===================================================================
RCS file: /cvs/mandoc/roff.7,v
retrieving revision 1.20
retrieving revision 1.74
diff -u -p -r1.20 -r1.74
--- mandoc/roff.7	2011/01/03 16:04:41	1.20
+++ mandoc/roff.7	2015/08/29 22:40:05	1.74
@@ -1,7 +1,7 @@
-.\"	$Id: roff.7,v 1.20 2011/01/03 16:04:41 kristaps Exp $
+.\"	$Id: roff.7,v 1.74 2015/08/29 22:40:05 schwarze Exp $
 .\"
-.\" Copyright (c) 2010 Kristaps Dzonsons <kristaps@bsd.lv>
-.\" Copyright (c) 2010 Ingo Schwarze <schwarze@openbsd.org>
+.\" Copyright (c) 2010, 2011, 2012 Kristaps Dzonsons <kristaps@bsd.lv>
+.\" Copyright (c) 2010, 2011, 2013-2015 Ingo Schwarze <schwarze@openbsd.org>
 .\"
 .\" Permission to use, copy, modify, and distribute this software for any
 .\" purpose with or without fee is hereby granted, provided that the above
@@ -15,7 +15,7 @@
 .\" ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
 .\" OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
 .\"
-.Dd $Mdocdate: January 3 2011 $
+.Dd $Mdocdate: August 29 2015 $
 .Dt ROFF 7
 .Os
 .Sh NAME
@@ -25,42 +25,291 @@
 The
 .Nm roff
 language is a general purpose text formatting language.
-In particular, it serves as the basis for the
+Since traditional implementations of the
 .Xr mdoc 7
 and
 .Xr man 7
-manual formatting macro languages.
-This manual describes the subset of the
+manual formatting languages are based on it,
+many real-world manuals use small numbers of
 .Nm
-language accepted by the
+requests and escape sequences intermixed with their
+.Xr mdoc 7
+or
+.Xr man 7
+code.
+To properly format such manuals, the
 .Xr mandoc 1
-utility.
+utility supports a tiny subset of
+.Nm
+requests and escapes.
+Only these requests and escapes supported by
+.Xr mandoc 1
+are documented in the present manual,
+together with the basic language syntax shared by
+.Nm ,
+.Xr mdoc 7 ,
+and
+.Xr man 7 .
+For complete
+.Nm
+manuals, consult the
+.Sx SEE ALSO
+section.
 .Pp
-Input lines beginning with the control characters
+Input lines beginning with the control character
 .Sq \&.
-or
-.Sq \(aq
 are parsed for requests and macros.
-These define the document structure, change the processing state
-and manipulate the formatting.
-Some requests and macros also produce formatted output,
-while others do not.
+Such lines are called
+.Dq request lines
+or
+.Dq macro lines ,
+respectively.
+Requests change the processing state and manipulate the formatting;
+some macros also define the document structure and produce formatted
+output.
+The single quote
+.Pq Qq \(aq
+is accepted as an alternative control character,
+treated by
+.Xr mandoc 1
+just like
+.Ql \&.
 .Pp
-All other input lines provide free-form text to be printed;
-the formatting of free-form text depends on the respective
-processing context.
+Lines not beginning with control characters are called
+.Dq text lines .
+They provide free-form text to be printed; the formatting of the text
+depends on the respective processing context.
 .Sh LANGUAGE SYNTAX
 .Nm
 documents may contain only graphable 7-bit ASCII characters, the space
 character, and, in certain circumstances, the tab character.
-To produce other characters in the output, use the escape sequences
-documented in the
+The backslash character
+.Sq \e
+indicates the start of an escape sequence, used for example for
+.Sx Comments ,
+.Sx Special Characters ,
+.Sx Predefined Strings ,
+and
+user-defined strings defined using the
+.Sx ds
+request.
+For a listing of escape sequences, consult the
+.Sx ESCAPE SEQUENCE REFERENCE
+below.
+.Ss Comments
+Text following an escaped double-quote
+.Sq \e\(dq ,
+whether in a request, macro, or text line, is ignored to the end of the line.
+A request line beginning with a control character and comment escape
+.Sq \&.\e\(dq
+is also ignored.
+Furthermore, request lines with only a control character and optional
+trailing whitespace are stripped from input.
+.Pp
+Examples:
+.Bd -literal -offset indent -compact
+\&.\e\(dq This is a comment line.
+\&.\e\(dq The next line is ignored:
+\&.
+\&.Sh EXAMPLES \e\(dq This is a comment, too.
+\&example text \e\(dq And so is this.
+.Ed
+.Ss Special Characters
+Special characters are used to encode special glyphs and are rendered
+differently across output media.
+They may occur in request, macro, and text lines.
+Sequences begin with the escape character
+.Sq \e
+followed by either an open-parenthesis
+.Sq \&(
+for two-character sequences; an open-bracket
+.Sq \&[
+for n-character sequences (terminated at a close-bracket
+.Sq \&] ) ;
+or a single one character sequence.
+.Pp
+Examples:
+.Bl -tag -width Ds -offset indent -compact
+.It Li \e(em
+Two-letter em dash escape.
+.It Li \ee
+One-letter backslash escape.
+.El
+.Pp
+See
 .Xr mandoc_char 7
-manual.
+for a complete list.
+.Ss Text Decoration
+Terms may be text-decorated using the
+.Sq \ef
+escape followed by an indicator: B (bold), I (italic), R (regular), or P
+(revert to previous mode).
+A numerical representation 3, 2, or 1 (bold, italic, and regular,
+respectively) may be used instead.
+The indicator or numerical representative may be preceded by C
+(constant-width), which is ignored.
 .Pp
-All manuals must have
-.Ux
-line terminators.
+The two-character indicator
+.Sq BI
+requests a font that is both bold and italic.
+It may not be portable to old roff implementations.
+.Pp
+Examples:
+.Bl -tag -width Ds -offset indent -compact
+.It Li \efBbold\efR
+Write in \fBbold\fP, then switch to regular font mode.
+.It Li \efIitalic\efP
+Write in \fIitalic\fP, then return to previous font mode.
+.It Li \ef(BIbold italic\efP
+Write in \f(BIbold italic\fP, then return to previous font mode.
+.El
+.Pp
+Text decoration is
+.Em not
+recommended for
+.Xr mdoc 7 ,
+which encourages semantic annotation.
+.Ss Predefined Strings
+Predefined strings, like
+.Sx Special Characters ,
+mark special output glyphs.
+Predefined strings are escaped with the slash-asterisk,
+.Sq \e* :
+single-character
+.Sq \e*X ,
+two-character
+.Sq \e*(XX ,
+and N-character
+.Sq \e*[N] .
+.Pp
+Examples:
+.Bl -tag -width Ds -offset indent -compact
+.It Li \e*(Am
+Two-letter ampersand predefined string.
+.It Li \e*q
+One-letter double-quote predefined string.
+.El
+.Pp
+Predefined strings are not recommended for use,
+as they differ across implementations.
+Those supported by
+.Xr mandoc 1
+are listed in
+.Xr mandoc_char 7 .
+Manuals using these predefined strings are almost certainly not portable.
+.Ss Whitespace
+Whitespace consists of the space character.
+In text lines, whitespace is preserved within a line.
+In request and macro lines, whitespace delimits arguments and is discarded.
+.Pp
+Unescaped trailing spaces are stripped from text line input unless in a
+literal context.
+In general, trailing whitespace on any input line is discouraged for
+reasons of portability.
+In the rare case that a blank character is needed at the end of an
+input line, it may be forced by
+.Sq \e\ \e& .
+.Pp
+Literal space characters can be produced in the output
+using escape sequences.
+In macro lines, they can also be included in arguments using quotation; see
+.Sx MACRO SYNTAX
+for details.
+.Pp
+Blank text lines, which may include whitespace, are only permitted
+within literal contexts.
+If the first character of a text line is a space, that line is printed
+with a leading newline.
+.Ss Scaling Widths
+Many requests and macros support scaled widths for their arguments.
+The syntax for a scaled width is
+.Sq Li [+-]?[0-9]*.[0-9]*[:unit:] ,
+where a decimal must be preceded or followed by at least one digit.
+Negative numbers, while accepted, are truncated to zero.
