently ignored by
-.Xr mandoc 1 ,
-as are its children.
-.Ss \&de
+.Ic \&de1 .
+Since
+.Xr mandoc 1
+does not implement
+.Nm
+compatibility mode at all, it handles this request as an alias for
+.Ic \&am .
+.It Ic \&ami Ar macrostring Op Ar endstring
+Append to a macro definition, specifying the macro name indirectly
+(groff extension).
+The syntax of this request is the same as that of
+.Ic \&dei .
+.It Ic \&ami1 Ar macrostring Op Ar endstring
+Append to a macro definition, specifying the macro name indirectly
+and switching roff compatibility mode off during macro execution
+(groff extension).
+The syntax of this request is the same as that of
+.Ic \&dei1 .
+Since
+.Xr mandoc 1
+does not implement
+.Nm
+compatibility mode at all, it handles this request as an alias for
+.Ic \&ami .
+.It Ic \&as Ar stringname Op Ar string
+Append to a user-defined string.
+The syntax of this request is the same as that of
+.Sx \&ds .
+If a user-defined string with the specified name does not yet exist,
+it is set to the empty string before appending.
+.It Ic \&as1 Ar stringname Op Ar string
+Append to a user-defined string, switching roff compatibility mode off
+during macro execution (groff extension).
+The syntax of this request is the same as that of
+.Ic \&ds1 .
+Since
+.Xr mandoc 1
+does not implement
+.Nm
+compatibility mode at all, it handles this request as an alias for
+.Ic \&as .
+.It Ic \&asciify Ar divname
+Fully unformat a diversion.
+Currently unsupported.
+.It Ic \&backtrace
+Print a backtrace of the input stack.
+This is a groff extension and currently ignored.
+.It Ic \&bd Ar font Oo Ar curfont Oc Op Ar offset
+Artificially embolden by repeated printing with small shifts.
+Currently ignored.
+.It Ic \&bleedat Ar left top width height
+Set the BleedBox page parameter for PDF generation.
+This is a Heirloom extension and currently ignored.
+.It Ic \&blm Ar macroname
+Set a blank line trap.
+Currently unsupported.
+.It Ic \&box Ar divname
+Begin a diversion without including a partially filled line.
+Currently unsupported.
+.It Ic \&boxa Ar divname
+Add to a diversion without including a partially filled line.
+Currently unsupported.
+.It Ic \&bp Oo Cm + Ns | Ns Cm - Oc Ns Ar pagenumber
+Begin a new page.
+Currently ignored.
+.It Ic \&BP Ar source height width position offset flags label
+Define a frame and place a picture in it.
+This is a Heirloom extension and currently unsupported.
+.It Ic \&br
+Break the output line.
+.It Ic \&break
+Break out of a
+.Ic \&while
+loop.
+Currently unsupported.
+.It Ic \&breakchar Ar char ...
+Optional line break characters.
+This is a Heirloom extension and currently ignored.
+.It Ic \&brnl Ar N
+Break output line after the next
+.Ar N
+input lines.
+This is a Heirloom extension and currently ignored.
+.It Ic \&brp
+Break and spread output line.
+Currently, this is implemented as an alias for
+.Ic \&br .
+.It Ic \&brpnl Ar N
+Break and spread output line after the next
+.Ar N
+input lines.
+This is a Heirloom extension and currently ignored.
+.It Ic \&c2 Op Ar char
+Change the no-break control character.
+Currently unsupported.
+.It Ic \&cc Op Ar char
+Change the control character.
+If
+.Ar char
+is not specified, the control character is reset to
+.Sq \&. .
+Trailing characters are ignored.
+.It Ic \&ce Op Ar N
+Center the next
+.Ar N
+input lines without filling.
+.Ar N
+defaults to 1.
+An argument of 0 or less ends centering.
+Currently, high level macros abort centering.
+.It Ic \&cf Ar filename
+Output the contents of a file.
+Ignored because insecure.
+.It Ic \&cflags Ar flags char ...
+Set character flags.
+This is a groff extension and currently ignored.
+.It Ic \&ch Ar macroname Op Ar dist
+Change a trap location.
+Currently ignored.
+.It Ic \&char Ar glyphname Op Ar string
+Define a new glyph.
+Currently unsupported.
+.It Ic \&chop Ar stringname
+Remove the last character from a macro, string, or diversion.
+Currently unsupported.
+.It Ic \&class Ar classname char ...
+Define a character class.
+This is a groff extension and currently ignored.
+.It Ic \&close Ar streamname
+Close an open file.
+Ignored because insecure.
+.It Ic \&CL Ar color text
+Print text in color.
+This is a Heirloom extension and currently unsupported.
+.It Ic \&color Op Cm 1 | 0
+Activate or deactivate colors.
+This is a groff extension and currently ignored.
+.It Ic \&composite Ar from to
+Define a name component for composite glyph names.
+This is a groff extension and currently unsupported.
+.It Ic \&continue
+Immediately start the next iteration of a
+.Ic \&while
+loop.
+Currently unsupported.
+.It Ic \&cp Op Cm 1 | 0
+Switch
+.Nm
+compatibility mode on or off.
+Currently ignored.
+.It Ic \&cropat Ar left top width height
+Set the CropBox page parameter for PDF generation.
+This is a Heirloom extension and currently ignored.
+.It Ic \&cs Ar font Op Ar width Op Ar emsize
+Constant character spacing mode.
+Currently ignored.
+.It Ic \&cu Op Ar N
+Underline next
+.Ar N
+input lines including whitespace.
+Currently ignored.
+.It Ic \&da Ar divname
+Append to a diversion.
+Currently unsupported.
+.It Ic \&dch Ar macroname Op Ar dist
+Change a trap location in the current diversion.
+This is a Heirloom extension and currently unsupported.
+.It Ic \&de Ar macroname Op Ar endmacro
 Define a
 .Nm
 macro.
 Its syntax can be either
 .Bd -literal -offset indent
-.Pf . Cm \&de Ar name
-.Ar macro definition
+.Pf . Ic \&de Ar macroname
+.Ar definition
 \&..
 .Ed
 .Pp
 or
 .Bd -literal -offset indent
-.Pf . Cm \&de Ar name Ar end
-.Ar macro definition
-.Pf . Ar end
+.Pf . Ic \&de Ar macroname Ar endmacro
+.Ar definition
+.Pf . Ar endmacro
 .Ed
 .Pp
 Both forms define or redefine the macro
-.Ar name
+.Ar macroname
 to represent the
-.Ar macro definition ,
+.Ar definition ,
 which may consist of one or more input lines, including the newline
 characters terminating each line, optionally containing calls to
 .Nm
@@ -451,13 +622,13 @@ or
 macros, whichever applies to the document in question.
 .Pp
 Specifying a custom
-.Ar end
+.Ar endmacro
 macro works in the same way as for
-.Sx \&ig ;
+.Ic \&ig ;
 namely, the call to
-.Sq Pf . Ar end
+.Sq Pf . Ar endmacro
 first ends the
-.Ar macro definition ,
+.Ar definition ,
 and after that, it is also evaluated as a
 .Nm
 request or
@@ -466,7 +637,7 @@ macro, but not as a high-level macro.
 .Pp
 The macro can be invoked later using the syntax
 .Pp
-.D1 Pf . Ar name Op Ar argument Op Ar argument ...
+.D1 Pf . Ar macroname Op Ar argument Op Ar argument ...
 .Pp
 Regarding argument parsing, see
 .Sx MACRO SYNTAX
@@ -474,7 +645,7 @@ above.
