.\"	$Id: man.7,v 1.23 2009/08/13 12:15:58 kristaps Exp $
.\"
.\" Copyright (c) 2009 Kristaps Dzonsons <kristaps@kth.se>
.\"
.\" Permission to use, copy, modify, and distribute this software for any
.\" purpose with or without fee is hereby granted, provided that the above
.\" copyright notice and this permission notice appear in all copies.
.\"
.\" THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
.\" WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
.\" MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
.\" ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
.\" WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
.\" ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
.\" OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
.\"
.Dd $Mdocdate: August 13 2009 $
.Dt MAN 7
.Os
.\" SECTION
.Sh NAME
.Nm man
.Nd man language reference
.\" SECTION
.Sh DESCRIPTION
The
.Nm man
language was historically used to format
.Ux
manuals.  This reference document describes its syntax, structure, and
usage.
.Pp
.Bf -emphasis
Do not use
.Nm
to write your manuals.
.Ef
Use the
.Xr mdoc 7
language, instead.
.\" PARAGRAPH
.Pp
An
.Nm
document follows simple rules:  lines beginning with the control
character
.Sq \&.
are parsed for macros.  Other lines are interpreted within the scope of
prior macros:
.Bd -literal -offset indent
\&.SH Macro lines change control state.
Other lines are interpreted within the current state.
.Ed
.\" SECTION
.Sh INPUT ENCODING
.Nm
documents may contain only graphable 7-bit ASCII characters, the
space character, and the tabs character.  All manuals must have
.Ux
line termination.
.Pp
Blank lines are acceptable; where found, the output will assert a
vertical space.
.Pp
The
.Sq \ec
escape is common in historical
.Nm
documents; if encountered at the end of a word, it ensures that the
subsequent word isn't off-set by whitespace.
.\" SUB-SECTION
.Ss Comments
Text following a
.Sq \e\*" ,
whether in a macro or free-form text line, is ignored to the end of
line.  A macro line with only a control character and comment escape,
.Sq \&.\e" ,
is also ignored.  Macro lines with only a control charater and
optionally whitespace are stripped from input.
.\" SUB-SECTION
.Ss Special Characters
Special characters may occur in both macro and free-form lines.
Sequences begin with the escape character
.Sq \e
followed by either an open-parenthesis
.Sq \&(
for two-character sequences; an open-bracket
.Sq \&[
for n-character sequences (terminated at a close-bracket
.Sq \&] ) ;
or a single one-character sequence.  See
.Xr mandoc_char 7
for a complete list.  Examples include
.Sq \e(em
.Pq em-dash
and
.Sq \ee
.Pq back-slash .
.\" SUB-SECTION----------------------
.Ss Text Decoration
Terms may be text-decorated using the
.Sq \ef
escape followed by an indicator: B (bold), I, (italic), or P and R
(Roman, or reset).
.\" SUB-SECTION----------------------
.Ss Whitespace
Unless specifically escaped, consecutive blocks of whitespace are pruned
from input.  These are later re-added, if applicable, by a front-end
utility such as
.Xr mandoc 1 .
.\" SECTION
.Sh MANUAL STRUCTURE
Each
.Nm
document must contain contains at least the
.Sq \&TH
macro describing the document's section and title.  It may occur
anywhere in the document, although conventionally, it appears as the
first macro.
.Pp
Beyond
.Sq \&TH ,
at least one macro or text node must appear in the document.  Documents
are generally structured as follows:
.Bd -literal -offset indent
\&.TH FOO 1 "13 Aug 2009"
\&.
\&.SH NAME
foo \e- a description goes here
\&.
\&.SH SYNOPSIS
\efBfoo\efR [\efB\e-options\efR] arguments...
\&.
\&.SH DESCRIPTION
The \efBfoo\efR utility does...
\&.