+.Pp
+The following scaling units are accepted:
+.Pp
+.Bl -tag -width Ds -offset indent -compact
+.It c
+centimetre
+.It i
+inch
+.It P
+pica (~1/6 inch)
+.It p
+point (~1/72 inch)
+.It f
+scale
+.Sq u
+by 65536
+.It v
+default vertical span
+.It m
+width of rendered
+.Sq m
+.Pq em
+character
+.It n
+width of rendered
+.Sq n
+.Pq en
+character
+.It u
+default horizontal span for the terminal
+.It M
+mini-em (~1/100 em)
+.El
+.Pp
+Using anything other than
+.Sq m ,
+.Sq n ,
+or
+.Sq v
+is necessarily non-portable across output media.
+See
+.Sx COMPATIBILITY .
+.Pp
+If a scaling unit is not provided, the numerical value is interpreted
+under the default rules of
+.Sq v
+for vertical spaces and
+.Sq u
+for horizontal ones.
+.Pp
+Examples:
+.Bl -tag -width ".Bl -tag -width 2i" -offset indent -compact
+.It Li \&.Bl -tag -width 2i
+two-inch tagged list indentation in
+.Xr mdoc 7
+.It Li \&.HP 2i
+two-inch tagged list indentation in
+.Xr man 7
+.It Li \&.sp 2v
+two vertical spaces
+.El
+.Ss Sentence Spacing
+Each sentence should terminate at the end of an input line.
+By doing this, a formatter will be able to apply the proper amount of
+spacing after the end of sentence (unescaped) period, exclamation mark,
+or question mark followed by zero or more non-sentence closing
+delimiters
+.Po
+.Sq \&) ,
+.Sq \&] ,
+.Sq \&' ,
+.Sq \&"
+.Pc .
+.Pp
+The proper spacing is also intelligently preserved if a sentence ends at
+the boundary of a macro line.
+.Pp
+Examples:
+.Bd -literal -offset indent -compact
+Do not end sentences mid-line like this.  Instead,
+end a sentence like this.
+A macro would end like this:
+\&.Xr mandoc 1 \&.
+.Ed
 .Sh REQUEST SYNTAX
 A request or macro line consists of:
 .Pp
@@ -86,43 +335,259 @@ Thus, the following request lines are all equivalent:
 \&.ig    end
 \&.   ig end
 .Ed
+.Sh MACRO SYNTAX
+Macros are provided by the
+.Xr mdoc 7
+and
+.Xr man 7
+languages and can be defined by the
+.Sx \&de
+request.
+When called, they follow the same syntax as requests, except that
+macro arguments may optionally be quoted by enclosing them
+in double quote characters
+.Pq Sq \(dq .
+Quoted text, even if it contains whitespace or would cause
+a macro invocation when unquoted, is always considered literal text.
+Inside quoted text, pairs of double quote characters
+.Pq Sq Qq
+resolve to single double quote characters.
+.Pp
+To be recognised as the beginning of a quoted argument, the opening
+quote character must be preceded by a space character.
+A quoted argument extends to the next double quote character that is not
+part of a pair, or to the end of the input line, whichever comes earlier.
+Leaving out the terminating double quote character at the end of the line
+is discouraged.
+For clarity, if more arguments follow on the same input line,
+it is recommended to follow the terminating double quote character
+by a space character; in case the next character after the terminating
+double quote character is anything else, it is regarded as the beginning
+of the next, unquoted argument.
+.Pp
+Both in quoted and unquoted arguments, pairs of backslashes
+.Pq Sq \e\e
+resolve to single backslashes.
+In unquoted arguments, space characters can alternatively be included
+by preceding them with a backslash
+.Pq Sq \e\~ ,
+but quoting is usually better for clarity.
+.Pp
+Examples:
+.Bl -tag -width Ds -offset indent -compact
+.It Li .Fn strlen \(dqconst char *s\(dq
+Group arguments
+.Qq const char *s
+into one function argument.
+If unspecified,
+.Qq const ,
+.Qq char ,
+and
+.Qq *s
+would be considered separate arguments.
+.It Li .Op \(dqFl a\(dq
+Consider
+.Qq \&Fl a
+as literal text instead of a flag macro.
+.El
 .Sh REQUEST REFERENCE
 The
 .Xr mandoc 1
 .Nm
-parser recognizes the following requests.
-Note that the
-.Nm
-language defines many more requests not implemented in
-.Xr mandoc 1 .
+parser recognises the following requests.
+For requests marked as "ignored" or "unsupported", any arguments are
+ignored, and the number of arguments is not checked.
+.Ss \&ab
+Abort processing.
+Currently unsupported.
 .Ss \&ad
 Set line adjustment mode.
-This line-scoped request is intended to have one argument to select
-normal, left, right, or center adjustment for subsequent text.
-Currently, it is ignored including its arguments,
-and the number of arguments is not checked.
+It takes one argument to select normal, left, right,
+or center adjustment for subsequent text.
+Currently ignored.
+.Ss \&af
+Assign an output format to a number register.
+Currently ignored.
+.Ss \&aln
+Create an alias for a number register.
+Currently unsupported.
+.Ss \&als
+Create an alias for a request, string, macro, or diversion.
+Currently unsupported.
 .Ss \&am
 Append to a macro definition.
 The syntax of this request is the same as that of
 .Sx \&de .
-It is currently ignored by
-.Xr mandoc 1 ,
-as are its children.
-.Ss \&ami
-Append to a macro definition, specifying the macro name indirectly.
-The syntax of this request is the same as that of
-.Sx \&dei .
-It is currently ignored by
-.Xr mandoc 1 ,
-as are its children.
 .Ss \&am1
 Append to a macro definition, switching roff compatibility mode off
-during macro execution.
+during macro execution (groff extension).
 The syntax of this request is the same as that of
 .Sx \&de1 .
-It is currently ignored by
-.Xr mandoc 1 ,
-as are its children.
+Since
+.Xr mandoc 1
+does not implement
+.Nm
+compatibility mode at all, it handles this request as an alias for
+.Sx \&am .
+.Ss \&ami
+Append to a macro definition, specifying the macro name indirectly
+(groff extension).
+The syntax of this request is the same as that of
+.Sx \&dei .
+.Ss \&ami1
+Append to a macro definition, specifying the macro name indirectly
+and switching roff compatibility mode off during macro execution
+(groff extension).
+The syntax of this request is the same as that of
+.Sx \&dei1 .
+Since
+.Xr mandoc 1
+does not implement
+.Nm
+compatibility mode at all, it handles this request as an alias for
+.Sx \&ami .
+.Ss \&as
+Append to a user-defined string.
+The syntax of this request is the same as that of
+.Sx \&ds .
+If a user-defined string with the specified name does not yet exist,
+it is set to the empty string before appending.
+.Ss \&as1
+Append to a user-defined string, switching roff compatibility mode off
+during macro execution (groff extension).
+The syntax of this request is the same as that of
+.Sx \&ds1 .
+Since
+.Xr mandoc 1
+does not implement
+.Nm
+compatibility mode at all, it handles this request as an alias for
+.Sx \&as .
+.Ss \&asciify
+Fully unformat a diversion.
+Currently unsupported.
+.Ss \&backtrace
+Print a backtrace of the input stack.
+This is a groff extension and currently ignored.
+.Ss \&bd
+Artificially embolden by repeated printing with small shifts.
+Currently ignored.
+.Ss \&bleedat
+Set the BleedBox page parameter for PDF generation.
+This is a Heirloom extension and currently ignored.
+.Ss \&blm
+Set a blank line trap.
+Currently unsupported.
+.Ss \&box
+Begin a diversion without including a partially filled line.
+Currently unsupported.
+.Ss \&boxa
+Add to a diversion without including a partially filled line.
+Currently unsupported.
+.Ss \&bp
+Begin new page.
+Currently ignored.
+.Ss \&BP
+Define a frame and place a picture in it.
+This is a Heirloom extension and currently unsupported.
+.Ss \&br
+Break the output line.
+See
+.Xr man 7
+and
+.Xr mdoc 7 .
+.Ss \&break
+Break out of a
+.Sx \&while
+loop.
+Currently unsupported.
+.Ss \&breakchar
+Optional line break characters.
+This is a Heirloom extension and currently ignored.
+.Ss \&brnl
+Break output line after next N input lines.
+This is a Heirloom extension and currently ignored.
+.Ss \&brp
+Break and spread output line.
+Currently, this is implemented as an alias for
+.Sx \&br .
+.Ss \&brpnl
+Break and spread output line after next N input lines.
+This is a Heirloom extension and currently ignored.