 .Pp
 The line invoking the macro will be replaced
 in the input stream by the
-.Ar macro definition ,
+.Ar definition ,
 replacing all occurrences of
 .No \e\e$ Ns Ar N ,
 where
@@ -494,58 +665,84 @@ produces
 .D1 \efI\e^XtFree\e^\efP.
 .Pp
 in the input stream, and thus in the output: \fI\^XtFree\^\fP.
+Each occurrence of \e\e$* is replaced with all the arguments,
+joined together with single blank characters.
 .Pp
 Since macros and user-defined strings share a common string table,
 defining a macro
-.Ar name
+.Ar macroname
 clobbers the user-defined string
-.Ar name ,
+.Ar macroname ,
 and the
-.Ar macro definition
+.Ar definition
 can also be printed using the
 .Sq \e*
 string interpolation syntax described below
-.Sx ds ,
+.Ic ds ,
 but this is rarely useful because every macro definition contains at least
 one explicit newline character.
 .Pp
 In order to prevent endless recursion, both groff and
 .Xr mandoc 1
 limit the stack depth for expanding macros and strings
-to a large, but finite number.
-Do not rely on the exact value of this limit.
-.Ss \&dei
+to a large, but finite number, and
+.Xr mandoc 1
+also limits the length of the expanded input line.
+Do not rely on the exact values of these limits.
+.It Ic \&de1 Ar macroname Op Ar endmacro
 Define a
 .Nm
-macro, specifying the macro name indirectly.
+macro that will be executed with
+.Nm
+compatibility mode switched off during macro execution.
+This is a groff extension.
+Since
+.Xr mandoc 1
+does not implement
+.Nm
+compatibility mode at all, it handles this request as an alias for
+.Ic \&de .
+.It Ic \&defcolor Ar newname scheme component ...
+Define a color name.
+This is a groff extension and currently ignored.
+.It Ic \&dei Ar macrostring Op Ar endstring
+Define a
+.Nm
+macro, specifying the macro name indirectly (groff extension).
 The syntax of this request is the same as that of
-.Sx \&de .
-It is currently ignored by
-.Xr mandoc 1 ,
-as are its children.
-.Ss \&de1
+.Ic \&de .
+The effect is the same as:
+.Pp
+.D1 Pf . Cm \&de No \e* Ns Bo Ar macrostring Bc Op \e* Ns Bq Ar endstring
+.It Ic \&dei1 Ar macrostring Op Ar endstring
 Define a
 .Nm
 macro that will be executed with
 .Nm
-compatibility mode switched off during macro execution.
-This is a GNU extension not available in traditional
-.Nm
-implementations and not even in older versions of groff.
+compatibility mode switched off during macro execution,
+specifying the macro name indirectly (groff extension).
 Since
 .Xr mandoc 1
 does not implement
 .Nm
 compatibility mode at all, it handles this request as an alias for
-.Sx \&de .
-.Ss \&ds
+.Ic \&dei .
+.It Ic \&device Ar string ...
+.It Ic \&devicem Ar stringname
+These two requests only make sense with the groff-specific intermediate
+output format and are unsupported.
+.It Ic \&di Ar divname
+Begin a diversion.
+Currently unsupported.
+.It Ic \&do Ar command Op Ar argument ...
+Execute
+.Nm
+request or macro line with compatibility mode disabled.
+Currently unsupported.
+.It Ic \&ds Ar stringname Op Oo \(dq Oc Ns Ar string
 Define a user-defined string.
-Its syntax is as follows:
-.Pp
-.D1 Pf . Cm \&ds Ar name Oo \(dq Oc Ns Ar string
-.Pp
 The
-.Ar name
+.Ar stringname
 and
 .Ar string
 arguments are space-separated.
@@ -560,11 +757,11 @@ including whitespace and double-quote characters, even
 The
 .Ar string
 can be interpolated into subsequent text by using
-.No \e* Ns Bq Ar name
+.No \e* Ns Bq Ar stringname
 for a
-.Ar name
+.Ar stringname
 of arbitrary length, or \e*(NN or \e*N if the length of
-.Ar name
+.Ar stringname
 is two or one characters, respectively.
 Interpolation can be prevented by escaping the leading backslash;
 that is, an asterisk preceded by an even number of backslashes
@@ -572,11 +769,11 @@ does not trigger string interpolation.
 .Pp
 Since user-defined strings and macros share a common string table,
 defining a string
-.Ar name
+.Ar stringname
 clobbers the macro
-.Ar name ,
+.Ar stringname ,
 and the
-.Ar name
+.Ar stringname
 used for defining a string can also be invoked as a macro,
 in which case the following input line will be appended to the
 .Ar string ,
@@ -591,53 +788,310 @@ H SYNOPSIS
 .Ed
 .Pp
 invokes the
-.Cm SH
+.Ic SH
 macro when used in a
 .Xr man 7
 document.
 Such abuse is of course strongly discouraged.
-.Ss \&el
+.It Ic \&ds1 Ar stringname Op Oo \(dq Oc Ns Ar string
+Define a user-defined string that will be expanded with
+.Nm
+compatibility mode switched off during string expansion.
+This is a groff extension.
+Since
+.Xr mandoc 1
+does not implement
+.Nm
+compatibility mode at all, it handles this request as an alias for
+.Ic \&ds .
+.It Ic \&dwh Ar dist macroname
+Set a location trap in the current diversion.
+This is a Heirloom extension and currently unsupported.
+.It Ic \&dt Op Ar dist macroname
+Set a trap within a diversion.
+Currently unsupported.
+.It Ic \&ec Op Ar char
+Enable the escape mechanism and change the escape character.
 The
-.Qq else
+.Ar char
+argument defaults to the backslash
+.Pq Sq \e .
+.It Ic \&ecr
+Restore the escape character.
+Currently unsupported.
+.It Ic \&ecs
+Save the escape character.
+Currently unsupported.
+.It Ic \&el Ar body
+The
+.Dq else
 half of an if/else conditional.
 Pops a result off the stack of conditional evaluations pushed by
-.Sx \&ie
+.Ic \&ie
 and uses it as its conditional.
 If no stack entries are present (e.g., due to no prior
-.Sx \&ie
+.Ic \&ie
 calls)
 then false is assumed.
 The syntax of this request is similar to
-.Sx \&if
+.Ic \&if
 except that the conditional is missing.
-.Ss \&EN
+.It Ic \&em Ar macroname
+Set a trap at the end of input.
+Currently unsupported.
+.It Ic \&EN
 End an equation block.
 See
-.Sx \&EQ .
-.Ss \&EQ
+.Ic \&EQ .
+.It Ic \&eo
+Disable the escape mechanism completely.
+.It Ic \&EP
+End a picture started by
+.Ic \&BP .
+This is a Heirloom extension and currently unsupported.
+.It Ic \&EQ
 Begin an equation block.
 See
 .Xr eqn 7
 for a description of the equation language.
-.Ss \&hy
+.It Ic \&errprint Ar message
+Print a string like an error message.
+This is a Heirloom extension and currently ignored.
+.It Ic \&ev Op Ar envname
+Switch to another environment.
+Currently unsupported.
+.It Ic \&evc Op Ar envname
+Copy an environment into the current environment.
+Currently unsupported.
+.It Ic \&ex
+Abort processing and exit.
+Currently unsupported.
+.It Ic \&fallback Ar curfont font ...
+Select the fallback sequence for a font.
+This is a Heirloom extension and currently ignored.
+.It Ic \&fam Op Ar familyname
+Change the font family.
+This is a groff extension and currently ignored.