\&.\e\*q .SH RETURN VALUES
\&.\e\*q .SH ENVIRONMENT
\&.\e\*q .SH FILES
\&.\e\*q .SH EXAMPLES
\&.\e\*q .SH DIAGNOSTICS
\&.\e\*q .SH ERRORS
\&.\e\*q .SH SEE ALSO
\&.\e\*q \efBbar\efR(1)
\&.\e\*q .SH STANDARDS
\&.\e\*q .SH HISTORY
\&.\e\*q .SH AUTHORS
\&.\e\*q .SH CAVEATS
\&.\e\*q .SH BUGS
.Ed
.\" SECTION
.Sh MACRO SYNTAX
Macros are one to three three characters in length and begin with a
control character ,
.Sq \&. ,
at the beginning of the line.  An arbitrary amount of whitespace may
sit between the control character and the macro name.  Thus,
.Sq \&.PP
and
.Sq \&.\ \ \ \&PP
are equivalent.
.Pp
The
.Nm
macros are classified by scope: line scope or block scope.  Line-scoped
macros are only scoped to the current line (and, in some situations,
the subsequent line).  Block macros are scoped to the current line and
subsequent lines until closed by another block macro.
.\" SUBSECTION
.Ss Line Macros
Line-macros are scoped to the current line, with the body consisting of
zero or more arguments.  If a macro is next-line scoped and the line
arguments are empty, the next line is used instead.  Thus:
.Bd -literal -offset indent
\&.RI
foo
.Ed
.\" PARAGRAPH
.Pp
is equivalent to
.Sq \&.RI foo .
.\" PARAGRAPH
Consecutive next-line invocations are disallowed.
.Bd -literal -offset indent
\&.YO \(lBbody...\(rB
\(lBbody...\(rB
.Ed
.\" PARAGRAPH
.Pp
.Bl -column -compact -offset indent "MacroX" "ArgumentsX" "ScopeXXXXX"
.It Em Macro Ta Em Arguments Ta Em Scope
.It  \&B     Ta    n         Ta    next-line
.It  \&BI    Ta    n         Ta    current
.It  \&BR    Ta    n         Ta    current
.It  \&I     Ta    n         Ta    next-line
.It  \&IB    Ta    n         Ta    current
.It  \&IR    Ta    n         Ta    current
.It  \&R     Ta    n         Ta    next-line
.It  \&RB    Ta    n         Ta    current
.It  \&RI    Ta    n         Ta    current
.It  \&SB    Ta    n         Ta    next-line
.It  \&SM    Ta    n         Ta    next-line
.It  \&TH    Ta    >1, <6    Ta    current
.It  \&br    Ta    0         Ta    current
.It  \&fi    Ta    0         Ta    current
.It  \&i     Ta    n         Ta    current
.It  \&na    Ta    0         Ta    current
.It  \&nf    Ta    0         Ta    current
.It  \&r     Ta    0         Ta    current
.It  \&sp    Ta    1         Ta    current
.El
.\" PARAGRAPH
.Pp
The lower-case 
.Sq \&br ,
.Sq \&fi ,
.Sq \&i ,
.Sq \&na ,
.Sq \&nf ,
.Sq \&r ,
and
.Sq \&sp
macros aren't historically part of
.Nm
and should not be used.  They're included for compatibility.
.\" SUBSECTION
.Ss Block Macros
Block macros are comprised of a head and body.  The head is scoped to
the current line and, in one circumstance, the next line; the body is
scoped to subsequent lines and is closed out by a subsequent block macro
invocation.
.Bd -literal -offset indent
\&.YO \(lBhead...\(rB
\(lBhead...\(rB
\(lBbody...\(rB
.Ed
.\" PARAGRAPH
.Pp
If a block macro is next-line scoped, it may only be followed by in-line
macros (excluding
.Sq na ,
.Sq sp ,
.Sq nf ,
.Sq fi ,
and
.Sq TH ) .
.\" PARAGRAPH
.Pp
.Bl -column "MacroX" "Arguments" "ScopeXXXX" -compact -offset indent
.It Em Macro Ta Em Arguments Ta Em Scope
.It \&HP     Ta    <2        Ta    current
.It \&IP     Ta    <3        Ta    current
.It \&LP     Ta    0         Ta    current
.It \&P      Ta    0         Ta    current
.It \&PP     Ta    0         Ta    current
.It \&SH     Ta    >0        Ta    current
.It \&SS     Ta    >0        Ta    current
.It \&TP     Ta    n         Ta    next-line
.El
.\" SECTION
.Sh REFERENCE
This section is a canonical reference to all macros, arranged
alphabetically.  For the scoping of individual macros, see
.Sx MACRO SYNTAX .