+.Ss \&c2
+Change the no-break control character.
+Currently unsupported.
+.Ss \&cc
+Change the control character.
+Its syntax is as follows:
+.Bd -literal -offset indent
+.Pf . Cm \&cc Op Ar c
+.Ed
+.Pp
+If
+.Ar c
+is not specified, the control character is reset to
+.Sq \&. .
+Trailing characters are ignored.
+.Ss \&ce
+Center some lines.
+It takes one integer argument, specifying how many lines to center.
+Currently ignored.
+.Ss \&cf
+Output the contents of a file.
+Ignored because insecure.
+.Ss \&cflags
+Set character flags.
+This is a groff extension and currently ignored.
+.Ss \&ch
+Change a trap location.
+Currently ignored.
+.Ss \&char
+Define a new glyph.
+Currently unsupported.
+.Ss \&chop
+Remove the last character from a macro, string, or diversion.
+Currently unsupported.
+.Ss \&class
+Define a character class.
+This is a groff extension and currently ignored.
+.Ss \&close
+Close an open file.
+Ignored because insecure.
+.Ss \&CL
+Print text in color.
+This is a Heirloom extension and currently unsupported.
+.Ss \&color
+Activate or deactivate colors.
+This is a groff extension and currently ignored.
+.Ss \&composite
+Define a name component for composite glyph names.
+This is a groff extension and currently unsupported.
+.Ss \&continue
+Immediately start the next iteration of a
+.Sx \&while
+loop.
+Currently unsupported.
+.Ss \&cp
+Switch
+.Nm
+compatibility mode on or off.
+Currently ignored.
+.Ss \&cropat
+Set the CropBox page parameter for PDF generation.
+This is a Heirloom extension and currently ignored.
+.Ss \&cs
+Constant character spacing mode.
+Currently ignored.
+.Ss \&cu
+Underline including whitespace.
+Currently ignored.
+.Ss \&da
+Append to a diversion.
+Currently unsupported.
+.Ss \&dch
+Change a trap location in the current diversion.
+This is a Heirloom extension and currently unsupported.
 .Ss \&de
 Define a
 .Nm
@@ -174,12 +639,9 @@ The macro can be invoked later using the syntax
 .Pp
 .D1 Pf . Ar name Op Ar argument Op Ar argument ...
 .Pp
-Arguments are separated by blank characters and can be quoted
-using double-quotes
-.Pq Sq \(dq
-to allow inclusion of blank characters into arguments.
-To include the double-quote character into a quoted argument,
-escape it from ending the argument by doubling it.
+Regarding argument parsing, see
+.Sx MACRO SYNTAX
+above.
 .Pp
 The line invoking the macro will be replaced
 in the input stream by the
@@ -203,6 +665,8 @@ produces
 .D1 \efI\e^XtFree\e^\efP.
 .Pp
 in the input stream, and thus in the output: \fI\^XtFree\^\fP.
+Each occurrence of \e\e$* is replaced with all the arguments,
+joined together with single blank characters.
 .Pp
 Since macros and user-defined strings share a common string table,
 defining a macro
@@ -221,32 +685,66 @@ one explicit newline character.
 In order to prevent endless recursion, both groff and
 .Xr mandoc 1
 limit the stack depth for expanding macros and strings
-to a large, but finite number.
-Do not rely on the exact value of this limit.
+to a large, but finite number, and
+.Xr mandoc 1
+also limits the length of the expanded input line.
+Do not rely on the exact values of these limits.
+.Ss \&de1
+Define a
+.Nm
+macro that will be executed with
+.Nm
+compatibility mode switched off during macro execution.
+This is a groff extension.
+Since
+.Xr mandoc 1
+does not implement
+.Nm
+compatibility mode at all, it handles this request as an alias for
+.Sx \&de .
+.Ss \&defcolor
+Define a color name.
+This is a groff extension and currently ignored.
 .Ss \&dei
 Define a
 .Nm
-macro, specifying the macro name indirectly.
+macro, specifying the macro name indirectly (groff extension).
 The syntax of this request is the same as that of
 .Sx \&de .
-It is currently ignored by
-.Xr mandoc 1 ,
-as are its children.
-.Ss \&de1
+The request
+.Pp
+.D1 Pf . Cm \&dei Ar name Op Ar end
+.Pp
+has the same effect as:
+.Pp
+.D1 Pf . Cm \&de No \e* Ns Bo Ar name Bc Op \e* Ns Bq Ar end
+.Ss \&dei1
 Define a
 .Nm
 macro that will be executed with
 .Nm
-compatibility mode switched off during macro execution.
-This is a GNU extension not available in traditional
-.Nm
-implementations and not even in older versions of groff.
+compatibility mode switched off during macro execution,
+specifying the macro name indirectly (groff extension).
 Since
 .Xr mandoc 1
 does not implement
 .Nm
 compatibility mode at all, it handles this request as an alias for
-.Sx \&de .
+.Sx \&dei .
+.Ss \&device
+This request only makes sense with the groff-specific intermediate
+output format and is unsupported.
+.Ss \&devicem
+This request only makes sense with the groff-specific intermediate
+output format and is unsupported.
+.Ss \&di
+Begin a diversion.
+Currently unsupported.
+.Ss \&do
+Execute
+.Nm
+request or macro line with compatibility mode disabled.
+Currently unsupported.
 .Ss \&ds
 Define a user-defined string.
 Its syntax is as follows:
@@ -305,6 +803,32 @@ macro when used in a
 .Xr man 7
 document.
 Such abuse is of course strongly discouraged.
+.Ss \&ds1
+Define a user-defined string that will be expanded with
+.Nm
+compatibility mode switched off during string expansion.
+This is a groff extension.
+Since
+.Xr mandoc 1
+does not implement
+.Nm
+compatibility mode at all, it handles this request as an alias for
+.Sx \&ds .
+.Ss \&dwh
+Set a location trap in the current diversion.
+This is a Heirloom extension and currently unsupported.
+.Ss \&dt
+Set a trap within a diversion.
+Currently unsupported.
+.Ss \&ec
+Change the escape character.
+Currently unsupported.
+.Ss \&ecs
+Restore the escape character.
+Currently unsupported.
+.Ss \&ecr
+Save the escape character.
+Currently unsupported.
 .Ss \&el
 The
 .Qq else
@@ -319,9 +843,171 @@ then false is assumed.
 The syntax of this request is similar to
 .Sx \&if
 except that the conditional is missing.
+.Ss \&em
+Set a trap at the end of input.
+Currently unsupported.
+.Ss \&EN
+End an equation block.
+See
+.Sx \&EQ .
+.Ss \&eo
+Disable the escape mechanism completely.
+Currently unsupported.
+.Ss \&EP
+End a picture started by
+.Sx \&BP .
+This is a Heirloom extension and currently unsupported.
+.Ss \&EQ
+Begin an equation block.
+See
+.Xr eqn 7
+for a description of the equation language.
+.Ss \&errprint
+Print a string like an error message.
+This is a Heirloom extension and currently ignored.
+.Ss \&ev
+Switch to another environment.
+Currently unsupported.
+.Ss \&evc
+Copy an environment into the current environment.
+Currently unsupported.
+.Ss \&ex
+Abort processing and exit.
+Currently unsupported.
+.Ss \&fallback
+Select the fallback sequence for a font.
+This is a Heirloom extension and currently ignored.
+.Ss \&fam
+Change the font family.
+Takes one argument specifying the font family to be selected.
+It is a groff extension and currently ignored.
+.Ss \&fc
+Define a delimiting and a padding character for fields.
+Currently unsupported.
+.Ss \&fchar
+Define a fallback glyph.
+Currently unsupported.
+.Ss \&fcolor
+Set the fill color for \eD objects.
+This is a groff extension and currently ignored.
+.Ss \&fdeferlig
+Defer ligature building.
+This is a Heirloom extension and currently ignored.
+.Ss \&feature
+Enable or disable an OpenType feature.
+This is a Heirloom extension and currently ignored.
+.Ss \&fi
+Switch to fill mode.
+See
+.Xr man 7 .
+Ignored in
+.Xr mdoc 7 .
+.Ss \&fkern
+Control the use of kerning tables for a font.
+This is a Heirloom extension and currently ignored.
+.Ss \&fl
+Flush output.
+Currently ignored.
+.Ss \&flig
+Define ligatures.
+This is a Heirloom extension and currently ignored.
+.Ss \&fp
+Assign font position.