+.It Ic \&fc Op Ar delimchar Op Ar padchar
+Define a delimiting and a padding character for fields.
+Currently unsupported.
+.It Ic \&fchar Ar glyphname Op Ar string
+Define a fallback glyph.
+Currently unsupported.
+.It Ic \&fcolor Ar colorname
+Set the fill color for \eD objects.
+This is a groff extension and currently ignored.
+.It Ic \&fdeferlig Ar font string ...
+Defer ligature building.
+This is a Heirloom extension and currently ignored.
+.It Ic \&feature Cm + Ns | Ns Cm - Ns Ar name
+Enable or disable an OpenType feature.
+This is a Heirloom extension and currently ignored.
+.It Ic \&fi
+Switch to fill mode.
+See
+.Xr man 7 .
+Ignored in
+.Xr mdoc 7 .
+.It Ic \&fkern Ar font minkern
+Control the use of kerning tables for a font.
+This is a Heirloom extension and currently ignored.
+.It Ic \&fl
+Flush output.
+Currently ignored.
+.It Ic \&flig Ar font string char ...
+Define ligatures.
+This is a Heirloom extension and currently ignored.
+.It Ic \&fp Ar position font Op Ar filename
+Assign font position.
+Currently ignored.
+.It Ic \&fps Ar mapname ...
+Mount a font with a special character map.
+This is a Heirloom extension and currently ignored.
+.It Ic \&fschar Ar font glyphname Op Ar string
+Define a font-specific fallback glyph.
+This is a groff extension and currently unsupported.
+.It Ic \&fspacewidth Ar font Op Ar afmunits
+Set a font-specific width for the space character.
+This is a Heirloom extension and currently ignored.
+.It Ic \&fspecial Ar curfont Op Ar font ...
+Conditionally define a special font.
+This is a groff extension and currently ignored.
+.It Ic \&ft Op Ar font
+Change the font.
+The following
+.Ar font
+arguments are supported:
+.Bl -tag -width 4n -offset indent
+.It Cm B , BI , 3 , 4
+switches to
+.Sy bold
+font
+.It Cm I , 2
+switches to
+.Em underlined
+font
+.It Cm R , CW , 1
+switches to normal font
+.It Cm P No "or no argument"
+switches back to the previous font
+.El
+.Pp
+This request takes effect only locally and may be overridden
+by macros and escape sequences.
+.It Ic \&ftr Ar newname Op Ar oldname
+Translate font name.
+This is a groff extension and currently ignored.
+.It Ic \&fzoom Ar font Op Ar permille
+Zoom font size.
+Currently ignored.
+.It Ic \&gcolor Op Ar colorname
+Set glyph color.
+This is a groff extension and currently ignored.
+.It Ic \&hc Op Ar char
+Set the hyphenation character.
+Currently ignored.
+.It Ic \&hcode Ar char code ...
+Set hyphenation codes of characters.
+Currently ignored.
+.It Ic \&hidechar Ar font char ...
+Hide characters in a font.
+This is a Heirloom extension and currently ignored.
+.It Ic \&hla Ar language
+Set hyphenation language.
+This is a groff extension and currently ignored.
+.It Ic \&hlm Op Ar number
+Set maximum number of consecutive hyphenated lines.
+Currently ignored.
+.It Ic \&hpf Ar filename
+Load hyphenation pattern file.
+This is a groff extension and currently ignored.
+.It Ic \&hpfa Ar filename
+Load hyphenation pattern file, appending to the current patterns.
+This is a groff extension and currently ignored.
+.It Ic \&hpfcode Ar code code ...
+Define mapping values for character codes in hyphenation patterns.
+This is a groff extension and currently ignored.
+.It Ic \&hw Ar word ...
+Specify hyphenation points in words.
+Currently ignored.
+.It Ic \&hy Op Ar mode
 Set automatic hyphenation mode.
-This line-scoped request is currently ignored.
-.Ss \&ie
+Currently ignored.
+.It Ic \&hylang Ar language
+Set hyphenation language.
+This is a Heirloom extension and currently ignored.
+.It Ic \&hylen Ar nchar
+Minimum word length for hyphenation.
+This is a Heirloom extension and currently ignored.
+.It Ic \&hym Op Ar length
+Set hyphenation margin.
+This is a groff extension and currently ignored.
+.It Ic \&hypp Ar penalty ...
+Define hyphenation penalties.
+This is a Heirloom extension and currently ignored.
+.It Ic \&hys Op Ar length
+Set hyphenation space.
+This is a groff extension and currently ignored.
+.It Ic \&ie Ar condition body
 The
-.Qq if
+.Dq if
 half of an if/else conditional.
 The result of the conditional is pushed into a stack used by subsequent
 invocations of
-.Sx \&el ,
+.Ic \&el ,
 which may be separated by any intervening input (or not exist at all).
 Its syntax is equivalent to
-.Sx \&if .
-.Ss \&if
-Begins a conditional.
-Right now, the conditional evaluates to true
-if and only if it starts with the letter
-.Sy n ,
-indicating processing in nroff style as opposed to troff style.
+.Ic \&if .
+.It Ic \&if Ar condition body
+Begin a conditional.
+This request can also be written as follows:
+.Bd -unfilled -offset indent
+.Pf . Ic \&if Ar condition No \e{ Ns Ar body
+.Ar body ... Ns \e}
+.Ed
+.Bd -unfilled -offset indent
+.Pf . Ic \&if Ar condition No \e{\e
+.Ar body ...
+.Pf . No \e}
+.Ed
+.Pp
+The
+.Ar condition
+is a boolean expression.
+Currently,
+.Xr mandoc 1
+supports the following subset of roff conditionals:
+.Bl -bullet
+.It
+If
+.Sq \&!
+is prefixed to
+.Ar condition ,
+it is logically inverted.
+.It
+If the first character of
+.Ar condition
+is
+.Sq n
+.Pq nroff mode
+or
+.Sq o
+.Pq odd page ,
+it evaluates to true.
+.It
+If the first character of
+.Ar condition
+is
+.Sq c
+.Pq character available ,
+.Sq e
+.Pq even page ,
+.Sq t
+.Pq troff mode ,
+or
+.Sq v
+.Pq vroff mode ,
+it evaluates to false.
+.It
+If the first character of
+.Ar condition
+is
+.Sq d ,
+it evaluates to true if the rest of
+.Ar condition
+is the name of an existing user defined macro or string;
+otherwise, it evaluates to false.
+.It
+If the first character of
+.Ar condition
+is
+.Sq r ,
+it evaluates to true if the rest of
+.Ar condition
+is the name of an existing number register;
+otherwise, it evaluates to false.
+.It
+If the
+.Ar condition
+starts with a parenthesis or with an optionally signed
+integer number, it is evaluated according to the rules of
+.Sx Numerical expressions
+explained below.
+It evaluates to true if the result is positive,
+or to false if the result is zero or negative.
+.It
+Otherwise, the first character of
+.Ar condition
+is regarded as a delimiter and it evaluates to true if the string
+extending from its first to its second occurrence is equal to the
+string extending from its second to its third occurrence.
+.It
+If
+.Ar condition
+cannot be parsed, it evaluates to false.
+.El
+.Pp
 If a conditional is false, its children are not processed, but are
 syntactically interpreted to preserve the integrity of the input
 document.
@@ -655,61 +1109,34 @@ will continue to syntactically interpret to the block 
 conditional.
 Sub-conditionals, in this case, obviously inherit the truth value of
 the parent.
-This request has the following syntax:
-.Bd -literal -offset indent
-\&.if COND \e{\e
-BODY...