.Bl -tag -width Ds
.It \&B
Text is rendered in bold face.
.It \&BI
Text is rendered alternately in bold face and italic.  Thus, 
.Sq \&.BI this word and that
causes
.Sq this
and
.Sq and
to render in bold face, while 
.Sq word
and
.Sq that
render in italics.  Whitespace between arguments is omitted in output.
.It \&BR
Text is rendered alternately in bold face and roman (the default font).
Whitespace between arguments is omitted in output.
.It \&HP
Begin a paragraph whose initial output line is left-justified, but
subsequent output lines are indented.
.\" TODO.
.It \&I
Text is rendered in italics.
.It \&IB
Text is rendered alternately in italics and bold face.  Whitespace
between arguments is omitted in output.
.It \&IP
.\" TODO.
.It \&IR
Text is rendered alternately in italics and roman (the default font).
Whitespace between arguments is omitted in output.
.It \&LP, \&P, \&PP
Begin an undecorated paragraph.  The scope of a paragraph is closed by a
subsequent paragraph, sub-section, section, or end of file.
.It \&R
Text is rendered in roman (the default font).
.It \&RB
Text is rendered alternately in roman (the default font) and bold face.
Whitespace between arguments is omitted in output.
.It \&RI
Text is rendered alternately in roman (the default font) and italics.
Whitespace between arguments is omitted in output.
.It \&SB
Text is rendered in small size (one point smaller than the default font)
bold face.
.It \&SH
Begin a section.  The scope of a section is only closed by another
section or the end of file.
.It \&SM
Text is rendered in small size (one point smaller than the default
font).
.It \&SS
Begin a sub-section.  The scope of a sub-section is closed by a
subsequent sub-section, section, or end of file.
.It \&TH
Sets the title of the manual page with the following syntax:
.Bd -literal -offset indent
\&.TH title section date source volume
.Ed
.Pp
At least the 
.Va title
and
.Va section
arguments must be provided.  The
.Va date
argument should be formatted as
.Qq %b [%d] %Y
format, described in
.Xr strptime 3 .
The
.Va source
string specifies the organisation providing the utility.  The
.Va volume
replaces the default rendered volume as dictated by the manual section.
.It \&TP
.\" TODO.
.It \&br
Breaks the current line.  Consecutive invocations have no further effect.
.\" TODO.
.It \&fi
End literal mode begun by
.Sq \&nf .
.It \&i
Italicise arguments.  If no arguments are specified, all subsequent text
is italicised.
.It \&na
No alignment to the right margin.
.It \&nf
Begin literal mode: all subsequent free-form lines have their end of
line boundaries preserved.  May be ended by
.Sq \&fi .
.It \&r
Fonts and styles (bold face, italics) reset to roman (default font).
.It \&sp
Insert n spaces, where n is the macro's positive numeric argument.  If
0, this is equivalent to the
.Sq br
macro.
.El
.\" SECTION
.Sh COMPATIBILITY
This section documents compatibility with other roff implementations, at
this time limited to
.Xr groff 1 .
.Bl -hyphen
.It
In quoted literals, groff allowed pair-wise double-quotes to produce a
standalone double-quote in formatted output.  This idiosyncratic
behaviour is no longer applicable.
.It
The
.Sq \&sp
macro does not accept negative numbers.
.It
Blocks of whitespace are stripped from both macro and free-form text
lines (except when in literal mode), while groff would retain whitespace
in free-form text lines.
.El
.\" SECTION
.Sh SEE ALSO
.Xr mandoc 1 ,
.Xr mandoc_char 7
.\" SECTION
.Sh AUTHORS
The
.Nm
reference was written by
.An Kristaps Dzonsons Aq kristaps@kth.se .
.\" SECTION
.Sh CAVEATS
Do not use this language.  Use
.Xr mdoc 7 ,
instead.