+Currently ignored.
+.Ss \&fps
+Mount a font with a special character map.
+This is a Heirloom extension and currently ignored.
+.Ss \&fschar
+Define a font-specific fallback glyph.
+This is a groff extension and currently unsupported.
+.Ss \&fspacewidth
+Set a font-specific width for the space character.
+This is a Heirloom extension and currently ignored.
+.Ss \&fspecial
+Conditionally define a special font.
+This is a groff extension and currently ignored.
+.Ss \&ft
+Change the font.
+Its syntax is as follows:
+.Pp
+.D1 Pf . Cm \&ft Op Ar font
+.Pp
+The following
+.Ar font
+arguments are supported:
+.Bl -tag -width 4n -offset indent
+.It Cm B , BI , 3 , 4
+switches to
+.Sy bold
+font
+.It Cm I , 2
+switches to
+.Em underlined
+font
+.It Cm R , CW , 1
+switches to normal font
+.It Cm P No "or no argument"
+switches back to the previous font
+.El
+.Pp
+This request takes effect only locally, may be overridden by macros
+and escape sequences, and is only supported in
+.Xr man 7
+for now.
+.Ss \&ftr
+Translate font name.
+This is a groff extension and currently ignored.
+.Ss \&fzoom
+Zoom font size.
+Currently ignored.
+.Ss \&gcolor
+Set glyph color.
+This is a groff extension and currently ignored.
+.Ss \&hc
+Set the hyphenation character.
+Currently ignored.
+.Ss \&hcode
+Set hyphenation codes of characters.
+Currently ignored.
+.Ss \&hidechar
+Hide characters in a font.
+This is a Heirloom extension and currently ignored.
+.Ss \&hla
+Set hyphenation language.
+This is a groff extension and currently ignored.
+.Ss \&hlm
+Set maximum number of consecutive hyphenated lines.
+Currently ignored.
+.Ss \&hpf
+Load hyphenation pattern file.
+This is a groff extension and currently ignored.
+.Ss \&hpfa
+Load hyphenation pattern file, appending to the current patterns.
+This is a groff extension and currently ignored.
+.Ss \&hpfcode
+Define mapping values for character codes in hyphenation patterns.
+This is a groff extension and currently ignored.
+.Ss \&hw
+Specify hyphenation points in words.
+Currently ignored.
 .Ss \&hy
 Set automatic hyphenation mode.
-This line-scoped request is currently ignored.
+Currently ignored.
+.Ss \&hylang
+Set hyphenation language.
+This is a Heirloom extension and currently ignored.
+.Ss \&hylen
+Minimum word length for hyphenation.
+This is a Heirloom extension and currently ignored.
+.Ss \&hym
+Set hyphenation margin.
+This is a groff extension and currently ignored.
+.Ss \&hypp
+Define hyphenation penalties.
+This is a Heirloom extension and currently ignored.
+.Ss \&hys
+Set hyphenation space.
+This is a groff extension and currently ignored.
 .Ss \&ie
 The
 .Qq if
@@ -334,10 +1020,72 @@ Its syntax is equivalent to
 .Sx \&if .
 .Ss \&if
 Begins a conditional.
-Right now, the conditional evaluates to true
-if and only if it starts with the letter
-.Sy n ,
-indicating processing in nroff style as opposed to troff style.
+This request has the following syntax:
+.Bd -literal -offset indent
+\&.if COND BODY
+.Ed
+.Bd -literal -offset indent
+\&.if COND \e{BODY
+BODY...\e}
+.Ed
+.Bd -literal -offset indent
+\&.if COND \e{\e
+BODY...
+\&.\e}
+.Ed
+.Pp
+COND is a conditional statement.
+Currently,
+.Xr mandoc 1
+supports the following subset of roff conditionals:
+.Bl -bullet
+.It
+If
+.Sq \&!
+is prefixed to COND, the condition is logically inverted.
+.It
+If the first character of COND is
+.Sq n
+.Pq nroff mode
+or
+.Sq o
+.Pq odd page ,
+COND evaluates to true.
+.It
+If the first character of COND is
+.Sq c
+.Pq character available ,
+.Sq d
+.Pq string defined ,
+.Sq e
+.Pq even page ,
+.Sq t
+.Pq troff mode ,
+or
+.Sq v
+.Pq vroff mode ,
+COND evaluates to false.
+.It
+If the first character of COND is
+.Sq r ,
+it evalutes to true if the rest of COND is the name of an existing
+number register; otherwise, it evaluates to false.
+.It
+If COND starts with a parenthesis or with an optionally signed
+integer number, it is evaluated according to the rules of
+.Sx Numerical expressions
+explained below.
+It evaluates to true if the result is positive,
+or to false if the result is zero or negative.
+.It
+Otherwise, the first character of COND is regarded as a delimiter
+and COND evaluates to true if the string extending from its first
+to its second occurrence is equal to the string extending from its
+second to its third occurrence.
+.It
+If COND cannot be parsed, it evaluates to false.
+.El
+.Pp
 If a conditional is false, its children are not processed, but are
 syntactically interpreted to preserve the integrity of the input
 document.
@@ -355,44 +1103,12 @@ will continue to syntactically interpret to the block 
 conditional.
 Sub-conditionals, in this case, obviously inherit the truth value of
 the parent.
-This request has the following syntax:
-.Bd -literal -offset indent
-\&.if COND \e{\e
-BODY...
-\&.\e}
-.Ed
-.Bd -literal -offset indent
-\&.if COND \e{ BODY
-BODY... \e}
-.Ed
-.Bd -literal -offset indent
-\&.if COND \e{ BODY
-BODY...
-\&.\e}
-.Ed
-.Bd -literal -offset indent
-\&.if COND \e
-BODY
-.Ed
 .Pp
-COND is a conditional statement.
-roff allows for complicated conditionals; mandoc is much simpler.
-At this time, mandoc supports only
-.Sq n ,
-evaluating to true;
-and
-.Sq t ,
-.Sq e ,
-and
-.Sq o ,
-evaluating to false.
-All other invocations are read up to the next end of line or space and
-evaluate as false.
-.Pp
 If the BODY section is begun by an escaped brace
 .Sq \e{ ,
-scope continues until a closing-brace escape sequence
-.Sq \.\e} .
+scope continues until the end of the input line containing the
+matching closing-brace escape sequence
+.Sq \e} .
 If the BODY is not enclosed in braces, scope continues until
 the end of the line.
 If the COND is followed by a BODY on the same line, whether after a
@@ -414,15 +1130,20 @@ than having the request or macro follow as
 The scope of a conditional is always parsed, but only executed if the
 conditional evaluates to true.
 .Pp
-Note that text following an
-.Sq \&.\e}
-escape sequence is discarded.
-Furthermore, if an explicit closing sequence
+Note that the
 .Sq \e}
-is specified in a free-form line, the entire line is accepted within the
-scope of the prior request, not only the text preceding the close, with the
+is converted into a zero-width escape sequence if not passed as a
+standalone macro
+.Sq \&.\e} .
+For example,
+.Pp
+.D1 \&.Fl a \e} b
+.Pp
+will result in
 .Sq \e}
-collapsing into a zero-width space.
+being considered an argument of the
+.Sq \&Fl
+macro.
 .Ss \&ig
 Ignore input.
 Its syntax can be either
@@ -467,33 +1188,181 @@ Otherwise, it only terminates the
 and arguments following it or the
 .Sq \&..
 request are discarded.
+.Ss \&in
+Change indentation.
+See
+.Xr man 7 .
+Ignored in
+.Xr mdoc 7 .
+.Ss \&index
+Find a substring in a string.
+This is a Heirloom extension and currently unsupported.
+.Ss \&it
+Set an input line trap.
+Its syntax is as follows:
+.Pp
+.D1 Pf . Cm it Ar expression macro
+.Pp
+The named
+.Ar macro
+will be invoked after processing the number of input text lines
+specified by the numerical
+.Ar expression .
+While evaluating the
+.Ar expression ,
+the unit suffixes described below
+.Sx Scaling Widths
+are ignored.
+.Ss \&itc
+Set an input line trap, not counting lines ending with \ec.
+Currently unsupported.
+.Ss \&IX
+To support the generation of a table of contents,
+.Xr pod2man 1
+emits this user-defined macro, usually without defining it.
+To avoid reporting large numbers of spurious errors,
+.Xr mandoc 1
+ignores it.
+.Ss \&kern
+Switch kerning on or off.