-\&.\e}
-.Ed
-.Bd -literal -offset indent
-\&.if COND \e{ BODY
-BODY... \e}
-.Ed
-.Bd -literal -offset indent
-\&.if COND \e{ BODY
-BODY...
-\&.\e}
-.Ed
-.Bd -literal -offset indent
-\&.if COND \e
-BODY
-.Ed
 .Pp
-COND is a conditional statement.
-roff allows for complicated conditionals; mandoc is much simpler.
-At this time, mandoc supports only
-.Sq n ,
-evaluating to true;
-and
-.Sq t ,
-.Sq e ,
-and
-.Sq o ,
-evaluating to false.
-All other invocations are read up to the next end of line or space and
-evaluate as false.
-.Pp
-If the BODY section is begun by an escaped brace
+If the
+.Ar body
+section is begun by an escaped brace
 .Sq \e{ ,
-scope continues until a closing-brace escape sequence
-.Sq \.\e} .
-If the BODY is not enclosed in braces, scope continues until
-the end of the line.
-If the COND is followed by a BODY on the same line, whether after a
-brace or not, then requests and macros
+scope continues until the end of the input line containing the
+matching closing-brace escape sequence
+.Sq \e} .
+If the
+.Ar body
+is not enclosed in braces, scope continues until the end of the line.
+If the
+.Ar condition
+is followed by a
+.Ar body
+on the same line, whether after a brace or not, then requests and macros
 .Em must
 begin with a control character.
 It is generally more intuitive, in this case, to write
-.Bd -literal -offset indent
-\&.if COND \e{\e
-\&.foo
-bar
-\&.\e}
+.Bd -unfilled -offset indent
+.Pf . Ic \&if Ar condition No \e{\e
+.Pf . Ar request
+.Pf . No \e}
 .Ed
 .Pp
 than having the request or macro follow as
 .Pp
-.D1 \&.if COND \e{ .foo
+.D1 Pf . Ic \&if Ar condition Pf \e{. Ar request
 .Pp
 The scope of a conditional is always parsed, but only executed if the
 conditional evaluates to true.
@@ -728,7 +1155,7 @@ will result in
 being considered an argument of the
 .Sq \&Fl
 macro.
-.Ss \&ig
+.It Ic \&ig Op Ar endmacro
 Ignore input.
 Its syntax can be either
 .Bd -literal -offset indent
@@ -739,31 +1166,31 @@ Its syntax can be either
 .Pp
 or
 .Bd -literal -offset indent
-.Pf . Cm \&ig Ar end
+.Pf . Cm \&ig Ar endmacro
 .Ar ignored text
-.Pf . Ar end
+.Pf . Ar endmacro
 .Ed
 .Pp
 In the first case, input is ignored until a
 .Sq \&..
 request is encountered on its own line.
 In the second case, input is ignored until the specified
-.Sq Pf . Ar end
-macro is encountered.
+.Sq Pf . Ar endmacro
+is encountered.
 Do not use the escape character
 .Sq \e
 anywhere in the definition of
-.Ar end ;
+.Ar endmacro ;
 it would cause very strange behaviour.
 .Pp
 When the
-.Ar end
-macro is a roff request or a roff macro, like in
+.Ar endmacro
+is a roff request or a roff macro, like in
 .Pp
 .D1 \&.ig if
 .Pp
 the subsequent invocation of
-.Sx \&if
+.Ic \&if
 will first terminate the
 .Ar ignored text ,
 then be invoked as usual.
@@ -772,33 +1199,171 @@ Otherwise, it only terminates the
 and arguments following it or the
 .Sq \&..
 request are discarded.
-.Ss \&ne
+.It Ic \&in Op Oo Cm + Ns | Ns Cm - Oc Ns Ar width
+Change indentation.
+See
+.Xr man 7 .
+Ignored in
+.Xr mdoc 7 .
+.It Ic \&index Ar register stringname substring
+Find a substring in a string.
+This is a Heirloom extension and currently unsupported.
+.It Ic \&it Ar expression macro
+Set an input line trap.
+The named
+.Ar macro
+will be invoked after processing the number of input text lines
+specified by the numerical
+.Ar expression .
+While evaluating the
+.Ar expression ,
+the unit suffixes described below
+.Sx Scaling Widths
+are ignored.
+.It Ic \&it Ar expression macro
+Set an input line trap, not counting lines ending with \ec.
+Currently unsupported.
+.It Ic \&IX Ar class keystring
+To support the generation of a table of contents,
+.Xr pod2man 1
+emits this user-defined macro, usually without defining it.
+To avoid reporting large numbers of spurious errors,
+.Xr mandoc 1
+ignores it.
+.It Ic \&kern Op Cm 1 | 0
+Switch kerning on or off.
+Currently ignored.
+.It Ic \&kernafter Ar font char ... afmunits ...
+Increase kerning after some characters.
+This is a Heirloom extension and currently ignored.
+.It Ic \&kernbefore Ar font char ... afmunits ...
+Increase kerning before some characters.
+This is a Heirloom extension and currently ignored.
+.It Ic \&kernpair Ar font char ... font char ... afmunits
+Add a kerning pair to the kerning table.
+This is a Heirloom extension and currently ignored.
+.It Ic \&lc Op Ar glyph
+Define a leader repetition character.
+Currently unsupported.
+.It Ic \&lc_ctype Ar localename
+Set the
+.Dv LC_CTYPE
+locale.
+This is a Heirloom extension and currently unsupported.
+.It Ic \&lds Ar macroname string
+Define a local string.
+This is a Heirloom extension and currently unsupported.
+.It Ic \&length Ar register string
+Count the number of input characters in a string.
+Currently unsupported.
+.It Ic \&letadj Ar lspmin lshmin letss lspmax lshmax
+Dynamic letter spacing and reshaping.
+This is a Heirloom extension and currently ignored.
+.It Ic \&lf Ar lineno Op Ar filename
+Change the line number for error messages.
+Ignored because insecure.
+.It Ic \&lg Op Cm 1 | 0
+Switch the ligature mechanism on or off.
+Currently ignored.
+.It Ic \&lhang Ar font char ... afmunits
+Hang characters at left margin.
+This is a Heirloom extension and currently ignored.
+.It Ic \&linetabs Op Cm 1 | 0
+Enable or disable line-tabs mode.
+This is a groff extension and currently unsupported.
+.It Ic \&ll Op Oo Cm + Ns | Ns Cm - Oc Ns Ar width
+Change the output line length.
+If the
+.Ar width
+argument is omitted, the line length is reset to its previous value.
+The default setting for terminal output is 78n.
+If a sign is given, the line length is added to or subtracted from;
+otherwise, it is set to the provided value.
+Using this request in new manuals is discouraged for several reasons,
+among others because it overrides the
+.Xr mandoc 1
+.Fl O Cm width
+command line option.
+.It Ic \&lnr Ar register Oo Cm + Ns | Ns Cm - Oc Ns Ar value Op Ar increment
+Set local number register.
+This is a Heirloom extension and currently unsupported.
+.It Ic \&lnrf Ar register Oo Cm + Ns | Ns Cm - Oc Ns Ar value Op Ar increment
+Set local floating-point register.
+This is a Heirloom extension and currently unsupported.
+.It Ic \&lpfx Ar string
+Set a line prefix.
+This is a Heirloom extension and currently unsupported.
+.It Ic \&ls Op Ar factor
+Set line spacing.
+It takes one integer argument specifying the vertical distance of
+subsequent output text lines measured in v units.
+Currently ignored.