+Currently ignored.
+.Ss \&kernafter
+Increase kerning after some characters.
+This is a Heirloom extension and currently ignored.
+.Ss \&kernbefore
+Increase kerning before some characters.
+This is a Heirloom extension and currently ignored.
+.Ss \&kernpair
+Add a kerning pair to the kerning table.
+This is a Heirloom extension and currently ignored.
+.Ss \&lc
+Define a leader repetition character.
+Currently unsupported.
+.Ss \&lc_ctype
+Set the
+.Dv LC_CTYPE
+locale.
+This is a Heirloom extension and currently unsupported.
+.Ss \&lds
+Define a local string.
+This is a Heirloom extension and currently unsupported.
+.Ss \&length
+Count the number of input characters in a user-defined string.
+Currently unsupported.
+.Ss \&letadj
+Dynamic letter spacing and reshaping.
+This is a Heirloom extension and currently ignored.
+.Ss \&lf
+Change the line number for error messages.
+Ignored because insecure.
+.Ss \&lg
+Switch the ligature mechanism on or off.
+Currently ignored.
+.Ss \&lhang
+Hang characters at left margin.
+This is a Heirloom extension and currently ignored.
+.Ss \&linetabs
+Enable or disable line-tabs mode.
+This is a groff extension and currently unsupported.
+.Ss \&ll
+Change the output line length.
+Its syntax is as follows:
+.Pp
+.D1 Pf . Cm \&ll Op Oo +|- Oc Ns Ar width
+.Pp
+If the
+.Ar width
+argument is omitted, the line length is reset to its previous value.
+The default setting for terminal output is 78n.
+If a sign is given, the line length is added to or subtracted from;
+otherwise, it is set to the provided value.
+Using this request in new manuals is discouraged for several reasons,
+among others because it overrides the
+.Xr mandoc 1
+.Fl O Cm width
+command line option.
+.Ss \&lnr
+Set local number register.
+This is a Heirloom extension and currently unsupported.
+.Ss \&lnrf
+Set local floating-point register.
+This is a Heirloom extension and currently unsupported.
+.Ss \&lpfx
+Set a line prefix.
+This is a Heirloom extension and currently unsupported.
+.Ss \&ls
+Set line spacing.
+It takes one integer argument specifying the vertical distance of
+subsequent output text lines measured in v units.
+Currently ignored.
+.Ss \&lsm
+Set a leading spaces trap.
+This is a groff extension and currently unsupported.
+.Ss \&lt
+Set title line length.
+Currently ignored.
+.Ss \&mc
+Print margin character in the right margin.
+Currently ignored.
+.Ss \&mediasize
+Set the device media size.
+This is a Heirloom extension and currently ignored.
+.Ss \&minss
+Set minimum word space.
+This is a Heirloom extension and currently ignored.
+.Ss \&mk
+Mark vertical position.
+Currently ignored.
+.Ss \&mso
+Load a macro file.
+Ignored because insecure.
+.Ss \&na
+Disable adjusting without changing the adjustment mode.
+Currently ignored.
 .Ss \&ne
 Declare the need for the specified minimum vertical space
 before the next trap or the bottom of the page.
-This line-scoped request is currently ignored.
+Currently ignored.
+.Ss \&nf
+Switch to no-fill mode.
+See
+.Xr man 7 .
+Ignored by
+.Xr mdoc 7 .
 .Ss \&nh
 Turn off automatic hyphenation mode.
-This line-scoped request is currently ignored.
-.Ss \&rm
-Remove a request, macro or string.
-This request is intended to have one argument,
-the name of the request, macro or string to be undefined.
-Currently, it is ignored including its arguments,
-and the number of arguments is not checked.
+Currently ignored.
+.Ss \&nhychar
+Define hyphenation-inhibiting characters.
+This is a Heirloom extension and currently ignored.
+.Ss \&nm
+Print line numbers.
+Currently unsupported.
+.Ss \&nn
+Temporarily turn off line numbering.
+Currently unsupported.
+.Ss \&nop
+Exexute the rest of the input line as a request or macro line.
+Currently unsupported.
 .Ss \&nr
-Define a register.
+Define or change a register.
 A register is an arbitrary string value that defines some sort of state,
 which influences parsing and/or formatting.
 Its syntax is as follows:
 .Pp
-.D1 Pf \. Cm \&nr Ar name Ar value
+.D1 Pf \. Cm \&nr Ar name Oo +|- Oc Ns Ar expression
 .Pp
-The
-.Ar value
-may, at the moment, only be an integer.
-So far, only the following register
+For the syntax of
+.Ar expression ,
+see
+.Sx Numerical expressions
+below.
+If it is prefixed by a sign, the register will be
+incremented or decremented instead of assigned to.
+.Pp
+The following register
 .Ar name
-is recognised:
+is handled specially:
 .Bl -tag -width Ds
 .It Cm nS
 If set to a positive integer value, certain
@@ -512,6 +1381,142 @@ section with the
 .Cm \&Sh
 macro will reset this register.
 .El
+.Ss \&nrf
+Define or change a floating-point register.
+This is a Heirloom extension and currently unsupported.
+.Ss \&nroff
+Force nroff mode.
+This is a groff extension and currently ignored.
+.Ss \&ns
+Turn on no-space mode.
+Currently ignored.
+.Ss \&nx
+Abort processing of the current input file and process another one.
+Ignored because insecure.
+.Ss \&open
+Open a file for writing.
+Ignored because insecure.
+.Ss \&opena
+Open a file for appending.
+Ignored because insecure.
+.Ss \&os
+Output saved vertical space.
+Currently ignored.
+.Ss \&output
+Output directly to intermediate output.
+Not supported.
+.Ss \&padj
+Globally control paragraph-at-once adjustment.
+This is a Heirloom extension and currently ignored.
+.Ss \&papersize
+Set the paper size.
+This is a Heirloom extension and currently ignored.
+.Ss \&pc
+Change the page number character.
+Currently ignored.
+.Ss \&pev
+Print environments.
+This is a groff extension and currently ignored.
+.Ss \&pi
+Pipe output to a shell command.
+Ignored because insecure.
+.Ss \&PI
+Low-level request used by
+.Sx \&BP .
+This is a Heirloom extension and currently unsupported.
+.Ss \&pl
+Change page length.
+Takes one height argument.
+Currently ignored.
+.Ss \&pm
+Print names and sizes of macros, strings, and diversions.
+Currently ignored.
+.Ss \&pn
+Change page number of the next page.
+Currently ignored.
+.Ss \&pnr
+Print all number registers.
+Currently ignored.
+.Ss \&po
+Set horizontal page offset.
+Currently ignored.
+.Ss \&ps
+Change point size.
+Takes one numerical argument.
+Currently ignored.
+.Ss \&psbb
+Retrieve the bounding box of a PostScript file.
+Currently unsupported.
+.Ss \&pshape
+Set a special shape for the current paragraph.
+This is a Heirloom extension and currently unsupported.
+.Ss \&pso
+Include output of a shell command.
+Ignored because insecure.
+.Ss \&ptr
+Print the names and positions of all traps.
+This is a groff extension and currently ignored.
+.Ss \&pvs
+Change post-vertical spacing.
+This is a groff extension and currently ignored.
+.Ss \&rchar
+Remove glyph definitions.
+Currently unsupported.
+.Ss \&rd
+Read from standard input.
+Currently ignored.
+.Ss \&recursionlimit
+Set the maximum stack depth for recursive macros.
+This is a Heirloom extension and currently ignored.
+.Ss \&return
+Exit a macro and return to the caller.
+Currently unsupported.
+.Ss \&rfschar
+Remove font-specific fallback glyph definitions.
+Currently unsupported.
+.Ss \&rhang
+Hang characters at right margin.
+This is a Heirloom extension and currently ignored.
+.Ss \&rj
+Justify unfilled text to the right margin.
+Currently ignored.
+.Ss \&rm
+Remove a request, macro or string.
+Its syntax is as follows:
+.Pp
+.D1 Pf \. Cm \&rm Ar name
+.Ss \&rn
+Rename a request, macro, diversion, or string.
+Currently unsupported.
+.Ss \&rnn
+Rename a number register.
+Currently unsupported.
+.Ss \&rr
+Remove a register.
+Its syntax is as follows:
+.Pp
+.D1 Pf \. Cm \&rr Ar name
+.Ss \&rs
+End no-space mode.
+Currently ignored.
+.Ss \&rt
+Return to marked vertical position.
+Currently ignored.
+.Ss \&schar
+Define global fallback glyph.
+This is a groff extension and currently unsupported.
+.Ss \&sentchar
+Define sentence-ending characters.
+This is a Heirloom extension and currently ignored.
+.Ss \&shc
+Change the soft hyphen character.
+Currently ignored.
+.Ss \&shift
+Shift macro arguments.
+Currently unsupported.
+.Ss \&sizes
+Define permissible point sizes.
+This is a groff extension and currently ignored.
 .Ss \&so
 Include a source file.
 Its syntax is as follows:
@@ -523,229 +1528,586 @@ The
 will be read and its contents processed as input in place of the
 .Sq \&.so
 request line.
-To avoid inadvertant inclusion of unrelated files,
+To avoid inadvertent inclusion of unrelated files,
 .Xr mandoc 1
 only accepts relative paths not containing the strings
 .Qq ../
 and
 .Qq /.. .
-.Ss \&tr
-Output character translation.
-This request is intended to have one argument,
-consisting of an even number of characters.
-Currently, it is ignored including its arguments,
-and the number of arguments is not checked.
+.Pp
+This request requires
+.Xr man 1
+to change to the right directory before calling
+.Xr mandoc 1 ,
+per convention to the root of the manual tree.
+Typical usage looks like:
+.Pp
+.Dl \&.so man3/Xcursor.3
+.Pp
+As the whole concept is rather fragile, the use of
+.Sx \&so
+is discouraged.
+Use
+.Xr ln 1
+instead.
+.Ss \&spacewidth
+Set the space width from the font metrics file.
+This is a Heirloom extension and currently ignored.
+.Ss \&special
+Define a special font.
+This is a groff extension and currently ignored.
+.Ss \&spreadwarn
+Warn about wide spacing between words.
+Currently ignored.
+.Ss \&ss
+Set space character size.
+Currently ignored.
+.Ss \&sty
+Associate style with a font position.
+This is a groff extension and currently ignored.
+.Ss \&substring
+Replace a user-defined string with a substring.
+Currently unsupported.
+.Ss \&sv
+Save vertical space.
+Currently ignored.
+.Ss \&sy
+Execute shell command.
+Ignored because insecure.
 .Ss \&T&
 Re-start a table layout, retaining the options of the prior table
 invocation.
 See
 .Sx \&TS .
+.Ss \&ta
+Set tab stops.
+Takes an arbitrary number of arguments.
+Currently unsupported.
+.Ss \&tc
+Change tab repetion character.
+Currently unsupported.
 .Ss \&TE
 End a table context.
 See
 .Sx \&TS .
+.Ss \&ti
+Temporary indent.
+Currently unsupported.
+.Ss \&tkf
+Enable track kerning for a font.
+Currently ignored.
+.Ss \&tl
+Print a title line.
+Currently unsupported.
+.Ss \&tm
+Print to standard error output.
+Currently ignored.
+.Ss \&tm1
+Print to standard error output, allowing leading blanks.
+This is a groff extension and currently ignored.
+.Ss \&tmc
+Print to standard error output without a trailing newline.
+This is a groff extension and currently ignored.
+.Ss \&tr
+Output character translation.
+Its syntax is as follows:
+.Pp
+.D1 Pf \. Cm \&tr Ar [ab]+
+.Pp
+Pairs of
+.Ar ab
+characters are replaced
+.Ar ( a
+for
+.Ar b ) .
+Replacement (or origin) characters may also be character escapes; thus,
+.Pp
+.Dl tr \e(xx\e(yy
+.Pp
+replaces all invocations of \e(xx with \e(yy.
+.Ss \&track
+Static letter space tracking.
+This is a Heirloom extension and currently ignored.
+.Ss \&transchar
+Define transparent characters for sentence-ending.
+This is a Heirloom extension and currently ignored.
+.Ss \&trf
+Output the contents of a file, disallowing invalid characters.
+This is a groff extension and ignored because insecure.
+.Ss \&trimat
+Set the TrimBox page parameter for PDF generation.
+This is a Heirloom extension and currently ignored.
+.Ss \&trin
+Output character translation, ignored by
+.Cm \&asciify .
+Currently unsupported.
+.Ss \&trnt
+Output character translation, ignored by \e!.
+Currently unsupported.
+.Ss \&troff
+Force troff mode.
+This is a groff extension and currently ignored.
 .Ss \&TS
 Begin a table, which formats input in aligned rows and columns.
-A table consists of an optional single line of table options terminated
-by a semicolon, followed by one or more lines of layout specification
-terminated by a period, then table data.
-A table block may also include
-.Nm ,
-.Xr mdoc 7 ,
+See
+.Xr tbl 7
+for a description of the tbl language.
+.Ss \&uf
+Globally set the underline font.
+Currently ignored.
+.Ss \&ul
+Underline.
+Currently ignored.
+.Ss \&unformat
+Unformat spaces and tabs in a diversion.
+Currently unsupported.
+.Ss \&unwatch
+Disable notification for string or macro.
+This is a Heirloom extension and currently ignored.
+.Ss \&unwatchn
+Disable notification for register.
+This is a Heirloom extension and currently ignored.
+.Ss \&vpt
+Enable or disable vertical position traps.
+This is a groff extension and currently ignored.
+.Ss \&vs
+Change vertical spacing.
+Currently ignored.
+.Ss \&warn
+Set warning level.
+Currently ignored.
+.Ss \&warnscale
+Set the scaling indicator used in warnings.
+This is a groff extension and currently ignored.
+.Ss \&watch
+Notify on change of string or macro.
+This is a Heirloom extension and currently ignored.
+.Ss \&watchlength
+On change, report the contents of macros and strings
+up to the sepcified length.
+This is a Heirloom extension and currently ignored.
+.Ss \&watchn
+Notify on change of register.
+This is a Heirloom extension and currently ignored.
+.Ss \&wh
+Set a page location trap.
+Currently unsupported.
+.Ss \&while
+Repeated execution while a condition is true.
+Currently unsupported.
+.Ss \&write
+Write to an open file.
+Ignored because insecure.
+.Ss \&writec
+Write to an open file without appending a newline.
+Ignored because insecure.
+.Ss \&writem
+Write macro or string to an open file.
+Ignored because insecure.
+.Ss \&xflag
+Set the extension level.
+This is a Heirloom extension and currently ignored.
+.Ss Numerical expressions
+The
+.Sx \&nr ,
+.Sx \&if ,
+and
+.Sx \&ie
+requests accept integer numerical expressions as arguments.
+These are always evaluated using the C
+.Vt int
+type; integer overflow works the same way as in the C language.
+Numbers consist of an arbitrary number of digits
+.Sq 0
+to
+.Sq 9
+prefixed by an optional sign
+.Sq +
 or
-.Xr man 7
-macros.
-Example:
+.Sq - .
+Each number may be followed by one optional scaling unit described below
+.Sx Scaling Widths .
+The following equations hold:
 .Bd -literal -offset indent
-\&.TS
-box tab(:);   \e" Table-wide options.
-c | c         \e" Layout for first line.
-| c | c.      \e" Layout for all subsequent lines.
-1:2           \e" Data...
-3:4
-\&.TE
+1i = 6v = 6P = 10m = 10n = 72p = 1000M = 240u = 240
+254c = 100i = 24000u = 24000
+1f = 65536u = 65536
 .Ed
 .Pp
-Table data is
-.Em pre-processed ,
-that is, data rows are parsed then inserted into the underlying stream
-of input data.
-This allows data rows to be interspersed by arbitrary macros, such as
-.Bd -literal -offset indent
-\&.TS
-tab(:);
-c c c.
-1:2:3
-\&.Ao
-3:2:1
-\&.Ac
-\&.TE
-.Ed
+The following binary operators are implemented.
+Unless otherwise stated, they behave as in the C language:
 .Pp
-in the case of
+.Bl -tag -width 2n -compact
+.It Ic +
+addition
+.It Ic -
+subtraction
+.It Ic *
+multiplication
+.It Ic /
+division
+.It Ic %
+remainder of division
+.It Ic <
+less than
+.It Ic >
+greater than
+.It Ic ==
+equal to
+.It Ic =
+equal to, same effect as
+.Ic ==
+(this differs from C)
+.It Ic <=
+less than or equal to
+.It Ic >=
+greater than or equal to
+.It Ic <>
+not equal to (corresponds to C
+.Ic != ;
+this one is of limited portability, it is supported by Heirloom roff,
+but not by groff)
+.It Ic &
+logical and (corresponds to C
+.Ic && )
+.It Ic \&:
+logical or (corresponds to C
+.Ic \&|| )
+.It Ic <?