+.It Ic \&lsm Ar macroname
+Set a leading spaces trap.
+This is a groff extension and currently unsupported.
+.It Ic \&lt Op Oo Cm + Ns | Ns Cm - Oc Ns Ar width
+Set title line length.
+Currently ignored.
+.It Ic \&mc Ar glyph Op Ar dist
+Print margin character in the right margin.
+The
+.Ar dist
+is currently ignored; instead, 1n is used.
+.It Ic \&mediasize Ar media
+Set the device media size.
+This is a Heirloom extension and currently ignored.
+.It Ic \&minss Ar width
+Set minimum word space.
+This is a Heirloom extension and currently ignored.
+.It Ic \&mk Op Ar register
+Mark vertical position.
+Currently ignored.
+.It Ic \&mso Ar filename
+Load a macro file using the search path.
+Ignored because insecure.
+.It Ic \&na
+Disable adjusting without changing the adjustment mode.
+Currently ignored.
+.It Ic \&ne Op Ar height
 Declare the need for the specified minimum vertical space
 before the next trap or the bottom of the page.
-This line-scoped request is currently ignored.
-.Ss \&nh
+Currently ignored.
+.It Ic \&nf
+Switch to no-fill mode.
+See
+.Xr man 7 .
+Ignored by
+.Xr mdoc 7 .
+.It Ic \&nh
 Turn off automatic hyphenation mode.
-This line-scoped request is currently ignored.
-.Ss \&rm
-Remove a request, macro or string.
-This request is intended to have one argument,
-the name of the request, macro or string to be undefined.
-Currently, it is ignored including its arguments,
-and the number of arguments is not checked.
-.Ss \&nr
-Define a register.
+Currently ignored.
+.It Ic \&nhychar Ar char ...
+Define hyphenation-inhibiting characters.
+This is a Heirloom extension and currently ignored.
+.It Ic \&nm Op Ar start Op Ar inc Op Ar space Op Ar indent
+Print line numbers.
+Currently unsupported.
+.It Ic \&nn Op Ar number
+Temporarily turn off line numbering.
+Currently unsupported.
+.It Ic \&nop Ar body
+Execute the rest of the input line as a request or macro line.
+Currently unsupported.
+.It Ic \&nr Ar register Oo Cm + Ns | Ns Cm - Oc Ns Ar expression
+Define or change a register.
 A register is an arbitrary string value that defines some sort of state,
 which influences parsing and/or formatting.
-Its syntax is as follows:
+For the syntax of
+.Ar expression ,
+see
+.Sx Numerical expressions
+below.
+If it is prefixed by a sign, the register will be
+incremented or decremented instead of assigned to.
 .Pp
-.D1 Pf \. Cm \&nr Ar name Ar value
-.Pp
-The
-.Ar value
-may, at the moment, only be an integer.
-So far, only the following register
-.Ar name
-is recognised:
+The following
+.Ar register
+is handled specially:
 .Bl -tag -width Ds
 .It Cm nS
 If set to a positive integer value, certain
@@ -814,29 +1379,158 @@ section itself.
 Note that starting a new
 .Xr mdoc 7
 section with the
-.Cm \&Sh
+.Ic \&Sh
 macro will reset this register.
 .El
-.Ss \&ns
+.It Xo
+.Ic \&nrf Ar register Oo Cm + Ns | Ns Cm - Oc Ns Ar expression
+.Op Ar increment
+.Xc
+Define or change a floating-point register.
+This is a Heirloom extension and currently unsupported.
+.It Ic \&nroff
+Force nroff mode.
+This is a groff extension and currently ignored.
+.It Ic \&ns
 Turn on no-space mode.
-This line-scoped request is intended to take no arguments.
-Currently, it is ignored including its arguments,
-and the number of arguments is not checked.
-.Ss \&ps
+Currently ignored.
+.It Ic \&nx Op Ar filename
+Abort processing of the current input file and process another one.
+Ignored because insecure.
+.It Ic \&open Ar stream file
+Open a file for writing.
+Ignored because insecure.
+.It Ic \&opena Ar stream file
+Open a file for appending.
+Ignored because insecure.
+.It Ic \&os
+Output saved vertical space.
+Currently ignored.
+.It Ic \&output Ar string
+Output directly to intermediate output.
+Not supported.
+.It Ic \&padj Op Cm 1 | 0
+Globally control paragraph-at-once adjustment.
+This is a Heirloom extension and currently ignored.
+.It Ic \&papersize Ar media
+Set the paper size.
+This is a Heirloom extension and currently ignored.
+.It Ic \&pc Op Ar char
+Change the page number character.
+Currently ignored.
+.It Ic \&pev
+Print environments.
+This is a groff extension and currently ignored.
+.It Ic \&pi Ar command
+Pipe output to a shell command.
+Ignored because insecure.
+.It Ic \&PI
+Low-level request used by
+.Ic \&BP .
+This is a Heirloom extension and currently unsupported.
+.It Ic \&pl Op Oo Cm + Ns | Ns Cm - Oc Ns Ar height
+Change page length.
+Currently ignored.
+.It Ic \&pm
+Print names and sizes of macros, strings, and diversions
+to standard error output.
+Currently ignored.
+.It Ic \&pn Oo Cm + Ns | Ns Cm - Oc Ns Ar number
+Change the page number of the next page.
+Currently ignored.
+.It Ic \&pnr
+Print all number registers on standard error output.
+Currently ignored.
+.It Ic \&po Op Oo Cm + Ns | Ns Cm - Oc Ns Ar offset
+Set horizontal page offset.
+Currently ignored.
+.It Ic \&ps Op Oo Cm + Ns | Ns Cm - Oc Ns size
 Change point size.
-This line-scoped request is intended to take one numerical argument.
-Currently, it is ignored including its arguments,
-and the number of arguments is not checked.
-.Ss \&so
+Currently ignored.
+.It Ic \&psbb Ar filename
+Retrieve the bounding box of a PostScript file.
+Currently unsupported.
+.It Ic \&pshape Ar indent length ...
+Set a special shape for the current paragraph.
+This is a Heirloom extension and currently unsupported.
+.It Ic \&pso Ar command
+Include output of a shell command.
+Ignored because insecure.
+.It Ic \&ptr
+Print the names and positions of all traps on standard error output.
+This is a groff extension and currently ignored.
+.It Ic \&pvs Op Oo Cm + Ns | Ns Cm - Oc Ns Ar height
+Change post-vertical spacing.
+This is a groff extension and currently ignored.
+.It Ic \&rchar Ar glyph ...
+Remove glyph definitions.
+Currently unsupported.
+.It Ic \&rd Op Ar prompt Op Ar agument ...
+Read from standard input.
+Currently ignored.
+.It Ic \&recursionlimit Ar maxrec maxtail
+Set the maximum stack depth for recursive macros.
+This is a Heirloom extension and currently ignored.
+.It Ic \&return Op Ar twice
+Exit a macro and return to the caller.
+Currently unsupported.
+.It Ic \&rfschar Ar font glyph ...
+Remove font-specific fallback glyph definitions.
+Currently unsupported.
+.It Ic \&rhang Ar font char ... afmunits
+Hang characters at right margin.
+This is a Heirloom extension and currently ignored.
+.It Ic \&rj Op Ar N
+Justify the next
+.Ar N
+input lines to the right margin without filling.
+.Ar N
+defaults to 1.
+An argument of 0 or less ends right adjustment.
+.It Ic \&rm Ar macroname
+Remove a request, macro or string.
+.It Ic \&rn Ar oldname newname
+Rename a request, macro, diversion, or string.
+In
+.Xr mandoc 1 ,
+user-defined macros,
+.Xr mdoc 7
+and
+.Xr man 7
+macros, and user-defined strings can be renamed, but renaming of
+predefined strings and of
+.Nm
+requests is not supported, and diversions are not implemented at all.
+.It Ic \&rnn Ar oldname newname
+Rename a number register.
+Currently unsupported.
+.It Ic \&rr Ar register
+Remove a register.
+.It Ic \&rs
+End no-space mode.
+Currently ignored.
+.It Ic \&rt Op Ar dist
+Return to marked vertical position.
+Currently ignored.
+.It Ic \&schar Ar glyph Op Ar string
+Define global fallback glyph.
+This is a groff extension and currently unsupported.
+.It Ic \&sentchar Ar char ...
+Define sentence-ending characters.
+This is a Heirloom extension and currently ignored.
+.It Ic \&shc Op Ar glyph
+Change the soft hyphen character.
+Currently ignored.
+.It Ic \&shift Op Ar number
+Shift macro arguments.
+Currently unsupported.
+.It Ic \&sizes Ar size ...
+Define permissible point sizes.
+This is a groff extension and currently ignored.
+.It Ic \&so Ar filename
 Include a source file.
-Its syntax is as follows:
-.Pp
-.D1 Pf \. Cm \&so Ar file
-.Pp
-The
-.Ar file
-will be read and its contents processed as input in place of the
-.Sq \&.so
+The file is read and its contents processed as input in place of the
+.Ic \&so
 request line.
 To avoid inadvertent inclusion of unrelated files,
 .Xr mandoc 1
@@ -855,85 +1549,583 @@ Typical usage looks like:
 .Dl \&.so man3/Xcursor.3
 .Pp
 As the whole concept is rather fragile, the use of
-.Sx \&so
+.Ic \&so
 is discouraged.
 Use
 .Xr ln 1
 instead.
-.Ss \&ta
-Set tab stops.
-This line-scoped request can take an arbitrary number of arguments.
-Currently, it is ignored including its arguments.
-.Ss \&tr
-Output character translation.
-Its syntax is as follows:
-.Pp
-.D1 Pf \. Cm \&tr Ar [ab]+
-.Pp
-Pairs of
-.Ar ab
-characters are replaced
-.Ar ( a
-for
-.Ar b ) .
-Replacement (or origin) characters may also be character escapes; thus,
-.Pp
-.Dl tr \e(xx\e(yy
-.Pp
-replaces all invocations of \e(xx with \e(yy.
-.Ss \&T&
+.It Ic \&sp Op Ar height
+Break the output line and emit vertical space.
+The argument follows the syntax of
+.Sx Scaling Widths
+and defaults to one blank line
+.Pq Li 1v .
+.It Ic \&spacewidth Op Cm 1 | 0
+Set the space width from the font metrics file.
+This is a Heirloom extension and currently ignored.
+.It Ic \&special Op Ar font ...
+Define a special font.
+This is a groff extension and currently ignored.
+.It Ic \&spreadwarn Op Ar width
+Warn about wide spacing between words.
+Currently ignored.
+.It Ic \&ss Ar wordspace Op Ar sentencespace
+Set space character size.
+Currently ignored.
+.It Ic \&sty Ar position style
+Associate style with a font position.
+This is a groff extension and currently ignored.
+.It Ic \&substring Ar stringname startpos Op Ar endpos
+Replace a user-defined string with a substring.
+Currently unsupported.
+.It Ic \&sv Op Ar height
+Save vertical space.
+Currently ignored.
+.It Ic \&sy Ar command
+Execute shell command.
+Ignored because insecure.
+.It Ic \&T&
 Re-start a table layout, retaining the options of the prior table
 invocation.
 See
 .Sx \&TS .
-.Ss \&TE
+.It Ic \&ta Op Ar width ... Op Cm T Ar width ...
+Set tab stops.
+Each
+.Ar width
+argument follows the syntax of
+.Sx Scaling Widths .
+If prefixed by a plus sign, it is relative to the previous tab stop.
+The arguments after the
+.Cm T
+marker are used repeatedly as often as needed; for each reuse,
+they are taken relative to the last previously established tab stop.
+When
+.Ic \&ta
+is called without arguments, all tab stops are cleared.
+.It Ic \&tc Op Ar glyph
+Change tab repetition character.
+Currently unsupported.
+.It Ic \&TE
 End a table context.
 See
 .Sx \&TS .
-.Ss \&TS
+.It Ic \&ti Oo Cm + Ns | Ns Cm - Oc Ns Ar width
+Break the output line and indent the next output line by
+.Ar width .
+If a sign is specified, the temporary indentation is calculated
+relative to the current indentation; otherwise, it is absolute.
+The argument follows the syntax of
+.Sx Scaling Widths
+and the default scaling unit is
+.Cm m .
+.It Ic \&tkf Ar font minps width1 maxps width2
+Enable track kerning for a font.
+Currently ignored.
+.It Ic \&tl No \& Ap Ar left Ap Ar center Ap Ar right Ap
+Print a title line.
+Currently unsupported.
+.It Ic \&tm Ar string
+Print to standard error output.
+Currently ignored.
+.It Ic \&tm1 Ar string
+Print to standard error output, allowing leading blanks.
+This is a groff extension and currently ignored.
+.It Ic \&tmc Ar string
+Print to standard error output without a trailing newline.
+This is a groff extension and currently ignored.
+.It Ic \&tr Ar glyph glyph ...
+Output character translation.
+The first glyph in each pair is replaced by the second one.
+Character escapes can be used; for example,
+.Pp
+.Dl tr \e(xx\e(yy
+.Pp
+replaces all invocations of \e(xx with \e(yy.
+.It Ic \&track Ar font minps width1 maxps width2
+Static letter space tracking.
+This is a Heirloom extension and currently ignored.
+.It Ic \&transchar Ar char ...
+Define transparent characters for sentence-ending.
+This is a Heirloom extension and currently ignored.
+.It Ic \&trf Ar filename
+Output the contents of a file, disallowing invalid characters.
+This is a groff extension and ignored because insecure.
+.It Ic \&trimat Ar left top width height
+Set the TrimBox page parameter for PDF generation.
+This is a Heirloom extension and currently ignored.
+.It Ic \&trin Ar glyph glyph ...
+Output character translation, ignored by
+.Ic \&asciify .
+Currently unsupported.
+.It Ic \&trnt Ar glyph glyph ...
+Output character translation, ignored by \e!.
+Currently unsupported.
+.It Ic \&troff
+Force troff mode.
+This is a groff extension and currently ignored.
+.It Ic \&TS
 Begin a table, which formats input in aligned rows and columns.
 See
 .Xr tbl 7
 for a description of the tbl language.
+.It Ic \&uf Ar font
+Globally set the underline font.
+Currently ignored.
+.It Ic \&ul Op Ar N
+Underline next
+.Ar N
+input lines.
+Currently ignored.
+.It Ic \&unformat Ar divname
+Unformat spaces and tabs in a diversion.
+Currently unsupported.
+.It Ic \&unwatch Ar macroname
+Disable notification for string or macro.
+This is a Heirloom extension and currently ignored.
+.It Ic \&unwatchn Ar register
+Disable notification for register.
+This is a Heirloom extension and currently ignored.
+.It Ic \&vpt Op Cm 1 | 0
+Enable or disable vertical position traps.
+This is a groff extension and currently ignored.
+.It Ic \&vs Op Oo Cm + Ns | Ns Cm - Oc Ns Ar height
+Change vertical spacing.