+minimum (not available in C)
+.It Ic >?
+maximum (not available in C)
+.El
+.Pp
+There is no concept of precendence; evaluation proceeds from left to right,
+except when subexpressions are enclosed in parantheses.
+Inside parentheses, whitespace is ignored.
+.Sh ESCAPE SEQUENCE REFERENCE
+The
+.Xr mandoc 1
+.Nm
+parser recognises the following escape sequences.
+Note that the
+.Nm
+language defines more escape sequences not implemented in
+.Xr mandoc 1 .
+In
 .Xr mdoc 7
-or
-.Bd -literal -offset indent
-\&.TS
-tab(:);
-c c c.
-\&.ds ab 2
-1:\e*(ab:3
-\&.I
-3:2:1
-\&.TE
-.Ed
+and
+.Xr man 7
+documents, using escape sequences is discouraged except for those
+described in the
+.Sx LANGUAGE SYNTAX
+section above.
 .Pp
-in the case of
-.Xr man 7 .
-.Pp
-The first line of a table consists of its options, which consists of
-space-separated keys and modifiers terminated by a semicolon.
-If the first line does not have a terminating semicolon, it is assumed
-that no options are specified and instead a layout is processed.
-Some options accept arguments enclosed by paranthesis.
-The following case-insensitive options are available:
-.Bl -tag -width Ds
-.It Cm center
-This option is not supported by
+A backslash followed by any character not listed here
+simply prints that character itself.
+.Ss \e<newline>
+A backslash at the end of an input line can be used to continue the
+logical input line on the next physical input line, joining the text
+on both lines together as if it were on a single input line.
+.Ss \e<space>
+The escape sequence backslash-space
+.Pq Sq \e\ \&
+is an unpaddable space-sized non-breaking space character; see
+.Sx Whitespace .
+.Ss \e\(dq
+The rest of the input line is treated as
+.Sx Comments .
+.Ss \e%
+Hyphenation allowed at this point of the word; ignored by
 .Xr mandoc 1 .
-This may also be invoked with
-.Cm centre .
-.It Cm delim
-Accepts a two-character argument.
-This option is not supported by
+.Ss \e&
+Non-printing zero-width character; see
+.Sx Whitespace .
+.Ss \e\(aq
+Acute accent special character; use
+.Sq \e(aa
+instead.
+.Ss \e( Ns Ar cc
+.Sx Special Characters
+with two-letter names, see
+.Xr mandoc_char 7 .
+.Ss \e*[ Ns Ar name ]
+Interpolate the string with the
+.Ar name ;
+see
+.Sx Predefined Strings
+and
+.Sx ds .
+For short names, there are variants
+.No \e* Ns Ar c
+and
+.No \e*( Ns Ar cc .
+.Ss \e,
+Left italic correction (groff extension); ignored by
 .Xr mandoc 1 .
-.It Cm expand
-This option is not supported by
+.Ss \e-
+Special character
+.Dq mathematical minus sign .
+.Ss \e/
+Right italic correction (groff extension); ignored by
 .Xr mandoc 1 .
-.It Cm box
-Draw a single-line box around the table.
-This may also be invoked with
-.Cm frame .
-.It Cm doublebox
-Draw a double-line box around the table.
-This may also be invoked with
-.Cm doubleframe .
-.It Cm allbox
-This option is not supported by
+.Ss \e[ Ns Ar name ]
+.Sx Special Characters
+with names of arbitrary length, see
+.Xr mandoc_char 7 .
+.Ss \e^
+One-twelfth em half-narrow space character, effectively zero-width in
 .Xr mandoc 1 .
-.It Cm tab
-Accepts a single-character argument.
-This character is used a delimiter between data cells, which otherwise
-defaults to the tab character.
-.It Cm linesize
-Accepts a natural number (all digits).
-This option is not supported by
+.Ss \e`
+Grave accent special character; use
+.Sq \e(ga
+instead.
+.Ss \e{
+Begin conditional input; see
+.Sx if .
+.Ss \e\(ba
+One-sixth em narrow space character, effectively zero-width in
 .Xr mandoc 1 .
-.It Cm nokeep
-This option is not supported by
+.Ss \e}
+End conditional input; see
+.Sx if .
+.Ss \e~
+Paddable non-breaking space character.
+.Ss \e0
+Digit width space character.
+.Ss \eA\(aq Ns Ar string Ns \(aq
+Anchor definition; ignored by
 .Xr mandoc 1 .
-.It Cm decimalpoint
-Accepts a single-character argument.
-This character will be used as the decimal point with the
-.Cm n
-layout key.
-This option is not supported by
+.Ss \eB\(aq Ns Ar string Ns \(aq
+Interpolate
+.Sq 1
+if
+.Ar string
+conforms to the syntax of
+.Sx Numerical expressions
+explained above and
+.Sq 0
+otherwise.
+.Ss \eb\(aq Ns Ar string Ns \(aq
+Bracket building function; ignored by
 .Xr mandoc 1 .
-.It Cm nospaces
-This option is not supported by
+.Ss \eC\(aq Ns Ar name Ns \(aq
+.Sx Special Characters
+with names of arbitrary length.
+.Ss \ec
+When encountered at the end of an input text line,
+the next input text line is considered to continue that line,
+even if there are request or macro lines in between.
+No whitespace is inserted.
+.Ss \eD\(aq Ns Ar string Ns \(aq
+Draw graphics function; ignored by
 .Xr mandoc 1 .
-.El
-.Pp
-The table layout follows table options, except in the case of
-.Sx \&T& ,
-where it immediately procedes invocation.
-Layout specifies how data rows are displayed on output.
-Each layout line corresponds to a line of data; the last layout line
-applies to all remaining data lines.
-Layout lines may also be separated by a comma.
-Each layout cell consists of one of the following case-insensitive keys:
-.Bl -tag -width Ds
-.It Cm c
-Centre a literal string within its column.
-.It Cm r
-Right-justify a literal string within its column.
-.It Cm l
-Left-justify a literal string within its column.
-.It Cm n
-Justify a number around its decimal point.
-If the decimal point is not found on the number, it's assumed to trail
-the number.
-.It Cm s
-This option is not supported by
+.Ss \ed
+Move down by half a line; ignored by
 .Xr mandoc 1 .
-.It Cm a
-This option is not supported by
+.Ss \ee
+Backslash special character.
+.Ss \eF[ Ns Ar name ]
+Switch font family (groff extension); ignored by
 .Xr mandoc 1 .
-.It Cm ^
-This option is not supported by
+For short names, there are variants
+.No \eF Ns Ar c
+and
+.No \eF( Ns Ar cc .
+.Ss \ef[ Ns Ar name ]
+Switch to the font
+.Ar name ,
+see
+.Sx Text Decoration .
+For short names, there are variants
+.No \ef Ns Ar c
+and
+.No \ef( Ns Ar cc .
+.Ss \eg[ Ns Ar name ]
+Interpolate the format of a number register; ignored by
 .Xr mandoc 1 .
-.It Cm \-
-This may also be invoked with
-.Cm _ .
-.It Cm =
-.It Cm \(ba
-Emit a vertical bar instead of data.
-.It Cm \(ba\(ba
-Emit a double-vertical bar instead of data.
-.El
-.Pp
-Keys may be followed by a set of modifiers.
-A modifier is either a modifier key or a natural number for specifying
-spacing.
-The following case-insensitive modifier keys are available:
-.Bl -tag -width Ds
-.It Cm z
-.It Cm u
-.It Cm e
-.It Cm t
-.It Cm d
-.It Cm f
-Must be followed by a case-insensitive font style:
-.Cm b
-for bold or
-.Cm i
-for italic.
-.It Cm b
-.It Cm i
-.El
+For short names, there are variants
+.No \eg Ns Ar c
+and
+.No \eg( Ns Ar cc .
+.Ss \eH\(aq Ns Oo +|- Oc Ns Ar number Ns \(aq
+Set the height of the current font; ignored by
+.Xr mandoc 1 .
+.Ss \eh\(aq Ns Ar number Ns \(aq
+Horizontal motion; ignored by
+.Xr mandoc 1 .