+Currently ignored.
+.It Ic \&warn Ar flags
+Set warning level.
+Currently ignored.
+.It Ic \&warnscale Ar si
+Set the scaling indicator used in warnings.
+This is a groff extension and currently ignored.
+.It Ic \&watch Ar macroname
+Notify on change of string or macro.
+This is a Heirloom extension and currently ignored.
+.It Ic \&watchlength Ar maxlength
+On change, report the contents of macros and strings
+up to the specified length.
+This is a Heirloom extension and currently ignored.
+.It Ic \&watchn Ar register
+Notify on change of register.
+This is a Heirloom extension and currently ignored.
+.It Ic \&wh Ar dist Op Ar macroname
+Set a page location trap.
+Currently unsupported.
+.It Ic \&while Ar condition body
+Repeated execution while a condition is true.
+Currently unsupported.
+.It Ic \&write Oo \(dq Oc Ns Ar string
+Write to an open file.
+Ignored because insecure.
+.It Ic \&writec Oo \(dq Oc Ns Ar string
+Write to an open file without appending a newline.
+Ignored because insecure.
+.It Ic \&writem Ar macroname
+Write macro or string to an open file.
+Ignored because insecure.
+.It Ic \&xflag Ar level
+Set the extension level.
+This is a Heirloom extension and currently ignored.
+.El
+.Ss Numerical expressions
+The
+.Sx \&nr ,
+.Sx \&if ,
+and
+.Sx \&ie
+requests accept integer numerical expressions as arguments.
+These are always evaluated using the C
+.Vt int
+type; integer overflow works the same way as in the C language.
+Numbers consist of an arbitrary number of digits
+.Sq 0
+to
+.Sq 9
+prefixed by an optional sign
+.Sq +
+or
+.Sq - .
+Each number may be followed by one optional scaling unit described below
+.Sx Scaling Widths .
+The following equations hold:
+.Bd -literal -offset indent
+1i = 6v = 6P = 10m = 10n = 72p = 1000M = 240u = 240
+254c = 100i = 24000u = 24000
+1f = 65536u = 65536
+.Ed
+.Pp
+The following binary operators are implemented.
+Unless otherwise stated, they behave as in the C language:
+.Pp
+.Bl -tag -width 2n -compact
+.It Ic +
+addition
+.It Ic -
+subtraction
+.It Ic *
+multiplication
+.It Ic /
+division
+.It Ic %
+remainder of division
+.It Ic <
+less than
+.It Ic >
+greater than
+.It Ic ==
+equal to
+.It Ic =
+equal to, same effect as
+.Ic ==
+(this differs from C)
+.It Ic <=
+less than or equal to
+.It Ic >=
+greater than or equal to
+.It Ic <>
+not equal to (corresponds to C
+.Ic != ;
+this one is of limited portability, it is supported by Heirloom roff,
+but not by groff)
+.It Ic &
+logical and (corresponds to C
+.Ic && )
+.It Ic \&:
+logical or (corresponds to C
+.Ic || )
+.It Ic <?
+minimum (not available in C)
+.It Ic >?
+maximum (not available in C)
+.El
+.Pp
+There is no concept of precedence; evaluation proceeds from left to right,
+except when subexpressions are enclosed in parentheses.
+Inside parentheses, whitespace is ignored.
+.Sh ESCAPE SEQUENCE REFERENCE
+The
+.Xr mandoc 1
+.Nm
+parser recognises the following escape sequences.
+Note that the
+.Nm
+language defines more escape sequences not implemented in
+.Xr mandoc 1 .
+In
+.Xr mdoc 7
+and
+.Xr man 7
+documents, using escape sequences is discouraged except for those
+described in the
+.Sx LANGUAGE SYNTAX
+section above.
+.Pp
+A backslash followed by any character not listed here
+simply prints that character itself.
+.Ss \e<newline>
+A backslash at the end of an input line can be used to continue the
+logical input line on the next physical input line, joining the text
+on both lines together as if it were on a single input line.
+.Ss \e<space>
+The escape sequence backslash-space
+.Pq Sq \e\ \&
+is an unpaddable space-sized non-breaking space character; see
+.Sx Whitespace .
+.Ss \e\(dq
+The rest of the input line is treated as
+.Sx Comments .
+.Ss \e%
+Hyphenation allowed at this point of the word; ignored by
+.Xr mandoc 1 .
+.Ss \e&
+Non-printing zero-width character; see
+.Sx Whitespace .
+.Ss \e\(aq
+Acute accent special character; use
+.Sq \e(aa
+instead.
+.Ss \e( Ns Ar cc
+.Sx Special Characters
+with two-letter names, see
+.Xr mandoc_char 7 .
+.Ss \e*[ Ns Ar name ]
+Interpolate the string with the
+.Ar name ;
+see
+.Sx Predefined Strings
+and
+.Sx ds .
+For short names, there are variants
+.No \e* Ns Ar c
+and
+.No \e*( Ns Ar cc .
+.Ss \e,
+Left italic correction (groff extension); ignored by
+.Xr mandoc 1 .
+.Ss \e-
+Special character
+.Dq mathematical minus sign .
+.Ss \e/
+Right italic correction (groff extension); ignored by
+.Xr mandoc 1 .
+.Ss \e[ Ns Ar name ]
+.Sx Special Characters
+with names of arbitrary length, see
+.Xr mandoc_char 7 .
+.Ss \e^
+One-twelfth em half-narrow space character, effectively zero-width in
+.Xr mandoc 1 .
+.Ss \e`
+Grave accent special character; use
+.Sq \e(ga
+instead.
+.Ss \e{
+Begin conditional input; see
+.Sx if .
+.Ss \e\(ba
+One-sixth em narrow space character, effectively zero-width in
+.Xr mandoc 1 .
+.Ss \e}
+End conditional input; see
+.Sx if .
+.Ss \e~
+Paddable non-breaking space character.
+.Ss \e0
+Digit width space character.
+.Ss \eA\(aq Ns Ar string Ns \(aq
+Anchor definition; ignored by
+.Xr mandoc 1 .
+.Ss \eB\(aq Ns Ar string Ns \(aq
+Interpolate
+.Sq 1
+if
+.Ar string
+conforms to the syntax of
+.Sx Numerical expressions
+explained above and
+.Sq 0
+otherwise.
+.Ss \eb\(aq Ns Ar string Ns \(aq
+Bracket building function; ignored by
+.Xr mandoc 1 .
+.Ss \eC\(aq Ns Ar name Ns \(aq
+.Sx Special Characters
+with names of arbitrary length.
+.Ss \ec
+When encountered at the end of an input text line,
+the next input text line is considered to continue that line,
+even if there are request or macro lines in between.
+No whitespace is inserted.
+.Ss \eD\(aq Ns Ar string Ns \(aq
+Draw graphics function; ignored by
+.Xr mandoc 1 .
+.Ss \ed
+Move down by half a line; ignored by
+.Xr mandoc 1 .
+.Ss \ee
+Backslash special character.
+.Ss \eF[ Ns Ar name ]
+Switch font family (groff extension); ignored by
+.Xr mandoc 1 .
+For short names, there are variants
+.No \eF Ns Ar c
+and
+.No \eF( Ns Ar cc .
+.Ss \ef[ Ns Ar name ]
+Switch to the font
+.Ar name ,
+see
+.Sx Text Decoration .
+For short names, there are variants
+.No \ef Ns Ar c
+and
+.No \ef( Ns Ar cc .
+.Ss \eg[ Ns Ar name ]
+Interpolate the format of a number register; ignored by
+.Xr mandoc 1 .
+For short names, there are variants
+.No \eg Ns Ar c
+and
+.No \eg( Ns Ar cc .
+.Ss \eH\(aq Ns Oo +|- Oc Ns Ar number Ns \(aq
+Set the height of the current font; ignored by
+.Xr mandoc 1 .
+.Ss \eh\(aq Ns Ar width Ns \(aq
+Horizontal motion relative to the current position.
+The default scaling unit is
+.Cm m .
+.Ss \ek[ Ns Ar name ]
+Mark horizontal input place in register; ignored by
+.Xr mandoc 1 .
+For short names, there are variants
+.No \ek Ns Ar c
+and
+.No \ek( Ns Ar cc .
+.Ss \eL\(aq Ns Ar number Ns Oo Ar c Oc Ns \(aq
+Vertical line drawing function; ignored by
+.Xr mandoc 1 .
+.Ss \el\(aq Ns Ar width Ns Oo Ar c Oc Ns \(aq
+Draw a horizontal line of
+.Ar width
+using the glyph
+.Ar c .
+.Ss \eM[ Ns Ar name ]
+Set fill (background) color (groff extension); ignored by
+.Xr mandoc 1 .
+For short names, there are variants
+.No \eM Ns Ar c
+and
+.No \eM( Ns Ar cc .
+.Ss \em[ Ns Ar name ]
+Set glyph drawing color (groff extension); ignored by
+.Xr mandoc 1 .
+For short names, there are variants
+.No \em Ns Ar c
+and
+.No \em( Ns Ar cc .
+.Ss \eN\(aq Ns Ar number Ns \(aq
+Character
+.Ar number
+on the current font.
+.Ss \en[ Ns Ar name ]
+Interpolate the number register
+.Ar name .
+For short names, there are variants
+.No \en Ns Ar c
+and
+.No \en( Ns Ar cc .
+.Ss \eo\(aq Ns Ar string Ns \(aq
+Overstrike, writing all the characters contained in the
+.Ar string
+to the same output position.
+In terminal and HTML output modes,
+only the last one of the characters is visible.
+.Ss \ep
+Break the output line at the end of the current word.
+.Ss \eR\(aq Ns Ar name Oo +|- Oc Ns Ar number Ns \(aq
+Set number register; ignored by
+.Xr mandoc 1 .
+.Ss \eS\(aq Ns Ar number Ns \(aq
+Slant output; ignored by
+.Xr mandoc 1 .
+.Ss \es\(aq Ns Oo +|- Oc Ns Ar number Ns \(aq
+Change point size; ignored by
+.Xr mandoc 1 .
+Alternative forms
+.No \es Ns Oo +|- Oc Ns Ar n ,
+.No \es Ns Oo +|- Oc Ns \(aq Ns Ar number Ns \(aq ,
+.No \es Ns [ Oo +|- Oc Ns Ar number ] ,
+and
+.No \es Ns Oo +|- Oc Ns [ Ar number Ns ]
+are also parsed and ignored.
+.Ss \et
+Horizontal tab; ignored by
+.Xr mandoc 1 .
+.Ss \eu
+Move up by half a line; ignored by
+.Xr mandoc 1 .
+.Ss \eV[ Ns Ar name ]
+Interpolate an environment variable; ignored by
+.Xr mandoc 1 .
+For short names, there are variants
+.No \eV Ns Ar c
+and
+.No \eV( Ns Ar cc .
+.Ss \ev\(aq Ns Ar number Ns \(aq
+Vertical motion; ignored by
+.Xr mandoc 1 .
+.Ss \ew\(aq Ns Ar string Ns \(aq
+Interpolate the width of the
+.Ar string .
+The
+.Xr mandoc 1
+implementation assumes that after expansion of user-defined strings, the
+.Ar string
+only contains normal characters, no escape sequences, and that each
+character has a width of 24 basic units.
+.Ss \eX\(aq Ns Ar string Ns \(aq
+Output
+.Ar string
+as device control function; ignored in nroff mode and by
+.Xr mandoc 1 .
+.Ss \ex\(aq Ns Ar number Ns \(aq
+Extra line space function; ignored by
+.Xr mandoc 1 .
+.Ss \eY[ Ns Ar name ]
+Output a string as a device control function; ignored in nroff mode and by
+.Xr mandoc 1 .
+For short names, there are variants
+.No \eY Ns Ar c
+and
+.No \eY( Ns Ar cc .
+.Ss \eZ\(aq Ns Ar string Ns \(aq
+Print
+.Ar string
+with zero width and height; ignored by
+.Xr mandoc 1 .
+.Ss \ez
+Output the next character without advancing the cursor position.
 .Sh COMPATIBILITY
-This section documents compatibility between mandoc and other other
+The
+.Xr mandoc 1
+implementation of the
 .Nm
-implementations, at this time limited to GNU troff
-.Pq Qq groff .
-The term
-.Qq historic groff
-refers to groff version 1.15.
+language is intentionally incomplete.
+Unimplemented features include:
 .Pp
 .Bl -dash -compact
 .It
-In mandoc, the
-.Sx \&EQ ,
-.Sx \&TE ,
-.Sx \&TS ,
-and
-.Sx \&T& ,
-macros are considered regular macros.
-In all other
-.Nm
-implementations, these are special macros that must be specified without
-spacing between the control character (which must be a period) and the
-macro name.
+For security reasons,
+.Xr mandoc 1
+never reads or writes external files except via
+.Sx \&so
+requests with safe relative paths.
 .It
+There is no automatic hyphenation, no adjustment to the right margin,
+and no centering; the output is always set flush-left.
+.It
+Support for setting tabulator positions
+and tabulator and leader characters is missing,
+and support for manually changing indentation is limited.
+.It
 The
-.Cm nS
-register is only compatible with OpenBSD's groff-1.15.
+.Sq u
+scaling unit is the default terminal unit.
+In traditional troff systems, this unit changes depending on the
+output media.
 .It
-Historic groff did not accept white-space before a custom
-.Ar end
-macro for the
-.Sx \&ig
-request.
+Width measurements are implemented in a crude way
+and often yield wrong results.
+Explicit movement requests and escapes are ignored.
 .It
+There is no concept of output pages, no support for floats,
+graphics drawing, and picture inclusion;
+terminal output is always continuous.
+.It
+Requests regarding color, font families, and glyph manipulation
+are ignored.
+Font support is very limited.
+Kerning is not implemented, and no ligatures are produced.
+.It
 The
-.Sx \&if
-and family would print funny white-spaces with historic groff when
-using the next-line syntax.
+.Qq \(aq
+macro control character does not suppress output line breaks.
+.It
+Diversions are not implemented,
+and support for traps is very incomplete.
+.It
+While recursion is supported,
+.Sx \&while
+loops are not.
 .El
+.Pp
+The special semantics of the
+.Cm nS
+number register is an idiosyncracy of
+.Ox
+manuals and not supported by other
+.Xr mdoc 7
+implementations.
 .Sh SEE ALSO
 .Xr mandoc 1 ,
 .Xr eqn 7 ,
@@ -982,8 +2174,6 @@ In 1989, James Clarke re-implemented troff in C++, nam
 This
 .Nm
 reference was written by
-.An Kristaps Dzonsons ,
-.Mt kristaps@bsd.lv ;
+.An Kristaps Dzonsons Aq Mt kristaps@bsd.lv
 and
-.An Ingo Schwarze ,
-.Mt schwarze@openbsd.org .
+.An Ingo Schwarze Aq Mt schwarze@openbsd.org .