+.Ss \ek[ Ns Ar name ]
+Mark horizontal input place in register; ignored by
+.Xr mandoc 1 .
+For short names, there are variants
+.No \ek Ns Ar c
+and
+.No \ek( Ns Ar cc .
+.Ss \eL\(aq Ns Ar number Ns Oo Ar c Oc Ns \(aq
+Vertical line drawing function; ignored by
+.Xr mandoc 1 .
+.Ss \el\(aq Ns Ar number Ns Oo Ar c Oc Ns \(aq
+Horizontal line drawing function; ignored by
+.Xr mandoc 1 .
+.Ss \eM[ Ns Ar name ]
+Set fill (background) color (groff extension); ignored by
+.Xr mandoc 1 .
+For short names, there are variants
+.No \eM Ns Ar c
+and
+.No \eM( Ns Ar cc .
+.Ss \em[ Ns Ar name ]
+Set glyph drawing color (groff extension); ignored by
+.Xr mandoc 1 .
+For short names, there are variants
+.No \em Ns Ar c
+and
+.No \em( Ns Ar cc .
+.Ss \eN\(aq Ns Ar number Ns \(aq
+Character
+.Ar number
+on the current font.
+.Ss \en[ Ns Ar name ]
+Interpolate the number register
+.Ar name .
+For short names, there are variants
+.No \en Ns Ar c
+and
+.No \en( Ns Ar cc .
+.Ss \eo\(aq Ns Ar string Ns \(aq
+Overstrike, writing all the characters contained in the
+.Ar string
+to the same output position.
+In terminal and HTML output modes,
+only the last one of the characters is visible.
+.Ss \eR\(aq Ns Ar name Oo +|- Oc Ns Ar number Ns \(aq
+Set number register; ignored by
+.Xr mandoc 1 .
+.Ss \eS\(aq Ns Ar number Ns \(aq
+Slant output; ignored by
+.Xr mandoc 1 .
+.Ss \es\(aq Ns Oo +|- Oc Ns Ar number Ns \(aq
+Change point size; ignored by
+.Xr mandoc 1 .
+Alternative forms
+.No \es Ns Oo +|- Oc Ns Ar n ,
+.No \es Ns Oo +|- Oc Ns \(aq Ns Ar number Ns \(aq ,
+.No \es Ns [ Oo +|- Oc Ns Ar number ] ,
+and
+.No \es Ns Oo +|- Oc Ns [ Ar number Ns ]
+are also parsed and ignored.
+.Ss \et
+Horizontal tab; ignored by
+.Xr mandoc 1 .
+.Ss \eu
+Move up by half a line; ignored by
+.Xr mandoc 1 .
+.Ss \eV[ Ns Ar name ]
+Interpolate an environment variable; ignored by
+.Xr mandoc 1 .
+For short names, there are variants
+.No \eV Ns Ar c
+and
+.No \eV( Ns Ar cc .
+.Ss \ev\(aq Ns Ar number Ns \(aq
+Vertical motion; ignored by
+.Xr mandoc 1 .
+.Ss \ew\(aq Ns Ar string Ns \(aq
+Interpolate the width of the
+.Ar string .
+The
+.Xr mandoc 1
+implementation assumes that after expansion of user-defined strings, the
+.Ar string
+only contains normal characters, no escape sequences, and that each
+character has a width of 24 basic units.
+.Ss \eX\(aq Ns Ar string Ns \(aq
+Output
+.Ar string
+as device control function; ignored in nroff mode and by
+.Xr mandoc 1 .
+.Ss \ex\(aq Ns Ar number Ns \(aq
+Extra line space function; ignored by
+.Xr mandoc 1 .
+.Ss \eY[ Ns Ar name ]
+Output a string as a device control function; ignored in nroff mode and by
+.Xr mandoc 1 .
+For short names, there are variants
+.No \eY Ns Ar c
+and
+.No \eY( Ns Ar cc .
+.Ss \eZ\(aq Ns Ar string Ns \(aq
+Print
+.Ar string
+with zero width and height; ignored by
+.Xr mandoc 1 .
+.Ss \ez
+Output the next character without advancing the cursor position.
 .Sh COMPATIBILITY
-This section documents compatibility between mandoc and other other
+The
+.Xr mandoc 1
+implementation of the
 .Nm
-implementations, at this time limited to GNU troff
-.Pq Qq groff .
-The term
-.Qq historic groff
-refers to groff version 1.15.
+language is intentionally incomplete.
+Unimplemented features include:
 .Pp
 .Bl -dash -compact
 .It
+For security reasons,
+.Xr mandoc 1
+never reads or writes external files except via
+.Sx \&so
+requests with safe relative paths.
+.It
+There is no automatic hyphenation, no adjustment to the right margin,
+and no centering; the output is always set flush-left.
+.It
+Support for setting tabulator positions
+and tabulator and leader characters is missing,
+and support for manually changing indentation is limited.
+.It
 The
-.Cm nS
-register is only compatible with OpenBSD's groff-1.15.
+.Sq u
+scaling unit is the default terminal unit.
+In traditional troff systems, this unit changes depending on the
+output media.
 .It
-Historic groff did not accept white-space before a custom
-.Ar end
-macro for the
-.Sx \&ig
-request.
+Width measurements are implemented in a crude way
+and often yield wrong results.
+Explicit movement requests and escapes are ignored.
 .It
+There is no concept of output pages, no support for floats,
+graphics drawing, and picture inclusion;
+terminal output is always continuous.
+.It
+Requests regarding color, font families, and glyph manipulation
+are ignored.
+Font support is very limited.
+Kerning is not implemented, and no ligatures are produced.
+.It
 The
-.Sx \&if
-and family would print funny white-spaces with historic groff when
-using the next-line syntax.
+.Qq \(aq
+macro control character does not suppress output line breaks.
+.It
+Diversions are not implemented,
+and support for traps is very incomplete.
+.It
+While recursion is supported,
+.Sx \&while
+loops are not.
 .El
+.Pp
+The special semantics of the
+.Cm nS
+number register is an idiosyncracy of
+.Ox
+manuals and not supported by other
+.Xr mdoc 7
+implementations.
 .Sh SEE ALSO
 .Xr mandoc 1 ,
+.Xr eqn 7 ,
 .Xr man 7 ,
 .Xr mandoc_char 7 ,
-.Xr mdoc 7
-.\" .Rs
-.\" .%A M. E. Lesk
-.\" .%T Tbl\(emA Program to Format Tables
-.\" .%D June 11, 1976
-.\" .%U http://www.kohala.com/start/troff/v7/man/tbl/tbl.ps
-.\" .Re
+.Xr mdoc 7 ,
+.Xr tbl 7
 .Rs
 .%A Joseph F. Ossanna
 .%A Brian W. Kernighan
@@ -766,19 +2128,27 @@ using the next-line syntax.
 .%U http://heirloom.sourceforge.net/doctools/troff.pdf
 .Re
 .Sh HISTORY
-The RUNOFF typesetting system was written in PL/1 for the CTSS
-operating system by Jerome ("Jerry") E. Saltzer in 1961.
-It was first used as the main documentation tool by Multics since 1963.
-Robert ("Bob") H. Morris ported it to the GE-635 and called it
+The RUNOFF typesetting system, whose input forms the basis for
 .Nm ,
-Doug McIlroy rewrote it in BCPL in 1969,
-Joseph F. Ossanna rewrote it in PDP-11 assembly in 1973,
-and Brian W. Kernighan rewrote it in C in 1975.
+was written in MAD and FAP for the CTSS operating system by Jerome E.
+Saltzer in 1964.
+Doug McIlroy rewrote it in BCPL in 1969, renaming it
+.Nm .
+Dennis M. Ritchie rewrote McIlroy's
+.Nm
+in PDP-11 assembly for
+.At v1 ,
+Joseph F. Ossanna improved roff and renamed it nroff
+for
+.At v2 ,
+then ported nroff to C as troff, which Brian W. Kernighan released with
+.At v7 .
+In 1989, James Clarke re-implemented troff in C++, naming it groff.
 .Sh AUTHORS
 .An -nosplit
-This partial
+This
 .Nm
 reference was written by
-.An Kristaps Dzonsons Aq kristaps@bsd.lv
+.An Kristaps Dzonsons Aq Mt kristaps@bsd.lv
 and
-.An Ingo Schwarze Aq schwarze@openbsd.org .
+.An Ingo Schwarze Aq Mt schwarze@openbsd.org .